Volkswagen Golf / Golf GTI / Golf Variant. Service manual - part 419

❑ Backrest release, removing and installing. Refer to

⇒ “2.26 Backrest Release, Removing and Installing”, page 362

 .

❑ Backrest release mount, removing and installing. Refer to

⇒ “2.28 Backrest Release Mount, Removing and Installing”, page 363

 .

7 - Lever

❑ For manually adjusting lumbar support
❑ Removing and installing. Refer to

⇒ “2.22 Lumbar Support Adjuster, Removing and Installing”, page 359

 .

8 - Hand Wheel

❑ For manual backrest adjustment
❑ Removing and installing. Refer to

⇒ “2.21.1 Backrest Adjuster, Removing and Installing, Except Power Seat”, page 358

 .

9 - Screw

❑ 34 Nm
❑ Quantity: 4
❑ Self-locking
❑ Replace after removing
❑ Threaded holes for the bolts must be cleaned, for example, with a thread tap

10 - Seat Pan

❑ Overview. Refer to 

⇒ “2.5.1 Overview - Seat Pan, Except Power Seat”, page 327

 .

2.4.2

Overview - Front Backrest, Power Seat

Note

The illustration shows the driver side front backrest. The front backrest on the front passenger side is similar.

1 - Headrest

❑ Removing and instal‐

ling. Refer to

⇒ “2.23 Headrest, Re‐

moving and Installing”,

page 360

 .

❑ Must be correctly locked

in the headrest guides

2 - Cover

❑ Quantity: 2

3 - Headrest Guide

❑ Quantity: 2
❑ Removing and instal‐

ling. Refer to

⇒ “2.24 Headrest Guide,

Removing and Instal‐

ling”, page 361

 .

4 - Backrest

❑ Removing and instal‐

ling. Refer to

⇒ “2.16 Front Backrest,

Removing and Instal‐

ling”, page 349

 .

❑ Backrest Cover and

Cushion, Removing and

installing. Refer to

⇒ “1.5 Backrest Cover

and Cushion, Removing

and Installing”,

page 406

 .

❑ Backrest Cover and

Cushion, Separating.

Refer to

⇒ “1.7 Backrest Cover

and Cushion, Separat‐

ing”, page 410

 .

❑ With power lumbar support. Refer to 

⇒ page 326

5 - Screw

❑ 34 Nm
❑ Quantity: 4
❑ Self-locking
❑ Replace after removing
❑ Threaded holes for the bolts must be cleaned, for example, with a thread tap

6 - Seat Pan

❑ Overview. Refer to 

⇒ “2.5.2 Overview - Seat Pan, Power”, page 328

 .

2.4.3

Overview - Front Backrest, Power Lumbar Support

1 - No Replacement Part

❑ The washer is molded in

the lumbar support.

2 - Lumbar Support

❑ Driver side with Driver

Seat Lumbar Support

Curvature Adjustment

Motor - V125- / Driver

Seat Lumbar Support

Height Adjustment Mo‐

tor - V129-

❑ Front passenger side

with Front Passenger

Seat Lumbar Support

Curvature Adjustment

Motor - V126- / Front

Passenger Seat Lum‐

bar Support Height Ad‐

justment Motor - V130-

❑ Removing and instal‐

ling. Refer to

⇒ “2.37 Lumbar Support

Adjustment Motors

V125 / V126 / V129 /

V130 , Removing and

Installing”, page 372

 .

3 - Backrest Frame
4 - Rivet

2.5

Overview - Seat Pan

⇒ “2.5.1 Overview - Seat Pan, Except Power Seat”, page 327
⇒ “2.5.2 Overview - Seat Pan, Power”, page 328
⇒ “2.5.3 Overview - Torsion Bar”, page 330

2.5.1

Overview - Seat Pan, Except Power Seat

Note

The illustration shows the driver side seat pan. The seat pan on the front passenger side is similar.

1 - Seat Cushion

❑ Seat Pan Cover and

Padding, Removing and

installing. Refer to

⇒ “1.4 Seat Pan Cover

and Cushion, Removing

and Installing”,

page 405

 .

❑ Seat pan cover and

cushion, separating.

Refer to

⇒ “1.6 Seat Pan Cover

and Cushion, Separat‐

ing”, page 408

 .

2 - Seat Pan

❑ Vehicle equipment with

a storage compartment.

Refer to 

⇒ page 334

3 - Bracket

❑ For the sill-side seat trim

panel

❑ Removing and instal‐

ling. Refer to

⇒ “2.15.1 Seat Trim

Bracket, Removing and

Installing, Except Power

Seat”, page 348

 .

4 - Screw

❑ 8 Nm
❑ Quantity: 3

5 - Hand Wheel

❑ For manual backrest ad‐

justment

❑ Removing and instal‐

ling. Refer to

⇒ “2.21.1 Backrest Adjuster, Removing and Installing, Except Power Seat”, page 358

 .

6 - Expanding Rivet
7 - Handle

❑ For seat height adjustment. Refer to 

⇒ page 331

❑ Removing and installing. Refer to

⇒ “2.18 Seat Height Adjustment Handle, Removing and Installing”, page 352

 .

8 - Seat Trim Panel

❑ Sill-side