Audi A4. Body repair manual - part 59
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Measuring value block 125
Read Measuring Value Block
Indicated on display:
125
Engine 1 Transmission 1
ADR - Display field for connecting powertrain data-BUS
1 - means the ADR control module is a participant in the powertrain data-BUS
empty display field indicates ADR control module is not a participant in the
powertrain data-BUS
ABS - Display field for connecting powertrain data-BUS
1 - means the ABS control module is a participant in the powertrain data-BUS
empty display field indicates ABS control module is not a participant in the
powertrain data-BUS
Transmission - Display field for connecting powertrain data-BUS
1 - means the Transmission Control Module (TCM) is a participant in the powertrain
data-BUS
empty display field indicates Transmission Control Module (TCM) is not a participant
in the powertrain data-BUS
Engine - Display field for connecting powertrain data-BUS
1 - means the Engine Control Module (ECM) is a participant in the powertrain data-BUS
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
BUS
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Measuring value block 126
Read Measuring Value Block 126
Indicated on display:
A/C 1
A/C - Display field for connecting powertrain data-BUS
1 - means the A/C control module is a participant in the powertrain data-BUS
empty display field indicates A/C Control Module is not a participant in the powertrain data-
BUS
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Measuring value block 130
Read Measuring Value
Indicated on display:
Block 130
Parking assistance - display field for connecting comfort system data-BUS.
Connection
1- means the parking assistance control module is a participant in the comfort
system data-BUS
empty display field means the parking assistance control module is not a participant
in the comfort system data-BUS
Auxiliary heater - display field for connecting the comfort system data-BUS
1- means the auxiliary heater control module is a participant in the comfort system data-BUS
empty display field means the auxiliary heater control module is not a participant in the comfort
system data-BUS
Tire pressure - display field for connecting the comfort system data-BUS
1- means the tire pressure control module is a participant in the comfort system data-BUS
empty display field means the tire pressure control module is not a participant in the comfort system data-
BUS
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Measuring value block 140
Read Measuring Value
Indicated on display:
Block 140
Telematic - Display field for connecting information data-BUS
1 - means the Telematic control module is a participant in the information data-
BUS
empty display field indicates Telematic control module is not a participant in the
information data-BUS
Navigation - Display field for connecting information data-BUS
1 - means the navigation control module is a participant in the information data-BUS
empty display field indicates navigation control module is not a participant in the
information data-BUS
Telephone - Display field for connecting information data-BUS
1 - means the telephone control module is a participant in the information data-BUS
empty display field indicates telephone control module is not a participant in the information
data-BUS
Radio - Display field for connecting information data-BUS
1 - means the radio control module is a participant in the information data-BUS
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Adaptation (scan tool function 10)
Individual functions are called up by entering the
appropriate adaptation channel numbers (listed
Using measuring value blocks 10, 11, 12 and
15, the values that need to be transferred to the
new instrument cluster can be read out before
replacement.
Adaptation channels 42, 43, and 44 (see
according to the oil quality (measuring value
needed when the instrument cluster
communicates with the corresponding BUS
system..
components that are part of the powertrain
data-BUS.
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
comfort system data-BUS.
information data-BUS.
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Adaptation table:
Adaptation channel
Adaptation function
02
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Initiating "Adaptation" function 10
Rapid data transfer
HELP
Indicated on display
Select function XX
- Press buttons -1- and -0-. This selects "Adaptation", function 10.
- Press -Q- button to confirm input.
Rapid data transfer
Q
Indicated on display
10 - Adaptation
- Press -Q- button to confirm input.
Adaptation
Indicated on display:
Input channel number XX
Note:
After changing an adaptation value or ending an adaptation channel,
"Adaptation" function 10 must be performed again before selecting
another adaptation channel.
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Resetting SRI after service
Rapid data transfer
HELP
Indicated on display
Select function XX
- Press -1- and -0- and confirm by pressing the -Q- button.
Rapid data transfer
Q
Indicated on display
10 - Adaptation
- Press -Q- button to confirm input.
Adaptation
Indicated on display:
Input channel number XX
- Press buttons -0- and -2-.
- Press -Q- button to confirm input.
Notes:
The Service Reminder Indicator (SRI) is used to remind the driver
when a service is necessary. Indication is in center display.
Service reminder appears 1 month or 1200 miles before service limit
is reached. Resolution is 100 miles. Example for display: After a total
driving distance of 7000 miles, "SERVICE IN 1000 miles" is indicated.
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
The remaining distance to service can be
checked via the menu in center display by
pressing the clock set button once.
When a service event arrives, the text
information appears in the center display for 5
seconds when ignition is switched on. It is
shown after the note for automatic transmission
and a target input for navigation (if applicable).
Display: "SERVICE".
The currently valid specifications can be found
in the "Maintenance" book.
Repair Manual, Maintenance
Channels 40, 41, and 46, which display the
dynamic values of the service event are set to
"0" automatically.