|
|
Content .. 1819 1820 1821 1822 ..
RESTRAINT CONTROL SYSTEM 9J1–64 DTC 52 Deployment Event Commanded WARNING: DURING SERVICE PROCEDURES. BE VERY CAREFUL WHEN HANDLING A SENSING AND Step Action Yes No 1 Was the “SRS Diagnostic System Check” performed? Go to Step 2. Go to the “SRS Diagnostic System Check” 2 Ignition switch “OFF.” Have pretensioner assemblies deployed? Replace components and perform inspections as directed in “repairs and inspections required after an accident” in this section clear diagnostic trouble codes Repeat “SRS Diagnostic System Check” Go to Step 3 3 Inspect front of vehicle and undercarriage for sings of impact. Were signs of impact found? Replace components and perform inspections as directed in “Repairs and Inspections Required After An Accident” in this section Clear diagnostic trouble codes Repeat “SRS Diagnostic System Check” Ignition switch “OFF” Replace SDM Reconnect all SRS system components, ensure all components are properly mounted Repeat “SRS Diagnostic System Check” |