Volkswagen Golf / Golf GTI / Golf Variant. Service manual - part 420

❑ The design depends on the vehicle equipment
❑ Removing and installing. Refer to

⇒ “2.14.1 Door Sill Side Seat Trim, Removing and Installing, Except Power Seat”, page 345

 .

9 - Seat Trim Panel

❑ Tunnel side
❑ Removing and installing. Refer to

⇒ “2.13 Tunnel-Side Seat Trim, Removing and Installing”, page 344

 .

10 - Seat Belt Latch

❑ Removing and installing. Refer to 

⇒ “1.14 Front Seat Belt Latch, Removing and Installing”, page 120

 .

2.5.2

Overview - Seat Pan, Power

Note

The illustration shows the driver side seat pan. The seat pan on the front passenger side is similar.

1 - Seat Cushion

❑ Seat Pan Cover and

Padding, Removing and

installing. Refer to

⇒ “1.4 Seat Pan Cover

and Cushion, Removing

and Installing”,

page 405

 .

❑ Seat pan cover and

cushion, separating.

Refer to

⇒ “1.6 Seat Pan Cover

and Cushion, Separat‐

ing”, page 408

 .

2 - Seat Pan
3 - Screw

❑ 22 Nm
❑ Quantity: 4
❑ Self-locking
❑ Replace after removing
❑ Threaded holes for the

bolts must be cleaned,

for example, with a

thread tap

4 - Screw

❑ 8 Nm
❑ Quantity: 4

5 - Bracket

❑ For the sill-side seat trim

panel

❑ Removing and instal‐

ling. Refer to

⇒ “2.15.2 Seat Trim

Bracket, Removing and

Installing, Power Seat”, page 349

 .

6 - Expanding Rivet
7 - Seat Trim Panel

❑ Sill-side
❑ Removing and installing. Refer to

⇒ “2.14.2 Door Sill Side Seat Trim, Removing and Installing, Power Seat”, page 347

 .

8 - Seat Pan Lower Frame

❑ Driver Seat Forward/Back Adjustment Motor - V28-
❑ Front Passenger Seat Forward/Back Adjustment Motor - V31-
❑ Cannot be disassembled
❑ Removing and installing. Refer to

⇒ “2.20 Seat Pan with Driver/Front Passenger Seat Forward/Back Adjustment Motor V28 / V31 , Re‐

moving and Installing”, page 357

 .

❑ To replace, install the seat belt latch in the new lower frame. Refer to

⇒ “1.14 Front Seat Belt Latch, Removing and Installing”, page 120

9 - Bushing

❑ Inserted in all bearing locations
❑ Cannot be replaced with service equipment
❑ If the bushing is damaged, the seat pan lower frame must be replaced

10 - Seat Trim Panel

❑ Tunnel side
❑ Removing and installing. Refer to

⇒ “2.13 Tunnel-Side Seat Trim, Removing and Installing”, page 344

 .

11 - Screw

❑ Refer to 

⇒ “1.5 Overview - Front Seat Belt Latch”, page 95

12 - Seat Belt Latch

❑ Removing and installing. Refer to 

⇒ “1.14 Front Seat Belt Latch, Removing and Installing”, page 120

 .

2.5.3

Overview - Torsion Bar

1 - Seat Pan
2 - Bearing

❑ For the torsion bar
❑ Slide into the guide

3 - Torsion Bar

❑ Lubricated. Refer to the

Parts Catalog for the

grease.

2.6

Overview - Seat Height Adjuster

⇒ “2.6.1 Overview - Seat Height Adjuster, Except Power Seat”,

page 331
⇒ “2.6.2 Overview - Seat Height Adjuster, Power Seat”,

page 332

2.6.1

Overview - Seat Height Adjuster, Except Power Seat

1 - Screws

❑ 6.5 Nm
❑ Quantity: 2
❑ Note the different bolt

length -item 8-

2 - Seat Height Adjusting Lever

❑ For seat height adjust‐

ment

❑ Removing and instal‐

ling. Refer to

⇒ “2.19 Seat Height Ad‐

juster, Removing and

Installing”, page 353

 .

3 - Clip

❑ Make sure it is secure

4 - Seat Height Adjustment

Handle

❑ Removing and instal‐

ling. Refer to

⇒ “2.18 Seat Height Ad‐

justment Handle, Re‐

moving and Installing”,

page 352

 .

5 - Seat Pan

❑ Overview. Refer to

⇒ “2.5.1 Overview - Seat

Pan, Except Power

Seat”, page 327

 .

6 - Lock Washer

❑ Replace after removing

7 - Seat Height Adjuster

❑ Removing and instal‐

ling. Refer to

⇒ “2.19.1 Seat Height Adjuster, Removing and Installing, Except Power Seat”, page 353

 .

8 - Screw

❑ 10 Nm
❑ Note the different bolt lengths -item 1-

9 - Screws

❑ 8 Nm
❑ Quantity: 2