|
|
FRONT COIL SPRING AND STRUT FSU-17 < UNIT DISASSEMBLY AND ASSEMBLY > C D F G H I J K L M A B FSU N O P 5. Compress coil spring using a suitable tool (A). WARNING: Make sure that the pawls of the suitable tool are firmly hooked on the coil spring. The suitable tool must be tight- ened alternately so as to not tilt the coil spring. 6. Make sure the coil spring is free between the spring upper seat and the strut. CAUTION: Release the suitable tool while making sure the position of the suitable tool on the coil spring does not move. 11. Remove the Tool from strut. 12. If necessary, remove strut mount bearing (1) from spring upper seat (2), using a Tool (A). CAUTION: Do not disassemble the strut mount bearing unless damage exists. 13. Inspect the components. Refer to ASSEMBLY CAUTION: Do not damage the piston rod when removing components from the front coil spring and strut. CAUTION: When installing Tool (A), wrap a shop cloth around the front coil spring and strut to protect the parts from damage. 2. Secure Tool (A) in a vise. JPEIA0007ZZ Tool number : ST35652000 ( — ) Tool number : KV10106700 ( — ) JPEIA0228ZZ Tool number : ST35652000 JPEIA0006ZZ |