TEST
ACTION
APPLICABILITY
4
Turn the ignition on.
Turn the front wipers to an intermittent setting.
Using a 12-volt test light connected to 12-volts, back probe the Front Wiper Park
Switch Sense circuit at the Front Wiper Module harness connector.
NOTE: The test light should illuminate when the wipers are parked, then
turn off when the wipers move off of the parked position.
Does the test light turn on and off properly?
All
Yes
→ Replace the Front Control Module.
Perform BODY VERIFICATION TEST - VER 1.
No
→ Replace the Front Wiper Module.
Perform BODY VERIFICATION TEST - VER 1.
983
WINDSHIELD WIPER & WASHER
FRONT WIPER PARK SWITCH SHORT TO GND —
Continued