Nissan Versa Sedan. Instruction - part 654

PWC-38

< DTC/CIRCUIT DIAGNOSIS >

DOOR SWITCH

4. Check continuity between BCM connector and ground.

Is the inspection result normal?

YES

>> GO TO 3

NO

>> Repair or replace harness.

3.

 CHECK BCM OUTPUT SIGNAL

1. Connect BCM connector.

2. Check voltage between BCM connector and ground.

Is the measurement value within the specification?

YES

>> GO TO 4

NO

>> Replace BCM. Refer to 

BCS-69, "Removal and Installation"

 or 

BCS-122, "Removal and Installa-

tion"

.

4.

 CHECK FRONT DOOR SWITCH

Check front door switch.

Refer to 

PWC-39, "Component Inspection"

.

Is the inspection result normal?

YES

>> Check intermittent incident. Refer to 

GI-45, "Intermittent Incident"

.

NO

>> Replace front door switch. 

BCM connector

Terminal

Front door switch

 connector

Terminal

Continuity

M18 (without Intelligent 

Key system)

12

RH: B16

3

Yes

M19 (without Intelligent 

Key system)

47

LH: B8

M100 (with Intelligent Key 

system)

45

RH: B16

M100 (with Intelligent Key 

system)

47

LH: B8

BCM connector

Terminal

Ground

Continuity

M18 (without Intelligent Key sys-

tem)

12

No

M19 (without Intelligent Key sys-

tem)

47

M100 (with Intelligent Key system)

45

M100 (with Intelligent Key system)

47

Terminal

Voltage (V)

(Approx.)

(+)

(–)

BCM connector

Terminal 

M18 (without Intelligent Key 

system)

12

Ground

Battery voltage

M19 (without Intelligent Key 

system)

47

M100 (with Intelligent Key sys-

tem)

45

M100 (with Intelligent Key sys-

tem)

47

DOOR SWITCH

PWC-39

< DTC/CIRCUIT DIAGNOSIS >

C

D

E

F

G

H

I

J

L

M

A

B

PWC

N

O

P

Component Inspection

INFOID:0000000009541440

1.

 CHECK FRONT DOOR SWITCH

Check front door switches.

Is the inspection result normal?

YES

>> Front door switch is OK.

NO

>> Replace front door switch.

Terminal

Door switch

Continuity

Door switches

3

Ground part of 

door switch

Pressed

No

Released

Yes

PWC-40

< SYMPTOM DIAGNOSIS >

POWER WINDOW CONTROL SYSTEM SYMPTOMS

SYMPTOM DIAGNOSIS

POWER WINDOW CONTROL SYSTEM SYMPTOMS

Symptom Table

INFOID:0000000009269441

Symptom

Reference page

None of the power windows can be operated using any switch.

Refer to 

PWC-41, "Diagnosis Procedure"

.

Driver side power window does not operate.

Refer to 

PWC-42, "Diagnosis Procedure"

.

Front passenger side power window does not operate (When both power window main 
switch and front power window switch are operated).

Refer to 

PWC-43, "WHEN BOTH POWER 

WINDOW MAIN SWITCH AND FRONT POW-
ER WINDOW SWITCH ARE OPERATED : Di-
agnosis Procedure"

.

Front passenger side power window does not operate (when front power window 
switch RH is operated).

Refer to 

PWC-43, "WHEN FRONT POWER 

WINDOW SWITCH (PASSENGER SIDE) IS 
OPERATED : Diagnosis Procedure"

.

Front passenger side power window does not operate (when power window switch 
main is operated).

Refer to 

PWC-44, "WHEN POWER WINDOW 

MAIN SWITCH IS OPERATED : Diagnosis 
Procedure"

.

Rear (LH) side power window does not operate (when both power window main switch 
and rear power window switch LH are operated).

Refer to 

PWC-45, "WHEN BOTH POWER 

WINDOW MAIN SWITCH AND REAR POW-
ER WINDOW SWITCH LH ARE OPERATED : 
Diagnosis Procedure"

.

Rear (LH) side power window does not operate (when rear power window switch LH 
is operated).

Refer to 

PWC-45, "WHEN REAR POWER 

WINDOW SWITCH LH IS OPERATED : Diag-
nosis Procedure"

.

Rear (LH) side power window does not operate (when power window main switch is 
operated).

Refer to 

PWC-46, "WHEN POWER WINDOW 

MAIN SWITCH IS OPERATED : Diagnosis 
Procedure"

.

Rear (RH) side power window does not operate (when both power window main switch 
and rear power window switch RH are operated).

Refer to 

PWC-47, "WHEN BOTH POWER 

WINDOW MAIN SWITCH AND REAR POW-
ER WINDOW SWITCH RH ARE OPERATED 
: Diagnosis Procedure"

.

Rear (RH) side power window does not operate (when rear power window switch RH 
is operated).

Refer to 

PWC-47, "WHEN REAR POWER 

WINDOW SWITCH RH IS OPERATED : Diag-
nosis Procedure"

.

Rear (RH) side power window does not operate (when power window main switch is 
operated)

Refer to 

PWC-48, "WHEN POWER WINDOW 

MAIN SWITCH IS OPERATED : Diagnosis 
Procedure"

.

Power window lock switch does not function.

Refer to 

PWC-51, "Diagnosis Procedure"

.

NONE OF THE POWER WINDOWS CAN BE OPERATED USING ANY SWITCH

PWC-41

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

J

L

M

A

B

PWC

N

O

P

NONE OF THE POWER WINDOWS CAN BE OPERATED USING ANY
SWITCH

Diagnosis Procedure

INFOID:0000000009269442

1.

CHECK BCM POWER SUPPLY AND GROUND CIRCUIT

Check BCM power supply and ground circuit. Refer to 

PWC-23, "BCM (BODY CONTROL SYSTEM) (WITH

INTELLIGENT KEY SYSTEM) : Diagnosis Procedure"

 (with Intelligent Key system) or 

PWC-23, "BCM (BODY

CONTROL SYSTEM) (WITHOUT INTELLIGENT KEY SYSTEM) : Diagnosis Procedure"

 (without Intelligent

Key system).
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK POWER WINDOW MAIN SWITCH POWER SUPPLY AND GROUND CIRCUIT

Check power window main switch power supply and ground circuit.

Refer to 

PWC-24, "POWER WINDOW MAIN SWITCH : Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-45, "Intermittent Incident"

.

NO

>> GO TO 1.