|
|
– Remove the air guide -A- in the direction of -arrows- from the auxiliary cooler. Note Place a cloth underneath to catch any escaping coolant. – Clamp off the coolant hoses -A and B- with Hose Clamps - Up To 25mm - 3094- . Open the spring clamps and remove the hose clamp from the auxiliary cooler. – Remove the bolts -arrows-. Remove the auxiliary cooler -A- upward from the bracket. Installing Gr. 63 ; Front Bumper; Bumper Cover, Removing and Instal‐ ling . – Install the wheel housing liner. Refer to ⇒ Body Exterior; Rep. Gr. 66 ; Wheel Housing Liner; Front Wheel Housing Liner, Removing and Installing . – Install the noise insulation. Refer to ⇒ Body Exterior; Rep. Gr. 66 ; Noise Insulation; Overview - Noise Insulation . – Install the wheel. Refer to ⇒ Suspension, Wheels, Steering; Rep. Gr. 44 ; Wheels and Tires . Tightening Specifications ⇒ “4.2 Overview - Auxiliary Cooler”, page 245 . |