|
|
ISO
8985
Plastics - Ethylene/Vinyl Acetate Copolymer (EVAC) Thermoplastics - Determination of Vinyl Acetate Content Second Edition
ISO
8986-1
Plastics - Polybutene (PB) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications First Edition
Plastics - Polybutene (PB) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties
ISO
8986-2
First Edition; Amendment: 06/05/2000
ISO
8987
Plastics - Phenolic Resins - Determination of Reactivity on a B-Transformation Test Plate Third Edition
Plastics - Phenolic Resins - Determination of Plastics Phenolic resins Determination of hexamethylenetetramine content Kjeldahl
ISO
8988
method, perchloric acid method and hydrochloric acid method Third Edition
ISO
8989
Plastics - Liquid Phenolic Resins - Determination of Water Miscibility Second Edition
Thermal Insulation - Determination of Steady-State Thermal Transmission Properties -Calibrated and Guarded Hot Box First Edition
ISO
8990
CEN EN ISO 8990: 1996
ISO
8991
Designation System for Fasteners First Edition
ISO
8992
Fasteners General requirements for bolts, screws, studs and nuts Second Edition
ISO
8993
Anodized Aluminium and Aluminium Alloys - Rating System for the Evaluation of Pitting Corrosion - Chart Method First Edition
ISO
8994
Anodized Aluminium and Aluminium Alloys - Rating System for the Evaluation of Pitting Corrosion - Grid Method First Edition
ISO
8995-3
Lighting of work places Part 3: Lighting requirements for safety and security of outdoor work places First Edition; CIE S 016/E
ISO
8995 CORR 1
Lighting of indoor work places TECHNICAL CORRIGENDUM 1 Second Edition
ISO
8995
Lighting of indoor work places Second Edition
ISO
8996
Ergonomics of the thermal environment Determination of metabolic rate Second Edition
ISO
8999
Reciprocating Internal Combustion Engines - Graphical Symbols Second Edition
ISO
9000
Quality Management Systems - Fundamentals and Vocabulary Third Edition
ISO
9001
Quality Management Systems - Requirements Third Edition; Supersedes ISO 9002:1994 and ISO 9003:1994
ISO
9004
Quality Management Systems - Guidelines for Performance Improvements Second Edition; Supersedes ISO 9004-1:1994
Nuclear energy ù Uranium dioxide powder and sintered pellets ù Determination of oxygen/uranium atomic ratio by the amperometric
ISO
9005
method Second Edition
Uranium Metal and Uranium Dioxide Powder and Pellets - Determination of Nitrogen Content - Method Using Ammonia- Sensing
ISO
9006
Electrode First Edition
ISO
9008
Glass Bottles - Verticality - Test Method First Edition (CEN 29008: 1994)
Glass Containers - Height and Non-Parallelism of Finish with Reference to Container Base - Test Methods First Edition (CEN EN
ISO
9009
29009: 1994)
ISO
9010
Synchronous Belt Drives - Automotive Belts Second Edition
ISO
9011
Synchronous Belt Drives - Automotive Pulleys Second Edition
ISO
9012
Gas Welding Equipment - Air-Aspirated Hand Blowpipes - Specifications and Tests Second Edition
ISO
9013
Thermal Cutting - Classification of Thermal Cuts - Geometrical Product Specification and Quality Tolerances Second Edition
ISO
9015-1
Destructive Tests on Welds in Metallic Materials - Hardness Testing - Part 1: Hardness Test on Arc Welded Joints First Edition
ISO
9015-2
Destructive tests on welds in metallic materials Hardness testing Part 2: Microhardness testing of welded joints First Edition
Destructive Tests on Welds in Metallic Materials - Impact Tests - Test Specimen Location, Notch Orientation and Examination First
ISO
9016
Edition
ISO
9017
Destructive Tests on Welds in Metallic Materials - Fracture Test First Edition
ISO
9018
Destructive tests on welds in metallic materials Tensile test on cruciform and lapped joints First Edition
ISO
9019
Securities - Numbering of Certificates Second Edition
ISO
9021
Motorcycles - Controls - Types, Positions and Functions First Edition
ISO
9022-1
Optics and Optical Instruments - Environmental Test Methods - Part 1: Definitions, Extent of Testing First Edition
ISO
9022-2
Optics and Optical Instruments - Environmental Test Methods - Part 2: Cold, Heat, Humidity Second Edition
ISO
9022-3
Optics and Optical Instruments - Environmental Test Methods - Part 3: Mechanical Stress Second Edition
ISO
9022-4
Optics and Optical Instruments - Environmental Test Methods - Part 4: Salt Mist Second Edition
ISO
9022-5
Optics and Optical Instruments - Environmental Test Methods - Part 5: Combined Cold, Low Air Pressure First Edition
ISO
9022-6
Optics and Optical Instruments - Environmental Test Methods - Part 6: Dust First Edition
ISO
9022-7
Optics and photonics Environmental test methods Part 7: Resistance to drip or rain Second Edition
ISO
9022-8
Optics and Optical Instruments - Environmental Test Methods - Part 8: High Pressure, Low Pressure, Immersion First Edition
ISO
9022-9
Optics and Optical Instruments - Environmental Test Methods - Part 9: Solar Radiation First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 10: Combined Sinusoidal Vibration and Dry Heat or Cold Second
ISO
9022-10
Edition
ISO
9022-11
Optics and Optical Instruments - Environmental Test Methods - Part 11: Mould Growth First Edition
ISO
9022-12
Optics and Optical Instruments - Environmental Test Methods - Part 12: Contamination First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 13: Combined Shock, Bump or Free Fall and Dry Heat or Cold
ISO
9022-13
Second Edition
ISO
9022-14
Optics and Optical Instruments - Environmental Test Methods - Part 14: Dew, Hoarfrost, Ice First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 15: Combined Digitally Controlled Broad-Band Random Vibration
ISO
9022-15
and Dry Heat or Cold Second Edition
Optics and Optical Instruments - Environmental Test Methods - Part 16: Combined Bounce or Steady-State Acceleration and Dry
ISO
9022-16
Heat or Cold Second Edition
ISO
9022-17
Optics and Optical Instruments - Environmental Test Methods - Part 17: Combined Contamination, Solar Radiation First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 18: Combined Damp Heat and Low Internal Pressure First
ISO
9022-18
Edition
Optics and Optical Instruments - Environmental Test Methods - Part 19: Temperature Cycles Combined with Sinusoidal or Random
ISO
9022-19
Vibration First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 20: Humid Atmosphere Containing Sulfur Dioxide or Hydrogen
ISO
9022-20
Sulfide First Edition
Optics and Optical Instruments - Environmental Test Methods - Part 21: Combined Low Pressure and Ambient Temperature or Dry
ISO
9022-21
Heat First Edition
ISO
9026
Raw rubber or unvulcanized compounds ù Determination of green strength Second Edition
ISO
9028
Rubber Dissolution by acid digestion Second Edition
ISO
9029
Crude Petroleum - Determination of Water - Distillation Method First Edition (CEN EN ISO 9029: 1995)
ISO
9030
Crude Petroleum - Determination of Water and Sediment - Centrifuge Method First Edition
ISO
9031
Air Cargo Equipment - Handling Systems for Unit Load Devices (ULDs) - Symbols for Pictorial Representation First Edition
ISO
9033
Aluminium Ores - Determination of the Moisture Content of Bulk Material First Edition
ISO
9034
Hot-Rolled Structural Steel Wide Flats - Tolerances on Dimensions and Shape First Edition
ISO
9035
Iron Ores - Determination of Acid-Soluble Iron(II) Content - Titrimetric Method First Edition
ISO
9036
Information Processing - Arabic 7-Bit Coded Character Set for Information Interchange First Edition
ISO
9038
Test for Sustained Combustibility of Liquids First Edition
Optics and optical instruments Quality evaluation of optical systems Determination of distortion First Edition;
ISO
9039
Corrigendum:07/01/2004
ISO
9040
Information Technology - Open Systems Interconnection - Virtual Terminal Basic Class Service Second Edition
Information Technology - Open Systems Interconnection - Virtual Terminal Basic Class Protocol - Part 1: Specification Second
ISO
9041-1
Edition
Information Technology - Open Systems Interconnection - Virtual Terminal Basic Class Protocol - Part 2: Protocol Implementation
ISO
9041-2
Conformance Statement (PICS) Proforma Second Edition
ISO
9042
Steels - Manual Point Counting Method for Statistically Estimating the Volume Fraction of a Constituent with a Point Grid First Edition
ISO
9043
Mopeds - Measurement Method for Moments of Inertia First Edition
ISO
9044
Industrial Woven Wire Cloth - Technical Requirements and Testing Second Edition
ISO
9045
Industrial Screens and Screening - Vocabulary First Edition
Building Construction - Jointing Products - Determination of Adhesion/Cohesion Properties of Sealants at Constant Temperature
ISO
9046
Second Edition
Building Construction - Jointing Products - Determination of Adhesion/Cohesion Properties of Sealants at Variable Temperatures
ISO
9047
Second Edition
ISO
9048
Building Construction - Jointing Products - Determination of Extrudability of Sealants Using Standardized Apparatus First Edition
Glass in Building - Determination of Light Transmittance, Solar Direct Transmittance, Total Solar Energy Transmittance, Ultraviolet
ISO
9050
Transmittance and Related Glazing Factors Second Edition
Glass in Building - Fire-Resistant Glazed Assemblies Containing Transparent or Translucent Glass, for Use in Building Second
ISO
9051
Edition
ISO
9052-1
Acoustics - Determination of Dynamic Stiffness - Part 1: Materials Used Under Floating Floors in Dwellings First Edition
ISO
9053
Acoustics - Materials for Acoustical Applications - Determination of Airflow Resistance First Edition; (CEN EN 29053 : 1993)
ISO
9054
Cellular Plastics, Rigid - Test Methods for Self- Skinned, High-Density Materials First Edition
Carbonaceous Materials for the Production of Aluminium - Pitch for Electrodes - Determination of Sulfur Content by the Bomb Method
ISO
9055
First Edition
ISO
9057
Glass Containers - 28 mm Tamper-Evident Finish for Pressurized Liquids - Dimensions First Edition; Corrigendum 1: 4/1/2006
ISO
9058
Glass Containers - Tolerances First Edition
ISO
9059
Solar Energy - Calibration of Field Pyrheliometers by Comparison to a Reference Pyrheliometer First Edition
Solar Energy - Specification and Classification of Instruments for Measuring Hemispherical Solar and Direct Solar Radiation First
ISO
9060
Edition
Acid-Grade and Ceramic- Grade Fluorspar - Determination of Iron Content - 1,10- Phenanthroline Spectrometric Method Second
ISO
9061
Edition
ISO
9062
Acid-Grade and Ceramic- Grade Fluorspar - Determination of Manganese Content - Periodate Spectrometric Method Second Edition
ISO
9066-1
Information Processing Systems - Text Communication - Reliable Transfer - Part 1: Model and Service Definition First Edition
ISO
9066-2
Information Processing Systems - Text Communication - Reliable Transfer - Part 2: Protocol Specification First Edition
Information Technology - Open Systems Interconnection - Reliable Transfer: Protocol Implementation Conformance Statement
ISO
9066-3
(PICS) Proforma First Edition
ISO
9069
Information Processing - SGML Support Facilities - SGML Document Interchange Format (SDIF) First Edition
Information Technology - SGML Support Facilities - Registration Procedures for Public Text Owner Identifiers Second Edition; CEN
ISO
9070
EN 29070: 1992; AS/NZS 4097: 1993
Information Processing Systems - Text Communication - Remote Operations - Part 1: Model, Notation and Service Definition First
ISO
9072-1
Edition; NZS/ISO/IEC 9072.1: 1989
Information Processing Systems - Text Communication - Remote Operations - Part 2: Protocol Specification First Edition;
ISO
9072-2
NZS/ISO/IEC 9072.2: 1989
Information Technology - Open Systems Interconnection - Remote Operations: Protocol Implementation Conformance Statement
ISO
9072-3
(PICS) Proforma First Edition
ISO
9073-1
Textiles - Test Methods for Nonwovens - Part 1: Determination of Mass per Unit Area First Edition
ISO
9073-2
Textiles - Test Methods for Nonwovens - Part 2: Determination of Thickness Second Edition; Technical Corrigendum 1: 12-01-1998
ISO
9073-3
Textiles - Test Methods for Nonwovens - Part 3: Determination of Tensile Strength and Elongation First Edition
ISO
9073-4
Textiles - Test Methods for Nonwovens - Part 4: Determination of Tear Resistance Second Edition
ISO
9073-6
Textiles - Test Methods for Nonwovens - Part 6: Absorption First Edition
ISO
9073-7
Textiles - Test Methods for Nonwovens - Part 7: Determination of Bending Length First Edition
ISO
9073-8
Textiles - Test Methods for Nonwovens - Part 8: Determination of Liquid Strike-Through Time (Simulated Urine) First Edition
ISO
9073-9
Textiles - Test Methods for Nonwovens - Part 9: Determination of Drape Coefficient First Edition
ISO
9073-10
Textiles Test methods for nonwovens Part 10: Lint and other particles generation in the dry state First Edition
ISO
9073-11
Textiles Test methods for nonwovens Part 11: Run-off First Edition
ISO
9073-12
Textiles Test methods for nonwovens Part 12: Demand absorbency First Edition
ISO
9073-13
Textiles Test methods for nonwovens Part 13: Repeated liquid strike-through time First Edition
ISO
9073-14
Textiles Test methods for nonwovens Part 14: Coverstock wetback First Edition
ISO
9073-15
Textiles ù Test methods for nonwovens ù Part 15: Determination of air permeability First Edition
Textiles ù Test methods for nonwovens ù Part 18: Determination of breaking strength and elongation of nonwoven materials using
ISO
9073-18
the grab tensile test First Edition
ISO
9075-1 CORR 2
Information technology ù Database languages ù SQL ù Part 1: Framework (SQL/Framework) TECHNICAL CORRIGENDUM 2
Information technology ù Database languages ù SQL ù Part 1: Framework (SQL/Framework) TECHNICAL CORRIGENDUM 1
ISO
9075-1 CORR 1
Second Edition
ISO
9075-1
Information technology ù Database languages ù SQL ù Part 1: Framework (SQL/Framework) Second Edition
ISO
9075-2 CORR 2
Information technology ù Database languages ù SQL ù Part 2: Foundation (SQL/Foundation) TECHNICAL CORRIGENDUM 2
Information technology ù Database languages ù SQL ù Part 2: Foundation (SQL/Foundation) TECHNICAL CORRIGENDUM 1
ISO
9075-2 CORR 1
Second Edition
ISO
9075-2
Information technology ù Database languages ù SQL ù Part 2: Foundation (SQL/Foundation) Second Edition
Information technology ù Database languages ù SQL ù Part 3: Call-Level Interface (SQL/CLI) TECHNICAL CORRIGENDUM 1 Third
ISO
9075-3 CORR 1
Edition
ISO
9075-3
Information technology ù Database languages ù SQL ù Part 3: Call-Level Interface (SQL/CLI) Third Edition
Information technology ù Database languages ù SQL ù Part 4: Persistent Stored Modules (SQL/PSM) TECHNICAL CORRIGENDUM
ISO
9075-4 CORR 2
2
Information technology - Database languages - SQL - Part 4: Persistent Stored Modules (SQUPSM) TECHNICAL CORRIGENDUM 1
ISO
9075-4 CORR 1
Third Edition
ISO
9075-4
Information technology - Database languages - SQL - Part 4: Persistent Stored Modules (SQUPSM) Third Edition
Information Technology - Database Languages - SQL - Part 5: Host Language Bindings (SQL/Bindings) First Edition; Corrigendum 1
ISO
9075-5
12/15/2000; Amendment 1: 03/15/2001; Corrigendum 1 to Amendment 1: 06/01/2003; Corrigendum 2: 6/01/2003
Information technology ù Database languages ù SQL ù Part 9: Management of External Data (SQL/MED) TECHNICAL
ISO
9075-9 CORR 1
CORRIGENDUM 1 Second Edition
ISO
9075-9
Information technology ù Database languages ù SQL ù Part 9: Management of External Data (SQL/MED) Second Edition
Information technology ù Database languages ù SQL ù Part 10: Object Language Bindings (SQL/OLB) TECHNICAL
ISO
9075-10 CORR 2
CORRIGENDUM 2 Second Edition
Information technology ù Database languages ù SQL ù Part 10: Object Language Bindings (SQL/OLB) TECHNICAL
ISO
9075-10 CORR 1
CORRIGENDUM 1 Second Edition
ISO
9075-10
Information technology ù Database languages ù SQL ù Part 10: Object Language Bindings (SQL/OLB) Second Edition
Information technology ù Database languages ù SQL ù Part 11: Information and Definition Schemas (SQL/Schemata) TECHNICAL
ISO
9075-11 CORR 2
CORRIGENDUM 2 First Edition
Information technology ù Database languages ù SQL ù Part 11: Information and Definition Schemas (SQL/Schemata) TECHNICAL
ISO
9075-11 CORR 1
CORRIGENDUM 1 First Edition
ISO
9075-11
Information technology ù Database languages ù SQL ù Part 11: Information and Definition Schemas (SQL/Schemata) First Edition
Information technology ù Database languages ù SQL ù Part 13: SQL Routines and Types Using the JavaTM Programming Language
ISO
9075-13 CORR 1
(SQL/JRT) TECHNICAL CORRIGENDUM 1 Second Edition
Information technology ù Database languages ù SQL ù Part 13: SQL Routines and Types Using the JavaTM Programming Language
ISO
9075-13
(SQL/JRT) Second Edition
Information technology ù Database languages ù SQL ù Part 14: XML-Related Specifications (SQL/XML) TECHNICAL
ISO
9075-14 CORR 1
CORRIGENDUM 1 Second Edition
ISO
9075-14
Information technology Database languages SQL Part 14: XML-Related Specifications (SQL/XML) Second Edition
Plastics Piping and Ducting Systems - Determination of the Long-Term Hydrostatic Strength of Thermoplastics Materials in Pipe
ISO
9080
Form by Extrapolation First Edition; Replaces ISO TR 9080
ISO
9083
Calculation of Load Capacity of Spur and Helical Gears - Application to Marine Gears First Edition
Calculation of Load Capacity of Spur and Helical Gears - Application to High Speed Gears and Gears of Similar Requirements First
ISO
9084
Edition
ISO
9085
Calculation of Load Capacity of Spur and Helical Gears - Application for Industrial Gears First Edition
ISO
9086-1
Wood - Methods of Physical and Mechanical Testing - Vocabulary - Part 1: General Concepts and Macrostructure First Edition
ISO
9087
Wood - Determination of Nail and Screw Holding Power Under Axial Load Application First Edition
Carbonaceous Materials Used for the Production of Aluminium - Cathode Blocks and Prebacked Anodes - Determination of the
ISO
9088
Density in Xylene by a Pyknometric Method First Edition
ISO
9089
Marine Structures - Mobile Offshore Units - Anchor Winches First Edition
ISO
9090
Gas Tightness of Equipment for Gas Welding and Allied Processes First Edition
ISO
9091-1
Refrigerated Light- Hydrocarbon Fluids - Calibration of Spherical Tanks in Ships - Part 1: Stereo-Photogrammetry First Edition
ISO
9091-2
Refrigerated Light Hydrocarbon Fluids - Calibration of Spherical Tanks in Ships - Part 2: Triangulation Measurement First Edition
ISO
9092
Textiles - Nonwovens - Definition First Edition
ISO
9093-1
Small Craft - Seacocks and Through-Hull Fittings - Part 1: Metallic First Edition
ISO
9093-2
Small Craft - Seacocks and Through-Hull-Fittings - Part 2: Non-Metallic First Edition
ISO
9094-1
Small Craft - Fire Protection - Part 1: Craft with a Hull Length of up to and Including 15 m First Edition
ISO
9094-2
Small craft Fire protection Part 2: Craft with a hull length of over 15 m First Edition
ISO
9095
Steel Tubes - Continuous Character Marking and Colour Coding for Material Identification First Edition
Stationary source emissions ù Manual determination of mass concentration of particulate matter TECHNICAL CORRIGENDUM 1
ISO
9096 CORR 1
Second Edition
ISO
9096
Stationary Source Emissions - Manual Determination of Mass Concentration of Particulate Matter Second Edition
ISO
9097
Small Craft - Electric Fans First Edition; (EN ISO 9097:1994)
ISO
9098-1
Bunk Beds for Domestic Use - Safety Requirements and Tests - Part 1: Safety Requirements First Edition
ISO
9098-2
Bunk Beds for Domestic Use - Safety Requirements and Tests - Part 2: Test Methods First Edition
ISO
9099
Air-Conditioning and Ventilation of Dry Provision Rooms on Board Ships - Design Conditions and Basis of Calculations First Edition
ISO
9100-1
Glass containers Vacuum lug finishes Part 1: General First Edition; Replaces ISO 9100: 1992
ISO
9100-2
Glass Containers - Vacuum Lug Finishes - Part 2: 33 medium First Edition
ISO
9100-3
Glass Containers - Vacuum Lug Finishes - Part 3: 38 regular First Edition
ISO
9100-4
Glass Containers - Vacuum Lug Finishes - Part 4: 38 medium First Edition
ISO
9100-5
Glass containers Vacuum lug finishes Part 5: 43 and 48 regular First Edition; Replaces ISO 9100: 1992
ISO
9100-6
Glass containers Vacuum lug finishes Part 6: 53 and 58 regular First Edition; Replaces ISO 9100: 1992
ISO
9100-7
Glass containers Vacuum lug finishes Part 7: 58 deep First Edition; Replaces ISO 9100: 1992
ISO
9100-8
Glass containers Vacuum lug finishes Part 8: 63, 66 and 70 regular First Edition; Replaces ISO 9100; 1992
ISO
9100-9
Glass containers Vacuum lug finishes Part 9: 63, 66 and 70 deep First Edition; Replaces ISO 9100; 1992
ISO
9100-10
Glass containers Vacuum lug finishes Part 10: 77 regular First Edition; Replaces ISO 9100: 1992
ISO
9100-11
Glass containers Vacuum lug finishes Part 11: 82 regular First Edition; Replaces ISO 9100: 1992
ISO
9100-12
Glass containers Vacuum lug finishes Part 12: 89 regular First Edition; Replaces ISO 9100: 1992
ISO
9100-13
Glass containers Vacuum lug finishes Part 13: 100 regular First Edition; Replaces ISO 9100: 1992
ISO
9100-14
Glass containers Vacuum lug finishes Part 14: 110 regular First Edition; Replaces ISO 9100; 1992
ISO
9101
Surface Active Agents - Determination of Interfacial Tension - Drop Volume Method First Edition
ISO
9102
Diesel Engines - Screw-in Injection Nozzle Holders, Types 24, 25, 26 and 26.1 Second Edition
ISO
9103
Road Vehicles - Compression-Ignition Engines - Screw-in Injection Nozzle Holder, Type 23 First Edition
Measurement of Fluid Flow in Closed Conduits - Methods of Evaluating the Performance of Electromagnetic Flow- Meters for Liquids
ISO
9104
First Edition (CEN EN 29104: 1993)
ISO
9110-1
Hydraulic Fluid Power - Measurement Techniques - Part 1: General Measurement Principles First Edition
Hydraulic Fluid Power - Measurement Techniques - Part 2: Measurement of Average Steady-State Pressure in a Closed Conduit First
ISO
9110-2
Edition
ISO
9112
Truck and Bus Tyres - Method of Measuring Tyre Rolling Circumference - Loaded New Tyres First Edition
ISO
9113
Plastics - Polypropylene (PP) and Propylene-Copolymer Thermoplastics - Determination of Isotactic Index First Edition
ISO
9114
Crude Petroleum - Determination of Water Content by Hydride Reaction - Field Method First Edition
ISO
9116
Green Coffee - Guidelines on Methods of Specification Second Edition
Paints and Varnishes - Determination of Through-Dry State and Through-Dry Time - Method of Test First Edition; (CEN EN
ISO
9117
29117:1992)
ISO
9119
Cross-Country Skis - Binding Mounting Area - Requirements and Test Methods First Edition;
Petroleum and Related Products - Determination of Air-Release Properties of Steam Turbine and Other Oils - Impinger Method First
ISO
9120
Edition; Corrected and Reprinted 05/15/1998
ISO
9123
Measurement of Liquid Flow in Open Channels - Stage-Fall-Discharge Relationships First Edition
ISO
9125
Fibre-cement slates and fittings First Edition; Corrigendum 1: 1993; Amendment 1: 8/15/2004; Corrigendum 2: 05/2005
ISO
9126-1
Software Engineering - Product Quality - Part 1: Quality Model First Edition; Cancels and Replaces ISO/IEC 9126:1991
ISO
9127
Information Processing Systems - User Documentation and Cover Information for Consumer Software Packages First Edition
ISO
9128
Road Vehicles - Graphical Symbols to Designate Brake Fluid Types Second Edition
ISO
9129
Motorcycles - Measurement Methods for Moments of Inertia First Edition
ISO
9130
Motorcycles Measurement method for location of centre of gravity Second Edition
ISO
9131
Three Wheeled Mopeds and Motorcycles - Dimensions - Vocabulary First Edition
ISO
9132
Three-Wheeled Mopeds and Motorcycles - Masses - Vocabulary First Edition
ISO
9136-1
Abrasive grains Determination of bulk density Part 1: Macrogrits First Edition; Replaces ISO 9136:1989
ISO
9136-2
Abrasive Grains - Determination of Bulk Density - Part 2: Microgrits First Edition
ISO
9137
Abrasive Grains - Determination of Capillarity First Edition
ISO
9138
Abrasive Grains - Sampling and Splitting First Edition
ISO
9139
Aerospace - Nuts, Plain or Slotted (Castellated) - Procurement Specification First Edition
ISO
9140
Aerospace - Nuts, Plain or Slotted (Castellated) - Test Methods First Edition
ISO
9141
Road Vehicles - Diagnostic Systems - Requirements for Interchange of Digital Information First Edition
Road Vehicles - Diagnostic Systems - Part 2: CARB Requirements for Interchange of Digital Information First Edition 1994;
ISO
9141-2
Amendment 1: 12-01-1996
ISO
9141-3
Road Vehicles - Diagnostic Systems - Part 3: Verification of the Communication Between Vehicle and OBD II Scan Tool First Edition
ISO
9142
Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints Second Edition
ISO
9144
Securities - Optical Character Recognition Line - Position and Structure First Edition
ISO
9147
Pig-Irons - Definition and Classification First Edition
ISO
9148
Composition Cork in Rolls for Decoration - Test Methods First Edition
ISO
9149
Composition Cork in Rolls for Decoration - Specifications First Edition
ISO
9150
Protective Clothing - Determination of Behaviour of Materials on Impact of Small Splashes of Molten Metal First Edition
ISO
9151
Protective Clothing Against Heat and Flame - Determination of Heat Transmission on Exposure to Flame First Edition
ISO
9152
Aerospace - Bolts, with MJ Threads, in Titanium Alloys, Strength Class 1 100 MPa - Procurement Specification First Edition
Aerospace - Bolts, with MJ Threads, Made of Heat-Resistant Nickel-Based Alloy, Strength Class 1 550 MPa - Procurement
ISO
9154
Specification First Edition
Aerospace - Nuts, Anchor, Self-Locking, Fixed, 90 Degree Corner, Reduced Series, with Counterbore, with MJ Threads,
Classifications: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius, 1 100 MPa (at Ambient Temperature)/315 Degrees
ISO
9156
Celsius and 1 100 MPa (at Ambient Temperature)/425 Degrees Celsius - Dimensions Second Edition
Aerospace - Nuts, Spline-Drive, Self-Locking, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature)/425 Degrees C,
1 100 MPa (at Ambient Temperature)/650 Degrees C, 1 210 MPa (at Ambient Temperature)/425 Degrees C, 1 210 MPa (at Ambient
Temperature)/730 Degrees C, 1 550 MPa (at Ambient Temperature)/235 Degrees C, 1 550 MPa (at Ambient Temperature)/425
ISO
9157
Degrees Second Edition
ISO
9158
Road Vehicles - Nozzle Spouts for Unleaded Gasoline First Edition
ISO
9159
Road Vehicles - Nozzle Spouts for Leaded Gasoline and Diesel Fuel First Edition
ISO
9160
Information Processing - Data Encipherment - Physical Layer Interoperability Requirements First Edition
ISO
9161
Uranium dioxide powder Determination of apparent density and tap density First Edition
ISO
9162
Petroleum Products - Fuels (Class F) - Liquefied Petroleum Gases - Specifications First Edition
Textile Glass - Rovings - Manufacture of Test Specimens and Determination of Tensile Strength of Impregnated Rovings Second
ISO
9163
edition
Rapeseed - Determination of Glucosinolates Content - Part 1: Method Using High-Performance Liquid Chromatography First Edition
ISO
9167-1
(CEN EN ISO 9167-1: 1995)
ISO
9167-2
Rapeseed - Determination of Glucosinolates Content - Part 2: Method Using X-ray Fluorescence Spectrometry First Edition
Dental Handpieces - Hose Connectors Second Edition; (Incorporating Draft Addendum 1-1989); (CEN EN 29168: 1994) (CAN/CSA-
ISO
9168
Z349.58-94)
Air quality Definition and determination of performance characteristics of an automatic measuring system Second Edition;:1995
ISO
9169
[Superseded: ISO 6879]
Terminal Units for Medical Gas Pipeline Systems - Part 1: Terminal Units for Use with Compressed Medical Gases and Vacuum First
ISO
9170-1
Edition
Terminal Units for Use in Medical Gas Pipeline Systems - Part 2: Terminal Units for Anaesthetic Gas Scavenging Systems First
ISO
9170-2
Edition
Information Technology - 130 mm Optical Disk Cartridge, Write Once, for Information Interchange - Part 1: Unrecorded Optical Disk
ISO
9171-1
Cartridge First Edition; CEN EN 29171-1: 1993
Information Technology - 130 mm Optical Disk Cartridge, Write Once, for Information Interchange - Part 2: Recording Format First
ISO
9171-2
Edition; CEN EN 29171-2: 1993
ISO
9173-1
Dentistry Extraction forceps Part 1: General requirements and test methods Second Edition
ISO
9174
Water Quality - Determination of Total Chromium - Atomic Absorption Spectrometric Methods Second Edition
Tubular Tips for Hand- Held Technical Pens Using India Ink on Tracing Paper - Part 1: Definitions, Dimensions, Designation and
ISO
9175-1
Marking First Edition
ISO
9177-1
Mechanical Pencils - Part 1: Classification, Dimensions, Performance Requirements and Testing First Edition
ISO
9177-2
Mechanical Pencils - Part 2: Black Leads - Classification and Dimensions First Edition
ISO
9177-3
Mechanical Pencils - Part 3: Black Leads - Bending Strengths of HB Leads First Edition
ISO
9180
Black Leads for Wood-Cased Pencils - Classification and Diameters First Edition
ISO
9181
Tools for Pressing - Round Punches with 60 Degree Conical Head and Reduced Shank Second Edition
ISO
9182-1
Tools for Pressing - Guide Pillars - Part 1: Types First Edition
ISO
9182-2
Tools for Pressing - Guide Pillars - Part 2: Type A, Straight Pillars First Edition
ISO
9182-3
Tools for Pressing - Guide Pillars - Part 3: Type B, End-Locking Pillars First Edition
ISO
9182-4
Tools for Pressing - Guide Pillars - Part 4: Type C, Pillars with Taper Lead and Bush First Edition
ISO
9182-5
Tools for Pressing - Guide Pillars - Part 5: Type D, End-Locking Pillars with Flange First Edition
ISO
9183-1
Tools for Pressing - Wear Plates for Press Dies - Part 1: Type A First Edition
ISO
9183-2
Tools for Pressing - Wear Plates for Press Dies - Part 2: Type B First Edition
ISO
9184-1
Paper, Board and Pulps - Fibre Furnish Analysis - Part 1: General Method First Edition
ISO
9184-2
Paper, Board and Pulps - Fibre Furnish Analysis - Part 2: Staining Guide First Edition
ISO
9184-3
Paper, Board and Pulps - Fibre Furnish Analysis - Part 3: Herzberg Staining Test First Edition
ISO
9184-4
Paper, Board and Pulps - Fibre Furnish Analysis - Part 4: GraffC" Staining Test First Edition"
ISO
9184-5
Paper, Board and Pulps - Fibre Furnish Analysis - Part 5: Lofton-Merritt Staining Test (Modification of Wisbar) First Edition
ISO
9184-6
Paper, Board and Pulps - Fibre Furnish Analysis - Part 6: Determination of Fibre Coarseness First Edition
ISO
9184-7
Paper, Board and Pulp - Fibre Furnish Analysis - Part 7: Determination of Weight Factor First Edition
ISO
9185
Protective clothing ù Assessment of resistance of materials to molten metal splash Second Edition
ISO
9186-1
Graphical symbols ù Test methods ù Part 1: Methods for testing comprehensibility First Edition [Superseded: ISO 9186, ISO 9186]
ISO
9187-1
Injection equipment for medical use Part 1: Ampoules for injectables Third Edition
ISO
9187-2
Injection Equipment for Medical Use - Part 2: One-Point-Cut (OPC) Ampoules First Edition
Machine Tools - Straight-Sided Single-Action Mechanical Power Presses from 400 kN up to and Including 4 000 kN Nominal Force -
ISO
9188
Characteristics and Dimensions First Edition
Machine Tools - Straight-Sided High-Speed Mechanical Power Presses from 250 kN up to and Including 4 000 kN Nominal Force -
ISO
9189
Characteristics and Dimensions First Edition
ISO
9190
Lawn and Garden Ride-on (Riding) Tractors - Drawbar First Edition [Replaced: ASABE S298.1]
ISO
9191
Lawn and Garden Ride-on (Riding) Tractors - Three-Point Hitch First Edition
ISO
9192
Lawn and Garden Ride-on (Riding) Tractors - One- Point Tubular Sleeve Hitch First Edition
ISO
9193
Lawn and Garden Ride-on (Riding) Tractors - Power Take-off First Edition
Bases for Design of Structures - Actions Due to the Self-Weight of Structures, Non- Structural Elements and Stored Materials -
ISO
9194
Density First Edition (PNS 1095:1992)
ISO
9195
Liquid Flow Measurement in Open Channels - Sampling and Analysis of Gravel-Bed Material First Edition
ISO
9196
Liquid Flow Measurement in Open Channels - Flow Measurements Under Ice Conditions First Edition
ISO
9197
Paper, board and pulps Determination of water-soluble chlorides Second Edition
ISO
9198
Paper, Board and Pulp - Determination of Water-Soluble Sulfates Second Edition
Aerospace - Nuts, Bihexagonal, Self-Locking, MJ Threads, Classifications 1 100 MPa (at Ambient Temp.)/425 Degrees C, 1 100 MPa
(at Ambient Temp.)/650 Degrees C, 1 210 MPa (at Ambient Temp.)/425 Degrees C, 1 210 MPa (at Ambient Temp.)/730 Degrees C,
1 550 Mpa (at Ambient Temp.)/235 Degrees C, 1 550 MPa (at Ambient Temp.)/425 Degrees C and 1 550 MPa (at Ambient
ISO
9199
Temp.)/600 Degrees C, - Dimensions Second Edition
ISO
9200
Crude Petroleum and Liquid Petroleum Products - Volumetric Metering of Viscous Hydrocarbons First Edition
ISO
9202
Jewelry - Fineness of Precious Metal Alloys First Edition; (CEN EN 29202:1992)
ISO
9203-1
Shipbuilding - Topology of Ship Hull Structure Elements - Part 1: Location of Elements First Edition
ISO
9203-2
Shipbuilding - Topology of Ship Hull Structure Elements - Part 2: Description of Elements First Edition
ISO
9203-3
Shipbuilding - Topology of Ship Hull Structure Elements - Part 3: Relations of Elements First Edition
ISO
9205
Refractory Bricks for Use in Rotary Kilns - Hot-Face Identification Marking First Edition
ISO
9206
Aerospace - Constant Displacement Hydraulic Motors - General Specifications First Edition
ISO
9208
Aluminium Ores - Determination of Vanadium Content - BPHA Spectrophotometric Method First Edition
ISO
9211-1
Optics and Optical Instruments - Optical Coatings - Part 1: Definitions First Edition
ISO
9211-2
Optics and Optical Instruments - Optical Coatings - Part 2: Optical Properties First Edition
ISO
9211-3
Optics and Optical Instruments - Optical Coatings - Part 3: Environmental Durability First Edition
ISO
9211-4
Optics and optical instruments Optical coatings Part 4: Specific test methods Second Edition
ISO
9213
Measurement of total discharge in open channels Electromagnetic method using a full-channel-width coil Second Edition
Aerospace - Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and
ISO
9216
passivated - Dimensions and masses First Edition
Aerospace - Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and
ISO
9217
passivated - Dimensions and masses First Edition
Aerospace - Washers, flat, for pulleys, in alloy steel cadmium plated or in corrosion-resistant steel and passivated - Dimensions and
ISO
9218
masses First Edition
Aerospace - Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in
ISO
9219
titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated - Dimensions and masses First Edition
Metallic Coatings - Measurement of Coating Thickness - Scanning Electron Microscope Method First Edition (CEN EN ISO 9220:
ISO
9220
1994)
ISO
9221-1
Furniture - Children s High Chairs - Part 1: Safety Requirements First Edition (CEN ENV 1178-1:1994)
ISO
9221-2
Furniture - Children s High Chairs - Part 2: Test Methods First Edition (CEN ENV 1178-2:1994)
Technical Drawings - Seals for Dynamic Application - Part 1: General Simplified Representation First Edition; (Corrected and
ISO
9222-1
Reprinted -1989) (CEN EN ISO 9222-1:1995)
Technical Drawings - Seals for Dynamic Application - Part 2: Detailed Simplified Representation First Edition; (CEN EN ISO 9222-
ISO
9222-2
2:1994)
ISO
9223
Corrosion of Metals and Alloys - Corrosivity of Atmospheres - Classification First Edition
ISO
9224
Corrosion of Metals and Alloys - Corrosivity of Atmospheres - Guiding Values for the Corrosivity Categories First Edition
ISO
9225
Corrosion of Metals and Alloys - Corrosivity of Atmospheres - Measurement of Pollution First Edition
Corrosion of Metals and Alloys - Corrosivity of Atmospheres - Determination of Corrosion Rate of Standard Specimens for the
ISO
9226
Evaluation of Corrosivity First Edition
ISO
9227
Corrosion Tests in Artificial Atmospheres - Salt Spray Tests Second Edition; Replaces ISO 7253:1996
ISO
9229
Wõrmedõmmung ù Begriffsbestimmungen Thermal insulation ù Vocabulary Isolation thermique ù Vocabulaire Second Edition
ISO
9230
Information and documentation ù Determination of price indexes for print and electronic media purchased by libraries Second edition
Yogurt - Identification of Characteristic Microorganisms (Lactobacillus Delbrueckii Subsp. Bulgaricus and Streptococcus
ISO
9232
Thermophilus) First Edition
Cheese and Cheese Rind - Determination of Natamycin Content - Method by Molecular Absorption Spectrometry and by High-
ISO
9233
Performance Liquid Chromatography First Edition
ISO
9235
Aromatic Natural Raw Materials - Vocabulary First Edition
Photography Sensitometry of screen/film systems for medical radiography Part 1: Determination of sensitometric curve shape,
ISO
9236-1
speed and average gradient Second Edition
Photography - Sensitometry of Screen/Film Systems for Medical Radiography - Part 3: Determination of Sensitometric Curve Shape,
ISO
9236-3
Speed and Average Gradient for Mammography First Edition
ISO
9237
Textiles - Determination of the Permeability of Fabrics to Air First Edition (CEN EN ISO 9237: 1995)
ISO
9239-1
Reaction to Fire Tests for Floorings - Part 1: Determination of the Burning Behaviour Using a Radiant Heat Source Second Edition
ISO
9239-2
Reaction to fire tests for floorings - Part 2: Determination of flame spread at a heat flux level of 25 kW/m2 First Edition
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 1: General Introduction Second Edition;
ISO
9241-1
Amendment 1-03/01/2001
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 2: Guidance on Task Requirements First
ISO
9241-2
Edition
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 3: Visual Display Requirements First Edition;
ISO
9241-3
Amendment 1:12/15/2000
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 4: Keyboard Requirements First Edition;
ISO
9241-4
Technical Corrigendum 1, 11/01/2000 [: ISO 9241-400]
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 5: Workstation Layout and Postural
ISO
9241-5
Requirements First Edition
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 6: Guidance on the Work Enviroment First
ISO
9241-6
Edition
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 7: Requirements for Display with Reflections
ISO
9241-7
First Edition
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 8 Requirements for Displayed Colours First
ISO
9241-8
Edition
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 9: Requirements for Non-Keyboard Input
ISO
9241-9
Device First Edition [: ISO 9241-400]
ISO
9241-11
Ergonomic Requirements For Office Work with Visual Display Terminals (VDTs) - Part 11: Guidance on Usability First Edition
ISO
9241-12
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 12: Presentation of Information First Edition
ISO
9241-13
Ergonomic Requirements For Office Work with Visual Display Terminals (VDTs) - Part 13: User Guidance First Edition
ISO
9241-14
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 14: Menu Dialogues First Edition
ISO
9241-15
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 15: Command Dialogues First Edition
ISO
9241-16
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 16: Direct Manipulation Dialogues First Edition
ISO
9241-17
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 17: Form Filling Dialogues First Edition
ISO
9241-110
Ergonomics of human-system interaction Part 110: Dialogue principles First Edition;:1996 [Replaced: ISO 9241-10]
Ergonomics of human-system interaction ù Part 400: Principles and requirements for physical input devices First Edition [: ISO 9241-
ISO
9241-400
4, ISO 9241-9]
ISO
9242
Pliers and Nippers - Construction Worker s Pincers - Dimensions and Test Values First Edition (AS/NZS 4056.10: 1992)
ISO
9243
Pliers and Nippers - Carpenter s Pincers - Dimensions and Test Values First Edition
ISO
9244
Earth-Moving Machinery - Safety Signs and Hazard Pictorials - General Principles First Edition
ISO
9245
Earth-Moving Machinery - Machine Productivity - Vocabulary, Symbols and Units First Edition
ISO
9246
Earth-Moving Machinery - Crawler and Wheel Tractor Dozer Blades - Volumetric Ratings First Edition
Earth-Moving Machinery - Electrical Wires and Cables - Principles of Identification and Marking First Edition; Amendment 1:
ISO
9247
12/15/1998
ISO
9248
Earth-Moving Machinery - Units for Dimensions, Performance and Capacities, and Their Measurement Accuracies First Edition
ISO
9249
Earth-Moving Machinery - Engine Test Code - Net Power Second Editon; Technical Corrigendum 1: 03-01-1999
ISO
9251
Thermal Insulation - Heat Transfer Conditions and Properties of Materials - Vocabulary First Edition (CEN EN ISO 9251: 1995)
ISO
9252
Synthetic Rubber Latex - Microbiological Examination First Edition
Aerospace - Bolts, Normal Spine Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated or
ISO
9254
Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition
Aerospace - Bolts, Normal Spline Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated,
ISO
9255
Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition
Aerospace - Bolts, Large Hexagonal Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated or
ISO
9256
Uncoated, Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition
ISO
9258
Passenger Cars - Wiper Systems - Wiper Blade Length First Edition
ISO
9259
Passenger Cars - Windscreen Wiper Systems - Wiper Arm-to-Blade Connections First Edition; Amendment 1 - 07-15-2001
ISO
9261
Agricultural irrigation equipment Emitters and emitting pipe Specification and test methods Second Edition
ISO
9264
Woodworking Machines - Narrow Belt Sanding Machines with Sliding Table or Frame - Nomenclature First Edition
ISO
9265
Woodworking Machines - Multi-Spindle Boring Machines - Nomenclature First Edition
ISO
9266
Woodworking Machines - Universal Tool and Cutter Sharpeners - Nomenclature First Edition
ISO
9267
Woodworking Machines - Bandsaw Blade Sharpening Machines - Nomenclature First Edition
ISO
9268
Implants for Surgery - Metal Bone Screws with Conical Under-Surface of Head - Dimensions First Edition;
ISO
9269
Implants for Surgery - Metal Bone Plates - Holes and Slots Corresponding to Screws with Conical Under-Surface First Edition;
ISO
9270
7/24 Tapers for Tool Shanks for Automatic Changing - Tapers for Spindle Noses First Edition
ISO
9271
Decontamination of Radioactively Contaminated Surfaces - Testing of Decontamination Agents for Textiles First Edition
ISO
9276-1
Representation of Results of Particle Size Analysis - Part 1: Graphical Representation Second Edition; Corrigendum 1: 2-1-2004
Representation of Results of Particle Size Analysis - Part 2: Calculation of Avarage Particle Sizes/Diameters and Moments from
ISO
9276-2
Particle Size Distributions First Edition
ISO
9276-4
Representation of Results of Particle Size Analysis - Part 4: Characterization of a Classification Process First Edition
Representation of results of particle size analysis - Part 5: Methods of calculation relating to particle size analyses using logarithmic
ISO
9276-5
normal probability distribution First Edition
ISO
9277
Determination of the Specific Surface Area of Solids by Gas Adsorption Using the BET Method First Edition
Uranium Dioxide Pellets - Determination of Density and Amount of Open and Closed Porosity - Boiling Water Method and Penetration
ISO
9278
Immersion Method First Edition
ISO
9279
Uranium Dioxide Pellets - Determination of Density and Total Porosity - Mercury Displacement Method First Edition
ISO
9281-1
Information Technology - Picture Coding Methods - Part 1: Identification First Edition; NZS/ISO/IEC 9281.1: 1990
ISO
9281-2
Information Technology - Picture Coding Methods - Part 2: Procedure for Registration First Edition
Information Processing - Coded Representation of Pictures - Part 1: Encoding Principles for Picture Representation in a 7-Bit or 8-Bit
ISO
9282-1
Environment First Edition
ISO
9283
Manipulating Industrial Robots - Performance Criteria and Related Test Methods Second Edition
ISO
9284
Abrasive Grains - Test- Sieving Machines First Edition
ISO
9285
Abrasive Grains and Crude - Chemical Analysis of Fused Aluminium Oxide First Edition
ISO
9286
Abrasive Grains and Crude - Chemical Analysis of Silicon Carbide First Edition
ISO
9288
Thermal Insulation - Heat Transfer by Radiation - Physical Quantities and Definitions First Edition (CEN EN ISO 9288: 1996)
ISO
9289
Oilseed Residues - Determination of Free Residual Hexane First Edition (CEN EN ISO 9289: 1995)
ISO
9292
Manganese Ores and Concentrates - Determination of Total Iron Content - 1,10- Phenanthroline Spectrometric Method First Edition
ISO
9293
Information Technology - Volume and File Structure of Disk Cartridges for Information Interchange Second Edition
Acoustics - Measurement of High-Frequency Noise Emitted by Computer and Business Equipment First Edition; Corrected and
ISO
9295
Reprinted- 1989
ISO
9296
Acoustics - Declared Noise Emission Values of Computer and Business Equipment First Edition
ISO
9297
Water Quality - Determination of Chloride - Silver Nitrate Titration with Chromate Indicator (Mohr s Method) First Edition
ISO
9298
Rubber Compounding Ingredients - Zinc Oxide - Test Methods First Edition
ISO
9300
Measurement of gas flow by means of critical flow Venturi nozzles Second Edition
ISO
9301
Oil of cumin seed (Cuminum cyminum L.) First Edition
Seamless and Welded (Except Submerged Arc- Welded) Steel Tubes for Pressure Purposes - Electromagnetic Testing for
ISO
9302
Verification of Hydraulic Leak-Tightness Second Edition
Seamless and Welded (Except Submerged Arc- Welded) Steel Tubes for Pressure Purposes - Full Peripheral Ultrasonic Testing for
ISO
9303
the Detection of Longitudinal Imperfections First Edition
Seamless and Welded (Except Submerged Arc- Welded) Steel Tubes for Pressure Purposes - Eddy Current Testing for the
ISO
9304
Detection of Imperfections First Edition
Seamless Steel Tubes for Pressure Purposes - Full Peripheral Ultrasonic Testing for the Detection of Transverse Imperfections First
ISO
9305
Edition
Water quality ù Detection and enumeration of Escherichia coli and coliform bacteria ù Part 1: Membrane filtration method
ISO
9308-1 CORR 1
TECHNICAL CORRIGENDUM 1 Second Edition
Water Quality - Detection and Enumeration of Escherichia Coli and Coliform Bacteria - Part 1: Membrane Filtration Method Second
ISO
9308-1
Edition
Water Quality - Detection and Enumeration of Coliform Organisms, Thermotolerant Coliform Organisms and Presumptive
ISO
9308-2
Escherichia Coli - Part 2: Multiple Tube (Most Probable Number) Method First Edition
Water Quality - Detection and Enumeration of Escherichia Coli and Coliform Bacteria in Surface and Waste Water - Part 3:
ISO
9308-3
Miniaturized Method (Most Probable Number) by Inoculation in a Liquid Medium First Edition; Corrigendum 1: 2000
ISO
9309
Refrigerant Compressors - Presentation of Performance Data First Edition (NZS/ISO 9309: 1989)
ISO
9311-1
Adhesives for thermoplastic piping systems Part 1: Determination of film properties First Edition
ISO
9311-2
Adhesives for Thermoplastic Piping Systems - Part 2: Determination of Shear Strength First Edition
ISO
9311-3
Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure First Edition
ISO
9312
Resistance Welding Equipment - Insulated Pins for Use in Electrode Back-ups First Edition; (EN ISO 9312 : 1994)
ISO
9313
Resistance Spot Welding Equipment - Cooling Tubes First Edition
Information Processing Systems - Fibre Distributed Data Interface (FDDI) - Part 1: Token Ring Physical Layer Protocol (PHY) First
ISO
9314-1
Edition
Information Processing Systems - Fibre Distributed Data Interface (FDDI) - Part 2: Token Ring Media Access Control (MAC) First
ISO
9314-2
Edition
Information Processing Systems - Fibre Distributed Data Interface (FDDI) - Part 3: Physical Layer Medium Dependent (PMD) First
ISO
9314-3
Edition; NZS/ISO/IEC 9314.3: 1990; CEN EN ISO/IEC 9314-3: 1995
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 4: Single-Mode Fiber Physical Layer Medium Dependent
ISO
9314-4
(SMF-PMD) First Edition
ISO
9314-5
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 5: Hybrid Ring Control (HRC) First Edition
ISO
9314-6
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 6: Station Management (SMT) First Edition
ISO
9314-7
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 7: Physical Layer Protocol (PHY-2) First Edition
ISO
9314-8
Information Technology - Fibre Distributed Data Interface (FDDI)- Part 8: Media Access Control-2 (MAC-2) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 9: Low-Cost Fibre Physical Layer Medium Dependent (LCF-
ISO
9314-9
PMD) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 13: Conformance Test Protocol Implementation Conformance
ISO
9314-13
Statement Proforma (CT-PICS) Proforma First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 20: Abstract Test Suite for FDDI Physical Medium Dependent
ISO
9314-20
Conformance Testing (PMD ATS) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 21: Abstract Test Suite for FDDI Physical Layer Protocol
ISO
9314-21
Conformance Testing (PHY ATS) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 25: Abstract Test Suite for FDDI - Station Management
ISO
9314-25
Conformance Testing (SMT-ATS) First Edition
Information Technology - Fibre Distributed Data Interface (FDDI) - Part 26: Media Access Control Conformance Testing (MAC-ATS)
ISO
9314-26
First Edition
ISO
9315
Information Processing Systems - Interface Between Flexible Disk Cartridge Drives and Their Host Controllers First Edition
ISO
9316
Information Technology - Small Computer System Interface-2 Second Edition
Information Technology - Small Computer System Interface-2 (SCSI-2) - Part 2: Common Access Method (CAM) Transport and SCSI
ISO
9316-2
Interface Module First Edition
ISO
9318-2
Information Technology - Intelligent Peripheral Interface Part 2: Device Specific Command Set for Magnetic Disk Drives First Edition
Information Technology - Intelligent Peripheral Interface Part 3: Device Generic Command Set for Magnetic and Optical Disk Drives
ISO
9318-3
First Edition
Information Technology - Intelligent Peripheral Interface Part 4: Device Generic Command Set for Magnetic Tape Drives (IPI-3 Tape)
ISO
9318-4
Second Edition
Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 1: General Requirements
ISO
9327-1
First Edition; Replaces ISO 2604-1: 1975
Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 2: Non-Alloy and Alloy (Mo,
ISO
9327-2
Cr and CrMo) Steels with Specified Elevated Temperature Properties First Edition
Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 3: Nickel Steels with
ISO
9327-3
Specified Low Temperature Properties First Edition
Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 4: Weldable Fine Grain
ISO
9327-4
Steels with High Proof Strength First Edition
Steel Forgings and Rolled or Forged Bars for Pressure Purposes - Technical Delivery Conditions - Part 5: Stainless Steels First
ISO
9327-5
Edition
ISO
9328-1
Steel Flat Products for Pressure Purposes - Technical Delivery Conditions - Part 1: General Requirements Second Edition
Steel flat products for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steels with specified elevated
ISO
9328-2
temperature properties Second Edition
Steel flat products for pressure purposes Technical delivery conditions Part 3: Weldable fine grain steels, normalized Second
ISO
9328-3
Edition; Together with ISO 9328-6, cancels and replaces ISO 9328-4:1991
Steel flat products for pressure purposes Technical delivery conditions Part 4: Nickel-alloy steels with specified low temperature
ISO
9328-4
properties Second Edition
Steel flat products for pressure purposes Technical delivery conditions Part 5: Weldable fine grain steels, thermomechanically rolled
ISO
9328-5
Second Edition
Steel flat products for pressure purposes Technical delivery conditions Part 6: Weldable fine grain steels, quenched and tempered
ISO
9328-6
First Edition
ISO
9328-7
Steel flat products for pressure purposes Technical delivery conditions Part 7: Stainless steels First Edition
Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 1: Unalloyed Steels with Specified Room
ISO
9329-1
Temperature Properties First Edition; Supersedes 2604-2
Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 3: Unalloyed and Alloyed Steels with Specified
ISO
9329-3
Low Temperature Properties First Edition; Replaces 2604-2 Along with 9329-2,1 and 4
Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 4: Austenitic Stainless Steels First Edition;
ISO
9329-4
Replaces 2604-2 Along with 9329-2,3 and 1
Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 1: Unalloyed Steel Tubes with Specified Room
ISO
9330-1
Temperature Properties First Edition; (Corrected and Reprinted -1990)
Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 2: Electric Resistance and Induction Welded
ISO
9330-2
Unalloyed and Alloyed Steel Tubes with Specified Elevated Temperature Properties First Edition
Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 3: Electric Resistance and Induction Welded
ISO
9330-3
Unalloyed and Alloyed Steel Tubes with Specified Low Temperature Properties First Edition
Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 4: Submerged Arc-Welded Unalloyed and Alloyed
ISO
9330-4
Steel Tubes with Specified Elevated Temperature Properties First Edition
Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 5: Submerged Arc-Welded Unalloyed and Alloyed
ISO
9330-5
Steel Tubes with Specified Low Temperature Properties First Edition
Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 6: Longitudinally Welded Austenitic Stainless Steel
ISO
9330-6
Tubes First Edition
ISO
9333
Dentistry Brazing materials Second Edition
Optics and photonics ù Optical transfer function ù Definitions and mathematical relationships Optique et photonique ù Fonction de
ISO
9334
transfert optique ù DÚfinitions et relations mathÚmatiques Second Edition; Trilingual
Optics and optical instruments - Optical transfer function - Principles and procedures of measurement First Edition; Corrigendum:
ISO
9335
11/15/2005
Optics and Optical Instruments - Optical Transfer Function - Application Part 1: Interchangeable Lenses for 35mm Still Cameras First
ISO
9336-1
Edition
ISO
9336-2
Optics and Optical Instruments - Optical Transfer Function - Application Part 2: Lenses for Office Copiers First Edition
ISO
9336-3
Optics and Optical Instruments - Optical Transfer Function - Application Part 3: Telescopes First Edition
Optics and optical instruments Test lenses for calibration of focimeters Part 1: Test lenses for focimeters used for measuring
ISO
9342-1
spectacle lenses First Edition; Replaces ISO 9342:1996
Optics and optical instruments Test lenses for calibration of focimeters Part 2: Test lenses for focimeters used for measuring contact
ISO
9342-2
lenses First Edition
ISO
9343
Pliers and nippers Slip joint pliers Dimensions and test values Second Edition
ISO
9344
Optics and Optical Instruments - Microscopes - Graticules for Eyepieces First Edition
Optics and Optical Instruments - Microscopes - Imaging Distances Related to Mechanical Reference Planes - Part 1: Tube Length
ISO
9345-1
160 mm First Edition
Optics and Optical Instruments - Microscopes: Imaging Distances Related to Mechanical Reference Planes - Part 2: Infinity-
ISO
9345-2
Corrected Optical Systems First Edition
Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary Performance
hygrothermique des bÔtiments et des matÚriaux pour le bÔtiment - Grandeurs physiques pour le transfert de masse - Vocabulaire
ISO
9346
Second Edition
ISO
9349
Preinsulated ductile iron pipeline systems Second Edition
ISO
9352
Plastics - Determination of Resistance to Wear by Abrasive Wheels Second Edition
ISO
9354
Textiles - Weaves - Coding System and Examples First Edition; Technical Corrigendum 1:10-15-2000
Ergonomic Requirements for the Design of Displays and Control Actuators - Part 1: Human Interactions with Displays and Control
ISO
9355-1
Actuators First Edition
ISO
9355-2
Ergonomic Requirements for the Design of Displays and Control Actuators - Part 2: Displays First Edition
ISO
9355-3
Ergonomic requirements for the design of displays and control actuators Part 3: Control actuators First Edition
ISO
9356
Polyolefin Pipe Assemblies with or Without Jointed Fittings - Resistance to Internal Pressure - Test Method First Edition
ISO
9357
Equipment for Crop Protection - Agricultural Sprayers - Tank Nominal Volume and Filling Hole Diameter First Edition
ISO
9358
Optics and Optical Instruments - Veiling Glare of Image-Forming Systems - Definitions and Methods of Measurement First Edition
ISO
9359
Air Quality - Stratified Sampling Method for Assessment of Ambient Air Quality First Edition
Anaesthetic and Respiratory Equipment - Heat and Moisture Exchangers (HMEs) for Humidifying Respired Gases in Humans - Part
ISO
9360-1
1: HMEs for Use with Minimum Tidal Volumes of 250 ml First Edition
Anaesthetic and Respiratory Equipment - Heat and Moisture Exchangers (HMEs) for Humidifying Respired Gases in Humans Part 2:
ISO
9360-2
HMEs for Use with Tracheostomized Patients Having Minimum Tidal Volumes of 250 ml First Edition
Indexable Inserts for Cutting Tools - Ceramic Inserts with Rounded Corners - Part 1: Dimensions of Inserts Without Fixing Hole First
ISO
9361-1
Edition
Indexable Inserts for Cutting Tools - Ceramic Inserts with Rounded Corners - Part 2: Dimensions of Inserts with Cylindrical Fixing
ISO
9361-2
Hole First Edition
ISO
9362
Banking - Banking Telecommunication Messages - Bank Identifier Codes Second Edition
ISO
9364
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities Third Edition
Agglomerated Cork Floor Tiles - Determination of Dimensions and Deviation from Squareness and from Straightness of Edges
ISO
9366
Second Edition
Lashing and Securing Arrangements on Road Vehicles for Sea Transportation on Ro/Ro Ships - General Requirements - Part 1:
ISO
9367-1
Commercial Vehicles and Combinations of Vehicles, Semi-Trailers Excluded First Edition (CEN EN 29367-1: 1993)
Lashing and Securing Arrangements on Road Vehicles for Sea Transportation on Ro/Ro Ships - General Requirements - Part 2:
ISO
9367-2
Semi-Trailers First Edition (CEN EN 29367-2:1994)
Measurement of Liquid Flow in Closed Conduits by the Weighing Method - Procedures for Checking Installations - Part 1: Static
ISO
9368-1
Weighing Systems First Edition
Plastics - Instrumental Determination of Radiant Exposure in Weathering Tests - General Guidance and Basic Test Method First
ISO
9370
Edition
ISO
9373
Cranes and Related Equipment - Accuracy Requirements for Measuring Parameters During Testing First Edition
ISO
9374-1
Cranes - Information to Be Provided - Part 1: General First Edition
ISO
9374-3
Cranes - Information to be Provided for Enquiries, Orders, Offers and Supply Part 3: Tower Cranes First Edition
ISO
9374-4
Cranes - Information to Be Provided - Part 4: Jib Cranes First Edition
ISO
9374-5
Cranes - Information to Be Provided - Part 5: Overhead Travelling Cranes and Portal Bridge Cranes First Edition
ISO
9375
Woodworking Machines - Disc Sanding Machines with Spindle in Fixed Position - Nomenclature First Edition
ISO
9376
Early Potatoes - Guide to Cooling and Refrigerated Transport First Edition
Water Quality - Determination of Hydrocarbon Oil Index - Part 2: Method Using Solvent Extraction and Gas Chromatography First
ISO
9377-2
Edition
ISO
9378
Photography - Vesicular Microfilm - Determination of ISO Speed and ISO Range First Edition
ISO
9379
Operating forces Test method Doors Second Edition
ISO
9380
Doorsets - Repeated Torsion Test First Edition
ISO
9381
Hinged or pivoted doors Determination of the resistance to static torsion Second Edition
ISO
9382
Shipborne Barges, All Series - Classification and Main Requirements First Edition
Products in fibre-reinforced cement Short corrugated or asymmetrical section sheets and fittings for roofing First Edition; Amendment
ISO
9383
1: 09/15/2004; Technical Corrigendum 1: 5/15/2005
ISO
9384
Fibre-cement siding shingles First Edition; Amendment 1: 9/1/2004; Corrigendum 1: 05/2005
ISO
9385
Glass and Glass-Ceramics - Knoop Hardness Test First Edition
Power-Operated Lifting Platforms for Persons with Impaired Mobility - Rules for Safety, Dimensions and Functional Operation - Part
ISO
9386-1
1: Vertical Lifting Platforms First Edition
Power-Operated Lifting Platforms for Persons with Impaired Mobility - Rules for Safety, Dimensions and Functional Operation - Part
ISO
9386-2
2: Powered Stairlifts for Seated, Standing and Wheelchair Users Moving in an Inclined Plane First Edition
ISO
9388
Nickel Alloys - Determination of Phosphorus Content - Molybdenum Blue Molecular Absorption Spectrometric Method First Edition
ISO
9390
Water Quality - Determination of Borate - Spectrometric Method Using Azomethine-H First Edition
Water Quality - Sampling in Deep Waters for Macro-Invertebrates - Guidance on the Use of Colonization, Qualitative and Quantitative
ISO
9391
Samplers First Edition; (CEN EN ISO 9391:1995)
ISO
9392
Agglomerated Cork Discs - Sealing Behaviour First Edition
ISO
9393-1
Thermoplastics valves for industrial applications Pressure test methods and requirements Part 1: General Second Edition
Thermoplastics Valves - Pressure Test Methods and Thermoplastics valves for industrial applications - Pressure test methods and
ISO
9393-2
requirements - Part 2: Test conditions and basic requirements Second Edition
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Determination of Biocompatibilty by Ocular Study with Rabbit
ISO
9394
Eyes Second Edition
Plastics - Phenolic Resins - Determination of the Gel Time of Resols Under Specific Conditions Using Automatic Apparatus Second
ISO
9396
Edition
Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 1:
ISO
9398-1
Flatwork Ironing Machines Second Edition
Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 2: Batch
ISO
9398-2
Drying Tumblers Second Edition
Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 3:
ISO
9398-3
Washing Tunnels Second Edition
Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 4:
ISO
9398-4
Washers-Extractors Second Edition
ISO
9400
Nickel-Based Alloys - Determination of Resistance to Intergranular Corrosion First Edition; CEN EN ISO 9400: 1995
Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for Pressure Purposes - Full Peripheral Magnetic
ISO
9402
Transducer/Flux Leakage Testing of Ferromagnetic Steel Tubes for the Detection of Longitudinal Imperfections First Edition
ISO
9403
Crude Petroleum - Transfer Accountability - Guidelines for Cargo Inspection First Edition
Enclosures for Protection Against Ionizing Radiation - Lead Shielding Units for 150 mm, 200 mm and 250 mm Thick Walls - Part 1:
ISO
9404-1
Chevron Units of 150 mm and 200 mm Thickness First Edition
ISO
9405
Textile Floor Coverings - Assessment of Changes in Appearance First Edition
Carbonaceous Materials for the Production of Aluminium - Green Coke - Determination of Volatile Matter Content by Gravimetric
ISO
9406
Analysis Second Edition
ISO
9407
Shoes Sizes - Mondopoint System of Sizing and Marking First Edition;
Water Quality - Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium by Determination of
ISO
9408
Oxygen Demand in a Closed Respirometer Second Edition
ISO
9409-1
Manipulating industrial robots Mechanical interfaces Part 1: Plates Third Edition
ISO
9409-2
Manipulating industrial robots Mechanical interfaces Part 2: Shafts Second Edition
Tyre Valves - Dimensions and Designation Valves Pour Pneumatiques - Dimensions Et Designation First Edition; Amendment 1:
ISO
9413
10/01/2001; Amendment 2: 10/15/2004
ISO
9414
Woodworking Machines - Curtain Coating Machines - Nomenclature First Edition
ISO
9415
Woodworking Machines - Wide Belt Sanding Machines - Nomenclature First Edition
ISO
9416
Paper - Determination of Light Scattering and Absorption Coefficients (Using Kubelka-Munk Theory) First Edition
ISO
9418
Aerospace - Rivets, Solid, in Aluminium or Aluminium Alloys - Procurement Specification First Edition
ISO
9424
Wood-based panels Determination of dimensions of test pieces Second Edition
ISO
9426
Wood-based panels Determination of dimensions of panels First Edition; Replaces ISO 9426-1
ISO
9427
Wood-Based Panels - Determination of Density Second Edition
ISO
9431
Construction Drawings - Spaces for Drawing and for Text, and Title Blocks on Drawing Sheets First Edition
ISO
9437
Shipbuilding - Inland Vessels - Matrosov Anchors First Edition
Metallurgical-Grade Fluorspar - Determination of Total Phosphorus Content - Reduced-Molybdophosphate Spectrometric Method
ISO
9438
Second Edition
Water Quality - Evaluation of Ultimate Biodegradability of Organic Compounds in Aqueous Medium - Carbon Dioxide Evolution Test
ISO
9439
Second Edition
ISO
9441
Steel - Determination of Niobium Content - PAR Spectrophotometric Method First Edition (AS/NZS 1050.31: 1994)
ISO
9442
Steel - Hot-Rolled Ribbed and Grooved Flats for Spring Leaves - Tolerances and Dimensions First Edition
Heat-Treatable and Alloy Steels - Surface Quality Classes for Hot-Rolled Round Bars and Wire Rods - Technical Delivery Conditions
ISO
9443
First Edition
ISO
9444
Continuously Hot-Rolled Stainless Steel Strip, Plate/Sheet and Cut Lengths - Tolerances on Dimensions and Form Second Edition
Continuously Cold-Rolled Stainless Stell Narrow Strip, Wide Strip, Plate/Sheet and Cut Lengths - Tolerances on Dimensions and
ISO
9445
Form Second Edition
ISO
9448-9
Tools for Pressing - Guide Bushes - Part 9: Form B, Ball Cage Bushes, Plain, Type 2 First Edition
ISO
9448-10
Tools for Pressing - Guide Bushes - Part 10: Form E, Gliding Bushes, Flanged, Type 2 First Edition
ISO
9448-11
Tools for Pressing - Guide Bushes - Part 11: Form F, Ball Cage Bushes, Flanged, Type 2 First Edition
ISO
9449
Tools for moulding ù Centring sleeves Second Edition
ISO
9451
Woodworking Machines - Hand-Loading Veneering Presses for Flat Surfaces - Nomenclature First Edition
ISO
9452
Woodworking Machines - Crosswise Veneer Splicing Machines - Nomenclature First Edition
ISO
9453
Soft Solder Alloys - Chemical Compositions and Forms Second Edition
Soft Soldering Fluxes - Classification and Requirements - Part 1: Classification, Labelling and Packaging First Edition (CEN EN
ISO
9454-1
29454-1: 1993)
ISO
9454-2
Soft Soldering Fluxes - Classification and Requirements - Part 2: Performance Requirements First Edition
Soft Soldering Fluxes - Test Methods - Part 1: Determination of Non- Volatile Matter, Gravimetric Method First Edition (CEN EN
ISO
9455-1
29455-1: 1993)
Soft Soldering Fluxes - Test Methods - Part 2: Determination of Non-Volatile Matter, Ebulliometric Method First Edition (CEN EN ISO
ISO
9455-2
9455-2: 1995)
Soft Soldering Fluxes - Test Methods - Part 3: Determination of Acid Value, Potentiometric and Visual Titration Methods First Edition;
ISO
9455-3
(CEN EN ISO 9455-3: 1994)
ISO
9455-5
Soft Soldering Fluxes - Test Methods - Part 5: Copper Mirror Test First Edition (CEN EN 29455-5: 1993)
ISO
9455-6
Soft Soldering Fluxes - Test Methods - Part 6: Determination and Detection of Halide (Excluding Fluoride) Content First Edition
ISO
9455-8
Soft Soldering Fluxes - Test Methods - Part 8: Determination of Zinc Content First Edition (CEN EN 29455-8: 1993)
ISO
9455-9
Soft Soldering Fluxes - Test Methods - Part 9: Determination of Ammonia Content First Edition (CEN EN ISO 9455-9: 1995)
ISO
9455-10
Soft Soldering Fluxes - Test Methods - Part 10: Flux Efficancy Tests, Solder Spread Method First Edition
ISO
9455-11
Soft Soldering Fluxes - Test Methods - Part 11: Solubility of Flux Residues First Edition (CEN EN 29455-11: 1993)
ISO
9455-12
Soft Soldering Fluxes - Test Methods - Part 12: Steel Tube Corrosion Test First Edition (CENELEC EN ISO 9455 -12 - 1994)
ISO
9455-13
Soft Soldering Fluxes - Test Methods - Part 13: Determination of Flux Spattering First Edition
ISO
9455-14
Soft Soldering Fluxes - Test Methods - Part 14: Assessment of Tackiness of Flux Residues First Edition (CEN EN 29455-14: 1993)
ISO
9455-15
Soft Soldering Fluxes - Test Methods - Part 15: Copper Corrosion Test First Edition
ISO
9455-16
Soft Soldering Fluxes - Test Methods - Part 16: Flux Efficacy Tests, Wetting Balance Method First Edition
Soft soldering fluxes Test methods Part 17: Surface insulation resistance comb test and electrochemical migration test of flux
ISO
9455-17
residues First Edition
ISO
9457-1
Road Vehicles - Metric Starter Motor Pinions - Part 1: Currently Used Pinions First Edition
ISO
9457-2
Road Vehicles - Metric Starter Motor Pinions - Part 2: Pinions with 20 Degrees Pressure Angle First Edition
ISO
9458
Passenger Cars - Starter Motor Electrical Connections First Edition
Solar Heating - Domestic Water Heating Systems - Part 1: Performance Rating Procedure Using Indoor Test Methods First Edition
ISO
9459-1
AS/NZS 4445.1:1993
Solar Heating - Domestic Water Heating Systems - Part 2: Outdoor Test Methods for System Performance Characterization and
ISO
9459-2
Yearly Performance Prediction of Solar-Only Systems First Edition
Solar heating ù Domestic water heating systems ù Part 5: System performance characterization by means of whole-system tests and
ISO
9459-5
computer simulation First Edition
ISO
9461
Hydraulic Fluid Power - Identification of Valve Ports, Subplates, Control Devices and Solenoids First Edition
ISO
9462
Alpine ski-bindings Requirements and test methods Third Edition
Nitric Acid Feed Solutions from Reprocessing Plants - Spectrophotometric Determination of Plutonium After Oxidation to Plutonium
ISO
9463
(VI) First Edition
ISO
9465
Alpine Ski-Bindings - Lateral Release Under Impact Loading - Test Method First Edition
ISO
9467
Forestry Machinery - Portable Chain-Saws and Brush-Cutters - Exhaust System-Caused Fire Risk First Edition
ISO
9469
Air Cargo Equipment - Unit Load Devices for Transportation of Horses First Edition
Textile machinery and accessories Strip steel for dents of reeds Part 1: Cold rolled strip steel First Edition; Together with ISO 9473-
ISO
9473-1
2:2006 Cancels and Replaces ISO 9473:1988
Textile machinery and accessories Strip steel for dents of reeds Part 2: Hardened strip steel First Edition; Together with ISO 9473-
ISO
9473-2
1:2006 Cancels and Replaces ISO 9473:1988
ISO
9475
Aircraft Inner Tube and Tubeless Tyre Valves - Cores and Caps - Test Methods First Edition
ISO
9477
High Strength Cast Steels for General Engineering and Structural Purposes First Edition
Workplace Air - Determination of Vaporous Chlorinated Hydrocarbons - Charcoal Tube/Solvent Desorption/ Gas Chromatographic
ISO
9486
Method First Edition
Workplace Air - Determination of Vaporous Aromatic Hydrocarbons - Charcoal Tube/Solvent Desorption/ Gas Chromatographic
ISO
9487
Method First Edition
ISO
9488
Solar Energy - Vocabulary Energie Solaire - Vocabulaire First Edition
ISO
9496
CHILL The ITU-T programming language Fourth Edition
ISO
9497
Fluorspar - Experimental Methods for Evaluation of Quality Variation First Edition
ISO
9498
Fluorspar - Experimental Methods for Checking the Bias of Sampling and Sample Preparation First Edition
ISO
9499
Fluorspar - Method of Determining the Precision of Sampling and Sample Preparation First Edition
ISO
9501
Metallurgical-Grade Fluorspar - Determination of Total Sulfur Content - Iodometric Method After Combustion First Edition
ISO
9502
Metallurgical-Grade Fluorspar - Determination of Silica Content - Reduced-Molybdosilicate Spectrometric Method Second Edition
ISO
9503
Metallurgical-Grade Fluorspar - Determination of Available Fluorine Content - Modified Willard-Winter Method First Edition
Metallurgical-Grade Fluorspar - Determination of Antimony Content - Solvent Extraction Atomic Absorption Spectrometric Method
ISO
9504
Second Edition
ISO
9505
All Grades of Fluorspar - Determination of Arsenic Content - Silver Diethyldithiocarbamate Spectrometric Method First Edition
ISO
9506-1
Industrial Automation Systems - Manufacturing Message Specification - Part 1: Service Definition Second Edition
ISO
9506-2
Industrial Automation Systems - Manufacturing Message Specification - Part 2: Protocol Specification Second Edition
Industrial automation systems - Manufacturing message specification - Part 5: Companion Standard for Programmable Controllers
Syst×mes d automatisation industrielle - SpÚcification de messagerie industrielle - Partie 5: Norme d accompagnement pour les
ISO
9506-5
Automates Programmables First Edition
Industrial automation systems - Manufacturing message specification - Part 6: Companion Standard for Process Control Systeme
d'automatisation industrille - Specification de messagerie industrielle - Partie 6: Norme d'accompagnement pour la conduite de
ISO
9506-6
procede First Edition
ISO
9507
Iron Ores - Determination of Total Iron Content - Titanium(III) Chloride Reduction Methods First Edition
ISO
9509
Water quality Toxicity test for assessing the inhibition of nitrification of activated sludge microorganisms Second Edition
ISO
9512
Cigarettes - Determination of Ventilation - Definitions and Measurement Principles Second Edition
ISO
9513
Metallic Materials - Calibration of Extensometers Used in Uniaxial Testing Second Edition; Corrected and Reprinted 02/01/2001
Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and
ISO
9514
guidelines for testing Second Edition
Iron Ores - Determination of Silicon, Calcium, Manganese, Aluminium, Titanium, Magnesium, Phosphorus, Sulfur and Potassium -
ISO
9516
Wavelength Dispersive X-Ray Fluorescence Spectrometric Method First Edition
ISO
9516-1
Iron Ores - Determination of Various Elements by X-ray Fluorescence Spectrometry - Part 1: Comprehensive Procedure First Edition
ISO
9517
Iron ores ù Determination of water-soluble chloride ù Ion-selective electrode method Second Edition
ISO
9518
Forestry Machinery - Portable Chain-Saws - Kickback Test Second Edition
ISO
9519
Shipbuilding and Marine Structures - Rungs for Dog-Step Ladders First Edition (CEN EN 29519: 1994)
ISO
9523
Touring Ski-Boots for Adults - Interface with Ski-Binding First Edition
ISO
9524
Machine Tools - Front Faces of Spindle Holders for Machining Centres - Functional Dimensions First Edition
Cinematography - Recording Head Gaps for Two Sound Records on 17,5 mm Magnetic Film - Positions and Width Dimensions First
ISO
9525
Edition
ISO
9526
Fruits, Vegetables and Derived Products - Determination of Iron Content by Flame Atomic Absorption Spectrometry First Edition
Aerospace - Standard-Weight Polytetrafluoroethylene (PTFE) Hose Assemblies, Classification 204 Degrees Celsius/21 000 kPa -
ISO
9528
Procurement Specification Second Edition
Information Processing Systems - Data Interchange on 90 mm (3,5 in) Flexible Disk Cartridges Using Modified Frequency Modulation
ISO
9529-1
Recording at 15 916 ftprad, on 80 Tracks on Each Side - Part 1: Dimensional, Physical and Magnetic Characteristics First Edition
Information Processing Systems - Data Interchange on 90 mm (3,5 in) Flexible Disk Cartridges Using Modified Frequency Modulation
ISO
9529-2
Recording at 15 916 ftprad, on 80 Tracks on Each Side - Part 2: Track Format First Edition
ISO
9533
Earth-Moving Machinery - Machine-Mounted Forward and Reverse Audible Warning Alarm - Sound Test Method First Edition
ISO
9534
Road Vehicles - Fuel Pump Electric Connections First Edition
ISO
9535
Woodworking Machines - Machines for Production of Core Stock from Laths - Nomenclature First Edition
ISO
9536
Woodworking Machines - Mortising Machines with Oscillating Tool Action - Nomenclature First Edition
ISO
9537
Woodworking Machines - Single-End Edge Bonding Machines - Nomenclature First Edition
ISO
9538
Aerospace - Hydraulic Tubing Joints and Fittings - Planar Flexure Test First Edition
ISO
9539
Materials for Equipment Used in Gas Welding, Cutting and Allied Processes First Edition
Information Technology - Font Information Interchange - Part 1: Architecture First Edition; Technical Corrigendum 1: 10/01/1992;
Technical Corrigendum 2: 07/15/1994; Technical Corrigendum 3: 07/01/1995; Amendment 1: 1/15/2001; Amendment 2: 12/15/1998;
ISO
9541-1
Amendment 3: 12/15/2000
Information Technology - Font Information Interchange - Part 2: Interchange Format First Edition; Corrigendum 1: 1993; Corrigendum
ISO
9541-2
2: 1995; Amendment 1: 12/15/2000
ISO
9541-3
Information technology - Font information interchange - Part 3: Glyph shape representation First Edition; Amendment 1: 10/01/2005
Information Processing Systems - Telecommunications and Information Exchange between Systems - End System to Intermediate
System Routeing Exchange Protocol for Use in Conjunction with the Protocol for Providing the Connectionless-Mode Network
ISO
9542
Service (ISO 8473) Amendment 1: 09/15/1999
Information Processing Systems - Information Exchange Between Systems - Synchronous Transmission Signal Quality at DTE/DCE
ISO
9543
Interfaces First Edition
ISO
9545
Information Technology - Open Systems Interconnection - Application Layer Structure Second Edition
Information Technology - Open Systems Interconnection - Connectionless Session Protocol: Protocol Specification First Edition;
ISO
9548-1
Amendment 1: 12/15/2000
Information Technology - Open Systems Interconnection - Connectionless Session Protocol: Protocol Implementation Conformance
ISO
9548-2
Statement (PICS) Proforma First Edition
ISO
9549
Information Technology - Galvanic Isolation of Balanced Interchange Circuits First Edition; AS/NZS 4162: 1994
ISO
9553
Solar Energy - Methods of Testing Preformed Rubber Seals and Sealing Compounds Used in Collectors First Edition
ISO
9554
Fibre ropes General specifications Second Edition
Measurement of Liquid Flow in Open Channels - Tracer Dilution Methods for the Measurement of Steady Flow - Part 1: General First
ISO
9555-1
Edition
Measurement of Liquid Flow in Open Channels - Tracer Dilution Methods for the Measurement of Steady Flow - Part 2: Radioactive
ISO
9555-2
Tracers First Edition
Measurement of Liquid Flow in Open Channels - Tracer Dilution Methods for the Measurement of Steady Flow - Part 3: Chemical
ISO
9555-3
Tracers First Edition
Measurement of Liquid Flow in Open Channels - Tracer Dilution Methods for the Measurement of Steady Flow - Part 4: Fluorescent
ISO
9555-4
Tracers First Edition
Steel and Iron - Determination of Total Carbon Content - Infrared Absorption Method After Combustion in an Induction Furnace First
ISO
9556
Edition; (Corrected and Reprinted -1989)
ISO
9558
Woodworking Machines - Veneer Slicing Machines - Nomenclature First Edition
ISO
9559
Photography - 35 mm Filmstrip Projectors - Specifications for Frame Masks First Edition
ISO
9562
Water Quality - Determination of Adsorbable Organically Bound Halogens (AOX) Third Edition
ISO
9563
Belt Drives - Electrical Conductivity of Antistatic Endless Synchronous Belts - Characteristics and Test Method First Edition
Banking - Personal Identification Number (PIN) Management and Security - Part 1: Basic Principles and Requirements for Online PIN
ISO
9564-1
Handling in ATM and POS Systems Second Edition
Banking - Personal Identification Number Management and Security - Part 2: Approved Algorithm(s) for PIN Encipherment Second
ISO
9564-2
Edition
Banking Personal Identification Number management and security Part 3: Requirements for offline PIN handling in ATM and POS
ISO
9564-3
systems First Edition
ISO
9565
Two-Wheeled Motorcycles - Parking Stability of Side- and Centre-Stands First Edition
ISO
9566
Woodworking Machines - Single-End Tenoning Machines with Several Spindles - Nomenclature First Edition
ISO
9567
Woodworking Machines - Horizontal Shredding Machines for Wood Wool Production, Quadruple Effect - Nomenclature First Edition
ISO
9568
Cinematography - Background Acoustic Noise Levels in Theatres, Review Rooms and Dubbing Rooms First Edition
Information Technology - Provision of the OSI Connection-Mode Network Service by Packet Mode Terminal Equipment to an
ISO
9574
Integrated Services Digital Network (ISDN) Second Edition; AS/NZS 4099: 1994
Information Technology - Open Systems Interconnection - Connectionless Presentation Protocol: Protocol Specification Second
ISO
9576-1
Edition; Amendment 1: 12/15/2000
Information Technology - Open Systems Interconnection - Connectionless Presentation Protocol: Protocol Implementation
ISO
9576-2
Conformance Statement (PICS) Proforma First Edition
ISO
9579
Information Technology - Remote Database Access for SQL with Security Enhancement Second Edition
ISO
9583
Implants for Surgery - Non-Destructive Testing - Liquid Penetrant Inspection of Metallic Surgical Implants First Edition
ISO
9584
Implants for Surgery - Non-Destructive Testing - Radiographic Examination of Cast Metallic Surgical Implants First Edition
ISO
9585
Implants for Surgery - Determination of Bending Strength and Stiffness of Bone Plates First Edition
ISO
9587
Metallic and Other Inorganic Coatings - Pretreatment of Iron or Steel to Reduce the Risk of Hydrogen Embrittlement First Edition
Metallic and Other Inorganic Coatings - Post-Coating Treatments of Iron or Steel to Reduce the Risk of Hydrogen Embrittlement First
ISO
9588
Edition
ISO
9589
Escalators - Building Dimensions First Edition
ISO
9591
Corrosion of aluminium alloys Determination of resistance to stress corrosion cracking Second Edition
Information Technology - Computer Graphics and Image Processing - Programmer s Hierarchical Interactive Graphics System
ISO
9592-1
(PHIGS) - Part 1: Functional Description Second Edition
Information Technology - Computer Graphics and Image Processing - Programmer s Hierarchical Interactive Graphics System
ISO
9592-2
(PHIGS) - Part 2: Archive File Format Second Edition
Information Technology - Computer Graphics and Image Processing - Programmer s Hierarchical Interactive Graphics System
ISO
9592-3
(PHIGS) - Part 3: Specification for Clear-Text Encoding of Archive File Second Edition
Information Processing Systems - Computer Graphics - Programmer s Hierarchical Interactive Graphics System (PHIGS) Language
Bindings - Part 1: FORTRAN First Edition; Corrigendum 1-1993; Corrigendum 2-1994; Amendment 1- 1995; NZS/ISO/IEC 9593.1:
ISO
9593-1
1990
Information Technology - Computer Graphics - Programmer s Hierarchical Interactive Graphics System (PHIGS) Language Bindings
ISO
9593-3
- Part 3: Ada First Edition; Amendment 1-1994; Corrigendum 1-1993; Corrigendum 2-1994
Information Technology - Computer Graphics - Programmer s Hierarchical Interactive Graphics System (PHIGS) Language Bindings
- Part 4: C First Edition; Amendment 1: 05-01-1994; Technical Corrigendum 1: 08-01-1994; Amendment 2: Incorporation of PHIGS
ISO
9593-4
Amendments: 12-15-1998
ISO
9594-1
Information technology Open Systems Interconnection The Directory: Overview of concepts, models and services Fifth Edition
ISO
9594-2
Information technology Open Systems Interconnection The Directory: Models Fifth Edition
ISO
9594-3
Information technology Open Systems Interconnection The Directory: Abstract service definition Fifth Edition
ISO
9594-4
Information technology Open Systems Interconnection The Directory: Procedures for distributed operation Fifth Edition
ISO
9594-5
Information technology Open Systems Interconnection The Directory: Protocol specifications Fifth Edition
Information technology ù Open Systems Interconnection ù The Directory: Selected attribute types TECHNICAL CORRIGENDUM 2
ISO
9594-6 CORR 2
Fifth Edition
ISO
9594-6
Information technology Open Systems Interconnection The Directory: Selected attribute types Fifth Edition
ISO
9594-7
Information technology Open Systems Interconnection The Directory: Selected object classes Fifth Edition
ISO
9594-8
Information technology Open Systems Interconnection The Directory: Publickey and attribute certificate frameworks Fifth Edition
ISO
9594-9
Information technology Open Systems Interconnection The Directory: Replication Fourth Edition
Information Technology - Open Systems Interconnection - The Directory: Use of Systems Management for Administration of the
ISO
9594-10
Directory Third Edition
ISO
9595
Information Technology - Open Systems Interconnection - Common Management Information Service Third Edition
Information Technology - Open Systems Interconnection - Common Management Information Protocol - Part 1: Specification Third
ISO
9596-1
Edition; Technical Corrigendum 1: 12/15/1999; Corrigendum 2: 12/01/2002
Information Technology - Open Systems Interconnection - Common Management Information Protocol: Protocol Implementation
Conformance Statement (PICS) Proforma First Edition; Technical Corrigendum 1: 06/15/1993; Technical Corrigendum 2: 12/15/1996;
ISO
9596-2
Technical Corrigendum 3: 12/15/1998
ISO
9597
Cements - Test Methods - Determination of Setting Time and Soundness First Edition
Seamless Steel Tubes for Pressure Purposes - Full Peripheral Magnetic Transducer/Flux Leakage Testing of Ferromagnetic Steel
ISO
9598
Tubes for the Detection of Transverse Imperfections First Edition
Copper, Lead and Zinc Sulfide Concentrates - Determination of Hygroscopic Moisture in the Analysis Sample - Gravimetric Method
ISO
9599
First Edition (PNS 844:1993)
ISO
9606-1
Approval Testing of Welders - Fusion Welding - Part 1: Steels First Edition; Amendment 1-1998
ISO
9606-2
Qualification test of welders Fusion welding Part 2: Aluminium and aluminium alloys Second Edition
ISO
9606-3
Approval Testing of Welders - Fusion Welding - Part 3: Copper and Copper Alloys First Edition
ISO
9606-4
Approval Testing of Welders - Fusion Welding - Part 4: Nickel and Nickel Alloys First Edition
ISO
9606-5
Approval Testing of Welders - Fusion Welding - Part 5: Titanium and Titanium Alloys, Zirconium and Zirconium Alloys First Edition
ISO
9608
V-Belts - Uniformity of Belts - Test Method for Determination of Centre Distance Variation Second Edition
Aerospace - Nuts, Hexagonal, Plain, Reduced Height, Normal Across Flats, with MJ Threads, Classifications: 450 MPa (at Ambient
Temp.)/120 Deg. C, 450 MPa (at Ambient Temp.)/235 Deg. C, 600 MPa (at Ambient Temp.)/425 Deg. C, 900 MPa (at Ambient
Temp.)/235 Deg. C, 900 MPa (at Ambient Temp.)/315 Deg. C, 900 MPa (at Ambient Temp.)/650 Deg. C, 1 100 MPa (at Ambient
Temp.)/235 Deg. C, 1 100 MPa (at Ambient Temp.)/730 Deg. C and 1250 MPa (at Ambient Temp.)/600 Deg. C - Dimensions First
ISO
9609
Edition
Acoustics - Characterization of Sources of Structure- Borne Sound with Respect to Sound Radiation from Connected Structures -
ISO
9611
Measurement of Velocity at the Contact Points of Machinery When Resiliently Mounted First Edition
ISO
9612
Acoustics - Guidelines for the Measurement and Assessment of Exposure to Noise in a Working Environment First Edition
Acoustics - Attenuation of Sound During Propagation Outdoors - Part 1: Calculation of the Absorption of Sound by the Atmosphere
ISO
9613-1
First Edition
ISO
9613-2
Acoustics - Attenuation of Sound During Propagation Outdoors - Part 2: General Method of Calculation First Edition
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 1: Measurement at Discrete Points
ISO
9614-1
First Edition (CEN EN ISO 9614-1: 1995)
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 2: Measurement by Scanning First
ISO
9614-2
Edition
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 3: Precision Method for
ISO
9614-3
Measurement by Scanning First Edition
Woodworking Machines - Vertical Shredding Machines for Wood Wool Production, with Hydraulic Clamping - Nomenclature First
ISO
9615
Edition
ISO
9616
Woodworking Machines - Circular Sawing Machines for Building Sites - Nomenclature First Edition
ISO
9617
Woodworking Machines - Lifting Tables and Stages - Nomenclature First Edition
Aerospace-Nuts, Hex., Slotted (Castellated), Red. Hght., Norm. Across Flats, With MJ Threads, Cl.s: 450MPa (at Ambient Temp)/120
Deg. C,450MPa (at Ambient Temp)/235 Deg. C, 600MPa(at Ambient Temp)/425 Deg. C, 900MPa(at Ambient Temp)/235 Deg. C,
900Mpa(at Ambient Temp)/315 Deg. C, 900MPa(at Ambient Temp)/650 Deg. C, 1100MPa(at Ambient Temp)/235 Deg. C,
ISO
9618
1100MPa(at Ambient Temp)/730 Deg., and 1250MPa First Edition
ISO
9619
Passenger Cars - Windscreen Wiping Systems - Test Method First Edition Amendment 1; 7/01/2002
Whole Milk - Determination of Milkfat, Protein and Lactose Content - Guidance on the Operation of Mid-Infrared Instruments First
ISO
9622
Edition
PE/Metal and PP/Metal Adaptor Fittings for Pipes for Fluids Under Pressure - Design Lengths and Size of Threads - Metric Series
ISO
9623
First Edition
ISO
9624
Thermoplastics Pipes for Fluids under Pressure - Mating Dimensions of Flange Adapters and Loose Backing Flanges First Edition
ISO
9625
Mechanical Joint Fittings for Use with Polyethylene Pressure Pipes for Irrigation Purposes First Edition
ISO
9626
Stainless Steel Needle Tubing for Manufacture of Medical Devices Amendment 1:06/01/2001
ISO
9628
Rolling bearings Insert bearings and eccentric locking collars Boundary dimensions and tolerances Second Edition
ISO
9631
Rubber seals Joint rings for pipelines for hot-water supply up to 110 C Specification for the material Second Edition
ISO
9633
Cycle Chains - Characteristics and Test Methods Second Edition
ISO
9634
Aerospace - Fluid Systems - Dimensions of Plastic Protective Caps and Plugs First Edition
Agricultural irrigation equipment Irrigation valves Part 1: General requirements First Edition; Together with ISO 9635-2, ISO 9635-3,
ISO
9635-1
ISO 9635-4 and ISO 9635-5 replaces ISO 9635:1990
Agricultural irrigation equipment Irrigation valves Part 2: Isolating valves First Edition; Together with ISO 9635-1, ISO 9635-3, ISO
ISO
9635-2
9635-4 and ISO 9635-5 replaces ISO 9635:1990
Agricultural irrigation equipment Irrigation valves Part 3: Check valves First Edition; Together with ISO 9635-1, ISO 9635-2, ISO
ISO
9635-3
9635-4 and ISO 9635-5 replaces ISO 9635:1990 [Superseded: ISO 9952]
Agricultural irrigation equipment Irrigation valves Part 4: Air valves First Edition; Together with ISO 9635-1, ISO 9635-2, ISO 9635-3
ISO
9635-4
and ISO 9635-5 replaces ISO 9635:1990 [Superseded: ISO 11419]
Agricultural irrigation equipment Irrigation valves Part 5: Control valves First Edition; Together with ISO 9635-1, ISO 9635-2, ISO
ISO
9635-5
9635-3 and ISO 9635-4 replaces ISO 9635:1990
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional
ISO
9636-1
Specification - Part 1: Overview, Profiles, and Conformance First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional
ISO
9636-2
Specification - Part 2: Control First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional
ISO
9636-3
Specification - Part 3: Output First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional
ISO
9636-4
Specification - Part 4: Segments First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional
ISO
9636-5
Specification - Part 5: Input and Echoing First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional
ISO
9636-6
Specification - Part 6: Raster First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Data Stream
ISO
9637-1
Binding - Part 1: Character Encoding First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Data Stream
ISO
9637-2
Binding - Part 2: Binary Encoding First Edition
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Language
ISO
9638-3
Bindings - Part 3: Ada First Edition
ISO
9642
Cinematography - Time and Control Code for 24, 25 and 30 Frames Per Second Motion-Picture Systems - Specifications First Edition
ISO
9644
Agricultural Irrigation Equipment - Pressure Losses in Irrigation Valves - Test Method First Edition; Amendment 1-1998
ISO
9645
Acoustics - Measurement of Noise Emitted by Two-Wheeled Mopeds in Motion - Engineering Method First Edition
Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 1: General
ISO
9646-1
Concepts Second Edition; CEN EN 29646-1: 1992; CAN/CSA-ISO/IEC 9646-1-95 CEN EN ISO/IEC 9646-1: 1996
Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 2: Abstract Test
ISO
9646-2
Suite Specification Second Edition; CAN/CSA-ISO/IEC-9646-2-95; CEN EN ISO/IEC 9646-2: 1996
Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 3: The Tree and
ISO
9646-3
Tabular Combined Notation (TTCN) Second Edition
Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 4: Test
ISO
9646-4
Realization Second Edition; CAN/CSA-ISO/IEC 9646-4-95; CEN EN ISO/IEC 9646-4: 1996
Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 5: Requirements
on Test Laboratories and Clients for the Conformance Assessment Process Second Edition; CAN/CSA-ISO/IEC 9646-5-95; CEN EN
ISO
9646-5
ISO/IEC 9646-5: 1996
Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 6: Protocol
ISO
9646-6
Profile Test Specification First Edition; CEN EN ISO/IEC 9646-6: 1996
Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 7:
ISO
9646-7
Implementation Conformance Statements First Edition; Corrigendum 1 04/01/1997
Steel and Iron - Determination of Vanadium Content - Flame Atomic Absorption Spectrometric Method First Edition AS/NZS 1050.38:
ISO
9647
1994)
ISO
9648
Sorghum - Determination of Tannin Content First Edition
ISO
9649
Metallic Materials - Wire - Reverse Torsion Test First Edition
ISO
9650-1
Small craft Inflatable liferafts Part 1: Type I First Edition
ISO
9650-2
Small craft Inflatable liferafts Part 2: Type II First Edition
ISO
9650-3
Small craft Inflatable liferafts Part 3: Material First Edition
ISO
9652-2
Masonry - Part 2: Unreinforced Masonry Design by Simple Rules First Edition
ISO
9652-4
Masonry - Part 4: Test Methods First Edition
ISO
9652-5
Masonry - Part 5: Vocabulary First Edition
ISO
9653
Adhesives - Test Method for Shear Impact Strength of Adhesive Bonds Second Edition
ISO
9654
Pliers and nippers for electronics Single-purpose nippers Cutting nippers Second Edition
ISO
9655
Pliers and nippers for electronics Single-purpose pliers Pliers for gripping and manipulating Second Edition
ISO
9656
Pliers and nippers for electronics Test methods Second Edition
ISO
9657
Pliers and nippers for electronics General technical requirements Second Edition
ISO
9658
Steel - Determination of Aluminium Content - Flame Atomic Absorption Spectrometric Method First Edition
Information Processing - Volume and File Structure of CD-ROM for Information Interchange First Edition; (Corrected and Reprinted -
ISO
9660
1988)
Information Technology - Data Interchange on 12,7 mm Wide Magnetic Tape Cartridges - 18 Tracks, 1 491 Data Bytes per Millimetre
ISO
9661
Second Edition
Aircraft Equipment - Environmental and Operating Conditions for Airborne Equipment - Humidity, Temperature and Pressure Tests
ISO
9662
First Edition
ISO
9664
Adhesives - Test Methods for Fatigue Properties of Structural Adhesives in Tensile Shear First Edition (CEN EN ISO 9664: 1995)
ISO
9665
Adhesives - Animal Glues - Methods of Sampling and Testing Second Edition
ISO
9666
Aircraft - Self-Propelled Lavatory-Servicing Vehicle - Functional Requirements First Edition
ISO
9667
Aircraft Ground Support Equipment - Tow Bars First Edition
ISO
9668
Pulps - Determination of Magnesium Content - Flame Atomic Absorption Spectrometric Method First Edition
Series 1 Freight Containers - Interface Connections for Tank Containers Amendment 1: Sections 3 and 4 First Edition; Amendment 1:
ISO
9669
1992
ISO
9678
Aircraft - Self-Propelled Potable-Water Vehicle First Edition
ISO
9679
Aerospace Clamps for fluid systems Test methods First Edition
ISO
9680
Dentistry ù Operating lights Second Edition
ISO
9681
Manganese Ores and Concentrates - Determination of Iron Content - Flame Atomic Absorption Spectrometric Method First Edition
ISO
9682-1
Iron Ores - Determination of Manganese Content - Part 1: Flame Atomic Absorption Spectrometric Method First Edition
Iron ores Determination of manganese content Part 2: Periodate spectrophotometric method First Edition;:1986 [Replaced: ISO
ISO
9682-2
3886]
ISO
9683-1
Iron ores Determination of vanadium Part 1: BPHA spectrophotometric method First Edition;:1991
ISO
9684
Iron Ores - Determination of Vanadium Content - Flame Atomic Absorption Spectrometric Methods First Edition
Direct reduced iron Determination of carbon and/or sulfur High-frequency combustion method with infrared measurement Second
ISO
9686
Edition
ISO
9687
Dental Equipment - Graphical Symbols First Edition; (CEN EN ISO 9687: 1995)
Mechanical Vibration and Shock - Analytical Methods of Assessing Shock Resistance of Mechanical Systems - Information Exchange
ISO
9688
Between Suppliers and Users of Analyses First Edition
Raw Optical Glass - Resistance to Attack by Aqueous Alkaline Phosphate-Containing Detergent Solutions at 50 Degrees Celsius -
ISO
9689
Testing and Classification First Edition
ISO
9691
Rubber - Recommendations for the Workmanship of Pipe Joint Rings - Description and Classification of Imperfections First Edition
Welding and allied processes Recommendations for joint preparation Part 1: Manual metal-arc welding, gas-shielded metal-arc
ISO
9692-1
welding, gas welding, TIG welding and beam welding of steels First Edition;
ISO
9692-2
Welding and Allied Processes - Joint Preparation - Part 2: Submerged Arc Welding of Steels First Edition
Welding and Allied Processes - Recommendations for Joint Preparation - Part 3: Metal Inert Gas Welding and Tungsten Inert Gas
ISO
9692-3
Welding of Aluminium and its Alloys First Edition
ISO
9692-4
Welding and allied processes - Recommendations for joint preparation Part 4: Clad steels First Edition
ISO
9693
Metal-Ceramic Dental Restorative Systems Second Edition; Amendment 1: 10/01/2005
ISO
9696
Water Quality - Measurement of Gross Alpha Activity in Non- Saline Water - Thick Source Method First Edition
ISO
9697
Water Quality - Measurement of Gross Beta Activity in Non- Saline Water First Edition
ISO
9698
Water Quality - Determination of Tritium Activity Concentration - Liquid Scintillation Counting Method First Edition
ISO
9699
Performance Standards in Building - Checklist for Briefing - Contents of Brief for Building Design First Edition
ISO
9701
Wrist and Pocket Watches - Fitting Diameters for Hour, Minute and Second Hands First Edition
ISO
9702
Plastics - Amine Epoxide Hardeners - Determination of Primary, Secondary and Tertiary Amine Group Nitrogen Content First Edition
ISO
9704
Passenger Cars - Wiper Systems - Shaft Ends and Arm-Holes First Edition
ISO
9705
Fire Tests - Full-Scale Room Test for Surface Products First Edition; (Corrigendum 1 - 1993) (Corrected and Reprinted 1996)
ISO
9706
Information and Documentation - Paper for Documents - Requirements for Permanence First Edition
Information and Documentation - Statistics on the Production and Distribution of Books, Newspapers, Periodicals and Electronic
ISO
9707
Publications First Edition (CEN EN ISO 9707 : 1994)
ISO
9709
Structural timber - Visual strength grading - Basic principles First Edition
ISO
9711-1
Freight Containers - Information Related to Containers on Board Vessels - Part 1: Bay Plan System First Edition
ISO
9711-2
Freight Containers - Information Related to Containers on Board Vessels - Part 2: Telex Data Transmission First Edition
ISO
9712 CORR 1
Non-destructive testing ù Qualification and certification of personnel TECHNICAL CORRIGENDUM 1 Third Edition
ISO
9712
Non-destructive testing ù Qualification and certification of personnel Third edition
ISO
9713
Neurosurgical Implants - Self-Closing Intracranial Aneurysm Clips Second Edition
ISO
9714-1
Orthopaedic Drilling Instruments - Part 1: Drill Bits, Taps and Countersink Cutters First Edition
ISO
9717
Phosphate Conversion Coatings for Metals - Method of Specifying Requirements First Edition
ISO
9719
Root Vegetables - Cold Storage and Refrigerated Transport First Edition
ISO
9722
Nickel and Nickel Alloys - Composition and Forms of Wrought Products First Edition
ISO
9723
Nickel and Nickel Alloy Bars First Edition
ISO
9724
Nickel and Nickel Alloy Wire and Drawing Stock First Edition
ISO
9725
Nickel and Nickel Alloy Forgings First Edition
ISO
9727-1
Cylindrical cork stoppers - Physical tests - Part 1: Determination of dimensions First Edition [Superseded: ISO 9727]
Cylindrical cork stoppers ù Physical tests ù Part 2: Determination of mass and apparent density for agglomerated cork stoppers First
ISO
9727-2
Edition [Superseded: ISO 9727]
ISO
9727-3
Cylindrical cork stoppers ù Physical tests ù Part 3: Determination of humidity content First Edition [Superseded: ISO 9727]
Cylindrical cork stoppers ù Physical tests ù Part 4: Determination of dimensional recovery after compression First Edition
ISO
9727-4
[Superseded: ISO 9727]
ISO
9727-5
Cylindrical cork stoppers ù Physical tests ù Part 5: Determination of extraction force First Edition [Superseded: ISO 9727]
ISO
9727-6
Cylindrical cork stoppers ù Physical tests ù Part 6: Determination of liquid tightness First Edition [Superseded: ISO 9727]
ISO
9727-7
Cylindrical cork stoppers ù Physical tests ù Part 7: Determination of dust content First Edition [Superseded: ISO 9727]
Electronic data interchange for administration, commerce and transport (EDIFACT) Application level syntax rules (Syntax version
ISO
9735-1
number: 4, Syntax release number: 1) Part 1: Syntax rules common to all parts Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax
ISO
9735-2
Version Number: 4, Syntax Release Number: 1) - Part 2: Syntax Rules Specific to Batch EDI Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax
ISO
9735-3
Version Number: 4, Syntax Release Number: 1) - Part 3: Syntax Rules Specific to Interactive EDI Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax
Version Number: 4, Syntax Release Number: 1) - Part 4: Syntax and Service Report Message for Batch EDI (Message Type -
ISO
9735-4
CONTRL) Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax
Version Number: 4, Syntax Release Number: 1) - Part 5: Security Rules for Batch EDI (Authenticity, Integrity and Non-Repudiation of
ISO
9735-5
Origin) Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax
Version Number: 4, Syntax Release Number: 1) - Part 6: Secure Authentication and Acknowledgement Meassage (Message Type -
ISO
9735-6
AUTACK) Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax
ISO
9735-7
Version Number: 4, Syntax Release Number: 1) - Part 7: Security Rules for Batch EDI (Confidentiality) Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax
ISO
9735-8
Version Number: 4, Syntax Release Number: 1) - Part 8: Associated Data in EDI Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) Application Level Syntax Rules (Syntax
Version Number: 4, Syntax Release Number: 1) Part 9: Security Key and Certificate Management Message (Message Type
ISO
9735-9
KEYMAN) Second Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) Application Level Syntax Rules (Syntax
ISO
9735-10
Version Number: 4, Syntax Release Number: 1) Part 10: Syntax Service Directories Replaces ISO 9735-1 Thru 9735-9
ISO
9736
Aerospace - Eye-Ends, in Steel, Threaded, for Aircraft Control Wire Rope - Dimensions and Loads First Edition
ISO
9737
Aerospace - Eye-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads First Edition
ISO
9738
Aerospace - Turnbarrels, for Aircraft Control Wire Rope - Dimensions and Loads First Edition
Aerospace - Double-Shank Ball-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads
ISO
9747
First Edition
ISO
9748
Aerospace - Ball-Ends, in corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads First Edition
ISO
9749
Aerospace - Stud-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads First Edition
ISO
9757
Aerospace - Fork-Ends, in Steel, Threaded, for Aircraft Control Wire Rope Turnbarrels - Dimensions and Loads First Edition
ISO
9758
Aerospace - Fork-Ends, in Steel, Threaded, for Rolling Bearings, for Aircraft Control Wire Rope - Dimensions and Loads First Edition
ISO
9759
Aerospace - Fork-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope - Dimensions and Loads First Edition
Aerospace - Fork-Ends, in Corrosion-Resistant Steel, Swaged on Aircraft Control Wire Rope, for Rolling Bearings - Dimensions and
ISO
9760
Loads First Edition
ISO
9761
Aerospace - Locking Clips, in Corrosion-Resistant Steel, for Aircraft Control Wire Rope Turnbuckles - Dimensions First Edition
ISO
9762
Aerospace - Aircraft Control Wire Rope Assemblies - Dimensions and End-Fitting Combinations First Edition
ISO
9763
Aerospace - Aircraft Control Wire Rope Assemblies - Technical Specification First Edition
Electric Resistance and Induction Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing of the Weld Seam for the
ISO
9764
Detection of Longitudinal Imperfections First Edition
Submerged Arc-Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing of the Weld Seam for the Detection of Longitudinal
ISO
9765
and/or Transverse Imperfections First Edition
ISO
9766
Drills with Indexable Inserts - Cylindrical Shanks with a Parallel Flat First Edition
ISO
9768
Tea - Determination of Water Extract Second Edition; Technical Corrigendum 1-1998
Crude Petroleum and Petroleum Products - Compressibility Factors for Hydrocarbons in the Range 638 kg/m3 to 1 074 kg/m3 First
ISO
9770
Edition; (Corrected and Reprinted -1989)
Plastics - Phenolic Resins - Determination of the Pseudo-Adiabatic Temperature Rise of Liquid Resols When Cured Under Acid
ISO
9771
Conditions Second Edition
Cellular Plastics - Determination of Horizontal Burning Characteristics of Small Specimens Subjected to a Small Flame Second
ISO
9772
Edition; Amendment 1: 9/15/2003
Plastics - Determination of Burning Behaviour of Thin Flexible Vertical Specimens in Contact with a Small-Flame Ignition Source
ISO
9773
Second Edition; Amendment 1: 09/15/2003
ISO
9774
Thermal insulation for building applications Guidelines for selecting properties First Edition; Replaces TR 9774:1990
ISO
9775
Small Craft - Remote Steering Systems for Single Outboard Motors of 15 kW to 40 kW Power First Edition (CEN EN 29775: 1993)
Oil of Mentha Arvensis, Partially Dementholized (Mentha Arvensis L. Var. Piperascens Malinv. and Var. Glabrata Holmes) First
ISO
9776
Edition
Metallurgical-Grade Fluorspar - Determination of Lead Content - Solvent Extraction Atomic Absorption Spectrometric Method Second
ISO
9779
Edition
ISO
9782
Plastics - Reinforced Moulding Compounds and Prepregs - Determination of Apparent Volatile-Matter Content First Edition
Ships and Marine Technology - Ventilation of Cargo Spaces Where Vehicles With Internal Combustion Engines are Driven -
ISO
9785
Calculation of Theoretical Total Airflow Required Second Edition
ISO
9787
Manipulating Industrial Robots - Coordinate Systems and Motion Nomenclatures Second Edition
Air Cargo Equipment - Cast Components of Double Stud Fitting Assembly with a Load Capacity of 22 250 N (5 000 lbf), for Aircraft
ISO
9788
Cargo Restraint First Edition
Information Technology - Security Techniques - Digital Signature Schemes Giving Message Recovery - Part 2: Integer Factorization
ISO
9796-2
Based Mechanisms Second Edition
Information technology Security techniques Digital signature schemes giving message recovery Part 3: Discrete logarithm based
ISO
9796-3
mechanisms Second Edition
Information Technology - Security Techniques - Message Authentication Codes (MACs) - Part 1: Mechanisms Using a Block Cipher
ISO
9797-1
First Edition; Replaces ISO 9797
Information Technology - Security Techniques - Message Authentication Codes (MACs) - Part 2: Mechanisms Using a Dedicated
ISO
9797-2
Hash-Function First Edition; Replaces ISO 9797
ISO
9798-1
Information Technology - Security Techniques - Entity Authentication - Part 1: General Second Edition
Information Technology - Security Techniques - Entity Authentication - Part 2: Mechanisms Using Symmetric Encipherment
ISO
9798-2
Algorithms Second Edition; Corrigendum 1: 02/01/2004
Information Technology - Security Techniques - Entity Authentication - Part 3: Mechanisms Using Digital Signature Techniques
ISO
9798-3
Second Edition
Information Technology - Security Techniques - Entity Authentication - Part 4: Mechanisms Using a Cryptographic Check Function
ISO
9798-4
Second Edition
Information Technology - Security Techniques - Entity Authentication - Part 5: Mechanisms Using Zero-Knowledge Techniques
ISO
9798-5
Second Edition
ISO
9798-6
Information technology - Security techniques - Entity authentication - Part 6: Mechanisms using manual data transfer First Edition
ISO
9801
Ophthalmic Instruments - Trial Case Lenses First Edition
ISO
9802
Raw Optical Glass - Vocabulary First Edition
Vacuum technology ù Mounting dimensions of pipeline fittings ù Part 1: Non knife-edge flange type FIRST EDITION [Replaced: ISO
ISO
9803-1
9803]
ISO
9803-2
Vacuum technology ù Mounting dimensions of pipeline fittings ù Part 2: Knife-edge flange type FIRST EDITION [Replaced: ISO 9803]
Information Technology - Open Systems Interconnection - Service Definition for the Commitment, Concurrency and Recovery Service
ISO
9804
Element Third Edition
Information Technology - Open Systems Interconnection - Protocol for the Commitment, Concurrency and Recovery Service
ISO
9805-1
Element: Protocol Specification Third Edition
Information Technology - Open Systems Interconnection - Protocol for the Commitment, Concurrency and Recovery Service
ISO
9805-2
Element: Protocol Implementation Conformance Statement (PICS) Proforma First Edition
Test Methods for Solar Collectors - Part 1: Thermal Performance of Glazed Liquid Heating Collectors Including Pressure Drop First
ISO
9806-1
Edition
ISO
9806-2
Test Methods for Solar Collectors - Part 2: Qualification Test Procedures First Edition
Test Methods for Solar Collectors - Part 3: Thermal Performance of Unglazed Liquid Heating Collectors (Sensible Heat Transfer
ISO
9806-3
Only) Including Pressure Drop First Edition
ISO
9808
Solar Water Heaters - Elastomeric Materials for Absorbers, Connecting Pipes and Fittings - Method of Assessment First Edition
Gas Cylinders - Refillable Seamless Steel Gas Cylinders - Design, Construction and Testing - Part 1: Quenched and Tempered Steel
ISO
9809-1
Cylinders with Tensile Strength Less Than 1 100 MPa First Edition
Gas Cylinders - Refillable Seamless Steel Gas Cylinders - Design, Construction and Testing Part 2: Quenched and Tempered Steel
ISO
9809-2
Cylinders with Tensile Strength Greater Than or Equal to 1 100 MPa First Edition
Gas Cylinders - Refillable Seamless Steel Gas Cylinders - Design, Construction and Testing - Part 3: Normalized Steel Cylinders
ISO
9809-3
First Edition; Together with ISO 9809-1 and ISO 9809-2, Cancels and Replaces ISO 4705:1983
ISO
9815
Road Vehicles - Passenger-Car and Trailer Combinations - Lateral Stability Test Second Edition
ISO
9816
Passenger cars Power-off reaction of a vehicle in a turn Open-loop test method Second Edition
ISO
9817
Passenger Cars - Engine Cooling Systems - Dimensions of Pressure Caps and Their Ramp Seats on Filler Necks First Edition
ISO
9818
Passenger Cars - Engine Cooling Systems - Test Methods and Marking of Pressure Caps First Edition
ISO
9825
Hydrometry Field measurement of discharge in large rivers and rivers in flood Second edition
ISO
9826
Measurement of Liquid Flow in Open Channels - Parshall and SANIIRI Flumes First Edition
ISO
9827
Measurement of Liquid Flow in Open Channels by Weirs and Flumes - Streamlined Triangular Profile Weirs First Edition
Animal Feeding Stuffs, Animal Products, and Faeces or Urine - Determination of Gross Calorific Value - Bomb Calorimeter Method
ISO
9831
First Edition
ISO
9832
Animal and Vegetable Fats and Oils - Determination of Residual Technical Hexane Content Second Edition
ISO
9833
Melons - Cold Storage and Refrigerated Transport First Edition
Information technology - Open Systems Interconnection - Procedures for the operation of OSI Registration Authorities: General
ISO
9834-1
procedures and top arcs of the ASN.1 Object Identifier tree Second Edition
Information Technology - Open Systems Interconnection - Procedures for the Operation of OSI Registration Authorities: - Part 2:
ISO
9834-2
Registration Procedures for OSI Document Types First Edition; AS/NZS 4153.2: 1994
Information technology Open Systems Interconnection Procedures for the operation of OSI Registration Authorities: Registration of
ISO
9834-3
Object Identifier arcs beneath the top-level arc jointly administered by ISO and ITU-T Third edition
Information Technology - Open Systems Interconnection - Procedures for the Operation of OSI Registration Authorities - Part 4:
ISO
9834-4
Register of VTE Profiles First Edition
Information Technology - Open Systems Interconnection - Procedures for the Operation of OSI Registration Authorities - Part 5:
ISO
9834-5
Register of VT Control Object Definitions First Edition (AS/NZS 4153.5: 1993)
Information Technology - Open Systems Interconnection - Procedures for the operation of OSI Registration Authorities: Registration
ISO
9834-6
of application processes and application entities Second edition
Information technology Open Systems Interconnection Procedures for the operation of OSI Registration Authorities: Joint ISO and
ISO
9834-7
ITU-T Registration of International Organizations Second edition
Information technology Open Systems Interconnection Procedures for the operation of OSI Registration Authorities: Joint ISO and
ISO
9834-8
ITU-T Registration of International Organizations First edition
ISO
9835
Ambient Air - Determination of a Black Smoke Index First Edition
ISO
9836
Performance Standards in Building - Definition and Calculation of Area and Space Indicators First Edition
ISO
9838
Alpine Ski-Bindings - Test Soles for Ski- Binding Tests First Edition
ISO
9841
Oil of Hyssop (Hyssopus Officinalis Linnaeus) First Edition
ISO
9842
Oil of Rose (Rosa x Damascena Miller) Second Edition
ISO
9843
Oil of Cedarwood, Chinese Type (Cupressus Funebris Endlicher) Second Edition
ISO
9844
Oil of bitter orange (Citrus aurantium L.) Second Edition
Solar Energy - Reference Solar Spectral Irradiance at the Ground at Different Receiving Conditions - Part 1: Direct Normal and
ISO
9845-1
Hemispherical Solar Irradiance for Air Mass 1,5 First Edition
ISO
9846
Solar Energy - Calibration of a Pyranometer Using a Pyrheliometer First Edition
ISO
9847
Solar Energy - Calibration of Field Pyranometers by Comparison to a Reference Pyranometer First Edition
ISO
9848
Photography Source document microfilms Determination of ISO speed and ISO average gradient Second Edition
Optics and Optical Instruments - Geodetic and Surveying Instruments - Vocabulary Optique Et Instruments D'Optique - Instruments
ISO
9849
Geodesiques Et D'Observation - Vocabulaire Second Edition
ISO
9851
Continuous Mechanical Handling Equipment - Overhead Electrical Monorail Conveyors - Definitions and Safety Rules First Edition
Unplasticized poly(vinyl chloride) (PVC-U) pipes ù Dichloromethane resistance at specified temperature (DCMT) ù Test method
ISO
9852
Second Edition
ISO
9853
Injection-Moulded Unplasticized Poly(Vinyl Chloride) (PVC-U) Fittings for Pressure Pipe Systems - Crushing Test First Edition
Thermoplastics Pipes for the Transport of Fluids - Determination of Pendulum Impact Strength by the Charpy Method - Part 1:
ISO
9854-1
General Test Method First Edition
Thermoplastics Pipes for the Transport of Fluids - Determination of Pendulum Impact Strength by the Charpy Method - Part 2: Test
ISO
9854-2
Conditions for Pipes of Various Materials First Edition
Ambient Air - Determination of the Particulate Lead Content of Aerosols Collected on Filters - Atomic Absorption Spectrometric
ISO
9855
Method First Edition
ISO
9856
Conveyor belts Determination of elastic and permanent elongation and calculation of elastic modulus Second Edition
ISO
9862
Geosynthetics Sampling and preparation of test specimens Second edition
Geosynthetics Determination of thickness at specified pressures Part 1: Single layers First edition; Cancels and replaces ISO
ISO
9863-1
9863:1990
Geotextiles and Geotextile-Related Products - Determination of Thickness at Specified Pressures - Part 2: Procedure for
ISO
9863-2
Determination of Thickness of Single Layers of Multilayer Products First Edition CEN EN ISO 9863-2: 1996
ISO
9864
Geosynthetics Test method for the determination of mass per unit area of geotextiles and geotextile-related products Second edition
Textiles - Determination of Water Repellency of Fabrics by the Bundesmann Rain-Shower Test First Edition; (Corrected and
ISO
9865
Reprinted -1992) (CEN EN 29865: 1993)
ISO
9866-1
Textiles - Effect of Dry Heat on Fabrics Under Low Pressure - Part 1: Procedure for Dry-Heat Treatment of Fabrics First Edition
Textiles - Effect of Dry Heat on Fabrics Under Low Pressure - Part 2: Determination of Dimensional Change in Fabrics Exposed to
ISO
9866-2
Dry Heat First Edition
ISO
9867
Textiles - Evaluation of the Wrinkle Recovery of Fabrics - Appearance Method First Edition
ISO
9869
Thermal Insulation - Building Elements - In-Situ Measurements of Thermal Resistance and Thermal Transmittance First Edition
ISO
9873
Dental Hand Instruments - Reusable Mirrors and Handles Second Edition; Corrigendum 1: 06-15-2000
ISO
9874
Milk Determination of total phosphorus content Method using molecular absorption spectrometry Second Edition
ISO
9875
Ships and marine technology Marine echo-sounding equipment Third Edition; Technical Corrigendum 1: 02/15/2006
ISO
9876
Ships and Marine Technology - Marine Facsimile Receivers for Meteorological Charts Second Edition
ISO
9878
Micrographics - Graphical Symbols for Use in Microfilming First Edition
Performance Standards in Building - Performance Test for Precast Concrete Floors - Behaviour Under Non-Concentrated Load First
ISO
9882
Edition
Performance Standards in Building - Performance Test for Precast Concrete Floors - Behaviour Under Concentrated Load First
ISO
9883
Edition
ISO
9884-1
Tea Sacks - Specification - Part 1: Reference Sack for Palletized and Containerized Transport of Tea First Edition
Tea Sacks - Specification - Part 2: Performance Specification for Sacks for Palletized and Containerized Transport of Tea First
ISO
9884-2
Edition
ISO
9885
Wide-Mouth Glass Containers - Deviation from Flatness of Top Sealing Surface - Test Methods First Edition (CEN EN 29885: 1994)
ISO
9886
Ergonomics Evaluation of thermal strain by physiological measurements Second Edition
Water Quality - Evaluation of the Aerobic Biodegradability of Organic Compounds in an Aqueous Medium - Semi-Continuous
ISO
9887
Activated Sludge Method (SCAS) First Edition; (CEN EN ISO 9887:1994)
Water Quality - Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium - Static Test (Zahn-
ISO
9888
Wellens Method) Second Edition
Determination of Carbon Content in Uranium Dioxide Powder and Sintered Pellets - Resistance Furnace Combustion - Titrimetric
ISO
9889
/Coulometric/Infrared Absorption Method First Edition
Determination of Carbon Content in Uranium Dioxide Powder and Sintered Pellets - High-Frequency Induction Furnace Combustion -
ISO
9891
Titrimetric/Coulometric/ Infrared Absorption Methods First Edition
Uranium Metal, Uranium Dioxide Powder and Pellets, and Uranyl Nitrate Solutions - Determination of Fluorine Content - Fluoride Ion
ISO
9892
Selective Electrode Method First Edition
ISO
9894
Subsampling of Uranium Hexafluoride in the Liquid Phase First Edition
ISO
9895
Paper and Board - Compressive Strength - Short Span Test First Edition
ISO
9896
Plastics Traps for Discharge Pipework Systems Inside Buildings First Edition
Freight Containers - Container Equipment Data Exchange (CEDEX) - General Communication Codes First Edition; Technical
ISO
9897
Corrigendum 1 - 06/15/2001
ISO
9898
Equipment for Crop Protection - Test Methods for Air-Assisted Sprayers for Bush and Tree Crops First Edition
ISO
9899
Programming Languages - C Second Edition; Technical Corrigendum 1: 09/01/2001; Technical Corrigendum 2: 11/15/2004
Textile Machinery - Noise Test Code - Part 1: Common Requirements First Edition; Together with ISO 9902-2, ISO 9902-3, ISO 9902-
ISO
9902-1
4, ISO 9902-5, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993
Textile Machinery - Noise Test Code - Part 2: Spinning Preparatory and Spinning Machinery First Edition; Together with ISO 9902-1,
ISO
9902-2
ISO 9902-3, ISO 9902-4, ISO 9902-5, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993
Textile Machinery - Noise Test Code - Part 3: Nonwoven Machinery First Edition; Together with ISO 9902-1, ISO 9902-2, ISO 9902-4,
ISO
9902-3
ISO 9902-5, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993
Textile Machinery - Noise Test Code - Part 4: Yarn Processing, Cordage and Rope Manufacturing Machinery First Edition; Together
ISO
9902-4
with ISO 9902-1, ISO 9902-2, ISO 9902-3, ISO 9902-5, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993
Textile Machinery - Noise Test Code - Part 5: Weaving and Knitting Preparatory Machinery First Edition; Together with ISO 9902-1,
ISO
9902-5
ISO 9902-2, ISO 9902-3, ISO 9902-4, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993
Textile Machinery - Noise Test Code - Part 6: Fabric Manufacturing Machinery First Edition; Together with ISO 9902-1, ISO 9902-2,
ISO
9902-6
ISO 9902-3, ISO 9902-4, ISO 9902-5 and ISO 9902-7 Cancels and Replaces 9902: 1993
Textile Machinery - Noise Test Code - Part 7: Dyeing and Finishing Machinery First Edition; Together with ISO 9902-1, ISO 9902-2,
ISO
9902-7
ISO 9902-3, ISO 9902-4, ISO 9902-5 and ISO 9902-6 Cancels and Replaces 9902: 1993
Textile Machinery and Accessories - Main Dimensions for Section Wires for Metallic Card Clothing - Part 1: Foot Without Interlocking
ISO
9903-1
or Interchaining First Edition; Replaces ISO 9903
Textile Machinery and Accessories - Main Dimensions for Section Wires for Metallic Card Clothing - Part 2: Foot with Interchaining
ISO
9903-2
First Edition; Replaces ISO 9903
ISO
9904
Textile Machinery and Accessories - Steel Pins for Spinning Preparatory and Spinning Machinery Second Edition
ISO
9905
Technical specifications for centrifugal pumps - Class I First Edition; Corrigendum 1:2005
ISO
9906
Rotodynamic Pumps - Hydraulic Performance Acceptance Tests - Grades 1 and 2 First Edition
ISO
9908
Technical Specifications for Centrifugal Pumps - Class III First Edition
ISO
9909
Oil of Dalmatian Sage (Salvia Officinalis L.) First Edition
ISO
9910
Oil of Sweet Orange - Determination of the Total Carotenoids Content First Edition
ISO
9911
Agricultural irrigation equipment Manually operated small plastics valves Second Edition
ISO
9912-1
Agricultural irrigation equipment Filters for micro-irrigation Part 1: Terms, definitions and classification First Edition
ISO
9912-2
Agricultural Irrigation Equipment - Filters - Part 2: Strainer-Type Filters First Edition
ISO
9912-3
Agricultural Irrigation Equipment - Filters - Part 3: Automatic Self- Cleaning Strainer-Type Filters First Edition
ISO
9915
Aluminium Alloy Castings - Radiography Testing First Edition
ISO
9916
Aluminium Alloy and Magnesium Alloy Castings - Liquid Penetrant Inspection First Edition
ISO
9917-1
Dentistry Water-based cements Part 1: Powder/liquid acid-base cements First Edition
ISO
9917-2
Dental Water-Based Cements - Part 2: Light-Activated Cements First Edition
Medical electrical equipment Particular requirements for the basic safety and essential performance of pulse oximeter equipment for
ISO
9919
medical use Second edition
Ergonomics of the thermal environment ù Estimation of thermal insulation and water vapour resistance of a clothing ensemble
ISO
9920
Second Edition
ISO
9921
Ergonomics Assessment of speech communication First Edition
ISO
9923
Micrographics - Transparent A6 Microfiche - Image Arrangements First Edition
Rubber and Rubber Products - Determination of the Composition of Vulcanizates and Uncured Compounds by Thermogravimetry -
Part 1: Butadiene, Ethylene-Propylene Copolymer and Terpolymer, Isobutene-Isoprene, Isoprene and Styrene-Butadiene Rubbers
ISO
9924-1
Second Edition
Rubber and Rubber Products - Determination of the Composition of Vulcanizates and Uncured Compounds by Thermogravimetry -
ISO
9924-2
Part 2: Acrylonitrile-Butadiene and Halobutyl Rubbers First Edition
ISO
9926-1
Cranes - Training of Drivers - Part 1: General First Edition
ISO
9926-3
Cranes Training of drivers Part 3: Tower cranes First Edition
ISO
9927-1
Cranes - Inspections - Part 1: General First Edition
ISO
9927-3
Cranes Inspections Part 3: Tower cranes First Edition
ISO
9928-1
Cranes - Crane Driving Manual - Part 1: General First Edition
ISO
9928-2
Cranes ù Crane driving manual ù Part 2: Mobile crane operators First Edition
ISO
9930
Green Beans - Storage and Refrigerated Transport First Edition
ISO
9931
Coal - Sampling of Pulverized Coal Conveyed by Gases in Direct Fired Coal Systems First Edition
Paper and Board - Determination of Water Vapour Transmission Rate of Sheet Materials - Dynamic Sweep and Static Gas Methods
ISO
9932
First Edition
Products in fibre-reinforced cement Long corrugated or asymmetrical section sheets and fittings for roofing and cladding First
ISO
9933
Edition; Technical Corrigendum 1: 6/1/1999; Amendment 1: 9/15/2004; Technical Corrigendum 2: 5/15/2005
ISO
9934-1
Non-Destructive Testing - Magnetic Particle Testing - Part 1: General Principles First Edition
ISO
9934-2
Non-Destructive Testing - Magnetic Particle Testing - Part 2: Detection Media First Edition
ISO
9934-3
Non-Destructive Testing - Magnetic Particle Testing - Part 3: Equipment First Edition
ISO
9935
Non-Destructive Testing - Penetrant Flaw Detectors - General Technical Requirements First Edition
Animal and vegetable fats and oils Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography
ISO
9936
Second Edition
Aerospace - Polytetrafluoroethylene (PTFE) Hose Assemblies, Classification 204 Degrees Celsius/28 000 kPa - Procurement
ISO
9938
Specification Second Edition
ISO
9939
Aerospace - Pressure Re-Oiling Connection (New Type) First Edition
ISO
9942-1
Cranes - Information Labels - Part 1: General First Edition
ISO
9942-3
Cranes - Information Labels - Part 3: Tower Cranes First Edition
ISO
9943
Shipbuilding - Ventilation and Air- Treatment of Galleys and Pantries with Cooking Appliances First Edition
ISO
9944
Plastics - Phenolic Resins - Determination of Electrical Conductivity of Resin Extracts First Edition; Corrigendum 1-1997
Information technology ù Portable Operating System Interface (POSIX«) ù Part 1: Base Definitions TECHNICAL CORRIGENDUM 1
ISO
9945-1 CORR 1
Fourth Edition
ISO
9945-1
Information technology ù Portable Operating System Interface (POSIX«) ù Part 1: Base Definitions Fourth Edition; IEEE 1003.1
Information technology ù Portable Operating System Interface (POSIX«) ù Part 2: System Interfaces TECHNICAL CORRIGENDUM 1
ISO
9945-2 CORR 1
Third Edition
Information technology ù Portable Operating System Interface (POSIX«) ù Part 2: System Interfaces Third Edition; IEEE Std
ISO
9945-2
1003.1:2003
Information technology ù Portable Operating System Interface (POSIX«) ù Part 3: Shell and Utilities TECHNICAL CORRIGENDUM 1
ISO
9945-3 CORR 1
Second Edition
ISO
9945-3
Information technology ù Portable Operating System Interface (POSIX«) ù Part 3: Shell and Utilities Second Edition
Information technology ù Portable Operating System Interface (POSIX«) ù Part 4: Rationale TECHNICAL CORRIGENDUM 1 Second
ISO
9945-4 CORR 1
Edition
ISO
9945-4
Information technology ù Portable Operating System Interface (POSIX«) ù Part 4: Rationale Second Edition; IEEE Std 1003.1
ISO
9946
Manipulating Industrial Robots - Presentation of Characteristics Second Edition
Textile Machinery and Accessories - Two-for- One Twisters - Vocabulary MatÚriel pour l industrie textile Retordeuses Ó broches
ISO
9947
double torsion Vocabulaire Second Edition
ISO
9949-1
Urine Absorbing Aids - Vocabulary - Part 1: Conditions of Urinary Incontinence First Edition
ISO
9949-2
Urine Absorbing Aids - Vocabulary - Part 2: Products First Edition
ISO
9949-3
Urine Absorbing Aids - Vocabulary - Part 3: Identification of Product Types First Edition
ISO
9950
Industrial Quenching Oils - Determination of Cooling Characteristics - Nickel -Alloy Probe Test Method First Edition
ISO
9951
Measurement of Gas Flow in Closed Conduits - Turbine Meters First Edition; Corrigendum 1: 1994
ISO
9957-1
Fluid Draughting Media - Part 1: Water-Based India Ink - Requirements and Test Conditions First Edition
ISO
9957-2
Fluid Draughting Media - Part 2: Water-Based Non- India Ink - Requirements and Test Conditions First Edition
ISO
9957-3
Fluid Draughting Media - Part 3: Water-Based Coloured Draughting Inks - Requirements and Test Conditions First Edition
ISO
9958-1
Draughting Media for Technical Drawings - Draughting Film with Polyester Base - Part 1: Requirements and Marking First Edition
ISO
9958-2
Draughting Media for Technical Drawings - Draughting Film with Polyester Base - Part 2: Determination of Properties First Edition
ISO
9959-1
Numerically Controlled Draughting Machines - Drawing Test for the Evaluation of Performance - Part 1: Vector Plotters First Edition
ISO
9960-1
Draughting Instruments with or Without Graduation - Part 1: Draughting Scale Rules First Edition
ISO
9960-2
Draughting Instruments with or Without Graduation - Part 2: Protractors First Edition
ISO
9961
Draughting Media for Technical Drawings - Natural Tracing Paper First Edition
ISO
9962-1
Manually Operated Draughting Machines - Part 1: Definitions, Classification and Designation First Edition
ISO
9962-2
Manually Operated Draughting Machines - Part 2: Characteristics, Performance, Inspection and Marking First Edition
Water Quality - Determination of Alkalinity - Part 1: Determination of Total and Composite Alkalinity First Edition (CEN EN ISO 9963-
ISO
9963-1
1: 1995)
ISO
9963-2
Water Quality - Determination of Alkalinity - Part 2: Determination of Carbonate Alkalinity First Edition (CEN EN ISO 9963-2: 1995)
Water Quality - Determination of Sodium and Potassium - Part 1: Determination of Sodium by Atomic Absorption Spectrometry First
ISO
9964-1
Edition
Water Quality - Determination of Sodium and Potassium - Part 2: Determination of Potassium by Atomic Absorption Spectrometry
ISO
9964-2
First Edition
Water Quality - Determination of Sodium and Potassium - Part 3: Determination of Sodium and Potassium by Flame Emission
ISO
9964-3
Spectrometry First Edition
ISO
9965
Water Quality - Determination of Selenium - Atomic Absorption Spectrometric Method (Hydride Technique) First Edition
ISO
9967
Thermoplastics Pipes - Determination of Creep Ratio First Edition; (CEN EN ISO 9967: 1995)
ISO
9969
Thermoplastics Pipes - Determination of Ring Stiffness First Edition; (CEN EN ISO 9969: 1995)
ISO
9972
Thermal performance of buildings Determination of air permeability of buildings Fan pressurization method Second Edition
Information technology Computer graphics, image processing and environmental data representation Procedures for registration of
ISO
9973
items Second Edition
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal- to-Metal
ISO
9974-1
Sealing - Part 1: Threaded Ports First Edition
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal- to-Metal
ISO
9974-2
Sealing - Part 2: Stud Ends with Elastomeric Sealing (Type E) First Edition
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal- to-Metal
ISO
9974-3
Sealing - Part 3: Stud Ends with Metal-to-Metal Sealing (Type B) First Edition
Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing
ISO
9974-4
Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
ISO
9975
Round Non-Alloy Steel Wires for Locked Coil Mine Winding Ropes - Specifications First Edition
ISO
9978
Radiation Protection - Sealed Radioactive Sources - Leakage Test Methods First Edition
ISO
9980
Belt Drives - Grooved Pulleys for V-Belts (System Based on Effective Width) - Geometrical Inspection of Grooves First Edition
ISO
9981
Belt Drives - Pulleys and V-Ribbed Belts for the Automotive Industry - PK Profile: Dimensions Second Edition
Belt Drives - Pulleys and V-Ribbed Belts for Industrial Applications - Dimensions - PH, PJ, PK, PL and PM Profiles: Dimensions
ISO
9982
Second Edition
ISO
9983
Information Technology - Designation of Unrecorded Flexible Disk Cartridges Second Edition
ISO
9984
Information and Documentation - Transliteration of Georgian Characters into Latin Characters First Edition
ISO
9985
Information and Documentation - Transliteration of Armenian Characters into Latin Characters First Edition
ISO
9986
Composition Cork for Shoe Outsoles First Edition
ISO
9987
Motorcycles - Measurement of Variation of Dipped Beam Inclination as a Function of Load First Edition
Plastics - Polyoxymethylene (POM) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications Third
ISO
9988-1
Edition
Plastics - Polyoxymethylene (POM) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of
ISO
9988-2
Properties Third Edition
Financial Transaction Cards - Messages Between the Integrated Circuit Card and the Card Accepting Device - Part 1: Concepts and
ISO
9992-1
Structures First Edition (CEN EN 29992-1: 1993)
Financial Transaction Cards - Messages between the Integrated Circuit Card and the Card Accepting Device - Part 2: Functions,
ISO
9992-2
Messages (Commands and Responses), Data Elements and Structures First Edition; Technical Corrigendum 1: 12/15/1999
ISO
9994
Lighters - Safety Specification Fourth Edition
Information technology Keyboard layouts for text and office systems Part 1: General principles governing keyboard layouts Second
ISO
9995-1
Edition
ISO
9995-2
Information Technology - Keyboard Layouts for Text and Office Systems - Part 2: Alphanumeric Section Second Edition
Information Technology - Keyboard Layouts for Text and Office Systems - Part 3: Complementary Layouts of the Alphanumeric Zone
ISO
9995-3
of the Alphanumeric Section Second Edition
ISO
9995-4
Information Technology - Keyboard Layouts for Text and Office Systems - Part 4: Numeric Section Second Edition
ISO
9995-5
Information technology Keyboard layouts for text and office systems Part 5: Editing section Second Edition
ISO
9995-6
Information technology Keyboard layouts for text and office systems Part 6: Function section Second Edition
Information technology Keyboard layouts for text and office systems Part 7: Symbols used to represent functions Technologies de
l information Disposition des claviers con us pour la bureautique Partie 7: Symboles employÚs pour la reprÚsentation de fonctions
ISO
9995-7
Second Edition
Information technology Keyboard layouts for text and office systems Part 8: Allocation of letters to the keys of a numeric keypad
ISO
9995-8
Second Edition
ISO
9996
Mechanical Vibration and Shock - Disturbance to Human Activity and Performance - Classification First Edition
ISO
9997
Dental Cartridge Syringes Second Edition
ISO
9998
Water Quality - Practices for Evaluating and Controlling Microbiological Colony Count Media Used in Water Quality Tests First Edition
ISO
9999 CORR 1
Assistive products for persons with disability ù Classification and terminology Fourth Edition
ISO
9999
Assistive products for persons with disability ù Classification and terminology Fourth Edition
ISO
10002
Quality management Customer satisfaction Guidelines for complaints handling in organizations First Edition
ISO
10005
Quality Management Systems - Guidelines for Quality Plans Second Edition
ISO
10006
Quality management systems Guidelines for quality management in projects Second Edition
ISO
10007
Quality management systems Guidelines for configuration management Second Edition
ISO
10012
Measurement Management Systems - Requirements for Measurement Processes and Measuring Equipment First Edition
ISO
10014 CORR 1
Quality management ù Guidelines for realizing financial and economic benefits TECHNICAL CORRIGENDUM 1
ISO
10014
Quality management Guidelines for realizing financial and economic benefits First Edition;: 1998 [Replaced: ISO TR 10014]
ISO
10015
Quality Management - Guidelines for Training First Edition
ISO
10019
Guidelines for the selection of quality management system consultants and use of their services First Edition
ISO
10021-1
Information technology Message Handling Systems (MHS) Part 1: System and service overview Second Edition
ISO
10021-2
Information Technology - Message Handling Systems (MHS): Overall Architecture Third Edition
Information Technology - Message Handling Systems (MHS): Message Transfer System - Abstract Service Definition and
ISO
10021-4
Procedures Third Edition
Information Technology - Message Handling Systems (MHS): Message Store: Abstract Service Definition Fourth Edition; Incorporates
ISO
10021-5
Amendment 1: 1998 and Technical Corrigendum 1: 1998
ISO
10021-6
Information Technology - Message Handling Systems (MHS): Protocol Specifications Third Edition
ISO
10021-7
Information Technology - Message Handling Systems (MHS): Interpersonal Messaging System Third Edition
ISO
10021-8
Information technology Message Handling Systems (MHS) Part 8: Electronic Data Interchange Messaging Service Second Edition
ISO
10021-9
Information Technology - Message Handling Systems (MHS): Electronic Data Interchange Messaging System Second Edition
ISO
10021-10
Information Technology - Message Handling Systems (MHS): MHS Routing Second Edition
ISO
10022
Information Technology - Open Systems Interconnection - Physical Service Definition Second Edition
ISO
10026-1
Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 1: OSI TP Model Second Edition
ISO
10026-2
Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 2: OSI TP Service Third Edition
Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 3: Protocol Specification Third
ISO
10026-3
Edition
Information Technology - Open Systems Interconnection - Distributed Transaction Processing: Protocol Implementation
ISO
10026-4
Conformance Statement (PICS) Proforma First Edition
Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 5: Application Context Proforma
ISO
10026-5
and Guidelines When Using OSI TP First Edition
Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 6: Unstructured Data Transfer
ISO
10026-6
First Edition
ISO
10027
Information Technology - Information Resource Dictionary System (IRDS) Framework First Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Definition of the Relaying Functions of
ISO
10028
a Network Layer Intermediate System First Edition (AS/NZS 4209: 1994)
Information Technology - Telecommunications and Information Exchange Between Systems - End System Routeing Information
ISO
10030
Exchange Protocol for Use in Conjunction with ISO/IEC 8878 Second Edition
Information Technology - Open Systems Interconnection - Connectionless Protocol for the Association Control Service Element:
ISO
10035-1
Protocol Specification Second Edition; Supersedes ISO 10035; Amendment 1: 12/15/1997; Corrigendum 1:12/15/1999
Information Technology - Open Systems Interconnection - Connectionless Protocol for the Association Control Service Element:
ISO
10035-2
Protocol Implementation Conformance Statement (PICS) Proforma First Edition
Information technology - Font information interchange - Procedures for registration of font-related identifiers Second Edition;
ISO
10036
Corrigendum 1: 03-01-2001; Corrigendum 2: 12-01-2002
ISO
10040
Information Technology - Open Systems Interconnection - Systems Management Overview Second Edition
Welding ù Arc-welded joints in aluminium and its alloys ù Quality levels for imperfections TECHNICAL CORRIGENDUM 1 Second
ISO
10042 CORR 1
Edition
ISO
10042
Welding ù Arc-welded joints in aluminium and its alloys ù Quality levels for imperfections Second Edition
Banking and Related Financial Services - Information Interchange - Collection Order Form First Edition; Technical Corrigendum 1:
ISO
10043
12/15/1999
Banking and Related Financial Services - Information Interchange - Documentary Credit Form First Edition; Technical Corrigendum
ISO
10044
1: 12/15/1999
ISO
10045
Alpine Skis - Binding Mounting Area - Requirements for Test Screws First Edition
ISO
10046
Aircraft - Methodology of Calculating Cargo Compartment Volumes First Edition
ISO
10047
Textiles - Determination of Surface Burning Time of Fabrics First Edition; (CAN/CGSB-4.2 NO.27.11-94)
ISO
10049
Aluminium Alloy Castings - Visual Method for Assessing the Porosity First Edition
Lubricants, industrial oils and related products (class L) Family T (Turbines) Specifications of triaryl phosphate ester turbine control
ISO
10050
fluids (category ISO-L-TCD) First Edition
ISO
10051
Thermal Insulation - Moisture Effects on Heat Transfer - Determination of Thermal Transmissivity of a Moist Material First Edition
ISO
10052
Acoustics Field measurements of airborne and impact sound insulation and of service equipment sound Survey method First Edition
ISO
10053
Acoustics - Measurement of Office Screen Sound Attenuation Under Specific Laboratory Conditions First Edition
Internal Combustion Compression-Ignition Engines - Measurement Apparatus for Smoke from Engines Operating Under Steady-
ISO
10054
State Conditions - Filter-Type Smokemeter First Edition
ISO
10055
Mechanical Vibration - Vibration Testing Requirements for Shipboard Equipment and Machinery Components First Edition
Mechanical Vibration - Measurement and Analysis of Whole-Body Vibration to Which Passengers and Crew are Exposed in Railway
ISO
10056
Vehicles First Edition
ISO
10058
Magnesites and Dolomites - Chemical Analysis First Edition (CEN EN ISO 10058: 1996)
Dense, Shaped Refractory Products - Determination of Cold Compressive Strength - Part 1: Referee Test Without Packing First
ISO
10059-1
Edition
ISO
10059-2
Dense, shaped refractory products - Determination of cold compressive strength - Part 2: Test with packing First Edition
ISO
10060
Dense, Shaped Refractory Products - Test Methods for Products Containing Carbon First Edition
ISO
10062
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) Second Edition
ISO
10066
Flexible Cellular Polymeric Materials - Determination of Creep in Compression First Edition
ISO
10068
Mechanical Vibration and Shock - Free, Mechanical Impedance of the Human Hand-Arm System at the Driving Point First Edition
ISO
10069 PT 1
Tools for Pressing - Elastomer Pressure Springs - Part 1: General Specification First Edition
ISO
10069 PT 2
Tools for Pressing - Elastomer Pressure Springs - Part 2: Specification of Accessories First Edition
Metallic Powders - Determination of Envelope-Specific Surface Area from Measurements of the Permeability to Air of a Powder Bed
ISO
10070
Under Steady- State Flow Conditions First Edition
ISO
10071-1
Tools for Pressing - Ball-Lock Punches - Part 1: Ball-Lock Punches for Light Duty First Edition
ISO
10071-2
Tools for Pressing - Ball-Lock Punches - Part 2: Ball-lock punches for heavy duty First Edition
ISO
10072
Tools for moulding Sprue bushes Dimensions Second Edition
ISO
10073
Tools for Moulding - Support Pillars First Edition
ISO
10074
Specification for Hard Anodic Oxidation Coatings on Aluminium and its Alloys First Edition
ISO
10075
Ergonomic Principles Related to Mental Work- Load - General Terms and Definitions First Edition
ISO
10075-2
Ergonomic Principles Related to Mental Workload - Part 2: Design Principles First Edition
Ergonomic principles related to mental workload Part 3: Principles and requirements concerning methods for measuring and
ISO
10075-3
assessing mental workload First Edition
Metallic Powders - Determination of Particle Size Distribution by Gravitational Sedimentation in a Liquid and Attenuation
ISO
10076
Measurement First Edition
ISO
10077-1
Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 1: General Second Edition
Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 2: Numerical method for frames
ISO
10077-2
First Edition
ISO
10079-1
Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements Second Edition
ISO
10079-2
Medical Suction Equipment - Part 2: Manually Powered Suction Equipment Second Edition
Medical Suction Equipment - Part 3: Suction Equipment Powered from Vacuum or Pressure Source Second Edition; Replaces ASTM
ISO
10079-3
F 960 [Superseded: ASTM F 960]
ISO
10080
Refractory Products - Classification of Dense, Shaped Acid-Resisting Products First Edition
ISO
10081-1
Classification of dense shaped refractory products Part 1: Alumina-silica Second Edition; Replaces ISO 1109
ISO
10081-2
Classification of dense shaped refractory products Part 2: Basic products containing less than 7 % residual carbon First Edition
ISO
10081-3
Classification of dense shaped refractory products Part 3: Basic products containing from 7 % to 50 % residual carbon First Edition
ISO
10081-4
Classification of dense shaped refractory products ù Part 4: Special products First Edition
ISO
10082
Plastics - Phenolic Resins - Classification and Test Methods Second Edition
ISO
10083
Oxygen concentrator supply systems for use with medical gas pipeline systems Second Edition
ISO
10084
Solid Fertilizers - Determination of Mineral -Acid-Soluble Sulfate Content - Gravimetric Method First Edition
ISO
10086-1
Coal - Methods for Evaluating Flocculants for Use in Coal Preparation - Part 1: Basic Parameters First Edition
Coal Methods for evaluating flocculants for use in coal preparation Part 2: Flocculants as filter aids in rotary vacuum filtration
ISO
10086-2
systems First Edition
ISO
10087
Small craft - Craft identification - Coding system Third Edition
ISO
10088
Small Craft - Permanently Installed Fuel Systems and Fixed Fuel Tanks Second Edition
ISO
10089
Information Technology - 130 mm Rewritable Optical Disk Cartridge for Information Interchange First Edition
ISO
10090
Information Technology - 90 mm Optical Disk Cartridges, Rewritable and Read Only, for Data Interchange First Edition
ISO
10093
Plastics - Fire Tests - Standard Ignition Sources Second Edition
ISO
10095
Coffee - Determination of Caffeine Content - Method Using High- Performance Liquid Chromatography First Edition
Aerospace - Nuts, Hexagonal, Slotted (Castellated), Red. Ht, Red. Across Flats, with MJ Threads, Cls: 450MPa (at Ambt T)/425 Dgs
C, 600MPa (at Ambt T)/235 Dgs. C, 600MPa (at Ambt T)/315 Dgs. C, 600 MPa (at Ambt T)/650 Dgs. C, 900 MPa (at Ambt T)/235
ISO
10096
Dgs. C, 900MPa (at Ambt T)/730 Dgs. C, and 1100MPa (at Ambt T)/600 Dgs C - Dims. First Edition
ISO
10097-1
Wireline Diamond Core Drilling Equipment - System A - Part 1: Metric Units First Edition
ISO
10097-2
Wireline Diamond Core Drilling Equipment - System A - Part 2: Inch Units First Edition
ISO
10098
Wireline Diamond Core Drilling Equipment - System CSSK First Edition
ISO
10099
Pneumatic Fluid Power - Cylinders - Final Examination and Acceptance Criteria Second Edition
ISO
10100
Hydraulic Fluid Power - Cylinders - Acceptance Test Second Edition
ISO
10101-1
Natural Gas - Determination of Water by the Karl Fischer Method - Part 1: Introduction First Edition; (Corrected and Reprinted 1995)
ISO
10101-2
Natural Gas - Determination of Water by the Karl Fischer Method - Part 2: Titration Procedure First Edition
ISO
10101-3
Natural Gas - Determination of Water by the Karl Fischer Method - Part 3: Coulometric Procedure First Edition
Assembly Tools for Screws and Nuts - Double-Headed Open-Ended Engineers Wrenches - Length of Wrenches and Thickness of
ISO
10102
the Heads Second Edition
Assembly Tools for Screws and Nuts - Double-Headed, Flat and Offset, Box Wrenches - Length of Wrenches and Thickness of the
ISO
10103
Heads Second Edition
Assembly Tools for Screws and Nuts - Double-Headed, Deep Offset and Modified Offset, Box Wrenches - Length of Wrenches and
ISO
10104
Thickness of the Heads Second Edition
ISO
10106
Cork Stoppers - Determination of Global Migration First Edition
Optics and photonics - Environmental requirements - Part 1: General overview, terms and definitions, climatic zones and their
ISO
10109-1
parameters Second Edition
Optics and Optical Instruments - Environmental Requirements - Part 4: Test Requirements for Telescopic Systems First Edition;
ISO
10109-4
Corrected Version: 5/01/2002
ISO
10109-6
Optics and photonics - Environmental requirements - Part 6: Test requirements for medical optical instruments Second Edition
Optics and Optical Instruments - Environmental Requirements - Part 7: Test Requirements for Optical Measuring Instruments First
ISO
10109-7
Edition
ISO
10109-8
Optics and photonics - Environmental requirements - Part 8: Test requirements for extreme conditions of use Second Edition
Optics and Optical Instruments - Environmental Requirements - Part 11: Optical Instruments for Outdoor Conditions of Use First
ISO
10109-11
Edition
ISO
10109-12
Optics and optical instruments Environmental requirements Part 12: Conditions of transport for optical instruments First Edition
ISO
10110-1
Optics and photonics Preparation of drawings for optical elements and systems Part 1: General Second Edition
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 2: Material Imperfections - Stress
ISO
10110-2
Birefringence First Edition
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 3: Material Imperfections -
ISO
10110-3
Bubbles and Inclusions First Edition
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 4: Material Imperfections -
ISO
10110-4
Inhomogeneity and Striae First Edition
ISO
10110-5
Optics and photonics ù Preparation of drawings for optical elements and systems ù Part 5: Surface form tolerances Second Edition
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 6: Centring Tolerances First
ISO
10110-6
Edition; Technical Corrigendum 1:04/01/1999
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 7: Surface Imperfection
ISO
10110-7
Tolerances First Edition
ISO
10110-8
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 8: Surface Texture First Edition
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 9: Surface Treatment and Coating
ISO
10110-9
First Edition
Optics and photonics Preparation of drawings for optical elements and systems Part 10: Table representing data of optical elements
ISO
10110-10
and cemented assemblies Second Edition
Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 11: Non-Toleranced Data First
ISO
10110-11
Edition; Corrigendum 1: 09/01/2006
ISO
10110-12
Optics and photonics ù Preparation of drawings for optical elements and systems ù Part 12: Aspheric surfaces Second edition
Optics and photonics ù Preparation of drawings for optical elements and systems ù Part 14: Wavefront deformation tolerance Second
ISO
10110-14
edition
Optics and photonics Preparation of drawings for optical elements and systems Part 17: Laser irradiation damage threshold First
ISO
10110-17
edition
Metallic and Other Inorganic Coatings - Measurement of Mass Per Unit Area - Review of Gravimetric and Chemical Analysis Methods
ISO
10111
First Edition
ISO
10112
Damping Materials - Graphical Presentation of the Complex Modulus First Edition
ISO
10113
Metallic materials Sheet and strip Determination of plastic strain ratio Second Edition
ISO
10115
Oil of Tarragon (Artemisia Dracunculus L.), French Type First Edition
ISO
10116
Information technology Security techniques Modes of operation for an n-bit block cipher Third Edition
ISO
10118-1
Information Technology - Security Techniques - Hash-Functions - Part 1: General Second Edition
Information technology ù Security techniques ù Hash-functions ù Part 2: Hash-functions using an n-bit block cipher TECHNICAL
ISO
10118-2 CORR 2
CORRIGENDUM 2
Information technology ù Security techniques ù Hash-functions ù Part 2: Hash-functions using an n-bit block cipher TECHNICAL
ISO
10118-2 CORR 1
CORRIGENDUM 1 Second Edition
ISO
10118-2
Information technology ù Security techniques ù Hash-functions ù Part 2: Hash-functions using an n-bit block cipher Second Edition
Information technology ù Security techniques ù Hash-functions ù Part 3: Dedicated hash-functions AMENDMENT 1: Dedicated Hash-
ISO
10118-3 AMD 1
Function 8 (SHA-224) Third Edition
ISO
10118-3
Information technology ù Security techniques ù Hash-functions ù Part 3: Dedicated hash-functions Third Edition
ISO
10118-4
Information Technology - Security Techniques - Hash-Functions - Part 4: Hash-Functions Using Modular Arithmetic First Edition
ISO
10119
Carbon Fibre - Determination of Density Second Edition
ISO
10122
Reinforcement Materials - Tubular Braided Sleeves - Basis for a Specification First Edition
ISO
10123
Adhesives - Determination of Shear Strength of Anaerobic Adhesives Using Pin-and-Collar Specimens First Edition
Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for Pressure Purposes - Ultrasonic Testing for the Detection of
ISO
10124
Laminar Imperfections First Edition
ISO
10126-1
Banking - Procedures for Message Encipherment (Wholesale) - Part 1: General Principles First Edition
ISO
10126-2
Banking - Procedures for Message Encipherment (Wholesale) - Part 2: DEA Algorithm First Edition
Plain bearings Testing of bearing metals Resistance to corrosion by lubricants under static conditions First Edition; Supersedes
ISO
10129
ISO/TR 10129: 1993
ISO
10131-1
Foldaway Beds - Safety Requirements and Tests - Part 1: Safety Requirements First Edition
ISO
10131-2
Foldaway Beds - Safety Requirements and Tests - Part 2: Test Methods First Edition
ISO
10132
Textiles - Textured Filament Yarn - Definitions First Edition
ISO
10133
Small Craft - Electrical Systems - Extra-Low-Voltage d.c. Installations Second Edition
ISO
10134
Small Craft - Electrical Devices - Lightning-Protection Systems Second Edition
ISO
10135
Technical Drawings - Simplified Representation of Moulded, Cast and Forged Parts First Edition
Glass and Glassware - Analysis of Extract Solutions - Part 1: Determination of Silicon Dioxide by Molecular Absorption Spectrometry
ISO
10136-1
First Edition
Glass and Glassware - Analysis of Extract Solutions - Part 2: Determination of Sodium Oxide and Potassium Oxide by Flame
ISO
10136-2
Spectrometric Methods First Edition
Glass and Glassware - Analysis of Extract Solutions - Part 3: Determination of Calcium Oxide and Magnesium Oxide by Flame
ISO
10136-3
Atomic Absorption Spectrometry First Edition
Glass and Glassware - Analysis of Extract Solutions - Part 4: Determination of Aluminium Oxide by Molecular Absorption
ISO
10136-4
Spectrometry First Edition
Glass and Glassware - Analysis of Extract Solutions - Part 5: Determination of Iron(III) Oxide by Molecular Absorption Spectrometry
ISO
10136-5
and Flame Atomic Absorption Spectrometry First Edition
Glass and Glassware - Analysis of Extract Solutions - Part 6: Determination of Boron(III) Oxide by Molecular Absorption Spectrometry
ISO
10136-6
First Edition
ISO
10137
Bases for Design of Structures - Serviceability of Buildings Against Vibration First Edition
Steel and Iron - Determination of Chromium Content - Flame Atomic Absorption Spectrometric Method First Edition (AS/NZS
ISO
10138
1050.39: 1994)
Dentistry ù Soft lining materials for removable dentures ù Part 1 Materials for short-term use TECHNICAL CORRIGENDUM 1 Second
ISO
10139-1 CORR 1
Edition
ISO
10139-1
Dentistry ù Soft lining materials for removable dentures ù Part 1: Materials for short-term use Second Edition
ISO
10139-2
Dentistry - Soft Lining Materials for Removable Dentures - Part 2: Materials for Long-Term Use First Edition
Carbonaceous Materials for Use in the Production of Aluminium - Calcined Coke - Determination of Grain Stability Using a Laboratory
ISO
10142
Vibration Mill First Edition
Carbonaceous Materials for the Production of Aluminium - Calcined Coke for Electrodes - Determination of the Electrical Resistivity
ISO
10143
of Granules First Edition
ISO
10144
Certification Scheme for Steel Bars and Wires for the Reinforcement of Concrete Structures First Edition
ISO
10145-1
End Mills with Brazed Helical Hardmetal Tips - Part 1: Dimensions of End Mills with Parallel Shank First Edition
ISO
10145-2
End Mills with Brazed Helical Hardmetal Tips - Part 2: Dimensions of End Mills with 7/24 Taper Shank First Edition
ISO
10146
Crosslinked Polyethylene (PE-X) Pipes - Effect of Time and Temperature on the Expected Strength First Edition
Pipes and Fittings Made of Crosslinked Polyethylene (PE-X) - Estimation of the Degree of Crosslinking by Determination of the Gel
ISO
10147
Content Second Edition
ISO
10149
Information Technology - Data Interchange on Read-Only 120 mm Optical Data Disks (CD-ROM) Second Edition
ISO
10153
Steel - Determination of Boron Content - Curcumin Spectrophotometric Method Second Edition
ISO
10154
Light Gauge Metal Containers - Three-Piece Necked-in Tinplate Aerosol Cans - Dimensions of the Top End First Edition
Stationary Source Emissions - Automated Monitoring of Mass Concentrations of Particles - Performance Characteristics, Test
ISO
10155
Methods and Specifications First Edition Corrigendum 1: 02/15/2002
Gases and Gas Mixtures - Determination of Fire Potential and Oxidizing Ability for the Selection of Cylinder Valve Outlets Second
ISO
10156
Edition
Gas cylinders Gases and gas mixtures Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures First
ISO
10156-2
Edition; Together with ISO 10156-1 Supersedes ISO 10156:1996
ISO
10157
Photography - Flash Exposure Meter - Requirements First Edition; (Corrected and Reprinted - 1991)
Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Service Definition Second Edition;
ISO
10160
Amendment 1: 11/01/2002
Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 1:
ISO
10161-1
Protocol Specification Second Edition; Amendment 1: 11/01/2002; Amendment 2: 11/01/2002
Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 2:
ISO
10161-2
Protocol Implementation Conformance Statement (PICS) Proforma First Edition
Information Technology - Open Systems Interconnection - Systems Management: Object Management Function First Edition; CCITT
ISO
10164-1
RECMN X.730; AS/NZS 4152.1: 1994; CAN/CSA-ISO/IEC-10164-1-95; Amendment 1-1996; Corrigendum 1-1996
Information Technology - Open Systems Interconnection - Systems Management: State Management Function Amendment 2:
Amendment to Support Lifecycle State First Edition; CCITT RECMN X.731; AS/NZS 4152.2: 1994; CAN/CSA-ISO/IEC-10164-2-95;
ISO
10164-2
Amendment 1-1996; Corrigendum 1-1996; Amendment 2: 03/01/2002; Corrigendum 2: 4/15/2002
Information Technology - Open Systems Interconnection - Systems Management: Attributes for Representing Relationships First
ISO
10164-3
Edition; CCITT RECMN X.733; CAN/CSA-ISO/IEC-10164-3-95; Amendment 1 - 05/15/1996; Corrigendum 1 - 12/15/1996
Information Technology - Open Systems Interconnection - Systems Management: Alarm Reporting Function First Edition; CCITT
RECMN X.733; Corrigendum 1-12/15/1996; AS/NZS 4152.4: 1994; Amendment 1- 12/15/1995; CAN/CSA-ISO/IEC 10164-4-95;
ISO
10164-4
Corrigendum 1-09/01/1994; Corrigendum 1-12/15/1996; Technical Corrigendum 2-12/15/1999
Information Technology - Open Systems Interconnection - Systems Management: Event Report Management Function First Edition;
CCITT RECMN X.734; Corrigendum 1-12/15/1996; AS/NZS 4152.5: 1994; Amendment 1-12/15/1995; Technical Corrigendum 2-
ISO
10164-5
12/15/1999
Information Technology - Open Systems Interconnection - Systems Management: Log Control Function First Edition; CAN/CSA-
ISO
10164-6
ISO/IEC 10164-6-95; Amendment 1: 05/15/1996; Corrigendum 1: 12/15/1996; Technical Corrigendum 1: 03/01/2003
Information Technology - Open Systems Interconnection - Systems Management: Security Alarm Reporting Function First Edition;
ISO
10164-7
CCITT RECMN X.736; AS/NZS 4152.7: 1993; Amendment 1-1995; CAN/CSA-ISO/IEC 10164-7-95; Corrigendum 1-1996
Information Technology - Open Systems Interconnection - Systems Management: Security Audit Trail Function First Edition;
ISO
10164-8
Technical Corrigendum 1: 12/15/1995; Technical Corrigendum 2: 12/15/1996; Technical Corrigendum 3: 11/01/1999
Information Technology - Open Systems Interconnection - Systems Management: Objects and Attributes for Access Control First
ISO
10164-9
Edition; Technical Corrigendum 1: 12-15-1996; Technical Corrigendum 2: 11-01-1999; Technical Corrigendum 3: 04/15/2002
Information Technology - Open Systems Interconnection - Systems Management: Usage Metering Function for Accounting Purposes
ISO
10164-10
First Edition; Amendment 1: 12-15-1998; Technical Corrigendum 1: 11-01-1999; Technical Corrigendum 2: 4/15/2002
Information Technology - Open Systems Interconnection - Systems Management: Metric Objects and Attributes First Edition;
ISO
10164-11
Amendment 1: 12-15-1998; Technical Corrigendum 1: 11-01-1999
Information Technology - Open Systems Interconnection - Systems Management: Test Management Function First Edition; Technical
ISO
10164-12
Corrigendum 1: 10-15-1998; Technical Corrigendum 2: 11-01-1999; Technical Corrigendum 3: 4/15/2002
Information Technology - Open Systems Interconnection - Systems Management: Summarization Function First Edition; Amendment
ISO
10164-13
1 04-01-97; Corrigendum 1: 11-15-99; Corrigendum 2: 04-15-2002
Information Technology - Open Systems Interconnection - Systems Management: Confidence and Diagnostic Test Categories First
ISO
10164-14
Edition; Technical Corrigendum 1:12/15/1999; Technical Corrigendum 2: 4/15/2002; Technical Corrigendum 3: 4/15/2002
ISO
10164-15
Information technology Open Systems Interconnection Systems management: Scheduling function Second Edition
Information Technology - Open Systems Interconnection - Systems Management: Management Knowledge Management Function
ISO
10164-16
First Edition; Amendment 1:12/15/1998; Corrigendum 1: 02/01/2002
Information Technology - Open Systems Interconnection - Systems Management: Change over Function First Edition; ITU-T
ISO
10164-17
Rec.X.751 1995; Technical Corrigendum 1 06/15/1999; Technical Corrigendum 2: 02/01/2002
Information Technology - Open Systems Interconnection - Systems Management: Software Management Function First Edition; ITU-
T Rec.X.744 1996; Technical Corrigendum 1 06/15/1999; Technical Corrigendum 2: 03/01/2002; Technical Corrigendum 3:
ISO
10164-18
03/01/2002
Information Technology - Open Systems Interconnection - Systems Management: Management Domain and Management Policy
ISO
10164-19
Management Function First Edition
Information Technology - Open Systems Interconnection - Systems Management: Time Management Function First Edition; ITU-T
ISO
10164-20
Rec.X.743 1998; Technical Corrigendum 1: 02/01/2002
Information Technology - Open Systems Interconnection - Systems Management: Command Sequencer for Systems Management
ISO
10164-21
First Edition
ISO
10164-22
Information Technology - Open Systems Interconnection - Systems Management: Response Time Monitoring Function First Edition
Information Technology - Open Systems Interconnection - Structure of Management Information: Management Information Model
ISO
10165-1
First Edition; (Corrigendum 1-1994) (AS/NZS 4151.1: 1994) (Amendment 1-1996)
Information Technology - Open Systems Interconnection - Structure of Management Information: Definition of Management
Information First Edition; Technical Corrigendum 1: 09-01-1994; Technical Corrigendum 2: 12-15-1996; Technical Corrigendum 3: 10-
ISO
10165-2
15-1999
Information Technology - Open Systems Interconnection - Structure of Management Information: Definition of Management
ISO
10165-2 DAM 1
Information Amendment 1: States to Support Lifecycle 2003
Information Technology - Open Systems Interconnection - Structure of Management Information: Definition of Management
ISO
10165-2 DAM 2
Information Amendment 2: Enhanced Event Control 1996
Information Technology - Open Systems Interconnection - Structure of Management Information: Guidelines for the Definition of
Managed Objects First Edition; Amendment 1: 08/01/1996; Corrigendum 1: 12/15/1996; Amendment 2: 12/15/1998 and Amendment
ISO
10165-4
3: 12/15/1998; Corrigendum 2: 2/01/2003
10165-4 DRAFT
Information Technology - Open Systems Interconnection - Structure of Management Information: Guidelines for the Definition of
ISO
AMD 4
Managed Objects Amendment 4: GDMO+: Specifying the Behaviour of Managed Objects 1997
Information Technology - Open Systems Interconnection - Structure of Management Information: Generic Management Information
ISO
10165-5
First Edition; Corrigendum 1: 12/15/1998; Corrigendum 2: 4/15/2002
Information Technology - Open Systems Interconnection - Structure of Management Information: Requirements and Guidelines for
ISO
10165-6
Implementation Conformance Statement Proformas Associated with OSI Management Second Edition
Information Technology - Open Systems Interconnection - Structure of Management Information: General Relationship Model First
ISO
10165-7
Edition
Information Technology - Open Systems Interconnection - Structure of Management Information: Managed Objects for Supporting
ISO
10165-8
Upper Layers First Edition
Information Technology - Open Systems Interconnection - Structure of Management Information: Systems Management Application
ISO
10165-9
Layer Managed Objects First Edition
Information Technology - Text and Office Systems - Document Filing and Retrieval (DFR) - Part 1: Abstract Service Definition and
Procedures First Edition; Corrigendum 1-1994; Corrigendum 2-1994; Corrigendum 3-1994; Corrigendum 4-1998; Amendment 1-
ISO
10166-1
1995; Amendment 2-1996
Information Technology - Text and Office Systems - Document Filing and Retrieval (DFR) - Part 2: Protocol Specification First Edition;
ISO
10166-2
(Corrigendum 1-1994) (Corrigendum 2-1995) (Amendment 1-1995) (AS/NZS 4167.2: 1994) (Amendment 2-1996)
Information Technology - Telecommunications and Information Exchange between Systems - Interface Connector and Contact
ISO
10173
Assignments for ISDN Primary Rate Access Connector Located at Reference Points S and T Second Edition
Information Technology - Text and Office Systems - Document Printing Application (DPA) - Part 1: Abstract Service Definition and
Procedures First Edition; Technical Corrigendum 1: 07/01/1998; Technical Corrigendum 2: 11/15/1998; Technical Corrigendum 3:
ISO
10175-1
12/01/1998; Technical Corrigendum 4: 12/01/1998
ISO
10175-2
Information Technology - Text and Office Systems - Document Printing Application (DPA) - Part 2: Protocol Specification First Edition
Information Technology - Text and Office Systems - Document Printing Application (DPA) - Part 3: Management Abstract Service
ISO
10175-3
Definitions and Procedures First Edition
Information Technology - Telecommunications and Information Exchange Between Systems - Provision of the Connection-Mode
Network Internal Layer Service by Intermediate Systems Using ISO/IEC 8208, the X.25 Packet Layer Protocol First Edition; AS/NZS
ISO
10177
4217: 1994
Information Technology - Processing Languages - Document Style Semantics and Specification Language (DSSSL) First Edition;
ISO
10179
Corrigendum 1: 03-01-2001; Amendment 1: 10-01-2003; Amendment 2: 08-15-2005
Information Technology - Processing Languages - Standard Page Description Language (SPDL) First Edition; Corrigendum 1:
ISO
10180
10/15/2001
ISO
10181-1
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Overview First Edition
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Authentication Framework First
ISO
10181-2
Edition
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Access Control Framework First
ISO
10181-3
Edition
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Non-Repudiation Framework
ISO
10181-4
First Edition
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Confidentiality Framework First
ISO
10181-5
Edition
ISO
10181-6
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Integrity Framework First Edition
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Security Audit and Alarms
ISO
10181-7
Framework First Edition
ISO
10185
Tobacco and Tobacco Products - Vocabulary Tabac et produits du tabac Vocabulaire Second Edition
ISO
10190
Motor Cycle Chains - Characteristics and Test Methods First Edition
ISO
10191
Passenger Car Tyres - Verifying Tyre Capabilities - Laboratory Test Methods Second Edition; Amendment 1: 09/01/1998
ISO
10192-1
Information Technology - Home Electronic System (HES) Interfaces Part 1: Universal Interface (UI) Class 1 First edition
General Use Light Gauge Metal Containers - Nominal Filling Volumes of Round Cylindrical and Tapered Containers of up to 40 000
ISO
10193
ml First Edition Cancels and Replaces Both ISO/TR 10193: 1989 and ISO 11944:1993
ISO
10196
Document Imaging Applications - Recommendations for the Creation of Original Documents Second Edition
ISO
10197
Micrographics - Reader-Printers for Transparent Microforms - Characteristics First Edition
ISO
10198
Micrographics - Rotary Camera for 16 mm Microfilm - Mechanical and Optical Characteristics First Edition
ISO
10203
Iron Ores - Determination of Calcium - Flame Atomic Absorption Spectrometric Method Second Edition
ISO
10204
Iron Ores - Determination of Magnesium - Flame Atomic Absorption Spectrometric Method Second Edition
ISO
10206
Information Technology - Programming Languages - Extended Pascal First Edition
Rock Drilling Equipment - Rope Threaded Drill Steel Equipment for Percussive Drilling, Nominal Sizes 22 mm to 38 mm First Edition;
ISO
10207
Corrigendum 1: 1991
ISO
10208
Rock Drilling Equipment - Left-Hand Rope Threads First Edition
Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of Drawings First
ISO
10209-1
Edition;
Technical Product Documentation - Vocabulary - Part 2: Terms Relating to Projection Methods First Edition; (Corrected and
ISO
10209-2
Reprinted - 1994) (CEN EN ISO 10209-2: 1996)
Technical Product Documentation - Vocabulary - Part 4: Terms Relating to Construction Documentation Documentation Technique
ISO
10209-4
De Produit - Vocabulaire - Parte 4: Termes Relatifs A La Documentation Des Constructions First Edition
Thermal Bridges in Building Construction - Heat Flows and Surface Temperatures - Part 1: General Calculation Methods First Edition
ISO
10211-1
(CEN EN ISO 10211-1: 1995) Technical Corrigendum: 5/01/2002
Thermal Bridges in Building Construction - Calculation of Heat Flows and Surface Temperatures - Part 2: Linear Thermal Bridges
ISO
10211-2
First Edition
ISO
10213
Aluminium Ores - Determination of Total Iron Content - Titanium Trichloride Reduction Method First Edition
Anodized Aluminium and Aluminium Alloys - Visual Determination of Image Clarity of Anodic Oxidation Coatings - Chart Scale
ISO
10215
Method First Edition
Anodized Aluminium and Aluminium Alloys - Instrumental Determination of Image Clarity of Anodic Oxidation Coatings - Instrumental
ISO
10216
Method First Edition
ISO
10218-1 CORR 1
Robots for industrial environments ù Safety requirements ù Part 1: Robot TECHNICAL CORRIGENDUM 1 First Edition
ISO
10218-1
Robots for industrial environments Safety requirements Part 1: Robot First Edition; Supersedes ISO 10218:1992
ISO
10223
Textile machinery and accessories Flat warp knitting machines Numbering of guide bars Second Edition
ISO
10226
Aluminium Ores - Experimental Methods for Checking the Bias of Sampling First Edition
ISO
10227
Human/Human Surrogate Impact (Single Shock) Testing and Evaluation - Guidance on Technical Aspects First Edition
ISO
10228
Cross-Country Skis - Binding Mounting Area - Requirements for Test Screws First Edition
Water Quality - Determination of the Prolonged Toxicity of Substances to Freshwater Fish - Method for Evaluating the Effects of
ISO
10229
Substances on the Growth Rate of Rainbow Trout (Oncorhynchus Mykiss Walbaum (Teleostei, Salmonidae) First Edition
ISO
10230
Cycles - Splined Hub and Sprocket - Mating Dimensions First Edition
ISO
10231
Motorcycle tyres Test methods for verifying tyre capabilities Third edition
Carbonaceous Materials for the Production of Aluminium - Green Coke and Calcined Coke for Electrodes - Determination of Bulk
ISO
10236
Density (Tapped) First Edition
Carbonaceous Materials for Use in the Production of Aluminium - Calcined Coke - Determination of Residual-Hydrogen Content First
ISO
10237
Edition
Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Determination of Sulfur Content by an
ISO
10238
Instrumental Method First Edition
ISO
10239
Small Craft - Liquefied Petroleum Gas (LPG) Systems First Edition; Technical Corrigendum 1: 07/15/2001
ISO
10240
Small Craft - Owner s Manual Second Edition
ISO
10241
International Terminology Standards - Preparation and Layout First Edition
ISO
10242-1
Tools for Pressing - Punch Holder Shanks - Part 1: Type A Second Edition
ISO
10242-2
Tools for Pressing - Punch Holder Shanks - Part 2: Type C First Edition
ISO
10242-3
Tools for Pressing - Punch Holder Shanks - Part 3: Type D First Edition
ISO
10243
Tools for Pressing - Compression Springs with Rectangular Section - Housing Dimensions and Colour Coding First Edition
ISO
10245-1
Cranes - Limiting and Indicating Devices - Part 1: General First Edition
ISO
10245-2
Cranes - Limiting and Indicating Devices - Part 2: Mobile Cranes First Edition
ISO
10245-3
Cranes - Limiting and Indicating Devices - Part 3: Tower Cranes First Edition
ISO
10245-4 CORR 1
Cranes ù Limiting and indicating devices Part 4: Jib cranes TECHNICAL CORRIGENDUM 1 First Edition
ISO
10245-4
Cranes ù Limiting and indicating devices ù Part 4: Jib cranes First Edition
ISO
10245-5
Cranes - Limiting and Indicating Devices - Part 5: Overhead Travelling and Portal Bridge Cranes First Edition
ISO
10247
Conveyor belts - Characteristics of covers - Classification First Edition; Amendment 1: 01/15/2006
ISO
10248
Fluid Fertilizers - De-Aeration of Suspension Samples by Film Disentrainment First Edition
ISO
10249
Fluid Fertilizers - Preliminary Visual Examination and Preparation of Samples for Physical Testing First Edition
ISO
10251
Copper, lead, zinc and nickel concentrates Determination of mass loss of bulk material on drying Second Edition
ISO
10253
Water Quality - Marine Algal Growth Inhibition Test with Skeletonema Costatum and Phaeodactylum Tricornutum Second Edition
ISO
10254
Air Cargo and Ground Equipment - Vocabulary First Edition
ISO
10256
Head and face protection for use in ice hockey Second Edition;
ISO
10258
Copper Sulfide Concentrates - Determination of Copper Content - Titrimetric Methods First Edition
Water Quality - Measurement of Biochemical Parameters - Spectrometric Determination of the Chlorophyll-a Concentration First
ISO
10260
Edition
ISO
10261
Earth-Moving Machinery - Product Identification Numbering System Second Edition
Earth-Moving Machinery - Hydraulic Excavators - Laboratory Tests and Perfomance Requirements for Operator Protective Guards
ISO
10262
First Edition
ISO
10263-1
Earth-Moving Machinery - Operator Enclosure Environment - Part 1: General and Definitions First Edition
ISO
10263-2
Earth-Moving Machinery - Operator Enclosure Environment - Part 2: Air Filter Test First Edition
ISO
10263-3
Earth-Moving Machinery - Operator Enclosure Environment - Part 3: Operator Enclosure Pressurization Test Method First Edition
Earth-Moving Machinery - Operator Enclosure Environment - Part 4: Operator Enclosure Ventilation, Heating and/or Air-Conditioning
ISO
10263-4
Test Method First Edition
ISO
10263-5
Earth-Moving Machinery - Operator Enclosure Environment - Part 5: Windscreen Defrosting System Test Method First Edition
Earth-Moving Machinery - Operator Enclosure Environment - Part 6: Determination of Effect of Solar Heating on Operator Enclosure
ISO
10263-6
First Edition
ISO
10264
Earth-Moving Machinery - Key-Locked Starting Systems First Edition
ISO
10265
Earth-Moving Machinery - Crawler Machines - Performance Requirements and Test Procedures for Braking Systems First Edition
ISO
10266
Earth-Moving Machinery - Determination of Slope Limits for Machine Fluid Systems Operation - Static Test Method First Edition
ISO
10268
Earth-Moving Machinery - Retarders for Dumpers and Tractor-Scrapers - Performance Tests First Edition
Corrosion of Metals and Alloys - Aqueous Corrosion Testing of Zirconium Alloys for Use in Nuclear Power Reactors First Edition;
ISO
10270
Corrigendum 1 07-15-1997
ISO
10271
Dental Metallic Materials - Corrosion Test Methods First Edition; Corrigendum 1: 1/15/2005
Microbiology of food and animal feeding stuffs Horizontal method for detection and enumeration of Campylobacter spp. Part 1:
ISO
10272-1
Detection method First Edition; Together with ISO TS 10272-2:2006 replaces ISO 10272:1995
Microbiology of food and animal feeding stuffs Horizontal method for the detection of presumptive pathogenic Yersinia enterocolitica
ISO
10273
Second Edition
ISO
10275
Metallic materials ù Sheet and strip ù Determination of tensile strain hardening exponent Second Edition
ISO
10277
Aluminium Ores Experimental Methods for Checking the Precision of Sampling First Edition
ISO
10278
Steel - Determination of Manganese Content - Inductively Coupled Plasma Atomic Emission Spectrometric Method First Edition
ISO
10279
Information Technology - Programming Languages - Full BASIC First Edition; (Amendment 1-1994)
Steel and Iron - Determination of Titanium Content - Diantipyrylmethane Spectrophotometric Method First Edition (CEN EN ISO
ISO
10280
10280: 1995)
ISO
10282 CORR 1
Single-use sterile rubber surgical gloves ù Specification TECHNICAL CORRIGENDUM 1 Second Edition
ISO
10282
Single-Use Sterile Surgical Rubber Gloves - Specification Second Edition
ISO
10283
Binders for paints and varnishes ù Determination of monomeric diisocyanates in isocyanate resins Second Edition
ISO
10284
Cinematography - Graphical Symbols - Description First Edition
ISO
10285
Rolling Bearings, Linear Motion, Recirculating Ball, Sleeve Type - Metric Series First Edition
ISO
10286
Gas Cylinders - Terminology Bouteilles A Gaz - Terminologie Third Edition
Methods for Corrosion Testing of Metallic and Other Inorganic Coatings on Metallic Substrates - Rating of Test Specimens and
Manufactured Articles Subjected to Corrosion Tests First Edition; Cancels and Replaces ISO 1462: 1973, ISO 4540: 1980 and ISO
ISO
10289
8403: 1991
ISO
10290
Textiles - Cotton Yarns - Specifications First Edition
Glass in Building - Determination of Steady-State U Values (Thermal Transmittance) of Multiple Glazing - Guarded Hot Plate Method
ISO
10291
First Edition
ISO
10292
Glass in Building - Calculation of Steady-State U Values (Thermal Transmittance) of Multiple Glazing First Edition
Glass in Building - Determination of Steady-State U Values (Thermal Transmittance) of Multiple Glazing - Heat Flow Meter Method
ISO
10293
First Edition
ISO
10294-1
Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 1: Test Method First Edition
Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 2: Classification, Criteria and Field of Application of Test
ISO
10294-2
Results First Edition
ISO
10294-3
Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 3: Guidance on the Test Method First Edition
ISO
10294-4
Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 4: Test of Thermal Release Mechanism First Edition
ISO
10294-5
Fire resistance tests - Fire dampers for air distribution systems - Part 5: Intumescent fire dampers First edition
ISO
10295-1
Fire tests for building elements and components ù Fire testing of service installations ù Part 1: Penetration seals First Edition
ISO
10296
Aircraft - Hybrid Remote Power Controllers - General Requirements First Edition
ISO
10297
Transportable gas cylinders - Cylinder valves - Specification and type testing Second Edition
ISO
10298
Determination of Toxicity of a Gas or Gas Mixture First Edition
ISO
10299
Aerospace - Rivets, Solid - Material and Metric Series Identification First Edition
ISO
10300-1
Calculation of Load Capacity of Bevel Gears - Part 1: Introduction and General Influence Factors First Edition
ISO
10300-2
Calculation of Load Capacity of Bevel Gears - Part 2: Calculation of Surface Durability Corrected Version; 5/15/2003
ISO
10300-3
Calculation of Load Capacity of Bevel Gears - Part 3: Calculation of Tooth Root Strength First Edition; Corrected Version 6/15/2003
ISO
10301
Water Quality - Determination of Highly Volatile Halogenated Hyrdrocarbons - Gas-Chromatographic Methods First Edition
ISO
10302
Acoustics - Method for the Measurement of Airborne Noise Emitted by Small Air-Moving Devices First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1: Overview and Fundamental
ISO
10303-1
Principles First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 11: Description Methods: the
ISO
10303-11
EXPRESS Language Reference Manual Second Edition
Industrial automation systems and integration Product data representation and exchange Part 14: Description methods: The
ISO
10303-14
EXPRESS-X language reference manual First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 21: Implementation Methods:
ISO
10303-21
Clear Text Encoding of the Exchange Structure Second Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 22: Implementation Methods:
ISO
10303-22
Standard Data Access Interface First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 23: Implementation Methods: C++
ISO
10303-23
Language Binding to the Standard Data Access Interface First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 24: Implementation Methods: C
ISO
10303-24
Language Binding of Standard Data Access Interface First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 31: Conformance Testing
ISO
10303-31
Methodology and Framework: General Concepts First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 32: Conformance Testing
ISO
10303-32
Methodology and Framework: Requirements on Testing Laboratories and Clients First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 34: Conformance Testing
ISO
10303-34
Methodology and Framework: Abstract Test Methods for Application Protocol Implementations First Edition
Industrial automation systems and integration Product data representation and exchange Part 41: Integrated generic resource:
ISO
10303-41
Fundamentals of product description and support Third Edition
Industrial automation systems and integration - Product data representation and exchange - Part 42: Integrated generic resource:
ISO
10303-42 CORR 1
Geometric and topological representation, TECHNICAL CORRIGENDUM 1 Third Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 42: Integrated Generic Resource:
ISO
10303-42
Geometric and Topological Representation Third Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 43: Integrated Generic
ISO
10303-43
Resources: Representation Structures Technical Corrigendum 2 04/01/2000
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 43: Integrated Generic Resource:
ISO
10303-43
Representation Structures Second Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 44: Integrated Generic
ISO
10303-44
Resources: Product Structure Configuration First Edition; Technical Corrigendum 1: 03-15-1999
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 44: Integrated Generic Resource:
ISO
10303-44
Product Structure Configuration Second Edition; Technical Corrigendum 1: 03-15-2001
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 45: Integrated Generic Resource:
ISO
10303-45
Materials First Edition; Technical Corrigendum 1: 03-15-1999
Industrial automation systems and integration - Product data representation and exchange - Part 45: Integrated generic resource:
ISO
DIS 10303-45
Material and other engineering properties
Industrial automation systems and integration Product data representation and exchange Part 46: Integrated generic resources:
ISO
10303-46
Visual presentation First Edition; Corrigendum 1: 07/15/1999; Corrigendum 2: 5/15/2002; Corrigendum 3: 08/01/2006
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 47: Integrated Generic Resource:
ISO
10303-47
Shape Variation Tolerances First Edition; Technical Corrigendum 1: 10/15/2000
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 49: Integrated Generic
ISO
10303-49
Resources: Process Structure and Properties First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 50: Integrated Generic
ISO
10303-50
Resources: Mathematical Constructs First Edition
Industrial automation systems and integration ù Product data representation and exchange ù Part 55: Integrated generic resource:
ISO
10303-55 CORR 1
Procedural and hybrid representation TECHNICAL CORRIGENDUM 1 First Edition
Industrial automation systems ù Product data representation and exchange ù Part 55: Integrated generic resource: Procedural and
ISO
10303-55
hybrid representation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 101: Intergrated Application
ISO
10303-101
Resources: Draughting First Edition; Corrigendum 1: 04/15/1999
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 104: Integrated Application
ISO
10303-104
Resource: Finite Element Analysis First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 105: Integrated Application
ISO
10303-105
Resource: Kinematics First Edition; Technical Corrigendum 1:03/01/2000; Technical Corrigendum 2: 10/15/2000
Industrial automation systems and integration Product data representation and exchange Part 108: Integrated application resource:
ISO
10303-108
Parameterization and constraints for explicit geometric product models First Edition
Industrial automation systems and integration Product data representation and exchange Part 109: Integrated application resource:
ISO
10303-109
Kinematic and geometric constraints for assembly models First Edition
Industrial automation systems and integration ù Product data representation and exchange ù Part 111: Integrated application
ISO
10303-111
resource: Elements for the procedural modelling of solid shapes First Edition
Industrial automation systems and integration Product data representation and exchange Part 112: Integrated application resource:
ISO
10303-112
Modelling commands for the exchange of procedurally represented 2D CAD models First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 201: Application Protocol: Explicit
ISO
10303-201
Draughting First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 202: Application Protocol:
ISO
10303-202
Associative Draughting First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 203: Application Protocol:
Configuration Controlled Design First Edition; Technical Corrigendum 1: 03/15/1995; Technical Corrigendum 2: 12/15/1998;
ISO
10303-203
Amendment 1: 11/01/2000; Technical Corrigendum 3: 02/15/2004
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 204: Application Protocol:
ISO
10303-204
Mechanical Design Using Boundary Representation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 207: Application Protocol: Sheet
ISO
10303-207
Metal Die Planning and Design First Edition; Technical Corrigendum 1: 03-01-2001
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 209: Application Protocol:
ISO
10303-209
Composite and Metallic Structural Analysis and Related Design First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 210: Application Protocol:
ISO
10303-210
Electronic Assembly, Interconnection, and Packaging Design First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 212: Application Protocol:
ISO
10303-212
Electrotechnical Design and Installation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 214: Application Protocol: Core
ISO
10303-214
Data for Automotive Mechanical Design Processes Second Edition
Industrial automation systems and integration Product data representation and exchange Part 215: Application protocol: Ship
ISO
10303-215
arrangement First Edition
Industrial automation systems and integration Product data representation and exchange Part 216: Application protocol: Ship
ISO
10303-216
moulded forms First Edition
Industrial automation systems and integration Product data representation and exchange Part 218: Application protocol: Ship
ISO
10303-218
structures First Edition
Industrial automation systems and integration Product data representation and exchange Part 224: Application protocol: Mechanical
ISO
10303-224
product definition for process planning using machining feature Third Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 225: Application Protocol: Building
ISO
10303-225
Elements Using Explicit Shape Representation First Edition
Industrial automation systems and integration - Product data representation and exchange - Part 227: Application protocol: Plant
ISO
10303-227
spatial configuration Second Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 232: Application Protocol:
ISO
10303-232
Tehcnical Data Packaging Core Information and Exchange First Edition
Industrial automation systems and integration ù Product data representation and exchange ù Part 238: Application protocol:
ISO
10303-238
Application interpreted model for computerized numerical controllers First Edition
Industrial automation systems and integration Product data representation and exchange Part 240: Application protocol: Process
ISO
10303-240
plans for machined products First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 501: Application Interpreted
ISO
10303-501
Construct: Edge-Based Wireframe First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 502: Application Interpreted
ISO
10303-502
Construct: Shell-Based Wireframe First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 503: Application Interpreted
ISO
10303-503
Construct: Geometrically Bounded 2D Wireframe First Edition; Technical Corrigendum 1: 12/1/2006
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 504: Application Interpreted
ISO
10303-504
Construct: Draughting Annotation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 505: Application Interpreted
ISO
10303-505
Construct: Drawing Structure and Administration First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 506: Application Interpreted
ISO
10303-506
Construct: Draughting Elements First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 507: Application Interpreted
ISO
10303-507
Construct: Geometrically Bounded Surface First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 508: Application Interpreted
ISO
10303-508
Construct: Non-Manifold Surface First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 509: Application Interpreted
ISO
10303-509
Construct: Manifold Surface First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 510: Application Interpreted
ISO
10303-510
Construct: Geometrically Bounded Wireframe First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 511: Application Interpreted
ISO
10303-511
Construct: Topologically Bounded Surface First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 512: Application Interpreted
ISO
10303-512
Construct: Faceted Boundary Representation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 513: Application Interpreted
ISO
10303-513
Construct: Elementry Boundary Representation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 514: Application Interpreted
ISO
10303-514
Construct: Advanced Boundary Representation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 515: Application Interpreted
ISO
10303-515
Construct: Constructive Solid Geometry First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 517: Application Interpreted
ISO
10303-517
Construct: Mechanical Design Geometric Presentation First Edition; Corrigendum 1: 02/01/2002
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 518: Application Interpreted
ISO
10303-518
Construct: Mechanical Design Shaded Presentation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 519: Application Interpreted
ISO
10303-519
Construct: Geometric Tolerances First Edition; Technical Corrigendum 1: 10/15/2000
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 520: Application Interpreted
ISO
10303-520
Construct: Associative Draughting Elements First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 521: Application Interpreted
ISO
10303-521
Construct: Manifold Subsurface First Edition
Industrial automation systems and integration Product data representation and exchange Part 522: Application interpreted construct:
ISO
10303-522
Machining features Second Edition
Industrial automation systems and integration Product data representation and exchange Part 523: Application interpreted construct:
ISO
10303-523
Curve swept solid First Edition
Water quality ù Determination of dissolved anions by liquid chromatography of ions ù Part 1: Determination of bromide, chloride,
ISO
10304-1
fluoride, nitrate, nitrite, phosphate and sulfate Second Edition [Cancelled: ISO 10304-2]
Water Quality - Determination of Dissolved Anions by Liquid Chromatography of Ions - Part 3: Determination of Chromate, Iodide,
ISO
10304-3
Sulfite, Thiocyanate and Thiosulfate First Edition
Water Quality - Determination of Dissolved Anions by Liquid Chromatography of Ions - Part 4: Determination of Chlorate, Chloride
ISO
10304-4
and Chlorite in Water with Low Contamination First Edition
ISO
10306
Textiles - Cotton Fibres - Evaluation of Maturity by the Air Flow Method First Edition
ISO
10307-1
Petroleum Products - Total Sediment in Residual Fuel Oils - Part 1: Determination by Hot Filtration First Edition; Corrigendum 1-1997
Petroleum Products - Total Sediment in Residual Fuel Oils - Part 2: Determination Using Standard Procedures for Ageing First
ISO
10307-2
Edition
ISO
10308
Metallic coatings Review of porosity tests Second Edition
ISO
10309
Metallic Coatings - Porosity Tests - Ferroxyl Test First Edition
ISO
10310
Neurosurgical Implants - Marking and Packaging of Implantable Neural Stimulators First Edition
ISO
10312
Ambient Air - Determination of Asbestos Fibres - Direct-Transfer Transmission Electron Microscopy Method First Edition
ISO
10313
Ambient Air - Determination of the Mass Concentration of Ozone - Chemiluminescence Method First Edition
Cigarettes - Determination of Nicotine in Smoke Condensates - Gas- Chromatographic Method Second Edition; Technical
ISO
10315
Corrigendum 1: 11-15-2000
ISO
10316
Shipbuilding - Class B Magnetic Compasses - Tests and Certification First Edition
ISO
10317
Rolling Bearings - Metric Tapered Roller Bearings - Designation System First Edition
ISO
10318
Geosynthetics Terms and definitions Second Edition
ISO
10319
Geotextiles - Wide-Width Tensile Test First Edition (CEN EN ISO 10319: 1996)
ISO
10320
Geotextiles and Geotextile-Related Products - Identification on Site Second Edition
ISO
10321
Geotextiles - Tensile Test for Joints/Seams by Wide-Width Method First Edition (CEN EN ISO 10321: 1996)
Ophthalmic Optics - Semi-Finished Spectacle Lens Blanks - Part 1: Specifications for Single-Vision and Multifocal Lens Blanks Third
ISO
10322-1
Edition
ISO
10322-2
Ophthalmic Optics - Semi-Finished Spectacle Lens Blanks - Part 2: Specifications for Progressive Power Lens Blanks Third Edition
ISO
10323
Dental Rotary Instruments - Bore Diameters for Discs and Wheels First Edition; (CEN EN ISO 10 323: 1995)
ISO
10324
Information and Documentation - Holdings Statements - Summary Level First Edition
ISO
10326-1 AMD 1
Mechanical vibration ù Laboratory method for evaluating vehicle seat vibration ù Part 1: Basic requirements First Edition
Mechanical Vibration - Laboratory Method for Evaluating Vehicle Seat Vibration - Part 1: Basic Requirements First Edition (CEN EN
ISO
10326-1
30326-1:1994)
ISO
10326-2
Mechanical Vibration - Laboratory Method for Evaluating Vehicle Seat Vibration - Part 2: Application to Railway Vehicles First Edition
ISO
10327
Aircraft - Certified Aircraft Container for Air Cargo - Specification and Testing First Edition
Prosthetics Structural testing of lowerlimb prostheses Requirements and test methods First Edition; Replaces ISO 10328-1:1996 to
ISO
10328
ISO 10328-8:1996
ISO
10328-5
Prosthetics - Structural Testing of Lower-Limb Prostheses - Part 5: Supplementary Structural Tests First Edition;:2006
Prosthetics - Structural Testing of Lower-Limb Prostheses - Part 6: Loading Parameters of Supplementary Structural Tests First
ISO
10328-6
Edition;:2006
Photography - Synchronizers, Ignition Circuits and Connectors for Cameras and Photoflash Units - Electrical Characteristics and Test
ISO
10330
Methods Second Edition
Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for Pressure Purposes - Ultrasonic Testing for Verification of
ISO
10332
Hydraulic Leak-Tightness First Edition
ISO
10333-1
Personal Fall-Arrest Systems - Part 1: Full-Body Harnesses First Edition; Amendment 1: 03/15/2002
ISO
10333-2
Personal Fall-Arrest Systems - Part 2: Lanyards and Energy Absorbers First Edition
ISO
10333-3
Personal Fall-Arrest Systems - Part 3: Self-Retracting Lifelines First Edition
ISO
10333-4
Personal Fall-Arrest Systems - Part 4: Vertical Rails and Vertical Lifelines Incorporting a Sliding-Type Fall Arrester First Edition
ISO
10333-5
Personal Fall-Arrest Systems - Part 5:Connectors with Self-Closing and Self-Locking Gates First Edition
ISO
10333-6
Personal fall-arrest systems Part 6: System performance tests First Edition
ISO
10334
Implants for Surgery - Malleable Wires for Use as Sutures and Other Surgical Applications First Edition
ISO
10336
Crude Petroleum - Determination of Water - Potentiometric Karl Fischer Titration Method First Edition
ISO
10337
Crude Petroleum - Determination of Water - Coulometric Karl Fischer Titration Method First Edition
ISO
10341
Ophthalmic Instruments - Refractor Heads First Edition
ISO
10342
Ophthalmic Instruments - Eye Refractometers Second Edition
ISO
10343
Ophthalmic Instruments - Ophthalmometers First Edition
ISO
10345-1
Glass - Determination of Stress-Optical Coefficient - Part 1: Tensile Test First Edition
ISO
10345-2
Glass - Determination of Stress-Optical Coefficient - Part 2: Bending Test First Edition
ISO
10348
Photography - Processing Wastes - Determination of Silver Content First Edition
ISO
10349-1
Photography - Photographic-Grade Chemicals - Test Methods - Part 1: General First Edition Second edition
ISO
10349-2
Photography - Photographic-Grade Chemicals - Test Methods - Part 2: Determination of Matter Insoluble in Water First Edition
Photography - Photographic-Grade Chemicals - Test Methods - Part 3: Determination of Matter Insoluble in Ammonium Hydroxide
ISO
10349-3
Solution First Edition
ISO
10349-4
Photography - Photographic-Grade Chemicals - Test Methods - Part 4: Determination of Residue After Ignition First Edition
ISO
10349-5
Photography - Photographic-Grade Chemicals - Test Methods - Part 5: Determination of Heavy Metals and Iron Content First Edition
ISO
10349-6
Photography - Photographic-Grade Chemicals - Test Methods - Part 6: Determination of Halide Content First Edition
ISO
10349-7
Photography - Photographic-Grade Chemicals - Test Methods - Part 7: Determination of Alkalinity or Acidity First Edition
ISO
10349-8
Photography - Photographic-Grade Chemicals - Test Methods - Part 8: Determination of Volatile Matter Second edition
ISO
10349-9
Photography - Photographic-Grade Chemicals - Test Methods - Part 9: Reaction to Ammoniacal Silver Nitrate First Edition
ISO
10349-10
Photography - Photographic-Grade Chemicals - Test Methods - Part 10: Determination of Sulfide Content First Edition
ISO
10349-11
Photography - Photographic-Grade Chemicals - Test Methods - Part 11: Determination of Specific Gravity First Edition
ISO
10349-12
Photography - Photographic-Grade Chemicals - Test Methods - Part 12: Determination of Density First Edition
ISO
10349-13
Photography - Photographic-Grade Chemicals - Test Methods - Part 13: Determination of pH First Edition
ISO
10350-1
Plastics ù Acquisition and presentation of comparable single-point data ù Part 1: Moulding materials Second Edition
ISO
10350-2
Plastics - Aquisition and Presentation of Comparable Single-Point Data - Part 2: Long-Fibre-Reinforced Plastics First Edition
ISO
10352
Fibre-Reinforced Plastics - Moulding Compounds and Prepregs - Determination of Mass per Unit Area Second Edition
ISO
10354
Adhesives - Characterization of Durability of Structural -Adhesive-Bonded Assemblies - Wedge Rupture Test First Edition
ISO
10355
Mopeds - Positioning of Lighting and Light-Signalling Devices Second Edition
ISO
10356
Cinematography - Storage and Handling of Nitrate- Base Motion-Picture Films First Edition
ISO
10359-1
Water Quality - Determination of Fluoride - Part 1: Electrochemical Probe Method for Potable and Lightly Polluted Water First Edition
Water Quality - Determination of Fluoride - Part 2: Determination of Inorganically Bound Total Fluoride After Digestion and Distillation
ISO
10359-2
First Edition
Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 1:
Vocabulary Specification Geometrique Des Produits (GPS) - Essais De Reception Et De Verification Periodique Des Machines A
ISO
10360-1
Mesurer Tridimensionnelles (MMT) - Partie 1: Vocabulaire First Edition; Corrigendum 1: 11/15/2002
Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 2:
ISO
10360-2
CMMs Used for Measuring Size Second Edition
Geometrical Product Specifications (GPS) - Acceptance and Reverification Test for Coordinate Measuring Machines (CMM) - Part 3:
ISO
10360-3
CMMs with the Axis of a Rotary Table as the Fourth Axis First Edition
Geometrical Product Specifications (GPS) - Acceptance and Reverification Test for Coordinate Measuring Machines (CMM) - Part 4:
ISO
10360-4
CMMs Used in Scanning Measuring Mode First Edition; Corrigendum 1: 11/15/2002
Geometrical Product Specifications (GPS) Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) Part 5:
ISO
10360-5
CMMs Using Multiple-Stylus Probing Systems First Edition
Geometrical Product Specifications (GPS) ù Acceptance and reverification tests for coordinate measuring machines (CMM) ù Part 6:
ISO
10360-6 CORR 1
Estimation of errors in computing Gaussian associated features
Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 6:
ISO
10360-6
Estimation of Errors in Computing Gaussian Associated Features First Edition
Textile Floor Coverings - Production of Changes in Appearance by Means of Vettermann Drum and Hexapod Tumbler Testers First
ISO
10361
Edition
ISO
10362-1
Cigarettes - Determination of Water in Smoke Condensates - Part 1: Gas-Chromatographic Method Second Edition
ISO
10362-2
Cigarettes - Determination of Water in Smoke Condensates - Part 2: Karl Fischer Method First Edition
ISO
10363
Hot-Melt Adhesives - Determination of Thermal Stability First Edition (CEN EN ISO 10363: 1995)
ISO
10364
Structural adhesives ù Determination of the pot life (working life) of multi-component adhesives Second Edition
ISO
10365
Adhesives - Designation of Main Failure Patterns First Edition (CEN EN ISO 10365: 1995)
Plastics - Methyl Methacrylate-Acrylonitrile-Butadiene-Styrene (MABS) Moulding and Extrusion Materials - Part 1: Designation System
ISO
10366-1
and Basis for Specifications Second Edition
Plastics Methyl methacrylateacrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Part 2: Preparation of test
ISO
10366-2
specimens and determination of properties Second Edition
ISO
10367
Information Technology - Standardized Coded Graphic Character Sets for Use in 8-Bit Codes Technical Corrigendum 1:06/01/2001
ISO
10368
Freight thermal containers Remote condition monitoring Second Edition
ISO
10370
Petroleum Products - Determination of Carbon Residue - Micro Method First Edition (CEN EN ISO 10370: 1996)
ISO
10371
Reinforcement Materials - Braided Tapes - Basis for a Specification First Edition
ISO
10372
Hydraulic Fluid Power - Four- and Five-Port Servovalves - Mounting Surfaces First Edition
ISO
10373-1
Identification Cards - Test Methods - Part 1: General Characteristics Second Edition
ISO
10373-2
Identification cards Test methods Part 2: Cards with magnetic stripes Second Edition
ISO
10373-3
Identification Cards - Test Methods - Part 3: Integrated Circuit(s) Cards with Contacts and Related Interface Devices First Edition
ISO
10373-5
Identification cards - Test methods - Part 5: Optical memory cards Second Edition
ISO
10373-6 AMD 1
Identification cards ù Test methods ù Part 6: Proximity cards AMENDMENT 1: Protocol test methods for proximity cards First Edition
Identification cards ù Test methods ù Part 6: Proximity cards AMENDMENT 3: Protocol test methods for proximity coupling devices
ISO
10373-6 AMD 3
First Edition
Identification cards ù Test methods ù Part 6: Proximity cards AMENDMENT 4: Additional test methods for PCD RF interface and
ISO
10373-6 AMD 4
PICC alternating field exposure First Edition
ISO
10373-6 AMD 2
Identification cards ù Test methods ù Part 6: Proximity cards AMENDMENT 2: Improved RF test methods First Edition
ISO
10373-6
Identification Cards - Test Methods - Part 6: Proximity Cards First Edition
ISO
10373-6 FDAM 5
Identification Cards - Test Methods - Part 6: Proximity Cards AMENDMENT 5: Bit rates of fc/64, fc/32 and fc/16
ISO
10373-7
Identification Cards - Test Methods - Part 7: Vicinity Cards First Edition
ISO
10374
Freight Containers - Automatic Identification First Edition; Amendment 1: 1995
ISO
10375
Non-Destructive Testing - Ultrasonic Inspection - Characterization of Search Unit and Sound Field First Edition
Copper, lead and zinc sulfide concentrates Determination of gold and silver Fire assay gravimetric and flame atomic absorption
ISO
10378
spectrometric method Second Edition
ISO
10380
Pipework - Corrugated Flexible Metallic Hose and Hose Assemblies Second Edition
ISO
10381-1
Soil quality - Sampling - Part 1: Guidance in the design of sampling programs First edition
ISO
10381-2
Soil Quality - Sampling - Part 2: Guidance on Sampling Techniques First Edition
ISO
10381-3
Soil Quality - Sampling - Part 3: Guidance on Safety First Edition
ISO
10381-4
Soil quality Sampling Part 4: Guidance on the procedure for investigation of natural, near-natural and cultivated sites First Edition
Soil quality Sampling Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil
ISO
10381-5
contamination First Edition
Soil Quality - Sampling - Part 6: Guidance on the Collection, Handling and Storage of Soil for the Assessment of Aerobic Microbial
ISO
10381-6
Processess in the Laboratory First Edition
ISO
10381-7
Soil quality Sampling Part 7: Guidance on sampling of soil gas First Edition
ISO
10381-8
Soil quality Sampling Part 8: Guidance on sampling of stockpiles First Edition
Soil Quality - Determination of Organochlorine Pesticides and Polychlorinated Biphenyls - Gas-Chromatographic Method with
ISO
10382
Electron Capture Detection First Edition
ISO
10383
Securities and related financial instruments Codes for exchanges and market identification (MIC) second Edition
ISO
10384
Hot-Rolled Carbon Steel Sheet as Defined by Chemical Composition Second Edition
ISO
10386
Ferroboron - Specification and Conditions of Delivery First Edition
ISO
10387
Metal Chrome - Specification and Conditions of Delivery First Edition
ISO
10390
Soil quality - Determination of pH Second Edition
ISO
10392
Road Vehicles with Two Axles - Determination of Centre of Gravity First Edition
Stationary source emissions ù Sampling for the automated determination of gas emission concentrations for permanentlyinstalled
ISO
10396
monitoring systems Second Edition
ISO
10397
Stationary Source Emissions - Determination of Asbestos Plant Emissions - Method by Fibre Count Measurement First Edition
ISO
10398
Rubber - Identification of Accelerators in Cured and Uncured Compounds First Edition
ISO
10399
Sensory analysis Methodology Duo-trio test Second Edition
ISO
10400
Petroleum and Natural Gas Industries - Formulae and Calculation for Casing, Tubing, Drill Pipe and Line Pipe Properties First Edition
ISO
10405
Petroleum and Natural Gas Industries - Care and Use of Casing and Tubing Second Edition
ISO
10407
Petroleum and Natural Gas Industries - Drilling and Production Equipment - Drill Stem Design and Operating Limits First Edition
ISO
10414-1
Petroleum and Natural Gas Industries - Field Testing of Drilling Fluids - Part 1: Water-Based Fluids First Edition
ISO
10414-2
Petroleum and Natural Gas Industries - Field Testing of Drilling Fluids - Part 2: Oil-Based Fluids First Edition
ISO
10416
Petroleum and natural gas industries Drilling fluids Laboratory testing First Edition
Petroleum and Natural Gas Industries - Subsurface Safety Petroleum and natural gas industries Subsurface safety valve systems
ISO
10417
Design, installation, operation and redress Second Edition
ISO
10418
Petroleum and natural gas industries Offshore production installations Basic surface process safety systems Second Edition
ISO
10423
Petroleum and Natural Gas Industries - Drilling and Production Equipment - Wellhead and Christmas Tree Equipment Third Edition
ISO
10424-1
Petroleum and natural gas industries Rotary drilling equipment Part 1: Rotary drill stem elements First Edition
ISO
10425
Steel wire ropes for the petroleum and natural gas industries Minimum requirements and terms of acceptance First Edition
ISO
10426-1
Petroleum and natural gas industries Cements and materials for well cementing Part 1: Specification Second Edition
Petroleum and natural gas industries ù Cements and materials for well cementing ù Part 2: Testing of well cements TECHNICAL
ISO
10426-2 CORR 1
CORRIGENDUM 1
Petroleum and natural gas industries Cements and materials for well cementing Part 2: Testing of well cements AMENDMENT 1:
ISO
10426-2 AMD 1
Water-wetting capability testing First Edition
ISO
10426-2
Petroleum and natural gas industries Cements and materials for well cementing Part 2: Testing of well cements First Edition
Petroleum and natural gas industries Cements and materials for well cementing Part 3: Testing of deepwater well cement
ISO
10426-3
formulations First Edition
Petroleum and natural gas industries Cements and materials for well cementing Part 4: Preparation and testing of foamed cement
ISO
10426-4
slurries at atmospheric pressure First Edition
Petroleum and natural gas industries Cements and materials for well cementing Part 5: Determination of shrinkage and expansion
ISO
10426-5
of well cement formulations at atmospheric pressure First Edition
Petroleum and Natural Gas Industries - Equipment for Well Cementing - Part 1: Casing Bow-Spring Centralizers First Edition
/Cobranded with API Spec 10D; Corrected Version 10-01-2003; Together with ISO 10427-2 and ISO 10427-3 Replaces ISO
ISO
10427-1
10427:1993
Petroleum and natural gas industries Equipment for well cementing Part 2: Centralizer placement and stop-collar testing First
ISO
10427-2
Edition; Together with ISO 10427-1 and ISO 10427-3 Replaces ISO 10427:1993
Petroleum and Natural Gas Industries - Equipment for Well Cementing - Part 3: Performance Testing of Cementing Float Equipment
ISO
10427-3
First Edition; Together with ISO 10427-1 and ISO 10427-2 Replaces ISO 10427:1993
Petroleum and Natural Gas Industries - Sucker Rods (Pony Rods, Polished Rods, Couplings and Sub-Couplings) - Specification First
ISO
10428
Edition
ISO
10431
Petroleum and Natural Gas Industries - Pumping Units - Specification First Edition
ISO
10432
Petroleum and Natural Gas Industries - Downhole Equipment - Subsurface Safety Valve Equipment Third Edition
ISO
10434
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Second Edition
ISO
10437
Petroleum, petrochemical and natural gas industries Steam turbines Special-purpose applications Second Edition
Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 1:
ISO
10438-1
General requirements
Petroleum, petrochemical and natural gas industries ù Lubrication, shaft-sealing and control-oil systems and auxiliaries ù Part 1:
ISO
FDIS 10438-1
General requirements
Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3:
ISO
10438-3
General-purpose oil systems First Edition
Petroleum, petrochemical and natural gas industries ù Lubrication, shaft-sealing and control-oil systems and auxiliaries ù Part 3:
ISO
FDIS 10438-3
General-purpose oil systems
Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Self-
ISO
10438-4
acting gas seal support systems First Edition
Petroleum, petrochemical and natural gas industries ù Lubrication, shaft-sealing and control-oil systems and auxiliaries ù Part 4: Self-
ISO
FDIS 10438-4
acting gas seal support systems
ISO
10439
Petroleum, Chemical and Gas Service Industries - Centrifugal Compressors First Edition; Corrected Version 06/15/2003
Petroleum and Natural Gas Industries - Rotary-Type Positive-Displacement Compressors - Part 2: Packaged Air Compressors (Oil
ISO
10440-2
Free) First Edition
Petroleum, petrochemical and natural gas industries ù Flexible couplings for mechanical power transmission ù Special-purpose
ISO
10441
applications Second Edition
ISO
10442
Petroleum, Chemical and Gas Service Industries Packaged, Integrally Geared Centrifugal Air Compressors First Edition
ISO
10444
Information and Documentation - International Standard Technical Report Number (ISRN) First Edition
ISO
10447
Resistance welding Peel and chisel testing of resistance spot and projection welds Second Edition
ISO
10448
Agricultural Tractors - Hydraulic Pressure for Implements First Edition
ISO
10451
Dental Implant Systems - Contents of Technical File First Edition
ISO
10454
Truck and Bus Tyres - Verifying Tyre Capabilities - Laboratory Test Methods First Edition
ISO
10455
Road Vehicles - Dry Ignition Coils Using Rotating High-Voltage Distributor First Edition
ISO
10456
Building Materials and Products - Procedures for Determining Declared and Design Thermal Values Second Edition
ISO
10457
Textile machinery Dyeing and finishing machines Nominal speeds Second Edition
ISO
10458
Textile Machinery - Square Bars for Winding Devices Relating to Dyeing and Finishing Machines - Dimensions First Edition
ISO
10459
Textile Machinery - Dyeing and Finishing Machines - Designation of Operating Ranges of Component Parts First Edition
ISO
10460
Gas cylinders Welded carbon-steel gas cylinders Periodic inspection and testing Second Edition
ISO
10461 AMD 1
Gas cylinders ù Seamless aluminiumalloy gas cylinders ù Periodic inspection and testing AMENDMENT 1 Second Edition
ISO
10461
Gas cylinders ù Seamless aluminium-alloy gas cylinders ù Periodic inspection and testing Second Edition
ISO
10462
Gas cylinders Transportable cylinders for dissolved acetylene Periodic inspection and maintenance Second Edition
ISO
10464
Gas cylinders Refillable welded steel cylinders for liquefied petroleum gas (LPG) Periodic inspection and testing First Edition
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Test Method to Prove the Resistance to Initial Ring
ISO
10466
Deflection First Edition
Plastics piping systems for pressure and non-pressure drainage and sewerage Glass-reinforced thermosetting plastics (GRP)
ISO
10467
systems based on unsaturated polyester (UP) resin First Edition
Glass-reinforced thermosetting plastics (GRP) pipes Determination of the long-term specific ring creep stiffness under wet conditions
ISO
10468
and calculation of the wet creep factor First Edition
ISO
10469
Copper sulfide concentrates - Determination of copper - Electrogravimetric method Second Edition
ISO
10470
Green Coffee - Defect Reference Chart Second Edition
Glass-reinforced thermosetting plastics (GRP) pipes Determination of the long-term ultimate bending strain and the long-term
ISO
10471
ultimate relative ring deflection under wet conditions First Edition
ISO
10472-1
Safety Requirements for Industrial Laundry Machinery - Part 1: Common Requirements First Edition
ISO
10472-2
Safety Requirements for Industrial Laundry Machinery - Part 2: Washing Machines and Washer-Extractors First Edition
ISO
10472-3
Safety Requirements for Industrial Laundry Machinery - Part 3: Washing Tunnel Lines Including Component Machines First Edition
ISO
10472-4
Safety Requirements for Industrial Laundry Machinery - Part 4: Air Dryers First Edition
ISO
10472-5
Safety Requirements for Industrial Laundry Machinery - Part 5: Flatwork Ironers, Feeders and Folders First Edition
ISO
10472-6
Safety Requirements for Industrial Laundry Machinery - Part 6:Ironing and Fusing Presses First Edition
ISO
10473
Ambient Air - Measurement of the Mass of Particulate Matter on a Filter Medium - Beta-Ray Absorption Method First Edition
ISO
10474
Steel and Steel Products - Inspection Documents First Edition; (Corrected and Reprinted - 1992)
ISO
10475
Valves for Tubeless Tyres and Valves for Tubes - Identification System for Valves and Their Components First Edition
ISO
10477
Dentistry - Polymer-Based Crown and Bridge Materials Second Edition
Petroleum Products - Determination of Aluminium and Silicon in Fuel Oils - Inductively Coupled Plasma Emission and Atomic
ISO
10478
Absorption Spectroscopy Methods First Edition
ISO
10483-1
Road vehicles Intelligent power switches Part 1: High-side intelligent power switch Second Edition
ISO
10483-2
Road Vehicles - Intelligent Power Switches - Part 2: Low-Side Intelligent Power Switch First Edition
ISO
10484
Widening Test on Nuts First Edition
ISO
10485
Cone Proof Load Test on Nuts First Edition
ISO
10486
Passenger Cars - Car Radio Identification Number (CRIN) First Edition
ISO
10487-1
Passenger Car Radio Connections - Part 1: Dimensions and General Requirements First Edition
ISO
10487-2
Passenger Cars - Connections for Car Radios - Part 2: Performance Requirements First Edition
ISO
10494
Gas Turbines and Gas Turbine Sets - Measurement of Emitted Airborne Noise - Engineering/Survey Method First Edition
ISO
10497
Testing of Valves - Fire Type-Testing Requirements Second Edition
ISO
10498
Ambient air Determination of sulfur dioxide Ultraviolet fluorescence method First Edition
Industrial Tyres and Rims - Solid Tyres (Metric Series) for Pneumatic Tyre Rims - Designation, Dimensions and Marking First Edition;
ISO
10499
Corrigendum 1-1997
ISO
10499-2
Industrial Tyres and Rims - Rubber Solid Tyres (Metric Series) for Pneumatic Tyre Rims - Part 2: Load Ratings First Edition
Industrial Tyres and Rims - Cylindrical and Conical Base Rubber Solid Tyres (Metric Series) - Designation, Dimensions and Marking
ISO
10500
First Edition
Aerospace - Hose Assemblies in Polytetrafluoroethylene (PTFE) for Use up to 232 Degrees C and 10 500 kPa - Procurement
ISO
10502
Specification First Edition
Starch Derivatives - Determination of the Composition of Glucose Syrups, Fructose Syrups and Hydrogenated Glucose Syrups -
ISO
10504
Method Using High-Performance Liquid Chromatography First Edition
ISO
10508
Plastics piping systems for hot and cold water installations - Guidance for classification and design Second Edition
ISO
10509
Hexagon Flange Head Tapping Screws First Edition (AS/NZS 4410: 1996)
ISO
10510
Tapping Screw and Washer Assemblies with Plain Washers First Edition
ISO
10511
Prevailing Torque Type Hexagon Thin Nuts (with Non-Metallic Insert) First Edition
Prevailing Torque Type Hexagon Nuts (with Non-Metallic Insert), Style 1, with Metric Fine Pitch Thread - Property Classes 6, 8 and 10
ISO
10512
First Edition
ISO
10513
Prevailing Torque Type All-Metal Hexagon Nuts, Style 2, with Metric Fine Pitch Thread - Property Classes 8, 10 and 12 First Edition
ISO
10514-1
Information Technology - Programming Languages - Part 1: Modula-2, Base Language First Edition
ISO
10514-2
Information Technology - Programming Languages - Part 2: Generics in Modula-2 First Edition
ISO
10514-3
Information Technology - Programming Languages - Part 3: Object Oriented Modula-2 First Edition
ISO
10517
Portable Powered Hedge Trimmers - Definitions, Mechanical Safety Requirements and Tests First Edition
Powered Walk-Behind and Hand-Held Lawn Trimmers and Lawn Edge Trimmers - Mechanical Safety Requirements and Test
ISO
10518
Methods First Edition; (Corrected and Reprinted - 1991) (Amendment 1-1994)
ISO
10519
Rapeseed - Determination of Chlorophyll Content - Spectrometric Method Second Edition
|
||
|
|
|