Honda Accord (2019 year). Manual - part 12

 

  Index      Honda     Honda Accord - service manual 2019 year in english

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  10  11  12  13   ..

 

 

Honda Accord (2019 year). Manual - part 12

 

 

176

uu

Locking and Unlocking the Doors

u

Locking/Unlocking the Doors from the Inside

Co
ntrols

Locking/Unlocking the Doors from the Inside

Locking a door

Push the lock tab forward.

Unlocking a door

Pull the lock tab rearward.

Using the Lock Tab

1

Using the Lock Tab

When you lock the door using the lock tab on the 
driver’s door, all the other doors and the fuel fill door 
lock at the same time.
When you unlock the door using the lock tab on the 
driver’s door, only the driver’s door will unlock.

To Unlock

Lock Tab

To Lock

Continued

177

uu

Locking and Unlocking the Doors

u

Locking/Unlocking the Doors from the Inside

Co
ntrols

Pull the front door inner handle.

u

The door unlocks and opens in one 
motion.

Unlocking and opening the driver’s door from the inner handle unlocks all the other 
doors and the fuel fill door.

To avoid all the doors to be unlocked, use the lock tab on the driver’s door to unlock, 
then lock again before opening the door.

u

This setting works for one time only. If you do not want all the doors to be 
unlocked all the time, customize the Auto Door Unlock setting to Off

*1

/OFF

*2

 

using the audio/information screen.

Customized Features P. 370, 381

*1 : Models with color audio
*2 : Models with Display Audio

Unlocking Using the Front Door Inner Handle

1

Unlocking Using the Front Door Inner Handle

The front door inner handles are designed to allow 
front seat occupants to open the door in one motion. 
However, this feature requires that front seat 
occupants never pull a front door inner handle while 
the vehicle is in motion.

Children should always ride in a rear seat where 
childproof door locks are provided.

Childproof Door Locks P. 178

Inner Handle

uu

Locking and Unlocking the Doors

u

Childproof Door Locks

178

Co
ntrols

Press the master door lock switch in (as 
shown) to lock or unlock all the doors, fuel fill 
door.

Childproof Door Locks

The childproof door locks prevent the rear doors from being opened from the inside 
regardless of the position of the lock tab.

Slide the lever in the rear door to the lock 
position, and close the door.

When opening the door

Open the door using the outside door handle.

Using the Master Door Lock Switch

To Unlock

Master Door 
Lock Switch

To Lock

Setting the Childproof Door Locks

1

Childproof Door Locks

To open the door from the inside when the 
childproof door lock is on, put the lock tab in the 
unlock position, lower the rear window, put your 
hand out of the window, and pull the outside door 
handle.

Unlock

Lock

179

uu

Locking and Unlocking the Doors

u

Auto Door Locking/Unlocking

Co
ntrols

Auto Door Locking/Unlocking

Your vehicle locks or unlocks all doors automatically when a certain condition is met.

Drive lock mode

All doors lock when the vehicle’s speed reaches about 10 mph (15 km/h).

Driver’s door open mode

All doors unlock when the driver’s door is opened.

Auto Door Locking

Auto Door Unlocking

1

Auto Door Locking/Unlocking

You can turn off or change to another auto door 
locking/unlocking setting using the audio/
information screen.

Customized Features P. 370, 381

180

Co
ntrols

Opening and Closing the Trunk

Precautions for Opening/Closing the Trunk

Opening the trunk

Opening the trunk all the way.

u

If it is not fully opened, the trunk lid may begin to close under its own weight.

Closing the trunk

Keep the trunk lid closed while driving to: 

u

Avoid possible damage.

u

Prevent exhaust gas from leaking into the vehicle.

Exhaust Gas Hazard P. 75

Using the Trunk Opener

Press and hold the trunk opener on the 
driver’s door to unlock and open the trunk.

When You Cannot Open the Trunk P. 695

Trunk Opener

181

uu

Opening and Closing the Trunk

u

Using the Trunk Release Button

*

Co
ntrols

Using the Trunk Release Button

*

Push up the release button on the trunk lid 
after all the doors are unlocked.

When You Cannot Open the Trunk P. 695

Even if the trunk is locked, you can open the 
trunk if you carry the remote.

u

Some exterior lights flash twice and the 
beeper sounds.

Using the Remote Transmitter

Press the trunk release button for 
approximately one second to unlock and open 
the trunk.

1

Using the Trunk Release Button

*

If you forget the remote inside, the beeper will 
sound and the trunk will not close.

A person who is not carrying the remote can 
unlock the trunk if a person who is carrying it is 
within range.

If the beeper sounds after you close the trunk, 
move the remote away from the trunk and close 
again.

The remote may not operate if it is too close to the 
trunk.

Trunk Release Button

Trunk Release Button

* Not available on all models

182

uu

Opening and Closing the Trunk

u

Trunk Main Switch

*

Co
ntrols

Trunk Main Switch

*

The trunk main switch disables the trunk 
release button on the remote transmitter and 
the trunk release button on the trunk lid and 
trunk opener on the driver’s door to protect 
luggage in the trunk.
1. Make sure the rear seat-back is not folded 

down.

2. Turn off the trunk main switch in the glove 

box.

3. Lock the glove box.

Emergency Trunk Opener

The trunk release lever allows you to open the 
trunk from inside for your safety.

Slide the release lever in the direction of the 
arrow.

1

Trunk Main Switch

*

If you need to give the key to someone else, remove 
the built-in key from the remote by sliding the release 
knob, and give the remote as a valet key.

ON

OFF

Main Switch

1

Emergency Trunk Opener

Parents should decide if their children should be 
shown how to use this feature.

Lever

* Not available on all models

183

Co
ntrols

Security System

Immobilizer System

The immobilizer system prevents a key that has not been pre-registered from 
starting the engine. Each key contains electronic transmitters that use electronic 
signals to verify the key.

Pay attention to the following when pressing the ENGINE START/STOP button:
• Do not allow objects that emit strong radio waves near the ENGINE START/

STOP button.

• Make sure the key is not covered by or touching a metal object.
• Do not bring a key from another vehicle’s immobilizer system near the ENGINE 

START/STOP button.

• Do not put the key near magnetic items. Electronic device, such as televisions and 

audio systems emit strong magnetic fields. Note that even a key chain can 
become magnetic.

1

Immobilizer System

NOTICE

Leaving the key in the vehicle can result in theft or 
accidental movement of the vehicle. 
Always take the key with you whenever you leave the 
vehicle unattended.

Do not alter the system or add other devices to it.
Doing so may damage the system and make your 
vehicle inoperable.

Apply and hold the brake pedal before turning the 
vehicle on the first time after the battery has been 
disconnected.

Canadian models

184

uu

Security System

u

Security System Alarm

Co
ntrols

Security System Alarm

The security system alarm activates when the trunk, hood or doors are forcibly 
opened. The alarm does not activate if the trunk or doors are opened with the key, 
remote transmitter, or smart entry with push button start system

*

.

However, the alarm activates if a door is opened with the key and then the 
transmission is taken out of 

(

P (continuously variable transmission models) or the 

hood is opened before the power mode is in ON.

When the security system alarm activates

The horn sounds intermittently, and some the exterior lights flash.

To deactivate the security system alarm

Unlock the vehicle using the key, remote transmitter or smart entry with push 
button start system

*

. The system, along with the horn and flashing lights, is 

deactivated.

Setting the security system alarm

The security system alarm automatically sets when the following conditions have 
been met:
• The power mode is set to VEHICLE OFF.
• The hood and trunk are closed.
• All doors are locked from outside with the key, remote transmitter, or smart entry 

with push button start system

*

.

When the security system alarm sets

The security system alarm indicator in the instrument panel blinks and the blinking 
interval changes after about 15 seconds.

To cancel the security system alarm

The security system alarm is canceled when the vehicle is unlocked using the key

*

remote transmitter or smart entry with push button start system

*

, or when the power 

mode is set to ON. The security system alarm indicator goes off at the same time.

1

Security System Alarm

Do not alter the system or add other devices to it.
Doing so may damage the system and make your 
vehicle inoperable.

The security alarm continues for a maximum of two 
minutes until the security system alarm deactivates.

Do not set the security system alarm when someone 
is in the vehicle or a window is open. The system can 
accidentally activate when:

Unlocking the door with the lock tab.

Opening the trunk with the trunk opener or the 
emergency trunk opener.

Opening the hood with the hood release.

Taking the transmission out of 

(

P.

If the battery goes dead after you have set the 
security system alarm, the security alarm may go off 
once the battery is recharged or replaced.
If this occurs, deactivate the security system alarm by 
unlocking a door using the key, remote transmitter, 
or smart entry with push button start system

*

.

Continuously variable transmission models

* Not available on all models

185

uu

Security System

u

Security System Alarm

Co
ntrols

The panic button on the remote 
transmitter

If you press the panic button for 
approximately one second, the following will 
occur for about 30 seconds:
• The horn sounds.
• Some exterior lights flash.

Canceling panic mode

• Press any button on the remote transmitter.
• Set the power mode to ON.

Panic Mode

Panic Button

186

Co
ntrols

Opening and Closing the Windows

Opening/Closing the Power Windows

The power windows can be opened and closed when the power mode is in ON, 
using the switches on the doors. The driver’s side switches can be used to open and 
close all the windows.

The power window lock button on the driver’s side must be switched off (indicator 
off) to open and close the windows from anywhere other than the driver’s seat.

When the power window lock button is pressed, the indicator comes on and you 
can only operate the driver’s window. Turn the power window lock button on 
(indicator on) if a child is in the vehicle.

Manual operation

To open: Push the switch down lightly, and 
hold it until the desired position is reached.
To close: Pull the switch up lightly, and hold it 
until the desired position is reached.

Automatic operation

To open: Push the switch down firmly.
To close: Pull the switch up firmly.

The window opens or closes completely. To 
stop the window at any time, push or pull the 
switch briefly.

Opening/Closing Windows with Auto-Open/Close Function

1

Opening/Closing the Power Windows

The power windows can be operated for up to 10 
minutes after you set the power mode to VEHICLE 
OFF.
Opening either front door cancels this function.

Auto Reverse
If a power window senses resistance when closing 
automatically, it will stop closing and reverse 
direction.

The driver’s window auto reverse function is disabled 
when you continuously pull up the switch.

The auto reverse function stops sensing when the 
window is almost closed to ensure that it fully closes.

3

WARNING

Closing a power window on someone’s 
hands or fingers can cause serious injury.

Make sure your passengers are away from 
the windows before closing them.

Power 
Window 
Lock Button

Indicator

Driver’s Window 
Switch

Front Passenger’s 
Window Switch

187

uu

Opening and Closing the Windows

u

Opening/Closing the Power Windows

Continued

Co
ntrols

To open: Push the switch down.
To close: Pull the switch up.

Release the switch when the window reaches 
the desired position.

To open: Press the unlock button, and then 
within 10 seconds, press it again and hold it.

If the windows and moonroof

*

 stop midway, 

repeat the procedure.

Opening/Closing Windows without Auto-Open/Close Function

Close

Open

Opening Windows and Moonroof

*

 with the Remote

Unlock 
Button

* Not available on all models

188

uu

Opening and Closing the Windows

u

Opening/Closing the Power Windows

Co
ntrols

To open: Unlock the driver’s door with the 
key. Within 10 seconds of returning the key to 
the central position, turn the key in the unlock 
direction and hold it there.
To close: Lock the driver’s door with the key. 
Within 10 seconds of returning the key to the 
central position, turn the key in the lock 
direction and hold it there.

Release the key to stop the windows/
moonroof

*

 at the desired position. If you want 

further adjustment, repeat the same 
operation.

Opening/Closing the Windows and Moonroof

*

 with the Key

Close

Open

* Not available on all models

189

Co
ntrols

Opening and Closing the Moonroof

*

You can only operate the moonroof when the power mode is in ON. Use the switch 
in the front of the ceiling to open and close the moonroof.

Automatic operation

To open: Pull the switch back firmly.
To close: Push the switch forward firmly.

The moonroof will automatically open or close 
all the way. To stop the moonroof midway, 
pull or push the switch briefly.

Manual operation

To open: Pull the switch back lightly, and 
hold it until the desired position is reached.
To close: Push the switch forward lightly, and 
hold it until the desired position is reached.

Tilting the moonroof up

To tilt: Push on the center of the moonroof 
switch.
To close: Push the switch forward firmly, 
then release.

Opening/Closing the Moonroof

1

Opening/Closing the Moonroof

NOTICE

Opening the moonroof in below freezing 
temperature or when it is covered with snow or ice 
can damage the moonroof panel or motor.

The power moonroof can be operated for up to 10 
minutes after you set the power mode to OFF.
Opening either front door cancels this function.

When resistance is detected, the auto reverse 
function causes the moonroof to change directions, 
then stop. Auto reverse stops sensing when the 
moonroof is almost closed to ensure that it fully 
closes. Make sure that all objects, including fingers, 
are clear of the moonroof.

You can use the remote transmitter or the key to 
operate the moonroof.

Opening Windows and Moonroof

*

 with 

the Remote P. 187

Opening/Closing the Windows and 

Moonroof

*

 with the Key P. 188

3

WARNING

Opening or closing the moonroof on 
someone’s hands or fingers can cause 
serious injury.

Make sure all hands and fingers are clear of 
the moonroof before opening or closing it.

Open

Close

Tilt

* Not available on all models

190

Co
ntrols

Operating the Switches Around the Steering Wheel

ENGINE START/STOP Button

*1 : Manual transmission models
*2 : Continuously variable transmission models for Canadian models
*3 : U.S. models
*4 : Automatic transmission models

Changing the Power Mode

1

ENGINE START/STOP Button

ENGINE START/STOP Button Operating Range
You can start the engine when the remote is inside 
the vehicle.

If the battery of the remote is getting low, the engine 
may not start when you push the ENGINE START/
STOP
 button. If the engine does not start, refer to 
the following link. 

If the Remote Battery is Weak P. 672

The engine may also run if the remote is close to the 
door or window, even if it is outside the vehicle.

ON mode:
The ENGINE START/STOP button is red when the 
engine is running.

Operating Range

Continuously Variable Transmission

Automatic/Manual Transmission

VEHICLE OFF (LOCK)
The button is off.
The steering wheel is locked

*1*2

.

The power to all electrical 
components is turned off.

Press the button without the 
transmission in 

(

P.

Put the transmission into 

(

then press the button.

Press the button.

Without pressing the 
clutch

*1

 or brake

*4

 pedal

Without pressing 
the brake pedal

ACCESSORY
The button blinks (in red).
Operate the audio system and 
other accessories in this position.

ON
The button blinks (in red).
All electrical components can be 
used.

Put the transmission into 

(

P

*3

.

*3

Continued

191

uu

Operating the Switches Around the Steering Wheel

u

ENGINE START/STOP Button

Co
ntrols

If you leave the vehicle for 30 to 60 minutes with the transmission in 

(

P

*1

 and the 

power mode in ACCESSORY, the vehicle automatically goes into the mode similar to 
VEHICLE OFF (LOCK) to avoid draining the battery.

When in this mode:
The steering wheel does not lock.
You cannot lock or unlock doors with the remote transmitter or the smart entry with 
push button start system

*

.

Press the ENGINE START/STOP button twice to switch the mode to VEHICLE OFF 
(LOCK).

If you open the driver’s door when the power mode is set to ACCESSORY, a warning 
buzzer sounds.

*1 : Automatic transmission/Continuously variable transmission models

Automatic Power Off

Power Mode Reminder

1

Changing the Power Mode

If the power mode does not change from VEHICLE 
OFF to ACCESSORY, press the ENGINE START/STOP 
button while moving the steering wheel left and 
right. The steering wheel will unlock, allowing the 
mode to change.

Do not leave the power mode in ACCESSORY or ON 
when you get out.

Manual transmission models
Continuously variable transmission models 
for Canadian models

Manual transmission models

Continuously variable transmission models 
for Canadian models

* Not available on all models

 

 

 

 

 

 

 

Content   ..  10  11  12  13   ..