|
|
SSANGYONG Y200 1A-18 ENGINE GENERAL INFORMATION Probable Cause • Faulty fuse. • Faulty spark plug. • Electric leakage at the high tension cable. • Poor connection of the high tension cable or lead wires. • Improper ignition timing. • Faulty ignition coil. • Lock of fuel in the fuel tank. • Dirty or clogged fuel filter. • Clogged fuel pipe. • Malfunction of the fuel pump. • Malfunction of the fuel injector. • The foreign material in the fuel tank. • Poor tightening spark plug. • Cracked cylinder head gasket. • Inadequate the valve clearance. • Leakage of the valve clearance. • Interference of the valve stem. • Low elasticity or damage of the valve spring. • Abnormal interference of pistons and cylinders. • Excessive wear of pistons, rings, or cylinders. • Broken timing belt. • Loosening, damage or leakage of the vacuum hose. • Leakage of intake system. • Refer to above in this page. • Improper ignition timing. • Faulty spark plug. • Electric leakage or poor connection of the high tension Correction • Replace the fuse. • Clean, adjust the plug gap or replace. • Replace the cable. • Replace the cable or wires. • Adjust the ignition timing. • Replace the ignition coil. • Feed the fuel. • Replace the filter. • Clean the fuel pipe. • Replace the fuel pump. • Replace the injector. • Clean the fuel tank. • Tighten to the specified torque. Compression • Replace the gasket. • Adjust the clearance. • Repair the valve. • Replace the valve or the valve guide. • Replace the valve spring. • Replace the piston ring. • Replace the ring or the piston and boring or replace the • Replace the belt. • Connect the hose correctly or replace it. • Replace intake system. • Refer to above in this page. • Adjust the ignition timing. • Adjust or replace the spark plug. • Connect the cable correctly or replace it. Condition GENERAL DIAGNOSIS Malfunction of Hard Starting Malfunction of Lack of Engine Decline of Others Malfunction of Decline of |