|
|
|
TEST ACTION APPLICABILITY 4 Turn the ignition off to the lock position. t Switch harness connector. Note: Check connectors - Clean/repair as necessary. t Switch harness connector. Is the resistance above 5.0 ohms? All Yes → Repair the AutoStickt Downshift Sense circuit for an open. No → Go To 5 5 Ignition on, engine not running. t monitor the AutoStickt Switch status. Firmly apply the brake and shift into AutoStick t. Push the shift lever to the right several times to actuate the AutoStick t Upshift Switch and then to the left several times to actuate the AutoStick t Downshift Switch. Do both AutoStick t Upshift and Downshift Switch states toggle? All Yes → Test Complete. No → Replace the Powertrain Control Module per the Service Informa- tion. WITH THE DRBIII t PERFORM QUICK LEARN AND REPROGRAM PINION FACTOR. 307 TRANSMISSION - NGC *NO MANUAL AUTOSTICK OPERATION — Continued |