|
|
Section 10 STEERING/FRONT SUSPENSION 1 A33G0FA 1. Connectors unplugged Unplug LH harness on top of steering column. Using the multilock-terminal housing extraction Pull heating grip wires out of brake light switch/ Insert the open side of a 23 mm (7/8 in) wrench CAUTION: Pay attention not to damage wires Using a plastic hammer, tap on the side of the Grip Installation: Installation is the opposite procedure of the re- Clean handlebar ends and inside of heating grip WARNING Handlebar end and inside of heating grip Position grip on handlebar with its harness aligned Use the appropriate insertion tool to properly in- MODEL TOOL PART NUMBER Models with straight grips 529 035 897 Models with J-hooks 529 035 936 A32G2BA CAUTION: Installing grip without the insertion Position the insertion tool at the outside end of Using a plastic hammer, tap on tool to push grip 1 A33G0CA 2 1. Harness Properly route harness then reinstall removed 438 mmr2005-097 |