|
|
|
Content .. 1754 1755 1756 1757 ..
8F–95 BODY STRUCTURE D Secure one end of a piece of steel piano wire (1) (0.02 607RS002 D Use a pair of needle nose pliers to insert the other end D Secure the other end of the piano wire to another D With the aid of an assistant, carefully move the piano D Clean the remaining adhesive caulking material from 8. Remove windshield upper moulding. D Taking notice of the adhesive tape, and peel the 9. Remove moulding clip. 10. Remove spacer. Installation 1. Install the spacer (1). D Clean the bonding surfaces of both the windshield D When installing the spacers, align the lower side 607RS003 D Be absolutely sure to apply glass primer and body |