|
|
|
– Disconnect DF wire connector -1- and pull off protective cap -2-. – Unscrew B+ wire -arrow- from alternator -C- . Caution Before removing, mark the top side and direction of rotation of the poly V-belt. When installing, ensure correct fitting position and direction of rotation. If the belt is installed in the wrong position or against direction of rotation, the belt will be de‐ stroyed! – Mark direction of rotation of poly V-belt. – Release tension of poly V-belt by swivelling tensioning ele‐ ment in direction of -arrow- using an open-jaw spanner. 118 |