Nissan Versa Sedan. Instruction - part 675

SE-26

< UNIT DISASSEMBLY AND ASSEMBLY >

FRONT SEAT

UNIT DISASSEMBLY AND ASSEMBLY

FRONT SEAT

DRIVER SIDE
DRIVER SIDE : Exploded View

INFOID:0000000009268530

WITH REMOVABLE HEADREST

ALJIA0995ZZ

FRONT SEAT

SE-27

< UNIT DISASSEMBLY AND ASSEMBLY >

C

D

E

F

G

H

I

K

L

M

A

B

SE

N

O

P

1.

Armrest (if equipped)

2.

Seat cushion outer finisher (RH)

3.

Seat belt buckle

4.

Seat cushion trim

5.

Seat cushion pad

6.

Seat cushion frame

7.

Seat cushion outer finisher (LH)

8.

Lift lever (if equipped)

9.

Lift lever cap (if equipped)

10. Recline lever

11. Side air bag module

12. Chute rod

13. Headrest holder (locked)

14. Seat frame assembly

15. Headrest holder (free)

16. Headrest

17. Seatback pad

18. Seatback trim

SE-28

< UNIT DISASSEMBLY AND ASSEMBLY >

FRONT SEAT

WITHOUT REMOVABLE HEADREST

ALJIA0996ZZ

1.

Seat frame assembly

2.

Seat cushion outer finisher (RH)

3.

Seat belt buckle

4.

Seat cushion trim

5.

Seat cushion pad

6.

Seat cushion frame

7.

Seat cushion outer finisher (LH)

8.

Lift lever (if equipped)

9.

Lift lever cap (if equipped)

10. Recline lever

11. Side air bag module

12. Chute rod

13. Seatback pad

14. Seatback trim

FRONT SEAT

SE-29

< UNIT DISASSEMBLY AND ASSEMBLY >

C

D

E

F

G

H

I

K

L

M

A

B

SE

N

O

P

DRIVER SIDE : Disassembly and Assembly

INFOID:0000000009268531

SEATBACK ASSEMBLY

WARNING:

Do not leave any objects (screwdrivers, tools, etc.) on the seat during seatback repair. It can lead to

personal injury if the side air bag should accidentally deploy.

CAUTION:

• Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least three

minutes.

• Handle the side air bag module carefully. During disassembly, always hold the side air bag module,

do not let it hang by the wire harness.

• Always work from the side or back of the seatback assembly, do not work in front of seat.

• Do not use air tools or electric tools for servicing the seat assembly.

• Replace the side air bag module if it has been dropped or sustained an impact.

• Do not insert any objects into the side air bag module.

• Do not attempt to disassemble the side air bag module.

• Do not expose the side air bag module to temperatures exceeding 93

°C (200°F).

• Do not expose the side air bag module to any oil, grease, detergent or water.

• During disassembly, do not damage the seatback board, chutes, connectors, retainers, clips, module

harness or the side air bag module.

NOTE:

If the vehicle has been involved in a collision and the side air bag module has deployed, the front seatback

assembly must be replaced. 

Disassembly

1. Remove the front seat assembly. Refer to 

SE-17, "DRIVER SIDE : Removal and Installation"

.

2. Release the lower seatback trim retainer strap (A) from the seat

cushion frame.

3. Remove the armrest (1) (if equipped).
a. Unzip the armrest to access the armrest bolt (A).
b. Remove the armrest bolt (A) and the armrest (1).

JMJIA6015ZZ

ALJIA0994ZZ