Infiniti QX50 (2023 year). Manual in english - page 6

 

  Index      Manuals     Infiniti QX50 (2023 year). Manual in english

 

Search            copyright infringement  

 

   

 

   

 

Content      ..     4      5      6      7     ..

 

 

 

Infiniti QX50 (2023 year). Manual in english - page 6

 

 

WARNING

In an accident you could be thrown from
the vehicle through an open moonroof.
Always

use

seat

belts

and

child

restraints.

Do not allow anyone to stand up or ex-
tend any portion of their body out of the
moonroof opening while the vehicle is in
motion or while the moonroof is closing.

CAUTION

Remove water drops, snow, ice or sand
from the moonroof before opening.

Do not place heavy objects on the moon-
roof or surrounding area.

Panoramic sunshade

The panoramic sunshade operates when the
ignition switch is in the ON position. When
opening or closing the sunshade the switch
need not be held.

To open the sunshade:
• To fully open the sunshade, slide the switch

O

1

toward the OPEN position to the first

detent.

• To fully open the sunshade and the moon-

roof together, slide the switch

O

1

toward

the OPEN position to the second detent.

To close the sunshade:
• To fully close the sunshade, slide the switch

O

2

toward the CLOSE position to the sec-

ond detent. If the moonroof is open, both
the moonroof and the sunshade will close
automatically.

• If the switch is slid

O

2

toward the CLOSE

position to the first detent while the moon-
roof is open, only the moonroof will close.
The sunshade will remain open.

To stop the sunshade during operation, push
the switch

O

1

,

O

2

, or

O

3

at the desired

position.

WARNING

To avoid personal injury, keep your
hands, fingers and head away from the
sunshade arm, the arm rail and sunshade
inlet port.

Do not allow children near the sunshade
system. They could be injured.

Do not place objects on or near the sun-
shade. This could cause improper opera-
tion or damage it.

Do not pull or push the sunshade. This
could cause improper operation or dam-
age it.

CAUTION

Do not place objects (such as newspapers,
handkerchiefs, etc.) on the sunshade inlet
port. Doing so may entangle these objects
in the sunshade when it is extending or
retracting, causing improper operation or
damage to the sunshade.

Do not push the sunshade arm with your
hands, etc., as this may deform it. Im-
proper operation or damage to the sun-
shade may result.

Do not put any object into the sunshade
inlet port as this may result in improper
operation or damage the sunshade.

Do not hang any object on the arm rail as
this may result in improper operation or
damage the sunshade.

Do not forcefully pull the sunshade.
Doing so may elongate the sunshade.
Improper operation or damage to the
sunshade may result.

Instruments and controls

2-77

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The interior lights will automatically turn on
and stay on for a period of time when:
• The doors are unlocked by the Intelligent

Key, a key or the request switch while all
doors are closed and the ignition switch is
in the OFF position.

• The doors and/or liftgate is opened.
• The switch is individually pushed.

When the ON switch

O

1

is pushed, the inte-

rior lights illuminate.

When the DOOR/OFF switch

O

2

is pushed,

the interior lights do not illuminate unless
individually pushed.

NOTE:

The footwell lights (if so equipped) and step
lights (if so equipped) illuminate when the
driver and passenger doors are open regard-
less of the interior light switch position.
These lights will turn off automatically after
a period of time while doors are open to pre-
vent the battery from becoming discharged.

CAUTION

Do not use for extended periods of time
with the engine stopped. This could result
in a discharged battery.

CONSOLE LIGHT

The console light

O

1

will turn on in the follow-

ing conditions:
• The doors are unlocked
• The ignition is placed in the OFF position.

The console light

O

1

will turn off or decrease

in brightness in the following conditions:
• The ignition switch is in the ON position

and the door is closed.

• The doors are locked.

The console light brightness can be adjusted
with the illumination brightness control in the
lower display.

LIC3841

LIC4966

INTERIOR LIGHTS

2-78

Instruments and controls

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAP LIGHTS

To turn the map lights on, push the switches.
To turn them off, push the switches again.

CAUTION

Do not use for extended periods of time
with the engine stopped. This could result
in a discharged battery.

PERSONAL LIGHTS

To turn the rear personal lights on, push the
switch. To turn them off, push the switch
again.

CARGO LIGHT

The light illuminates when the liftgate is
opened. When the liftgate is closed, the light
goes off.

The light will go off after a period of time if
the liftgate is left open, unless the ignition
switch is placed in the ON position.

For additional information, see “Exterior and
interior lights” (P. 8-24).

LIC3842

LIC3907

Rear personal lights

Instruments and controls

2-79

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The HomeLink® Universal Transceiver pro-
vides a convenient way to consolidate the
functions of up to three individual hand-held
transmitters into one built-in device.

HomeLink® Universal Transceiver:
• Will operate most Radio Frequency (RF)

devices such as garage doors, gates, home
and office lighting, entry door locks and
security systems.

• Is powered by your vehicle's battery. No

separate batteries are required. If the
vehicle's battery is discharged or is dis-
connected, HomeLink® will retain all
programming.

When the HomeLink® Universal Transceiver is
programmed, retain the original transmitter
for future programming procedures (Example:
new vehicle purchases). Upon sale of the ve-
hicle, the programmed HomeLink® Universal
Transceiver buttons should be erased for se-
curity purposes. For additional information,
see “Programming HomeLink®” (P. 2-80).

WARNING

Do not use the HomeLink® Universal
Transceiver with any garage door opener
that lacks safety stop and reverse fea-
tures as required by federal safety stan-
dards. (These standards became effec-
tive for opener models manufactured
after April 1, 1982.) A garage door
opener which cannot detect an object in
the path of a closing garage door and
then automatically stop and reverse
does not meet current federal safety
standards. Using a garage door opener
without these features increases the risk
of serious injury or death.

During the programming procedure your
garage door or security gate will open
and close (if the transmitter is within
range). Make sure that people or objects
are clear of the garage door, gate, etc.,
that you are programming.

Your vehicle's engine should be turned
off while programming the HomeLink®
Universal Transceiver. Do not breathe
exhaust gases; they contain colorless
and odorless carbon monoxide. Carbon
monoxide is dangerous. It can cause un-
consciousness or death.

PROGRAMMING HOMELINK®

The following steps show generic instruc-
tions on how to program a Homelink®
button. If you have any questions or are
having

difficulty

programming

your

HomeLink® buttons, refer to the HomeLink®
web site at: www.homelink.com/infiniti or
call 1-800-355-3515.

NOTE:

It is also recommended that a new battery be
placed in the hand-held transmitter of the
device being programmed to Homelink® for
quicker programming and accurate trans-
mission of the radio-frequency.

HOMELINK® UNIVERSAL
TRANSCEIVER (if so equipped)

2-80

Instruments and controls

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1

Homelink® buttons (1–3)

2

Indicator light (appears above each
Homelink® button)

1. Position the end of your hand-held trans-

mitter 1-3 inches (2-8 cm) away from the
HomeLink® button that you would wish
to program while keeping the indicator
light in view.

2. Simultaneously press and hold both the

chosen HomeLink® and hand-held trans-
mitter buttons until the HomeLink® indi-
cator light changes from a slow to a rap-
idly blinking light. Now you may release
both the HomeLink® and hand-held
transmitter buttons.

NOTE:

Some hand-held transmitter (garage door
opener remote) may actually train better a
distance of 6–12 inches (15–20 cm). Keep
this in mind if you have difficulty with the
programming process.

3. Firmly

press, hold for five seconds and

release

the programmed Homelink® but-

ton up to two separate times to activate
the door. If the door does not activate,
press and hold the just trained Homelink®
button and observe the indicator light.

• If the indicator light

stays on con-

stantly, programming is complete

and

your device should activate when the
Homelink®

button

is

pressed

and

released.

• If the indicator light blinks

rapidly for

two seconds and then turns to a con-
stant light, continue with “Program-
ming” steps 4–6

to complete the pro-

gramming of a rolling code equipped
device (most commonly a garage door
opener).

LIC5025

LIC5026

Instruments and controls

2-81

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

NOTE:

Some devices may require you to replace this
Programming Step 2 with procedures noted
in the “Programming HomeLink® for Cana-
dian customers and gate openers” (P. 2-82)
section. If the Homelink® indicator light
does not change to a rapidly blinking light
after

performing

these

steps,

contact

Homelink® at www.homelink.com.

4. At the garage door opener motor (security

gate motor, etc.), locate the “Learn” or
“Set” button. This can usually be found
where the hanging antenna wire is at-
tached to the motor-head unit (see the
device’s manual to identify this button.).
The name and color of the button may
vary by manufacturer.

NOTE:

A ladder and/or second person may simplify
the following steps. Do not stand on your
vehicle to perform the next steps.

5. Firmly press and release the “Learn” or

“Set” button until the indicator illuminates.
Once the button is pressed, you have ap-
proximately 30 seconds to initiate the
next step.

6. Return to the vehicle and firmly press,

hold for two seconds and release the
HomeLink® button up to three times.

Do

not press the HomeLink® button rapidly.

At this point programming is complete
and your device should operate when
the HomeLink® button is pressed and
released.

7. If you have any questions or are having

difficulty programming your HomeLink®
buttons, refer to the HomeLink® web
site at: www.homelink.com/infiniti or call
1-800-355-3515.

PROGRAMMING HOMELINK®
FOR CANADIAN CUSTOMERS
AND GATE OPENERS

Canadian

radio-frequency

laws

require

transmitter signals to “time-out” (or quit) af-
ter several seconds of transmission – which
may not be long enough for HomeLink® to
pick up the signal during training. Similar to
this Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.

If you live in Canada or you are having diffi-
culties training a gate operator

or

garage

door opener by using the “Programming
HomeLink®” procedures,

replace

“Program-

ming HomeLink®”

step 2

with the following:

NOTE:

When programming a garage door opener,
etc., unplug the device during the “cycling”
process to prevent possible damage to the
device components.

LIC4798

Example

2-82

Instruments and controls

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Step 2: Continue to press and hold the
HomeLink® button while you press and re-
lease – every two seconds (“cycle”) your
hand-held transmitter until the HomeLink®
indicator light changes from a slow to a rap-
idly blinking light. Now you may release both
the Homelink® and hand-held transmitter
buttons.

Proceed with “Programming HomeLink®”
step 3 to complete.

Remember to plug the device back in when
programming is completed.

OPERATING THE HOMELINK®
UNIVERSAL TRANSCEIVER

The HomeLink® Universal Transceiver, after
it is programmed, can be used to activate the
programmed device. To operate, firmly press
the appropriate programmed HomeLink®
button. The indicator light will illuminate in
green with three parenthesis

on the

mirror while the signal is being transmitted.

PROGRAMMING TROUBLE-
SHOOTING

If the HomeLink® does not quickly learn the
hand-held transmitter information:
• Replace the hand-held transmitter batter-

ies with new batteries.

• Position the hand-held transmitter with its

battery

area

facing

away

from

the

HomeLink® button.

• Press and hold both the HomeLink® button

and hand-held transmitter button in each
step without interruption.

• Position the hand-held transmitter 1 to 3 in

(2 to 8 cm) away from the HomeLink®
button. Hold the transmitter in that position
for up to 15 seconds. If HomeLink® is not
programmed within that time, try holding
the transmitter in another position – for
example, 6 to 12 in (15 to 20 cm) away,
keeping the HomeLink® button in view at
all times.

It is recommended not to place metal objects
near the garage door opener antenna for
optimal functionality.

If you have any questions or are having
difficulty programming your HomeLink®
buttons, refer to the HomeLink® web
site at: www.homelink.com/infiniti or call
1-800-355-3515.

CLEARING THE PROGRAMMED
INFORMATION

The following procedure clears the pro-
grammed information from three buttons.
Individual buttons cannot be cleared. How-
ever, individual buttons can be reprogrammed.
For additional information, see “Reprogram-
ming a single HomeLink® button” (P. 2-84).

To clear all programming

1. Press and hold the two outer HomeLink®

buttons until the indicator light begins to
flash in green, in approximately 10 sec-
onds. Do not hold for longer than 20
seconds.

2. Release both buttons.

HomeLink® is now in the programming mode
and can be programmed at any time beginning
with “Programming HomeLink®” - Step 1.

Instruments and controls

2-83

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

REPROGRAMMING A SINGLE
HOMELINK® BUTTON

To reprogram a HomeLink® button, com-
plete the following:

1. Press and hold the desired HomeLink®

button.

DO NOT

release the button.

2. The indicator light will begin to flash after

20

seconds.

Without

releasing

the

Homelink® button, proceed with “Pro-
gramming Homelink®” — step 1.

For

questions

or

comments,

contact

HomeLink® at: www.homelink.com/infiniti
or 1–800–355–3515.

The HomeLink® button has now been repro-
grammed. The new device can be activated
by pressing the HomeLink® button that was
just programmed. This procedure will not af-
fect any other programmed HomeLink®
buttons.

If a new device is not programmed to the
HomeLink® button, it will revert to the previ-
ously stored programming.

IF YOUR VEHICLE IS STOLEN

If your vehicle is stolen, you should change
the codes of any non-rolling code device that
has been programmed into HomeLink®.
Consult the Owner's Manual of each device
or call the manufacturer or dealer of those
devices for additional information.

When your vehicle is recovered, you will
need to reprogram the HomeLink® Univer-
sal Transceiver with your new transmitter
information.

FCC Notice:

For USA:

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not
cause harmful interference, and (2) this de-
vice must accept any interference received,
including interference that may cause unde-
sired operation.

NOTE:

Changes or modifications not expressly ap-
proved by the party responsible for compli-
ance could void the user’s authority to oper-
ate the equipment.

For Canada:

This

device

contains

licence-exempt

transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Develop-
ment

Canada’s

licence-exempt

RSS(s).

Operation is subject to the following two
conditions: (1) This device may not cause in-
terference. (2) This device must accept any
interference, including interference that may
cause undesired operation of the device.

2-84

Instruments and controls

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

3 Pre-driving checks and adjustments

Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

INFINITI Intelligent Key . . . . . . . . . . . . . . . . . . . . . . .3-2
INFINITI Vehicle Immobilizer System keys . . . . . . . 3-4

Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4

Locking with key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5
Locking with inside lock knob . . . . . . . . . . . . . . . . . .3-5
Locking with power door lock switch . . . . . . . . . .3-5
Automatic door locks . . . . . . . . . . . . . . . . . . . . . . . . .3-6
Child safety rear door lock . . . . . . . . . . . . . . . . . . . . .3-6

INFINITI Intelligent Key System . . . . . . . . . . . . . . . . . . .3-6

Operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-8
Door locks/unlocks precaution . . . . . . . . . . . . . . . .3-9
INFINITI Intelligent Key operation . . . . . . . . . . . . .3-9
How to use the remote keyless entry
function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
Warning signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . 3-16
Log-in function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18

Remote Engine Start . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18

Remote Engine Start operating range . . . . . . . . 3-19
Remote starting the vehicle . . . . . . . . . . . . . . . . . . 3-19
Extending engine run time . . . . . . . . . . . . . . . . . . . 3-20
Canceling a Remote Engine Start . . . . . . . . . . . . 3-20
Conditions the Remote Engine Start will
not work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20

Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21
Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22

Operating the power liftgate . . . . . . . . . . . . . . . . 3-22
Motion-Activated Liftgate (if so equipped) . . . . .3-25
Power liftgate main switch . . . . . . . . . . . . . . . . . . 3-26
Liftgate release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27
Liftgate position setting . . . . . . . . . . . . . . . . . . . . . 3-28

Fuel-filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28

Opening the fuel-filler door . . . . . . . . . . . . . . . . . . 3-28
Fuel-filler cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29

Steering wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31

Manual operation (if so equipped) . . . . . . . . . . . 3-31
Automatic operation (if so equipped) . . . . . . . . . 3-32

Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32

Vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33
Card holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33

Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-34

Automatic anti-glare rearview mirror . . . . . . . . 3-34
Outside mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35

Memory Seat (if so equipped) . . . . . . . . . . . . . . . . . . . 3-37

Memory storage function . . . . . . . . . . . . . . . . . . . 3-37
Entry/exit function . . . . . . . . . . . . . . . . . . . . . . . . . . 3-38
Setting memory function . . . . . . . . . . . . . . . . . . . . 3-39
System operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-39

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

INFINITI INTELLIGENT KEY

Your vehicle can only be driven with the Intel-
ligent Keys which are registered to your
vehicle’s Intelligent Key System components
and INFINITI Vehicle Immobilizer System
components.

Never leave the keys in the vehicle.

As many as four Intelligent Keys can be reg-
istered and used with one vehicle. The new
keys must be registered prior to use with the
Intelligent Key System and INFINITI Vehicle
Immobilizer System of your vehicle. It is rec-
ommended that you visit an INFINITI retailer
for this service. Since the registration process
requires erasing all memory in the Intelligent
Key components when registering new keys,
be sure to take all Intelligent Keys that you
have to an INFINITI retailer.

A key number plate is supplied with your keys.
Record the key number and keep it in a safe
place (such as your wallet), not in the vehicle.
If you lose your keys, it is recommended that
you visit an INFINITI retailer for duplicates by
using the key number. INFINITI does not re-
cord key numbers so it is very important to
keep track of your key number plate.

A key number is only necessary when you
have lost all keys and do not have one to
duplicate from. If you still have a key, it can be
duplicated without knowing the key number.

CAUTION

Be sure to carry the Intelligent Key with
you when driving. The Intelligent Key is a
precision device with a built-in transmit-
ter. To avoid damaging it, please note the
following:

The Intelligent Key is water resistant;
however, wetting may damage the In-
telligent Key. If the Intelligent Key gets
wet, immediately wipe until it is com-
pletely dry.

Do not bend, drop or strike it against
another object.

If the outside temperature is below 14°F
(-10°C), the battery of the Intelligent
Key may not function properly.

Do not place the Intelligent Key for an
extended period in a place where tem-
peratures exceed 140°F (60°C).

Do not change or modify the Intelligent
Key.

Do not use a magnet key holder.

Do not place the Intelligent Key near an
electric appliance such as a television set
or a personal computer.

LPD2889

1. Intelligent Keys (two sets)

2. Mechanical key

3. Key number plate (one plate)

KEYS

3-2

Pre-driving checks and adjustments

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Do not allow the Intelligent Key to come
into contact with water or salt water,
and do not wash it in a washing machine.
This could affect the system function.

If an Intelligent Key is lost or stolen, INFINITI
recommends erasing the ID code of that In-
telligent Key from the vehicle. This may pre-
vent the unauthorized use of the Intelligent
Key to operate the vehicle. For information
regarding the erasing procedure, it is recom-
mended that you visit an INFINITI retailer.

Mechanical key

The Intelligent Key contains the mechanical
key.

To remove the mechanical key, release the
lock knob on the back of the Intelligent Key.

To install the mechanical key, firmly insert it
into the Intelligent Key until the lock knob
returns to the lock position.

Use the mechanical key to lock or unlock the
driver's door and glove box if they are
equipped with a key cylinder.

CAUTION

Always carry the mechanical key installed
in the Intelligent Key slot.

For additional information, see “Doors”
(P. 3-4) and “Glove box” (P. 2-62).

Valet hand-off

When you have to leave a key with a valet,
give them the Intelligent Key itself and keep
the mechanical key with you to protect your
belongings.

To prevent the glove box from being opened
during valet hand-off, follow the procedure
below.

1. Remove the mechanical key from the In-

telligent Key.

2. Lock the glove box with the mechanical

key.

3. Hand the Intelligent Key to the valet and

keep the mechanical key with you.

For additional information, see “Glove box”
(P. 2-62).

LPD2849

Pre-driving checks and adjustments

3-3

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

INFINITI VEHICLE IMMOBILIZER
SYSTEM KEYS

Additional or replacement keys:

If you still have a key, the key number is not
necessary when you need extra INFINITI Ve-
hicle Immobilizer System keys. Your existing
key can be duplicated without knowing the
key number. As many as four INFINITI Ve-
hicle Immobilizer System keys can be used
with one vehicle. You should bring all
INFINITI Vehicle Immobilizer System keys
that you have to the INFINITI retailer for
registration. This is because the registration
process will erase the memory of all key
codes previously registered into the INFINITI
Vehicle Immobilizer System. After the regis-
tration process, these components will only
recognize keys coded into the INFINITI Ve-
hicle Immobilizer System during registration.
Any virtual key accessories (if so equipped)
will also have to be registered. Any key that is
not given to the retailer at the time of regis-
tration will no longer be able to start your
vehicle.

CAUTION

Do not allow the immobilizer system key,
which contains an electrical transponder,
to come into contact with water or salt
water. This could affect system function.

When the doors are locked using one of the
following methods, the doors cannot be
opened using the inside or outside door
handles. The doors must be unlocked to open
the doors.

WARNING

Always have the doors locked while driv-
ing. Along with the use of seat belts, this
provides greater safety in the event of an
accident by helping to prevent persons
from being thrown from the vehicle. This
also helps keep children and others from
unintentionally opening the doors, and
will help keep out intruders.

Before opening any door, always look for
and avoid oncoming traffic.

To help avoid risk of injury or death
through unintended operation of the ve-
hicle and/or its systems, including en-
trapment in windows or inadvertent
door lock activation, do not leave chil-
dren, people who require the assistance
of others or pets unattended in your ve-
hicle. Additionally, the temperature in-
side a closed vehicle on a warm day can
quickly become high enough to cause a
significant risk of injury or death to
people and pets.

DOORS

3-4

Pre-driving checks and adjustments

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

LOCKING WITH KEY

To lock the driver’s door using the mechanical
key, turn the key toward the front of the
vehicle

O

1

.

To unlock the driver’s door using the me-
chanical key, turn the key toward the rear of
the vehicle

O

2

.

LOCKING WITH INSIDE LOCK
KNOB

To lock the door without the key, move the
inside lock to the lock position

O

1

, then close

the door.

To unlock the door without the key, move the
inside lock knob to the unlock position

O

2

.

LOCKING WITH POWER DOOR
LOCK SWITCH

To lock all the doors without a key, push the
door lock switch (driver's or front passenger's
side) to the lock position

O

1

. When locking

the door this way, be certain not to leave the
key inside the vehicle.

To unlock all the doors without a key, push
the door lock switch (driver's or front passen-
ger's side) to the unlock position

O

2

.

LPD2710

Driver's door

LPD2714

Inside lock

SPA2727

Pre-driving checks and adjustments

3-5

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Lockout protection

When any door is open and the power door
lock switch is moved to the lock position, all
doors will lock. If the Intelligent Key is left in
the vehicle after all the doors are closed, all
doors will unlock automatically and a chime
will sound.

These functions help to prevent the Intelli-
gent Key from being accidentally locked in-
side the vehicle.

AUTOMATIC DOOR LOCKS

• All doors lock automatically when the ve-

hicle speed reaches 15 mph (24 km/h).

• All doors unlock automatically when the

transmission is placed in the P (Park) posi-
tion or when the ignition switch is placed in
the OFF position depending on the option
selected in the “Comfort & Convenience”
options of the “Settings” menu.

NOTE:

The Auto unlock features can be changed
using “Comfort & Convenience” options in
the “Settings” menu of the lower touch-
screen display. For additional information,
refer to the separate INFINITI InTouch®
Owner’s Manual.

CHILD SAFETY REAR DOOR
LOCK

Child safety locks help prevent the rear doors
from being opened accidentally, especially
when small children are in the vehicle.

The child safety lock levers are located on the
edge of the rear doors.

When the lever is in the LOCK position, the
door can be opened only from the outside.

WARNING

Radio waves could adversely affect elec-
tric medical equipment. Those who use a
pacemaker should contact the electric
medical equipment manufacturer for the
possible influences before use.

The Intelligent Key transmits radio
waves when the buttons are pressed.
The FAA advises the radio waves may
affect aircraft navigation and communi-
cation systems. Do not operate the Intel-
ligent Key while on an airplane. Make
sure the buttons are not operated unin-
tentionally when the unit is stored for a
flight.

Before leaving the vehicle, engage the P
(Park) position and check that the elec-
tronic parking brake warning light is illu-
minated to confirm that the electronic
parking brake is applied. The electronic
parking brake warning light will remain
on for a period of time after the driver’s
door is locked.

LPD2753

INFINITI INTELLIGENT KEY SYSTEM

3-6

Pre-driving checks and adjustments

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Make sure to engage the P (Park) posi-
tion and apply the parking brake when
parking your vehicle, riding on or off the
vehicle or loading luggage. Failure to do
so could cause the vehicle to move or roll
away unexpectedly and result in serious
personal injury or property damage.

The Intelligent Key system can operate all the
door locks using the remote control function
or pushing the request switch on the vehicle
without taking the key out from a pocket or
purse. The operating environment and/or
conditions may affect the Intelligent Key sys-
tem operation.

Be sure to read the following before using the
Intelligent Key system.

CAUTION

Be sure to carry the Intelligent Key with
you when operating the vehicle.

Never leave the Intelligent Key in the ve-
hicle when you leave the vehicle.

The Intelligent Key is always communicating
with the vehicle as it receives radio waves.
The Intelligent Key system transmits weak
radio waves. Environmental conditions may

interfere with the operation of the Intelligent
Key system under the following operating
conditions:
• When operating near a location where

strong radio waves are transmitted, such as
a TV tower, power station and broadcast-
ing station.

• When in possession of wireless equipment,

such as a cellular telephone, transceiver or
a CB radio.

• When the Intelligent Key is in contact with

or covered by metallic materials.

• When any type of radio wave remote con-

trol is used nearby.

• When the Intelligent Key is placed near an

electric appliance such as a personal
computer.

• When the vehicle is parked near a parking

meter.

In such cases, correct the operating condi-
tions before using the Intelligent Key function
or use the mechanical key.

Although the life of the battery varies de-
pending on the operating conditions, the bat-
tery’s life is approximately two years. If the
battery is discharged, replace it with a new
one.

When the Intelligent Key battery is low, a
“Key Battery Low” indicator illuminates in the
vehicle information display. For additional in-
formation, see “Vehicle information display
warnings and indicators” (P. 2-24).

Since the Intelligent Key is continuously re-
ceiving radio waves, if the key is left near
equipment which transmits strong radio
waves, such as signals from a TV and per-
sonal computer, the battery life may become
shorter.

For additional information, see “Battery re-
placement” (P. 8-22).

CAUTION

Listed below are conditions or occurrences
which will damage the Intelligent Key:

Do not allow the Intelligent Key, which
contains electrical components, to come
into contact with water or salt water.
This could affect the system function.

Do not drop the Intelligent Key.

Do not strike the Intelligent Key sharply
against another object.

Do not change or modify the Intelligent
Key.

Pre-driving checks and adjustments

3-7

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Wetting may damage the Intelligent
Key. If the Intelligent Key gets wet, im-
mediately wipe until it is completely dry.

Do not place the Intelligent Key for an
extended period in an area where tem-
peratures exceed 140°F (60°C).

Do not attach the Intelligent Key with a
key holder that contains a magnet.

Do not place the Intelligent Key near
equipment that produces a magnetic
field, such as a TV, audio equipment and
personal computers.

If an Intelligent Key is lost or stolen, INFINITI
recommends erasing the ID code of that In-
telligent Key from the vehicle. This may pre-
vent the unauthorized use of the Intelligent
Key to operate the vehicle. For information
regarding the erasing procedure, it is recom-
mended that you visit an INFINITI retailer.

OPERATING RANGE

The Intelligent Key functions can only be used
when the Intelligent Key is within the speci-
fied operating range from the door handle
request switch or the one touch unlock sen-
sor

O

1

.

When the Intelligent Key battery is dis-
charged or strong radio waves are present
near the operating location, the Intelligent
Key operating range becomes narrower, and
the Intelligent Key may not function properly.

The operating range is within 31.5 in (80 cm)
from each request switch or one touch unlock
sensor

O

1

.

If the Intelligent Key is too close to the door
glass, handle or rear bumper, the request
switches or the one touch unlock sensor may
not function.

If any of the doors are recently closed and
locked, you must wait 2 seconds before you
can unlock the door with the one touch un-
lock sensor. Pulling the handle within 2 sec-
onds of locking the door will allow you time to
confirm that the door has been locked with-
out accidentally unlocking the door with the
one touch unlock sensor.

If you pull the door handle with your gloved
hand, the one touch unlock sensor operation
may not function.

When the Intelligent Key is within the operat-
ing range, it is possible for anyone, even
someone who does not carry the Intelligent
Key, to push the request switch or the one
touch unlock sensor to lock/unlock the door
within range.

LPD3220

3-8

Pre-driving checks and adjustments

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

DOOR LOCKS/UNLOCKS
PRECAUTION

• Do not push the door handle request switch

with the Intelligent Key held in your hand as
illustrated. The close distance to the door
handle will cause the Intelligent Key system
to have difficulty recognizing that the Intel-
ligent Key is outside the vehicle.

• Within 2 seconds after the doors are locked

using the door handle request switch, make
sure that the doors have been securely
locked by operating the door handles.

• To prevent the Intelligent Key from being

left inside the vehicle, make sure you carry
the key with you before locking the doors
and liftgate.

• The Intelligent Key system (opening/

closing doors with the door handle request
switch or the one touch unlock sensor) can
be set to remain inactive. For additional
information, refer to the separate INFINITI
InTouch® Owner’s Manual.

• The door cannot be unlocked using the one

touch unlock operation after locking the
door within 2 seconds. To unlock the door,
release the one touch unlock sensor once
and touch it again.

• If a large amount of water runs down on

the door handle (for example, when wash-
ing the vehicle or in heavy rain), the door
may unlock if the Intelligent Key is in range
of operation. To prevent the door from be-
ing unlocked, the Intelligent Key should be
more than 7 ft (2 m) away from the vehicle.

• Do not hold and pull the door handle

quickly. The door will be unlocked but will
not open. Release the door handle once
and pull it again to open the door.

• If you pull the door handle with a gloved

hand, the one touch unlock operation may
not function.

INFINITI INTELLIGENT KEY
OPERATION

You can lock or unlock the doors without
taking the Intelligent Key out of your pocket
or bag.

LPD2716

LPD2717

Pre-driving checks and adjustments

3-9

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

When you carry the Intelligent Key with you
and Selective Door Unlock is turned on using
“Comfort & Convenience” options in the “Set-
tings” menu of the lower touch-screen dis-
play, you can unlock the corresponding door
by touching the front one touch unlock sen-
sor

O

B

within the range of operation. After

touching the one touch unlock sensor, the
door handle request switch

O

A

can be pushed

to unlock all doors. You can unlock all doors
by touching the rear one touch unlock sensor
within the range of operation.

When Selective Door Unlock is turned off in
the “Comfort & Convenience” options of the
“Settings” menu of the lower touch-screen

display and when carrying the Intelligent Key,
you can unlock all doors by touching a one
touch unlock sensor

O

B

within the range of

operation.

You can lock all doors by pushing the door
handle request switch

O

A

once.

NOTE:

Selective Door Unlock can be changed using
“Comfort & Convenience” options in the
“Settings” menu of the lower touch-screen
display. For additional information, refer to
the separate INFINITI InTouch® Owner’s
Manual.

Locking all doors and fuel-filler door

1. Place the ignition switch in the OFF posi-

tion and make sure you carry the Intelli-
gent Key with you.

2. Close all doors.

3. Push the door handle request switch

O

A

while carrying the Intelligent Key with you.

4. All the doors, liftgate and fuel-filler door

will lock.

5. The hazard indicator flashes twice and the

outside chime sounds twice.

LPD2734

LPD2733

LPD3081

3-10

Pre-driving checks and adjustments

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

NOTE:

• The one touch sensors and request

switches for all doors and liftgate can be
deactivated when the Lock/Unlock by
Door Handle setting is switched to OFF in
“Comfort & Convenience” options of the
“Settings” menu of the lower touch-
screen display. For additional information,
refer to the separate INFINITI InTouch®
Owner’s Manual.

• Doors will lock with the Intelligent Key

while the ignition switch is placed in the
ON position.

• Doors will not lock by pushing the door

handle request switch with the Intelligent
Key inside the vehicle. However, when an
Intelligent Key is inside the vehicle, doors
can be locked with another registered In-
telligent Key.

WARNING

After locking the doors using the request
switch, make sure that the doors have been
securely locked by operating the door
handles within two seconds of locking.
Failure to follow these instructions may re-
sult in inadvertently unlocking the doors,
which may decrease the safety and secu-
rity of your vehicle.

CAUTION

When locking the doors using the re-
quest switch, make sure to have the In-
telligent Key in your possession before
operating the request switch to prevent
the Intelligent Key from being left in the
vehicle.

The request switch is operational only
when the Intelligent Key has been de-
tected by the Intelligent Key system.

Lockout protection

To prevent the Intelligent Key from being
accidentally locked in the vehicle, lockout
protection is equipped with the Intelligent
Key system.

When the driver’s side door is open, the doors
are locked, then the Intelligent Key is left
inside the vehicle and the door is closed, all
doors will unlock automatically.

NOTE:

The doors may not lock when the Intelligent
Key is in the same hand that is operating the
request switch to lock the door. Put the In-
telligent Key in a purse, pocket or your other
hand.

CAUTION

The lockout protection may not function
under the following conditions:

When the Intelligent Key is placed on top
of the instrument panel.

When the Intelligent Key is placed inside
the glove box or a storage bin.

When the Intelligent Key is placed inside
the door pockets.

When the Intelligent Key is placed inside
or near metallic materials.

LPD2734

Pre-driving checks and adjustments

3-11

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Unlocking doors and fuel-filler door

1. Touch the one touch unlock sensor

O

B

while carrying the Intelligent Key with you.

2. The door handle welcome lights illumi-

nate, the hazard indicator lights flash once
and the vehicle beeps once.

If Selective Door Unlock is turned on in
“Settings” of the lower touch-screen dis-
play and operates on front door, the cor-
responding door will unlock. If it operates
on rear door, all doors will unlock. If Selec-
tive Door Unlock is turned off, all doors
will unlock.

3. If Selective Door Unlock is turned on in

“Settings” of the lower touch-screen dis-
play and operates on front door, push the
door handle request switch

O

A

within 1

minute.

4. The hazard indicator flashes once and the

vehicle beeps once again. All doors, lift-
gate and fuel-filler door will unlock.

NOTE:

The unlocking operation can be changed in
Selective Door Unlock in the “Comfort &
Convenience” options of the “Settings”
menu of the lower touch-screen display. For
additional information, refer to the separate
INFINITI InTouch® Owner’s Manual.

All doors and the fuel-filler door will lock
automatically unless one of the following op-
erations is performed within 1 minute after
pushing the request switch or one touch un-
lock operation while the doors are locked.
• Opening any door.
• Pushing the ignition switch.

During this 1–minute time period, if the
button on the Intelligent Key is pushed, all
doors will be locked automatically after an-
other 1 minute has passed.

NOTE:

The one touch unlock sensor can be deacti-
vated when the Touch Sensitive Door Sensor
setting is switched to OFF in the “Comfort &
Convenience” options of the “Settings”
menu of the lower touch-screen display. For
additional information, refer to the separate
INFINITI InTouch® Owner’s Manual.

LPD2733

LPD2734

3-12

Pre-driving checks and adjustments

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

If a door handle is pulled too quickly while
unlocking the doors using the one touch un-
lock sensor, you may be unable to open the
door. Returning the door handle to its original
position will allow you to open the door.

Using the interior lights

The interior lights illuminate for a period of
time when a door is unlocked.

The lights can be turned off without waiting by
performing one of the following operations:
• Placing the ignition switch in the ON

position.

• Locking the doors with the Intelligent Key.
• Switching the interior light switch to the

OFF position.

For additional information, see “Interior
lights” (P. 2-78).

Door handle welcome lights

When you unlock the doors using the Intelli-
gent Key, request switch or one touch unlock
sensor, the door handle welcome lights

O

A

will illuminate for a period of time. The wel-
come lights will also illuminate when you
open an unlocked door without carrying the
Intelligent Key with you. When you lock the
doors using the Intelligent Key or request
switch, the door handle welcome lights fade
out.

NOTE:

The door handle welcome lights and one
touch unlock sensor can be deactivated in
the ”Comfort & Convenience” options of the
“Settings” menu in the lower touch-screen
display. For additional information, refer to
the separate INFINITI InTouch® Owner’s
Manual.

HOW TO USE THE REMOTE
KEYLESS ENTRY FUNCTION

The remote keyless entry function can oper-
ate all door locks using the remote keyless
function of the Intelligent Key. The remote
keyless function can operate at a distance of
10 m (33 ft) away from the vehicle. The op-
erating distance depends upon the conditions
around the vehicle.
The remote keyless entry function will not
function under the following conditions:
• When the Intelligent Key is not within the

operational range.

• When the Intelligent Key battery is dis-

charged.

CAUTION

When locking the doors using the Intelli-
gent Key, be sure not to leave the key in the
vehicle.

LPD2732

Front and rear doors

Pre-driving checks and adjustments

3-13

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1.

(remote engine start) button

2.

(lock) button

3.

(unlock) button

4.

(liftgate) button

5.

(panic) button

Locking doors and fuel-filler door

1. Place the ignition switch in the LOCK

position.

2. Close all doors.

3. Press the

button on the Intelligent

Key.

4. The hazard indicator lights flash twice and

the horn beeps once.

5. All doors, liftgate and fuel-filler door will

be locked.

WARNING

After locking the doors using the Intelli-
gent Key, be sure that the doors have been
securely locked by operating the door
handles within two seconds of locking.
Failure to follow these instructions may re-
sult in inadvertently unlocking the doors,
which may decrease the safety and secu-
rity of your vehicle.

Unlocking doors and fuel-filler door

1. Press the

button on the Intelligent

Key.

2. The hazard indicator lights flash once and

the driver’s and fuel-filler doors unlock.

3. Press the

button again within 1 min-

ute to unlock all doors and liftgate.

All doors, liftgate and fuel-filler door will be
locked automatically unless one of the fol-
lowing operations is performed within 1 min-
ute after pressing the

button:

• Opening any doors.
• Pushing the ignition switch.

Using the interior lights

The interior lights illuminate for a period of
time when a door is unlocked.

The lights can be turned off without waiting by
performing one of the following operations:
• Placing the ignition switch in the ON

position.

• Locking the doors with the Intelligent Key.
• Switching the interior light switch to the

OFF position.

For additional information, see “Interior
lights” (P. 2-78).

Opening windows

The Intelligent Key allows you to simultane-
ously open windows equipped with auto-
matic operation.
To open the windows, press and hold the

button on the Intelligent Key for

longer

than 3 seconds

after all doors are unlocked.

LPD3702

3-14

Pre-driving checks and adjustments

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The door windows will open while pressing
the

button on the Intelligent Key.

The door windows cannot be closed by using
the Intelligent Key.

Releasing the rear liftgate

The rear liftgate can be opened and closed by
performing the following:
• Press the

button for longer than 1

second to open the rear liftgate.

• Press the

button again for longer than

1 second to close the rear liftgate.

When the

button is pressed during the

open or close process, the liftgate motors will
stop. When the

button is pressed again

for longer than 1 second the liftgate will re-
verse direction.

Using the panic alarm

If you are near your vehicle and feel threat-
ened, you may activate the panic alarm to call
attention by pressing and holding the
button on the Intelligent Key for

longer than

0.5 seconds.

The panic alarm and headlights will stay on
for a period of time.

The panic alarm stops when:
• It has run for a period of time.
• Any button is pressed on the Intelligent Key.
• The request switch on the driver or passen-

ger door is pushed and the Intelligent Key is
in range of the door handle.

Answer back horn feature

If desired, the answer back horn feature can
be deactivated using the Intelligent Key.
When it is deactivated and the

button

is pressed, the hazard indicator lights flash
twice. When the

button is pressed, nei-

ther the hazard indicator lights nor the horn
operates.

NOTE:

If you change the answer back horn and light
flash feature with the Intelligent Key, the
lower touch-screen display will show the
current mode after the ignition switch has
been cycled from the OFF to the ON posi-
tion. The ”Comfort & Convenience” options
of the “Settings” menu in the lower touch-
screen display can also be used to change the
answer back horn mode between “Conve-
nience” and “Security” settings.

To deactivate:

Press and hold the

and

buttons

for at least 2 seconds.

The hazard indicator lights will flash three
times to confirm that the answer back horn
feature has been deactivated.

To activate:

Press and hold the

and

buttons

for at least 2 seconds once

more.

The hazard indicator lights will flash once and
the horn will sound once to confirm that the
horn beep feature has been reactivated.

Deactivating the horn beep feature does not
silence the horn if the alarm is triggered.

WARNING SIGNALS

To help prevent the vehicle from moving un-
expectedly by erroneous operation of the In-
telligent Key or to help prevent the vehicle
from being stolen, a chime or buzzer sounds
from inside and outside the vehicle and a
warning is displayed in the instrument panel.

When a chime or beep sounds or a warning is
displayed, be sure to check the vehicle and
the Intelligent Key.

For additional information, see “Trouble-
shooting guide” (P. 3-16) and the separate
INFINITI InTouch® Owner’s Manual.

Pre-driving checks and adjustments

3-15

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

TROUBLESHOOTING GUIDE

Verify the location of all Intelligent Keys that
are programmed for the vehicle. If another
Intelligent Key is in range or inside the vehicle,
the vehicle system may respond differently
than expected.

Symptom

Possible Cause

Remedy

When engaging the P (Park) position

The Push Ignition to OFF warning
appears in the display.

The ignition switch is in the ON position.

Place the ignition switch in the OFF
position.

When opening the driver’s door to get
out of the vehicle

The Door Open warning appears on the
display.

The ignition switch is in the ON position.

Place the ignition switch in the OFF
position.

When closing the door after getting out
of the vehicle

The No Key Detected warning appears
on the display, the outside chime sounds
three times.

The ignition switch is in the ON position.

Place the ignition switch in the OFF
position.

The Rear Door Alert warning message
appears on the display, the horn sounds
three times twice, or a Check Rear Seat
for All Articles warning appears on the
display.

The Rear Door Alert is activated.

Check the back seat for all articles, press
the OK button to clear the Rear Door
Alert warning message.

When closing the door with the inside
lock knob turned to LOCK

The outside chime sounds for approxi-
mately 3 seconds and all the doors un-
lock.

The Intelligent Key is inside the vehicle.

Carry the Intelligent Key with you.

3-16

Pre-driving checks and adjustments

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Symptom

Possible Cause

Remedy

When pushing the door handle or lift-
gate request switch or the

button

on the Intelligent Key to lock the door

The outside chime sounds for approxi-
mately 2 seconds.

The Intelligent Key is inside the vehicle.

Carry the Intelligent Key with you.

When pushing the ignition switch to
start the engine

The Key Battery Low warning appears
on the display.

The battery charge may be getting low.

Replace the battery with a new one.
For additional information, see “Battery
replacement” (P. 8-22).

The No Key Detected warning appears
on the display, the outside chime sounds
three times and the inside warning chime
sounds for approximately 3 seconds.

The battery charge may be getting low.

Replace the battery with a new one.
For additional information, see “Battery
replacement” (P. 8-22).

When pushing the ignition switch

The Key System Error: See Owner’s
Manual warning appears on the display.

It warns of a malfunction with the Intelli-
gent Key system.

It is recommended that you visit an
INFINITI retailer.

Pre-driving checks and adjustments

3-17

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

LOG-IN FUNCTION

After setting up the user information, the
system will automatically recognize the user
upon turning on the vehicle.

There will be a personalized welcome greet-
ing and screen prompt to log in.

This feature allows four drivers to use their
own registration, drive mode, driving posi-
tion, air conditioner, and auto settings and
memorizes these custom settings.

The log-in user can be changed on the wel-
come greeting screen or the User List screen.
For additional information, refer to the sepa-
rate INFINITI InTouch® Owner’s Manual.

The log-in function is linked to the following
features:
• Meter
• Audio
• Navigation system display
• Navigation settings
• Air conditioner
• Memory seat (if so equipped)
• Engine/Transmission
• Steering
• Active Trace Control

• Driver assistance except for the Forward

Emergency Braking (FEB) with Pedestrian
Detection system (if so equipped)

• Active Engine Brake
• Head Up Display (HUD) (if so equipped)
• Vehicle Settings

The

button will be on the INFINITI

Intelligent Key if the vehicle has Remote
Engine Start. This feature allows the engine
to start from outside the vehicle.

The following features may be affected when
the Remote Engine Start feature is used:
• Vehicles with an automatic climate control

system may default to either a heating or
cooling mode depending on outside and
cabin temperatures. For additional infor-
mation, see “Remote Engine Start with In-
telligent Climate Control” in the (P. 4-36).

LPD2995

REMOTE ENGINE START

3-18

Pre-driving checks and adjustments

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Laws in some local communities may restrict
or prohibit the use of Remote Engine Start, or
the amount of time a parked vehicle engine
may idle. For example, some laws require a
person using Remote Engine Start to have
the vehicle in view or may restrict idling time
except in freezing temperatures. Check local
regulations for any requirements.

Other conditions may affect the function of
the Remote Engine Start feature. For addi-
tional information, see “Conditions the Re-
mote Engine Start will not work” (P. 3-20).

Other conditions can affect the performance
of the Intelligent Key transmitter. For addi-
tional information, see “INFINITI Intelligent
Key” (P. 3-2).

REMOTE ENGINE START
OPERATING RANGE

WARNING

To help avoid risk of injury or death
through unintended operation of the ve-
hicle and/or its systems, including en-
trapment in windows or inadvertent
door lock activation, do not leave chil-
dren, people who require the assistance
of others or pets unattended in your

vehicle. Additionally, the temperature
inside a closed vehicle on a warm day can
quickly become high enough to cause a
significant risk of injury or death to
people and pets.

Do not use Remote Engine Start in closed
spaces such as a garage. Do not breathe
exhaust gases; they contain colorless
and odorless carbon monoxide. Carbon
monoxide is dangerous. It can cause un-
consciousness or death.

CAUTION

When the Intelligent Key battery is dis-
charged or other strong radio wave
sources are present near the operating lo-
cation, the Intelligent Key operating range
becomes narrower, and the Intelligent Key
may not function properly.

The Remote Engine Start function can only
be used when the Intelligent Key is within the
specified operating range from the vehicle.

The Remote Engine Start operating range is
approximately 197 ft (60 m) from the vehicle.

REMOTE STARTING THE
VEHICLE

To use the Remote Engine Start feature per-
form the following:

1. Aim the Intelligent Key at the vehicle.

2. Press the

button to lock all doors.

3. Within 5 seconds press and hold the

button until the turn signal lights flash and
the tail lamps turn on. If the vehicle is not
within view press and hold the

but-

ton for at least 2 seconds.

The following events will occur when the en-
gine starts:
• The parking lights will turn on and remain

on as long as the engine is running.

• The doors will be locked and the climate

control system may come on.

• The engine will continue to run for 10 min-

utes. Repeat the steps to extend the time
for an additional 10 minutes. For additional
information, see “Extending engine run
time” (P. 3-20).

Press and hold the brake pedal while switch-
ing the ignition to the ON position before
driving. For additional information, see “Driv-
ing the vehicle” (P. 5-18).

Pre-driving checks and adjustments

3-19

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

EXTENDING ENGINE RUN TIME

The Remote Engine Start feature can be ex-
tended one time by performing the steps listed
in “Remote starting the vehicle” (P. 3-19). Run
time will be calculated as follows:
• The first 10 minute run time will start

when the Remote Engine Start function is
performed.

• The second 10 minutes will start immedi-

ately when the Remote Engine Start func-
tion is performed again. For example, if the
engine has been running for 5 minutes, and
10 minutes are added, the engine will run
for a total of 15 minutes.

• Extending engine run time will bring you to

the two Remote Engine Start limit.

A maximum of two Remote Engine Starts, or
a single start with an extension, are allowed
between ignition cycles.

The ignition switch must be cycled to the ON
position and then back to the OFF position
before the Remote Engine Start procedure
can be used again.

CANCELING A REMOTE ENGINE
START

To cancel a Remote Engine Start, perform
one of the following:
• Aim the Intelligent Key at the vehicle and

press

until the parking lights turn off.

• Turn on the hazard warning flashers.
• Cycle the ignition switch on and then off.
• The extended engine run time has expired.
• The first 10 minute timer has expired.
• Opening the engine hood.
• Shifting the vehicle out of P (Park).
• The alarm sounds due to illegal entry into

the vehicle.

• Pushing the ignition switch without the In-

telligent Key in the vehicle.

• Not pressing the brake pedal while pressing

the ignition switch with the Intelligent Key
in the vehicle.

CONDITIONS THE REMOTE
ENGINE START WILL NOT WORK

The Remote Engine Start will not operate if
any of the following conditions are present:
• The ignition switch is placed in the ON

position.

• The hood is not securely closed.
• The hazard indicator lights are on.
• The engine is still running. The engine must

be completely stopped. Wait at least 6 sec-
onds if the engine goes from running to off.
This is not applicable when extending en-
gine run time.

• The

button is not pressed and held for

at least 2 seconds.

• The

button is not pressed and held

within 5 seconds of pressing the lock
button.

• The brake is pressed.
• The doors are not closed and locked.
• The liftgate is open.
• The I–Key System Error warning message

appears in the vehicle information display.

• The alarm sounds due to illegal entry into

the vehicle.

3-20

Pre-driving checks and adjustments

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

• Two Remote Engine Starts, or a single Re-

mote Engine Start with an extension, have
already been used.

• The vehicle is not in P (Park).
• There is a detected registered key already

inside of the vehicle.

• The Remote Engine Start function has

been switched to the OFF position in
Vehicle Settings of the vehicle information
display. For additional information, see
“Vehicle information display” (P. 2-19).

The Remote Engine Start may display a
warning or indicator in the vehicle informa-
tion display. For additional information, see
“Vehicle information display” (P. 2-19).

1. Pull the hood lock release handle

O

1

lo-

cated below the driver side instrument
panel. The hood will spring up slightly.

2. Push the lever

O

2

at the front of the hood

to the side with your fingertips and raise
the hood.

When closing the hood, lower it slowly and
make sure it locks into place.

WARNING

Make sure the hood is completely closed
and latched before driving. Failure to do
so could cause the hood to fly open and
result in an accident.

If you see steam or smoke coming from
the engine compartment, to avoid injury
do not open the hood.

Do not pull the hood lock release handle
or push the hood down after the pop-up
engine hood system activates. Doing so
could cause personal injury or damage to
the hood because the hood cannot be
closed manually after the system is acti-
vated. When the pop-up engine hood ac-
tivates, it is recommended you contact
an INFINITI retailer.

LPD2754

HOOD

Pre-driving checks and adjustments

3-21

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

WARNING

Always be sure the liftgate has been
closed securely to prevent it from open-
ing while driving.

Do not drive with the liftgate open. This
could allow dangerous exhaust gases to
be drawn into the vehicle. For additional
information, see “Exhaust gas (carbon
monoxide)” (P. 5-4).

To help avoid risk of injury or death
through unintended operation of the ve-
hicle and/or its systems, including en-
trapment in windows or inadvertent
door lock activation, do not leave chil-
dren, people who require the assistance
of others or pets unattended in your ve-
hicle. Additionally, the temperature in-
side a closed vehicle on a warm day can
quickly become high enough to cause a
significant risk of injury or death to
people and pets.

Always be sure that hands and feet are
clear of the door frame to avoid injury
while closing the liftgate.

OPERATING THE POWER
LIFTGATE

WARNING

Make sure that all passengers have their
hands, etc., inside the vehicle before
closing the liftgate.

To help avoid risk of injury or death
through unintended operation of the ve-
hicle and/or its systems, including en-
trapment in windows or inadvertent
door lock activation, do not leave chil-
dren, people who require the assistance
of others or pets unattended in your ve-
hicle. Additionally, the temperature in-
side a closed vehicle on a warm day can
quickly become high enough to cause a
significant risk of injury or death to
people or pets.

LPD3058

Instrument panel switch

LIFTGATE

3-22

Pre-driving checks and adjustments

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

NOTE:

To open, close or reverse the power liftgate,
engage the P (Park) position. Also, the
power liftgate will not operate if the battery
voltage is low.

Power Open:

The power liftgate automatically moves from
the fully closed position to the fully open
position in approximately 5 to 8 seconds. The
power open feature can be activated by the
switch on the Intelligent Key, the instrument
panel switch or the liftgate opener switch

O

A

.

A chime sounds to indicate the power open
sequence has been started.

• When the vehicle is locked, the liftgate can

be opened by the instrument panel switch,
Intelligent Key and liftgate opener switch

O

A

(with the Intelligent Key in liftgate op-

eration range). The liftgate will individually
unlock and open. Once the liftgate is
closed, the vehicle will remain unlocked. To
lock the liftgate, push the liftgate request
switch

O

B

(with the Intelligent Key in lift-

gate operation range) or press the
button on the Intelligent Key.

• To open the liftgate with the Intelligent

Key, hold the button for 1 second.

• To open the liftgate with the instrument

panel switch, hold the button for 1 second.

• To open the liftgate with the liftgate

opener switch

O

A

, the liftgate must be un-

locked if the Intelligent Key is not in liftgate
operation range.

Power Close:

The power liftgate automatically moves from
the fully open position to the secondary po-
sition. When the liftgate reaches the second-
ary position, the cinching motor engages and
pulls the liftgate to its primary latch position.
Power close takes approximately 7 to 10
seconds. The power close feature can be ac-
tivated by the switch on the Intelligent Key,
the instrument panel, the liftgate close switch

O

C

and the liftgate lock switch

O

D

. A chime

sounds to indicate the power close sequence
has been started.

LPD2755

Liftgate opener switch and request switch

LPD3353

Liftgate close switch

Pre-driving checks and adjustments

3-23

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

• If the liftgate opener switch

O

A

is activated

while the cinching motor is engaged, the
cinching motor will disengage and release
the latch and the liftgate will open.

• The Intelligent Key button must be held for

1 second before the liftgate closes.

• The liftgate close switch

O

C

can only be

used to close the liftgate if the power lift-
gate main switch is in the ON position.

• If the liftgate lock switch

O

D

is activated the

liftgate will begin to close and all doors will
lock.

Stop - Reverse:

During the open/close movement, the lift-
gate can be stopped if the Intelligent Key,
instrument panel or liftgate opener switch

O

A

, liftgate close switch

O

C

or liftgate lock

switch

O

D

is pushed. The liftgate can be re-

versed if the Intelligent Key, instrument panel
or liftgate opener switch

O

A

, liftgate request

switch

O

B

or liftgate lock switch

O

D

is pushed

again.

Auto Reverse:

If an obstacle is detected during power open
or power close, a warning chime will sound
and the liftgate will reverse direction and re-
turn to the full open or full close position.

If a second obstacle is detected, the liftgate
motion will stop and the liftgate will enter
manual mode.

A pinch strip is mounted on each side of the
liftgate. If an obstacle is detected by a pinch
strip during power close, the liftgate will re-
verse direction and return to the full open
position.

NOTE:

If the pinch strip is damaged or removed, the
power close function will not operate.

WARNING

There are some small distances immedi-
ately before the closed position which can-
not be detected. Make sure that all passen-
gers have their hands, etc., inside the
vehicle before closing the liftgate.

Manual Mode:

If power operation is not available, the lift-
gate may be operated manually. Power op-
eration may not be available if multiple ob-
stacles have been detected in a single power
cycle or if the battery voltage is low.
If the power liftgate opener switch

O

A

is

pushed during power open or close, the
power operation will be canceled and the
liftgate can be operated manually.

To open the liftgate manually, unlock the
doors, push the liftgate opener switch

O

A

and

lift the liftgate.

To close, lower and push the liftgate down
securely.

LPD2721

3-24

Pre-driving checks and adjustments

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     4      5      6      7     ..