|
|
|
Removing and installing rear interior light -W45- Note ♦ If the rear interior light -W45- is removed, the anti-theft alarm ♦ The anti-theft alarm ultrasonic sensor -G209- must not be moved from its preset position (up to MY2009). Caution ♦ Switch off ignition and all electrical consumers. (switches, covers, trim), mask off areas where tools ( re‐ moval wedge -VAS 3409- , screwdriver) are used to lever out those components using commercially available masking tape. Removing downwards -arrows- out of rear interior light -W45- . – Press both locking lugs -2- in -direction of arrow A- and remove entire rear interior light -W45- -1- in -direction of arrow B- from moulded headliner. 414 |