|
|
|
TEST ACTION APPLICABILITY 8 Disconnect the Sliding Door Motor connector. All Yes → Go To 9 No → Repair the Door Motor Hall Effect Signal wire for an open. Perform BODY VERIFICATION TEST - VER 1. 9 Disconnect the Sliding Door Motor connector. All Yes → Repair the Door Motor Hall Effect Signal wire for a short to ground. No → Go To 10 10 If there are no possible causes remaining, view repair. All Repair Replace the Power Sliding Door Motor Assembly (hall effect 899 POWER DOORS - SLIDING INCOMPLETE POWER OPEN - EXCESSIVE HALL EFFECT SIGNAL — Continued |