|
|
AV-176 < BASIC INSPECTION > [NAVIGATION] INSPECTION AND ADJUSTMENT INSPECTION AND ADJUSTMENT ADDITIONAL SERVICE WHEN REPLACING AV CONTROL UNIT INFOID:0000000009460000 BEFORE REPLACEMENT When replacing AV control unit, save or print current vehicle specification with CONSULT configuration before replacement. NOTE: If “Before Replace ECU” cannot be used, use the “After Replace ECU” or “Instruction Configuration” after replac- ing AV control unit. AFTER REPLACEMENT CAUTION: When replacing AV control unit, you must perform “After Replace ECU” with CONSULT. • Complete the procedure of “After Replace ECU” in order. • If you set incorrect “After Replace ECU”, incidents might occur. • Configuration is different for each vehicle model. Confirm configuration of each vehicle model. ADDITIONAL SERVICE WHEN REPLACING AV CONTROL UNIT : Work Procedure INFOID:0000000009460001 1. SAVING VEHICLE SPECIFICATION -CONSULT Enter “Re/Programming, Configuration” and perform “Before Replace ECU” to save or print current vehicle specification. NOTE: If “Before Replace ECU” cannot be used, use the “After Replace ECU” or “Instruction Configuration” after replac- ing AV control unit. >> GO TO 2. 2. REPLACE AV CONTROL UNIT Replace AV control unit. Refer to AV-240, "Removal and Installation" >> GO TO 3. 3. WRITING VEHICLE SPECIFICATION CONSULT 1. Enter "Re/Programming, Configuration". 2. If “Before Replace ECU” operation was performed, automatically an "Operation Log Selection" screen will be displayed. Select the applicable file from the "Saved Data List" and press “Confirm” to write vehicle specification. Refer to AV-178, "CONFIGURATION (AV CONTROL UNIT) : Work Procedure" . 3. If “Before Replace ECU” operation was not performed, select "After Replace ECU" or "Instruction Configura- tion" to write vehicle specification. Refer to AV-178, "CONFIGURATION (AV CONTROL UNIT) : Work Pro- >> GO TO 4. 4. OPERATION CHECK Check that the operation of the AV control unit and camera images (fixed guide lines) are normal. >> Work End. ADDITIONAL SERVICE WHEN REPLACING AROUND VIEW MONITOR CON- |