|
|
|
TEST TABLE (TEST STEPS 1-16) Test steps 17 - 24 ohm see, see TEST TABLE (TEST STEPS 17-24) Notes on test table z The socket designations of adapter V.A.G 1598/36 are identical to the ABS control module (w/EDL) - z If the readings obtained deviate from the specifications, carry out malfunction repair measure in the right- See z Continuity checks with adapter set V.A.G 1594 A (bridging). z If the measured figures only deviate slightly from the specifications, clean sockets and plugs of the testers VOLTAGE MEASUREMENT (20 V =) Resistance of right front ABS wheel speed sensor -G45- 5 Resistance of left front ABS wheel speed sensor -G47- 6 Resistance of right rear ABS wheel speed sensor -G44- 7 Resistance of rear ABS wheel speed sensor -G46- 8 Voltage signal of right front ABS wheel speed sensor -G45- 9 Voltage signal of left front ABS wheel speed sensor -G47- 10 Voltage signal of right rear ABS wheel speed sensor -G44- 11 Voltage signal of left rear ABS wheel speed sensor -G46- 12 Warning lamp function for ABS warning light -K47- 13 Warning lamp function for warning light for brake system -K118- 14 Warning lamp function for ESP amp -K155- 15 Function of ASR/ESP button -E256- 16 Activation of steering angle sensor -G85- 17 Activation of sensor for transverse acceleration -G200- Activation of sender for 18 Activation of sender 1 for brake booster -G201- 19 Checking data bus wiring 20 Voltage supply for V.A.G 1551, connector T16 -21 Resistance of K wire for self-diagnosis, connector T16 22 Coding bridge 23 Coding bridge 24 Switch to measuring range:
2003 Volkswagen New Beetle GLS 1998-2004 BRAKES On Board Diagnostic (OBD) - New Beetle
|