Nissan X-Trail 32. Instruction - part 2022

TM-46

< UNIT DISASSEMBLY AND ASSEMBLY >

[6MT: RS6F94R]

TRANSAXLE ASSEMBLY

SHIFT FORK AND FORK ROD

Reverse output gear

Snap ring

Reverse baulk ring

Return spring

Needle bearing

Seal washer

Reverse idler shaft

Spacer

Reverse input gear

Lock washer

Spring washer

: N·m (kg-m, ft-lb)

: Always replace after every disassembly.

: Replace the parts as a set.

JPDIC0425GB

TRANSAXLE ASSEMBLY

TM-47

< UNIT DISASSEMBLY AND ASSEMBLY >

[6MT: RS6F94R]

C

E

F

G

H

I

J

K

L

M

A

B

TM

N

O

P

FINAL DRIVE

Shift lever (outer)

Shift lever (inner) 

Retaining pin

Selector 

Select lever

Reverse fork rod

1st-2nd fork rod

Fork rod

: Always replace after every disassembly.

: Replace the parts as a set.

JSDIA5985ZZ

TM-48

< UNIT DISASSEMBLY AND ASSEMBLY >

[6MT: RS6F94R]

TRANSAXLE ASSEMBLY

Disassembly and Assembly

INFOID:0000000010842463

DISASSEMBLY

1.

Remove drain plug and gasket from clutch housing, then drain gear oil.

2.

Remove filler plug and gasket from transaxle case.

3.

Remove retaining pin with a pin punch to remove select lever 

.

Shim

Differential side bearing outer race 
(transaxle case side)

Differential side bearing inner race 
(transaxle case side)

Final gear

Differential assembly

Differential side bearing inner race 
(clutch housing side)

Differential side bearing outer race 
(clutch housing side)

: N·m (kg-m, ft-lb)

: Replace the parts as a set.

JSDIA5987GB

JSDIA6129ZZ

TRANSAXLE ASSEMBLY

TM-49

< UNIT DISASSEMBLY AND ASSEMBLY >

[6MT: RS6F94R]

C

E

F

G

H

I

J

K

L

M

A

B

TM

N

O

P

4.

Remove bracket 

 and position switch 

 from transaxle case.

5.

Remove transaxle case mounting bolts (

).

6.

Remove reverse idler shaft mounting bolt (

) and seal washer.

7.

Remove transaxle case 

 while rotating shift lever (outer) 

 in

the direction as shown in the figure.

8.

Remove selector spring 

 from return bushing 

.

JSDIA6130ZZ

PCIB1694E

PCIB1695E

JPDIC0444ZZ

JPDIC0445ZZ