RAM 3500 (2019 year). Instruction - part 11

 

  Index      RAM     RAM 3500 (2019 year) - instruction in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     9      10      11      12     ..

 

 

RAM 3500 (2019 year). Instruction - part 11

 

 

GETTING TO KNOW YOUR INSTRUMENT PANEL

173

Upper Left
• None
• Compass (Default Setting) — If Equipped
• Outside Temp — If Equipped
• Time
• Range To Empty
• Average MPG
• Current MPG
• Trip A Distance
• Trip B Distance
• Trailer Trip — If Equipped
• Trailer Brake — If Equipped
• Oil Pressure — If Equipped
• Coolant Temperature — If Equipped
• Oil Temperature — If Equipped
• Battery Voltage — If Equipped
• Transmission Temperature — If Equipped
• Oil Life — If Equipped

• Exhaust Brake — If Equipped
• Turbo Boost — If Equipped
• Fuel Filter Life — If Equipped
Upper Center
• None
• Compass
• Outside Temp
• Time
• Range To Empty
• Average MPG
• Current MPG
• Trip A Distance
• Trip B Distance
• Trailer Trip
• Audio
• Speedometer (Default Setting)
• Menu Title

3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

174 GETTING TO KNOW YOUR INSTRUMENT PANEL

Upper Right
• None
• Compass — If Equipped
• Outside Temp (Default Setting) — If Equipped
• Time
• Range To Empty
• Average MPG
• Current MPG
• Trip A Distance
• Trip B Distance
• Trailer Trip — If Equipped
• Trailer Brake — If Equipped
• Oil Pressure — If Equipped
• Coolant Temperature — If Equipped
• Oil Temperature — If Equipped
• Battery Voltage — If Equipped

• Transmission Temperature — If Equipped
• Oil Life — If Equipped
• Exhaust Brake — If Equipped
• Turbo Boost — If Equipped
• Fuel Filter Life — If Equipped
Left Side — If Equipped
• None
• Range
• Average MPG
• Menu Icon (Default Setting)
• Coolant Temperature
• Oil Temperature
• Transmission Temperature
• Oil Life
• Fuel Filter Life — If Equipped

-------------------------------------------------------------------------------------------------------------------------------------------------------------

GETTING TO KNOW YOUR INSTRUMENT PANEL

175

Right Side — If Equipped
• None
• Range (Default Setting)
• Average MPG
• Menu Icon
• Coolant Temperature
• Oil Temperature
• Transmission Temperature
• Oil Life
• Fuel Filter Life — If Equipped
Lower Left — If Equipped
• None
• Compass
• Outside Temp
• Time
• Range To Empty

• Average MPG
• Current MPG
• Trip A Distance
• Trip B Distance
• Trailer Trip
• Trailer Brake
• Oil Pressure
• Coolant Temperature
• Oil Temperature
• Battery Voltage (Default Setting)
• Transmission Temperature
• Oil Life
• Exhaust Brake — If Equipped
• Turbo Boost — If Equipped
• Fuel Filter Life — If Equipped

3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

176 GETTING TO KNOW YOUR INSTRUMENT PANEL

Lower Right — If Equipped
• None
• Compass
• Outside Temp
• Time
• Range To Empty
• Average MPG
• Current MPG
• Trip A Distance
• Trip B Distance
• Trailer Trip
• Trailer Brake
• Oil Pressure (Default Setting)

• Coolant Temperature
• Oil Temperature
• Battery Voltage
• Transmission Temperature
• Oil Life
• Exhaust Brake — If Equipped
• Turbo Boost — If Equipped
• Fuel Filter Life — If Equipped
Restore Defaults
• Cancel (Default Setting)
• Ok

-------------------------------------------------------------------------------------------------------------------------------------------------------------

GETTING TO KNOW YOUR INSTRUMENT PANEL

177

Commercial Settings — If Equipped

Commercial Settings allows the driver to set and recall addi-

tional features when the transmission is in PARK.
Push and release the up and down button until Commercial

Settings displays in the instrument cluster display.
Follow the prompts to enter the required PIN and enter the

Commercial Settings submenu.
Commercial  Settings  allows  you  to  access  the  following

features:
• PTO — If Equipped
• Remote Ignition
• Idle Control
• Backup Alarm
• Commercial ParkSense — If Equipped
• Aux Switches
• PIN Setup
NOTE:

If the vehicle’s PIN is forgotten or not known, see an autho-

rized dealer to have the PIN reset.

Battery Saver On/Battery Saver Mode Message — 
Electrical Load Reduction Actions — If Equipped   

This vehicle is equipped with an Intelligent Battery Sensor

(IBS)  to  perform  additional  monitoring  of  the  electrical

system and status of the vehicle battery.
In cases when the IBS detects charging system failure, or the

vehicle battery  conditions  are  deteriorating, electrical  load

reduction actions will take place to extend the driving time

and distance of the vehicle. This is done by reducing power

to or turning off non-essential electrical loads.
Load reduction is only active when the engine is running. It

will display a message if there is a risk of battery depletion to

the point where the vehicle may stall due to lack of electrical

supply, or will not restart after the current drive cycle.
When  load  reduction  is  activated,  the  message  “Battery

Saver  On  Some  Systems  May  Have  Reduced  Power”  will

appear in the instrument cluster.
These messages indicate the vehicle battery has a low state of

charge and continues to lose electrical charge at a rate that

the charging system cannot sustain.

3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

178 GETTING TO KNOW YOUR INSTRUMENT PANEL

NOTE:
• The charging system is independent from load reduction.

The  charging  system  performs  a  diagnostic  on  the

charging system continuously.

• If the Battery Charge Warning Light is on it may indicate a

problem  with  the  charging  system.  Refer  to  “Battery

Charge Warning Light” in “Getting To Know Your Instru-

ment Panel” for further information.

The electrical loads that may be switched off (if equipped), and

vehicle functions which can be affected by load reduction:
• Heated Seats/Vented Seats/Heated Wheel
• Rear Defroster And Heated Mirrors
• HVAC System
• 115V AC Power Inverter System
• Audio and Telematics System
Loss of the battery charge may indicate one or more of the

following conditions:
• The  charging  system  cannot  deliver  enough  electrical

power to the vehicle system because the electrical loads are

larger than the capability of charging system. The charging

system is still functioning properly.

• Turning on all possible vehicle electrical loads (e.g. HVAC

to  max  settings,  exterior  and  interior  lights,  overloaded

power outlets +12V, 115V AC, USB ports) during certain

driving  conditions  (city  driving,  towing,  frequent  stop-

ping).

• Installing options like additional lights, upfitter electrical

accessories, audio systems, alarms and similar devices.

• Unusual  driving  cycles  (short  trips  separated  by  long

parking periods).

• The  vehicle  was  parked  for  an  extended  period  of  time

(weeks, months).

• The  battery  was  recently  replaced  and  was not  charged

completely.

• The  battery was discharged by an  electrical  load left on

when the vehicle was parked.

• The  battery  was  used  for  an  extended  period  with  the

engine not running to supply radio, lights, chargers, +12V

portable appliances like vacuum cleaners, game consoles

and similar devices.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

GETTING TO KNOW YOUR INSTRUMENT PANEL

179

What  to  do  when  an  electrical  load  reduction  action

message is present (“Battery Saver On” or “Battery Saver

Mode”)
During a trip:
• Reduce power to unnecessary loads if possible:

•Turn off redundant lights (interior or exterior).

•Check what may be plugged in to power outlets +12V,

115V AC, USB ports.

•Check HVAC settings (blower, temperature).

•Check the audio settings (volume).

After a trip:
• Check if any aftermarket equipment was installed (addi-

tional lights, upfitter electrical accessories, audio systems,

alarms) and review specifications if any (load and Ignition

Off Draw currents).

• Evaluate the latest driving cycles (distance, driving time

and parking time).

• The vehicle should have service performed if the message

is still present during consecutive trips and the evaluation

of the vehicle and driving pattern did not help to identify

the cause.

WARNING LIGHTS AND MESSAGES

The warning/indicator lights will illuminate in the instru-

ment  panel  together  with  a  dedicated  message  and/or

acoustic signal when applicable. These indications are indic-

ative and precautionary and as such must not be considered

as exhaustive. Always refer to the information in this chapter

in the event of a failure indication. All  active telltales will

display  first  if  applicable.  The  system  check  menu  may

appear different based upon equipment options and current

vehicle  status.  Some  telltales  are  optional  and  may  not

appear.

Red Warning Lights

 — Seat Belt Reminder Warning Light 

This warning light indicates when the driver or passenger

seat belt is unbuckled. When the ignition is first placed in the

ON/RUN  or  ACC/ON/RUN  position  and  if  the  driver’s

seat belt is unbuckled, a chime will sound and the light will

turn on. When driving, if the driver or front passenger seat

belt remains unbuckled, the Seat Belt Reminder Light will

flash or remain on continuously and a chime will sound.
Refer  to  “Occupant  Restraint  Systems”  in  “Safety”  for

further information.

3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

180 GETTING TO KNOW YOUR INSTRUMENT PANEL

 — Air Bag Warning Light 

This warning light will illuminate to indicate a fault with the

air bag, and will turn on for four to eight seconds as a bulb

check when the ignition is placed in the ON/RUN or ACC/

ON/RUN position. This light will illuminate with a single

chime when a fault with the air bag has been detected, it will

stay on until the fault is cleared. If the light is either not on

during startup, stays on, or turns on while driving, have the

system inspected at an authorized dealer as soon as possible.

 — Brake Warning Light 

This  warning  light  monitors  various  brake  functions,

including brake fluid level and parking brake application. If

the  brake  light  turns  on  it  may  indicate  that  the  parking

brake is applied, that the brake fluid level is low, or that there

is a problem with the anti-lock brake system reservoir.
If  the  light  remains  on  when  the  parking  brake  has  been

disengaged,  and  the  fluid  level  is  at  the  full  mark  on  the

master  cylinder  reservoir,  it  indicates  a  possible  brake

hydraulic  system  malfunction  or  that  a  problem  with  the

Brake  Booster  has  been  detected  by  the  Anti-Lock  Brake

System (ABS) / Electronic Stability Control (ESC) system. In

this case, the light will remain on until the condition has been

corrected. If the problem is related to the brake booster, the

ABS pump will run when applying the brake, and a brake

pedal pulsation may be felt during each stop.
The dual brake system provides a reserve braking capacity in

the event of a failure to a portion of the hydraulic system. A

leak in either half of the dual brake system is indicated by the

Brake  Warning  Light,  which  will  turn  on  when  the  brake

fluid level in the master cylinder has dropped below a spec-

ified level.
The light will remain on until the cause is corrected.
NOTE:

The  light  may  flash  momentarily  during  sharp  cornering

maneuvers, which change fluid level conditions. The vehicle

should  have  service  performed,  and  the  brake  fluid  level

checked.
If brake failure is indicated, immediate repair is necessary.

WARNING!

Driving  a  vehicle  with  the  red  brake  light  on  is

dangerous. Part of the brake system may have failed. It

will  take  longer  to  stop  the  vehicle.  You  could  have  a

collision. Have the vehicle checked immediately.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

GETTING TO KNOW YOUR INSTRUMENT PANEL

181

Vehicles equipped with the Anti-Lock Brake System (ABS)

are also equipped with Electronic Brake Force Distribution

(EBD).  In  the  event  of  an  EBD  failure,  the  Brake Warning

Light  will  turn  on  along  with  the  ABS  Light.  Immediate

repair to the ABS system is required.
Operation  of  the  Brake  Warning  Light  can  be  checked  by

turning the ignition switch from the OFF position to the ON/

RUN position. The light should illuminate for approximately

two  seconds.  The  light  should  then  turn  off  unless  the

parking brake is applied or a brake fault is detected. If the

light  does  not  illuminate,  have  the  light  inspected  by  an

authorized dealer.
The light also will turn on when the parking brake is applied

with the ignition switch in the ON/RUN position.
NOTE:

This light shows only that the parking brake is applied. It

does not show the degree of brake application.

 — Hood Open Warning Light

This  warning light will illuminate when  the  hood  is ajar/

open and not fully closed.
NOTE:

If the vehicle is moving, there will also be a single chime.

 — Vehicle Security Warning Light — If Equipped  

This light will flash at a fast rate for approximately 15 seconds

when the vehicle security alarm is arming, and then will flash

slowly until the vehicle is disarmed.

 — Engine Coolant Temperature Warning Light 

This warning light warns of an overheated engine condition.

If the engine coolant temperature is too high, this indicator

will illuminate and a single chime will sound. If the tempera-

ture reaches the upper limit, a continuous chime will sound

for four minutes or until the engine is able to cool: whichever

comes first.
If the light turns on while driving, safely pull over and stop

the vehicle. If the A/C system is on, turn it off. Also, shift the

transmission  into  NEUTRAL  and  idle  the  vehicle.  If  the

temperature  reading  does  not  return  to  normal,  turn  the

engine off immediately and call for service.
Refer to “If Your Engine Overheats” in “In Case Of Emer-

gency” for further information.

3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

182 GETTING TO KNOW YOUR INSTRUMENT PANEL

 — Battery Charge Warning Light 

This warning light  will illuminate when the battery is not

charging properly. If it stays on while the engine is running,

there  may  be  a  malfunction  with  the  charging  system.

Contact an authorized dealer as soon as possible.
This indicates a possible problem with the electrical system

or a related component.

 — Oil Pressure Warning Light  

This warning light will illuminate to indicate low engine oil

pressure. If the light turns on while driving, stop the vehicle,

shut off the engine as soon as possible, and contact an autho-

rized dealer. A chime will sound when this light turns on.
Do not operate the vehicle until the cause is corrected. This

light does not indicate how much oil is in the engine. The

engine oil level must be checked under the hood.

 — Oil Temperature Warning Light

This warning light will illuminate to indicate the engine oil

temperature is high. If the light turns on while driving, stop

the vehicle and shut off the engine as soon as possible. Wait

for oil temperature to return to normal levels.

 — Electronic Throttle Control (ETC) Warning Light 

This warning light will illuminate to indicate a problem with

the Electronic Throttle Control (ETC) system. If a problem is

detected  while the  vehicle is running,  the light  will  either

stay  on  or  flash  depending  on  the  nature  of  the  problem.

Cycle the ignition when the vehicle is safely and completely

stopped and the transmission is placed in the PARK position.

The light should turn off.  If the light remains on with the

vehicle  running,  your  vehicle  will  usually  be  drivable;

however,  see  an  authorized  dealer  for  service  as  soon  as

possible.
NOTE:

This light may turn on if the accelerator and brake pedals are

pressed at the same time.
If the light continues to flash when the vehicle is running,

immediate  service  is  required  and  you  may  experience

reduced  performance,  an  elevated/rough  idle,  or  engine

stall  and  your  vehicle  may  require  towing.  The  light  will

come  on  when  the  ignition  is  placed  in  the  ON/RUN  or

ACC/ON/RUN  position  and  remain  on  briefly  as  a  bulb

check. If the light does not come on during starting, have the

system checked by an authorized dealer.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

GETTING TO KNOW YOUR INSTRUMENT PANEL

183

 — Electric Power Steering Fault Warning Light

This warning light will turn on when there's a fault with the

EPS  (Electric  Power  Steering)  system.  Refer  to  “Power

Steering” in “Starting And Operating” for further informa-

tion.

 — Trailer Brake Disconnected Warning Light

This warning light will illuminate when the Trailer Brake has

been disconnected.

 — Transmission Temperature Warning Light — If 

Equipped

This warning light will illuminate to warn of a high transmis-

sion fluid temperature. This may occur with strenuous usage

such as trailer towing. If this light turns on, stop the vehicle

and run the engine at idle or slightly faster, with the trans-

mission  in  PARK  or  NEUTRAL,  until  the  light  turns  off.

Once the light turns off, you may continue to drive normally.

 — Door Open Warning Light  

This indicator will illuminate when a door is ajar/open and

not fully closed.
NOTE:

If the vehicle is moving there will also be a single chime.

WARNING!

Continued  operation  with  reduced  assist  could  pose  a

safety  risk  to  yourself  and  others.  Service  should  be

obtained as soon as possible. 

WARNING!

  If  you  continue  operating  the  vehicle  when  the

Transmission Temperature Warning Light is illuminated

you  could cause  the fluid to boil over, come in contact

with hot engine or exhaust components and cause a fire. 

CAUTION!

 Continuous driving with the Transmission Temperature

Warning Light illuminated will eventually cause severe

transmission damage or transmission failure. 

3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

184 GETTING TO KNOW YOUR INSTRUMENT PANEL

Yellow Warning Lights

 — Adaptive Cruise Control (ACC) Fault Warning Light 

— If Equipped

This warning light will illuminate to indicate a fault in the

ACC system. Contact a local authorized dealer for service.
For further information, refer to “Adaptive Cruise Control

(ACC)” in “Starting And Operating.”

 — Air Suspension Fault Warning Light — If Equipped

This light will illuminate when a fault is detected with the air

suspension system.

 — Engine Check/Malfunction Indicator Warning Light 

(MIL) 

The  Engine  Check/Malfunction Indicator  Light  (MIL)  is  a

part  of  an  Onboard  Diagnostic  System  called  OBD  II  that

monitors  engine  and  automatic  transmission  control

systems. This warning light will illuminate when the ignition

is in the ON/RUN position before engine start. If the bulb

does not come on when turning the ignition switch from OFF

to ON/RUN, have the condition checked promptly.

Certain conditions, such as a loose or missing gas cap, poor

quality fuel, etc., may illuminate the light after engine start.

The vehicle should be serviced if the light stays on through

several typical driving styles. In most situations, the vehicle

will drive normally and will not require towing.
When  the  engine  is  running,  the  MIL  may  flash  to  alert

serious  conditions  that  could  lead  to  immediate  loss  of

power  or  severe  catalytic  converter  damage.  The  vehicle

should  be  serviced  by  an  authorized  dealer  as  soon  as

possible if this occurs.

WARNING!

A  malfunctioning  catalytic  converter,  as  referenced

above,  can  reach  higher  temperatures  than  in  normal

operating conditions. This can cause a fire if you drive

slowly  or  park  over  flammable  substances  such  as  dry

plants, wood, cardboard, etc. This could result in death

or serious injury to the driver, occupants or others.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

GETTING TO KNOW YOUR INSTRUMENT PANEL

185

 — Electronic Stability Control (ESC) Active Warning 

Light — If Equipped

This warning light will indicate when the Electronic Stability

Control system is Active. The “ESC Indicator Light” in the

instrument cluster will come on when the ignition is placed

in the ON/RUN or ACC/ON/RUN position, and when ESC

is activated. It should go out with the engine running. If the

“ESC  Indicator  Light”  comes  on  continuously  with  the

engine running, a malfunction has been detected in the ESC

system. If this warning light remains on after several ignition

cycles, and the vehicle has been driven several miles (kilome-

ters) at speeds greater than 30 mph (48 km/h), see an autho-

rized  dealer  as  soon  as  possible  to  have  the  problem

diagnosed and corrected.

• The  “ESC  Off  Indicator  Light”  and  the  “ESC  Indicator

Light”  come  on  momentarily  each  time  the  ignition  is

placed in the ON/RUN or ACC/ON/RUN position.

• The  ESC  system  will  make  buzzing  or  clicking  sounds

when it is active. This is normal; the sounds will stop when

ESC becomes inactive.

• This light will come on when the vehicle is in an ESC event.

 — Electronic Stability Control (ESC) Off Warning 

Light — If Equipped 

This warning light indicates the Electronic Stability Control

(ESC) is off.
Each time the ignition is turned to ON/RUN or ACC/ON/

RUN, the ESC system will be on, even if it was turned off

previously.

 — Low Washer Fluid Warning Light — If Equipped

This  warning  light  will  illuminate  when  the  windshield

washer fluid is low.

CAUTION!

Prolonged driving with the Malfunction Indicator Light

(MIL)  on  could  cause  damage  to  the  vehicle  control

system.  It  also  could  affect  fuel  economy  and

driveability.  If  the  MIL  is  flashing,  severe  catalytic

converter  damage  and  power  loss  will  soon  occur.

Immediate service is required.

3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

186 GETTING TO KNOW YOUR INSTRUMENT PANEL

 — Low Fuel Warning Light 

When the fuel level reaches approximately 3.2 gal (12 L) this

light will turn on, and remain on until fuel is added.
A single warning chime will sound with Low Fuel Warning.

 — Low Coolant Level Warning Light

This telltale will turn on to indicate the vehicle coolant level

is low.

 — Tire Pressure Monitoring System (TPMS) Warning 

Light 

The warning light switches on and a message is displayed to

indicate  that  the  tire  pressure  is  lower  than  the  recom-

mended value and/or that slow pressure loss is occurring. In

these cases, optimal tire duration and fuel consumption may

not be guaranteed.
Should  one  or  more  tires  be  in  the  condition  mentioned

above, the display will show the indications corresponding

to each tire.

Each tire, including the spare (if provided), should be checked

monthly when cold and inflated to the inflation pressure recom-

mended by the vehicle manufacturer on the vehicle placard or

tire  inflation  pressure  label.  (If  your  vehicle  has  tires  of  a

different size than the size indicated on the vehicle placard or

tire inflation pressure label, you should determine the proper

tire inflation pressure for those tires.)
As an added safety feature, your vehicle has been equipped

with a Tire Pressure Monitoring System (TPMS) that illumi-

nates a low tire pressure telltale when one or more of your

tires is significantly under-inflated. Accordingly, when the

low tire pressure telltale illuminates, you should stop and

check your tires as soon as possible, and inflate them to the

proper  pressure.  Driving  on  a  significantly  under-inflated

tire causes the tire to overheat and can lead to tire failure.

CAUTION!

Do  not  continue  driving  with  one  or  more  flat  tires  as

handling  may  be  compromised.  Stop  the  vehicle,

avoiding sharp  braking  and steering.  If  a  tire  puncture

occurs,  repair  immediately  using  the  dedicated  tire

repair  kit  and  contact  an  authorized  dealer  as  soon  as

possible.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

GETTING TO KNOW YOUR INSTRUMENT PANEL

187

Under-inflation  also  reduces  fuel  efficiency  and  tire  tread

life,  and  may  affect  the  vehicle’s  handling  and  stopping

ability.
Please note that the TPMS is not a substitute for proper tire

maintenance, and it is the driver’s responsibility to maintain

correct tire pressure, even if under-inflation has not reached

the level to trigger illumination of the TPMS low tire pres-

sure telltale.
Your vehicle has also been equipped with a TPMS malfunc-

tion indicator to indicate when the system is not operating

properly. The TPMS malfunction indicator is combined with

the  low  tire  pressure  telltale.  When  the  system  detects  a

malfunction,  the  telltale  will  flash  for  approximately  one

minute  and  then  remain  continuously  illuminated.  This

sequence will continue upon subsequent vehicle start-ups as

long as the malfunction exists. When the malfunction indi-

cator is illuminated, the system may not be able to detect or

signal  low  tire  pressure  as  intended.  TPMS  malfunctions

may occur for a variety of reasons, including the installation

of replacement or alternate tires or wheels on the vehicle that

prevent the TPMS from functioning properly. Always check

the TPMS  malfunction  telltale  after  replacing  one or  more

tires or wheels on your vehicle to ensure that the replace-

ment  or  alternate  tires  and  wheels  allow  the  TPMS  to

continue to function properly.

 — Anti-Lock Brake (ABS) Warning Light 

This  warning  light  monitors  the  Anti-Lock  Brake  System

(ABS). The light will turn on when the ignition is placed in

the ON/RUN or ACC/ON/RUN position and may stay on

for as long as four seconds.
If the ABS light remains on or turns on while driving, then

the Anti-Lock portion of the brake system is not functioning

and  service  is  required  as  soon  as  possible.  However,  the

conventional  brake  system  will  continue  to  operate

normally, assuming the Brake Warning Light is not also on.

CAUTION!

The  TPMS  has  been  optimized  for  the  original

equipment  tires  and  wheels.  TPMS  pressures  and

warning have been established for the tire size equipped

on your vehicle. Undesirable system operation or sensor

damage may result when using replacement equipment

that  is  not  of  the  same  size,  type,  and/or  style.

Aftermarket  wheels  can  cause  sensor  damage.  Using

aftermarket  tire  sealants  may  cause  the  Tire  Pressure

Monitoring  System  (TPMS)  sensor  to  become

inoperable. After using an  aftermarket tire sealant  it  is

recommended  that  you  take  your  vehicle  to  your

authorized dealer to have your sensor function checked.

3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

188 GETTING TO KNOW YOUR INSTRUMENT PANEL

If the ABS light does not turn on when the ignition is placed

in the ON/RUN or ACC/ON/RUN position, have the brake

system inspected by an authorized dealer.

 — Rear Axle Locker Fault Indicator Light — If 

Equipped

This  warning  light will  illuminate to indicate  when a rear

axle locker fault has been detected.

 — Service Forward Collision Warning (FCW) Light — 

If Equipped

This warning light will illuminate to indicate a fault in the

Forward Collision Warning System. Contact an authorized

dealer for service.
Refer to "Forward Collision Warning (FCW)" in "Safety" for

further information.

 — Service 4WD Warning Light — If Equipped

This warning light will illuminate to signal a fault with the 4WD

system. If the light stays on or comes on during driving, it means

that  the  4WD  system  is  not  functioning  properly  and  that

service  is  required.  We  recommend  you  drive  to  the  nearest

service center and have the vehicle serviced immediately.

 — Speed Control Fault Warning Light

This  warning  light  will  illuminate  to  indicate  the  Speed

Control  System  is  not  functioning  properly  and  service  is

required. Contact an authorized dealer.

 — Sway Bar Fault Warning Light

This light will illuminate when there is a fault in the sway bar

disconnect system.

Yellow Indicator Lights

 — Forward Collision Warning Off Indicator Light — If 

Equipped

This  indicator  light  illuminates  to  indicate  that  Forward

Collision Warning is off.

 — Air Suspension Payload Protection Indicator Light — 

If Equipped

This  indicator  light  will  illuminate  to  indicate  that  the

maximum payload may have been exceeded or load leveling

cannot  be  achieved  at  its  current  ride  height.  Protection

Mode will automatically be selected in order to “protect” the

air suspension system, air suspension adjustment is limited

due to payload.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     9      10      11      12     ..