|
|
|
Symptom: LEFT MIRROR HORIZONTAL SENSOR OUT OF RANGE LOW When Monitored and Set Condition: LEFT MIRROR HORIZONTAL SENSOR OUT OF RANGE LOW When Monitored: Continuously when the PCI bus is active. Set Condition: This code is set when the mirror sensor feedback to the MSMM is less than the mirror out of range low value stored in EEPROM. Code will remain for 50 ignition POSSIBLE CAUSES MSMM HORIZONTAL POSITION LOW STORED DIAGNOSTIC TROUBLE CODE LEFT MIRROR HORIZONTAL POSITION SIGNAL WIRE SHORT TO GROUND LEFT POWER MIRROR TEST ACTION APPLICABILITY 1 With the DRBIII t, erase the DTC from Memory Seat Mirror Module. Operate the driver’s power seat and memory system. All Yes → Go To 2 No → Using the wiring diagram/schematic as a guide, inspect the wiring and connectors for an intermittent condition. 2 Turn the ignition off. All Yes → Replace the Left Power Mirror. Perform MEMORY SYSTEM VERIFICATION TEST - VER 1. No → Go To 3 695 MEMORY SEAT |