|
|
ISO
10520
Native Starch - Determination of Starch Content - Ewers Polarimetric Method First Edition
Road vehicles Road load Part 1: Determination under reference atmospheric conditions First Edition; Together with ISO 10521-
ISO
10521-1
2:2006 replaces ISO 10521:1992
Road vehicles Road load Part 2: Reproduction on chassis dynamometer First Edition; Together with ISO 10521-1:2006 replaces
ISO
10521-2
ISO 10521:1992
ISO
10522
Agricultural Irrigation Equipment - Direct-Acting Pressure-Regulating Valves First Edition
ISO
10523
Water Quality - Determination of pH First Edition
Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices First
ISO
10524-1
Edition; Supersedes ISO 10524: 1995
ISO
10524-2
Pressure regulators for use with medical gases Part 2: Manifold and line pressure regulators First edition
ISO
10524-3
Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves First edition
ISO
10525
Counterbalanced Trucks Handling Freight Containers of 6 m (20 ft) Length and Above - Additional Stability Tests First Edition
ISO
10526
CIE Standard Illuminants for Colorimetry Second Edition; CIE S 005
ISO
10528
Textiles - Commercial Laundering Procedure for Textile Fabrics Prior to Flammability Testing First Edition (CEN EN ISO 10528 : 1995
ISO
10530
Water Quality - Determination of Dissolved Sulfide - Photometric Method Using Methylene Blue First Edition
ISO
10531
Packaging - Complete, Filled Transport Packages - Stability Testing of Unit Loads First Edition
Earth-Moving Machinery - Machine-Mounted Retrieval Device - Performance Requirements First Edition First Edition; Amendment 1:
ISO
10532
9/1/2004
ISO
10533
Earth-Moving Machinery - Lift-Arm Support Devices First Edition; Amendment 1: 06/01/2005
Acoustics - Determination of Sound Absorption Coefficient and Impedance in Impedance Tubes - Part 1: Method Using Standing
ISO
10534-1
Wave Ratio First Edition
Acoustics - Determination of Sound Absorption Coefficient and Impedance in Impedance Tubes - Part 2: Transfer-Function Method
ISO
10534-2
First Edition
ISO
10535
Hoists for the transfer of disabled persons Requirements and test methods Second Edition
ISO
10536-1
Identification Cards - Contactless Integrated Circuit(s) Cards - Close-Coupled Cards - Part 1: Physical Characteristics Second Edition
ISO
10536-2
Identification Cards - Contactless Integrated Circuit(s) Cards - Part 2: Dimensions and Location of Coupling Areas First Edition
ISO
10536-3
Identification Cards - Contactless Integrated Circuit(s) Cards - Part 3: Electronic Signals and Reset Procedures First Edition
ISO
10538
Information Technology - Control Functions for Text Communication First Edition
ISO
10539
Animal and Vegetable Fats and Oils - Determination of Alkalinity First Edition
ISO
10540-1
Animal and Vegetable Fats and Oils - Determination of Phosphorus Content - Part 1: Colorimetric Method First Edition
Animal and vegetable fats and oils Determination of phosphorus content Part 2: Method using graphite furnace atomic absorption
ISO
10540-2
spectrometry First Edition
Animal and vegetable fats and oils Determination of phosphorus content Part 3: Method using inductively coupled plasma (ICP)
ISO
10540-3
optical emission spectroscopy First Edition
Technical Systems and Aids for Disabled or Handicapped Persons - Wheelchair Tiedown and Occupant-Restraint Systems - Part 1:
ISO
10542-1
Requirements and Test Methods for All Systems First Edition
Technical Systems and Aids for Disabled or Handicapped Persons - Wheelchair Tiedown and Occupant-Restraint Systems - Part 2:
ISO
10542-2
Four-Point Strap-Type Tiedown Systems First Edition
Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 3:
ISO
10542-3
Docking-type tiedown systems First Edition
Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 4: Clamp-
ISO
10542-4
type tiedown systems First Edition
Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 5:
ISO
10542-5
Systems for specific wheelchairs First Edition
Seamless and Hot-Stretched-Reduced Welded Steel Tubes for Pressure Purposes - Full Peripheral Ultrasonic Thickness Testing
ISO
10543
First Edition
ISO
10544
Cold-Reduced Steel Wire for the Reinforcement of Concrete and the Manufacture of Welded Fabric First Edition
ISO
10545-1
Ceramic Tiles - Part 1: Sampling and Basis for Acceptance First Edition
ISO
10545-2
Ceramic Tiles - Part 2: Determination of Dimensions and Surface Quality First Edition; Corrigendum 1 02/15/1997
Ceramic Tiles - Part 3: Determination of Water Absorption, Apparent Porosity, Apparent Relative Density and Bulk Density First
ISO
10545-3
Edition; Corrigendum 1 02/15/1997
ISO
10545-4
Ceramic Tiles - Part 4: Determination of Modulus of Rupture and Breaking Strength Second Edition
Ceramic Tiles - Part 5: Determination of Impact Resistance by Measurement of Coefficient of Restitution First Edition; Corrigendum 1
ISO
10545-5
02/15/1997
ISO
10545-6
Ceramic Tiles - Part 6: Determination of Resistance to Deep Abrasion for Unglazed Tiles First Edition
ISO
10545-7
Ceramic Tiles - Part 7: Determination of Resistance to Surface Abrasion for Glazed Tiles First Edition
ISO
10545-8
Ceramic Tiles - Part 8: Determination of Linear Thermal Expansion First Edition CEN 10 545-8: 1996
ISO
10545-9
Ceramic tiles Part 9: Determination of resistance to thermal shock Second Edition
ISO
10545-10
Ceramic Tiles - Part 10: Determination of Moisture Expansion First Edition
ISO
10545-11
Ceramic Tiles - Part 11: Determination of Crazing Resistance for Glazed Tiles First Edition CEN EN ISO 10 545-11: 1996
ISO
10545-12
Ceramic Tiles - Part 12: Determination of Frost Resistance First Edition; Corrigendum 1 02/15/1997
ISO
10545-13
Ceramic Tiles - Part 13: Determination of Chemical Resistance First Edition
ISO
10545-14
Ceramic Tiles - Part 14: Determination of Resistance to Stains First Edition; Corrigendum 1 02/15/1997
ISO
10545-15
Ceramic Tiles - Part 15: Determination of Lead and Cadmium Given off by Glazed Tiles First Edition
ISO
10545-16
Ceramic Tiles - Part 16: Determination of Small Colour Differences First Edition
Chemical Conversion Coatings - Rinsed and Non-Rinsed Chromate Conversion Coatings on Aluminium and Aluminium Alloys First
ISO
10546
Edition
ISO
10548
Carbon Fibre - Determination of Size Content Second Edition
ISO
10550
Micrographics - Planetary Camera Systems - Test Target for Checking Performance First Edition
Ergonomics of the Thermal Environment - Assessment of the Influence of the Thermal Environment Using Subjective Judgement
ISO
10551
Scales First Edition
ISO
10552
Timekeeping Instruments - Crowns and Sealed Tubes - Designs and Dimensions First Edition
ISO
10553
Horology - Procedure for Evaluating the Accuracy of Quartz Watches First Edition; Replaces ISO TR 10553
Sterile, Single-Use Intravascular Catheters - Part 1: General Requirements First Edition; CEN EN ISO 10 555-1: 1996; Amendment 1:
ISO
10555-1
7/15/99; Amendment 2: 05/15/2004
ISO
10555-2
Sterile, Single-Use Intravascular Catheters - Part 2: Angiographic Catheters First Edition; Technical Corrigendum 1: 6/15/2002
ISO
10555-3
Sterile, Single-Use Intravascular Catheters - Part 3: Central Venous Catheters First Edition; Corrigendum 1: 6/15/2002
ISO
10555-4
Sterile, Single-Use Intravascular Catheters - Part 4: Balloon Dilatation Catheters First Edition; Corrigendum 1: 6/15/2002
Sterile, Single-Use Intravascular Catheters - Part 5: Over-Needle Peripheral Catheters First Edition; Amendment 1: 01/15/1999;
ISO
10555-5
Corrected and Reprinted 07/15/1999: Corrigendum 1: 6/15/2002
Information Technology - Office Equipment - Printing Devices - Method for Measuring Throughput - Class 1 and Class 2 Printers
ISO
10561
Second Edition
ISO
10563
Building construction - Sealants - Determination of change in mass and volume Second Edition
ISO
10564
Soldering and Brazing Materials - Methods for the Sampling of Soft Solders for Analysis First Edition
Oilseeds - Simultaneous Determination of Oil and Water Contents - Method Using Pulsed Nuclear Magnetic Resonance
ISO
10565
Spectrometry Second Edition
ISO
10566
Water Quality - Determination of Aluminium - Spectrometric Method Using Pyrocatechol Violet First Edition
ISO
10567
Earth-Moving Machinery - Hydraulic Excavators - Lift Capacity First Edition; (Corrected and Reprinted - 1993)
ISO
10570
Earth-moving machinery Articulated frame lock Performance requirements Second Edition
ISO
10571
Tyres for Mobile Cranes and Similar Specialized Machines First Edition
ISO
10573
Soil Quality - Determination of Water Content in the Unsaturated Zone - Neutron Depth Probe Method First Edition
ISO
10576-1
Statistical Methods - Guidelines for the Evaulation of Conformity with Specified Requirements - Part 1: General Principles First Edition
ISO
10578
Technical Drawings - Tolerancing of Orientation and Location - Projected Tolerance Zone First Edition
ISO
10579
Technical Drawings - Dimensioning and Tolerancing - Non-Rigid Parts First Edition
ISO
10583
Aerospace Fluid Systems - Test Methods for Tube/Fitting Assemblies First Edition
ISO
10585
Information and Documentation - Armenian Alphabet Coded Character Set for Bibliographic Information Interchange First Edition
ISO
10586
Information and Documentation - Georgian Alphabet Coded Character Set for Bibliographic Information Interchange First Edition
Metallic and Other Inorganic Coatings - Test for Residual Embrittlement in both Metallic-Coated and Uncoated Externally-Threaded
ISO
10587
Articles and Rods - Inclined Wedge Method First Edition
Information Technology - Use of X.25 Packet Layer Protocol in Conjunction with X.21/X.21 bis to Provide the OSI Connection-Mode
ISO
10588
Network Service First Edition; (CCITT RECMN X.613)
Information Technology - Telecommunications and Information Exchange Between Systems - Intermediate System to Intermediate
System Intra-Domain Routeing Information Exchange Protocol for Use in Conjunction with the Protocol for Providing the
ISO
10589
Connectionless-Mode Network Service (ISO 8473) Second Edition
Building construction Sealants Determination of tensile properties of sealants at maintained extension after immersion in water
ISO
10590
Second Edition
ISO
10591
Building construction Sealants Determination of adhesion/cohesion properties of sealants after immersion in water Second Edition
ISO
10592
Small Craft - Hydraulic Steering Systems First Edition
ISO
10594
Micrographics Rotary Camera Systems Test Target for Checking Performance Second Edition
ISO
10597
Road vehicles Flat attachment fixing nuts for commercial vehicles Test methods Second Edition
ISO
10599-1
Car Radios - Coaxial Aerial Connectors - Part 1: Dimensions First Edition
Car radios - Coaxial aerial connectors - Part 2: Characteristic values, performance requirements and tests First Edition; Corrigendum
ISO
10599-2
1:9/15/2005
ISO
10601
Micaceous iron oxide pigments for paints ù Specifications and test methods Second edition
ISO
10604
Road Vehicles - Measurement Equipment for Orientation of Headlamp Luminous Beams First Edition
Road Vehicles - Test Methods for Electrical Disturbances from Electrostatic Discharge First Edition; Cancels and Replaces ISO TR
ISO
10605
10605
ISO
10618
Carbon Fibre - Determination of Tensile Properties of Resin-Impregnated Yarn Second Edition
ISO
10620
Dried Sweet Marjoram (Origanum Majorana L.) - Specification First Edition
ISO
10621
Dehydrated Green Pepper (Piper Nigrum L.) - Specification First Edition
ISO
10622
Large Cardamom (Amomum Subulatum Roxb.), as Capsules and Seeds - Specification First Edition
ISO
10624
Oil of Elemi (Canarium Luzonicum Miq.) First Edition
ISO
10625
Equipment for Crop Protection - Sprayer Nozzles - Colour Coding for Identification Second Edition
ISO
10626
Equipment for Crop Protection - Sprayers - Connecting Dimensions for Nozzles with Bayonet Fixing First Edition
ISO
10627-1
Agricultural Sprayers - Data Sheet - Part 1: Typical Layout First Edition
ISO
10627-2
Hydraulic Agricultural Sprayers - Data Sheets - Part 2: Technical Specifications Related to Components First Edition
ISO
10628
Flow Diagrams for Process Plants - General Rules First Edition
Raw Optical Glass - Resistance to Attack by Aqueous Alkaline Solutions at 50 Degrees C - Test Method and Classification First
ISO
10629
Edition
ISO
10630
Industrial Plate Screens - Specifications and Test Methods First Edition
ISO
10631
Metallic Butterfly Valves for General Purposes First Edition
Oilseed Residues - Simultaneous Determination of Oil and Water Contents - Method Using Pulsed Nuclear Magnetic Resonance
ISO
10632
Spectroscopy First Edition
Oilseed Residues - Determination of Glucosinolates Content - Part 1: Method Using High-Performance Liquid Chromatography First
ISO
10633-1
Edition
Water Quality - Guidance for the Preparation and Treatment of Poorly Water-Soluble Organic Compounds for the Subsequent
ISO
10634
Evaluation of Their Biodegradability in an Aqueous Medium First Edition (CEN EN ISO 10634: 1995)
ISO
10635
Refractory Products - Methods of Test for Ceramic Fibre Products First Edition
Photography - Processing Chemicals - Specifications for Anhydrous Sodium Thiosulfate and Sodium Thiosulfate Pentahydrate First
ISO
10636
Edition;
ISO
10637
Dental Equipment - High- and Medium-Volume Suction Systems First Edition
Plastics piping systems for pressure and non-pressure water supply Glass-reinforced thermosetting plastics (GRP) systems based
ISO
10639
on unsaturated polyester (UP) resin First Edition
Information Technology - Computer Graphics and Image Processing - Conformance Testing of Implementations of Graphics
ISO
10641
Standards First Edition
ISO
10642
Hexagon socket countersunk head screws Second Edition
ISO
10644
Screw and Washer Assemblies with Plain Washers - Washer Hardness Classes 200 HV and 300 HV First Edition
ISO
10645
Nuclear Energy - Light Water Reactors - Calculation of the Decay Heat Power in Nuclear Fuels First Edition
Information technology ù Universal Multiple-Octet Coded Character Set (UCS) AMENDMENT 2: N'Ko, Phags-pa, Phoenician and
ISO
10646 AMD 2
other characters First Edition
Information technology ù Universal Multiple-Octet Coded Character Set (UCS) AMENDMENT 1: Glagolitic, Coptic, Georgian and
ISO
10646 AMD 1
other characters First Edition
Information Technology - Universal Multiple-Octet Coded Character Set (UCS) First Edition [Replaced: ISO 10646-1, ISO 10646-1,
ISO
10646
ISO 10646-1, ISO 10646-2]
ISO
10648-1
Containment Enclosures - Part 1: Design Principles First Edition
ISO
10648-2
Containment Enclosures - Part 2: Classification According to Leak Tightness and Associated Checking Methods First Edition
Dentistry Powered polymerization activators Part 1: Quartz tungsten halogen lamps First Edition; Together with ISO 10650-2
ISO
10650-1
Replaces ISO TS 10650:1999
ISO
10650-2
Dentistry ù Powered polymerization activators ù Part 2: Light-emitting diode (LED) lamps First Edition [Cancelled: ISO TS 10650]
Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 2: Home care ventilators
ISO
10651-2
for ventilatordependent patients Second Edition
ISO
10651-3
Lung Ventilators for Medical Use - Part 3: Particular Requirements for Emergency and Transport Ventilators First Edition
Lung Ventilators- - Part 4: Particular Requirements for Operator-Powered Resuscitators First Edition; Together with ISO 10651-
ISO
10651-4
5:2006 replaces ISO 8382:1988 [Superseded: ASTM F 920, ASTM F 920]
Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 5: Gas-powered
emergency resuscitators First Edition; Together with ISO 10651-4:2002 replaces ISO 8382:1988 [Superseded: ASTM F 920, ASTM F
ISO
10651-5
920]
Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 6: Home-care ventilatory
ISO
10651-6
support devices First Edition; Partly replaces ISO 10651-2:1996
ISO
10653
Light-Gauge Metal Containers - Round Open-Top Cans - Cans Defined by Their Nominal Gross Lidded Capacities First Edition;
Light-Gauge Metal Containers - Round Open-Top Cans - Cans for Liquid Products with Added Gas, Defined by Their Nominal Filling
ISO
10654
Volumes First Edition;
ISO
10656
Electric Resistance Welding - Integrated Transformers for Welding Guns First Edition; Corrigendum 1: 07/01/2000
Industrial Trucks Operating in Special Conditions of Stacking with Load Laterally Displaced by Powered Devices - Additional Stability
ISO
10658
Test First Edition
ISO
10663
Hexagon Nuts with Flange - Fine Pitch Thread First Edition
ISO
10664
Hexalobular internal driving feature for bolts and screws Second Edition
ISO
10666
Drilling Screws With Tapping Screw Thread - Mechanical and Functional Properties First Edition
ISO
10669
Plain Washers for Tapping Screw and Washer Assemblies - Normal and Large Series - Product Grade A First Edition
ISO
10673
Plain Washers for Screw and Washer Assemblies - Small, Normal and Large Series - Product Grade A First Edition
ISO
10683
Fasteners - Non-Electrolytically Applied Zinc Flake Coatings First Edition; JIS B 1046:2005
ISO
10684
Fasteners Hot dip galvanized coatings First Edition
Gas cylinders Refillable welded steel cylinders for liquified petroleum gas (LPG) Procedures for checking before, during and after
ISO
10691
filling First Edition
ISO
10692-1
Gas Cylinders Gas Cylinder Valve Connections for use in the Micro-Electronics Industry Part 1: Outlet Connections First Edition
Gas Cylinders - Gas Cylinder Valve Connections for Use in the Micro-Electronics Industry - Part 2: Specification and Type Testing for
ISO
10692-2
Valve to Cylinder Connections First Edition
ISO
10693
Soil Quality - Determination of Carbonate Content - Volumetric Method First Edition
ISO
10694
Soil Quality - Determination of Organic and Total Carbon After Dry Combustion (Elementary Analysis) First Edition
Water Quality - Determination of Selected Organic Nitrogen and Phosphorus Compounds - Gas Chromatographic Methods First
ISO
10695
Edition
Steel - Determination of Calcium Content by Flame Atomic Absorption Spectrometry - Part 1: Determination of Acid- Soluble Calcium
ISO
10697-1
Content First Edition
ISO
10697-2
Steel - Determination of Calcium Content by Flame Atomic Absorption Spectrometry - Part 2: Determination of Total Calcium Content
ISO
10698
Steel - Determination of Antimony Content - Electrothermal Atomic Absorption Spectrometric Method First Edition
Steel and Iron - Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method First Edition (CEN EN ISO
ISO
10700
10700: 1995)
ISO
10701
Steel and Iron - Determination of Sulfur Content - Methylene Blue Spectrophotometric Method First Edition
ISO
10702
Steer and Iron - Determination of Nitrogen Content - Titrimetric Method After Distillation First Edition
Water Quality - Determination of the Activity Concentration of Radionuclides by High Resolution Gamma-Ray Spectrometry First
ISO
10703
Edition
ISO
10705-1
Water Quality - Detection and Enumeration of Bacteriophages - Part 1: Enumeration of F-Specific RNA Bacteriophages First Edition
ISO
10705-2
Water Quality - Detection and Enumeration of Bacteriophages - Part 2: Enumeration of Somatic Coliphages First Edition
Water quality Detection and enumeration of bacteriophages Part 3: Validation of methods for concentration of bacteriophages from
ISO
10705-3
water First Edition
Water Quality - Detection and Enumeration of Bacteriophages - Part 4: Enumeration of Bacteriophages Infecting Bacteroides Fragilis
ISO
10705-4
First Edition
ISO
10706
Water Quality - Determination of Long Term Toxicity of Substances to Daphnia Magna Straus (Cladocera, Crustacea) First Edition
Water Quality - Evaluation in an Aqueous Medium of theUltimate" Aerobic Biodegradability of Organic Compounds - Method by
ISO
10707
Analysis of Biochemical Oxygen Demand (Closed Bottle Test) First Edition"
Water Quality - Evaluation in an Aqueous Medium of the Ultimate Aerobic Biodegradability of Organic Compounds - Determination of
ISO
10708
Biochemical Oxygen Demand in a Two-Phase Closed Bottle Test First Edition
ISO
10712
Water Quality - Pseudomonas Putida Growth Inhibition Test (Pseudomonas Cell Multiplication Inhibition Test) First Edition
ISO
10713
Jewellery - Gold Alloy Coatings First Edition
ISO
10714
Steel and Iron - Determination of Phosphorus Content - Phosphovanadomolybdate Spectrophotometric Method First Edition
ISO
10715
Natural Gas - Sampling Guidelines First Edition
ISO
10716
Paper and Board - Determination of Alkali Reserve First Edition
Cork Stoppers - Enumeration of Colony-Forming Units of Yeasts, Moulds and Bacteria Capable of Growth in an Alcoholic Medium
ISO
10718
Second Edition
Steel and Iron - Determination of Nitrogen Content - Thermal Conductimetric Method After Fusion in a Current of Inert Gas First
ISO
10720
Edition; BS 6200: Part 3: Section 3.22: Subsection 3.22.4: 1997
ISO
10721-1
Steel Structures - Part 1: Materials and Design First Edition
ISO
10721-2
Steel Structures - Part 2: Fabrication and Erection First Edition; Corrected and Reprinted 09-15-2000
Geosynthetics ù Index test procedure for the evaluation of mechanical damage under repeated loading ù Damage caused by
ISO
10722
granular material FIrst Edition [Superseded: ISO TR 10722-1]
ISO
10723
Natural Gas - Performance Evaluation for On-Line Analytical Systems First Edition; Technical Corrigendum 1-1998
Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 1: General Principles
ISO
10724-1
and Moulding of Multipurpose Test Specimens First Edition
Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 2: Small Plates First
ISO
10724-2
Edition
ISO
10725
Acceptance Sampling Plans and Procedures for the Inspection of Bulk Materials First Edition
ISO
10726
Portable Chain-Saws - Chain Catcher - Dimensions and Mechanical Strength First Edition
Tea and Instant Tea in Solid Form - Determination of Caffeine Content - Method Using High-Performance Liquid Chromatography
ISO
10727
Second Edition
Information Technology - Information Resource Dictionary System (IRDS) Services Interface First Edition; Amendment 1-1995;
ISO
10728
Amendment 2-1996; Amendment 3-1996; Amendment 4-1998
Information Technology - Open Systems Interconnection - Basic Reference Model - Conventions for the Definition of OSI Services
ISO
10731
First Edition
Information Technology - Use of X.25 Packet Layer Protocol to Provide the OSI Connection-Mode Network Service over the
ISO
10732
Telephone Network First Edition; (CCITT RECMN X.614)
ISO
10733
Information Technology - Elements of Management Information Related to OSI Network Layer Second Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Transport Layer Security Protocol First
ISO
10736
Edition
ISO
10737
Information Technology - Elements of Management Information Related to the OSI Transport Layer Second Edition
Information Technology - User System Interfaces - Dialogue Interaction - Part 1: Cursor Control for Text Editing First Edition;
ISO
10741-1
Amendment 1 - 12/15/1996
Information Technology - Telecommunications and Information Exchange Between Systems - Elements of Management Information
Related to OSI Data Link Layer Standards First Edition; Amendment 1-11/15/1995; Amendment 2-07/15/1996; Amendment 3-
ISO
10742
12/15/1996; Corrigendum 1-06/15/1999
ISO
10744
Information Technology - Hypermedia/Time-Based Structuring Language (HyTime) Second Edition
ISO
10745
Information Technology - Open Systems Interconnection - Upper Layers Security Model First Edition
ISO
10746-1
Information Technology - Open Distributed Processing - Reference Model: Overview First Edition
ISO
10746-2
Information Technology - Open Distributed Processing - Reference Model: Foundations First Edition
ISO
10746-3
Information Technology - Open Distributed Processing - Reference Model: Architecture First Edition
Information Technology - Open Distributed Processing - Reference Model: Architectural Semantics First Edition; Amendment 1:
ISO
10746-4
12/15/2001
Information Technology - Telecommunications and Information Exchange between Systems - Protocol for Exchange of Inter-Domain
Routeing Information Among Intermediate Systems to Support Forwarding of ISO 8473 PDUs First Edition; Amendment 1-1996;
ISO
10747
Corrigendum 1-1996
ISO
10752
Coal Sizing Equipment - Performance Evaluation First Edition
ISO
10753
Coal Preparation Plant - Assessment of the Liability to Breakdown in Water of Materials Associated with Coal Seams First Edition
Information and Documentation - Extension of the Cyrillic Alphabet Coded Character Set for Non-Slavic Languages for Bibliographic
ISO
10754
Information Interchange FIrst Edition
ISO
10762
Hydraulic Fluid Power - Cylinder Mounting Dimensions - 10 MPa (100 Bar) Series First Edition
Hydraulic Fluid Power - Plain-End, Seamless and Welded Precision Steel Tubes - Dimensions and Nominal Working Pressures First
ISO
10763
Edition
ISO
10766
Hydraulic fluid power Cylinders Housing dimensions for rectangularsection- cut bearing rings for pistons and rods Second Edition
Hydraulic Fluid Power - Determination of Pressure Ripple Levels Generated in Systems and Components - Part 1: Precision Method
ISO
10767-1
for Pumps First Edition
Hydraulic Fluid Power - Determination of Pressure Ripple Levels Generated in Systems and Components - Part 2: Simplified Method
ISO
10767-2
for Pumps First Edition
Hydraulic Fluid Power - Determination of Pressure Ripple Levels Generated in Systems and Components - Part 3: Method for Motors
ISO
10767-3
First Edition
Hydraulic Fluid Power - Electrically Modulated Hydraulic Control Valves - Part 1: Test Methods for Four-Way Directional Flow Control
ISO
10770-1
Valves First Edition; Together with ISO 10770-2, it Cancels and Replaces ISO 6404: 1985
Hydraulic Fluid Power - Electrically Modulated Hydraulic Control Valves - Part 2: Test Methods for Three-Way Directional Flow
ISO
10770-2
Control Valves First Edition; Together with ISO 10770-1, it Cancels and Replaces ISO 6404: 1985
ISO
10771-1
Hydraulic Fluid Power - Fatigue Pressure Testing of Metal Pressure-Containing Envelopes - Part 1: Test Methods First Edition
ISO
10775
Paper, Board and Pulps - Determination of Cadmium Content - Atomic Absorption Spectrometric Method First Edition
ISO
10780
Stationary Source Emissions - Measurement of Velocity and Volume Flowrate of Gas Streams in Ducts First Edition
Definitions and Attributes of Data Elements for Control and Monitoring of Textile Processes - Part 1: Spinning, Spinning Preparatory
and Related Processes Definitions Et Attributs Des Elements De Donnees Pour La Surveillance Et La Supervision Des Procedes
ISO
10782-1
Textiles - Partie 1: Filature, Preparation De Filature Et Procedes Associes First Edition
Textile Machinery and Accessories - Heald Frames - Part 1: Heald-Carrying Rod Fixed to the Frame Stave by Rod Support -
ISO
10787-1
Coordinated Dimensions First Edition;
Textile Machinery and Accessories - Heald Frames - Part 2: Heald-Carrying Rod Fixed Directly on the Frame Stave - Coordinated
ISO
10787-2
Dimensions First Edition;
ISO
10787-3
Textile Machinery and Accessories - Heald Frames - Part 3: Guides for Heald Frames First Edition
Measurement of Fluid Flow in Closed Conduits - Guidance to the Selection, Installation and Use of Coriolis Meters (Mass Flow,
ISO
10790
Density and Volume Flow Measurements) Second Edition; Amendment 1: 6/01/2003
Test Conditions for Machining Centres - Part 1: Geometric Tests for Machines with Horizontal Spindle and with Accessory Heads
ISO
10791-1
(Horizontal Z-Axis) First Edition; Corrected and Reprinted 05/01/1999
Test Conditions for Machining Centres - Part 2: Geometric Tests for Machines with Vertical Spindle or Universal Heads with Vertical
ISO
10791-2
Primary Rotary Axis (Vertical Z-Axis) First Edition
Test Conditions for Machining Centres - Part 3: Geometric Tests for Machines with Integral Indexable or Continuous Universal Heads
ISO
10791-3
(Vertical Z-Axis) First Edition; Corrigendum 1: 11-15-99
ISO
10791-4
Test Conditions for Machining Centres - Part 4: Accuracy and Repeatability of Positioning of Linear and Rotary Axes First Edition
ISO
10791-5
Test Conditions for Machining Centres - Part 5: Accuracy and Repeatability of Positioning of Work-Holding Pallets First Edition
Test Conditions for Machining Centres - Part 6: Accuracy of Feeds, Speeds and Interpolations First Edition; Technical Corrigendum
ISO
10791-6
1:4/1/2004
ISO
10791-7
Test Conditions for Machining Centres - Part 7: Accuracy of a Finished Test Piece First Edition
ISO
10791-8
Test Conditions for Machining Centres - Part 8: Evaluation of Contouring Performance in the Three Coordinate Planes First Edition
ISO
10791-9
Test Conditions for Machining Centres - Part 9: Evaluation of the Operating Times of Tool Change and Pallet Change First Edition
ISO
10791-10
Test conditions for machining centres ù Part 10: Evaluation of thermal distortions First Edition
Aerospace - Airframe Spherical Plain Bearings in Corrosion- Resisting Steel with Self-Lubricating Liner - Part 1: Metric Series First
ISO
10792-1
Edition
Aerospace - Airframe Spherical Plain Bearings in Corrosion- Resisting Steel with Self-Lubricating Liner - Part 2: Inch Series First
ISO
10792-2
Edition
Aerospace - Airframe Spherical Plain Bearings in Corrosion- Resisting Steel with Self-Lubricating Liner - Part 3: Technical
ISO
10792-3
Specification First Edition
ISO
10799
Structural Steels - Cold-Formed, Welded, Structural Hollow Sections - Technical Delivery Requirements First Edition
ISO
10802
Ductile Iron Pipelines - Hydrostatic Testing After Installation First Edition
ISO
10803
Design Method for Ductile Iron Pipes First Edition
ISO
10804-1
Restrained Joint Systems for Ductile Iron Pipelines - Part 1: Design Rules and Type Testing First Edition
ISO
10806
Pipework Fittings for corrugated metal hoses Second Edition
Pipework - Corrugated Flexible Metallic Hose Assemblies for the Protection of Electrical Cables in Explosive Atmospheres First
ISO
10807
Edition
Vibration generating machines ù Guidance for selection ù Part 1: Equipment for environmental testing TECHNICAL CORRIGENDUM
ISO
10813-1 CORR 1
1 First Edition
ISO
10813-1
Vibration generating machines ù Guidance for selection ù Part 1 Equipment for environmental testing First Edition
ISO
10814
Mechanical Vibration - Susceptibility and Sensitivity of Machines to Unbalance First Edition
ISO
10815
Mechanical Vibration - Measurement of Vibration Generated Internally in Railway Tunnels by the Passage of Trains First Edition
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 1: General Guidelines First
ISO
10816-1
Edition; Replaces ISO 2372: 1974 and ISO 3945: 1985
Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines
and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min Second
ISO
10816-2
Edition; Corrigendum 1:08/01/2004
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 3: Industrial Machines with
ISO
10816-3
Nominal Power Above 15 kW and Nominal Speeds between 120 r/min and 15 000 r/min When Measured In Situ First Edition
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 4: Gas Turbine Driven Sets
ISO
10816-4
Excluding Aircraft Derivatives First Edition
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 5: Machine Sets in Hydraulic
ISO
10816-5
Power Generating and Pumping Plants First Edition
Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 6: Reciprocating Machines
ISO
10816-6
with Power Ratings Above 100 kW First Edition
ISO
10817-1
Rotating Shaft Vibration Measuring Systems - Part 1: Relative and Absolute Sensing of Radial Vibration First Edition
Mechanical Vibration and Shock - Hand-Arm Vibration - Method for the Measurement and Evaluation of the Vibration Transmissibility
ISO
10819
of Gloves at the Palm of the Hand First Edition
ISO
10821
Industrial sewing machines Safety requirements for sewing machines, units and systems First Edition
ISO
10823
Guidelines for the selection of roller chain drives Second Edition
ISO
10825
Gears - Wear and Damage to Gear Teeth - Terminology First Edition
Textile Floor Coverings - Determination of Resistance to Damage at Cut Edges Using the Modified Vettermann Drum Test Second
ISO
10833
Edition
Textile Floor Coverings - Non-Destructive Measurement of Pile Thickness Above the Backing - WRONZ Gauge Method First Edition
ISO
10834
(AS/NZS 2111.21: 1996)
ISO
10835
Direct reduced iron and hot briquetted iron ù Sampling and sample preparation Second Edition
ISO
10836
Iron Ores - Method of Sampling and Sample Preparation for Physical Testing First Edition
Mechanical Fittings for Polyethylene Piping Systems for the Supply of Gaseous Fuels - Part 1: Metal Fittings for Pipes of Nominal
ISO
10838-1
Outside Diameter Less Than or Equal to 63 mm First Edition
Mechanical Fittings for Polyethylene Piping Systems for the Supply of Gaseous Fuels - Part 2: Metal Fittings for Pipes of Nominal
ISO
10838-2
Outside Diameter Greater Than 63 mm First Edition
Mechanical Fittings for Polyethylene Piping Systems for the Supply of Gaseous Fuels - Part 3: Thermoplastics Fittings for Pipes of
ISO
10838-3
Nominal Outside Diameter Less Than or Equal to 63 mm First Edition
ISO
10840
Plastics - Guidance for the Use of Standard Fire Tests First Edition; Replaces ISO TR 10840
ISO
10841
Aircraft - Catering Vehicle for Large Capacity Aircraft - Functional Requirements First Edition
ISO
10842
Aircraft Ground service connections Locations and types First Edition
ISO
10843
Acoustics - Methods for the Description and Physical Measurement of Single Impulses or Series of Impulses First Edition
ISO
10844
Acoustics - Specification of Test Tracks for the Purpose of Measuring Noise Emitted by Road Vehicles First Edition
Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 1: Principles
ISO
10846-1
and Guidelines First Edition
Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 2: Dynamic
ISO
10846-2
Stiffness of Elastic Supports for Translatory Motion - Direct Method First Edition
Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 3: Indirect
ISO
10846-3
Method for Determination of the Dynamic Stiffness of Resilient Supports for Translatory Motion First Edition
Acoustics and vibration Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 4: Dynamic stiffness
ISO
10846-4
of elements other than resilient supports for translatory motion First Edition
ISO
10847
Acoustics - In-Situ Determination of Insertion Loss of Outdoor Noise Barriers of All Types First Edition
Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 1:
ISO
10848-1
Frame document First Edition
Acoustics ù Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms ù Part 2:
ISO
10848-2 CORR 1
Application to light elements when the junction has a small influence
Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 2:
ISO
10848-2
Application to light elements when the junction has a small influence First Edition;:2000 [Replaced: ISO 140-12]
Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 3:
ISO
10848-3
Application to light elements when the junction has a substantial influence First Edition
Stationary Source Emissions - Determination of the Mass Concentration of Nitrogen Oxides - Performance Characteristics of
ISO
10849
Automated Measuring Systems First Edition
ISO
10857
Information Technology - Microprocessor Systems - Futurebus+ - Logical Protocol Specification First Edition; (ANSI/IEEE 896.1)
ISO
10859
Information Technology - 8-Bit Backplane Interface: STEbus and Mechanical Core Specifications for Microcomputers First Edition
Information Technology - Microprocessor Systems - High-Performance Synchronous 32-Bit Bus: MULTIBUS II First Edition;
ISO
10861
(ANSI/IEEE 1296)
Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and Gases in the Operator s Breathing Zone -
ISO
10882-1
Part 1: Sampling of Airborne Particles First Edition
Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and Gases in the Operator s Breathing Zone -
ISO
10882-2
Part 2: Sampling of Gases First Edition
ISO
10885
Information Technology - 356 mm Optical Disk Cartridge for Information Interchange - Write Once First Edition
ISO
10887
Key Type Three-Jaw Drill Chucks - Specification First Edition
ISO
10888
Keyless Type Three-Jaw Drill Chucks - Specification First Edition
ISO
10889-1
Tool Holders with Cylindrical Shank - Part 1: Cylindrical Shank, Location Bore - Technical Delivery Conditions Second Edition
ISO
10889-2
Tool Holders with Cylindrical Shank - Part 2: Type A, Shanks for Tool Holders of Special Designs Second Edition
ISO
10889-3
Tool Holders with Cylindrical Shank - Part 3: Type B with Rectangular Radial Seat Second Edition
ISO
10889-4
Tool Holders with Cylindrical Shank - Part 4: Type C with Rectangular Axial Seat Second Edition
ISO
10889-5
Tool Holders with Cylindrical Shank - Part 5: Type D, with More Than One Rectangular Seat First Edition
ISO
10889-6
Tool Holders with Cylindrical Shank - Part 6: Type E, with Cylindrical Seat Second Edition
ISO
10889-7
Tool Holders with Cylindrical Shank - Part 7: Type F with Taper Seat Second Edition
ISO
10889-8
Tool Holders with Cylindrical Shank - Part 8: Type Z, Accessories First Edition
ISO
10897
Collets for Tool Holders with Taper Ratio 1:10 - Collets, Holders, Nuts First Edition
ISO
10898
Spot Drills First Edition (BS 328: Part 8: 1992) (NZS/BS 328: Pt 8: 1992)
ISO
10899
High-Speed Steel Two-Flute Twist Drills - Technical Specifications First Edition
Tools For Moulding - Locating Rings - Part 1: Locating Rings for Mounting without Thermal Insulating Sheets in Small or Medium
ISO
10907-1
Moulds - Types A and B First Edition
ISO
10910
Classification and Designation of Approximate Chip Control Zones for Indexable Inserts with Chipbreakers First Edition
ISO
10911
Solid Hardmetal End Mills With Parallel Shank - Dimensions First Edition
ISO
10914
Assembly Tools for Screws and Nuts - Sockets and Wrenches for Spline Drive First Edition
Information technology - Digital compression and coding of continuous-tone still images - Part 1: Requirements and guidelines First
ISO
10918-1
Edition; Corrigendum 1:2005
ISO
10918-2
Information Technology - Digital Compression and Coding of Continuous-Tone Still Images: Compliance Testing First Edition
Information Technology - Digital Compression and Coding of Continuous-Tone Still Images: Extensions First Edition; Amendment 1:
ISO
10918-3
12/01/1999
Information Technology - Digital Compression and Coding of Continuous-Tone Still Images: Registration of JPEG Profiles, SPIFF
Profiles, SPIFF Tags, SPIFF Colour Spaces, APPn Markers, SPIFF Compression Types and Registration Authorities (REGAUT) First
ISO
10918-4
Edition
ISO
10919
Oriental Leaf Tobacco - Baling First Edition
ISO
10920
Gas Cylinders - 25E Taper Thread for Connection of Valves to Gas Cylinders - Specification First Edition
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Methods for Regression Analysis and
ISO
10928
their Use First Edition
Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system
ISO
10931
First Edition; Replaces ISO 10931-1 thru 10931-5
ISO
10933
Polyethylene (PE) Valves for Gas Distribution Systems First Edition
ISO
10934-1
Optics and optical instruments - Vocabulary for microscopy - Part 1: Light microscopy First Edition
ISO
10934-2
Optics and optical instruments ù Vocabulary for microscopy ù Part 2: Advanced techniques in light microscopy First Edition
ISO
10935
Optics and Optical Instruments - Microscopes - Interfacing Connection Type C First Edition
ISO
10936-1
Optics and Optical Instruments - Operation Microscopes - Part 1: Requirements and Test Methods First Edition
Optics and Optical Instruments - Operation Microscopes - Part 2: Light Hazard from Operation Microscopes Used in Ocular Surgery
ISO
10936-2
First Edition
ISO
10937
Optics and Optical Instruments - Microscopes - Diameter of Interchangeable Eyepieces Second Edition
ISO
10938
Ophthalmic Instruments - Chart Projectors First Edition
ISO
10939
Ophthalmic Instruments - Slit-Lamp Microscopes Second Edition
ISO
10940
Ophthalmic Instruments - Fundus Cameras First Edition
ISO
10942
Ophthalmic Instruments - Direct Ophthalmoscopes Second Edition
ISO
10943
Ophthalmic Instruments - Indirect Ophthalmoscopes Second Edition
ISO
10944
Ophthalmic Instruments - Synoptophores First Edition
ISO
10945
Hydraulic Fluid Power - Gas-Loaded Accumulators - Dimensions of Gas Ports First Edition
ISO
10946
Hydraulic Fluid Power - Gas-Loaded Accumulators with Separator - Selection of Preferred Hydraulic Ports First Edition
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Determination of the Resistance to
ISO
10952
Chemical Attack from the Inside of a Section in a Deflected Condition First Edition
ISO
10955
Aerospace - End-Fittings and Turnbarrels for Aircraft Control Wire Rope - Technical Specification First Edition
ISO
10957
Information and Documentation - International Standard Music Number (ISMN) First Edition
ISO
10958-1
Snowboards - Binding Mounting Area - Part 1: Requirements and Test Methods for Snowboards without Inserts First Edition
ISO
10958-2
Snowboards - Binding Mounting Area - Part 2: Requirements and Test Methods for Snowboards with Inserts Second Edition
ISO
10959
Aerospace - MJ Threads - Gauging First Edition
ISO
10960
Rubber and Plastics Hoses - Assessment of Ozone Resistance Under Dynamic Conditions First Edition CEN EN ISO 10 960: 1996
ISO
10962
Securities and Related Financial Instruments - Classification of Financial Instruments (CFI Code) Second Edition
ISO
10964
Adhesives - Determination of Torque Strength of Anaerobic Adhesives on Threaded Fasteners First Edition
ISO
10965
Textile Floor Coverings - Determination of Electrical Resistance First Edition; Technical Corrigendum 1: 10/15/1999
ISO
10966
Sports and recreational equipment Fabrics for awnings and camping tents Specification Second edition
ISO
10967-1
Information Technology - Language Independent Arithmetric - Part 1: Integer and Floating Point Arithmetic First Edition
ISO
10967-2
Information Technology - Language Independent Arithmetric - Part 2: Elementary Numerical Functions First Edition
Information technology Language independent arithmetic Part 3: Complex integer and floating point arithmetic and complex
ISO
10967-3
elementary numerical functions First Edition
ISO
10968
Earth-Moving Machinery - Operator s Controls Second Edition
ISO
10972-1
Cranes - Requirements for Mechanisms - Part 1: General First Edition
ISO
10972-3
Cranes Requirements for mechanisms Part 3: Tower cranes First Edition
ISO
10972-4
Cranes ù Requirements for mechanisms ù Part 4: Jib cranes First Edition
ISO
10972-5
Cranes Requirements for mechanisms Part 5: Bridge and gantry cranes First Edition
ISO
10973
Cranes - Spare Parts Manual First Edition
ISO
10977
Photography - Processed Photographic Colour Films and Paper Prints - Methods for Measuring Image Stability First Edition
ISO
10979
Identification of Fuel Assemblies for Nuclear Power Reactors First Edition
ISO
10980
Validation of the Strength of Reference Solutions Used for Measuring Concentrations First Edition
Nuclear fuel technology Determination of uranium in reprocessing-plant dissolver solution Liquid chromatography method Second
ISO
10981
Edition
ISO
10983
Timber Structures - Solid Timber Finger-Jointing - Production Requirements First Edition
Caps Made of Aluminium-Plastics Combinations for Infusion Bottles and Injection Vials - Requirements and Test Methods Second
ISO
10985
Edition
ISO
10990-4
Animal (Mammal) Traps - Part 4: Methods for Testing Killing-Trap Systems Used on Land or Underwater First Edition
ISO
10990-5
Animal (Mammal) Traps - Part 5: Methods for Testing Restraining Traps First Edition
ISO
10993-1
Biological Evaluation of Medical Devices - Part 1: Evaluation and Testing Third Edition
ISO
10993-2
Biological evaluation of medical devices Part 2: Animal welfare requirements Second Edition
ISO
10993-3
Biological evaluation of medical devices Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity Second Edition
ISO
10993-4 AMD 1
Biological evaluation of medical devices ù Part 4: Selection of tests for interactions with blood AMENDMENT 1 Second Edition
ISO
10993-4
Biological Evaluation of Medical Devices - Part 4: Selection of Tests for Interactions with Blood Second Edition
ISO
10993-5
Biological Evaluation of Medical Devices - Part 5: Tests for In Vitro Cytotoxicity Second Edition
ISO
10993-6
Biological evaluation of medical devices ù Part 6: Tests for local effects after implantation Second Edition
ISO
10993-7
Biological Evaluation of Medical Devices - Part 7: Ethylene Oxide Sterilization Residuals First Edition; (CEN EN ISO 10993-7: 1995)
Biological Evaluation of Medical Devices - Part 9: Framework for Identification and Quantification of Potential Degradation Products
ISO
10993-9
First Edition
ISO
DIS 10993-9
Biological evaluation of medical devices ù Part 9: Framework for identification and quantification of potential degradation products
Biological evaluation of medical devices ù Part 10: Tests for irritation and delayed-type hypersensitivity AMENDMENT 1 Second
ISO
10993-10 AMD 1
Edition
ISO
10993-10
Biological evaluation of medical devices ù Part 10: Tests for irritation and delayed-type hypersensitivity Second Edition
ISO
10993-11
Biological evaluation of medical devices Part 11: Tests for systemic toxicity Second Edition
Biological Evaluation of Medical Devices - Part 12: Sample Preparation and Reference Materials Second Edition; Corrected Version
ISO
10993-12
06/01/2003
Biological Evaluation of Medical Devices - Part 13: Identification and Quantification of Degradation Products from Polymeric Medical
ISO
10993-13
Devices First Edition
Biological Evaluation of Medical Devices - Part 14: Identification and Quantification of Degradation Products from Ceramics First
ISO
10993-14
Edition
Biological Evaluation of Medical Devices - Part 15: Identification and Quantification of Degradation Products from Metals and Alloys
ISO
10993-15
First Edition; Corrected and Reprinted: 4/01/2001
ISO
10993-16
Biological Evaluation of Medical Devices - Part 16: Toxicokinetic Study Design for Degradation Products and Leachables First Edition
ISO
10993-17
Biological Evaluation of Medical Devices - Part 17: Establishment of Allowable Limits for Leachable Substances First Edition
ISO
10993-18
Biological evaluation of medical devices Part 18: Chemical characterization of materials First Edition
Information Technology - Data Interchange on 90 mm Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 31
ISO
10994
831 ftprad on 80 Tracks on Each Side - ISO Type 303 First Edition
ISO
10996
Photography - Still-Picture Projectors - Determination of Noise Emissions First Edition
ISO
10997
Passenger Vehicles - Side Impact with Deformable Moving Barrier - Full Scale Test First Edition
ISO
10998
Agricultural Wheeled Tractors - Steering Requirements First Edition
ISO
11001-1
Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 1: U-Frame Coupler First Edition
ISO
11001-2
Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 2: A-Frame Coupler First Edition
ISO
11001-3
Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 3: Link Coupler First Edition
ISO
11001-4
Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 4: Bar Coupler
Adhesives - Determination of Shear Behaviour of Structural Adhesives - Part 1: Torsion Test Method Using Butt-Bonded Hollow
ISO
11003-1
Cylinders Second Edition
Adhesives - Determination of Shear Behaviour of Structural Adhesives - Part 2: Tensile-Test Method Using Thick Adherends Second
ISO
11003-2
Edition
ISO
11007
Petroleum Products and Lubricants - Determination of Rust-Prevention Characteristics of Lubricating Greases First Edition
ISO
11009
Petroleum Products and Lubricants - Determination of Water Washout Characteristics of Lubricating Greases First Edition
ISO
11014-1
Safety Data Sheet for Chemical Products - Part 1: Content and Order of Sections First Edition
ISO
11016
Oil of Star Anise, Chinese Type (Illicium Verum Hook. F.) First Edition
ISO
11019
Oil of Roots of Lovage (Levisticum Officinale Koch) First Edition
ISO
11020
Oil of Turpentine, Iberian Type (Pinus Pinaster Sol.) First Edition
ISO
11021
Essential Oils - Determination of Water Content - Karl Fischer Method First Edition
Liquorice Extracts (Glycyrrhiza glabra L.) - Determination of Glycyrrhizic Acid Content - Method Using High-Performance Liquid
ISO
11023
Chromatography First Edition
Essential Oils - General Guidance on Chromatographic Profiles - Part 1: Preparation of Chromatographic Profiles for Presentation in
ISO
11024-1
Standards First Edition
Essential Oils - General Guidance on Chromatographic Profiles - Part 2: Utilization of Chromatographic Profiles of Samples of
ISO
11024-2
Essential Oils First Edition
Oil of Cassia, Chinese Type - Determination of Trans-Cinnamaldehyde Content - Gas Chromatographic Method on Capillary
ISO
11025
Columns First Edition
Pepper and Pepper Oleoresins - Determination of Pipeline Content - Method Using High-Performance Liquid Chromatography First
ISO
11027
Edition
Sensory Analysis - Identification and Selection of Descriptors for Establishing a Sensory Profile by a Multidimensional Approach First
ISO
11035
Edition
ISO
11036
Sensory Analysis - Methodology - Texture Profile First Edition
ISO
11037
Sensory Analysis - General Guidance and Test Method for Assessment of the Colour of Foods First Edition
ISO
11040-1
Prefilled Syringes - Part 1: Glass Cylinders for Dental Local Anaesthetic Cartridges First Edition
ISO
11040-2
Prefilled Syringes - Part 2: Plungers and Discs for Dental Local Anaesthetic Cartridges First Edition
ISO
11040-3
Prefilled Syringes - Part 3: Aluminium Caps for Dental Local Anaesthetic Cartridges First Edition
ISO
11040-4
Prefilled syringes ù Part 4: Glass barrels for injectables Second Edition
ISO
11040-5
Prefilled Syringes - Part 5: Plungers for Injectables Second Edition
Workplace Air - Determination of Particulate Arsenic and Arsenic Compounds and Arsenic Trioxide Vapour - Method by Hydride
ISO
11041
Generation and Atomic Absorption Spectrometry First Edition
ISO
11042-1
Gas Turbines - Exhaust Gas Emission - Part 1: Measurement and Evaluation First Edition
ISO
11042-2
Gas Turbines - Exhaust Gas Emission - Part 2: Automated Emission Monitoring First Edition
ISO
11043
Oil of Basil, Methyl Chavicol Type (Ocimum Basilicum L.) First Edition
Soil Quality - Determination of Cadmium, Cobalt, Copper, Lead, Manganese, Nickel and Zinc in Aqua Regia Extracts of Soil - Flame
ISO
11047
and Electrothermal Atomic Absorption Spectrometric Methods First Edition
ISO
11048
Soil Quality - Determination of Water-Soluble and Acid-Soluble Sulfate First Edition
ISO
11050
Wheat Flour and Durum Wheat Semolina - Determination of Impurities of Animal Origin First Edition
ISO
11051
Durum Wheat (Triticum Durum Desf.) - Specification First Edition
ISO
11052
Durum Wheat Flour and Semolina - Determination of Yellow Pigment Content First Edition
ISO
11054
Cutting tools - Designation of high-speed steel groups Second Edition
ISO
11055
Flywheels for Reciprocating Internal Combustion Engines - Installation Dimensions for Clutches First Edition
ISO
11056
Sensory Analysis - Methodology - Magnitude Estimation Method First Edition
Geotextiles and Geotextile-Related Products - Determination of Water Permeability Characteristics Normal to the Plane, Without
ISO
11058
Load First Edition
ISO
11064-1
Ergonomic Design of Control Centres - Part 1: Principles for the Design of Control Centres First Edition
ISO
11064-2
Ergonomic Design of Control Centres - Part 2: Principles for the Arrangement of Control Suites First Edition
ISO
11064-3
Ergonomic Design of Control Centres - Part 3: Control Room Layout First Edition; Technical Corrigendum 1: 02/01/2002
ISO
11064-6
Ergonomic design of control centres Part 6: Environmental requirements for control centres First Edition
ISO
11064-7
Ergonomic design of control centres Part 7: Principles for the evaluation of control centres First Edition
ISO
11070
Sterile Single-Use Intravascular Catheter Introducers First Edition
ISO
11072
Information Technology - Computer Graphics - Computer Graphics Reference Model First Edition
Health informatics Point-of-care medical device communication Part 20101: Application profiles Base standard First Edition; Co-
ISO
11073-20101
Copyrighted by IEEE
Health informatics Point-of-care medical device communication Part 30200: Transport profile Cable connected First Edition; Co-
ISO
11073-30200
Copyrighted by IEEE
Health informatics Point-of-care medical device communication Part 30300: Transport profile Infrared wireless First Edition; Co-
ISO
11073-30300
Copyrighted by IEEE
ISO
11074-1
Soil Quality - Vocabulary Part 1: Terms and Definitions Relating to the Protection and Pollution of the Soil First Edition
Soil Quality - Vocabulary - Part 2: Terms and Definitions Relating to Sampling Qualite Du Sol - Vocabulaire - Partie 2: Termes Et
ISO
11074-2
Definitions Relatifs A L'Echantillonnage First Edition
Soil Quality - Vocabulary - Part 4: Terms and Definitions Related to the Rehabilitation of Soils and Sites Qualite Du Sol - Vocabulaire -
ISO
11074-4
Partie 4: Termes Et Definitions Relatifs A La Rehabilitation Des Sols Et Sites First Edition
Soil quality ù Vocabulary TECHNICAL CORRIGENDUM 1 QualitÚ du sol ù Vocabulaire RECTIFICATIF TECHNIQUE 1 First Edition;
ISO
11074 CORR 1
Technical Corrigendum 1: 9/15/2006
ISO
11074
Soil quality ù Vocabulary QualitÚ du sol ù Vocabulaire First Edition
ISO
11075
Aircraft ù De-icing/anti-icing fluids ù ISO type I Second edition
ISO
11076
Aircraft Ground-based de-icing/antiicing methods with fluids Fourth Edition
ISO
11077
Aerospace - Self- Propelled De-Icing/ Anti-Icing Vehicles - Functional Requirements First Edition
ISO
11078
Aircraft ù De-icing/anti-icing fluids ù ISO types II, III and IV Second edition
ISO
11082
Certification Scheme for Welded Fabric for the Reinforcement of Concrete Structures First Edition
ISO
11083
Water Quality - Determination of Chromium(VI) - Spectrometric Method Using 1,5-Diphenyl- carbazide First Edition
ISO
11084-1
Graphic Technology - Register Systems for Photographic Materials, Foils and Paper - Part 1: Three-Pin Systems First Edition
Graphic technology Register systems for photographic materials, foils and paper Part 2: Register pin systems for plate making First
ISO
11084-2
Edition
ISO
11086
Gas Turbines - Vocabulary First Edition
ISO
11087
Alpine ski-bindings Retention devices Requirements and test methods Second Edition
ISO
11088
Assembly, adjustment and inspection of an alpine ski/binding/boot (SûBûB) system Fourth Edition
ISO
11089
Rubber, Raw Synthetic - Determination of Anti-Degradants by High-Performance Liquid Chromatography First Edition
Machine Tools - Test Conditions for Die Sinking Electro-Discharge Machines (EDM) - Terminology and Testing of Accuracy - Part 1:
ISO
11090-1
Single Column Machines (Cross Slide Table Type and Fixed Table Type) First Edition
Machine Tools - Test Conditions for Die Sinking Electro-Discharge Machines (EDM) - Terminology and Testing of Accuracy - Part 2:
ISO
11090-2
Two Column Machines (Slide-Head Type and Cross-Slide Table Type) First Edition
ISO
11091
Construction Drawings - Landscape Drawing Practice First Edition
Textiles - Physiological Effects - Measurement of Thermal and Water-Vapour Resistance under Steady-State Conditions (Sweating
ISO
11092
Guarded-Hotplate Test) First Edition; (CEN EN 31092:1993)
ISO
11093-1
Paper and Board - Testing of Cores - Part 1: Sampling First Edition
ISO
11093-2
Paper and Board - Testing of Cores - Part 2: Conditioning of Test Samples First Edition
ISO
11093-3
Paper and Board - Testing of Cores - Part 3: Determination of Moisture Content Using the Oven Drying Method First Edition
ISO
11093-4
Paper and Board - Testing of Cores - Part 4: Measurement of Dimensions First Edition
ISO
11093-5
Paper and Board - Testing of Cores - Part 5: Determination of Characteristics of Concentric Rotation First Edition
ISO
11093-6
Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method Second edition
ISO
11093-7
Paper and Board - Testing of Cores - Part 7: Determination of Flexural Modulus by the Three-Point Method First Edition
Paper and Board - Testing of Cores - Part 8: Determination of Natural Frequency and Flexural Modulus by Experimental Modal
ISO
11093-8
Analysis First Edition
ISO
11093-9
Paper and board Testing of cores Part 9: Determination of flat crush resistance Second Edition
Acoustics - Test Code for the Measurement of Airborne Noise Emitted by Power Lawn Mowers, Lawn Tractors, Lawn and Garden
ISO
11094
Tractors, Professional Mowers, and Lawn and Garden Tractors with Mowing Attachments First Edition
ISO
11095
Linear Calibration Using Reference Materials First Edition
ISO
11096
Road Vehicles Pedestrian Protection Impact Test Method for Pedestrian Thigh, Leg and Knee First Edition
ISO
11102-1
Reciprocating Internal Combustion Engines - Handle Starting Equipment - Part 1: Safety Requirements and Tests First Edition
Reciprocating Internal Combustion Engines - Handle Starting Equipment - Part 2: Method of Testing the Angle of Disengagement
ISO
11102-2
First Edition
ISO
11103
Space Data and Information Transfer Systems - Radio Metric and Orbit Data First Edition
ISO
11104
Space Data and Information Transfer Systems - Time Code Formats First Edition Second Edition
ISO
11105
Small Craft - Ventilation of Petrol Engine and/or Petrol Tank Compartments Second Edition
ISO
11106-1
Photography - Slide Trays for Projectors - Part 1: Straight Slide Tray, Open Type (European Design) First Edition
ISO
11106-2
Photography - Slide Trays for Projectors - Part 2: Straight Slide Tray, Closed Type (Japanese Design) First Edition
ISO
11108
Information and Documentation - Archival Paper - Requirements for Permanence and Durability First Edition
ISO
11110
Winter-Sports Equipment - Test Devices for the Setting of the Functional Unit Ski/Boot/Binding - Requirements and Tests First Edition
Textile machinery Safety requirements Part 1: Common requirements First Edition; ISO 11111-1 together with ISO 11111-2 , -3, -4, -
ISO
11111-1
5, -6, cancels and replaces ISO 11111:1995
Textile machinery Safety requirements Part 2: Spinning preparatory and spinning machines First Edition; ISO 11111-2 together with
ISO
11111-2
ISO 11111-1 , -3, -4, -5, -6, and -7, cancels and replaces ISO 11111:1995
Textile machinery Safety requirements Part 3: Nonwoven machinery First Edition; ISO 11111-3 together with ISO 11111-1 , -2, -4, -
ISO
11111-3
5, -6, and -7, cancels and replaces ISO 11111:1995
Textile machinery Safety requirements Part 4: Yarn processing, cordage and rope manufacturing machinery First Edition; ISO
ISO
11111-4
11111-3 together with ISO 11111-1 , -2, -3, -5, -6, and -7, cancels and replaces ISO 11111:1995
Textile machinery Safety requirements Part 5: Preparatory machinery to weaving and knitting MatÚriel pour l industrie textile First
ISO
11111-5
Edition; ISO 11111-5 together with ISO 11111-1 , -2, -3, -4, -6, and -7, cancels and replaces ISO 11111:1995
Textile machinery Safety requirements Part 6: Fabric manufacturing machinery First Edition; ISO 11111-6 together with ISO 11111-1
ISO
11111-6
, -2, -3, -4, -5, and -7, cancels and replaces ISO 11111:1995
Textile machinery Safety requirements Part 7: Dyeing and finishing machinery First edition; ISO 11111-7 together with ISO 11111-1, -
ISO
11111-7
2, -3, -4, -5, and -6 Cancels and Replaces ISO 11111:1995
ISO
11112
Earth-Moving Machinery - Operator s Seat - Dimensions and Requirements First Edition; Amendment 1: 03/01/2001
Transportable Gas Cylinders - Compatibilty of Cylinder and Valve Materials with Gas Contents - Part 1: Metallic Materials First
ISO
11114-1
Edition; Corrected and Reprinted 08/01/1999
Transportable Gas Cylinders - Compatibilty of Cylinder and Valve Materials with Gas Contents - Part 2: Non-Metallic Materials First
ISO
11114-2
Edition
Transportable Gas Cylinders - Compatibilty of Cylinder and Valve Materials with Gas Contents - Part 3: Autogenous Ignition Test in
ISO
11114-3
Oxygen Atmosphere First Edition; Corrected and Reprinted 08/01/1999
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting
ISO
11114-4
metallic materials resistant to hydrogen embrittlement First Edition
ISO
11116-1
Gas Cylinders - 17E Taper Thread for Connection of Valves to Gas Cylinders - Part 1: Specification First Edition
ISO
11116-2
Gas Cylinders - 17E Taper Thread for Connection of Valves to Gas Cylinders - Part 2: Inspection Gauges First Edition
Gas Cylinders - Valve Protection Caps and Valve Guards for Industrial and Medical Gas Cylinders - Design, Construction and Tests
ISO
11117
First Edition
ISO
11118
Gas Cylinders - Non-Refillable Metallic Gas Cylinders - Specification and Test Methods First Edition
Gas Cylinders of Composite Construction - Specification and Test Methods - Part 1: Hoop Wrapped Composite Gas Cylinders First
ISO
11119-1
Edition
Gas Cylinders of Composite Construction - Specification and Test Methods - Part 2: Fully Wrapped Fibre Reinforced Composite Gas
ISO
11119-2
Cylinders With Load-Sharing Metal Liners
Gas Cylinders of Composite Construction - Specification and Test Methods - Part 3: Fully Wrapped Fibre Reinforced Composite Gas
ISO
11119-3
Cylinders with Non-Load-Sharing Metallic or Non-Metallic Liners First Edition
Gas Cylinders - Refillable Seamless Steel Tubes of Water Capacity between 150 I and 3 000 I - Design, Construction and Testing
ISO
11120
First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning
ISO
11124-1
Abrasives - Part 1: General Introduction and Classification First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning
ISO
11124-2
Abrasives - Part 2: Chilled-Iron Grit First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning
ISO
11124-3
Abrasives - Part 3: High-Carbon Cast-Steel Shot and Grit First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning
ISO
11124-4
Abrasives - Part 4: Low-Carbon Cast-Steel Shot First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning
ISO
11125-1
Abrasives - Part 1: Sampling First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning
ISO
11125-2
Abrasives - Part 2: Determination of Partical Size Distribution First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning
ISO
11125-3
Abrasives - Part 3: Determination of Hardness First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning
ISO
11125-4
Abrasives - Part 4: Determination of Apparent Density First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning
ISO
11125-5
Abrasives - Part 5: Determination of Percentage Defective Particles and of Microstructure First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning
ISO
11125-6
Abrasives - Part 6: Determination of Foreign Matter First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning
ISO
11125-7
Abrasives - Part 7: Determination of Moisture First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning
ISO
11126-1
Abrasives - Part 1: General Introduction and Classification First Edition; Corrigendum 1-1997, Corrigendum 2-1997
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning
ISO
11126-3
Abrasives - Part 3: Copper Refinery Slag First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning
ISO
11126-4
Abrasives - Part 4: Coal Furnace Slag First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning
ISO
11126-5
Abrasives - Part 5: Nickel Refinery Slag First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning
ISO
11126-6
Abrasives - Part 6: Iron Furnace Slag First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning
ISO
11126-7
Abrasives - Part 7: Fused Aluminium Oxide First Edition; Technical Corrigendum: 02-15-1999
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning
ISO
11126-8
Abrasives - Part 8: Olivine Sand First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning
ISO
11126-9
Abrasives - Part 9: Staurolite First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning
ISO
11126-10
Abrasives - Part 10: Almandite Garnet First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning
ISO
11127-1
Abrasives - Part 1: Sampling First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning
ISO
11127-2
Abrasives - Part 2: Determination of Particle Distribution First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning
ISO
11127-3
Abrasives - Part 3: Determination of Apparent Density First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning
ISO
11127-4
Abrasives - Part 4: Assessment of Hardness by a Glass Slide Test First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning
ISO
11127-5
Abrasives - Part 5: Determination of Moisture First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning
ISO
11127-6
Abrasives - Part 6: Determination of Water- Soluble Contaminants by Conductivity Measurement First Edition
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning
ISO
11127-7
Abrasives - Part 7: Determination of Water- Soluble Chlorides First Edition
ISO
11130
Corrosion of Metals and Alloys - Alternate Immersion Test in Salt Solution First Edition
Medical Devices - Validation and Routine Control of Ethylene Oxide Sterilization First Edition; Corrigendum 1: 1994 [Refer To: AAMI
ISO
11135
TIR28]
Sterilization of health care products ù Ethylene oxide ù Part 1: Requirements for development, validation and routine control of a
ISO
11135-1
sterilization process for medical devices First Edition
Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization
ISO
11137-1
process for medical devices First Edition; Together with ISO 11137-2 and ISO 11137-3 supersedes ISO 11137:1995
Sterilization of health care products Radiation Part 2: Establishing the sterilization dose First Edition; Together with ISO 11137-1 and
ISO
11137-2
ISO 11137-3 supersedes ISO 11137:1995
Sterilization of health care products Radiation Part 3: Guidance on dosimetric aspects First Edition; Together with ISO 11137-1 and
ISO
11137-3
ISO 11137-2 supersedes ISO 11137:1995
ISO
11138-1
Sterilization of health care products Biological indicators Part 1: General requirements Second Edition
Sterilization of health care products Biological indicators Part 2: Biological indicators for ethylene oxide sterilization processes
ISO
11138-2
Second Edition
Sterilization of health care products Biological indicators Part 3: Biological indicators for moist heat sterilization processes Second
ISO
11138-3
Edition
ISO
11138-4
Sterilization of health care products Biological indicators Part 4: Biological indicators for dry heat sterilization processes First Edition
Sterilization of health care products Biological indicators Part 5: Biological indicators for low-temperature steam and formaldehyde
ISO
11138-5
sterilization processes First Edition
ISO
11140-1
Sterilization of health care products - Chemical indicators Part 1: General requirements Second Edition
ISO
11140-2
Sterilization of Health Care Products - Chemical Indicators - Part 2: Test Equipment and Methods First Edition
Sterilization of health care products ù Chemical indicators ù Part 3: Class 2 indicator systems for use in the Bowie and Dick-type
ISO
11140-3
steam penetration test Second Edition
Sterilization of health care products ù Chemical indicators ù Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type
ISO
11140-4
test for detection of steam penetration Second Edition
Sterilization of health care products ù Chemical indicators ù Part 5: Class 2 indicators for Bowie and Dicktype air removal tests
ISO
11140-5
Second Edition
Micrographics Colour microfilm Application of the exposure technique to prepare line originals and continuous-tone originals First
ISO
11142
Edition
ISO
11143
Dental Equipment - Amalgam Separators First Edition: Corrigendum 6/15/2002
ISO
11144
Dental Equipment - Connections for Supply and Waste Lines First Edition
Optics and photonics Lasers and laser-related equipment Vocabulary and symbols Optique et photonique Lasers et Úquipements
ISO
11145
associÚs aux lasers Vocabulaire et symboles Third Edition
Lasers and laser-related equipment Test methods for laser beam widths, divergence angles and beam propagation ratios Part 1:
ISO
11146-1
Stigmatic and simple astigmatic beams First Edition; Cancels and Replaces 11146:1999
Lasers and laser-related equipment Test methods for laser beam widths, divergence angles and beam propagation ratios Part 2:
ISO
11146-2
General astigmatic beams First edition
Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared
ISO
11151-1
Spectral Ranges First Edition
Lasers and Laser-Related Equipment - Standard Optical Components - Part 2: Components for the Infrared Spectral Ranges First
ISO
11151-2
Edition
ISO
11157
Road vehicles - Brake lining assemblies - Inertia dynamometer test method Second Edition
Lubricants, Industrial Oils and Related Products (Class L) - Family H (Hydraulic Systems) - Specifications for Categories HH, HL, HM,
ISO
11158
HR, HV and HG First Edition
Information Technology - Office Equipment - Minimum Information to Be Included in Specification Sheets - Copying Machines
ISO
11159
Second Edition; Corrected and Reprinted 03/01/1997
Information Technology - Office Equipment - Minimum Information to Be Included in Specification Sheets - Printers - Part 1: Class 1
ISO
11160-1
and Class 2 Printers First Edition
Information Technology - Office Equipment - Minimum Information to Be Included in Specification Sheets - Printers - Part 2: Class 3
ISO
11160-2
and Class 4 Printers First Edition
ISO
11161
Safety of machinery ù Integrated manufacturing systems ù Basic requirements SECOND EDITION
ISO
11162
Peppercorns (Piper Nigrum L.) in Brine - Specification and Test Methods First Edition
ISO
11163
Dried Sweet Basil (Ocimum Basilicum L.) - Specification First Edition
ISO
11164
Dried Rosemary (Rosmarinus Officinalis L.) - Specification First Edition
ISO
11165
Dried Sage (Salvia Officinalis L.) - Specification First Edition
ISO
11168
Socket Wrenches for Spark- and Glow-Plugs First Edition
Machinery for Forestry - Wheeled Special Machines - Vocabulary, Performance Test Methods and Criteria for Brake Systems First
ISO
11169
Edition
ISO
11170
Hydraulic fluid power Filter elements Sequence of tests for verifying performance characteristics Second edition
ISO
11171
Hydraulic Fluid Power - Calibration of Automatic Particle Counters for Liquids First Edition; Corrigendum 1: 10/1/2001
Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part
ISO
11172-1
1: Systems First Edition; CEN EN ISO/IEC 11172-1: 1995; AS/NZS 4230.1: 1994; Corrigendum 1: 1996; Corrigendum 2: 1999
Information technology Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s Part 2:
ISO
11172-2
Video First Edition; Corrigendum 1: 4/15/1996; Corrigendum 2: 12/1/1999; Corrigendum 3: 11/1/2003; Corrigendum 4: 08/15/2006
Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part
ISO
11172-3
3: Audio First Edition; CEN EN ISO/IEC 11172-3 1995; AS/NZS 4230.3: 1994; Corrigendum 1: 1996
Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part
ISO
11172-4 CORR 1
4: Compliance Testing
Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part
ISO
11172-4
4: Compliance Testing First Edition
ISO
11173
Thermoplastics Pipes - Determination of Resistance to External Blows - Staircase Method First Edition
Workplace Air - Determination of Particulate Cadmium and Cadmium Compounds - Flame and Electrothermal Atomic Absorption
ISO
11174
Spectrometric Method First Edition
ISO
11178
Star Anise (Llicium verum Hook. f.) - Specification First Edition
ISO
11179-1
Information technology Metadata registries (MDR) Part 1: Framework Second Edition
ISO
11179-2
Information technology Metadata registries (MDR) Part 2: Classification Second Edition
Information technology ù Metadata registries (MDR) ù Part 3: Registry metamodel and basic attributes TECHNICAL CORRIGENDUM
ISO
11179-3 CORR 1
1 Second Edition
ISO
11179-3
Information Technology - Metadata Registries (MDR) - Part 3: Registry Metamodel and Basic Attributes Second Edition
ISO
11179-4
Information technology Metadata registries (MDR) Part 4: Formulation of data definitions Second Edition
ISO
11179-5
Information technology Metadata registries (MDR) Part 5: Naming and identification principles Second Edition
ISO
11179-6
Information technology Metadata registries (MDR) Part 6: Registration Second Edition
ISO
11191
Gas Cylinders - 25E Taper Thread for Connection of Valves to Gas Cylinders - Inspection Gauges First Edition
ISO
11192
Small craft - Graphical symbols First Edition
Single-use medical examination gloves ù Part 1: Specification for gloves made from rubber latex or rubber solution AMENDMENT 1
ISO
11193-1 AMD 1
First Edition
Single-use medical examination gloves ù Part 1: Specification for gloves made from rubber latex or rubber solution TECHNICAL
ISO
11193-1 CORR 1
CORRIGENDUM 1 First Edition
ISO
11193-1
Single-use medical examination gloves ù Part 1: Specification for gloves made from rubber latex or rubber solution First Edition
Single-use medical examination gloves Part 2: Specification for gloves made from poly(vinyl chloride) First Edition; Cancels and
ISO
11193-2
Replaces ISO 11193:1994
ISO
11195
Gas Mixers for Medical Use - Stand-Alone Gas Mixers First Edition
ISO
11197
Medical supply units Second Edition
ISO
11199-1
Walking Aids Manipulated by Both Arms - Requirements and Test Methods - Part 1: Walking Frames First Edition
ISO
11199-2
Walking Aids Manipulated by Both Arms - Requirements and Test Methods - Part 2: Rollators Second edition
ISO
11199-3
Walking aids manipulated by both arms Requirements and test methods Part 3: Walking tables First Edition
Acoustics - Noise Emitted by Machinery and Equipment - Guidelines for the Use of Basic Standards for the Determination of
Emission Sound Pressure Levels at a Work Station and at Other Specified Positions First Edition; CEN EN ISO 11200: 1995;
ISO
11200
Corrigendum 1 02/01/1997
Acoustics - Noise Emitted by Machinery and Equipment - Measurement of Emission Sound Pressure Levels at a Work Station and at
Other Specified Positions - Engineering Method in an Essentially Free Field Over a Reflecting Plane First Edition; Replaces ISO
ISO
11201
6081; CEN EN ISO 11201-95; Corrigendum 1 02/15/1997
Acoustics - Noise Emitted by Machinery and Equipment - Measurement of Emission Sound Pressure Levels at a Work Station and at
ISO
11202
Other Specified Positions - Survey Method in Situ First Edition (CEN EN ISO 11202: 1995)
Acoustics - Noise Emitted by Machinery and Equipment - Determination of Emission Sound Pressure Levels at a Work Station and at
ISO
11203
Other Specified Positions from the Sound Power Level (CEN EN ISO 11204: 1995)
Acoustics - Noise Emitted by Machinery and Equipment - Measurement of Emission Sound Pressure Levels at a Work Station and at
Other Specified Positions - Method Requiring Environmental Corrections First Edition; CEN EN ISO 11204:1995; Corrigendum 1
ISO
11204
02/15/1997
Acoustics Noise emitted by machinery and equipment Engineering method for the determination of emission sound pressure levels
ISO
11205
in situ at the work station and at other specified positions using sound intensity First Edition
ISO
11210
Determination of Platinum Jewellery Alloys - Gravimetric Method After Precipitation of Diammonium Hexachloroplatinate First Edition
Starch and Derived Products - Heavy Metals Content - Part 1: Determination of Arsenic Content by Atomic Absorption Spectrometry
ISO
11212-1
First Edition
Starch and Derived Products - Heavy Metals Content - Part 2: Determination of Mercury Content by Atomic Absorption Spectrometry
ISO
11212-2
First Edition
Starch and Derived Products - Heavy Metals Content - Part 3: Determination of Lead Content by Atomic Absorption Spectrometry
ISO
11212-3
with Electrothermal Atomization First Edition
Starch and Derived Products - Heavy Metals Content - Part 4: Determination of Cadmium Content by Atomic Absorption
ISO
11212-4
Spectrometry with Electrothermal Atomization First Edition; Corrigendum 1 09-15-1997
ISO
11213
Modified Starch - Determination of Acetyl Content - Enzymatic Method First Edition; (EN ISO 11213:1995)
ISO
11214
Modified Starch - Determination of Carboxyl Group Content of Oxidized Starch First Edition CEN EN ISO 11 214: 1996
ISO
11215
Modified Starch - Determination of Adipic Acid Content of Acetylated Di-Starch Adipates - Gas Chromaographic Method First Edition
ISO
11216
Modified Starch - Determination of Content of Carboxymethyl Groups in Carboxymethyl Starch First Edition
ISO
11217
Aerospace - Hydraulic System Fluid Contamination - Location of Sampling Points and Criteria for Sampling First Edition
ISO
11218
Aerospace - Cleanliness Classification for Hydraulic Fluids First Edition
ISO
11222
Air quality Determination of the uncertainty of the time average of air quality measurements First Edition
Petroleum and liquid petroleum products Direct static measurements Measurement of content of vertical storage tanks by
ISO
11223
hydrostatic tank gauging First Edition
Textiles - Web Formation and Bonding in Nonwovens - Vocabulary Textiles - Formation et Liage du Voile Dans les Nontisses -
ISO
11224
Vocabulaire Second Edition
ISO
11226
Ergonomics Evaluation of static working postures First Edition; Technical Corrigendum 1: 05/01/2006
ISO
11228-1
Ergonomics Manual handling Part 1: Lifting and carrying First Edition
ISO
11228-2
Ergonomics ù Manual handling ù Part 2: Pushing and pulling First Edition
ISO
11228-3
Ergonomics ù Manual handling ù Part 3: Handling of low loads at high frequency First Edition
ISO
11234
Rubber Compounding Ingredients - Carbon Black (Pelletized) - Determination of Dust Content First Edition
ISO
11235
Rubber Compounding Ingredients - Sulfenamide Accelerators - Test Methods First Edition
Rubber compounding ingredients - p-Phenylenediamine (PPD) antidegradants - Test methods First Edition; Technical Corrigendum
ISO
11236
1: 02/15/2006
Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 1: Oil-based
ISO
11237-1
fluid applications First Edition
Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 2: Water-
ISO
11237-2
based fluid applications First Edition
ISO
11241
Aircraft - Aircraft Engine Transport Devices First Edition
ISO
11242
Aircraft - Pressure Equalization Requirements for Cargo Containers First Edition
ISO
11243
Cycles - Luggage Carriers for Bicycles - Concepts, Classification and Testing First Edition
ISO
11248
Plastics - Thermosetting Moulding Materials - Evaluation of Short-Term Performance at Elevated Temperatures First Edition
ISO
11252
Lasers and Laser-Related Equipment - Laser Device - Minimum Requirements for Documentation Second Edition
Lasers and Laser-Related Equipment - Determination of Laser-Induced Damage Threshold of Optical Surfaces - Part 1: 1-on-1 Test
ISO
11254-1
First Edition
Lasers and Laser-Related Equipment - Determination of Laser-Induced Damage Threshold of Optical Surfaces - Part 2: S-on-1 Test
ISO
11254-2
First Edition
Lasers and laser-related equipment Determination of laser-induced damage threshold of optical surfaces Part 3: Assurance of laser
ISO
11254-3
power (energy) handling capabilities First Edition
ISO
11256
Iron Ore Pellets - Determination of Clustering of Feedstock for Direct Reduction by Gas Reforming Processes First Edition
Iron Ores - Determination of Disintegration and Metallization of Feedstock for Direct Reduction by Gas Reforming Processes First
ISO
11257
Edition
Iron Ores - Determination of Reducibility and Metallization of Feedstock for Direct reduction by Gas Reforming Processes First
ISO
11258
Edition
ISO
11259
Soil Quality - Simplified Soil Description Qualite Du Sol - Decription Simplifiee Du Sol First Edition
Soil Quality - Determination of Effective Cation Exchange Capacity and Base Saturation Level Using Barium Chloride Solution First
ISO
11260
Edition; Corrigendum 1: 1996
ISO
11261
Soil Quality - Determination of Total Nitrogen - Modified Kjeldahl Method First Edition
ISO
11262
Soil quality Determination of cyanide First Edition
Soil Quality - Determination of Phosphorus - Spectrometric Determination of Phosphorus Soluble in Sodium Hydrogen Carbonate
ISO
11263
Solution First Edition
ISO
11264
Soil quality Determination of herbicides Method using HPLC with UV-detection First edition
ISO
11265
Soil Quality - Determination of the Specific Electrical Conductivity First Edition; Corrigendum 1: 1996
ISO
11266
Soil Quality - Guidance on Laboratory Testing for Biodegradation of Organic Chemicals in Soil Under Aerobic Conditions First Edition
ISO
11267
Soil Quality - Inhibition of Reproduction of Collembola (Folsomia Candida) by Soil Pollutants First Edition
Soil Quality - Effects of Pollutants on Earthworms (Eisenia Fetida) - Part 1: Determination of Acute Toxicity Using Artificial Soil
ISO
11268-1
Substrate First Edition
ISO
11268-2
Soil Quality - Effects of Pollutants on Earthworms (Eisenia Fetida) - Part 2: Determination of Effects on Reproduction First Edition
ISO
11268-3
Soil Quality - Effects of Pollutants on Earthworms - Part 3: Guidance on the Determination of Effects in Field Situations First Edition
Soil Quality - Determination of the Effects of Pollutants on Soil Flora - Part 1: Method for the Measurement of Inhibition of Root
ISO
11269-1
Growth First Edition
Soil quality Determination of the effects of pollutants on soil flora Part 2: Effects of chemicals on the emergence and growth of
ISO
11269-2
higher plants Second Edition
ISO
11271
Soil Quality - Determination of Redox Potential - Field Method First Edition
ISO
11272
Soil Quality - Determination of Dry Bulk Density First Edition
ISO
11274
Soil Quality - Determination of the Water-Retention Characteristics - Laboratory Methods First Edition
Soil quality Determination of unsaturated hydraulic conductivity and water-retention characteristic Wind s evaporation method First
ISO
11275
Edition
ISO
11276
Soil Quality - Determination of Pore Water Pressure - Tensiometer Method First Edition (BS 7755: SEC 5.1: 1996)
Soil Quality - Determination of Particle Size Distribution in Mineral Soil Material - Method by Sieving and Sedimentation First Edition;
ISO
11277
Technical Corrigendum 1: 03/01/2002
ISO
11285
Milk Determination of lactulose content Enzymatic method First Edition
ISO
11286
Tea Classification of grades by particle size analysis Second Edition
ISO
11289
Heat-Processed Foods in Hermetically Sealed Containers - Determination of pH First Edition
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Detection and Enumeration of Listeria Monocytogenes -
ISO
11290-1
Part 1: Detection Method First Edition; Amendment 1: 10/15/2004
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Detection and Enumeration of Listeria Monocytogenes -
ISO
11290-2
Part 2: Enumeration Method First Edition; Amendment 1: 10/15/2004
Instant Coffee - Determination of Free and Total Carbohydrate Contents - Method Using High-Performance Anion-Exchange
ISO
11292
Chromatography First Edition; Corrected and Reprinted 02-01-1997
Roasted Ground Coffee - Determination of Moisture Content - Method by Determination of Loss in Mass at 103 Degrees C (Routine
ISO
11294
Method) First Edition
ISO
11303
Corrosion of Metals and Alloys - Guidelines for Selection of Protection Methods Against Atmospheric Corrosion First Edition
ISO
11306
Corrosion of Metals and Alloys - Guidelines for Exposing and Evaluating Metals and Alloys in Surface Sea Water First Edition
ISO
11312
Photography - Sheets of Sensitized Material for the Pre-Press Industry - Dimensions and Related Requirements Second Edition
ISO
11315-1
Photography - Projection in indoor Rooms - Part 1: Screen Illumination Test for Still Projectors First Edition
ISO
11315-2
Photography - Projection in indoor Rooms - Part 2: Screen Illuminance Test for Still and Video Projection First Edition
ISO
11318
Cardiac Defibrillators - Connector Assembly DF-1 for Implantable Defibrillators - Dimensional and Test Requirements Second Edition
ISO
11319
Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording First Edition
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DATA/DAT
ISO
11321
Format First Edition
ISO
11323
Iron Ore and Direct Reduced Iron - Vocabulary Second Edition
ISO
11329
Hydrometric Determinations - Measurement of Suspended Sediment Transport in Tidal Channels Second Edition
ISO
11334-1
Assistive products for walking manipulated by one arm ù Requirements and test methods ù Part 1: Elbow crutches Second Edition
Walking Aids Manipulated by One Arm - Requirements and Test Methods - Part 4: Walking Sticks with Three or More Legs First
ISO
11334-4
Edition
ISO
11337
Plastics Polyamides Determination of e-caprolactam and w-laurolactam by gas chromatography First Edition
Stationary source emissions Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 1: Sampling First
ISO
11338-1
Edition
Stationary source emissions Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 2: Sample preparation,
ISO
11338-2
clean-up and determination First Edition
ISO
11339
Adhesives - T-Peel Test for Flexible-to-Flexible Bonded Assemblies Second Edition
Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-Arc Radiation Second
ISO
11341
Edition
Mechanical Vibration - Methods and Criteria for the Mechanical Balancing of Flexible Rotors Second Edition; Corrigendum 1: 06-01-
ISO
11342
2000
Adhesives - Determination of Dynamic Resistance to Cleavage of High Strength Adhesive Bonds Under Impact Conditions - Wedge
ISO
11343
Impact Method Second Edition
Rubber, raw synthetic Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography First
ISO
11344
Edition
ISO
11345
Rubber Assessment of carbon black and carbon black/silica dispersion Rapid comparative methods Second Edition
ISO
11346
Rubber, vulcanized or thermoplastic Estimation of life-time and maximum temperature of use Second Edition
Water Quality - Determination of the Inhibitory Effect of Water Samples on the Light Emission of Vibrio Fischeri (Luminescent
ISO
11348-1
Bacteria Test) - Part 1: Method Using Freshly Prepared Bacteria First Edition
Water Quality - Determination of the Inhibitory Effect of Water Samples on the Light Emission of Vibrio Fischeri (Luminescent
ISO
11348-2
Bacteria Test) - Part 2: Method Using Liquid-Dried Bacteria First Edition
Water Quality - Determination of the Inhibitory Effect of Water Samples on the Light Emission of Vibrio Fischeri (Luminescent
ISO
11348-3
Bacteria Test) - Part 3: Method Using Freeze-Dried Bacteria First Edition
ISO
11357-1
Plastics - Differential Scanning Calorimetry (DSC) - Part 1: General Principles First Edition
ISO
11357-2
Plastics - Differential Scanning Calorimetry (DSC) - Part 2: Determination of Glass Transition Temperature First Edition
Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO
11357-3
First Edition; Amendment 1: 07/2005
ISO
11357-4
Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity First Edition
Plastics - Differential Scanning Calorimetry (DSC) - Part 5: Determination of Characteristic Reaction-Curve Temperatures and Times,
ISO
11357-5
Enthalpy of Reaction and Degree of Conversion First Edition
ISO
11357-6 AMD 1
Plastics ù Differential scanning calorimetry (DSC) ù Part 6: Determination of oxidation induction time AMENDMENT 1 First Edition
ISO
11357-6
Plastics - Differential Scanning Calorimetry (DSC) - Part 6: Determination of Oxidation Induction Time First Edition
ISO
11357-7
Plastics - Differential Scanning Calorimetry (DSC) - Part 7: Determination of Crystallization Kinetics First Edition
ISO
11358
Plastics - Thermogravimetry (TG) of Polymers - General Principles First Edition
ISO
11358-2
Plastics Thermogravimetry (TG) of polymers Part 2: Determination of activation energy First Edition
ISO
11359-1
Plastics - Thermomechanical Analysis (TMA) - Part 1: General Principles First Edition
Plastics - Thermomechanical Analysis (TMA) - Part 2: Determination of Coefficient of Linear Thermal Expansion and Glass Transition
ISO
11359-2
Temperature First Edition
ISO
11359-3
Plastics - Thermomechanical Analysis (TMA) - Part 3: Determination of Penetration Temperature First Edition
Water Quality - Determination of Selected Plant Treatment Agents - Method Using High Performance Liquid Chromatography with UV
ISO
11369
Detection After Solid-Liquid Extraction First Edition
ISO
11372
Gas cylinders Cylinders for dissolved acetylene Inspection at time of filling Second Edition
ISO
11375
Building Construction Machinery and Equipment - Terms and Definitions First Edition
ISO
11377
Textile Floor Coverings - Floor Soiling - Test Site Set-Up and Soiling Evaluation First Edition
ISO
11378-1
Textile Floor Coverings- Laboratory Soiling Tests - Part 1: Kappasoil Test First Edition
ISO
11378-2
Textile Floor Coverings - Laboratory Soiling Tests - Part 2: Drum Test First Edition
ISO
11379
Textile Floor Coverings - Laboratory Cleaning Procedure Using Spray Extraction First Edition
ISO
11380
Optics and Optical Instruments - Ophthalmic Optics - Formers First Edition
ISO
11381
Optics and Optical Instruments - Ophthalmic Optics - Screw Threads First Edition
Protective Clothing for Users of Hand-Held Chain-Saws - Part 1: Test Rig Driven by a Flywheel for Testing Resistance to Cutting by a
ISO
11393-1
Chain-Saw First Edition
Protective Clothing for Users of Hand-Held Chain-Saws - Part 2: Test Methods and Performance Requirements for Leg Protectors
ISO
11393-2
First Edition
ISO
11393-3
Protective Clothing for Users of Hand-Held Chain-Saws - Part 3: Test Methods for Footwear First Edition
Protective clothing for users of hand-held chain-saws Part 4: Test methods and performance requirements for rotective gloves First
ISO
11393-4
Edition
Protective Clothing for Users of Hand-Held Chain-Saws - Part 5: Test Methods and Performance Requirements for Protective Gaiters
ISO
11393-5
First Edition
Protective clothing for users of hand-held chain-saws ù Part 6: Test methods and performance requirements for upper body
ISO
11393-6
protectors First Edition
ISO
11399
Ergonomics of the Thermal Environment - Principles and Application of Relevant International Standards First Edition
Nickel, Ferronickel and Nickel Alloys - Determination of Phosphorus Content - Phosphovanadomolybdate Molecular Absorption
ISO
11400
Spectrometric Method First Edition
ISO
11401
Plastics - Phenolic Resins - Separation by Liquid Chromatography First Edition
ISO
11402
Phenolic, amino and condensation resins Determination of free- formaldehyde content Second Edition;
ISO
11403-1
Plastics - Acquisition and Presentation of Comparable Multipoint Data - Part 1: Mechanical Properties Second Edition
ISO
11403-2
Plastics Acquisition and presentation of comparable multipoint data Part 2: Thermal and processing properties Second Edition
ISO
11403-3
Plastics - Acquisition and Presentation of Comparable Multipoint Data - Part 3: Environmental Influences on Properties First Edition
Information Technology - Programming Languages, Their Environments and System Software Interfaces - Language-Independent
ISO
11404
Datatypes First Edition
ISO
FDIS 11404
Information technology ù General- Purpose Datatypes (GPD)
Commercial Road Vehicles - Mechanical Coupling between Towing Vehicles with Rear-Mounted Coupling and Drawbar Trailers -
ISO
11406
Interchangeability Second Edition; Corrigendum 1: 1/15/2005
Commercial road vehicles Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle
ISO
11407
trailers Interchangeability Second Edition
ISO
11408
Chemical Conversion Coatings - Black Oxide Coating on Iron and Steel - Specification and Test Methods First Edition
ISO
11409
Plastics - Phenolic Resins - Determination of Heats and Temperatures of Reaction by Differential Scanning Calorimetry First Edition
ISO
11411
Information Technology - Representation for Human Communication of State Transition of Software First Edition
ISO
11412
Carbonaceous Materials for the Production of Aluminium - Calcined Coke - Determination of Water Content First Edition
Plastics Pipes and Fittings - Preparation of Test Piece Assemblies between a Polyethylene (PE) Pipe and an Electrofusion Fitting
ISO
11413
First Edition
Plastics Pipes and Fittings - Preparation of Polyethylene (PE) Pipe/Pipe or Pipe/ Fitting Test Piece Assemblies by Butt Fusion First
ISO
11414
Edition
ISO
11415
Tools for Pressing - Die Sets First Edition
ISO
11416
Tennis Rackets - Racket Components and Physical Parameters First Edition
ISO
11418-1
Containers and accessories for pharmaceutical preparations Part 1: Drop-dispensing glass bottles Second edition
ISO
11418-2
Containers and accessories for pharmaceutical preparations Part 2: Screw-neck glass bottles for syrups Second edition
Containers and accessories for pharmaceutical preparations Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage
ISO
11418-3
forms Second edition
ISO
11418-4
Containers and accessories for pharmaceutical preparations Part 4: Tablet glass bottles Second edition
ISO
11418-5
Containers and Accessories for Pharmaceutical Preparations - Part 5: Dropper Assemblies First Edition
Containers and Accessories for Pharmaceutical Preparations - Part 7: Screw-Neck Vials Made of Glass Tubing for Liquid Dosage
ISO
11418-7
Forms First Edition
ISO
11421
Optics and Optical Instruments - Accuracy of Optical Transfer Function (OTF) Measurement First Edition;
ISO
11423-1
Water Quality - Determination of Benzene and Some Derivatives - Part 1: Head-Space Gas Chromatographic Method First Edition
Water Quality - Determination of Benzene and Some Derivatives - Part 2: Method Using Extration and Gas Chromatography First
ISO
11423-2
Edition
ISO
11424
Rubber Hoses and Tubing for Air and Vacuum Systems for Internal- Combustion Engines - Specification First Edition
ISO
11425
Rubber Hoses and Hose Assemblies for Automobile Power- Steering Systems - Specification First Edition
ISO
11426
Determination of Gold in Gold Jewellery Alloys - Cupellation Method (Fire Assay) Second Edition
Determination of Silver in Silver Jewellery Alloys - Volumetric (Potentiometric) Method Using Potassium Bromide (CEN EN
ISO
11427
31427:1994); (DINE EN 31427:1995) First Edition; Corrigendum 1: 1994
ISO
11428
Ergonomics - Visual Danger Signals - General Requirements, Design and Testing First Edition
ISO
11429
Ergonomics - System of Auditory and Visual Danger and Information Signals First Edition
Building Construction - Jointing Products - Determination of Adhesion/Cohesion Properties of Sealants After Exposure to Heat, Water
ISO
11431
and Artificial Light Through Glass Second Edition
ISO
11432
Building construction - Sealants - Determination of resistance to compression Second Edition
ISO
11433
Nickel Alloys - Determination of Titanium Content - Diantipyrylmethane Molecular Absorption Spectrometric Method First Edition
ISO
11435
Nickel alloys Determination of molybdenum Inductively coupled plasma atomic emission spectrometric method First Edition
ISO
11436
Nickel and Nickel Alloys - Determination of Total Boron Content - Curcumin Molecular Absorption Spectrometric Method First Edition
Nickel Alloys - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 1: General
ISO
11437-1
Requirements and Sample Dissolution First Edition
Nickel Alloys - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 2:
ISO
11437-2
Determination of Lead Content First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 1: General
ISO
11438-1
Requirements and Sample Dissolution First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 2:
ISO
11438-2
Determination of Lead Content First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 3:
ISO
11438-3
Determination of Antimony Content First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 4:
ISO
11438-4
Determination of Tin Content First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 5:
ISO
11438-5
Determination of Tellurium Content First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 6:
ISO
11438-6
Determination of Thallium Content First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 7:
ISO
11438-7
Determination of Silver Content First Edition
Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method - Part 8:
ISO
11438-8
Determination of Indium Content First Edition
ISO
11439
Gas Cylinders - High Pressure Cylinders for the On-Board Storage of Natural Gas as a Fuel for Automotive Vehicles First Edition
Lead Sulfide Concentrates - Determination of Lead Content - Back Titration of EDTA After Precipitation of Lead Sulfate First Edition;
ISO
11441
(Corrected and Reprinted - 1995) (SAA AS 4030.2: 1996)
ISO
11442
Technical product documentation Document management First Edition; Replaces ISO 11442-1 thru ISO 11442-5 and ISO/TR 10623
ISO
11443
Plastics - Determination of the Fluidity of Plastics Using Capillary and Slit-Die Rheometers Second edition
Road vehicles Connectors for the electrical connection of towing and towed vehicles 13-pole connectors for vehicles with 12 V
ISO
11446
nominal supply voltage Third Edition
ISO
11448
Powered Shredders and Chippers - Definitions, Safety Requirements and Test Procedures First Edition
ISO
11449
Walk-Behind Powered Rotary Tillers - Definitions, Safety Requirements and Test Procedures First Edition
ISO
11450
Equipment for Harvesting and Conservation - Round Balers - Terminology and Commercial Specifications First Edition
Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General
ISO
11451-1
principles and terminology Third edition
Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Off-vehicle
ISO
11451-2
radiation sources Third edition
Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board
ISO
11451-3
transmitter simulation Second Edition
Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk
ISO
11451-4
current injection (BCI) Second Editon
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1:
ISO
11452-1
General principles and terminology Third Edition
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2:
ISO
11452-2
Absorber-lined shielded enclosure Second Edition
Road Vehicles - Component Test Methods for Electrical Disturbances from Narrowband Radiated Electromagnetic Energy - Part 3:
ISO
11452-3
Transverse Electromagnetic (TEM) Cell Second Edition
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk
ISO
11452-4
current injection (BCI) Third edition
Road Vehicles - Component Test Methods for Electrical Disturbances from Narrowband Radiated Electromagnetic Energy - Part 5:
ISO
11452-5
Stripline Second Edition
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 7: Direct
ISO
11452-7
radio frequency (RF) power injection Second Edition
Road vehicles ù Component test methods for electrical disturbances from narrowband radiated electromagnetic energy ù Part 8:
ISO
11452-8
Immunity to magnetic fields First Edition
Statistical Interpretation of Data - Tests and Confidence Intervals Relating to Proportions First Edition; Technical Corrigendum 1: 09-
ISO
11453
01-1999
ISO
11455
Raw Optical Glass - Determination of Birefringence First Edition
ISO
11458
Information Technology - Microprocessor Systems - VICbus - Inter-Crate Cable Bus First Edition; Amendment 1 07-2000
ISO
11459
Iron Ores - Certified Reference Materials - Preparation and Certification for Use in Chemical Analysis First Edition
ISO
11460
Two-wheeled motorcycles ù Positioning of lighting and light-signalling devices Second edition
ISO
11461
Soil Quality - Determination of Soil Water Content as a Volume Fraction Using Coring Sleeves - Gravimetric Method First Edition
ISO
11462-1
Guidelines for Implementation of Statistical Process Control (SPC) - Part 1: Elements of SPC First Edition
ISO
11463
Corrosion of Metals and Alloys - Evaluation of Pitting Corrosion First Edition
ISO
11464
Soil quality Pretreatment of samples for physico-chemical analysis Second Edition
Soil Quality - Determination of Dry Matter and Water Content on a Mass Basis - Gravimetric Method First Edition; Corrigendum 1:
ISO
11465
1994
ISO
11466
Soil Quality - Extraction of Trace Elements Soluble in Aqua Regia First Edition
ISO
11468
Plastics - Preparation of PVC Pastes for Test Purposes - Dissolver Method First Edition
ISO
11469
Plastics - Generic Identification and Marking of Plastic Products Second Edition
ISO
11471
Agricultural Tractors and Machinery - Coding of Remote Hydraulic Power Services and Controls First Edition
Corrosion of Metals and Alloys - Corrosion Tests in Artificial Atmosphere - Accelerated Outdoor Test by Intermittent Spraying of a Salt
ISO
11474
Solution (Scab Test) First Edition
ISO
11475
Paper and Board - Determination of CIE Whiteness, D65/10 Degree (Outdoor Daylight) Second Edition
ISO
11476
Paper and Board - Determination of CIE Whiteness, C/2 Degree (Indoor Illumination Conditions) First Edition
ISO
11480
Pulp, Paper and Board - Determination of Total Chlorine and Organically Bound Chlorine First Edition
ISO
11482
Guidelines for Plutonium Dioxide (PuO2) Sampling in a Nuclear Reprocessing Plant First Edition
Nuclear fuel technology Preparation of plutonium sources and determination of 238Pu/239Pu isotope ratio by alpha spectrometry
ISO
11483
Second Edition
ISO
11484
Steel Tubes for Pressure Purposes - Qualification and Certification of Non-Destructive Testing (NDT) Personnel First Edition
ISO
11486
Motorcycles Methods for setting running resistance on a chassis dynamometer Second Edition
Determination of Platinum in Platinum Jewellery Alloys - Gravimetric Determination by Reduction with Mercury(I) Chloride First
ISO
11489
Edition
ISO
11490
Determination of Palladium in Palladium Jewellery Alloys - Gravimetric Determination with Dimethylglyoxime First Edition
Seamless and Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing of Tube Ends for the Detection of Laminar
ISO
11496
Imperfections First Edition
ISO
11497
Telemark Skis and Bindings - Binding Mounting Area - Requirements and Test Methods First Edition
ISO
11498
Dental Handpieces - Dental Low-Voltage Electrical Motors First Edition
ISO
11499
Dentistry ù Single-use cartridges for local anaesthetics Second Edition
Hydraulic Fluid Power - Determination of Particulate Contamination by Automatic Counting Using the Light Extinction Principle First
ISO
11500
Edition; Corrigendum 1-1998
ISO
11501
Plastics - Film and Sheeting - Determination of Dimensional Change on Heating First Edition
ISO
11502
Plastics - Film and Sheeting - Determination of Blocking Resistance First Edition
ISO
11503
Paints and Varnishes - Determination of Resistance to Humidity (Intermittent Condensation) First Edition
ISO
11507
Paints and varnishes ù Exposure of coatings to artificial weathering ù Exposure to fluorescent UV lamps and water Second edition
ISO
11508
Soil Quality - Determination of Particle Density First Edition
ISO
11512
Machinery for Forestery - Tracked Special Machines - Performance Criteria for Brake Systems First Edition
Information Technology - High-Performance Parallel Interface - Part 1: Mechanical, Electrical and Signalling Protocol Specification
ISO
11518-1
(HIPPI-PH) First Edition
ISO
11518-2
Information Technology - High-Performance Parallel Interface - Part 2: Framing Protocol (HIPPI-FP) Second Edition
Information Technology - High-Performance Parallel Interface - Part 3: Encapsulation of ISO/IEC 8802-2 (IEEE Std 802.2) Logical
ISO
11518-3
Link Control Protocol Data Units (HIPPI-LE) First Edition
Information Technology - High-Performance Parallel Interface - Part 6: Physical Switch Control (HIPPI-SC) First Edition Second
ISO
11518-6
Edition
Information Technology - High-Performance Parallel Interface Part 8: Mapping to Asynchronous Transfer Mode (HIPPI-ATM) First
ISO
11518-8
Edition
ISO
11518-9
Information Technology - High-Performance Parallel Interface - Part 9: Serial Specification (HIPPI-Serial) First Edition
ISO
11518-10
Information Technology - High-Performance Parallel Interface - Part 10: 6 400 Mbit/s Physical Layer (HIPPI-6400-PH) First Edition
ISO
11519-1
Road Vehicles - Low-Speed Serial Data Communication - Part 1: General and Definitions First Edition
ISO
11519-3
Road Vehicles - Low-Speed Serial Data Communication - Part 3: Vehicle Area Network (VAN) First Edition; Amendment 1: 1995
ISO
11520-1
Agricultural Grain Driers - Determination of Drying Performance - Part 1: General First Edition
Agricultural Grain Driers - Determination of Drying Performance - Part 2: Additional Procedures and Crop-Specific Requirements First
ISO
11520-2
Edition
ISO
11529-1
Milling Cutters - Designation - Part 1: Shank-type end mills of solid or tipped design Second Edition
Milling Cutters - Designation - Part 2: Shank-type and bore-type milling cutters with indexable inserts Second Edition; Replaces ISO
ISO
11529-2
7848: 1986
ISO
11530
Road Vehicles - Hydraulic Jacks - Specifications First Edition
ISO
11531
Metallic Materials - Earing Test First Edition
ISO
11533
Iron Ores - Determination of Cobalt Content - Flame Atomic Absorption Spectrometric Method First Edition
ISO
11534
Iron ores Determination of tin Flame atomic absorption spectrometric method Second Edition
ISO
11535
Iron ores Determination of various elements Inductively coupled plasma atomic emission spectrometric method Second Edition
ISO
11537
Non-Destructive Testing - Thermal Neutron Radiographic Testing - General Principles and Basic Rules First Edition
ISO
11540
Caps for Writing and Marking Instruments Intended for Use by Children Up to 14 Years of Age - Safety Requirements First Edition
ISO
11541
Natural Gas - Determination of Water Content at High Pressure First Edition
Plastics - Ultra-High- Molecular-Weight Polyethylene (PE-UHMW) Moulding and Extrusion Materials - Part 1: Designation System and
ISO
11542-1
Basis for Specifications Second Edition
Plastics ù Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials ù Part 2: Preparation of test
ISO
11542-2 CORR 1
specimens and determination of properties TECHNICAL CORRIGENDUM 1 First Edition
Plastics - Ultra-High-Molecular-Weight Polyethylene (PE-UHMW) Moulding and Extrusion Materials - Part 2: Preparation of Test
ISO
11542-2
Specimens and Determination of Properties First Edition
Modified Starch - Determination of Hydroxypropyl Content - Method Using Proton Nuclear Magnetic Resonance (NMR) Spectrometry
ISO
11543
First Edition
Information Technology - Coded Representation of Picture and Audio Information - Progressive Bi-Level Image Compression First
ISO
11544
Edition; Corrigendum 2 - 12/15/2001
Agricultural Irrigation Equipment - Centre-Pivot and Moving Lateral Irrigation Machines with Sprayer or Sprinkler Nozzles -
ISO
11545
Determination of Uniformity of Water Distribution Second Edition
Acoustics - Determination of Sound Insulation Performances of Enclosures - Part 1: Measurements Under Laboratory Conditions (for
ISO
11546-1
Declaration Purposes) First Edition (CEN EN ISO 11546-1: 1995)
Acoustics - Determination of Sound Insulation Performances of Enclosures - Part 2: Measurements in Situ (for Acceptance and
ISO
11546-2
Verification Purposes) First Edition (CEN EN ISO 11546-2: 1995)
ISO
11547
Small Craft - Start- in-Gear Protection First Edition (CEN EN ISO 11547: 1995)
Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Method for Absorptance of Optical Laser Components
ISO
11551
Second Edition
Safety of machinery Laser processing machines Part 1: General safety requirements First Edition; Cancels and Replaces ISO
ISO
11553-1
11553:1996,
Safety of machinery ù Laser processing machines ù Part 2: Safety requirements for hand-held laser processing devices First Edition
ISO
11553-2
[Superseded: ISO 11553]
Optics and photonics Lasers and laser-related equipment Test methods for laser beam power, energy and temporal characteristics
ISO
11554
Third Edition
ISO
11555-1
Road vehicles Stabilizing devices for caravans and light trailers Part 1: Integrated stabilizers First Edition
ISO
11556
Paper and board - Determination of curl using a single vertically suspended test piece Second Edition
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DDS-DC
ISO
11557
Format Using 60 m and 90 m Length Tapes First Edition
Information Technology - Data Compression for Information Interchange - Adaptive Coding with Embedded Dictionary - DCLZ
ISO
11558
Algorithm First Edition
ISO
11559
Information Technology - Data Interchange on 12,7 mm Wide 18-Track Magnetic Tape Cartridges - Extended Format First Edition
Information Technology - Information Interchange on 130 mm Optical Disk Cartridges Using the Magneto-Optical Effect, for Write
ISO
11560
Once, Read Multiple Functionality First Edition
Ageing of Thermal Insulation Materials - Determination of the Long-Term Change in Thermal Resistance of Closed-Cell Plastics
ISO
11561
(Accelerated Laboratory Test Methods) First Edition
Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Metrological Characteristics of Phase Correct Filters
ISO
11562
First Edition; Technical Corrigendum 1-1998
ISO
11563
Crude Petroleum and Petroleum Products - Bulk Cargo Transfer - Guidelines for Achieving the Fullness of Pipelines First Edition
Stationary Source Emissions - Determination of the Mass Concentration of Nitrogen Oxides - Naphthylethylenediamine Photometric
ISO
11564
Method First Edition; Corrigendum 1 04/01/2000
ISO
11565 CORR 1
Road Vehicles - Spark-Plugs - Test Methods and Requirements
ISO
11565
Road Vehicles - Spark-Plugs - Test Methods and Requirements Second Edition
ISO
11566
Carbon Fibre - Determination of the Tensile Properties of Single-Filament Specimens First Edition
ISO
11567
Carbon Fibre - Determination of Filament Diameter and Cross-Sectional Area First Edition
ISO
11568-1
Banking Key management (retail) Part 1: Principles Second Edition
Banking - Key Management (retail) - Part 2: Symmetric ciphers, their key management and life cycle Second Edition; Cancels and
ISO
11568-2
replaces ISO 11568-3:1994
ISO
11568-4
Banking - Key Management (Retail) - Part 4: Asymmetric cryptosystems ù Key management and life cycle Second Edition
ISO
11568-5
Banking - Key Management (Retail) - Part 5: Key Life Cycle for Public Key Cryptosystems First Edition
Information Technology - Telecommunications and Information Exchange Between Systems - 26-Pole Interface Connector
ISO
11569
Mateability Dimensions and Contact Number Assignments First Edition; AS/NZS 4244: 1994
Information Technology - Telecommunications and Information Exchange Between Systems - Open Systems Interconnection -
ISO
11570
Transport Protocol Identification Mechanism First Edition; AS/NZS 4245: 1994
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Networks -
ISO
11571
Addressing Second Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network -
ISO
11572
Circuit Mode Bearer Services - Inter-Exchange Signalling Procedures and Protocol Third Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Synchronization Methods and
ISO
11573
Technical Requirements for Private Integrated Services Networks First Edition; AS/NZS 4138: 1995
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network -
ISO
11574
Circuit-Mode 64 kbit/s Bearer Services - Service Description, Functional Capabilities and Information Flows Second Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Protocol Mappings for the OSI Data
ISO
11575
Link Service First Edition
ISO
11576
Information Technology - Procedure for the Registration of Algorithms for the Lossless Compression of Data First Edition
ISO
11577
Information Technology - Open Systems Interconnection - Network Layer Security Protocol First Edition
ISO
11578
Information Technology - Open Systems Interconnection - Remote Procedure Call (RPC) First Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network -
ISO
11579-1
Part 1: Reference Configuration for PISN Exchanges (PINX) First Edition; (ETSI ETS 300 475-1: 1995) (Corrigendum 1-1996)
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network -
ISO
11579-2
Part 2: Reference Configuration for HS-PISN Exchanges (HS-PINX) First Edition
Information Technology - Private Integrated Services Network - Part 3: Reference Configuration for PINX Extension Lines First
ISO
11579-3
Edition
ISO
11581-1
Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 1: Icons - General First Edition
ISO
11581-2
Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 2: Object Icons Fisrt Edition
ISO
11581-3
Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 3: Pointer First Edition
ISO
11581-5
Information technology User system interfaces and symbols Icon symbols and functions Part 5: Tool icons First Edition
ISO
11581-6
Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 6: Action Icons First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network -
Generic Functional Protocol for the Support of Supplementary Services - Inter-Exchange Signalling Procedures and Protocols
ISO
11582
Second Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network -
ISO
11584
Circuit-Mode Multi-Rate Bearer Services - Service Description, Functional Capabilities and Information Flows First Edition
Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Overview, Models and Notation First
ISO
11586-1
Edition
Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Security Exchange Service Element
ISO
11586-2
(SESE) Service Definition First Edition
Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Security Exchange Service Element
ISO
11586-3
(SESE) Protocol Specification First Edition
Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Protecting Transfer Syntax Specification
ISO
11586-4
First Edition
Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Security Exchange Service Element
ISO
11586-5
(SESE) Protocol Implementation Conformance Statement (PICS) Proforma First Edition
Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Protecting Transfer Syntax Protocol
ISO
11586-6
Implementation Conformance Statement (PICS) Proforma First Edition
Information Technology - Open Systems Interconnection - Application Context for Systems Management with Transaction Processing
ISO
11587
First Edition
ISO
11591
Small Craft, Engine-Driven - Field of Vision from Helm Position First Edition
ISO
11592
Small craft Less than 8 m Lengh of Hull - Determination of Maximum Propulsion Power Rating First Edition
Manipulating Industrial Robots - Automatic End Effector Exchange Systems - Vocabulary and Presentation of Characteristics First
ISO
11593
Edition
ISO
11599
Determination of Gas Porosity and Gas Permeability of Hydraulic Binders Containing Embedded Radioactive Waste First Edition
ISO
11600
Building Construction - Jointing Products - Classification and Requirements for Sealants Second Edition
ISO
11601
Wheeled Fire Extinguishers - Performance and Construction First Edition
ISO
11602-1
Fire Protection - Portable and Wheeled Fire Extinguishers - Part 1: Selection and Installation First Edition
ISO
11602-2
Fire Protection - Portable and Wheeled Fire Extinguishers - Part 2:Inspection and Maintenance First Edition
ISO
11605
Paper and Board - Calibration of Variable-Area Flowmeters First Edition
ISO
11606
Ships and Marine Technology - Marine Electromagnetic Compasses Second Edition; Corrigendum 1: 2/1/2005
Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging
ISO
11607-1
systems First edition; ISO 11607-1 and ISO 11607-2 cancel and replace ISO 11607:2003
Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes First
ISO
11607-2
edition; ISO 11607-1 and ISO 11607-2 cancel and replace ISO 11607:2003
ISO
11608-1
Pen-Injectors for Medical Use - Part 1: Pen-Injectors - Requirements and Test Methods First Edition
ISO
11608-2
Pen-Injectors for Medical Use - Part 2: Needles - Requirements and Test Methods First Edition
ISO
11608-3
Pen-Injectors for Medical Use - Part 3: Finished Cartridges - Requirements and Test Methods First Edition
Pen-injectors for medical use - Part 4: Requirements and test methods for electronic and electromechanical pen-injectors First
ISO
11608-4
Edition
ISO
11609
Dentistry - Toothpastes - Requirements, Test Methods and Marking First Edition
Clothing for Protection Against Heat and Flame - Test Methods and Performance Requirements for Heat-Protective Clothing First
ISO
11612
Edition
ISO
11613
Protective Clothing for Firefighters - Laboratory Test Methods and Performance Requirements First Edition
Reciprocating Internal Combustion Compression-Ignition Engines - Apparatus for Measurement of the Opacity and for Determintion
ISO
11614
of the Light Absorption Coefficient of Exhaust Gas First Edition; Replaces and Cancels ISO 3173:1974 and ISO/TR 4011:1976
ISO
11620
Information and Documentation - Library Performance Indicators First Edition; Amendment 1: 1/15/2003
ISO
11621
Gas Cylinders - Procedures for Change of Gas Service First Edition
ISO
11622
Gas cylinders - Conditions for filling gas cylinders First Edition
ISO
11623
Transportable Gas Cylinders - Periodic Inspection and Testing of Composite Gas Cylinders First Edition
ISO
11625
Gas Cylinders - Safe Handling Second edition
ISO
11629
Cranes Measurement of the mass of a crane and its components First Edition
ISO
11630
Cranes - Measurement of Wheel Alignment First Edition
ISO
11631
Measurement of Fluid Flow - Methods of Specifying Flowmeter Performance First Edition
ISO
11632
Stationary Source Emissions - Determination of Mass Concentration of Sulfur Dioxide - Ion Chromatography Method First Edition
ISO
11634 CORR 1
Snowboard-boots ù Interface with ski-bindings TECHNICAL CORRIGENDUM 1
ISO
11634
Snowboard-Boots - Interface with Ski-Binding First Edition
ISO
11640
Leather - Tests for Colour Fastness - Colour Fastness to Cycles of to-and-fro Rubbing First Edition; (IULTCS/IUF 450)
ISO
11641
Leather - Tests for Colour Fastness - Colour Fastness to Perspiration First Edition; (IULTCS/IUF 426)
ISO
11642
Leather - Tests for Colour Fastness - Colour Fastness to Water First Edition; (IULTCS/IUF 421)
ISO
11643
Leather - Tests for Colour Fastness - Colour Fastness of Small Samples to Dry-Cleaning Solutions First Edition; (IULTCS/IUF 434)
ISO
11644
Leather - Tests for Adhesion of Finish First Edition; (IULTCS/IUF 470)
ISO
11646
Leather - Measurement of Area First Edition; (IULTCS/IUF 32)
ISO
11648-1
Statistical Aspects of Sampling from Bulk Materials - Part 1: General Principles First Edition
ISO
11648-2
Statistical Aspects of Sampling from Bulk Materials - Part 2: Sampling of Particulate Materials First Edition
ISO
11650
Performance of Refrigerant Recovery and/or Recycling Equipment First Edition
Steel and Iron - Determination of Cobalt Content - Flame Atomic Absorption Spectrometric Method First Edition; BS 6200: Part 3:
ISO
11652
Section 3.11: Subsection 3.11.3: 1997
ISO
11653
Steel - Determination of High Cobalt Content - Potentiometric Titration Method After Separation by Ion Exchange First Edition
ISO
11654
Acoustics - Sound Absorbers for Use in Buildings - Rating of Sound Absorption First Edition
ISO
11655
Measurement of Liquid Flow in Open Channels - Method of Specifying Performance of Hydrometric Equipment First Edition
Textile Machinery and Accessories - Machine Parts in Contact with Textile Processing Oils - Part 1: Determination of Anticorrosive
ISO
11659-1
Effect upon Steel First Edition
Textile machinery and accessories Machine parts in contact with textile processing oils Part 2: Determination of the impact on
ISO
11659-2
polymeric materials First Edition
Textile machinery and accessories Machine parts in contact with textile processing oils Part 3: Determination of the impact on
ISO
11659-3
lacquers First Edition
ISO
11660-1
Cranes - Access, Guards and Restraints - Part 1: General First Edition
ISO
11660-2
Cranes - Access, Guards and Restraints - Part 2: Mobile Cranes First Edition
ISO
11660-3
Cranes - Access, Guards and Restraints - Part 3: Tower Cranes First Edition
ISO
11660-5
Cranes - Access, Guards and Restraints - Part 5: Bridge and Gantry Cranes First Edition
ISO
11661
Mobile Cranes - Presentation of Rated Capacity Charts First Edition
ISO
11662-1
Mobile Cranes - Experimental Determination of Crane Performance - Part 1: Tipping Loads and Radii First Edition
Fibre-Reinforced Plastics - Moulding Compounds and Prepregs - Determination of Resin, Reinforced-Fibre and Mineral-Filler Content
ISO
11667
- Dissolution Methods First Edition
ISO
11668
Binders for Paints and Varnishes - Chlorinated Polymerization Resins - General Methods of Test First Edition
Lasers and laser-related equipment ù Test methods for laser beam parameters ù Beam positional stability TECHNICAL
ISO
11670 CORR 1
CORRIGENDUM 1 Second Edition
ISO
11670
Lasers and laser-related equipment ù Test methods for laser beam parameters ù Beam positional stability Second Edition
ISO
11673
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes Determination of the fracture toughness properties First edition
ISO
11674
Ships and marine technology Heading control systems Second Edition
ISO
11675
Textile machinery and accessories Flatbed knitting machines Vocabulary Second Edition
ISO
11676
Textile Machinery and Accessories - Chain Links for Wrap Knitting Machines - Vocabulary and Symbols First Edition
Textile Machinery and Accessories - Main Dimensions of Flat Steel Healds with Open End Loops - Part 1: C-Shaped End Loops First
ISO
11677-1
Edition
Textile Machinery and Accessories - Main Dimensions of Flat Steel Healds with Open End Loops - Part 2: J-Shaped End Loops First
ISO
11677-2
Edition
Textile Machinery and Accessories - Main Dimensions of Open End Loop Flat Steel Healds and Their Corresponding Heald- Carrying
ISO
11677-3
Rods - Part 3: Carrying Rods for Healds with C- and J-Shaped End Loops First Edition
ISO
11678
Agricultural Irrigation Equipment - Aluminium Irrigation Tubes First Edition
Machinery for Forestry - Safety Requirements and Testing for Pole-Mounted Powered Pruners - Part 1: Units Fitted with an Integral
ISO
11680-1
Combustion Engine First Edition
Machinery for Forestry - Safety Requirements and Testing for Pole-Mounted Powered Pruners - Part 2: Units for Use with a Back-
ISO
11680-2
Pack Power Source First Edition
Machinery for forestry ù Portable chainsaw safety requirements and testing ù Part 1: Chain-saws for forest service AMENDMENT 1:
ISO
11681-1 AMD 1
Balance Second Edition
ISO
11681-1
Machinery for forestry Portable chain-saw safety requirements and testing Part 1: Chain-saws for forest service Second Edition
ISO
11681-2
Machinery for forestry Portable chain-saw safety requirements and testing Part 2: Chain-saws for tree service Second Edition
ISO
11682
Brush-Cutters and Grass-Trimmers - Technical Data First Edition; (Corrected and Reprinted - 1994)
ISO
11683
Packaging - Tactile Warnings of Danger - Requirements Second Edition; Corrected and Reprinted 09/01/1998
Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Safety Signs and Hazard Pictorials -
ISO
11684
General Principles First Edition
ISO
11687-1
Plain Bearings - Pedestal Plain Bearings - Part 1: Pillow Blocks First Edition
ISO
11687-2
Plain Bearings - Pedestal Plain Bearings - Part 2: Side Flange Bearings First Edition
ISO
11687-3
Plain Bearings - Pedestal Plain Bearings - Part 3: Centre Flange Bearings First Edition
Acoustics - Procedure for the Comparison of Noise-Emission Data for Machinery and Equipment First Edition [Superseded By: GOST
ISO
11689
31327]
Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery - Part 1: Noise Control Strategies
ISO
11690-1
First Edition
Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery - Part 2: Noise Control Measures
ISO
11690-2
First Edition
Acoustics - Measurement of Insertion Loss of Ducted Silencers without Flow - Laboratory Survey Method First Edition; (Corrected
ISO
11691
and Reprinted - 1995)
ISO
11692
Ferritic-Pearlitic Engineering Steels for Precipitation Hardening from Hot-Working Temperatures First Edition
ISO
11693
Identification Cards - Optical Memory Cards - General Characteristics Third Edition
ISO
11694-1
Identification Cards - Optical Memory Cards - Linear Recording Method - Part 1: Physical Characteristics Third Edition
Identification Cards - Optical Memory Cards - Linear Recording Method - Part 2: Dimensions and Location of the Accessible Optical
ISO
11694-2
Area Third Edition
Identification Cards - Optical Memory Cards - Linear Recording Method - Part 3: Optical Properties and Characteristics Second
ISO
11694-3
Edition
ISO
11694-4
Identification Cards - Optical Memory Cards - Linear Recording Method - Part 4: Logical Data Structures Second Edition
Identification cards Optical memory cards Part 5: Data format for information interchange for applications using ISO/IEC 11694-4,
ISO
11694-5
Annex B First Edition
Identification cards Optical memory cards Linear recording method Part 6: Use of biometrics on an optical memory card First
ISO
11694-6
Edition
ISO
11697
Bases for Design of Structures - Loads Due to Bulk Materials First Edition
Micrographics - Methods of Measuring Image Quality Produced by Aperture Card Scanners - Part 1: Characteristics of the Test
ISO
11698-1
Images First Edition
Micrographics - Methods of Measuring Image Quality Produced by Aperture Card Scanners - Part 2: Quality Criteria and Control First
ISO
11698-2
Edition
Non-Destructive Testing - Industrial Radiographic Films - Part 1: Classification of Film Systems for Industrial Radiography First
ISO
11699-1
Edition
Non-Destructive Testing - Industrial Radiographic Films - Part 2: Control of Film Processing by Means of Reference Values First
ISO
11699-2
Edition
Carbonaceous Materials Used in the Production of Aluminium - Cathode Blocks and Baked Anodes - Determination of Electrical
ISO
11713
Resistivity at Ambient Temperature
Textiles - Determination of Resistance of Cellulose-Containing Textiles to Micro-Organisms - Soil Burial Test - Part 1: Assessment of
ISO
11721-1
Rot-Retardant Finishing First Edition
Textiles Determination of the resistance of cellulose-containing textiles to micro-organisms Soil burial test Part 2: Identification of
ISO
11721-2
long-term resistance of a rot retardant finish First Edition
ISO
11722
Solid Mineral Fuels - Hard Coal - Determination of Moisture in the General Analysis Test Sample by Drying in Nitrogen First Edition
ISO
11723
Solid mineral fuels Determination of arsenic and selenium Eschka s mixture and hydride generation method First Edition
ISO
11724
Solid mineral fuels Determination of total fluorine in coal, coke and fly ash First Edition
ISO
11726
Solid mineral fuels Guidelines for the validation of alternative methods of analysis First Edition
ISO
11727
Pneumatic Fluid Power - Identification of Ports and Control Mechanisms of Control Valves and Other Components First Edition
ISO
11731
Water Quality - Detection and Enumeration of Legionella First Edition
Water quality Detection and enumeration of Legionella Part 2: Direct membrane filtration method for waters with low bacterial counts
ISO
11731-2
First Edition
Water quality Determination of ammonium nitrogen Method by flow analysis (CFA and FIA) and spectrometric detection Second
ISO
11732
Edition
Water quality Determination of the elimination and biodegradability of organic compounds in an aqueous medium Activated sludge
ISO
11733
simulation test Second Edition
Water Quality - Evaluation of theUltimate" Anaerobic Biodegradability of Organic Compounds in Digested Sludge - Method by
ISO
11734
Measurement of the Biogas Production First Edition"
Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products
ISO
11737-1 CORR 1
TECHNICAL CORRIGENDUM 1
Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products
ISO
11737-1
Second Edition;:2004
Sterilization of Medical Devices - Microbiological Methods - Part 2: Tests of Sterility Performed in the Validation of a Sterilization
ISO
11737-2
Process First Edition
ISO
11738
Agricultural Irrigation Equipment - Control Heads First Edition
Road Vehicles - Technical Documentation of Electrical and Electronic Systems - Part 1: Content of Exchanged Documents First
ISO
11748-1
Edition
ISO
11748-2
Road Vehicles - Technical Documentation of Electrical and Electronic Systems - Part 2: Documentation Agreement First Edition
ISO
11748-3
Road Vehicles - Technical Documentation of Electrical and Electronic Systems - Part 3: Application Example First Edition
ISO
11749
Belt Drive - V-Ribbed Belts for the Automotive Industry - Fatigue Test First Edition; Technical Corrigendum 1: 4/01/2003
Flexible Cellular Polymeric Materials - Moulded and Extruded Sponge or Expanded Cellular Rubber Products - Compressibility Test
ISO
11752
on Finished Parts First Edition; Amendment 1: 09/15/2006
ISO
11754
Space data and information transfer systems - Telemetry channel coding Second Edition
ISO
11755
Gas cylinders Cylinder bundles for compressed and liquefied gases (excluding acetylene) Inspection at time of filling Second edition
ISO
11756
Information Technology - Programming Languages - M Second Edition
Rubber and Plastics Hoses - Exposure to a Xenon Arc Lamp - Determination of Changes in Colour and Appearance First Edition;
ISO
11758
Technical Corrigendum 1: 8/1/1998
ISO
11759
Rubber Hoses and Hose Assemblies for Dispensing Liquefied Petroleum Gases (LPGs) - Specification First Edition
ISO
11760
Classification of coals First edition
ISO
11770-1
Information Technology - Security Techniques - Key Management - Part 1: Framework First Edition
Information Technology - Security Techniques - Key Management - Part 2: Mechanisms Using Symmetric Techniques First Edition;
ISO
11770-2
Technical Corrigendum 1: 07/15/2005
ISO
11770-3
Information Technology - Security Techniques - Key Management - Part 3: Mechanisms Using Asymmetric Techniques First Edition
ISO
11770-4
Information technology Security techniques Key management Part 4: Mechanisms based on weak secrets First Edition
ISO
11782-1
Corrosion of Metals and Alloys - Corrosion Fatigue Testing - Part 1: Cycles to Failure Testing First Edition
Corrosion of Metals and Alloys - Corrosion Fatigue Testing - Part 2: Crack Propagation Testing Using Precracked Specimens First
ISO
11782-2
Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 1: General standard for
ISO
11783-1
mobile data communication First Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 2: Physical layer
ISO
11783-2 AMD 1
AMENDMENT 1 First Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 2: Physical layer First
ISO
11783-2 CORR 1
Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 2: Physical layer First
ISO
11783-2
Edition
Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 3: Data Link Layer
ISO
11783-3
First Edition
Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 4: Network Layer First
ISO
11783-4
Edition
Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 5: Network
ISO
11783-5
Management First Edition: Corrigendum 1 6/15/2002
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 6: Virtual terminal
ISO
11783-6 CORR 1
TECHNICAL CORRIGENDUM 1 First Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 6: Virtual terminal First
ISO
11783-6
Edition
Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 7: Implement
ISO
11783-7 CORR 1
Messages Application Layer First Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 7: Implement messages
ISO
11783-7
application layer First Edition
Tractors and machinery for agriculture and forestry Serial control and communications data network Part 8: Power train messages
ISO
11783-8
First Edition
Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 9: Tractor ECU First
ISO
11783-9
Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 11: Mobile data element
ISO
11783-11
dictionary First Edition
Tractors and machinery for agriculture and forestry ù Serial control and communications data network ù Part 13: File server First
ISO
11783-13
Edition
ISO
11784
Radio-Frequency Identification of Animals - Code Structure Second Edition; Amendment 1:11/15/2004
ISO
11785
Radio-Frequency Identification of Animals - Technical Concept First Edition
ISO
11786
Agricultural Tractors and Machinery - Tractor- Mounted Sensor Interface - Specifications First Edition
Machinery for Agriculture and Forestry - Data Interchange Between Management Computer and Process Computers - Data
ISO
11787
Interchange Syntax First Edition
Electronic Data Interchange between Information Systems in Agriculture - Agricultural Data Element Dictionary - Part 1: General
ISO
11788-1
Description First Edition
Electronic Data Interchange between Information Systems in Agriculture - Agricultural Data Element Dictionary - Part 2: Dairy
ISO
11788-2
Farming First Edition
Electronic Data Interchange between Information Systems in Agriculture - Agricultural Data Element Dictionary - Part 3: Pig Farming
ISO
11788-3
First Edition
ISO
11789
Powered Edgers with Rigid Cutting Means - Definitions, Safety Requirements and Test Procedures First Edition
ISO
11795
Agricultural Tractor Drive Wheel Tyres - Method of Measuring Tyre Rolling Circumference First Edition
Information and Documentation - Permanence and Durability of Writing, Printing and Copying on Paper - Requirements and Test
ISO
11798
Methods First Edition
ISO
11799
Information and documentation Document storage requirements for archive and library materials First Edition
ISO
11800
Information and Documentation - Requirements for Binding Materials and Methods Used in the Manufacture of Books First Edition
ISO
11801 CORR 2
Information technology û Generic cabling for customer premises Second Edition
ISO
11801 CORR 1
Information technology û Generic cabling for customer premises Second Edition
ISO
11801
Information technology û Generic cabling for customer premises Second Edition
Agricultural and Forestry Machinery - Portable Hand-Held Combustion Engine Driven Brush Cutters and Grass Trimmers - Safety
ISO
11806
First Edition
Integrated Optics - Vocabulary - Part 1: Basic Terms and Symbols Optique Integree - Vocabulaire - Partie 1: Termes Fondamentaux
ISO
11807-1
Et Symboles First Edition
Integrated Optics - Vocabulary - Part 2: Terms Used in Classification Optique Integree - Vocabulaire - Partie 2: Termes Utilises Pour
ISO
11807-2
La Classification First Edition
Lasers and laser-related equipment Test method and classification for the laser resistance of surgical drapes and/or patient
ISO
11810-1
protective covers Part 1: Primary ignition and penetration First edition
Lasers and laser-related equipment ù Test method and classification for the laser-resistance of surgical drapes and/or patient-
ISO
11810-2
protective covers ù Part 2: Secondary ignition First edition
ISO
11812
Small Craft - Watertight Cockpits and Quick-Draining Cockpits First Edition
ISO
11813
Milk and Milk Products - Determination of Zinc Content - Flame Atomic Absorption Spectrometric First Edition
ISO
11814
Dried milk Assessment of heat treatment intensity Method using high-performance liquid chromatography First Edition: IDF 162
ISO
11815
Milk ù Determination of total milk-clotting activity of bovine rennets First Edition
Milk and milk products Determination of alkaline phosphatase activity Part 1: Fluorimetric method for milk and milk-based drinks
ISO
11816-1
Second Edition
ISO
11816-2
Milk and Milk Products - Determination of Alkaline Phosphatase Activity - Part 2: Fluorometric Method for Cheese First Edition
ISO
11817
Roasted Ground Coffee - Determination of Moisture Content - Karl Fischer Method (Reference Method) First Edition
ISO
11819-1
Acoustics - Measurement of the Influence of Road Surfaces on Traffic Noise - Part 1: Statistical Pass-By Method First Edition
ISO
11820
Acoustics - Measurements on Silencers IN SITU First Edition
ISO
11821
Acoustics - Measurements of the in Situ Sound Attenuation of a Removable Screen First Edition
Information and Documentation - Extension of the Arabic Alphabet Coded Character Set for Bibliographic Information Interchange
ISO
11822
First Edition
Textile Machinery and Accessories - Latch-Type Needles for Knitting Machines - Coordination of Shank Widths and Hook Heights
ISO
11825
First Edition
Plastics - Unplasticized Poly(Vinyl Chloride) Sheets - Types, Dimensions and Characteristics - Part 1: Sheets of Thickness Not Less
ISO
11833-1
Than 1 mm First Edition
Plastics - Unplasticized Poly(Vinyl Chloride) Sheets - Types, Dimensions and Characteristics - Part 2: Sheets of Thickness Less Than
ISO
11833-2
1 mm First Edition
ISO
11838
Motorcycle and Motorcycle-Rider Kinematics - Vocabulary First Edition
Road Vehicles and Internal Combustion Engines - Filter Vocabulary Part 1: Definitiions of Filters and Filter Components Vehicules
Routiers Et Moteurs A Combustion Interne - Vocabulaire Relatif Aux Filtres - Partie 1: Definitions Des Filtres Et De Leurs
ISO
11841-1
Composants First Edition
Road Vehicles and Internal Combustion Engines - Filter Vocabulary Part 2: Definitiions of Characteristica of Filters and their
Components Vehicules Routiers Et Moteurs A Combustion Interne - Vocabulaire Relatif Aux Filtres - Partie 2: Definitions Des
ISO
11841-2
Caracteristiques Des Filtres Et De Leurs Composants First Edition
Capability of Detection - Part 1: Terms and Definitions Capacite de detection - Partie 1: Termes et definitions First Edition; Technical
ISO
11843-1
Corrigendum 1: 11/15/2003
ISO
11843-2
Capability of Detection - Part 2: Methodology in the Linear Calibration Case First Edition
Capability of detection Part 3: Methodology for determination of the critical value for the response variable when no calibration data
ISO
11843-3
are used First Edition
ISO
11843-4
Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value First Edition
Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of
ISO
11844-1
indoor corrosivity First Edition
Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in
ISO
11844-2
indoor atmospheres First Edition
Corrosion of metals and alloys Classification of low corrosivity of indoor atmospheres Part 3: Measurement of environmental
ISO
11844-3
parameters affecting indoor corrosivity First Edition
ISO
11845
Corrosion of Metals and Alloys - General Principles for Corrosion Testing First Edition
Corrosion of Metals and Alloys - Determination of Resistance to Intergranular Corrosion of Solution Heat- Treatable Aluminium Alloys
ISO
11846
First Edition
ISO
11850
Machinery for Forestry - Self-Propelled Machinery - Safety Requirements Second Edition
ISO
11857
Textile Floor Coverings - Determination of Resistance to Delamination First Edition
ISO
11858
Textile Floor Coverings - Determination of Friability of Attached Foams First Edition
ISO
11859
Textile Floor Coverings - Pure Wool, Hand-Knotted Pile Carpets - Specification First Edition
ISO
11860
Textile Floor Coverings - Jute Carpet Backing Fabric - Specification First Edition
ISO
11861
Textile Floor Coverings - Coir Mats - Types and Specification First Edition
ISO
11862
Earth-Moving Machinery - Auxiliary Starting Aid Electrical Connector First Edition
ISO
11865
Instant Whole Milk Powder - Determination of White Flecks Number First Edition
Milk and milk products Enumeration of presumptive Escherichia coli Part 1: Most probable number technique using 4-
ISO
11866-1
methylumbelliferyl- Ô-D-glucuronide (MUG) Second Edition; IDF 170-1;:1997 [Replaced: ISO 11866-2, ISO 11866-2]
Milk and milk products - Enumeration of presumptive Escherichia coli - Part 2: Colony-count technique at 44 C using membranes
ISO
11866-2
Second Edition; IDF 170-2; Replaces ISO 11866-3:1997
ISO
11868
Heat-treated milk ù Determination of lactulose content ù Method using highperformance liquid chromatography Second Edition
ISO
11869
Yogurt - Determination of Titratable Acidity - Potentiometric Method First Edition
ISO
11870
Milk and Milk Products - Determination of Fat Content - General Guidance on the Use of Butyrometric Methods First Edition
ISO
11873
Hardmetals Determination of sulfur and carbon contents in cobalt metal powders Infrared detection method First edition
ISO
11881
Corrosion of Metals and Alloys - Exfoliation Corrosion Testing of Aluminium Alloys First Edition; Technical Corrigendum 1: 7-15-1999
Optics and Optical Instruments - Microscopes - Interfacing Connection for 35 mm SLR Photo Cameras (T-Thread Adaptation) First
ISO
11882
Edition
ISO
11883
Optics and Optical Instruments - Microscopes - Marking of Stereomicroscopes First Edition
ISO
11884-1
Optics and photonics - Minimum requirements for stereomicroscopes - Part 1: Stereomicroscopes for general use Second Edition
ISO
11884-2
Optics and photonics ù Minimum requirements for stereomicroscopes ù Part 2: High performance microscopes Second Edition
Water quality ù Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) Second
ISO
11885
Edition
Building construction machinery and equipment ù Pile driving and extracting equipment ù Terminology and commercial Specifications
ISO
11886 CORR 1
First Edition
Building construction machinery and equipment ù Pile driving and extracting equipment ù Terminology and commercial Specifications
ISO
11886
First Edition
ISO
11890-1
Paints and Varnishes - Determination of Volatile Organic Compound (VOC) Content - Part 1: Difference Method Second Edition
Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method Second
ISO
11890-2
Edition
ISO
11897
Packaging - Sacks Made from Thermoplastic Flexible Film - Tear Propagation on Edge Folds First Edition
Road vehicles ù Controller area network (CAN) ù Part 1: Data link layer and physical signalling TECHNICAL CORRIGENDUM 1 First
ISO
11898-1 CORR 1
Edition
ISO
11898-1
Road vehicles ù Controller area network (CAN) ù Part 1: Data link layer and physical signalling First Edition [Replaced: ISO 11898]
Road vehicles Controller area network (CAN) Part 2: High-speed medium access unit First Edition; Together with 11898-1:2003
ISO
11898-2
Replaces 11898:1993
Road vehicles ù Controller area network (CAN) ù Part 3: Low-speed, fault-tolerant, medium-dependent interface TECHNICAL
ISO
11898-3 CORR 1
CORRIGENDUM 1 First Edition [Replaced: ISO 11519-2]
Road vehicles ù Controller area network (CAN) ù Part 3: Low-speed, fault-tolerant, medium-dependent interface First Edition
ISO
11898-3
[Superseded: ISO 11519-2]
ISO
11898-4
Road vehicles Controller area network (CAN) Part 4: Time-triggered communication
ISO
11898-5
Road vehicles ù Controller area network (CAN) ù Part 5: High-speed medium access unit with low-power mode First Edition
ISO
11900-1
Tools for pressing ù Ball-lock punch retainers ù Part 1: Types A and B, rectangular and square for light duty Second edition
ISO
11900-2
Tools for Pressing - Ball-Lock Punch Retainers - Part 2: Types C and D, Reduced for Light Duty First Edition
ISO
11900-3
Tools for pressing Ball-lock punch retainers Part 3: Type E, reduced for heavy duty First Edition
ISO
11901-1
Tools for pressing Gas springs Part 1: General specifications Second Edition
ISO
11901-2
Tools for pressing Gas springs Part 2: Specification of accessories Second Edition
ISO
11903
Tools for Pressing - Guide Pillar Mountings First Edition
Acoustics - Determination of Sound Immission from Sound Sources Placed Close to the Ear - Part 1: Technique Using a Microphone
ISO
11904-1
in a Real Ear (MIRE Technique) First Edition
Acoustics Determination of sound immission from sound sources placed close to the ear Part 2: Technique using a manikin First
ISO
11904-2
Edition
ISO
11905-1
Water Quality - Determination of Nitrogen - Part 1: Method Using Oxidative Digestion with Peroxosulfate First Edition
ISO
11907-1
Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 1: Guidance First Edition
ISO
11907-2
Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 2: Static Method First Edition
Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 3: Dynamic Decomposition Method Using a
ISO
11907-3
Travelling Furnace First Edition
Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 4: Dynamic Decomposition Method Using a
ISO
11907-4
Conical Radiant Heater First Edition
ISO
11908
Binders for Paints and Varnishes - Amino Resins - General Methods of Test First Edition
ISO
11909
Binders for paints and varnishes ù Polyisocyanate resins ù General methods of test Second Edition
Thermoplastics Pipes for the Conveyance of Fluids - Dimensions and Tolerances - Part 1: Metric Series First Edition; Together with
ISO
11922-1
ISO 11922-2, it Cancels and Replaces ISO 3606: 1976, ISO 3607: 1977, ISO 3608: 1976 and ISO 3609:1977
Thermoplastics Pipes for the Conveyance of Fluids - Dimensions and Tolerances - Part 2: Inch-Based Series First Edition; Together
ISO
11922-2
with ISO 11922-1, it Cancels and Replaces ISO 3606: 1976, ISO 3607: 1977, ISO 3608: 1976 and ISO 3609: 1977
ISO
11923
Water Quality - Determination of Suspended Solids by Filtration Through Glass-Fibre Filters First Edition
Reaction to Fire Tests - Ignitability of Building Products Subjected to Direct Impingement of Flame - Part 2: Single-Flame Source Test
ISO
11925-2
Second Edition
Reaction to Fire Tests - Ignitability of Building Products Subjected to Direct Impingement of Flame - Part 3: Multi-Source Test First
ISO
11925-3
Edition; Technical Corrigendum 1-1998
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing - Part 1: Ports with O-
ISO
11926-1
Ring Seal in Truncated Housing First Edition
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing - Part 2: Heavy-Duty
ISO
11926-2
(S Series) Stud Ends First Edition (SAE J 1926/2)
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing - Part 3: Light-Duty
ISO
11926-3
(L Series) Stud Ends First Edition
ISO
11928-1
Micrographics - Quality Control of Graphic COM Recorders - Part 1: Characteristics of the Test Frames First Edition
ISO
11928-2
Micrographics - Quality Control of Graphic COM Recorders - Part 2: Quality Criteria and Control First Edition
Determination of the Detection Limit and Decision Threshold for Ionizing Radiation Measurements - Part 1: Fundamentals and
ISO
11929-1
Application to Counting Measurements without the Influence of Sample Treatment First Edition
Determination of the Detection Limit and Decision Threshold for Ionizing Radiation Measurements - Part 2: Fundamentals and
ISO
11929-2
Application to Counting Measurements with the Influence of Sample Treatment First Edition
Determination of the Detection Limit and Decision Threshold for Ionizing Radiation Measurements - Part 3: Fundamentals and
Application to Counting Measurements by High Resolution Gamma Spectrometry, without the Influence of Sample Treatment First
ISO
11929-3
Edition
Determination of the Detection Limit and Decision Threshold for Ionizing Radiation Measurements - Part 4: Fundamentals and
ISO
11929-4
Application to Measurements by Use of Linear-Scale Analogue Ratemeters, without the Influence of Sample Treatment First Edition
Determination of the detection limit and decision threshold for ionizing radiation measurements Part 5: Fundamentals and
ISO
11929-5
applications to counting measurements on filters during accumulation of radioactive material First edition
Determination of the detection limit and decision threshold for ionizing radiation measurements Part 6: Fundamentals and
ISO
11929-6
applications to measurements by use of transient mode First edition
Determination of the detection limit and decision threshold for ionizing radiation measurements Part 7: Fundamentals and general
ISO
11929-7
applications First Edition
Determination of the detection limit and decision threshold for ionizing radiation measurements Part 8: Fundamentals and application
ISO
11929-8
to unfolding of spectrometric measurements without the influence of sample treatment First Edition
ISO
11932
Activity Measurements of Solid Materials Considered for Recycling, Re-Use, or Disposal as Non-Radioactive Waste First Edition
Components for Containment Enclosures - Part 1: Glove/Bag Ports, Bungs for Glove/Bag Ports, Enclosure Rings and
ISO
11933-1
Interchangeable Units First Edition
Components for Containment Enclosures - Part 2: Glove, Welded Bags, Gaiters for Remote-Handling Tongs and for Manipulators
ISO
11933-2
First Edition
Components for Containment Enclosures - Part 3: Transfer Systems Such as Plain Doors, Airlock Chambers, Double Door Transfer
ISO
11933-3
Systems, Leaktight Connections for Waste Drums First Edition
Components for Containment Enclosures - Part 4: Ventilation and Gas-Cleaning Systems Such as Filters, Traps, Safety and
ISO
11933-4
Regulation Valves, Control and Protection Devices First Edition
ISO
11933-5
Components for Containment Enclosures - Part 5: Penetrations for Electrical and Fluid Circuits First Edition
ISO
11940
Information and Documentation - Transliteration of Thai First Edition
Information and documentation ù Transliteration of Thai characters into Latin characters Part 2: Simplified transcription of Thai
ISO
11940-2
language First edition
ISO
11943
Hydraulic Fluid Power - On-Line Automatic Particle-Counting Systems for Liquids - Methods of Calibration and Validation First Edition
ISO
11948-1
Urine-Absorbing Aids - Part 1: Whole-Product Testing First Edition
ISO
11949
Cold-Reduced Electrolytic Tinplate First Edition; Replaces ISO 1111-1, 1111-2, 4977-1, 4977-2
ISO
11950
Cold-Reduced Electrolytic Chromium/Chromium Oxide-Coated Steel First Edition;
Cold-Reduced Blackplate in Coil Form for the Production of Tinplate or Electrolytic Chromium /Chromium Oxide-Coated Steel First
ISO
11951
Edition
ISO
11957
Acoustics - Determination of Sound Insulation Performance of Cabins - Laboratory and in Situ Measurements First Edition
ISO
11960 CORR 1
Petroleum and natural gas industries ù Steel pipes for use as casing or tubing for wells TECHNICAL CORRIGENDUM 1 Third Edition
ISO
11960
Petroleum and natural gas industries ù Steel pipes for use as casing or tubing for wells Third Edition
ISO
11961
Petroleum and Natural Gas Industries - Steel Pipes for Use as Drill Pipe - Specification First Edition
ISO
11962 CORR 1
Micrographics ù Image mark (blip) used with 16 mm and 35 mm roll microfilm First Edition
ISO
11963
Plastics - Polycarbonate Sheets - Types, Dimensions and Characteristics First Edition (CEN EN ISO 11963: 1995)
Water Quality - Determination of Arsenic - Atomic Absorption Spectrometric Method (Hydride Technique) First Edition (CEN EN ISO
ISO
11969
11969- 1996)
ISO
11970
Specification and Approval of Welding Procedures for Production Welding of Steel Castings First Edition
ISO
11971
Visual Examination of Surface Quality of Steel Castings First Edition
ISO
11972
Corrosion-Resistant Cast Steels for General Applications First Edition
ISO
11973
Heat-Resistance Cast Steels and Alloys for General Applications First Edition
ISO
11978
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Information Supplied by the Manufacturer First Edition
Ophthalmic implants Intraocular lenses Part 1: Vocabulary Implants ophtalmiques Lentilles intraoculaires Partie 1: Vocabulaire
ISO
11979-1
Second Edition
ISO
11979-2
Ophthalmic Implants - Intraocular Lenses - Part 2:Optical Properties and Test Methods First Edition; Corrigendum 1: 11/1/2003
ISO
11979-3
Ophthalmic Implants - Intraocular Lenses - Part 3: Mechanical Properties and Test Methods Second Edition
ISO
11979-4
Ophthalmic Implants - Intraocular Lenses - Part 4: Labelling and Information First Edition
ISO
11979-5
Ophthalmic Implants - Intraocular Lenses - Part 5: Biocompatibility Second Edition
ISO
11979-6
Ophthalmic implants ù Intraocular lenses ù Part 6: Shelf-life and transport stability Second Edition
ISO
11979-7
Ophthalmic Implants - Intraocular Lenses - Part 7: Clinical Investigations Second Edition
ISO
11979-8
Ophthalmic implants Intraocular lenses Part 8: Fundamental requirements Second Edition
ISO
11979-9
Ophthalmic implants Intraocular lenses Part 9: Multifocal intraocular lenses First Edition
ISO
11979-10
Ophthalmic implants Intraocular lenses Part 10: Phakic intraocular lenses First Edition
ISO
11980
Opthalmic Optics - Contact Lenses and Contact Lens Care Products - Guidance for Clinical Investigations First Edition
Ophthalmic optics - Contact lenses and contact lens care products - Determination of physical compatibility of contact lens care
ISO
11981
products with contact lenses First Edition
ISO
11985
Opthalmic Optics - Contact Lenses - Ageing by Exposure to UV and Visible Radiation First Edition
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Guidelines for Determination of Preservative Uptake and
ISO
11986
Release First Edition
ISO
11987
Opthalmic Optics - Contact Lenses - Determination of Self-Life First Edition
Optics and Optical Instruments - Lasers and Laser-Related Equipment - Determination of Laser Resistance of Tracheal Tube Shafts
ISO
11990
Second Edition
Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 1: Physical layer
ISO
11992-1
and data-link layer Second Edition
Road vehicles ù Interchange of digital information on electrical connections between towing and towed vehicles ù Part 2: Application
ISO
11992-2 AMD 1
layer for brakes and running gear AMENDMENT 1 Second Edition
Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 2: Application
ISO
11992-2
layer for brakes and running gear Second Edition
Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 3: Application
ISO
11992-3
layer for equipment other than brakes and running gear Second Edition
Road vehicles ù Interchange of digital information on electrical connections between towing and towed vehicles ù Part 4: Diagnostics
ISO
11992-4 CORR 1
TECHNICAL CORRIGENDUM 1 First Edition
Road vehicles ù Interchange of digital information on electrical connections between towing and towed vehicles ù Part 4: Diagnostics
ISO
11992-4
First Edition
ISO
11994
Cranes - Availability - Vocabulary Appareils De Levage A Charge Suspendue - Disponibilite - Vocabulaire First Edition
ISO
11995
Aircraft - Stability Requirements for Loading and Servicing Equipment First Edition
ISO
11997-1
Paints and varnishes Determination of resistance to cyclic corrosion conditions Part 1: Wet (salt fog)/dry/humidity Second Edition
Paints and Varnishes - Determination of Resistance to Cyclic Corrosion Conditions - Part 2: Wet (Salt Fog)/Dry/Humidity/UV Light
ISO
11997-2
First Edition
ISO
11998
Paints and varnishes Determination of wet-scrub resistance and cleanability of coatings Second Edition
Plastics/Rubber - Polymer Dispersions and Rubber Latices (Natural and Synthetic) - Definitions and Review of Test Methods Second
ISO
12000
Edition
ISO
12001
Acoustics - Noise Emitted by Machinery and Equipment - Rules for the Drafting and Presentation of a Noise Test Code First Edition
Agricultural and Forestry Tractors - Narrow-Track Wheeled Tractors - Part 1: Front-Mounted Roll-Over Protective Structures First
ISO
12003-1
Edition
Agricultural and Forestry Tractors - Narrow-Track Wheeled Tractors - Part 2: Rear-Mounted Roll-Over Protective Structures First
ISO
12003-2
Edition
ISO
12004
Metallic Materials - Guidelines for the Determination of Forming-Limit Diagrams First Edition
ISO
12005
Laser and Laser-Related Equipment - Test Methods for Laser Beam Parameters - Polarization Second Edition
Building Construction - Organization of Information About Construction Works - Part 2: Framework for Classification of Information
ISO
12006-2
First Edition
Building construction ù Organization of information about construction works ù Part 3: Framework for object-oriented information First
ISO
12006-3
Edition [Superseded: BSI BS ISO 12006-3, BSI BS ISO/PAS 12006-3, ISO PAS 12006-3]
ISO
12017
Plastics - Poly(Methyl Methacrylate) Double- and Triple-Skin Sheets - Test Methods First Edition CEN EN ISO 12 017: 1996
ISO
12020
Water Quality - Determination of Aluminium - Atomic Absorption Spectrometric Methods First Edition
ISO
12021-1
Road Vehicles - Sensitivity to Lateral Wind - Part 1: Open- Loop Test Method Using Wind Generator Input First Edition
Stationary Source Emissions - Determination of Carbon Monoxide, Carbon Dioxide and Oxygen - Performance Characteristics and
ISO
12039
Calibration of Automated Measuring Systems First Edition
ISO
12040
Graphic Technology - Prints and Printing Inks - Assessment of Light Fastness Using Filtered Xenon Arc Light First Edition
ISO
12042
Information Technology - Data Compression for Information Interchange - Binary Arithmetic Coding Algorithm First Edition
ISO
12043
Rolling Bearings - Single-Row Cylindrical Roller Bearings - Chamfer Dimensions for Loose Rib and Non-Rib Sides Second Edition
ISO
12044
Rolling Bearings - Single-Row Angular Contact Ball Bearings - Chamfer Dimensions for Outer Ring Non-Thrust Side First Edition
ISO
12046
Synchronous Belt Drives - Automotive Belts - Determination of Physical Properties First Edition
ISO
12048
Packaging - Complete, Filled Transport Packages - Compression and Stacking Tests Using a Compression Tester First Edition
ISO
12052
Health informatics Digital imaging and communication in medicine (DICOM) including workflow and data management First Edition
ISO
12056
Aircraft - Self-Propelled Passenger Stairs for Large Capacity Aircraft - Functional Requirements First Edition
Plastics - Determination of Viscosity Using a Falling-Ball Viscometer - Part 1: Inclined-Tube Method First Edition; Cancels and
ISO
12058-1
Replaces Annex B of ISO 9371
ISO
12076
Steel Wire Ropes - Determination of the Actual Modulus of Elasticity First Edition
ISO
12078
Anhydrous milk fat Determination of sterol composition by gas liquid chromatography (Reference method) First Edition
ISO
12080-1
Dried Skimmed Milk - Determination of Vitamin A Content - Part 1: Colorimetric Method First Edition
Dried Skimmed Milk - Determination of Vitamin A Content - Part 2: Method Using High-Performance Liquid Chromatography First
ISO
12080-2
Edition
ISO
12081
Milk - Determination of Calcium Content - Titrimetric Method First Edition
Processed cheese and processed cheese products Calculation of the content of added citrate emulsifying agents and acidifiers/pH-
ISO
12082
controlling agents, expressed as citric acid Second Edition;
ISO
12083
Information and Documentation - Electronic Manuscript Preparation and Markup First Edition
Geometrical Product Specification (GPS) - Surface Texture: Profile Method - Motif Parameters First Edition; Technical Corrigendum 1-
ISO
12085
1998
Plastics ù Fluoropolymer dispersions and moulding and extrusion materials ù Part 1: Designation system and basis for specifications
ISO
12086-1 CORR 1
TECHNICAL CORRIGENDUM 1 Second Edition
Plastics ù Fluoropolymer dispersions and moulding and extrusion materials ù Part 1: Designation system and basis for specifications
ISO
12086-1
Second Edition
Plastics ù Fluoropolymer dispersions and moulding and extrusion materials ù Part 2: Preparation of test specimens and determination
ISO
12086-2 CORR 1
of properties TECHNICAL CORRIGENDUM 1 Second Edition
Plastics ù Fluoropolymer dispersions and moulding and extrusion materials ù Part 2: Preparation of test specimens and determination
ISO
12086-2
of properties Second Edition
Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional
ISO
12087-1
Specification - Part 1: Common Architecture for Imaging First Edition
Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional
ISO
12087-2
Specification - Part 2: Programmer s Imaging Kernel System Application Program Interface First Edition; Corrigendum 1 09-15-1997
Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional
ISO
12087-3
Specification - Part 3: Image Interchange Facility (IIF) First Edition; Amendment 1-1996
Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange (IPI) - Functional
Specification - Part 5: Basic Image Interchange Format (BIIF) First Edition; Technical Corrigendum 1: 5/15/2001; Technical
ISO
12087-5
Corrigendum 2: 4/1/2002
Information Technology - Computer Graphics and Image Processing - Image Processing and Interchange - Application Program
ISO
12088-4
Interface Language Bindings - Part 4: C First Edition
ISO
12089
Information Technology - Computer Graphics and Image Processing - Encoding for the Image Interchange Facility (IIF) First Edition
ISO
12091
Structured-Wall Thermoplastics Pipes - Oven Test First Edition
Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing for the Detection of Laminar Imperfections in Strips/Plates Used in
ISO
12094
the Manufacture of Welded Tubes First Edition
ISO
12095
Seamless and Welded Steel Tubes for Pressure Purposes - Liquid Penetrant Testing First Edition
Submerged Arc-Welded Steel Tubes for Pressure Purposes - Radiographic Testing of the Weld Seam for the Detection of
ISO
12096
Imperfections First Edition
Road Vehicles - Airbag Components - Part 1: Vocabulary Vehicules Routiers - Composants Des Sacs Gonflables - Partie 1:
ISO
12097-1
Vocabulaire First Edition
ISO
12097-2
Road Vehicles - Airbag Components - Part 2: Testing of Airbag Modules First Edition
ISO
12097-3
Road Vehicles - Airbag Components - Part 3: Testing of Inflator Assemblies First Edition
Road vehicles Connectors for the electrical connection of towing and towed vehicles 15-pole connector for vehicles with 24 V
ISO
12098
nominal supply voltage Second Edition
Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology First Edition; Replaces TR
ISO
12100-1
12100-1
ISO
12100-2
Safety of machinery Basic concepts, general principles for design Part 2: Technical principles First Edition; Replaces TR 12100-2
ISO
12103-1
Road Vehicles - Test Dust for Filter Evaluation - Part 1: Arizona Test Dust First Edition
ISO
12103-2
Road Vehicles - Test Dust for Filter Evaluation - Part 2: Aluminium Oxide Test Dust First Edition
ISO
12106
Metallic Materials - Fatigue Testing - Axial-Strain-Controlled Method First Edition
ISO
12107
Metallic Materials - Fatigue Testing - Statistical Planning and Analysis of Data First Edition
ISO
12108
Metallic Materials - Fatigue Testing - Fatigue Crack Growth Method First Edition
ISO
12114
Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Cure Characteristics First Edition
Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Flowability, Maturation and Shelf
ISO
12115
Life First Edition; Technical Corrigendum: 11-15-1998
Earth-Moving Machinery - Tip-Over Protection Structure (TOPS) for Compact Excavators - Laboratory Tests and Performance
ISO
12117
Requirements First Edition; Technical Corrigendum 1-12-01-2000
Air Cargo Equipment - Identification of Double-Stud Tie-Down Fittings Having an Omnidirectional Rated Load Capacity of 22 250 N (5
ISO
12118
000 lbf) or Above First Edition
ISO
12119
Information Technology - Software Packages - Quality Requirements and Testing First Edition; AS/NZS 4366: 1996
Raw Optical Glass in Bulk and Preshaped Forms - Bubbles and Other Inclusions - Test Method and Classification First Edition;
ISO
12123
Amendment 1: 09/15/2005
ISO
12124
Acoustics - Procedures for the Measurement of Real-Ear Acoustical Characteristics of Hearing Aids First Edition
Prevailing Torque Type Hexagon Nuts with Flange (with Non-Metallic Insert) with Metric Fine Pitch Thread - Product Grades A and B
ISO
12125
First Edition
ISO
12126
Prevailing Torque Type All-Metal Hexagon Nuts with Flange with Metric Fine Pitch Thread - Product Grades A and B First Edition
Clothing for Protection Against Heat and Flame - Determination of Contact Heat Transmission Through Protective Clothing or
ISO
12127
Constituent Materials First Edition
Plain Bearings - Lubrication Holes, Grooves and Pockets - Dimensions, Types, Designation and Their Application to Bearing Bushes
ISO
12128
Second Edition
ISO
12129-1
Plain Bearings - Part 1: Fits First Edition
ISO
12129-2
Plain Bearings - Part 2: Tolerances on Form and Position and Surface Roughness for Shafts, Flanges and Thrust Collars First Edition
Plain Bearings - Hydrodynamic Plain Tilting Pad Thrust Bearings Under Steady-State Conditions - Part 1: Calculation of Tilting Pad
ISO
12130-1
Thrust Bearings First Edition
Plain Bearings - Hydrodynamic Plain Tilting Pad Thrust Bearings Under Steady-State Conditions - Part 2: Functions for Calculation of
ISO
12130-2
Tilting Pad Thrust Bearings First Edition
Plain Bearings - Hydrodynamic Plain Tilting Pad Thrust Bearings Under Steady-State Conditions - Part 3:Guide Values for the
ISO
12130-3
Calculation of Tilting Pad Thrust Bearings First Edition
Plain Bearings - Hydrodynamic Plain Thrust Pad Bearings Under Steady-State Conditions Part 1: Calculation of Thrust Pad Bearings
ISO
12131-1
First Edition
Plain Bearings - Hydronamic Plain Thrust Pad Bearings under Steady-State Conditions Part 2: Functions for the Calculation of Thrust
ISO
12131-2
Pad Bearings First Edition
Plain Bearings - Hydrodynamic Plain Thrust Pad Bearings under Steady-State Conditions Part 3: Guide Values for the Calculation of
ISO
12131-3
Thrust Pad Bearings First Edition
ISO
12132
Plain Bearings - Quality Assurance of Thin-Walled Half Bearings - Design FMEA First Edition
ISO
12135
Metallic materials Unified method of test for the determination of quasistatic fracture toughness First Edition
Paints and Varnishes - Determination of Mar Resistance - Part 1: Method Using a Curved Stylus First Edition; Technical Corrigendum
ISO
12137-1
1: 12-15-1998
ISO
12137-2
Paints and Varnishes - Determination of Mar Resistance - Part 2: Method Using a Pointed Stylus First Edition
ISO
12138
Textiles - Domestic Laundering Procedures for Textile Fabrics Prior to Flammability Testing First Edition
ISO
12140
Agricultural Machinery - Agricultural Trailers and Trailed Equipment - Drawbar Jacks First Edition
Stationary source emissions Determination of mass concentration of particulate matter (dust) at low concentrations Manual
ISO
12141
gravimetric method First edition
ISO
12142
Electronic Imaging - Media Error Monitoring and Reporting Techniques for Verification of Stored Data on Optical Digital Data Disks
ISO
12145
Resistance Welding Equipment - Angles for Mounting Spot Welding Electrodes First Edition
ISO
12149
Bolted Bonnet Steel Globe Valves for General-Purpose Applications First Edition
Connections for Hydraulic Fluid Power and General Use - Hose Fittings - Part 1: Hose Fittings with ISO 8434-3 O-Ring Face Seal
ISO
12151-1
Ends First Edition
Connections for hydraulic fluid power and general use Hose fittings Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24
cone
ISO
12151-2
connector ends with O-rings First Edition
Connections for Hydraulic Fluid Power and General Use - Hose Fittings - Part 3: Hose Fittings with ISO 6162 Flange Ends First
ISO
12151-3
Edition
Connections for hydraulic fluid power and general use ù Hose fittings ù Part 4: Hose fittings with ISO 6149 metric stud ends First
ISO
12151-4
Edition
Connections for hydraulic fluid power and general use ù Hose fittings ù Part 5: Hose fittings with ISO 8434-2 37
flared ends First
ISO
12151-5
Edition
ISO
12156-1
Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method Second Edition
ISO
12156-2
Diesel fuel ù Assessment of lubricity using the high-frequency reciprocating rig (HFRR) ù Part 2: Limit Second Edition
ISO
12161
Road vehicles Endurance braking systems of motor vehicles and towed vehicles Test procedures First Edition
Thermoplastics Materials for Pipes and Fittings for Pressure Applications - Classification and Designation - Overall Service (Design)
ISO
12162
Coefficient First Edition (CEN EN ISO 12162: 1995)
ISO
12164-1
Hollow Taper Interface with Flange Contact Surface - Part 1: Shanks - Dimensions First Edition
ISO
12164-2
Hollow Taper Interface with Flange Contact Surface - Part 2: Receivers - Dimensions First Edition
Tools for Moulding - Components of Compression and Injection Moulds and Diecasting Dies - Terms and Symbols Outillage De
Moulage - Composants Des Moulages Par Compression, Moules D'Injection Et Moules Pour Fonderie Sous Pression - Termes Et
ISO
12165
Symboles First Edition
Resistance Welding Equipment - Particular Specifications Applicable to Transformers with One Secondary Winding for Multi-Spot
ISO
12166
Welding, as Used in the Automobile Industry First Edition
Plain Bearings - Hydrostatic Plain Journal Bearings with Drainage Grooves under Steady-State Conditions - Part 1: Calculation of Oil-
ISO
12167-1
Lubricated Plain Journal Bearings with Drainage Grooves First Edition
Plain Bearings - Hydrostatic Plain Journal Bearings with Drainage Grooves under Steady-State Conditions - Part 2: Characteristic
ISO
12167-2
Values for the Calculation of Oil-Lubricated Plain Journal Bearings with Drainage Grooves First Edition
Plain Bearings - Hydrostatic Plain Journal Bearings without Drainage Grooves Under Steady-State Conditions - Part 1: Calculation of
ISO
12168-1
Oil-Lubricated Plain Journal Bearings without Drainage Grooves First Edition
Plain Bearings - Hydrostatic Plain Journal Bearings without Drainage Grooves Under Steady-State Conditions - Part 2: Characteristic
ISO
12168-2
Values for the Calculation of Oil-Lubricated Plain Journal Bearings without Drainage Grooves First Edition
ISO
12169
Nickel Oxide - Determination of Nickel Content - Electrolytic Deposition Method First Edition
ISO
12170
Gas Welding Equipment - Thermoplastic Hoses for Welding and Allied Processes First Edition
ISO
12171
Space Data and Information Transfer Systems - Telecommand - Channel Service Second Edition
ISO
12172
Space data and information transfer systems - Telecommand - Data routing service Second Edition
ISO
12173
Space data and information transfer systems - telecommand-command operation procedures Second Edition
Space data and information transfer systems Telecommand Architectural specification for the data management service Second
ISO
12174
Edition
ISO
12175
Space Data and Information Transfer Systems - Standard Formatted Data Units - Structure and Construction Rules First Edition
ISO
12176-1
Plastics pipes and fittings Equipment for fusion jointing polyethylene systems Part 1: Butt fusion Second Edition
ISO
12176-2
Plastics Pipes and Fittings - Equipment for Fusion Jointing Polyethylene Systems - Part 2: Electrofusion First Edition
ISO
12176-3
Plastics Pipes and Fittings - Equipment for Fusion Jointing Polyethylene Systems - Part 3: Operator's Badge Second Edition
ISO
12176-4
Plastics Pipes and Fittings - Equipment for fusion Jointing Polyethylene Systems - Part 4: Traceability Coding First Edition
Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Calibration of Contact (Stylus) Instruments First
ISO
12179
Edition; TECHNICAL CORRIGENDUM 1: 12-01-2003
ISO
12183
Nuclear fuel technology Controlledpotential coulometric assay of plutonium Second Edition
ISO
12184
Determination of Solubility in Nitric Acid of Plutonium in Unirradiated Mixed Oxide Fuel Pellets (U,Pu)O2 First Edition
Crude Petroleum and Petroleum Products - Determination of Density - Oscillating U-Tube Method First Edition; Technical
ISO
12185
Corrigendum 1:8-15-2001
ISO
12192
Paper and Board - Compressive Strength - Ring Crush Method First Edition
ISO
12193
Animal and vegetable fats and oils Determination of lead by direct graphite furnace atomic absorption spectroscopy Second Edition
ISO
12194
Leaf Tobacco - Determination of Strip Particle Size First Edition
ISO
12195
Threshed Tobacco - Determination of Residual Stem Content First Edition
ISO
12197
Woodruff Keyseat Cutters - Dimensions First Edition
ISO
12199
Alphabetical Ordering of Multilingual Terminological and Lexcographical Data Represented in the Latin Alphabet First Edition
Computer Applications in Terminology - Machine-Readable Terminology Interchange Format (MARTIF) - Negotiated Interchange
ISO
12200
First Edition
ISO
12205
Petroleum Products - Determination of the Oxidation Stability of Middle-Distillate Fuels First Edition (CEN EN ISO 12205: 1996)
ISO
12207
Information Technology - Software Life Cycle Processes First Edition; Amendment 1: 5/01/2002; Amendment 2: 11/01/2004
Gas Cylinders - Outlet Connections for Gas Cylinder Valves for Compressed Breathable Air - Part 1: Yoke Type Connections First
ISO
12209-1
Edition
Gas Cylinders - Outlet Connections for Gas Cylinder Valves for Compressed Breathable Air - Part 2: Threaded Connections First
ISO
12209-2
Edition
Gas Cylinders - Outlet Connections for Gas Cylinder Valves for Compressed Breathable Air - Part 3: Adaptor for 230 Bar Valves First
ISO
12209-3
Edition
ISO
12210-1
Cranes - Anchoring Devices for In-Service and Out-of-Service Conditions - Part 1: General First Edition
ISO
12210-4
Cranes - Anchoring Devices for In-Service and Out-Of-Service Conditions - Part 4: Jib Cranes Corrigendum 1: 2000; First Edition
ISO
12213-1
Natural gas Calculation of compression factor Part 1: Introduction and guidelines Second Edition
ISO
12213-2
Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis Second Edition
ISO
12213-3
Natural gas Calculation of compression factor Part 3: Calculation using physical properties Second Edition
ISO
12213-3 DAM 1
Natural Gas - Calculation of compression factor - Part 3: Calculation using physical properties 2005
ISO
12214
Road Vehicles - Direction-of-Motion Stereotypes for Automotive Hand Controls First Edition
Small Craft - Hull Construction and Scantlings - Part 1: Materials: Thermosetting Resins, Glass-Fibre Reinforcement, Reference
ISO
12215-1
Laminate First Edition
Small Craft - Hull Construction and Scantlings - Part 2: Materials: Core Materials for Sandwich Construction, Embedded Materials
ISO
12215-2
First Edition
ISO
12215-3
Small craft - Hull Construction and Scantlings - Part 3: Materials: Steel, Aluminium Alloys, Wood, Other Materials First Edition
ISO
12215-4
Small Craft - Hull Construction and Scantling - Part 4: Workshop and Manufacturing First Edition
ISO
12216
Small Craft - Windows, Portlights, Hatches, Deadlights and Doors - Strength and Watertightness Requirements First Edition
Small Craft - Stability and Buoyancy Assessment and Categorization - Part 1: Non-Sailing Boats of Hull Length Greater than or Equal
ISO
12217-1
to 6 m First Edition
Small Craft - Stability and Buoyancy Assessment and Categorization - Part 2: Sailing Boats of Hull Length Greater than or Equal to 6
ISO
12217-2
m First Edition
ISO
12217-3
Small Craft - Stability and Buoyancy Assessment and Categorization - Part 3: Boats of Hull Length Less Than 6 m First Edition
ISO
12218
Graphic Technology - Process Control - Offset Platemaking First Edition
Cinematography - Manufacturer-Printed, Latent Image Indentification on 16 mm, 35 mm and 65 mm Motion-Picture Film -
ISO
12222
Specifications and Dimensions Third Edition; Corrigendum 1: 02/01/2004
Solder Wire, Solid and Flux Cored - Specification and Test Methods - Part 1: Classification and Performance Requirements First
ISO
12224-1
Edition
ISO
12224-2
Flux Cored Solder Wire - Specification and Test Methods - Part 2: Determination of Flux Content First Edition
Solder wire, solid and flux cored Specifications and test methods Part 3: Wetting balance test method for flux cored solder wire
ISO
12224-3
efficacy First Edition
Animal and Vegatable Fats and Oils - Determination of Individual and Total Sterols Contents - Gas Chromatographic Method First
ISO
12228
Edition
ISO
12230
Polybutene (PB) Pipes - Effect of Time and Temperature on the Expected Strength First Edition
ISO
12231
Photography Electronic still picture imaging Vocabulary Second Edition
Photography Digital still cameras Determination of exposure index, ISO speed ratings, standard output sensitivity, and
ISO
12232
recommended exposure index Second Edition
ISO
12233
Photography - Electronic Still-Picture Cameras - Resolution Measurements First Edition
ISO
12234-1
Electronic Still-Picture Imaging - Removable Memory - Part 1: Basic Removable-Memory Module First Edition
ISO
12234-2
Electronic Still-Picture Imaging - Removable Memory - Part 2: TIFF/EP Image Data Format First Edition
ISO
12236
Geosynthetics Static puncture test (CBR test) Second Edition
ISO
12238
Pneumatic Fluid Power - Directional Control Valves - Measurement of Shifting Time First Edition
ISO
12239
Fire detection and fire alarm systems - Smoke alarms First Edition
Spherical Plain Bearings - Part 1: Radial Spherical Plain Bearings First Edition; This First Edition Cancels and Replaces ISO 6124-
ISO
12240-1
1:1987, ISO 6124-2:1982, ISO 6124-3:1982 and ISO 6125:1982
ISO
12240-2
Spherical Plain Bearings - Part 2: Angular Contact Radial Spherical Plain Bearings First Edition
ISO
12240-3
Spherical Plain Bearings - Part 3: Thrust Spherical Plain Bearings First Edition
ISO
12240-4
Spherical Plain Bearings - Part 4: Spherical Plain Bearing Rod Ends First Edition; Corrigendum 1 07/15/1999
ISO
12241
Thermal Insulation for Building Equipment and Industrial Installations - Calculation Rules First Edition
Medical gloves made from natural rubber latex Determination of water-extractable protein using the modified Lowry method First
ISO
12243
Edition
Information Technology - 8 mm Wide Magnetic Tape Cartridge Dual Azimuth Format for Information Interchange - Helical Scan
ISO
12246
Recording First Edition
Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DATA/DAT-
ISO
12248
DC Format Using 60 m and 90 m Length Tapes First Edition
ISO
12256
Aerospace - Drives, Internal, Cruciform, Ribbed - Metric Series First Edition
Aerospace - Bolts, Reduced Bihexagonal Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated
ISO
12258
or Uncoated, Strength Classes Less Than or Equal to 1 275 MPa - Dimensions First Edition
Aerospace - Screws, Pan Head, Internal Offset Cruciform Ribbed or Unribbed Drive, Stepped Shank, Short or Medium Length MJ
ISO
12260
Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition
Aerospace - Screws, Pan Head, Internal Offset Cruciform Ribbed or Unribbed Drive, Pitch Diameter Shank, Long Length MJ
ISO
12261
Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition
Aerospace - Nuts, Hexagonal, Plain, Reduced Height, Reduced Across Flats, with MJ Threads, Cls: 450 MPa (at Ambient
Temp.)/425 Degs C, 600 MPA (at Ambient Temp.)/235 Degs C, 600 MPa (at Ambient Temp.)/315 Degs C, 600 MPa (at Ambient
Temp.)/650 Degs C, 900 MPa (at Ambient Temp.)/235 Degs C, 900 MPa (at Ambient Temp.)/730 Degs C and 1 100 MPa (at Ambient
ISO
12268
Temp.)/600 Degs C - Dimensions First Edition
Aerospace - Nuts, Anchor, Self-Locking, Floating, Two Lug, with Incremental Counterbore, with MJ Threads, Classifications: 900 MPa
(AT Ambient Temperature)/235 Degrees C, 900 MPa (AT Ambient Temperature)/315 Degrees C and 900 MPa (AT Ambient
ISO
12272
Temperature)/425 Degrees C - Dimensions First Edition
Aerospace - Nuts, Anchor, Self-Locking, Floating, Self-Aligning, Two Lug, with MJ Threads, Classifications: 900 MPa (at Ambient
Temperature/235 Degrees Celsius, 900 MPa (at Ambient Temperature)315 Degrees Celsius and 900 MPa (at Ambient
ISO
12273
Temperature)425 Degrees Celsius - Dimensions First Edition
Aerospace - Nuts, Anchor, Self-Locking, Floating, Self-Aligning, Single Lug, with MJ Threads, Classifications: 900 MPa (at Ambient
Temperature/235 Degrees Celsius, 900 MPa (at Ambient Temperature)315 Degrees Celsius and 900 MPa (at Ambient
ISO
12274
Temperature)425 Degrees Celsius - Dimensions First Edition
Aerospace - Gang Channel, Self-Locking, Floating, Standard Series, with Counterbore, Classifications: 1 100 MPa (at Ambient
Temperature)/120 Degrees C, 1 100 MPa (at Ambient Temperature)/235 Degrees C and 1 100 MPa (at Ambient Temperature)/425
ISO
12277
Degrees C - Dimensions First Edition
Aerospace - Nuts, Barrel, Self-Locking, Floating, Self-Aligning, with MJ Threads, Classifications: 900 MPa (at Ambient
Temperature)/235 Degrees C, 1 100 MPa (at Ambient Temperature)/235 Degrees C, 1 250 MPa (at Ambient Temperature)/235
ISO
12278
Degrees C and 1 550 MPa (at Ambient Temperature)/235 Degrees C - Dimensions First Edition
ISO
12280
Aerospace - Retainers, Spring, Sheet Metal, for Self-Locking Barrel Nuts - Dimensions First Edition
Aerospace - Rivets, Solid, 100 Degree Normal Countersunk Head, in Metallic Material, with or without Surface Treatment -
ISO
12281
Dimensions First Edition
ISO
12288
Aerospace - Rivets, Solid, in Nickel Alloy - Procurement Specification First Edition
ISO
12289
Aerospace Rivets, solid, in corrosion-resisting steel Procurement specification First Edition
ISO
12290
Aerospace - Rivets, Solid, in Titanium or Titanium Alloy - Procurement Specification First Edition
Plain Bearings - Quality Control Techniques and Inspection of Geometrical and Material Quality Characteristics First Edition;
ISO
12301
(Corrigendum 1-1995)
ISO
12302
Plain Bearings - Quality Characteristics - Statistical Process Control (SPC) First Edition
ISO
12303
Plain Bearings - Quality Characteristics - Calculation of Machine and Process Capabilities First Edition
ISO
12306
Plain Bearings - Measurement of Wall Thickness of Thin-Walled Half-Bearings and Thin-Walled Bushes First Edition
ISO
12307-1
Plain Bearings - Wrapped Bushes - Part 1: Checking the Outside Diameter First Edition
ISO
12307-2
Plain Bearings - Checking of Wrapped Bushes - Part 2: Checking the Inside Diameter First Edition
ISO
12308
Plain Bearings - Quality Assurance - Sample Types - Definitions, Applications and Testing First Edition
ISO
12319
Aerospace'P' (loop style) clamps Procurement specification First Edition
ISO
12333
Aerospace - Constant Displacement Hydraulic Motors - General Specifications for 35 000 kPa Systems First Edition
Aerospace - Hydraulic, Pressure-Compensated, Variable Delivery Pumps - General Requirements for 35 000 kPa Systems First
ISO
12334
Edition
ISO
12345
Diesel engines Cleanliness assessment of fuel injection equipment First Edition
Road Vehicles - Traffic Accident Analysis - Part 1: Vocabulary Vehicules Routiers - Analyse Des Accidents De La Circulation - Partie
ISO
12353-1
1: Vocabulaire First Edition
ISO
12353-2
Road vehicles Traffic accident analysis Part 2: Guidelines for the use of impact severity measures First Edition
Commercial road vehicles ù Drawbar couplings and eyes for rigid drawbars ù Part 2: Strength tests for special applications First
ISO
12357-2
Edition
ISO
12357 CORR 1
Commercial road vehicles ù Drawbar couplings and eyes for rigid drawbars ù Strength tests
ISO
12357
Commercial Road Vehicles - Drawbar Couplings and Eyes for Rigid Drawbars - Strength Tests First Edition
ISO
12364
Two-Wheeled Motorcycles - Antilock Braking Systems (ABS) - Tests and Measurement Methods First Edition
ISO
12366
Two-Wheeled Mopeds - Antilock Braking Systems (ABS) - Tests and Measurement Methods First Edition
ISO
12368
Agricultural Vehicles - Mechanical Hook-Type Connections on Towing Vehicles - Test Methods and Requirements First Edition
ISO
12374
Agricultural Irrigation - Wiring and Equipment for Electrically Driven or Controlled Irrigation Machines First Edition
ISO
12401
Small craft Deck safety harness and safety line for use on recreational craft Safety requirements and test methods First Edition
ISO
12402-1
Personal flotation devices Part 1: Lifejackets for seagoing ships Safety requirements First Edition
ISO
12402-2
Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements First Edition
ISO
12402-3
Personal flotation devices Part 2: Lifejackets, performance level 150 Safety requirements First Edition
ISO
12402-4
Personal flotation devices Part 2: Lifejackets, performance level 100 Safety requirements First Edition
ISO
12402-5 CORR 1
Personal flotation devices ù Part 5: Buoyancy aids (level 50) ù Safety requirements TECHNICAL CORRIGENDUM 1 First Edition
ISO
12402-5
Personal flotation devices ù Part 5: Buoyancy aids (level 50) ù Safety requirements First Edition
Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods
ISO
12402-6
First Edition
ISO
12402-7
Personal flotation devices Part 7: Materials and components Safety requirements and test methods First Edition
ISO
12402-8
Personal flotation devices Part 8: Accessories Safety requirements and test methods First Edition
ISO
12402-9
Personal flotation devices Part 9: Test methods First Edition
ISO
12402-10
Personal flotation devices Part 10: Selection and application of personal flotation devices and other relevant devices First Edition
Wood-based panels ù Determination of formaldehyde release ù Part 1: Formaldehyde emission by the 1-cubic-metre chamber
ISO
12460-1
method First Edition
ISO
12465
Plywood ù Specifications First Edition
ISO
12466-1
Plywood - Bonding Quality - Part 1: Test Methods First Edition
ISO
12466-2
Plywood - Bonding Quality - Part 2: Requirements First Edition
ISO
12468-1
External Exposure of Roofs to Fire - Part 1: Test Methods First Edition
ISO
12468-2
External fire exposure to roofs Part 2: Classification of roofs First Edition
ISO
12472
Fire resistance of timber door assemblies Method of determining the efficacy of intumescent seals First Edition
ISO
12473
General principles of cathodic protection in sea water First Edition
ISO
12478-1
Cranes - Maintenance Manual - Part 1: General First Edition
ISO
12480-1
Cranes - Safe Use - Part 1: General First Edition
ISO
12480-3
Cranes Safe use Part 3: Tower cranes First edition
ISO
12480-4
Cranes ù Safe use ù Part 4: Jib cranes First edition
ISO
12482-1
Cranes - Condition Monitoring - Part 1: General First Edition
ISO
12485
Tower Cranes - Stability Requirements First Edition
ISO
12488-1
Cranes Tolerances for wheels and travel and traversing tracks Part 1: General First edition; Supercedes ISO 8306:1985
ISO
12488-4
Cranes Tolerances for wheels and travel and traversing tracks Part 4: Jib cranes First Edition
ISO
12491
Statistical Methods for Quality Control of Building Materials and Components First Edition
ISO
12494
Atmospheric icing of structures First Edition
ISO
12499
Industrial Fans - Mechanical Safety of Fans - Guarding First Edition
ISO
12500-1
Filters for compressed air ù Test methods ù Part 1: Oil aerosols First Edition
ISO
12500-2
Filters for compressed air ù Test methods ù Part 2: Oil vapours First Edition
ISO
12508
Earth-Moving Machinery - Operator Station and Maintenance Areas - Bluntness of Edges First Edition
ISO
12509
Earth-moving machinery Lighting, signalling and marking lights, and reflex-reflector devices Second Edition
ISO
12510
Earth-moving machinery Operation and maintenance Maintainability guidelines First Edition
ISO
12511
Earth-Moving Machinery - Hour Meters First Edition
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 1: Definitions and Description of Componenet Parts First
ISO
12543-1
Edition
ISO
12543-2
Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass First Edition
ISO
12543-3
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 3: Laminated Glass First Edition
ISO
12543-4
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 4: Test Methods for Durability First Edition
ISO
12543-5
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 5: Dimensions and Edge Finishing First Edition
ISO
12543-6
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 6: Appearance First Edition
Thermal Performance of Windows and Doors - Determination of Thermal Transmittance by Hot Box Method - Part 1: Complete
ISO
12567-1
Windows and Doors First Edition
Thermal performance of windows and doors Determination of thermal transmittance by hot box method Part 2: Roof windows and
ISO
12567-2
other projecting windows First Edition
ISO
12569
Thermal Performance of Buildings - Determination of Air Change in Buildings - Tracer Gas Dilution Method First Edition
Hydrothermal Performance of Building Materials and Products - Determination of Moisture Content by Drying at Elevated
ISO
12570
Temperature First Edition
ISO
12571
Hydrothermal Performance of Building Materials and Products - Determination of Hygroscopic Sorption Properties First Edition
ISO
12572
Hygrothermal Performance of Building Materials and Products - Determination of Water Vapour Transmission Properties First Edition
Thermal Insulation - Insulating Materials and Products for Buildings - Conformity Control Systems Part 1: Factory-Made Products
ISO
12576-1
First Edition
ISO
12579
Timber structures ù Glued laminated timber ù Method of test for shear strength of glue lines First Edition
ISO
12580
Timber structures ù Glued laminated timber ù Methods of test for glue-line delamination First Edition
ISO
12606
Cinematography - Care and Preservation of Magnetic Audio Recordings for Motion Pictures and Television First Edition
ISO
12608
Cinematography - Room and Surround Conditions for Evaluating Television Display from Telecine Reproduction First Edition
Cinematography Audio head tones for use in international exchange of 35 mm analogue magnetic film masters Specifications and
ISO
12611
location Second Edition
ISO
12612
Cinematography - Interchange of Post-Production Materials First Edition
ISO
12615
Bibliographic references and source identifiers for terminology work First Edition
ISO
12616
Translation-Oriented Terminography First Edition
ISO
12620
Computer Applications in Terminology - Data Categories First Edition
Tissue paper and tissue products Part 1: General guidance on terms Papier tissu et produits en tissu Partie 1: Lignes directrices
ISO
12625-1
gÚnÚrales relatives aux termes First edition
ISO
12625-3
Tissue paper and tissue products Part 3: Determination of thickness, bulking thickness and apparent bulk density First Edition
Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at break and tensile energy absorption First
ISO
12625-4
Edition
ISO
12625-5
Tissue paper and tissue products Part 5: Determination of wet tensile strength First Edition
ISO
12625-6
Tissue paper and tissue products Part 6: Determination of grammage First Edition
ISO
12625-7
Tissue paper and tissue products ù Part 7: Determination of optical properties First edition
Tissue paper and tissue products Part 8: Water-absorption time and waterabsorption capacity, basket-immersion test method First
ISO
12625-8
edition;
ISO
12625-9
Tissue paper and tissue products Part 9: Determination of ball burst strength First edition
ISO
12634
Graphic Technology - Determination of Tack of Paste Inks and Vehicles by a Rotary Tackmeter First Edition
ISO
12635
Graphic Technology - Plates for Offset Printing - Dimensions First Edition
ISO
12636
Graphic Technology - Blankets for Offset Printing First Edition
ISO
12637-1
Graphic technology Vocabulary Part 1: Fundamental terms First Edition
ISO
12637-5
Graphic Technology - Multilingual Terminology of Printing Arts - Part 5: Screen Printing Terms First Edition
Graphic technology ù Prepress digital data exchange ù Tag image file format for image technology (TIFF/IT) AMENDMENT 1: Use of
ISO
12639 AMD 1
JBIG2-Amd2 compression in TIFF/IT
ISO
12639
Graphic Technology - Prepress Digital Data Exchange - Tag Image File Format for Image Technology (TIFF/IT) Second Edition
Graphic Technology - Prepress Digital Data Exchange - CMYK Standard Colour Image Data (CMYK/SCID) First Edition; Technical
ISO
12640
Corrigendum 1: 09/15/04
Graphic technology Prepress digital data exchange Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID) First
ISO
12640-2
Edition
ISO
12640-3
Graphic technology ù Prepress digital data exchange ù Part 3: CIELAB standard colour image data (CIELAB/SCID) First Edition
ISO
12641
Graphic Technology - Prepress Digital Data Exchange - Colour Targets for Input Scanner Calibration First Edition
Graphic technology - Input data for characterization of 4-colour process printing Part 1: Initial data set First Edition; Corrigendum
ISO
12642
1:10/1/2005
ISO
12642-2
Graphic technology Input data for characterization of 4-colour process printing Part 2: Expanded data set First Edition
Graphic technology ù Safety requirements for graphic technology equipment and systems ù Part 1: General requirements First
ISO
12643-1
Edition [: ISO 12648, ISO 12648, ISO 12649]
Graphic technology ù Safety requirements for graphic technology equipment and systems ù Part 2: Press equipment and systems
ISO
12643-2
First Edition [Superseded: ISO 12648, ISO 12648]
ISO
12644
Graphic Technology - Determination of Rheological Properties of Paste Inks and Vehicles by the Falling Rod Viscometer First Edition
Graphic Technology - Process Control - Certified Reference Material for Opaque Area Calibration of Transmission Densitometers
ISO
12645
First Edition
ISO
12646
Graphic technology Displays for colour proofing Characteristics and viewing conditions First Edition
Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 1:
ISO
12647-1
Parameters and measurement methods Second Edition
Graphic technology ù Process control for the production of half-tone colour separations, proof and production prints ù Part 2: Offset
ISO
12647-2 AMD 1
lithographic processes Second edition
Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 2: Offset
ISO
12647-2
lithographic processes Second Edition
Graphic technology - Process control for the production of half-tone colour separations, proofs and production prints - Part 3: Coldset
ISO
12647-3
offset lithography on newsprint Second Edition
Graphic technology - Process control for the production of half-tone colour separations, proofs and production prints - Part 4:
ISO
12647-4
Publication gravure printing First Edition
Graphic Technology - Process Control for the Manufacture of Half-Tone Colour Separations, Proof and Production Prints - Part 5:
ISO
12647-5
Screen Printing First Edition
Graphic technology Process control for the production of half-tone colour separations, proofs and production prints Part 6:
ISO
12647-6
Flexographic printing First Edition
ISO
12650
Document Imaging Applications - Microfilming of Achromatic Maps on 35 mm Microfilm First Edition
ISO
12651
Electronic Imaging - Vocabulary Imagerie Electronique - Vocabulaire First Edition
ISO
12653-1
Electronic Imaging - Test Target for the Black-and-White Scanning of Office Documents - Part 1: Characteristics First Edition
Electronic Imaging - Test Target for the Black-and-White Scanning of Office Documents - Part 2: Method of Use First Edition;
ISO
12653-2
Technical Corrigendum 1 3/1/2002
ISO
12656
Micrographics - Use of Bar Codes on Aperture Cards First Edition
ISO
12667
Commercial Vehicles and Buses - Cross-Tooth Propeller Shaft Flanges, Type T First Edition
ISO
12676
Refractory Products - Determination of Resistance to Carbon Monoxide First Edition
ISO
12677
Chemical Analysis of Refractory Products by XRF - Fused Cast Bead Method First Edition
Refractory Products - Measurement of Dimensions and External Defects of Refractory Bricks - Part 1: Dimensions and Conformity to
ISO
12678-1
Drawings First Edition
Refractory Products - Measurement of Dimensions and External Defects of Refractory Bricks - Part 2: Corner and Edge Defects and
ISO
12678-2
Other Surface Imperfections First Edition
Methods of test for refractory products Part 1: Determination of dynamic Young s modulus (MOE) by impulse excitation of vibration
ISO
12680-1
First Edition
ISO
12683
Mechanically deposited coatings of zinc Specification and test methods First Edition
Metallic and Other Inorganic Coatings - Automated Controlled Shot-Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel or
ISO
12686
Chromium Plating, or as a Final Finish First Edition
ISO
12687
Metallic Coatings - Porosity Tests - Humid Sulfur (Flowers of Sulfur) Test First Edition
Non-Destructive Testing - Terminology - Terms Used in Penetrant Testing Essais Non Destructifs - Terminologie - Termes Utilises En
ISO
12706
Controle Par Ressuage First Edition
ISO
12710
Non-Destructive Testing - Ultrasonic Inspection - Evaluating Electronic Characteristics of Ultrasonic Test Instruments First Edition
ISO
12713
Non-Destructive Testing - Acoustic Emission Inspection - Primary Calibration of Transducers First Edition
ISO
12714
Non-Destructive Testing - Acoustic Emission Inspection - Secondary Calibration of Acoustic Emission Sensors First Edition
Ultrasonic Non-Destructive Testing - Reference Blocks and Test Procedures for the Characterization of Contact Search Unit Beam
ISO
12715
Profiles First Edition
ISO
12716
Non-Destructive Testing - Acoustic Emission Inspection - Vocabulary First Edition
ISO
12721
Non-Destructive Testing - Thermal Neutron Radiographic Testing - Determination of Beam L/D Ratio First Edition
ISO
12725
Nickel and Nickel Alloy Castings First Edition
Corrosion of metals and alloys Electrochemical potentiokinetic reactivation measurement using the double loop method (based on
ISO
12732
ihal's method) First Edition
ISO
12737
Metallic materials Determination of plane-strain fracture toughness Second Edition
ISO
12739
Zinc sulfide concentrates Determination of zinc Ion-exchange/EDTA titrimetric method Second Edition
Lead Sulfide Concentrates - Determination of Silver and Gold Contents - Fire Assay and Flame Atomic Absorption Spectrometric
ISO
12740
Method Using Scorification or Cupellation First Edition
ISO
12742
Copper, lead, and zinc sulfide concentrates ù Determination of transportable moisture limits ù Flow-table method Second Edition
ISO
12743
Copper, lead, zinc and nickel concentrates Sampling procedures for determination of metal and moisture content Second Edition
ISO
12744
Copper, lead, zinc and nickel concentrates Experimental methods for checking the precision of sampling Second Edition
ISO
12745
Copper, Lead and Zinc Ores and Concentrates - Precision and Bias of Mass Measurement Techniques First Edition
Drawing and Writing Instruments - Ball Point Pens and Roller Ball Pens - Vocabulary Instruments De Dessin Et D'Ecriture - Stylos A
ISO
12756
Bille Et Stylos Rollers - Vocabulaire First Edition
ISO
12757-1
Ball Point Pens and Refills - Part 1: General Use First Edition
ISO
12757-2
Ball Point Pens and Refills - Part 2: Documentary Use (DOC) First Edition
ISO
12771
Plastics Laboratory Ware - Disposable Serological Pipettes First Edition
ISO
12772
Laboratory Glassware - Disposable Microhaematocrit Capillary Tubes First Edition
ISO
12775
Guidelines on Types of Glass of Normal Bulk-Production Composition and Their Test Methods First Edition
Methods of Tests for Pallet Joints - Part 1: Determination of Bending Resistance of Pallet Nails, Other Dowel-Type Fasteners and
ISO
12777-1
Staples First Edition
Methods of Tests for Pallet Joints - Part 2: Determination of Withdrawl and Head Pull-Through Resistance of Pallet Nails and Staples
ISO
12777-2
First Edition
ISO
12777-3
Methods of test for pallet joints Part 3: Determination of strength of pallet joints First Edition
ISO
12789
Reference Neutron Radiations - Characteristics and Methods of Production of Simulated Workplace Neutron Fields First Edition
ISO
12790-1
Radiation Protection - Performance Criteria for Radiobioassay - Part 1: General Principles First Edition
ISO
12794
Nuclear Energy - Radiation Protection - Individual Thermoluminescence Dosemeters for Extremities and Eyes First Edition
Nuclear fuel technology Uranium dioxide powder and pellets Determination of uranium and oxygen/uranium ratio by gravimetric
ISO
12795
method with impurity correction First Edition
Nuclear fuel technology Guide to the measurement of the specific surface area of uranium oxide powders by the BET method First
ISO
12800
Edition
ISO
12803
Representative Sampling of Plutonium Nitrate Solutions for Determination of Plutonium Concentration First Edition
ISO
12807
Safe Transport of Radioactive Materials - Leakage Testing on Packages First Edition
ISO
12819
Methods of Evaluation of the Battery Life of a Battery-Powered Watch First Edition; Corrigendum 1: 11-01-99
ISO
12844
Raw Optical Glass - Grindability with Diamond Pellets - Test Method and Classifiction First Edition
ISO
12853
Optics and Optical Instruments - Microscopes - Information Provided to the User First Edition
ISO
12858-1
Optics and Optical Instruments - Ancillary Devices for Geodetic Instruments - Part 1: Invar Levelling Staffs First Edition
ISO
12858-2
Optics and Optical Instruments - Ancillary Devices for Geodetic Instruments - Part 2: Tripods First Edition
ISO
12858-3
Optics and optical instruments Ancillary devices for geodetic instruments Part 3: Tribrachs First Edition
ISO
12864
Opthalmic Optics - Contact lenses - Determination of Scattered Light First Edition
ISO
12865
Ophthalmic instruments Retinoscopes Second Edition
ISO
12866
Ophthalmic Instruments - Perimeters First Edition; Corrected and Reprinted 12-01-1999
ISO
12867
Ophthalmic Instruments - Trial Frames First Edition
ISO
12870
Ophthalmic optics Spectacle frames Requirements and test methods Second Edition; Replaces ISO 9456:1991
Ambient Air - Determination of Total (Gas and Particle-Phase) Polycyclic Aromatic Hydrocarbons - Collection on Sorbent-Backed
ISO
12884
Filters with Gas Chromatographic/Mass Spectrometric Analyses First Edition
ISO
12890
Water Quality - Determination of Toxicity to Embryos and Larvae of Freshwater Fish - Semi-Static Method First Edition
ISO
12891-1
Retrieval and Analysis of Surgical Implants - Part 1: Retrieval and Handling First Edition
ISO
12891-2
Retrieval and Analysis of Surgical Implants - Part 2: Analysis of Retrieved Metallic Surgical Implants First Edition
ISO
12891-3
Retrieval and Analysis of Surgical Implants - Part 3: Analysis of Retrieved Polymeric Surgical Implants First Edition
ISO
12891-4
Retrieval and Analysis of Surgical Implants - Part 4: Analysis of Retrieved Ceramic Surgical Implants First Edition
Ergonomics of the Thermal Environment - Medical Supervision of Individuals Exposed to Extreme Hot or Cold Environments First
ISO
12894
Edition
ISO
12900
Hard Coal - Determination of Abrasiveness First Edition; Corrected and Reprinted 09/15/1998
ISO
12917-1
Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods First Edition
Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 2: Internal Electro-Optical Distance-
ISO
12917-2
Ranging Method First Edition
Lubricants, Industrial Oils and Related Products (Class L) - Family H (Hydraulic Systems) - Specifications for Categories HFAE,
ISO
12922
HFAS, HFB, HFC, HFDR and HFDU First Edition; Technical Corrigendum 1: 02/01/2001
Lubricants, Industrial Oils and Related Products (Class L) - Family C (Gears) - Part 1: Specifications for Lubricants for Enclosed Gear
ISO
12925-1
Systems First Edition; Corrigendum 1: 02/15/2002
ISO
12937
Petroleum Products - Determination of Water - Coulometric Karl Fischer Titration Method First Edition
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 1: General Introduction First
ISO
12944-1
Edition
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 2: Classification of Environments
ISO
12944-2
First Edition
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 3: Design Considerations First
ISO
12944-3
Edition
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 4: Types of Surface and Surface
ISO
12944-4
Preparation First Edition
Paints and varnishes ù Corrosion protection of steel structures by protective paint systems ù Part 5: Protective paint systems Second
ISO
12944-5
Edition
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 6: Laboratory Performance Test
ISO
12944-6
Methods First Edition
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 7: Execution and Supervision of
ISO
12944-7
Paint Work First Edition
Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 8: Development of Specifications
ISO
12944-8
for New Work and Maintenance First Edition
ISO
12945-1
Textiles - Determination of Fabric Propensity to Surface Fuzzing and to Pilling - Part 1: Pilling Box Method First Edition
ISO
12945-2
Textiles - Determination of Fabric Propensity to Surface Fuzzing and to Pilling - Part 2: Modified Martindale Method First Edition
Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 1: Martindale Abrasion Testing
ISO
12947-1
Apparatus First Edition; Technical Corrigendum 1; 11/01/2002
Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 2: Determination of Specimen
ISO
12947-2
Breakdown First Edition; Technical Corrigendum 1: 11/01/2002
Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 3: Determination of Mass Loss First
ISO
12947-3
Edition; Technical Corrigendum 1: 11/01/2002
Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 4: Assessment of Appearance
ISO
12947-4
Change First Edition; Technical Corrigendum 1: 11/01/02
ISO
12951
Textile Floor Coverings - Determination of Mass Loss Using the Lisson Test First Edition
Textiles - Burning Behaviour of Bedding Items - Part 1: General Test Methods for the Ignitability by a Smouldering Cigarette First
ISO
12952-1
Edition
Textiles - Burning Behaviour of Bedding Items - Part 2: Specific Test Methods for the Ignitability by a Smouldering Cigarette First
ISO
12952-2
Edition
ISO
12952-3
Textiles - Burning Behaviour of Bedding Items - Part 3: General Test Methods for the Ignitability by a Small Open Flame First Edition
ISO
12952-4
Textiles - Burning Behaviour of Bedding Items - Part 4: Specific Test Methods for the Ignitability by a Small Open Flame First Edition
ISO
12956
Geotextiles and Geotextile-Related Products - Determination of the Characteristic Opening Size First Edition
ISO
12957-1
Geosynthetics Determination of friction characteristics Part 1: Direct shear test First Edition
ISO
12957-2
Geosynthetics Determination of friction characteristics Part 2: Inclined plane test First Edition
ISO
12958
Geotextiles and Geotextile-Related Products - Determination of Water Flow Capacity in Their Plane First Edition
ISO
12965
Butadiene Rubber - Determination of Microstructure by Infra-Red Spectrometry First Edition; Corrigendum 1: 04/15/2006
Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Determination of Volatile Matter Content First
ISO
12977
Edition
Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Determination of C/H Ratio in the Quinoline-
ISO
12979
Insoluble Fraction First Edition
Carbonaceous Materials Used in the Production of Aluminium - Green Coke and Calcined Coke for Electrodes - Analysis Using an X-
ISO
12980
Ray Fluorescence Method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Calcined Coke - Determination of the Reactivity to Carbon Dioxide -
ISO
12981-1
Part 1: Loss in Mass Method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Calcined Coke - Determination of the Reactivity to Air - Part 1:
ISO
12982-1
Ignition Temperature Method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Calcined Coke - Determination of Particle Size Distribution First
ISO
12984
Edition
Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes and Cathode Blocks - Part 1: Determination of
ISO
12985-1
Apparent Density Using a Dimensions Method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes and Cathode Blocks - Part 2: Determination of
ISO
12985-2
Apparent Density and of Open Porosity Using a Hydrostatic Method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Prebaked Anodes and Cathode Blocks - Part 1: Determination of
ISO
12986-1
Bending/Shear Strength by a Three-Point Method First Edition
Carbonaceous materials used in the production of aluminium Prebaked anodes and cathode blocks Part 2: Determination of flexural
ISO
12986-2
strength by the four-point method First Edition
Carbonaceous materials for the production of aluminium Anodes, cathodes blocks, sidewall blocks and baked ramming pastes
ISO
12987
Determination of the thermal conductivity using a comparative method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes - Determination of the Reactivity to Carbon Dioxide -
ISO
12988-1
Part 1: Loss in Mass Method First Edition
Carbonaceous materials used in the production of aluminium Baked anodes Determination of the reactivity to carbon dioxide Part 2:
ISO
12988-2
Thermogravimetric method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes and Sidewall Blocks - Determination of the Reactivity
ISO
12989-1
to Air- Part 1: Loss in Mass Method First Edition
Carbonaceous Materials Used in the Production of Aluminium - Baked Anodes and Sidewall Blocks - Determination of the Reactivity
ISO
12989-2
to Air- Part 2: Thermogravimetric method First Edition
ISO
12992
Plastics - Vertical Flame Spread Determination for Film and Sheet First Edition
ISO
13000-1
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation Second Edition
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of
ISO
13000-2
properties Second Edition
ISO
13002
Carbon Fibre - Designation System for Filament Yarns First Edition
ISO
13003
Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions First Edition
ISO
13006
Ceramic Tiles - Definitions, Classification, Characteristics and Marking First Edition
Ceramic tiles ù Grouts and adhesives ù Part 1: Terms, definitions and specifications for adhesives TECHNICAL CORRIGENDUM 1
ISO
13007-1 CORR 1
First Edition
ISO
13007-1
Ceramic tiles ù Grouts and adhesives ù Part 1: Terms, definitions and specifications for adhesives First Edition
ISO
13007-2 CORR 1
Ceramic tiles ù Grouts and adhesives ù Part 2: Test methods for adhesives TECHNICAL CORRIGENDUM 1 First Edition
ISO
13007-2
Ceramic tiles Grouts and adhesives Part 2: Test methods for adhesives First Edition
ISO
13007-3
Ceramic tiles Grouts and adhesives Part 3: Terms, definitions and specifications for grouts First Edition
ISO
13007-4
Ceramic tiles Grouts and adhesives Part 4: Test methods for grouts First Edition
ISO
13012
Rolling Bearings, Linear Motion, Recirculating Ball, Sleeve Type - Accessories First Edition; Corrigendum 1: 04/15/1999
Test conditions for numerically controlled turning machines and turning centres Part 1: Geometric tests for machines with a
ISO
13041-1
horizontal workholding spindle First Edition
Test conditions for numerically controlled turning machines and turning centres Part 4: Accuracy and repeatability of positioning of
ISO
13041-4
linear and rotary axes First Edition
Test conditions for numerically controlled turning machines and turning centres Part 5: Accuracy of feeds, speeds and interpolations
ISO
13041-5
First Edition
ISO
13041-6
Test conditions for numerically controlled turning machines and turning centres Part 6: Accuracy of a finished test piece First edition
Test conditions for numerically controlled turning machines and turning centres Part 7: Evaluation of contouring performance in the
ISO
13041-7
coordinate planes First Edition
ISO
13041-8
Test conditions for numerically controlled turning machines and turning centres Part 8: Evaluation of thermal distortions First Edition
ISO
13050
Curvilinear Toothed Synchronous Belt Drive Systems First Edition
Mechanical Vibration and Shock - Guidance on Safety Aspects of Tests and Experiments with People - Part 1: Exposure to Whole-
ISO
13090-1
Body Mechanical Vibration and Repeated Shock First Edition
Mechanical Vibration - Vibrotactile Perception Thresholds for the Assessment of Nerve Dysfunction - Part 1: Methods of
ISO
13091-1
Measurement at the Fingertips First Edition
Mechanical vibration Vibrotactile perception thresholds for the assessment of nerve dysfunction Part 2: Analysis and interpretation
ISO
13091-2
of measurements at the fingertips First Edition
ISO
13200
Cranes - Safety Signs and Hazard Pictorials - General Principles First Edition
ISO
13202
Cranes - Measurement of Velocity and Time Parameters First Edition
Chains, sprockets and accessories List of equivalent terms Cha¯ nes, roues dentÚes et accessoires Liste des termes Úquivalents
ISO
13203
Cha¯ nes, roues dentÚes et accessoires Liste des termes Úquivalents First Edition
Information Technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for
ISO
13210
Measuring Conformance to POSIX Standards Second Edition; IEEE Std 2003
ISO
13211-1
Information Technology - Programming Languages - Prolog - Part 1: General Core First Edition
ISO
13211-2
Information Technology - Programming Languages - Prolog - Part 2: Modules First Edition
Ophthalmic Optics - Contact Lens Care Products - Guidelines for Determination of Shelf-Life First Edition; Corrected and Reprinted
ISO
13212
12-01-1999
Information Technology - Microprocessor Systems - Control and Status Registers (CSR) Architecture for Microcomputer Buses First
ISO
13213
Edition; ANSI/IEEE 1212
ISO
13215-1
Road vehicles Reduction of misuse risk of child restraint systems Part 1: Forms for field studies First Edition
Road Vehicles - Reduction of Misuse Risk of Child Restraint Systems - Part 2: Requirements and Test Procedures for Correct
ISO
13215-2
Installation (Panel Method) First Edition
Road Vehicles - Reduction of Misuse Risk of Child Restraint Systems - Part 3: Prediction and Assessment of Misuse by Misuse Mode
ISO
13215-3
and Effect Analysis (MMEA) First Edition
Road vehicles Anchorages in vehicles and attachments to anchorages for child restraint systems Part 1: Seat bight anchorages and
ISO
13216-1
attachments First Edition; Amendment 1: 02/15/2006; Amendment 3: 07/01/2006
Road vehicles Anchorages in vehicles and attachments to anchorages for child restraint systems Part 2: Top tether anchorages and
ISO
13216-2
attachments First Edition
Road vehicles Anchorages in vehicles and attachments to anchorages for child restraint systems Part 3: Classification of child
ISO
13216-3
restraint dimensions and space in vehicle First Edition
ISO
13218
Road Vehicles - Child Restraint Systems - Report Form for Accidents Involving Child Passengers First Edition
Rubber ù Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers TECHNICAL
ISO
13226 CORR 1
CORRIGENDUM 1 Second Edition
ISO
13226
Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 1:
ISO
13232-1
Definitions, symbols and general considerations Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 2:
ISO
13232-2
Definition of impact conditions in relation to accident data Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 3:
ISO
13232-3
Motorcyclist anthropometric impact dummy Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 4:
ISO
13232-4
Variables to be measured, instrumentation and measurement procedures Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 5:
ISO
13232-5
Injury indices and risk/benefit analysis Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 6: Full-
ISO
13232-6
scale impact-test procedures Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 7:
ISO
13232-7
Standardized procedures for performing computer simulations of motorcycle impact tests Second Edition
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 8:
ISO
13232-8
Documentation and reports Second Edition
ISO
13235-1
Information Technology - Open Distributed Processing - Trading Function: Specification First Edition
Information Technology - Open Distributed Processing - Trading Function - Part 3: Provision of Trading Function Using OSI Directory
ISO
13235-3
Service First Edition; Technical Corrigendum 1: 06/15/2006
ISO
13236
Information Technology - Quality of Service: Framework First Edition
ISO
13238-3
Information Technology - Data Management - Part 3: IRDS Export/Import Facility First Edition
Information Technology - Telecommunications and Information Exchange between Systems - High-Level Data Link Control (HDLC)
ISO
13239
Procedures Third Edition; Replaces ISO/IEC 3309, 7809, 8471, and 8885
Information Technology Document Description and Processing Languages Interchange Standard for Multimedia Interactive
ISO
13240
Documents (ISMID) First Edition; Technical Corrigendum 1: 3/15/2003
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network -
ISO
13241
Inter-Exchange Signalling Protocol - Route Restriction Class Additional Network Feature First Edition
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network -
ISO
13242
Specification, Functional Model and Information Flows - Route Restriction Class Additional Network Feature First Edition
Information Technology - Open Distributed Management Architecture First Edition; Amendment 1: 09/01/1999; Support Using
ISO
13244
Common Object Request Broker Architecture (CORBA)
|
||
|
|
|