Volkswagen Golf / Golf GTI / Golf Variant. Service manual - part 10

– Press the cap on the carbon brushes -A- down in direction of

-arrow- until it is flush with the voltage regulator housing.

– Install new cap -1- on the Generator - C- .

Tightening Specifications

Component

Tightening Specification

Voltage Regulator - C1- screws

4 Nm

3

Starter

⇒ “3.1 Overview - Starter”, page 30
⇒ “3.2 Starter, Removing and Installing”, page 33

3.1

Overview - Starter

⇒ “3.1.1 Overview - Starter, Vehicles with Manual Transmission”,

page 30
⇒ “3.1.2 Overview - Starter, Vehicles with DSG Transmission

DQ200–7F”, page 31
⇒ “3.1.3 Overview - Starter, Vehicles with DSG Transmission

DQ250-6F”, page 32
⇒ “3.1.4 Overview - Starter, Vehicles with Automatic Transmis‐

sion”, page 33

3.1.1

Overview - Starter, Vehicles with Manual Transmission

1 - Starter - B-

❑ Removing and instal‐

ling. Refer to

⇒ “3.2.1 Starter, Re‐

moving and Installing,

Vehicles with Manual

Transmission”,

page 33

 .

2 - Double Bolt

❑ 80 Nm

3 - Ground Cable

❑ Depending on the vehi‐

cle equipment level

4 - Nut

❑ 20 Nm
❑ Depending on the vehi‐

cle equipment level

5 - Connector
6 - Nut

❑ 20 Nm

7 - Cap
8 - Terminal 30/B+
9 - Nut

❑ 20 Nm
❑ Depending on the vehi‐

cle equipment level

10 - Ground Cable

❑ Depending on the vehi‐

cle equipment level

11 - Bracket

❑ For the wiring harness

3.1.2

Overview - Starter, Vehicles with DSG Transmission DQ200–7F

1 - Starter - B-

❑ Removing and instal‐

ling. Refer to

⇒ “3.2.2 Starter, Re‐

moving and Installing,

Vehicles with DSG

Transmission DQ200–

7F”, page 35

 .

2 - Double Bolt

❑ 80 Nm

3 - Ground Cable
4 - Nut

❑ 20 Nm

5 - Connector
6 - Nut

❑ 20 Nm

7 - Cap
8 - Terminal 30/B+
9 - Bolt

❑ 80 Nm

3.1.3

Overview - Starter, Vehicles with DSG Transmission DQ250-6F

1 - Starter - B-

❑ Removing and instal‐

ling. Refer to

⇒ “3.2.3 Starter, Re‐

moving and Installing,

Vehicles with DSG

Transmission

DQ250-6F”, page 36

 .

2 - Bolt

❑ 40 Nm

3 - Connector
4 - Nut

❑ 20 Nm

5 - Cap
6 - Terminal 30/B+
7 - Nut

❑ 20 Nm

8 - Ground Cable
9 - Double bolt

❑ 40 Nm