|
|
|
Content .. 1934 1935 1936 1937 ..
The values of the individual test results must reach the specified value or must be within the min.- and max.- Diagnostic Mode 6 Tests Test-ID 09: Coolant temperature plausibility Test requirements z There must not be any DTCs stored in DTC memory. See DIAGNOSTIC MODE 3: CHECK DTC z Coolant temperature must not be above the maximum of 20 °C. See DIAGNOSTIC MODE 1: CHECK Work procedure z Read readiness code. See READ READINESS CODE . z Let engine run at idle. z Under address word 33, select "Diagnostic mode 6: Check test results of components that are not z Select the "Test -ID 09: Coolant temperature plausibility". z Increase engine speed to approx. 1800 RPM. z Check specified values. Evaluation test-ID 09 Coolant temperature plausibility EVALUATION TEST-ID 09 Test- Component, System Test 09: Coolant temperature plausibility See TEST-ID 09: COOLANT TEMPERATURE PLAUSIBILITY . 10: Start-Stop positions test of quantity adjuster See TEST-ID 10: START-STOP POSITIONS TEST OF QUANTITY ADJUSTER . 11: Fuel temperature plausibility See Test-ID 11: Fuel temperature plausibility . 12: Plausibility test of Manifold Absolute Pressure (MAP)/Barometric Pressure See TEST-ID 12: PLAUSIBILITY TEST OF MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE . Test-ID 09 Specified value: min. max. z Timeframe of diagnostic cycle - 117 or 46 (1) z Temperature change during diagnostic cycle 8 - Temperature at end of diagnostic cycle 57 - (1) Independent of coolant temperature.
2003 Volkswagen New Beetle GLS 1998-2004 ENGINE PERFORMANCE Generic Scan Tool, 1.9L ALH & BEW- New Beetle
|