Nissan NV200 Taxi (2017 year). Manual - part 8

Never leave the keys in the vehicle.

Additional or replacement keys:

If you still have a key, the key number is not
necessary when you need extra NISSAN Vehicle
Immobilizer System keys. Your existing key can
be duplicated without knowing the key number.
As many as four NISSAN Vehicle Immobilizer
System keys can be used with one vehicle. You
should bring all NISSAN Vehicle Immobilizer Sys-
tem keys that you have to a NISSAN dealer for
registration. This is because the registration pro-
cess will erase the memory of all key codes
previously registered into the NISSAN Vehicle
Immobilizer System. After the registration pro-
cess, these components will only recognize keys
coded into the NISSAN Vehicle Immobilizer Sys-
tem during registration. Any key that is not given
to the dealer at the time of registration will no
longer be able to start your vehicle.

CAUTION

Do not allow the immobilizer system key,
which contains an electrical transponder,
to come into contact with water or salt
water. This could affect system function.

When the doors are locked using one of the
following methods, the doors cannot be opened
using the inside or outside door handles. The
doors must be unlocked to open the doors.

WARNING

● Always have the doors locked while

driving. Along with the use of seat belts,
this provides greater safety in the event
of an accident by helping to prevent
persons from being thrown from the
vehicle. This also helps keep children
and others from unintentionally open-
ing the doors, and will help keep out
intruders.

● Before opening any door, always look

for and avoid oncoming traffic.

● To help avoid risk of injury or death

through unintended operation of the
vehicle and or its systems, including
entrapment in windows or inadvertent
door lock activation, do not leave chil-
dren, people who require the assistance
of others or pets unattended in your
vehicle. Additionally, the temperature
inside a closed vehicle on a warm day
can quickly become hot enough to
cause a significant risk of injury or
death to people and pets.

LOCKING WITH KEY

To lock or unlock the vehicle, turn the key as
shown.

Manual (if so equipped)

To lock a door, turn the key toward the front of the
vehicle

䊊

. To unlock, turn the key toward the rear

䊊

Driver’s side and passenger side

LPD2131

DOORS

Pre-driving checks and adjustments

3-3

To lock a door, turn the key toward the front of the
vehicle

䊊

. To unlock, turn the key toward the rear

䊊

To lock a door, turn the key toward the right

䊊

the vehicle. To unlock, turn the key toward the left

䊊

of the vehicle.

Power (if so equipped)

The power door lock system allows you to lock or
unlock all doors at the same time.

Turning the key toward the front

䊊

of the vehicle

locks all the doors.

Turning the key one time toward the rear

䊊

of the

vehicle unlocks that door. From that position,
returning the key to neutral

䊊

(where the key can

only be removed and inserted) and turning it
toward the rear again within five seconds unlocks
all doors

䊊

Sliding doors

LPD2132

Back door

LPD2133

Driver’s side and passenger side

(if so equipped)

LPD2134

3-4

Pre-driving checks and adjustments

LOCKING WITH INSIDE LOCK
KNOB

To lock the door without the key, move the inside
lock knob to the lock position

䊊

, then close the

door.

To unlock the door without the key, move the
inside lock knob to the unlock position

䊊

To lock the door without the key, move the inside
lock knob to the lock position

䊊

, then close the

door.

To unlock the door without the key, move the
inside lock knob to the unlock position

䊊

To lock the door without the key, move the inside
lock knob to the lock position

䊊

, then close the

door.

To unlock the door without the key, move the
inside lock knob to the unlock position

䊊

To open the door from the inside, pull the inside
door handle toward you.

Inside lock – front driver and passenger

LPD2092

Inside lock – sliding doors

LPD2135

Inside lock – back door

LPD2001

Pre-driving checks and adjustments

3-5

LOCKING WITH POWER DOOR
LOCK SWITCH

To lock all the doors without a key, push the door
lock switch (driver’s or front passenger’s side) to
the lock position

䊊

. When locking the door this

way, be certain not to leave the key inside the
vehicle.

To unlock all the doors without a key, push the
door lock switch (driver’s or front passenger’s
side) to the unlock position

䊊

Lockout protection

When the power door lock switch (driver’s or
front passenger’s side) is moved to the lock
position with the key in the ignition switch and any
door opens, all doors will lock and then unlock
automatically. This helps to prevent the keys from
being accidently locked inside the vehicle.

OPERATING THE SLIDING DOORS

WARNING

● Always use the door handle to open or

close the sliding door. Do not attempt to
open or close the door by merely plac-
ing your hand on the door edge or door
slide roller as this may cause injury.

● When opening the door on a slope, en-

sure that it is fully open and can be held
in place by the detent. Failing to ensure
the door remains open could result in
serious injury.

WPD0381

LPD2136

3-6

Pre-driving checks and adjustments

The sliding door can be opened from the inside or
the outside.

To open the sliding door from the inside, pull the
handle

䊊

toward the rear of the vehicle and slide

the door until the door clicks into the detent.

To close the sliding door from the inside pull the
handle

䊊

toward the front of the vehicle. The

door will release from the open position and slide
closed.

To open a sliding door from the outside, pull the
outside handle and slide the door toward the rear
of the vehicle until the door clicks into the detent.

To close the sliding door from the outside, pull the
outside handle again. The door will release from
the open position and slide closed.

BACK DOORS

CAUTION

● Do not operate the 180° release lever

until the door has been fully opened.
Doing so can result in damage to the
vehicle

and/or

malfunction

the

mechanism.

● Always look before fully opening the

back door(s), to avoid an accident with
oncoming traffic or pedestrians.

LPD2137

LPD2138

Pre-driving checks and adjustments

3-7

● When closing the back doors, be sure to

close the left-side door before closing
the right-side door.

Open the back doors by performing the follow-
ing:

1. From the outside of the vehicle, pull the door

handle

䊊

on the right side door and open

door until it stops.

2. Pull the lever

䊊

, located on the side of the

left back door, toward the rear of the vehicle
and pull the door to open until the door
stops.

The back doors open approximately 180° to allow
access to the rear of the vehicle.

3. To open either door to the wide open posi-

tion

䊊

pull the release latch

䊊

, located on

the inside of each back door, toward the
front of the vehicle to release the check link
arm.

4. Open the door slowly until the door stops.

The back doors are not designed to be
latched in their fully open positions.

Park the vehicle in a safe and level place.
Make sure that the area is clear of ob-
stacles and there is enough clearance
around the back doors.

LPD2139

LPD2140

3-8

Pre-driving checks and adjustments

AUTOMATIC DOOR LOCKS

● All doors lock automatically when the vehicle

speed reaches 15 mph (24 km/h).

● All doors unlock automatically when the ig-

nition switch is placed in the OFF position or
when the key is removed from the ignition
switch.

CHILD SAFETY SLIDING DOOR
LOCK

The child safety lock helps prevent the sliding
door from being opened accidentally, especially
when small children are in the vehicle.

The child safety lock lever is located on the edge
of the sliding door.

When the lever is in the unlock position, the door
can be opened from the outside or the inside.

When the lever is in the LOCK position, the
door can be opened only from the outside.

WARNING

● Radio waves could adversely affect

electric medical equipment. Those who
use a pacemaker should contact the
electric medical equipment manufac-
turer for the possible influences before
use.

● The remote keyless entry key fob trans-

mits radio waves when the buttons are
pressed. The FAA advises radio waves
may affect aircraft navigation and com-
munication systems. Do not operate the
remote keyless entry key fob while on
an airplane. Make sure the buttons are
not operated unintentionally when the
unit is stored for a flight.

It is possible to lock/unlock all doors, turn the
interior lights on, and activate the panic alarm by
using the key fob from outside the vehicle.

Be sure to remove the key from the vehicle
before locking the doors.

The key fob can operate at a distance of approxi-
mately 33 ft (10 m) from the vehicle. The effective
distance depends on the conditions around the
vehicle.

LPD2050

REMOTE KEYLESS ENTRY SYSTEM
(if so equipped)

Pre-driving checks and adjustments

3-9

As many as four key fobs can be used with one
vehicle. For information concerning the purchase
and use of additional key fobs, it is recommended
that you visit a NISSAN dealer.

The key fob will not function when:

● The battery is discharged.
● The distance between the vehicle and the

key fob is over 33 ft (10 m).

The panic alarm will not activate when the
key is in the ignition switch.

CAUTION

Listed below are conditions or occur-
rences which will damage the key fob:

● Do not allow the key fob, which con-

tains electrical components, to come
into contact with water or salt water.
This could affect the system function.

● Do not drop the key fob.
● Do not strike the key fob sharply

against another object.

● Do not change or modify the key fob.
● Wetting may damage the key fob. If the

key fob gets wet, immediately wipe until
it is completely dry.

● Do not place the key fob for an ex-

tended period in an area where tem-
peratures exceed 140°F (60°C).

● Do not attach the key fob with a key

holder that contains a magnet.

● Do not place the key fob near equip-

ment that produces a magnetic field,
such as a TV, audio equipment and per-
sonal computers.

If a key fob is lost or stolen, NISSAN rec-
ommends erasing the ID code of that key
fob. This will prevent the key fob from
unauthorized use to unlock the vehicle.
For information regarding the erasing
procedure, it is recommended that you
visit a NISSAN dealer.

HOW TO USE REMOTE KEYLESS
ENTRY SYSTEM

Locking doors

1. Close all windows.

2. Remove the key from the ignition switch.

3. Close all doors.

4. Press the

button on the key fob. All

the doors lock. The hazard warning lights
flash twice and the horn beeps once to
indicate all doors are locked.

LPD2039

3-10

Pre-driving checks and adjustments

● When the

button is pressed with

all doors locked, the hazard warning lights
flash twice and the horn beeps once as a
reminder that the doors are already
locked.

● If a door is open and you press

the

button, the doors will lock

but the horn will not beep and the hazard
lights will not flash.

The horn may or may not beep. For additional
information, refer to “Silencing the horn beep
feature” in this section.

Unlocking doors

Press the

button on the key fob once.

● Only the driver’s door unlocks.
● The hazard warning lights flash once if all

doors are completely closed with the ignition
switch in any position except the ON posi-
tion.

● The interior light turns on and the light timer

activates for 30 seconds when the interior
light switch is in the DOOR position with the
ignition switch in any position except the ON
position.

Press the

button on the key fob again

within five seconds.

● All doors unlock.
● The hazard warning lights flash once if all

doors are completely closed.

The interior lights can be turned off without wait-
ing a period of time by inserting the key into the
ignition switch and placing the ignition switch in
the ON or START position, locking the doors with
the key fob, power door lock switch or pushing
the interior light switch to the off position.

Auto relock

When the

button on the key fob is

pressed, all doors will lock automatically within
one minute unless one of the following opera-
tions is performed:

● Any door is opened.
● A key is inserted into the ignition switch and

the switch is cycled from OFF to ON.

● Press key fob

button.

LPD2040

Pre-driving checks and adjustments

3-11

Using the panic alarm

If you are near your vehicle and feel threatened,
you may activate the panic alarm to call attention
by pressing and holding the

button on the

key fob for longer than 0.5 seconds.
The panic alarm and headlights will stay on for a
period of time.

The panic alarm stops when:

● It has run for a period of time.
● Any button is pressed on the key fob.

Using the interior light

Press the

button on the key fob once to

turn on the interior lights.

Silencing the horn beep feature

If desired, the horn beep feature can be deacti-
vated using the key fob.

To deactivate: Press and hold the
and

buttons for at least 2 seconds.

The hazard warning lights will flash three times to
confirm that the horn beep feature has been
deactivated.

To activate: Press and hold the
and

buttons for at least 2 seconds once

more.

LPD2041

LPD2044

3-12

Pre-driving checks and adjustments

The hazard warning lights will flash once and the
horn will sound once to confirm that the horn
beep feature has been reactivated.
Deactivating the horn beep feature does not si-
lence the horn if the alarm is triggered.

1. Pull the hood lock release handle

䊊

located

below the instrument panel until the hood
springs up slightly.

2. Locate the lever

䊊

in between the hood and

grille and push the lever sideways with your
fingertips.

3. Raise the hood

䊊

4. Remove the support rod

䊊

and insert it into

the slot

䊊

Hold the coated parts

䊊

when removing or

resetting the support rod. Avoid direct con-
tact with the metal parts, as they may be
hot immediately after the engine has been
stopped.

When closing the hood, return the support rod to
its original position, lower the hood to approxi-
mately 12 in (30 cm) above the latch and release
it. This allows proper engagement of the hood
latch.

LPD2142

HOOD

Pre-driving checks and adjustments

3-13

WARNING

● Make sure the hood is completely

closed and latched before driving. Fail-
ure to do so could cause the hood to fly
open and result in an accident.

● If you see steam or smoke coming from

the engine compartment, to avoid injury
do not open the hood.

OPENER OPERATION

The fuel-filler door release is located below the
instrument panel. To open the fuel-filler door, pull
the release. To lock, close the fuel-filler door
securely.

FUEL-FILLER CAP

WARNING

● Gasoline is extremely flammable and

highly explosive under certain condi-
tions. You could be burned or seriously
injured if it is misused or mishandled.
Always stop the engine and do not
smoke or allow open flames or sparks
near the vehicle when refueling.

● Do not attempt to top off the fuel tank

after the fuel pump nozzle shuts off
automatically. Continued refueling may
cause fuel overflow, resulting in fuel
spray and possibly a fire.

● Use only an original equipment type

fuel-filler cap as a replacement. It has a
built-in safety valve needed for proper
operation of the fuel system and emis-
sion control system. An incorrect cap
can result in a serious malfunction and
possible injury. It could also cause
the

Malfunction Indicator Light

(MIL) to come on.

● Never pour fuel into the throttle body to

attempt to start your vehicle.

LPD2022

FUEL-FILLER DOOR

3-14

Pre-driving checks and adjustments

● Do not fill a portable fuel container in

the vehicle or trailer. Static electricity
can cause an explosion of flammable
liquid, vapor or gas in any vehicle or
trailer. To reduce the risk of serious
injury or death when filling portable fuel
containers:

– Always place the container on the

ground when filling.

– Do not use electronic devices when

filling.

– Keep the pump nozzle in contact

with the container while you are fill-
ing it.

– Use only approved portable fuel con-

tainers for flammable liquid.

CAUTION

● Do not use E-15 or E-85 fuel in your

vehicle. For additional information, re-
fer to the “Fuel recommendationl” in
the “Technical and consumer informa-
tion” section of this manual.

● Failure to tighten the fuel-filler cap

properly may cause the

Malfunc-

tion Indicator Light (MIL) to illuminate.
If the

light illuminates because

the fuel-filler cap is loose or missing,
tighten or install the cap and continue
to drive the vehicle. The

light

should turn off after a few driving trips.
If the

light does not turn off after a

few driving trips, it is recommened you
visit a NISSAN dealer for this service.

● The LOOSE FUEL CAP warning mes-

sage will be displayed if the fuel-filler
cap is not properly tightened. It may
take a few driving trips for the message
to be displayed. Failure to tighten the
fuel-filler cap properly after the LOOSE
FUEL CAP warning message is dis-
played may cause the

Malfunc-

tion Indicator Light (MIL) to illuminate.

● For additional information, refer to the

“Malfunction Indicator Light (MIL)” in
the “Instruments and controls” section
of this manual.

● If fuel is spilled on the vehicle body,

flush it away with water to avoid paint
damage.

To remove the fuel-filler cap:

1. Turn the fuel-filler cap counterclockwise

䊊

to remove.

2. Loop the tether strap around the hook

䊊

while refueling.

To install the fuel-filler cap:

1. Insert the fuel-filler cap straight into the fuel-

filler tube.

2. Turn the fuel-filler cap clockwise

䊊

until a

single click is heard.

LPD2174

Pre-driving checks and adjustments

3-15

LOOSE FUEL CAP warning message

The LOOSE FUEL CAP warning message dis-
plays in the odometer when the fuel-filler cap is
not tightened correctly after the vehicle has been
refueled. It may take a few driving trips for the
message to be displayed. To turn off the warning
message, perform the following:

1. Remove and install the fuel-filler cap as pre-

viously described as soon as possible.

2. Tighten the fuel-filler cap until it clicks.

3. Press the loose fuel cap warning reset but-

ton

䊊

in the meter for about 1 second to

turn off the LOOSE FUEL CAP warning
message after tightening the fuel-filler cap.

TILT OPERATION

Push the lock lever

䊊

down and adjust the

steering wheel up or down

䊊

to the desired

position.

Pull the lock lever

䊊

up to lock the steering

wheel in place.

WARNING

Do not adjust the steering wheel while
driving. You could lose control of your
vehicle and cause an accident.

LPD2343

LPD0355

STEERING WHEEL

3-16

Pre-driving checks and adjustments

1. To block out glare from the front, swing

down the sun visor

䊊

2. To block glare from the side, disconnect the

sun visor from the center mount and swing it
to the side

䊊

CARD HOLDER

To access the card holder, pull the sun visor
down and slide card in the card holder

䊊

. Do not

view information while operating the vehicle.

MANUAL ANTI-GLARE REARVIEW
MIRROR

The night position

䊊

reduces glare from the

headlights of vehicles behind you at night.

Use the day position

䊊

when driving in daylight

hours.

WARNING

Use the night position only when neces-
sary, because it reduces rearview clarity.

SIC2872

LPD2033

WPD0126

SUN VISORS

MIRRORS

Pre-driving checks and adjustments

3-17

OUTSIDE MIRRORS

WARNING

● Do not adjust the mirrors while driving.

You could lose control of your vehicle
and cause an accident.

● Objects viewed in the outside mirror on

the passenger side are closer than they
appear. Be careful when moving to the
right. Using only this mirror could cause
an accident. Use the inside mirror or
glance over your shoulder to properly
judge distances to other objects.

Electric control type

The outside mirror remote control will operate
only when the ignition switch is in the ACC or ON
position.

Move the small switch

䊊

to select the right or left

mirror. Adjust each mirror to the desired position
using the large switch

䊊

Foldable outside mirrors

Pull the outside mirror toward the door to fold it.

Heated mirrors (if so equipped)

The outside mirrors can be heated to defrost,
defog, or de-ice for improved visibility. For addi-
tional information, refer to “Rear window and
outside mirror defroster switch” in the “Instru-
ments and controls” section of this manual.

LPD0237

LPD2145

3-18

Pre-driving checks and adjustments

Content .. 6 7 8 9 ..