|
|
|
Symptom: REAR WASH SWITCH INPUT STUCK When Monitored and Set Condition: REAR WASH SWITCH INPUT STUCK When Monitored: Ignition ON Set Condition: Switch is applied for more than 10 seconds. POSSIBLE CAUSES REAR WASHER SWITCH STUCK INTERMITTENT WIRING AND CONNECTORS TEST ACTION APPLICABILITY 1 Turn the ignition on. All Yes → Go To 2 No → Go To 3 2 Turn the ignition off. All Yes → Replace the Rear Washer Switch in accordance with the Service Information. No → Go To 3 3 Turn the ignition on. t, erase all BCM and FCM DTCs. Turn the ignition off. All Yes → Repair as necessary. Perform BODY VERIFICATION TEST - VER 1. No → Test Complete. 991 WINDSHIELD WIPER & WASHER |