|
|
|
8-10 Maintenance and do-it-yourself SDI2045 CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operat- ing temperature. 3. Turn off the engine. Wait more than 15 minutes for the oil to drain back into 4. Remove the dipstick and wipe it clean. Reinsert it all the way. 5. Remove the dipstick again and check the oil level. It should be within the * 1 . If the oil level is below * 2 , remove the oil filler cap and pour recommended oil through the opening. * 3 . 6. Recheck oil level with the dipstick. It is normal to add some oil between oil CAUTION Oil level should be checked regularly. CHANGING ENGINE OIL AND FILTER Vehicle set-up 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operat- ing temperature. 3. Turn the engine off and wait more than 15 minutes. 4. Raise and support the vehicle using a suitable floor jack and safety jack . Place the safety jack stands under . A suitable adapter should be at- 5. Remove the plastic engine undercover. a. Remove the small plastic clip at the center point of the undercover. b. Then remove the other bolts that hold the undercover in place. CAUTION Make sure the correct lifting and support ENGINE OIL |