Nissan Versa Sedan. Instruction - part 590
MWI
COMPONENT PARTS
MWI-59
< SYSTEM DESCRIPTION >
[TYPE B]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Component Description
INFOID:0000000009266499
1.
ABS actuator and electric unit (control
unit)
2.
Combination meter
3.
CVT shift selector (O/D OFF switch)
4.
Air bag diagnosis sensor unit
(view with center console removed)
5.
Parking brake switch
(view with center console removed)
6.
Fuel level sensor unit and fuel pump
(view with rear seat and access cover
removed)
7.
Seat belt buckle switch LH
8.
Front door switch LH
9.
BCM
(view with instrument panel removed)
10. EPS control unit
(view with instrument lower panel re-
moved)
11. Brake fluid level switch
(view with IPDM E/R removed)
12. ECM
(view with IPDM E/R removed)
13. TCM
14. Oil pressure sensor
15. Washer fluid level switch (if equipped)
(view with front fascia removed)
Unit
Description
Combination meter
The combination meter controls the following items according to the signals received from each unit.
• Speedometer
• Engine coolant temperature gauge
• Warning lamps
• Information display
• Tachometer
• Fuel gauge
• Indicator lamps
• Warning chime
• Illumination control
CVT shift selector switch
Transmits the overdrive off switch signal to the combination meter.
Seat belt buckle switch (LH)
Transmits the seat belt buckle switch (LH) signal to the combination meter.
ABS actuator and electric unit
(control unit)
Transmits the vehicle speed signal to the combination meter via CAN communication.
Air bag diagnosis sensor unit
Transmits the air bag signal and seat belt buckle switch (RH) signal to the combination meter.
EPS Control unit
Transmits the EPS signal to the combination meter via CAN communication.
TCM
Transmits the shift position signal to the combination meter via CAN communication.
ECM
Transmits the following signals to the combination meter via CAN communication.
• Engine speed signal
• Engine coolant temperature signal
• Fuel consumption monitor signal
• Oil pressure sensor signal
BCM
Transmits the security signal to the combination meter.
Transmits the following signals to the combination meter via CAN communication.
• Low tire pressure warning signal
• Door open switch signal
Washer fluid level switch (if
equipped)
Transmits the washer fluid level switch signal to the combination meter.
Fuel level sensor unit and fuel
pump
Transmits the fuel level sensor signal to the combination meter.
Parking brake switch
Transmits the parking brake switch signal to the combination meter.
Brake fluid level switch
Transmits the brake fluid level switch signal to the combination meter.
Oil pressure sensor
Transmits the oil pressure sensor signal to the ECM.