Volkswagen Golf / Golf GTI / Golf Variant. Service manual - part 300

2.2.2

Overview - Attachments, Sedan GTI

1 - Bumper Cover

❑ PP/EPDM material
❑ Removing and instal‐

ling. Refer to

⇒ “2.5.1 Bumper Cover,

Removing and Instal‐

ling, Sedan”,

page 337

 .

2 - Rear Reflector

❑ Right and left
❑ Secured in the bumper

cover

❑ To be removed only with

bumper cover removed

3 - Screws

❑ 2 Nm
❑ Quantity: 2 on each side

4 - Adapter

❑ Connects the spoiler

with the bumper cover

❑ Additional step. Refer to

⇒ page 340

 .

5 - Spring Nut

❑ Quantity: 2 on each side

6 - Spoiler

❑ PC/ABS material
❑ Secured in the bumper

cover

❑ To be removed only with

bumper cover removed

❑ There are different ver‐

sions. Refer to the Parts

Catalog for the allocation.

7 - Clips

❑ Quantity: 4
❑ Different numbers for attaching are also possible

8 - License Plate Holder

❑ Not installed on all models for all markets.
❑ There are different versions. Refer to the Parts Catalog for the allocation.

9 - Adapter

❑ Connects the spoiler with the bumper cover
❑ Additional step. Refer to 

⇒ page 340

 .

10 - Spring Nut

❑ Quantity: 3 on each side

2.2.3

Overview - Attachments, Wagon

1 - Bumper Cover

❑ PP/EPDM material
❑ Removing and instal‐

ling. Refer to

⇒ “2.5.2 Bumper Cover,

Removing and Instal‐

ling, Wagon”,

page 341

 .

2 - Adapter

❑ Right
❑ Connects the spoiler to

the bumper cover.

3 - Towing Eye Cap

❑ Engaged in bumper

cover

4 - Rear Reflector

❑ Right
❑ Secured in the bumper

cover

❑ To be removed only with

bumper cover removed

5 - Spoiler

❑ PC/ABS material
❑ Secured in the bumper

cover

❑ To be removed only with

bumper cover removed

❑ There are different ver‐

sions. Refer to the Parts

Catalog.

6 - Left Rear Reflector

❑ Secured in the bumper

cover

❑ To be removed only with bumper cover removed

7 - Adapter

❑ Left
❑ Connects the spoiler to the bumper cover.

1 - Upper Insulation

❑ Cut according to the for‐

mat from the previous

bumper cover

2 - Center Insulation

❑ Cut according to the for‐

mat from the previous

bumper cover

3 - Lower Insulation

❑ Cut according to the for‐

mat from the previous

bumper cover

4 - Bumper Cover

❑ Removing and instal‐

ling. Refer to

⇒ “2.5.2 Bumper Cover,

Removing and Instal‐

ling, Wagon”,

page 341

 .

2.3

Overview - Impact Member

1 - Impact Member

❑ There are different ver‐

sions. Refer to the Parts

Catalog for the alloca‐

tion.

❑ Removing and instal‐

ling. Refer to

⇒ “2.6 Impact Member,

Removing and Instal‐

ling”, page 343

 .

❑ Vehicles with trailer

hitch. Refer to

⇒ “10.1 Overview - Trail‐

er Hitch”, page 459

 .

2 - Bolt

❑ 20 Nm + 90°
❑ Quantity: 4 on the right

side

❑ Quantity: 3 on the left

side

3 - Foam Piece

❑ Is engaged with the im‐

pact member -1-

❑ There are different ver‐

sions. Refer to the Parts

Catalog for the alloca‐

tion.

4 - Cap

❑ Not with trailer hitch