Audi A4. Body repair manual - part 58
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Display group
Indicated on display
number
050
1 = Trip odometer
2 = Engine RPM
3 = Oil temperature
4 = Coolant temperature
125
1 = Engine
2 = Transmission
3 = ABS
4 = ADR
126
1 = A/C
130
1 = Tire pressure
2 = Auxiliary heater
3 = Unassigned
4 = Parking assistance
140
1 = Radio
2 = Telephone
3 = Navigation
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
processing)
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Notes:
For an instrument cluster replacement, data
from display groups 10...15 must be printed out.
Measuring value blocks 125 and 126 indicate
the participants in the powertrain data-BUS.
Measuring value block 130 indicates the
participants in the comfort system databus.
Measuring value block 140 indicates the
participants in the information data-BUS
Display will always indicate the actual values
obtained from the sensors. The values which
appear on the instrument cluster are filtered
and may be different.
If the actual engine coolant temperature is
between 80 C and 100 C, instrument cluster
will always show 90 C.
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Measuring value block 001
Read Measuring Value Block 1
Indicated on display:
30 MPH
2400 RPM Oil p2 <min.
12: 20 h
Time
Oil pressure switch 2
Oil p2 < min.
Oil p2 OK
Engine speed (RPM)
0 - 9990 RPM
Speed
0 - 187 MPH
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Measuring value block 2
Read Measuring Value Block 2
Indicated on display:
6256 mi
43 l
82 Ohm
23.0 C
Outside air temperature
-40 to +70
C
Tank sensor
approx. 280 Ohm (empty) ... approx. 40 Ohm (full)
Fuel gauge
0 - 100 1
Display value of trip odometer
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Measuring value block 3
Read Measuring Value Block 3
Indicated on display:
85.0 C
Coolant temperature
50 - 130
C
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Measuring value block 10
Read Measuring Value Block 10
Indicated on display:
Channel 30
128 Channel 9
626 mi
Input value for adaptation of odometer
Adaptation channel for odometer
Factory adjusted adaptation value
Adaptation channel of fuel gauge sender resistance range
Note:
If the value "128" in display field 2 was changed due to a customer complaint, the changed value must be transferred when
replacing instrument cluster.
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Measuring value block 11
Read Measuring Value Block 11
Indicated on display:
Channel 4
2
Channel 3
100
Factory adjusted adaptation value
Adaptation channel of fuel gauge
Selected language
1 is German
2 is English
Adaptation channel for language version of driver information display
Note:
If the value "100" in display field 4 was changed due to a customer complaint, the changed value must be transferred when
replacing instrument cluster.
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Measuring value block 12
Read Measuring Value Block 12
Indicated on display:
Channel 40
8 Channel 41
10
Time expired
For example, 10 means 10 days
Adaptation channel for time since service
Driven miles
8 means 800 miles
Adaptation channel for distance driven since service
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Measuring value block 13
Read Measuring Value Block 13
Indicated on display:
Channel 42
8 Channel 43
8
Maximum mileage
8 means 8000 miles1)
Adaptation channel for maximum mileage
Minimum mileage performance2)
8 means 8000 miles1)
Adaptation channel for minimum mileage
Note:
1) The currently valid specifications can be found in the "Maintenance" book.
Repair Manual, Maintenance
2) For USA-vehicles: For instrument cluster of the manufacturer Marelli, the starting value (first value of remaining distance
without calculating) is set to 8000 miles. For instrument clusters of the manufacturer VDO, the starting value is set to 8100
miles. The 100 miles which are displayed in excess, are compensated during driving. For vehicles with 1.8 Liter Turbo engine,
the starting value of 5000 is set. For both manufacturers 8000 or 8100 miles is displayed anyway. The damper action also
occurs from the actual remaining interval during driving operation.
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Measuring value block 14
Read Measuring Value Block 14
Indicated on display:
Channel 44
365
Maximum time interval
365 means 365 days/1 year1)
Adaptation channel for maximum time interval
Note:
1) The currently valid specifications can be found in the "Maintenance" book.
Repair Manual, Maintenance
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Measuring value block 15
Read Measuring Value Block 15
Indicated on display:
Channel 45
1 Channel 46
300
Total consumption quantity
300 means 300 liters
Adaptation channel for the total consumption quantity (gasoline engines only)
Oil quality
Input of 1 to 4 possible 1)
The "1" is entered in the USA
Adaptation channel for oil quality
Notes:
1) The currently valid specifications can be found in the "Maintenance" book.
Repair Manual, Maintenance
Oil quality must be re-adapted after every service.
Instrument cluster with long service life, On Board Diagnostic (OBD) (from m.y. 2000)
Measuring value block 50
Read Measuring Value Block 50
Indicated on display:
6256 mi
2400 RPM
99
C
85.0 C
Coolant temperature
50 - 130
C
Oil temperature
Engine speed (RPM)
0 - 9990 RPM
Display value of trip odometer