|
|
|
Symptom: FOLD MIRROR OUTPUT FAILURE (EXPORT ONLY) POSSIBLE CAUSES INTERMITTENT CONDITION LEFT POWER MIRROR RIGHT POWER MIRROR LEFT FOLDING MIRROR UNFOLD DRIVER SHORT TO VOLTAGE RIGHT FOLDING MIRROR UNFOLD DRIVER SHORT TO VOLTAGE LEFT FOLDING MIRROR UNFOLD DRIVER SHORT TO GROUND RIGHT FOLDING MIRROR UNFOLD DRIVER SHORT TO GROUND BODY CONTROL MODULE TEST ACTION APPLICABILITY 1 With the DRBIII t, record and erase DTC’s. NOTE: Doors must be closed to allow the mirrors to fold with the power folding t, read DTCs. Does the same DTC reset? All Yes → Go To 2 No → The condition that caused this DTC is currently not present. Use the wiring diagram/schematic as a guide, and inspect the related 2 Disconnect the Left Power Mirror connector. t, erase DTC’s. Operate the Power Folding Mirror switch. t, read DTCs. Does the same DTC reset? All Yes → Go To 3 No → Replace the Left Power Mirror. Perform BODY VERIFICATION TEST - VER 1. 3 Disconnect the Right Power Mirror connector. t, erase DTC’s. Operate the Power Folding Mirror switch. t, read DTCs. Does the same DTC reset? All Yes → Go To 4 No → Replace the Right Power Mirror. Perform BODY VERIFICATION TEST - VER 1. 931 POWER MIRROR |