|
|
|
Symptom: PASSENGER MIRROR RELAY OUTPUT SHORT (EXPORT ONLY) POSSIBLE CAUSES INTERMITTENT CONDITION PASSENGER FOLDING MIRROR RELAY PASSENGER FOLDING MIRROR RELAY CONTROL CIRCUIT SHORTED TO VOLTAGE BODY CONTROL MODULE TEST ACTION APPLICABILITY 1 With the DRBIII t, record and erase DTC’s. NOTE: Doors must be closed to allow the mirrors to fold with the power folding t, read DTCs. Does the same DTC reset? All Yes → Go To 2 No → The condition that caused this DTC is currently not present. Use the wiring diagram/schematic as a guide, and inspect the related 2 Remove the Passenger Folding Mirror Relay. t, erase DTC’s. NOTE: Doors must be closed to allow the mirrors to fold with the power folding t, read DTCs. Does the same DTC reset? All Yes → Go To 3 No → Replace the Passenger Folding Mirror Relay. Perform BODY VERIFICATION TEST - VER 1. 3 Disconnect the Passenger Folding Mirror Relay connector. All Yes → Repair the Passenger Folding Mirror Relay Control circuit for a short to voltage. No → Replace the Body Control Module. Perform BODY VERIFICATION TEST - VER 1. 935 POWER MIRROR |