|
|
Fig. 2-91 AN015 Fig. 2-92 AN407D 2. Install the Crankshaft Protector Cap (p/n 0644-234) onto the end of the crankshaft. Fig. 2-93 AN018 Fig. 2-94 AN408D NOTE: A suitable substitute protective cap can be made by welding a 3 mm (1/8 in.) plate on one side 3. Using the Flywheel Puller/Spanner Wrench (p/n 0144-310) or suitable substitute, remove the To prevent damage to the crankshaft, the puller Fig. 2-95 AR105 ! CAUTION 2 2-23 |