ASTM TOC (2004) - page 3

 

  Index      Manuals     ASTM TOC (2004)

 

Search            copyright infringement  

 

   

 

    

 

Content      ..     1      2      3      4      ..

 

 

 

ASTM TOC (2004) - page 3

 

 

Section 11 - Water and Environmental Technology
Volume 11.01, January 2005
Water (I)
D0511-03 Test Methods for Calcium and Magnesium In Water
D0512-04 Test Methods for Chloride Ion In Water
D0513-02 Test Methods for Total and Dissolved Carbon Dioxide in Water
D0516-02 Test Method for Sulfate Ion in Water
D0596-01 Guide for Reporting Results of Analysis of Water
D0807-00 Test Method for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method)
D0857-02 Test Method for Aluminum in Water
D0858-02 Test Methods for Manganese in Water
D0859-00 Test Method for Silica in Water
D0888-03 Test Methods for Dissolved Oxygen in Water\t
D1066-97R01 Practice for Sampling Steam
D1067-02 Test Methods for Acidity or Alkalinity of Water
D1068-03 Test Methods for Iron in Water
D1125-95R99 Test Methods for Electrical Conductivity and Resistivity of Water
D1126-02 Test Method for Hardness in Water
D1129-04 Terminology Relating to Water
D1179-04 Test Methods for Fluoride Ion in Water
D1192 Guide for Equipment for Sampling Water and Steam in Closed Conduits
D1193-99E01 Specification for Reagent Water
D1246-95R99 Test Method for Bromide Ion in Water
D1253-03 Test Method for Residual Chlorine in Water
D1292-86R99 Test Method for Odor in Water
D1293-99R05 Test Methods for pH of Water
D1385-01 Test Method for Hydrazine in Water
D1426-03 Test Methods for Ammonia Nitrogen In Water\t
D1429-03 Test Methods for Specific Gravity of Water and Brine
D1498-00 Practice for Oxidation-Reduction Potential of Water
D1687-02 Test Methods for Chromium in Water
D1688-02 Test Methods for Copper in Water
D1691-02 Test Methods for Zinc in Water
D1886-03 Test Methods for Nickel in Water\t
D1889-00 Test Method for Turbidity of Water
D1941-91R01 Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
D1971-02 Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
D1976-02 Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
D2688-05 Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
D2777-03 Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
D2791-93R01 Test Methods for Continuous Determination of Sodium in Water
D2972-03 Test Methods for Arsenic in Water
D3082-03 Test Method for Boron In Water
D3223-02 Test Method for Total Mercury in Water
D3370-95AR03E01 Practices for Sampling Water from Closed Conduits
D3372-02 Test Method for Molybdenum in Water
D3373-03 Test Method for Vanadium in Water
D3557-02 Test Methods for Cadmium in Water
D3558-03 Test Methods for Cobalt in Water\t
D3559-03 Test Methods for Lead in Water
D3645-03 Test Methods for Beryllium in Water
D3697-02 Test Method for Antimony in Water
D3856-95R00 Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water
D3858-95R03 Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
D3859-03 Test Methods for Selenium in Water
D3864-96R00 Guide for Continual On-Line Monitoring Systems for Water Analysis
D3866-02 Test Methods for Silver in Water
D3867-04 Test Methods for Nitrite-Nitrate in Water
D3919-04 Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
D3920-02 Test Method for Strontium in Water
D4127-02 Terminology Used with Ion-Selective Electrodes
D4188-82R03 Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test
D4189-95R02 Test Method for Silt Density Index (SDI) of Water
D4190-03 Test Method for Elements in Water by Direct-Current Plasma Atomic Emission Spectroscopy
D4191-03 Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
D4192-03 Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
D4210 Practice for Intralaboratory Quality Control Procedures and a Discussion on Reporting Low-Level Data
D4309-02 Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
D4327-03 Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
D4375-96R01 Practice for Basic Statistics in Committee D19 on Water
D4382-02 Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
D4409-95R03 Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
D4410-03 Terminology for Fluvial Sediment
D4453-02 Practice for Handling of Ultra-Pure Water Samples
D4519-94R05 Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
D4638-03 Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
D4658-03 Test Method for Sulfide Ion in Water
D4691-02 Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
D4778-05 Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
D4779 Test Method for Total, Organic, and Inorganic Carbon in High Purity Water by Ultraviolet (UV) or Persulfate Oxidation, or Both, and Infrared Detection
D4840-99R04 Guide for Sample Chain-of-Custody Procedures
D4841-88R03 Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
D5089-95R03 Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
D5127-99 Guide for Ultra Pure Water Used in the Electronics and Semiconductor Industry
D5128-90R05 Test Method for On-Line pH Measurement of Water of Low Conductivity
D5129-95R03 Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions
D5130-95R03 Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
D5172-91R04 Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water
D5173-97R01 Test Method for On-Line Monitoring of Carbon Compounds in Water by Chemical Oxidation, by UV Light Oxidation, by Both, or by High Temperature Combustion Followed by Gas Phase NDIR or by Electrolytic
Conductivity
D5196-91R99 Guide for Biomedical Grade Water
D5242-92R01 Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs
D5243-92R01 Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
D5257-03 Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
D5387-93R02 Guide for Elements of a Complete Data Set for Non-Cohesive Sediments
D5388-93R02 Test Method for Indirect Measurements of Discharge by Step-Backwater Method
D5389-93R02 Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
D5390-93R02 Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes
D5391-99 Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
D5463-03 Guide for Use of Test Kits to Measure Inorganic Constituents in Water
D5464-93R01 Test Methods for pH Measurement of Water of Low Conductivity
D5540-94AR03 Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
D5541-94R03 Practice for Developing a Stage-Discharge Relation for Open Channel Flow
D5542-04 Test Methods for Trace Anions in High Purity Water by Ion Chromatography
D5543-94R05 Test Methods for Low-Level Dissolved Oxygen in Water
D5544-05 Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water
D5612-94R03 Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
D5810-96R01 Guide for Spiking into Aqueous Samples
D5851-95R00 Guide for Planning and Implementing a Water Monitoring Program
D5905-98R03 Practice for the Preparation of Substitute Wastewater
D5906-02 Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths
D5907-03 Test Method for Filterable and Nonfilterable Matter in Water
D5996-96R00 Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
D5997-96R00 Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
D6071-96R00 Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
D6091-03 Practice for 99 \%/95 \% Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
D6145-97R02 Guide for Monitoring Sediment in Watersheds
D6146-97R02 Guide for Monitoring Aqueous Nutrients in Watersheds
D6301-03 Practice for the Collection of Samples of Filterable and Nonfilterable Matter in Water
D6317-98R04 Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
D6318-03 Practice for Calibrating a Fathometer Using a Bar Check Method
D6326-98R03 Practice for The Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers
D6362-98R03 Practice for Certificates of Reference Materials for Water Analysis
D6501-04 Test Method for Phosphonate in Brines
D6502-99R03 Test Method for On-Line Measurement of Low Level Particulate and Dissolved Metals in Water by X-Ray Fluorescence (XRF)
D6504-00 Practice for On-Line Determination of Cation Conductivity in High Purity Water
D6512-03 Practice for Interlaboratory Quantitation Estimate
D6568-00 Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples
D6569-00 Test Method for On-Line Measurement of pH
D6581-00R05 Test Method for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Chemically Suppressed Ion Chromatography
D6689-01 Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
D6698-01 Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
D6764-02 Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
D6808-02 Practice for Competency Requirements of Reference Material Producers for Water Analysis
D6855-03 Test Method for Determination of Turbidity Below 5 NTU in Static Mode
F0660-83R02E01 Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
D0887-82R03E01 Practices for Sampling Water-Formed Deposits
D0932-85R02 Test Method for Iron Bacteria in Water and Water-Formed Deposits
D0933-84R03 Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
D0934-80R03 Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
D1141-98R03 Practice for the Preparation of Substitute Ocean Water
D1245-84R03 Practice for Examination of Water-Formed Deposits by Chemical Microscopy
D1252-00 Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
D1291-01 Practice for Estimation of Chlorine Requirement or Demand of Water, or Both
D1782-95R01 Test Methods for Operating Performance of Particulate Cation-Exchange Materials
D1783-01 Test Methods for Phenolic Compounds in Water
D1890-05 Test Method for Beta Particle Radioactivity of Water
D1943-96 Test Method for Alpha Particle Radioactivity of Water
D2035-80R03 Practice for Coagulation-Flocculation Jar Test of Water
D2036-98 Test Methods for Cyanides in Water
D2186-84R05 Test Methods for Deposit-Forming Impurities in Steam
D2187-94R04 Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins
D2330-02 Test Method for Methylene Blue Active Substances
D2331-80R03 Practices for Preparation and Preliminary Testing of Water-Formed Deposits
D2332-84R03 Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
D2460-97 Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water
D2579 Test Method for Total Organic Carbon in Water
D2580-94R01 Test Method for Phenols in Water by Gas-Liquid Chromatography
D2687-95R01 Practices for Sampling Particulate Ion-Exchange Materials
D2907 Test Methods for Microquantities of Uranium in Water by Fluorometry
D2908-91R01 Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
D3084-05 Practice for Alpha-Particle Spectrometry of Water
D3087-91R04 Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
D3113 Test Methods for Sodium Salts of EDTA in Water
D3263-03 Test Methods for Corrosivity of Solvent Systems for Removing Water-Formed Deposits
D3325-90R02E01 Practice for Preservation of Waterborne Oil Samples
D3326-90R02 Practice for Preparation of Samples for Identification of Waterborne Oils
D3328-00 Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
D3352-03E01 Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
D3371 Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography
D3375-95AR01 Test Method for Column Capacity of Particulate Mixed Bed IonExchange Materials
D3414-98R04 Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
D3415-98R04 Practice for Identification of Waterborne Oils
D3454-97 Test Method for Radium-226 in Water
D3483-83R05 Test Methods for Accumulated Deposition in a Steam Generator Tube
D3534 Test Method for Polychlorinated Biphenyls (PCBs) in Water
D3561-02 Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
D3590-02 Test Methods for Total Kjeldahl Nitrogen in Water
D3648-04 Practices for the Measurement of Radioactivity
D3649-98A Practice for High-Resolution Gamma-Ray Spectrometry of Water
D3650-93R99 Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis
D3651-02 Test Method for Barium in Brackish Water, Seawater, and Brines
D3694-96R04 Practices for Preparation of Sample Containers and for Preservation of Organic Constituents
D3695-95R01 Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
D3739-05 Practice for Calculation and Adjustment of the Langelier Saturation Index for Reverse Osmosis
D3861-91R03 Test Method for Quantity of Water-Extractable Matter in Membrane Filters
D3862-80R01 Test Method for Retention Characteristics of 0.2-|gmm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
D3863-87R03 Test Method for Retention Characteristics of 0.40 to 0.45-|gmm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
D3865-02 Test Method for Plutonium in Water
D3868-04 Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines
D3869-04 Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
D3871-84R03 Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
D3875-03 Test Method for Alkalinity in Brackish Water, Seawater, and Brines
D3921-96R03E01 Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
D3923-94R03E01 Practices for Detecting Leaks in Reverse Osmosis Devices
D3972-02 Test Method for Isotopic Uranium in Water by Radiochemistry
D3973-85R03 Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
D3974-81R03E01 Practices for Extraction of Trace Elements from Sediments
D3975-93R03 Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
D3976-92R01 Practice for Preparation of Sediment Samples for Chemical Analysis
D3977-97R02 Test Methods for Determining Sediment Concentration in Water Samples
D3986-02 Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
D4012-81R02 Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
D4025-97R03 Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
D4107-98R02E01 Test Method for Tritium in Drinking Water
D4128-01 Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry
D4129-98R03 Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
D4130-03 Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines
D4165-00 Test Method for Cyanogen Chloride in Water
D4193-02 Test Method for Thiocyanate in Water
D4194-03 Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
D4195-88R03 Guide for Water Analysis for Reverse Osmosis Application
D4196-05 Test Method for Confirming the Sterility of Membrane Filters
D4198-82R03 Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth
D4199-82R03 Test Methods for Autoclavability of Membrane Filters
D4200-82R03 Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters
D4201-96 Test Method for Coliphages in Water
D4249-83R98 Test Method for Enumeration of Candida albicans in Water
D4266-96R01 Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
D4281-95R01 Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination
D4282-02 Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
D4328-03 Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines
D4374-00 Test Methods for Cyanides in Water\MAutomated Methods for Total Cyanide, Acid dissociable Cyanide, and Thiocyanate
D4411-03 Guide for Sampling Fluvial Sediment in Motion
D4412-84R02 Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
D4454-85R02 Test Method for Simultaneous Enumeration of Total and Respiring Bacteria in Aquatic Systems by Microscopy
D4455-85R02 Test Method for Enumeration of Aquatic Bacteria by Epifluorescence Microscopy Counting Procedure
D4456-99 Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins
D4458-94R99 Test Method for Chloride Ions in Brackish Water, Seawater, and Brines
D4472-89R03 Guide for Recordkeeping for Reverse Osmosis Systems
D4489-95R01 Practices for Sampling of Waterborne Oils
D4515-85R01 Practice for Estimation of Holding Time for Water Samples Containing Organic Constituents
D4516-00 Practice for Standardizing Reverse Osmosis Performance Data
D4517-04 Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
D4520-03 Practice for Determining Water Injectivity Through the Use of On-Site Floods
D4548-91R02 Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
D4581-86R01 Guide for Measurement of Morphologic Characteristics of Surface Water Bodies
D4582-05 Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for Reverse Osmosis
D4657 Test Method for Polynuclear Aromatic Hydrocarbons in Water
D4692-01 Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO, SrSO, and BaSO) for Reverse Osmosis and Nanofiltration
D4698-92R01 Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
D4743 Test Method for Efficacy of Solvent Systems for Dissolving Water-Formed Deposits
D4744 Test Method for Organic Halides in Water by Carbon AdsorptionMicrocoulometric Detection
D4763-88R01 Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy
D4785-00A Test Method for Low-Level Iodine-131 in Water
D4822-88R03 Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
D4823-95R03E01 Guide for Core Sampling Submerged, Unconsolidated Sediments
D4839-03 Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
D4922-01 Test Method for Determination of Radioactive Iron in Water
D4962-02 Practice for NaI(Tl) Gamma-Ray Spectrometry of Water
D4983 Test Method for Cyclohexylamine, Morpholine, and Diethylaminoethanol in Water and Condensed Steam by Direct Aqueous Injection Gas Chromatography
D4993-89R03 Practice for Calculation and Adjustment of Silica (SiO) Scaling for Reverse Osmosis
D4994-89R02 Practice for Recovery of Viruses from Wastewater Sludges
D5037 Test Method for Comparison of Waterborne Petroleum Oils by High Performance Liquid Chromatography
D5042-90R04E01 Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins
D5072-98 Test Method for Radon in Drinking Water
D5073-02 Practice for Depth Measurement of Surface Water
D5074-90R03 Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
D5090-90R01 Practice for Standardizing Ultrafiltration Permeate Flow Performance Data
D5091-95R01 Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications
D5131-90R01 Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems
D5174-02 Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry
D5175-91R03 Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
D5176-91R03 Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
D5217-91R04 Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
D5241-92R04 Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water
D5244-92R04 Practice for Recovery of Enteroviruses from Waters
D5245-92R98 Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
D5246-92R04 Test Method for Isolation and Enumeration of from Water
D5256-00 Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
D5258-02 Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
D5259-92R00 Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
D5315-04 Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization
D5316-98R04 Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
D5317-98R03E01 Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
D5392-93R00 Test Method for Isolation and Enumeration of in Water by the Two-Step Membrane Filter Procedure
D5411-93R05E01 Practice for Calculation of Average Energy Per Disintegration (|$$|AmE) for a Mixture of Radionuclides in Reactor Coolant
D5412-93R00 Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
D5413-93R02 Test Methods for Measurement of Water Levels in Open-Water Bodies
D5462-02 Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
D5465-93R04 Practice for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
D5475-93R02 Test Method for Nitrogen- and Phosphorus-Containing Pesticides in Water by Gas Chromatography with a Nitrogen-Phosphorus Detector
D5613-94R03 Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers
D5614-94R03 Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs
D5615-95R01 Test Method for Operating Characteristics of Home Reverse Osmosis Devices
D5627-94R04 Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
D5640-95R03 Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water
D5673-03 Test Method for Elements in Water by Inductively Coupled Plasma\MMass Spectrometry
D5674-95R03 Guide for Operation of a Gaging Station
D5739-00 Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
D5765-95R01 Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating
D5788-95R01 Guide for Spiking Organics into Aqueous Samples
D5789 Practice for Writing Quality Control Specifications for Standard Test Methods for Organic Constituents
D5790-95R01 Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
D5811-00 Test Method for Strontium-90 in Water
D5812-96R02E01 Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography
D5847-02 Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
D5904-02 Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
D5916-96R02 Test Method for Detection and Enumeration of from Water and Extracted Sediments by Membrane Filtration (MF)
D6104-97R03 Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
D6156-97 Practice for Use of Reversed-Phase High Performance Liquid Chromatographic Systems
D6157-97R03 Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
D6161-98 Terminology Used for Crossflow Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes
D6238-98R03 Test Method for Total Oxygen Demand in Water
D6239-03 Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry
D6302-98R04 Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins
D6303-98 Test Method for Formaldehyde in Water
D6503-99 Test Method for Enterococci in Water Using Enterolert|Pt
D6508-00R05E01 Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
D6520-00 Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds
D6529-00 Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50\N1000 |gmS/cm
D6530-00 Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)
D6592-01 Test Method for Portable Chemiluminescent Water Quality Determination
D6696-01 Guide for Understanding Cyanide Species
D6697-01 Test Method for Determination for Chemical Oxygen Demand (Manganese III Oxygen Demand) of Water
D6734-01 Test Method for Low Levels of Coliphages in Water
D6800-02 Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
D6807-02 Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from2 to 100 |gmS/cm
D6850-03 Guide for QC of Screening Methods in Water
D6888-04 Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
D6889-03 Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
D6908-03 Practice for Integrity Testing of Water Filtration Membrane Systems
D6919-03 Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
D6994-04 Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
D7066-04 Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
F0316-03 Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
F0488 Test Method for On-Site Screening of Heterotrophic Bacteria in Water
F0838-05 Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration
Volume 11.02, May 2005
Water (II)
D0511-03 Test Methods for Calcium and Magnesium In Water
D0512-04 Test Methods for Chloride Ion In Water
D0513-02 Test Methods for Total and Dissolved Carbon Dioxide in Water
D0516-02 Test Method for Sulfate Ion in Water
D0596-01 Guide for Reporting Results of Analysis of Water
D0807-00 Test Method for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method)
D0857-02 Test Method for Aluminum in Water
D0858-02 Test Methods for Manganese in Water
D0859-00 Test Method for Silica in Water
D0888-03 Test Methods for Dissolved Oxygen in Water\t
D1066-97R01 Practice for Sampling Steam
D1067-02 Test Methods for Acidity or Alkalinity of Water
D1068-03 Test Methods for Iron in Water
D1125-95R99 Test Methods for Electrical Conductivity and Resistivity of Water
D1126-02 Test Method for Hardness in Water
D1129-04 Terminology Relating to Water
D1179-04 Test Methods for Fluoride Ion in Water
D1192 Guide for Equipment for Sampling Water and Steam in Closed Conduits
D1193-99E01 Specification for Reagent Water
D1246-95R99 Test Method for Bromide Ion in Water
D1253-03 Test Method for Residual Chlorine in Water
D1292-86R99 Test Method for Odor in Water
D1293-99R05 Test Methods for pH of Water
D1385-01 Test Method for Hydrazine in Water
D1426-03 Test Methods for Ammonia Nitrogen In Water\t
D1429-03 Test Methods for Specific Gravity of Water and Brine
D1498-00 Practice for Oxidation-Reduction Potential of Water
D1687-02 Test Methods for Chromium in Water
D1688-02 Test Methods for Copper in Water
D1691-02 Test Methods for Zinc in Water
D1886-03 Test Methods for Nickel in Water\t
D1889-00 Test Method for Turbidity of Water
D1941-91R01 Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
D1971-02 Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
D1976-02 Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
D2688-05 Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
D2777-03 Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
D2791-93R01 Test Methods for Continuous Determination of Sodium in Water
D2972-03 Test Methods for Arsenic in Water
D3082-03 Test Method for Boron In Water
D3223-02 Test Method for Total Mercury in Water
D3370-95AR03E01 Practices for Sampling Water from Closed Conduits
D3372-02 Test Method for Molybdenum in Water
D3373-03 Test Method for Vanadium in Water
D3557-02 Test Methods for Cadmium in Water
D3558-03 Test Methods for Cobalt in Water\t
D3559-03 Test Methods for Lead in Water
D3645-03 Test Methods for Beryllium in Water
D3697-02 Test Method for Antimony in Water
D3856-95R00 Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water
D3858-95R03 Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
D3859-03 Test Methods for Selenium in Water
D3864-96R00 Guide for Continual On-Line Monitoring Systems for Water Analysis
D3866-02 Test Methods for Silver in Water
D3867-04 Test Methods for Nitrite-Nitrate in Water
D3919-04 Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
D3920-02 Test Method for Strontium in Water
D4127-02 Terminology Used with Ion-Selective Electrodes
D4188-82R03 Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test
D4189-95R02 Test Method for Silt Density Index (SDI) of Water
D4190-03 Test Method for Elements in Water by Direct-Current Plasma Atomic Emission Spectroscopy
D4191-03 Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
D4192-03 Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
D4210 Practice for Intralaboratory Quality Control Procedures and a Discussion on Reporting Low-Level Data
D4309-02 Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
D4327-03 Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
D4375-96R01 Practice for Basic Statistics in Committee D19 on Water
D4382-02 Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
D4409-95R03 Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
D4410-03 Terminology for Fluvial Sediment
D4453-02 Practice for Handling of Ultra-Pure Water Samples
D4519-94R05 Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
D4638-03 Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
D4658-03 Test Method for Sulfide Ion in Water
D4691-02 Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
D4778-05 Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
D4779 Test Method for Total, Organic, and Inorganic Carbon in High Purity Water by Ultraviolet (UV) or Persulfate Oxidation, or Both, and Infrared Detection
D4840-99R04 Guide for Sample Chain-of-Custody Procedures
D4841-88R03 Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
D5089-95R03 Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
D5127-99 Guide for Ultra Pure Water Used in the Electronics and Semiconductor Industry
D5128-90R05 Test Method for On-Line pH Measurement of Water of Low Conductivity
D5129-95R03 Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions
D5130-95R03 Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
D5172-91R04 Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water
D5173-97R01 Test Method for On-Line Monitoring of Carbon Compounds in Water by Chemical Oxidation, by UV Light Oxidation, by Both, or by High Temperature Combustion Followed by Gas Phase NDIR or by Electrolytic
Conductivity
D5196-91R99 Guide for Biomedical Grade Water
D5242-92R01 Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs
D5243-92R01 Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
D5257-03 Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
D5387-93R02 Guide for Elements of a Complete Data Set for Non-Cohesive Sediments
D5388-93R02 Test Method for Indirect Measurements of Discharge by Step-Backwater Method
D5389-93R02 Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
D5390-93R02 Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes
D5391-99 Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
D5463-03 Guide for Use of Test Kits to Measure Inorganic Constituents in Water
D5464-93R01 Test Methods for pH Measurement of Water of Low Conductivity
D5540-94AR03 Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
D5541-94R03 Practice for Developing a Stage-Discharge Relation for Open Channel Flow
D5542-04 Test Methods for Trace Anions in High Purity Water by Ion Chromatography
D5543-94R05 Test Methods for Low-Level Dissolved Oxygen in Water
D5544-05 Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water
D5612-94R03 Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
D5810-96R01 Guide for Spiking into Aqueous Samples
D5851-95R00 Guide for Planning and Implementing a Water Monitoring Program
D5905-98R03 Practice for the Preparation of Substitute Wastewater
D5906-02 Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths
D5907-03 Test Method for Filterable and Nonfilterable Matter in Water
D5996-96R00 Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
D5997-96R00 Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
D6071-96R00 Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
D6091-03 Practice for 99 \%/95 \% Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
D6145-97R02 Guide for Monitoring Sediment in Watersheds
D6146-97R02 Guide for Monitoring Aqueous Nutrients in Watersheds
D6301-03 Practice for the Collection of Samples of Filterable and Nonfilterable Matter in Water
D6317-98R04 Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
D6318-03 Practice for Calibrating a Fathometer Using a Bar Check Method
D6326-98R03 Practice for The Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers
D6362-98R03 Practice for Certificates of Reference Materials for Water Analysis
D6501-04 Test Method for Phosphonate in Brines
D6502-99R03 Test Method for On-Line Measurement of Low Level Particulate and Dissolved Metals in Water by X-Ray Fluorescence (XRF)
D6504-00 Practice for On-Line Determination of Cation Conductivity in High Purity Water
D6512-03 Practice for Interlaboratory Quantitation Estimate
D6568-00 Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples
D6569-00 Test Method for On-Line Measurement of pH
D6581-00R05 Test Method for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Chemically Suppressed Ion Chromatography
D6689-01 Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
D6698-01 Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
D6764-02 Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
D6808-02 Practice for Competency Requirements of Reference Material Producers for Water Analysis
D6855-03 Test Method for Determination of Turbidity Below 5 NTU in Static Mode
F0660-83R02E01 Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
D0887-82R03E01 Practices for Sampling Water-Formed Deposits
D0932-85R02 Test Method for Iron Bacteria in Water and Water-Formed Deposits
D0933-84R03 Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
D0934-80R03 Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
D1141-98R03 Practice for the Preparation of Substitute Ocean Water
D1245-84R03 Practice for Examination of Water-Formed Deposits by Chemical Microscopy
D1252-00 Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
D1291-01 Practice for Estimation of Chlorine Requirement or Demand of Water, or Both
D1782-95R01 Test Methods for Operating Performance of Particulate Cation-Exchange Materials
D1783-01 Test Methods for Phenolic Compounds in Water
D1890-05 Test Method for Beta Particle Radioactivity of Water
D1943-96 Test Method for Alpha Particle Radioactivity of Water
D2035-80R03 Practice for Coagulation-Flocculation Jar Test of Water
D2036-98 Test Methods for Cyanides in Water
D2186-84R05 Test Methods for Deposit-Forming Impurities in Steam
D2187-94R04 Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins
D2330-02 Test Method for Methylene Blue Active Substances
D2331-80R03 Practices for Preparation and Preliminary Testing of Water-Formed Deposits
D2332-84R03 Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
D2460-97 Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water
D2579 Test Method for Total Organic Carbon in Water
D2580-94R01 Test Method for Phenols in Water by Gas-Liquid Chromatography
D2687-95R01 Practices for Sampling Particulate Ion-Exchange Materials
D2907 Test Methods for Microquantities of Uranium in Water by Fluorometry
D2908-91R01 Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
D3084-05 Practice for Alpha-Particle Spectrometry of Water
D3087-91R04 Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
D3113 Test Methods for Sodium Salts of EDTA in Water
D3263-03 Test Methods for Corrosivity of Solvent Systems for Removing Water-Formed Deposits
D3325-90R02E01 Practice for Preservation of Waterborne Oil Samples
D3326-90R02 Practice for Preparation of Samples for Identification of Waterborne Oils
D3328-00 Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
D3352-03E01 Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
D3371 Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography
D3375-95AR01 Test Method for Column Capacity of Particulate Mixed Bed IonExchange Materials
D3414-98R04 Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
D3415-98R04 Practice for Identification of Waterborne Oils
D3454-97 Test Method for Radium-226 in Water
D3483-83R05 Test Methods for Accumulated Deposition in a Steam Generator Tube
D3534 Test Method for Polychlorinated Biphenyls (PCBs) in Water
D3561-02 Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
D3590-02 Test Methods for Total Kjeldahl Nitrogen in Water
D3648-04 Practices for the Measurement of Radioactivity
D3649-98A Practice for High-Resolution Gamma-Ray Spectrometry of Water
D3650-93R99 Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis
D3651-02 Test Method for Barium in Brackish Water, Seawater, and Brines
D3694-96R04 Practices for Preparation of Sample Containers and for Preservation of Organic Constituents
D3695-95R01 Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
D3739-05 Practice for Calculation and Adjustment of the Langelier Saturation Index for Reverse Osmosis
D3861-91R03 Test Method for Quantity of Water-Extractable Matter in Membrane Filters
D3862-80R01 Test Method for Retention Characteristics of 0.2-|gmm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
D3863-87R03 Test Method for Retention Characteristics of 0.40 to 0.45-|gmm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
D3865-02 Test Method for Plutonium in Water
D3868-04 Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines
D3869-04 Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
D3871-84R03 Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
D3875-03 Test Method for Alkalinity in Brackish Water, Seawater, and Brines
D3921-96R03E01 Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
D3923-94R03E01 Practices for Detecting Leaks in Reverse Osmosis Devices
D3972-02 Test Method for Isotopic Uranium in Water by Radiochemistry
D3973-85R03 Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
D3974-81R03E01 Practices for Extraction of Trace Elements from Sediments
D3975-93R03 Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
D3976-92R01 Practice for Preparation of Sediment Samples for Chemical Analysis
D3977-97R02 Test Methods for Determining Sediment Concentration in Water Samples
D3986-02 Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
D4012-81R02 Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
D4025-97R03 Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
D4107-98R02E01 Test Method for Tritium in Drinking Water
D4128-01 Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry
D4129-98R03 Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
D4130-03 Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines
D4165-00 Test Method for Cyanogen Chloride in Water
D4193-02 Test Method for Thiocyanate in Water
D4194-03 Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
D4195-88R03 Guide for Water Analysis for Reverse Osmosis Application
D4196-05 Test Method for Confirming the Sterility of Membrane Filters
D4198-82R03 Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth
D4199-82R03 Test Methods for Autoclavability of Membrane Filters
D4200-82R03 Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters
D4201-96 Test Method for Coliphages in Water
D4249-83R98 Test Method for Enumeration of Candida albicans in Water
D4266-96R01 Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
D4281-95R01 Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination
D4282-02 Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
D4328-03 Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines
D4374-00 Test Methods for Cyanides in Water\MAutomated Methods for Total Cyanide, Acid dissociable Cyanide, and Thiocyanate
D4411-03 Guide for Sampling Fluvial Sediment in Motion
D4412-84R02 Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
D4454-85R02 Test Method for Simultaneous Enumeration of Total and Respiring Bacteria in Aquatic Systems by Microscopy
D4455-85R02 Test Method for Enumeration of Aquatic Bacteria by Epifluorescence Microscopy Counting Procedure
D4456-99 Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins
D4458-94R99 Test Method for Chloride Ions in Brackish Water, Seawater, and Brines
D4472-89R03 Guide for Recordkeeping for Reverse Osmosis Systems
D4489-95R01 Practices for Sampling of Waterborne Oils
D4515-85R01 Practice for Estimation of Holding Time for Water Samples Containing Organic Constituents
D4516-00 Practice for Standardizing Reverse Osmosis Performance Data
D4517-04 Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
D4520-03 Practice for Determining Water Injectivity Through the Use of On-Site Floods
D4548-91R02 Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
D4581-86R01 Guide for Measurement of Morphologic Characteristics of Surface Water Bodies
D4582-05 Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for Reverse Osmosis
D4657 Test Method for Polynuclear Aromatic Hydrocarbons in Water
D4692-01 Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO, SrSO, and BaSO) for Reverse Osmosis and Nanofiltration
D4698-92R01 Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
D4743 Test Method for Efficacy of Solvent Systems for Dissolving Water-Formed Deposits
D4744 Test Method for Organic Halides in Water by Carbon AdsorptionMicrocoulometric Detection
D4763-88R01 Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy
D4785-00A Test Method for Low-Level Iodine-131 in Water
D4822-88R03 Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
D4823-95R03E01 Guide for Core Sampling Submerged, Unconsolidated Sediments
D4839-03 Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
D4922-01 Test Method for Determination of Radioactive Iron in Water
D4962-02 Practice for NaI(Tl) Gamma-Ray Spectrometry of Water
D4983 Test Method for Cyclohexylamine, Morpholine, and Diethylaminoethanol in Water and Condensed Steam by Direct Aqueous Injection Gas Chromatography
D4993-89R03 Practice for Calculation and Adjustment of Silica (SiO) Scaling for Reverse Osmosis
D4994-89R02 Practice for Recovery of Viruses from Wastewater Sludges
D5037 Test Method for Comparison of Waterborne Petroleum Oils by High Performance Liquid Chromatography
D5042-90R04E01 Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins
D5072-98 Test Method for Radon in Drinking Water
D5073-02 Practice for Depth Measurement of Surface Water
D5074-90R03 Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
D5090-90R01 Practice for Standardizing Ultrafiltration Permeate Flow Performance Data
D5091-95R01 Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications
D5131-90R01 Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems
D5174-02 Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry
D5175-91R03 Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
D5176-91R03 Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
D5217-91R04 Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
D5241-92R04 Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water
D5244-92R04 Practice for Recovery of Enteroviruses from Waters
D5245-92R98 Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
D5246-92R04 Test Method for Isolation and Enumeration of from Water
D5256-00 Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
D5258-02 Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
D5259-92R00 Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
D5315-04 Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization
D5316-98R04 Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
D5317-98R03E01 Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
D5392-93R00 Test Method for Isolation and Enumeration of in Water by the Two-Step Membrane Filter Procedure
D5411-93R05E01 Practice for Calculation of Average Energy Per Disintegration (|$$|AmE) for a Mixture of Radionuclides in Reactor Coolant
D5412-93R00 Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
D5413-93R02 Test Methods for Measurement of Water Levels in Open-Water Bodies
D5462-02 Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
D5465-93R04 Practice for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
D5475-93R02 Test Method for Nitrogen- and Phosphorus-Containing Pesticides in Water by Gas Chromatography with a Nitrogen-Phosphorus Detector
D5613-94R03 Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers
D5614-94R03 Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs
D5615-95R01 Test Method for Operating Characteristics of Home Reverse Osmosis Devices
D5627-94R04 Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
D5640-95R03 Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water
D5673-03 Test Method for Elements in Water by Inductively Coupled Plasma\MMass Spectrometry
D5674-95R03 Guide for Operation of a Gaging Station
D5739-00 Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
D5765-95R01 Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating
D5788-95R01 Guide for Spiking Organics into Aqueous Samples
D5789 Practice for Writing Quality Control Specifications for Standard Test Methods for Organic Constituents
D5790-95R01 Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
D5811-00 Test Method for Strontium-90 in Water
D5812-96R02E01 Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography
D5847-02 Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
D5904-02 Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
D5916-96R02 Test Method for Detection and Enumeration of from Water and Extracted Sediments by Membrane Filtration (MF)
D6104-97R03 Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
D6156-97 Practice for Use of Reversed-Phase High Performance Liquid Chromatographic Systems
D6157-97R03 Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
D6161-98 Terminology Used for Crossflow Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes
D6238-98R03 Test Method for Total Oxygen Demand in Water
D6239-03 Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry
D6302-98R04 Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins
D6303-98 Test Method for Formaldehyde in Water
D6503-99 Test Method for Enterococci in Water Using Enterolert|Pt
D6508-00R05E01 Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
D6520-00 Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds
D6529-00 Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50\N1000 |gmS/cm
D6530-00 Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)
D6592-01 Test Method for Portable Chemiluminescent Water Quality Determination
D6696-01 Guide for Understanding Cyanide Species
D6697-01 Test Method for Determination for Chemical Oxygen Demand (Manganese III Oxygen Demand) of Water
D6734-01 Test Method for Low Levels of Coliphages in Water
D6800-02 Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
D6807-02 Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from2 to 100 |gmS/cm
D6850-03 Guide for QC of Screening Methods in Water
D6888-04 Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
D6889-03 Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
D6908-03 Practice for Integrity Testing of Water Filtration Membrane Systems
D6919-03 Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
D6994-04 Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
D7066-04 Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
F0316-03 Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
F0488 Test Method for On-Site Screening of Heterotrophic Bacteria in Water
F0838-05 Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration
Volume 11.03, October 2005
Atmospheric Analysis; Occupational Health and Safety; Protective Clothing
D1356-05 Terminology Relating to Sampling and Analysis of Atmospheres
D1357-95R05 Practice for Planning the Sampling of the Ambient Atmosphere
D1607-91R00E01 Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)
D1608-98R03 Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures)
D1739-98R04 Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
D1914-95R04E01 Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
D2010_D2010M-98R04 Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
D2913-96R01E01 Test Method for Mercaptan Content of the Atmosphere
D2914-01 Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
D2986 Practice for Evaluation of Air Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
D3154-00 Test Method for Average Velocity in a Duct (Pitot Tube Method)
D3162-94R00E01 Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
D3195-90R04 Practice for Rotameter Calibration
D3249-95R00 Practice for General Ambient Air Analyzer Procedures
D3266-91R00E01 Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
D3267-91R05 Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
D3268-91R00E01 Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
D3269-96R01E01 Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Manual Procedures)
D3270-00 Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
D3464-96R01 Test Method for Average Velocity in a Duct Using a Thermal Anemometer
D3608-95R00E01 Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction
D3609-00 Practice for Calibration Techniques Using Permeation Tubes
D3614-97R02E01 Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
D3631-99R04 Test Methods for Measuring Surface Atmospheric Pressure
D3670-91R01 Guide for Determination of Precision and Bias of Methods of Committee D22
D3685_D3685M-98R05 Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
D3686-95R01E01 Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
D3687-01 Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
D3796-90R04 Practice for Calibration of Type S Pitot Tubes
D3824-95R00 Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method
D4096-91R03 Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High\NVolume Sampler Method)
D4185-96R01E01 Practice for Measurement of Metals in Workplace Atmosphere by Flame Atomic Absorption Spectrophotometry
D4230-02E01 Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
D4298-04 Guide for Intercomparing Permeation Tubes to Establish Traceability
D4323-84R03 Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
D4413-98R03 Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology)
D4430-00E01 Practice for Determining the Operational Comparability of Meteorological Measurements
D4490-96R01E01 Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
D4532-97R03 Test Method for Respirable Dust in Workplace Atmospheres
D4597-03 Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
D4599-03 Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
D4600-95R00E01 Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
D4765-03 Test Method for Fluorides in Workplace Atmospheres
D4766-98R03 Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)
D4856-99R04 Test Method for Determination of Sulfuric Acid Mist in the Workplace Atmosphere (Ion Chromatographic)
D4861-05 Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air
D4913-00 Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
D4947-05 Test Method for Chlordane and Heptachlor Residues in Indoor Air
D5011-92R03 Practices for Calibration of Ozone Monitors Using Transfer Standards
D5012-01 Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
D5014-94R00E01 Test Method for Measurement of Formaldehyde in Indoor Air (Passive Sampler Methodology)
D5015-02 Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
D5075-01 Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
D5085-02 Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
D5086-01 Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
D5096-02 Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer
D5110-98R04 Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
D5111-99 Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations
D5116-97 Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products
D5149-02 Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
D5156-02 Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
D5157-97R03E01 Guide for Statistical Evaluation of Indoor Air Quality Models
D5197-03 Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)
D5280-96R01 Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
D5281-98R05 Test Method for Collection and Analysis of Hexavalent Chromium in Ambient Atmospheres
D5337-04 Practice for Flow Rate Calibration of Personal Sampling Pumps
D5366-96R02E01 Test Method for Determining the Dynamic Performance of a Wind Vane
D5438-05 Practice for Collection of Floor Dust for Chemical Analysis
D5466-01 Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology)
D5527-00R02E01 Practices for Measuring Surface Wind and Temperature by Acoustic Means
D5578-04 Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
D5741-96R02E01 Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer
D5755-03 Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
D5756-02 Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Surface Loading
D5791-95R01 Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
D5835-95R01 Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
D5836-03 Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)
D5932-96R02 Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
D5952-02 Guide for Inspecting Water Systems for Legionellae and Investigating Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever)
D5953M-96R01 Test Method for Determination of Non-Methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection Method \[Metric\]
D5955-02 Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
D6011-96R03 Test Method for Determining the Performance of a Sonic Anemometer/Thermometer
D6056-96R01 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy
D6057-96R01E01 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
D6058-96R01 Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
D6059-96R01 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
D6060-96R01 Practice for Sampling of Process Vents with a Portable Gas Chromatograph
D6061-01 Practice for Evaluating the Performance of Respirable Aerosol Samplers
D6062M-96R01 Guide for Personal Samplers of Health-Related Aerosol Fractions \[Metric\]
D6176-97R03 Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
D6177-97R03 Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets
D6178-97R03 Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
D6196-03 Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air
D6209-98R04 Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
D6216-03 Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
D6245-98R02 Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
D6246-02 Practice for Evaluating the Performance of Diffusive Samplers
D6271-04 Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol
D6281-04 Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
D6306-98R03 Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
D6327-98R04 Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
D6328-98 Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition
D6329-98R03 Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
D6330-98R03 Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions
D6331-98R05 Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
D6332-99R05 Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
D6333-98R04E01 Practice for Collection of Dislodgeable Pesticide Residues from Floors
D6345-98R04E01 Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
D6348-03 Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
D6363-98R03E01 Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
D6399-04 Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins
D6420-99R04 Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
D6480-05 Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy
D6485-99R04 Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
D6494-99R04E01 Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
D6522-00 Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using
Portable Analyzers
D6552-00 Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
D6561-00 Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2\Nphenyl-1) Piperazine (MOPIP) in the Workplace
D6562-00 Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
D6589-00 Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance
D6620-00 Practice for Asbestos Detection Limit Based on Counts
D6669-01A Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints
D6670-01 Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
D6735-01 Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources\MImpinger Method
D6784-02 Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
D6785-02 Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
D6803-02 Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers
D6830-02 Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media
D6831-05 Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
D6832-02 Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide
D6877-03 Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
D6966-03 Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
D7034-05 Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
D7035-04 Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D7036-04 Practice for Competence of Air Emission Testing Bodies
D7049-04 Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres
D7143-05 Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products
D7144-05 Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
D7145-05 Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
E0104-02 Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
E0337-02 Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
E1132-99A Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
E1302-00 Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids
E1370-96R02 Guide for Air Sampling Strategies for Worker and Workplace Protection
E1435-98 Practice for Handling Densified Articles of Aluminum Oxide Reinforced with Silicon Carbide Whiskers
E1437-98 Practice for Handling Silicon Carbide Whiskers
E1451-98 Guide for Disposal of Wastes Containing Silicon Carbide Whiskers and Fibers
E1497-00 Practice for Safe Use of Water-Miscible Metalworking Fluids
E1516-98 Guide for Packaging of Unbound Respirable Silicon Carbide Whiskers
E1542-93R04 Terminology Relating to Occupational Health and Safety
E1575-98 Practice for Pressure Water Cleaning and Cutting
E1576-99 Guide for Medical Surveillance Program for Workers with Occupational Exposure to Airborne Silicon Carbide Whiskers and Fibers
E1628-94R00 Practice for Preparing Material Safety Data Sheets to Include Transportation and Disposal Data for the General Services Administration
E1687-04 Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids
E1716 Guide for Selection and Use of Personal Protective Equipment for Humans Working With Respirable Silicon Carbide Whiskers
E1717 Guide for Personnel Training for Health and Safety Aspects of Working in Environments Containing Respirable Silicon Carbide Whiskers
E1718-95R04 Guide for Administrative and Engineering Controls for Silicon Carbide Whisker Work Areas
E1972-04 Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment
E2144-01 Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
E2148-03 Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
E2169-01 Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids
E2238-02 Guide for Evacuation Route Diagrams
E2250-02 Method for Determination of Endotoxin Concentration in Water Miscible Metal Working Fluids
E2349-05 Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing
F0739-99A Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Continuous Contact
F0778-88R01 Methods for Gas Flow Resistance Testing of Filtration Media
F0903-03R04 Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
F0955-03 Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances
F1001-99A Guide for Selection of Chemicals to Evaluate Protective Clothing Materials
F1002-05 Performance Specification for Protective Clothing for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards
F1040-87R01 Specification for Filter Units, Air Conditioning: Viscous-Impingement and Dry Types, Replaceable
F1052-97R02 Test Method for Pressure Testing Vapor Protective Ensembles
F1060-05 Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact
F1154-99AR04 Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Integrity of Chemical-Protective Suit Ensembles
F1186-03 Classification System for Chemicals According to Functional Groups
F1194-99R05 Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing
F1291-04 Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
F1296-03 Guide for Evaluating Chemical Protective Clothing
F1301-90R01 Practice for Labeling Chemical Protective Clothing
F1342-05 Test Method for Protective Clothing Material Resistance to Puncture
F1358-00R05 Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
F1359-99AR04 Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin
F1383-99A Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Intermittent Contact
F1407-99A Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation\MPermeation Cup Method
F1414-04 Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing
F1449-01 Guide for Care and Maintenance of Flame, Thermal and Arc Resistant Clothing
F1458-04 Test Method for Measurement of Cut Resistance to Chain Saw of Foot Protective Devices
F1461-93R05E01 Practice for Chemical Protective Clothing Program
F1471-93R01 Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air Filter System
F1494-03 Terminology Relating to Protective Clothing
F1670-03 Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
F1671-03 Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
F1731-96R02 Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing
F1790-05 Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing
F1818-04 Specification for Foot Protection for Chain Saw Users
F1819-04 Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
F1862-00A Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)
F1868-02 Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
F1897-04 Specification for Leg Protection for Chain Saw Users
F1930-00 Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash Fire Simulations Using an Instrumented Manikin
F1939-99A Test Method for Radiant Protective Performance of Flame Resistant Clothing Materials
F2010-00R05 Test Method for Evaluation of Glove Effects on Wearer Hand Dexterity Using a Modified Pegboard Test
F2053-00 Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials
F2061-00 Practice for Chemical Protective Clothing Care and Maintenance Instructions
F2100-04 Specification for Performance of Materials Used in Medical Face Masks
F2101-01 Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus
F2130-01 Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials
F2298-03 Test Methods for Water Vapor Diffusion Resistance and Air Flow Resistance of Clothing Materials Using the Dynamic Moisture Permeation Cell
F2299-03 Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
F2300-05 Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing
F2302-03 Performance Specification for Labeling Protective Clothing as Heat and Flame Resistant
Volume 11.04, September 2005
Environmental Assessment; Hazardous Substances and Oil Spill Responses; Waste Management
D3987-85R04 Test Method for Shake Extraction of Solid Waste with Water
D4447-84R03 Guide for Disposal of Laboratory Chemicals and Samples
D4448-01 Guide for Sampling Ground-Water Monitoring Wells
D4503-86R03 Practice for Dissolution of Solid Waste by Lithium Metaborate Fusion
D4547-03 Guide for Sampling Waste and Soils for Volatile Organic Compounds
D4646-03 Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
D4687-95R01 Guide for General Planning of Waste Sampling
D4793-93R04 Test Method for Sequential Batch Extraction of Waste with Water
D4842-90R01 Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
D4843-88R04E01 Test Method for Wetting and Drying Test of Solid Wastes
D4844-03 Guide for Air Monitoring at Waste Management Facilities for Worker Protection
D4874-95R01 Test Method for Leaching Solid Material in a Column Apparatus
D4978-95R01 Test Methods for Screening of Reactive Sulfides in Waste
D4979-95R03 Test Method for Physical Description Screening Analysis in Waste
D4980-89R03 Test Methods for Screening of pH in Waste
D4981-95R03 Test Method for Screening of Oxidizers in Waste
D4982-95R01 Test Methods for Flammability Potential Screening Analysis of Waste
D5013-89R03 Practices for Sampling Wastes from Pipes and Other Point Discharges
D5050-96R02 Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts
D5057-90R01 Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
D5058-90R01 Test Methods for Compatibility of Screening Analysis of Waste
D5115-90R04 Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF
D5120-90R04 Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process
D5177 Guide for Waste Acceptance at Hazardous Waste Incinerators
D5198-92R03 Practice for Nitric Acid Digestion of Solid Waste
D5231-92R03 Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
D5232-92R03 Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
D5233-92R04 Test Method for Single Batch Extraction Method for Wastes
D5283-92R03 Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
D5284-93R04E01 Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid
D5285-03 Test Method for 24-Hour Batch-Type Measurement of Volatile Organic Sorption by Soils and Sediments
D5358-93R03 Practice for Sampling with a Dipper or Pond Sampler
D5359-98R04 Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber
D5368-93R01 Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
D5369-93R03 Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction
D5370-96R02 Specification for Pozzolanic Blended Materials in Construction Applications
D5451-93R04 Practice for Sampling Using a Trier Sampler
D5468-02 Test Method for Gross Calorific and Ash Value of Waste Materials
D5495-03 Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
D5513-99R04 Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
D5530-94R03 Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
D5633-04 Practice for Sampling with a Scoop
D5658-95R01 Practice for Sampling Unconsolidated Waste From Trucks
D5659-95R01 Test Method for Chlorophenoxy Acid Herbicides in Waste Using HPLC
D5660-96R04 Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Water and Soil Using a Toxicity Test with a Luminescent Marine Bacterium
D5679-95AR01 Practice for Sampling Consolidated Solids in Drums or Similar Containers
D5680-95AR01 Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
D5681-98AR04 Terminology for Waste and Waste Management
D5743-97R03 Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers
D5744-96R01 Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell
D5745-95R05 Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation
D5746-98R02 Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities
D5759-95R05 Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
D5792-02 Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
D5829-96R01 Guide for Preparing a Training Program for Environmental Analytical Laboratories
D5830-95R01 Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
D5831-03 Test Method for Screening Fuels in Soils
D5839-96R01 Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
D5928-96R03 Test Method for Screening of Waste for Radioactivity
D5929-96R04 Test Method for Determining Biodegradability of Materials Exposed to Municipal Solid Waste Composting Conditions by Compost Respirometry
D5956-96R01 Guide for Sampling Strategies for Heterogeneous Wastes
D5975-96R04 Test Method for Determining the Stability of Compost by Measuring Oxygen Consumption
D6008-96R05 Practice for Conducting Environmental Baseline Surveys
D6009-96R01 Guide for Sampling Waste Piles
D6010-96R01 Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices
D6044-96R03 Guide for Representative Sampling for Management of Waste and Contaminated Media
D6050-97R03E01 Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
D6051-96R01 Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
D6052-97R03 Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
D6063-96R01 Guide for Sampling of Drums and Similar Containers by Field Personnel
D6232-03 Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities
D6233-98R03 Guide for Data Assessment for Environmental Waste Management Activities
D6234-98R02 Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
D6250-98R03 Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions
D6270-98R04 Practice for Use of Scrap Tires in Civil Engineering Applications
D6311-98R03 Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
D6323-98R03 Guide for Laboratory Subsampling of Media Related to Waste Management Activities
D6346-98R04 Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs
D6418-04 Practice for Using the Disposable En Core Sampler for Sampling and Storing Soil for Volatile Organic Analysis
D6498-99R02 Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations
D6538-00 Guide for Sampling Wastewater With Automatic Samplers
D6582-00 Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
D6597-00 Practice for Assessment of Attaining Clean Up Level for Site Closure
D6640-01R05 Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
D6661-01 Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
D6699-01 Practice for Sampling Liquids Using Bailers
D6700-01 Practice for Use of Scrap Tire-Derived Fuel
D6759-02 Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
D6842-02E01 Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making
D6907-05E01 Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers
D6956-03 Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
D6982-03 Practice for Detecting Hot Spots and Buried Objects Using Point-Net (Grid) Search Patterns
E0688-94R99 Test Methods for Waste Glass as a Raw Material for Glass Manufacturing
E0701-80R05 Test Methods for Municipal Ferrous Scrap
E0702-85R05 Specification for Municipal Ferrous Scrap
E0708-79R99 Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
E0711-87R04 Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
E0775-87R04 Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
E0776-87R04 Test Method for Forms of Chlorine in Refuse-Derived Fuel
E0777-87R04 Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
E0778-87R04 Test Methods for Nitrogen in the Analysis Sample of Refuse-Derived Fuel
E0790-87R04 Test Method for Residual Moisture in a Refuse-Derived Fuel Analysis Sample
E0791-90R04 Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
E0828-81R04 Test Method for Designating the Size of RDF-3 From its Sieve Analysis
E0830-87R04 Test Method for Ash in the Analysis Sample of Refuse-Derived Fuel
E0850-95R02 Practice for Use of Inorganic Process Wastes as Structural Fill
E0856-83R04 Definitions of Terms and Abbreviations Relating to Physical and Chemical Characteristics of Refuse Derived Fuel
E0868-82R05 Test Methods for Conducting Performance Tests on Mechanical Conveying Equipment Used in Resource Recovery Systems
E0884-82R01 Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities
E0885-88R04 Test Methods for Analyses of Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy
E0887-88R04 Test Method for Silica in Refuse-Derived Fuel (RDF) and RDF Ash
E0889-82R04 Test Method for Composition or Purity of a Solid Waste Materials Stream
E0897-88R04 Test Method for Volatile Matter in the Analysis Sample of Refuse-Derived Fuel
E0929-83R05 Test Method for Measuring Electrical Energy Requirements of Processing Equipment
E0949-88R04 Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample
E0953-88R04 Test Method for Fusibility of Refuse-Derived Fuel (RDF) Ash
E0955-88R04 Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples
E0956-83R05 Classification for Municipal-Mixed Nonferrous Metals (MNM)
E0959-83R05 Test Method for Characterizing the Performance of Refuse Size-Reduction Equipment
E1037-84R04 Test Method for Measuring Particle Size Distribution of RDF-5
E1076-85R05 Practice for Maintaining Health and Safety Records at Solid Waste Processing Facilities
E1107-86R04 Test Method for Measuring the Throughput of Resource-Recovery Unit Operations
E1108-86R04 Test Method for Determination of the Recovery of a Product in a Materials Separation Device
E1109-86R04 Test Method for Determining the Bulk Density of Solid Waste Fractions
E1183-87R04 Test Method for Air Drying RDF-5 for Further Analysis
E1248-90R04 Practice for Shredder Explosion Protection
E1266-88R05 Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
E1527-00 Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process
E1528-00 Practice for Environmental Site Assessments: Transaction Screen Process
E1609-01 Guide for Development and Implementation of a Pollution Prevention Program
E1739-95R02 Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites
E1752-95R00E01 Guide for Collection of Multi-Media Field Emission and Discharge Data Associated with Glycol Dehydration Units
E1861 Guide for Use of Coal Combustion By-Products in Structural Fills
E1903-97R02 Guide for Environmental Site Assessments: Phase II Environmental Site Assessment Process
E1912-98R04 Guide for Accelerated Site Characterization for Confirmed or Suspected Petroleum Releases
E1929-98 Practice for Assessment of Certification Programs for Environmental Professionals: Accreditation Criteria
E1943-98R04 Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites
E1983-98 Guide for Assessment of Wetland Functions
E1984-03 Guide for Brownfields Redevelopment
E1990-98R05 Guide for Performing Evaluations of Underground Storage Tank Systems for Operational Conformance with 40 CFR, Part 280 Regulations
E2018-01 Guide for Property Condition Assessments: Baseline Property Condition Assessment Process
E2060-00 Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes
E2081-00R04E01 Guide for Risk-Based Corrective Action
E2091-05 Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls
E2107-00 Practice for Environmental Regulatory Compliance Audits
E2137-01 Guide for Estimating Monetary Costs and Liabilities for Environmental Matters
E2173-01 Guide for Disclosure of Environmental Liabilities
E2201-02A Terminology for Coal Combustion Products
E2205-02 Guide for Risk-Based Corrective Action for Protection of Ecological Resources
E2243-02 Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation
E2247-02 Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process for Forestland or Rural Property
E2256-03 Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms for Petroleum Service
E2277-03 Guide for Design and Construction of Coal Ash Structural Fills
E2278-04 Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage
E2318-03 Guide for Environmental Health Site Assessment Process for Military Deployments
F0625-94R00 Practice for Classifying Water Bodies for Spill Control Systems
F0631-99 Guide for Collecting Skimmer Performance Data in Controlled Environments
F0715-95R02 Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
F0716-82R01 Test Methods for Sorbent Performance of Absorbents
F0726-99 Test Method for Sorbent Performance of Adsorbents
F0818-93R03 Terminology Relating to Spill Response Barriers
F0873-84R03 Guide for Incinerating Oil Spill Wastes at Temporary Field Locations
F0962-04 Specification for Oil Spill Response Boom Connection: Z-Connector
F1011-86R01 Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel
F1084-90R02 Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
F1093-99 Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom
F1127-01 Guide for Containment by Emergency Response Personnel of Hazardous Material Spills
F1129-01 Guide for Using Aqueous Foams to Control the Vapor Hazard from Immiscible Volatile Liquids
F1209-89R99 Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs
F1210-89R99 Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies
F1231-89R99 Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks
F1279-90R99 Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Permeable Surfaces
F1280-90R99 Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Impermeable Surfaces
F1413-92R99 Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems
F1460-93R99 Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems
F1481-94R01 Guide for Ecological Considerations for the Use of Bioremediation in Oil Spill Response\MSand and Gravel Beaches
F1522-95R01 Guide for Use of the Steam Stripping Process in Mitigating Chemical Spills
F1523-94R01 Guide for Selection of Booms in Accordance With Water Body Classifications
F1524-95R01 Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills
F1525-96R01 Guide for Use of Membrane Technology in Mitigating Hazardous Chemical Spills
F1599-95R03 Guide for Collecting Performance Data on Temporary Storage Devices
F1600-95AR01 Terminology Relating to Bioremediation
F1607-95R03 Guide for Reporting of Test Performance Data for Oil Spill Response Pumps
F1644-01 Guide for Health and Safety Training of Oil Spill Responders
F1656-01 Guide for Health and Safety Training of Oil Spill Responders in the United States
F1657-96R02 Practice for Emergency Joining of Booms with Incompatible Connectors
F1686-97R03 Guide for Surveys to Document and Assess Oiling Conditions on Shorelines
F1687-97R03 Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines
F1693-96R03 Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land
F1737-96R99 Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems
F1738-96R99 Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants
F1778-97R02 Guide for Selection of Skimmers for Oil-Spill Response
F1779-97R03 Practice for Reporting Visual Observations of Oil on Water
F1780-97R02 Guide for Estimating Oil Spill Recovery System Effectiveness
F1788-97R03 Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
F1834-98R04 Guide for Consideration of Anaerobic Bioremediation as a Chemical Pollutant Mitigation Method on Land
F1872-98 Guide for Use of Chemical Shoreline Cleaning Agents: Environmental and Operational Considerations
F1990-99 Guide for In-Situ Burning of Spilled Oil: Ignition Devices
F2008-00 Guide for Qualitative Observations of Skimmer Performance
F2059-00 Test Method for Laboratory Oil Spill Dispersant Effectiveness Using The Swirling Flask
F2067-00 Practice for Development and Use of Oil-Spill Trajectory Models
F2084-01 Guide for Collecting Containment Boom Performance Data in Controlled Environments
F2152-01 Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
F2204-02 Guide for Describing Shoreline Response Techniques
F2205-02 Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response: Tropical Environments
F2230-02 Guide for In-situ Burning of Oil Spills on Water: Ice Conditions
F2327-03 Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water
F2438-04 Specification for Oil Spill Response Boom Connection: Slide Connector
F2464-05 Guide for Cleaning of Various Oiled Shorelines and Habitats
Volume 11.05, August 2005
Biological Effects and Environmental Fate; Biotechnology; Pesticides
D2667-95R01 Test Method for Biodegradability of Alkylbenzene Sulfonates
D3092 Test Method for Particle-Size Distribution of Space-Insecticide Aerosol
D3696-00 Practice for Evaluating an Effluent for Flavor Impairment to Fish Flesh
D3731-87R04 Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
D3946 Test Method for Evaluating the Bacteria Resistance of Water-Dilutable Metalworking Fluids
D3978-04 Practice for Algal Growth Potential Testing with
D4131-84R05 Practice for Sampling Fish with Rotenone
D4132-82R04 Practice for Sampling Phytoplankton with Conical Tow Nets
D4133-82R04 Practice for Sampling Phytoplankton with Pumps
D4134-82R04 Practice for Sampling Phytoplankton with a Clarke-Bumpus Plankton Sampler
D4135-82R04 Practice for Sampling Phytoplankton With Depth-Integrating Samplers
D4136-82R04 Practice for Sampling Phytoplankton with Water-Sampling Bottles
D4137-82R04 Practice for Preserving Phytoplankton Samples
D4148-82R04 Test Method for Analysis of Phytoplankton in Surface Water by the Sedgwick-Rafter Method
D4149-82R04 Classification for Sampling Phytoplankton in Surface Waters
D4211-82R04 Classification for Fish Sampling
D4342 Practice for Collecting of Benthic Macroinvertebrates with Ponar Grab Sampler
D4343 Practice for Collecting Benthic Macroinvertebrates with Ekman Grab Sampler
D4344 Practice for Collecting Benthic-Macroinvertebrates with Smith-McIntyre Grab Sampler
D4345 Practice for Collecting Benthic Macroinvertebrates with Van Veen Grab Sampler
D4346 Practice for Collecting Benthic Macroinvertebrates with Okean 50 Grab Sampler
D4347 Practice for Collecting Benthic Macroinvertebrates with Shipek (Scoop) Grab Sampler
D4348 Practice for Collecting Benthic Macroinvertebrates with Holme (Scoop) Grab Sampler
D4387 Guide for Selecting Grab Sampling Devices for Collecting Benthic Macroinvertebrates
D4401 Practice for Collecting Benthic Macroinvertebrates With Petersen Grab Sampler
D4407 Practice for Collecting Benthic Macroinvertebrates With Orange Peel Grab Sampler
D4556 Guide for Selecting Stream-Net Sampling Devices for Collecting Benthic Macroinvertebrates
D4557 Practice for Collecting Benthic Macroinvertebrates with Surber and Related Type Samplers
D4558 Practice for Collecting Benthic Macroinvertebrates With Drift Nets
E0549-87R02 Guide for Preparing Field Sprayer Calibration Procedures
E0550-87R02 Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures
E0609-05 Terminology Relating to Pesticides
E0640-78R98 Test Method for Preservatives in Water-Containing Cosmetics
E0641-01 Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
E0642-91R02 Practice for Determining Application Rates and Distribution Patterns from Aerial Application Equipment
E0645-02A Test Method for Efficacy of Microbicides Used in Cooling Systems
E0652-91R03 Test Method for Nonresidual Liquid Household Insecticides Against Flying Insects
E0653-91R03 Test Method for Effectiveness of Aerosol and Pressurized Space Spray Insecticides Against Flying Insects
E0654-96R03 Test Method for Effectiveness of Aerosol and Pressurized Spray Insecticides Against Cockroaches
E0686 Method for Evaluation of Antimicrobial Agents in Aqueous Metal Working Fluids
E0723-97R02 Test Method for Efficacy of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper Industry (Bacterial Spoilage)
E0724-98R04 Guide for Conducting Static Acute Toxicity Tests Starting with Embryos of Four Species of Saltwater Bivalve Molluscs
E0725-96R01 Test Method for Sampling Granular Carriers and Granular Pesticides
E0726-01 Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
E0727-02 Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
E0728-91R04E01 Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
E0729-96R02 Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians
E0758-98R02 Test Method for Mammalian Acute Percutaneous Toxicity
E0857-87R97 Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species
E0869-93R98 Test Method for Performance Evaluation of Fuel Ethanol Manufacturing Facilities
E0870-82R98E01 Test Methods for Analysis of Wood Fuels
E0871-82R98 Method for Moisture Analysis of Particulate Wood Fuels
E0872-82R98 Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
E0873-82R98 Test Method for Bulk Density of Densified Particulate Biomass Fuels
E0875-00 Test Method for Efficacy of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry
E0895-89R01 Practice for Determination of Hydrolysis Rate Constants of Organic Chemicals in Aqueous Solutions
E0896-92R97 Test Method for Conducting Aqueous Direct Photolysis Tests
E0938-05 Test Method for Effectiveness of Liquid, Gel, or Cream Insecticides Against Adult Human Lice
E0939-94R00 Test Method of Field Testing Topical Applications of Compounds as Repellents for Medically Important and Pest Arthropods (Including Insects, Ticks, and Mites):I Mosquitoes
E0943-04A Terminology Relating to Biological Effects and Environmental Fate
E0951-94R00 Test Methods for Laboratory Testing of Non-Commercial Mosquito Repellent Formulations On the Skin
E0978 Practice for Evaluating Mathematical Models for the Environmental Fate of Chemicals
E0979-91R04 Test Method for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids
E0981-04 Test Method for Estimating Sensory Irritancy of Airborne Chemicals
E0993-01 Test Method for Evaluation of Delayed Contact Hypersensitivity
E1022-94R02 Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks
E1023-84R02 Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses
E1052-96R02 Test Method for Efficacy of Antimicrobial Agents Against Viruses in Suspension
E1053-97R02 Test Method for Efficacy of Virucidal Agents Intended for Inanimate Environmental Surfaces
E1054-02 Test Methods for Evaluation of Inactivators of Antimicrobial Agents
E1055-99R03 Test Method for Evaluation of Eye Irritation in Albino Rabbits
E1058-02 Practice for the Toxic Contamination of the Environment in the Operator Enclosure of Self-Propelled Agriculture Vehicles
E1073-01R05 Test Method for Obtaining a Pharmacological Profile with Mice
E1102-91R02 Terminology Relating to Agricultural Chemical\t Application
E1103-96R04E01 Test Method for Determining Subchronic Dermal Toxicity
E1115-02 Test Method for Evaluation of Surgical Hand Scrub Formulations
E1116-98R02 Test Method for Emulsification Characteristics of Pesticide Emulsifiable Concentrates
E1117-97 Practice for Design of Fuel-Alcohol Manufacturing Facilities
E1126 Terminology Relating to Biomass Fuels
E1147-92R97 Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography
E1148-02 Test Method for Measurements of Aqueous Solubility
E1153-03 Test Method for Efficacy of Sanitizers Recommended for Inanimate Non-Food Contact Surfaces
E1163-98R02 Test Method for Estimating Acute Oral Toxicity in Rats
E1173-01E01 Test Method for Evaluation of Preoperative, Precatheterization, or Preinjection Skin Preparations
E1174-00 Test Method for Evaluation of the Effectiveness of Health Care Personnel or Consumer Handwash Formulations
E1191-03A Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
E1192-97R03 Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians
E1193-97R04 Guide for Conducting Life-Cycle Toxicity Tests
E1194-01 Test Method for Vapor Pressure
E1195-01 Test Method for Determining a Sorption Constant (Koc) for an Organic Chemical in Soil and Sediments
E1197-87R04 Guide for Conducting a Terrestrial Soil-Core Microcosm Test
E1198-87R04 Practice for Sampling Zooplankton with Pumps
E1199-87R04 Practice for Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler
E1200-87R04 Practice for Preserving Zooplankton Samples
E1201-87R04 Practice for Sampling Zooplankton with Conical Tow Nets
E1203-98R04 Practice for Using Brine Shrimp Nauplii as Food for Test Animals in Aquatic Toxicology
E1218-04 Guide for Conducting Static Toxicity Tests with Microalgae
E1241-98R04 Guide for Conducting Early Life-Stage Toxicity Tests with Fishes
E1242-97R03 Practice for Using Octanol-Water Partition Coefficient to Estimate Median Lethal Concentrations for Fish Due to Narcosis
E1259-01 Test Method for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390|SDC
E1279-89R01 Test Method for Biodegradation By a Shake-Flask Die-Away Method
E1285-01 Guide for Identification of Bacteriophage Lambda (|gl) or Its DNA
E1286-00 Guide for Identification of Herpes Simplex Virus or Its DNA
E1287-89R99 Practice for Aseptic Sampling of Biological Materials
E1288 Test Method for The Durability of Biomass Pellets
E1291-99R03 Test Method for Conducting a Saturated Vapor Inhalation Study with Rats
E1294-89R99 Test Method for Pore Size Characteristics of Membrane Filters Using Automated Liquid Porosimeter
E1295-01 Guide for Conducting Three-Brood, Renewal Toxicity Tests with
E1298-89R00 Guide for Determination of Purity, Impurities, and Contaminants in Biological Drug Products
E1326-98 Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
E1327-90R00 Test Method for Evaluation of Health Care Personnel Handwash Formulations by Utilizing Fingernail Regions
E1342-97R02 Practice for Preservation by Freezing, Freeze-Drying, and Low Temperature Maintenance of Bacteria, Fungi, Protista, Viruses, Genetic Elements, and Animal and Plant Tissues
E1343-90R01 Test Method for Molecular Weight Cutoff Evaluation of Flat Sheet Ultrafiltration Membranes
E1344-90R97E01 Guide for Evaluation of Fuel Ethanol Manufacturing Facilities
E1357-90R01 Test Method for Determining the Rate of Bioleaching of Iron From Pyrite by
E1358-97 Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
E1366-02 Practice for Standardized Aquatic Microcosms: Fresh Water
E1367-03E01 Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates
E1372-95R03 Test Method for Conducting a 90-Day Oral Toxicity Study in Rats
E1373-01 Test Method for Conducting a Subchronic Inhalation Toxicity Study in Rats
E1391-03 Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates
E1415-91R04 Guide for Conducting Static Toxicity Tests With G3
E1427-00E01 Guide for Selecting Test Methods to Determine the Effectiveness of Antimicrobial Agents and Other Chemicals for the Prevention, Inactivation and Removal of Biofilm
E1428-99R04 Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by (A Pink Stain Organism)
E1429-91R04 Guide for Assessing the Health Hazard of Pesticides to Applicators and Others with Potential Exposure
E1439-98R04 Guide for Conducting the Frog Embryo Teratogenesis Assay-Xenopus (FETAX)
E1440-91R04 Guide for Acute Toxicity Test with the Rotifer Brachionus
E1463-92R04 Guide for Conducting Static and Flow-Through Acute Toxicity Tests With Mysids From the West Coast of the United States
E1468 Practice for Collecting Benthic Macroinvertebrates with the Basket Sampler
E1469 Practice for Collecting Benthic Macroinvertebrates with Multiple-Plate Samplers
E1470-92R98 Test Method for Characterization of Proteins by Electrophoretic Mobility
E1482-04 Test Method for Neutralization of Virucidal Agents in Virucidal Efficacy Evaluations
E1483-92R04 Test Method for Assessing Developmental Toxicity in Rats and Rabbits
E1493-01 Guide for Identification of Bacteriophage M13 or Its DNA
E1498-92R04 Guide for Conducting Sexual Reproduction Tests with Seaweeds
E1517-99 Test Method for Determining the Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Human Louse Ova
E1518-99 Practice for Evaluation of Physical Compatibility of Pesticides in Aqueous Tank Mixtures by the Dynamic Shaker Method
E1519-05 Terminology Relating to Agricultural Tank Mix Adjuvants
E1520-99R04 Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
E1521-01 Test Method for Liquid Holding Capacity of Granular Carriers
E1525-02 Guide for Designing Biological Tests with Sediments
E1531-00 Practice for Detection of Mycoplasma Contamination of Cell Cultures by Growth on Agarose Medium
E1532-00 Practice for Indirect Detection of Mycoplasma in Cell Culture by DNA Binding with Bisbenzamide Fluorochrome Stain
E1533-00 Practice for Indirect Detection of Mycoplasma in Cell Culture by 4`-6-Diamidino-2-2 Phenylindole (DAPI) Staining
E1534-93R98 Test Method for Determination of Ash Content of Particulate Wood Fuels
E1535-93R98 Test Method for Performance Evaluation of Anaerobic Digestion Systems
E1536-00 Practice for Detection of Mycoplasma Contamination of Bovine Serum by the Large Volume Method
E1562-00 Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids
E1563-98R04 Guide for Conducting Static Acute Toxicity Tests with Echinoid Embryos
E1564-00 Guide for Design and Maintenance of Low-Temperature Storage Facilities for Maintaining Cryopreserved Biological Materials
E1565-00 Guide for Inventory Control and Handling of Biological Material Maintained at Low Temperatures
E1566-00 Guide for Handling Hazardous Biological Materials in Liquid Nitrogen
E1567-93R01 Guide for Biopharmaceutical Facilities Architectural Design Considerations
E1589 Test Method for Evaluation of First Aid Antiseptic Drug Products
E1598 Practice for Conducting Early Seedling Growth Tests
E1604-94R02 Guide for Behavioral Testing in Aquatic Toxicology
E1611-00 Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids
E1619-95R03 Test Method for Chronic Oral Toxicity Study in Rats
E1624-94R02 Guide for Chemical Fate in Site-Specific Sediment/Water Microcosms
E1625-94R01 Test Method for Determining Biodegradability of Organic Chemicals in Semi-Continuous Activated Sludge (SCAS)
E1673-96R01 Test Method for Percent Suspensibility
E1674-99R03 Test Method for Cardiac Sensitization Study on Dogs
E1676-04 Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm and the Enchytraeid Potworm
E1688-00A Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates
E1689-95R03E01 Guide for Developing Conceptual Site Models for Contaminated Sites
E1690-01 Test Method for Determination of Ethanol Extractives in Biomass
E1705-95R02 Terminology Relating to Biotechnology
E1706-05 Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
E1711-95R03E01 Guide for Measurement of Behavior During Fish Toxicity Tests
E1720-01 Test Method for Determining Ready, Ultimate, Biodegradability of Organic Chemicals in a Sealed Vessel CO Production Test
E1721-01 Test Method for Determination of Acid-Insoluble Residue in Biomass
E1733-95R02 Guide for Use of Lighting in Laboratory Testing
E1755-01 Test Method for Ash in Biomass
E1756-01 Test Method for Determination of Total Solids in Biomass
E1757-01 Practice for Preparation of Biomass for Compositional Analysis
E1758-01 Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
E1759-95R03 Test Method for Isoaspartic Acid in Proteins: Method for the Determination of Asparagine Deamidation Products
E1766-95R02 Test Method for Determination of Effectiveness of Sterilization Processes for Reusable Medical Devices
E1768-95R03E01 Guide for Ventilatory Behavioral Toxicology Testing of Freshwater Fish
E1772-95R01 Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
E1798-96R01 Test Method for Assessing Treatability or Biodegradability, or Both, of Organic Chemicals in Porous Pots
E1811-96R01 Test Method for Oncogenicity Study in Rats and Mice
E1821-01 Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
E1837-96R02 Test Method to Determine Efficacy of Disinfection Processes for Reusable Medical Devices (Simulated Use Test)
E1838-02 Test Method for Determining the Virus-Eliminating Effectiveness of Liquid Hygienic Handwash and Handrub Agents Using the Fingerpads of Adult Volunteers
E1839-96R02 Test Method for Efficacy of Slimicides for the Paper Industry\MBacterial and Fungal Slime
E1841-04 Guide for Conducting Renewal Phytotoxicity Tests With Freshwater Emergent Macrophytes
E1847-96R03 Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines
E1848-96R03 Guide for Selecting and Using Ecological Endpoints for Contaminated Sites
E1849-96R02 Guide for Fish and Wildlife Incident Monitoring and Reporting
E1850-04 Guide for Selection of Resident Species as Test Organisms for Aquatic and Sediment Toxicity Tests
E1853M-04 Guide for Measuring the Presence of Planar Organic Compounds Which Induce CYP1A, Using Reporter Gene Test Systems
E1873-04 Guide for Detection of Nucleic Acid Sequences by the Polymerase Chain Reaction Technique
E1874-97 Test Method for Evaluation of Antibacterial Washes by Cup Scrub Technique
E1882-00 Test Method for Evaluation of Antibacterial Washes by the Agar Patch Technique
E1883-02 Test Method for Assessment of an Antibacterial Handwash Product by Multiple Basin Wash Technique
E1891-97R02 Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
E1910-04 Test Method for Agricultural pH Control Agents
E1913-04 Guide for Conducting Static, Axenic, 14-Day Phytotoxicity Tests in Test Tubes with the Submersed Aquatic Macrophyte, Komarov
E1923-97R03 Guide for Sampling Terrestrial and Wetlands Vegetation
E1924-97R04 Guide for Conducting Toxicity Tests with Bioluminescent Dinoflagellates
E1945-02 Test Method for Percent Dispersibility
E1963-02 Guide for Conducting Terrestrial Plant Toxicity Tests
E2011-99 Test Method for Evaluation of Handwashing Formulations for Virus-Eliminating Activity Using the Entire Hand
E2020-99AR04 Guide for Data and Information Options for Conducting an Ecological Risk Assessment at Contaminated Sites
E2043-99 Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
E2044-99 Test Method for Spreading of Liquid Agricultural Spray Mixtures
E2045-99R03 Practice for Detailed Clinical Observations of Test Animals
E2097-00 Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products
E2111-00 Quantitative Carrier Test Method To Evaluate the Bactericidal, Fungicidal, Mycobactericidal and Sporicidal Potencies of Liquid Chemical Germicides
E2122-02 Guide for Conducting In-situ Field Bioassays With Caged Bivalves
E2146-01 Guide for Detection of Nucleic Acid Sequences of the Human Immunodeficiency Virus HIV-1 by the Polymerase Chain Reaction Technique
E2149-01 Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions
E2170-01 Test Method for Determining Anaerobic Biodegradation Potential of Organic Chemicals Under Methanogenic Conditions
E2172-01 Guide for Conducting Laboratory Soil Toxicity Tests with the Nematode
E2180-01 Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials
E2186-02A Guide for Determining DNA Single-Strand Damage in Eukaryotic Cells Using the Comet Assay
E2196-02 Test Method for Quantification of a Pseudomonas aeruginosa Biofilm Grown with Shear and Continuous Flow Using a Rotating Disk Reactor
E2197-02 Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides
E2198-02 Specification for Athias-Henriot ()
E2199-02 Specification for Gahan ()
E2200-02 Specification for Information Included with Packaging of Multi-Cellular Biological Control Organisms
E2274-03 Test Method for Evaluation of Laundry Sanitizers and Disinfectants
E2275-03E01 Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance
E2276-03E01 Test Method for Determining the Bacteria-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adult Subjects
E2314-03 Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
E2315-03 Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure
E2316-03E01 Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
E2317-04 Guide for Conducting Renewal Microplate-Based Life-Cycle Toxicity Tests with a Marine Meiobenthic Copepod
E2360-04 Specification for Mulsant ()
E2361-04 Guide for Testing Leave-On Products Using In-Situ Methods
E2362-04 Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection
E2385-04 Guide for Estimating Wildlife Exposure Using Measures of Habitat Quality
E2406-04 Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations
E2407-04 Test Method for Effectiveness of Defoaming Agents
E2408-04 Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes
Section 12 - Nuclear, Solar, and Geothermal Energy
Volume 12.01, January 2005
Nuclear Energy (I)
C0696-99 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
C0697-04 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
C0698-04 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O)
C0750-03 Specification for Nuclear-Grade Boron Carbide Powder
C0752-03 Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy
C0753-04 Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder
C0757-90R02 Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable
C0758-04 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
C0759-04 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
C0760-90R02 Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
C0761-04 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
C0776-00 Specification for Sintered Uranium Dioxide Pellets
C0784-05 Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
C0787-03E02 Specification for Uranium Hexafluoride for Enrichment
C0788-03 Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals
C0791-04 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
C0799-99E01 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
C0809-94R00 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets
C0833-01 Specification for Sintered (Uranium-Plutonium) Dioxide Pellets
C0852-93R97 Guide for Design Criteria for Plutonium Gloveboxes
C0859 Terminology Relating to Nuclear Materials
C0888-03 Specification for Nuclear-Grade Gadolinium Oxide (Gd 2 O 3 ) Powder
C0889-99 Test Methods for Chemical and Mass Spectrographic Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
C0922-00 Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets
C0967-02A Specification for Uranium Ore Concentrate
C0968-99 Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
C0970-87R97 Guide for Sampling Special Nuclear Materials in Multi-Container Lots
C0982-03 Guide for Selecting Components for Energy-Dispersive X-Ray Fluorescence (XRF) Systems
C0992-89R97 Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
C0993-97R03 Guide for In-Plant Performance Evaluation of Automatic Pedestrian SNM Monitors
C0996-04E01 Specification for Uranium Hexafluoride Enriched to Less Than 5 \% U
C0998-90R00 Practice for Sampling Surface Soil for Radionuclides
C0999-90R00 Practice for Soil Sample Preparation for the Determination of Radionuclides
C1000-00 Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
C1001-00 Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
C1008-99 Specification for Sintered (Uranium-Plutonium) Dioxide Pellets\MFast Reactor Fuel
C1009 Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within the Nuclear Industry
C1022-05 Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate
C1030-03 Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
C1031-97R04 Specification for Nuclear-Grade Aluminum Oxide Powder
C1052-01 Practice for Bulk Sampling of Liquid Uranium Hexafluoride
C1062-00 Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
C1066-97R04 Specification for Nuclear Grade Zirconium Oxide Pellets
C1068-03 Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
C1075-93R04 Practices for Sampling Uranium-Ore Concentrate
C1076-97R04 Specification for Nuclear Grade Hafnium Oxide Pellets
C1108-99 Test Method for Plutonium by Controlled-Potential Coulometry
C1109-04 Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy
C1110-03 Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
C1111-04 Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
C1112-99 Guide for Application of Radiation Monitors to the Control and Physical Security of Special Nuclear Material
C1118-89R00 Guide for Selecting Components for Wavelength-Dispersive X-Ray Fluorescence (XRF) Systems
C1128-01 Guide for Preparation of Working Reference Materials for Use in the Analysis of Nuclear Fuel Cycle Materials
C1133-03 Test Method for Nondestructive Assay of Special Nuclear Material in Low-Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
C1144-89R04 Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms
C1156-03 Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
C1163-03 Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride
C1165-90R00E01 Test Method for Determining Plutonium by Controlled-Potential Coulometry in H 2SO4 at a Platinum Working Electrode
C1168-01 Practice for Preparation and Dissolution of Plutonium Materials for Analysis
C1169-97R03 Guide for Laboratory Evaluation of Automatic Pedestrian SNM Monitor Performance
C1174-04 Practice for Prediction of the Long-Term Behavior of Materials, Including Waste Forms, Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste
C1187-91R99 Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
C1188-04 Guide for Establishing a Quality Assurance Program for Uranium Conversion Facilities
C1189-02 Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors
C1204-02 Test Method for Uranium in the Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration
C1205-97R02 Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry
C1206-02 Test Method for Plutonium by Iron (II)/Chromium (VI) Amperometric Titration
C1207-03 Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
C1210 Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
C1215-92R97 Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
C1217-00 Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
C1219-92R97 Test Methods for Arsenic in Uranium Hexafluoride
C1220-98R04 Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste
C1221-92R04 Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
C1233-03 Practice for Determining Equivalent Boron Contents of Nuclear Materials
C1234-98R04 Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
C1235 Test Method for Plutonium by Titanium(III)/Cerium(IV) Titration
C1236-99 Guide for In-Plant Performance Evaluation of Automatic Vehicle SNM Monitors
C1237-99 Guide to In-Plant Performance Evaluation of Hand-Held SNM Monitors
C1238-97R03 Guide for Installation of Walk-Through Metal Detectors
C1254-99 Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence
C1255-93R99 Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
C1267-00 Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium
C1268-94R00 Test Method for Quantitative Determination of Americium 241 in Plutonium by Gamma-Ray Spectrometry
C1269-97R03 Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors
C1270-97R03 Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
C1284-00 Practice for Electrodeposition of the Actinides for Alpha Spectrometry
C1285-02 Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
C1287-03 Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry
C1295-98 Test Method for Gamma Energy Emission from Fission Products in Uranium Hexafluoride and Uranyl Nitrate Solution
C1296-95R01 Test Method for Determination of Sulfur in Uranium Oxides and Uranyl Nitrate Solutions by X-Ray Fluorescence (XRF)
C1297-03 Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
C1307-02 Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
C1308-95R01 Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms
C1309-97R03 Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors
C1310-01 Test Method for Determining Radionuclides in Soils by Inductively Coupled Plasma-Mass Spectrometry Using Flow Injection Preconcentration
C1316-01 Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using a Cf Shuffler
C1334-05 Specification for Uranium Oxides with a U Content of Less Than 5 \% for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide
C1343-96R02 Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
C1344-97R03 Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
C1345-96R01 Test Method for Analysis of Total and Isotopic Uranium and Total Thorium in Soils by Inductively Coupled Plasma-Mass Spectrometry
C1346-02 Practice for Dissolution of UF from P-10 Tubes
C1347-02 Practice for Preparation and Dissolution of Uranium Materials for Analysis
C1348-01 Specification for Blended Uranium Oxides with a235U Content of Less Than 5 \% for Direct Hydrogen Reduction to Nuclear Grade Uranium Dioxide
C1379-04 Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively Coupled Plasma-Mass Spectrometry
C1380-04 Test Method for the Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
C1387-03 Guide for the Determination of Technetium-99 in Soil
C1402-04 Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
C1408-98R04 Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
C1411-01 Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis
C1413-99 Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
C1414-01 Practice for The Separation of Americium from Plutonium by Ion Exchange
C1415-01A Test Method for Pu Isotopic Abundance By Alpha Spectrometry
C1416-04 Test Method for Uranium Analysis Waste Water by X-ray Fluorescence
C1428-99 Test Method for Isotopic Analysis of Uranium Hexafluoride by Single\NStandard Gas Source Multiple Collector Mass Spectrometer Method
C1429-99R04 Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
C1430-00 Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
C1431-99 Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal
C1432-03 Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
C1441-04 Test Method for The Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
C1453-00 Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
C1454-00 Guide for Pyrophoricity/Combustibility Testing in Support of Pyrophoricity Analyses of Metallic Uranium Spent Nuclear Fuel
C1455-00 Guide for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
C1456-00 Test Method for the Determination of Uranium or Gadolinium, or Both, in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF)
C1457-00 Test Method for Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
C1458-00 Test Method for Nondestructive Assay of Plutonium, Tritium and 241Am by Calorimetric Assay
C1462-00 Specification for Uranium Metal Enriched to More than 15 \% and Less Than 20\t\% 235U
C1463-00 Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis
C1473-00 Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
C1474-00 Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
C1475-00 Guide for Determination of Neptunium-237 in Soil
C1476-00 Test Method for Analysis of Urine for Technetium-99 by Inductively Coupled Plasma-Mass Spectrometry
C1477-00 Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
C1490-04 Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel
C1493-01 Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System
C1500-02 Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting
C1502-01 Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide
C1507-01 Test Method for Radiochemical Determination of Strontium-90 in Soil
C1508-01 Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
C1514-02 Test Method for Measurement of U Fraction using the Enrichment Meter Principle
C1517-02 Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
C1533-02 Guide for General Design Considerations for Hot Cell Equipment
C1539-02 Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation Counting
C1554-03 Guide for Materials Handling Equipment for Hot Cells
C1561-03 Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride by Alpha Spectrometry
C1562-03E01 Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems
C1571-03 Guide for Characterization of Radioactive and/or Hazardous Wastes for Thermal Treatment
C1572-04 Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities
C1590-04 Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
C1592-04 Guide for Nondestructive Assay Measurements
C1615-05 Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities
E0267-90R01 Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances
E0321-96R05 Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)
Volume 12.02, September 2005
Nuclear Energy (II), Solar, and Geothermal Energy
E0170-05 Terminology Relating to Radiation Measurements and Dosimetry
E0181-98R03 Test Methods for Detector Calibration and Analysis of Radionuclides
E0185-02 Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
E0261-03 Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
E0262-03 Test Method for Determining Thermal Neutron Reaction and Fluence Rates by Radioactivation Techniques
E0263-05 Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron
E0264-02 Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel
E0265-98R02 Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32
E0266-02 Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum
E0385-90R02 Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
E0393-96R02 Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters
E0424-71R01 Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
E0453-79R01 Practice for Examination of Fuel Element Cladding Including the Determination of the Mechanical Properties
E0481-03 Test Method for Measuring Neutron Fluence Rates by Radioactivation of Cobalt and Silver
E0482-01 Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance, E706 (IID)
E0496-02 Test Method for Measuring Neutron Fluence and Average Energy from 3H(d,n) 4He Neutron Generators by Radioactivation Techniques
E0509-03 Guide for In-Service Annealing of Light-Water Moderated Nuclear Reactor Vessels
E0521-96R03 Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation
E0523-02 Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper
E0526-97R02 Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
E0531-76R01 Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
E0560-01 Practice for Extrapolating Reactor Vessel Surveillance Dosimetry Results, E 706(IC)
E0636-02 Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels, E\t706 (IH)
E0666-03 Practice for Calculating Absorbed Dose From Gamma or X Radiation
E0668-05 Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
E0683-91R01 Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings
E0692-00 Test Method for Determining the Content of Cesium-137 in Irradiated Nuclear Fuels by High-Resolution Gamma-Ray Spectral Analysis
E0693-01 Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E 706(ID)
E0704-96R02 Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238
E0705-96R02 Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237
E0706-02 Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards, E 706(0)
E0712-80R03 Practice for Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating and Cooling Systems
E0720-04 Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
E0721-01 Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
E0722-04E01 Practice for Characterizing Neutron Energy Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-Hardness Testing of Electronics
E0744-85R96 Practice for Evaluating Solar Absorptive Materials for Thermal Applications
E0745-80R03 Practices for Simulated Service Testing for Corrosion of Metallic Containment Materials for Use With Heat-Transfer Fluids in Solar Heating and Cooling Systems
E0772-05 Terminology Relating to Solar Energy Conversion
E0781-86R03 Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates
E0782-95R01 Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode
E0798-96R03 Practice for Conducting Irradiations at Accelerator-Based Neutron Sources
E0821-96R03 Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
E0822-92R03 Practice for Determining Resistance of Solar Collector Covers to Hail by Impact With Propelled Ice Balls
E0823-81R01 Practice for Nonoperational Exposure and Inspection of a Solar Collector
E0844-03 Guide for Sensor Set Design and Irradiation for Reactor Surveillance, E 706(IIC)
E0853-01 Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Results, E706(IA)
E0854-03 Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
E0861-94R01 Practice for Evaluating Thermal Insulation Materials for Use in Solar Collectors
E0881-92R03 Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode
E0900-02 Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials, E706 (IIF)
E0903-96 Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
E0904-87R01 Practice for Generating All-Day Thermal Performance Data for Solar Collectors
E0905-87R01 Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors
E0910-01 Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance, E706 (IIIC)
E0927-05 Specification for Solar Simulation for Photovoltaic Testing
E0942-96R03 Guide for Simulation of Helium Effects in Irradiated Metals
E0944-02 Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance, E 706 (IIA)
E0947-83R02 Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
E0948-05 Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
E0957-03 Terminology Relating to Geothermal Energy
E0971-88R03 Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
E0972-96R02 Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
E0973-05 Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
E0974-00 Guide for Specifying Thermal Performance of Geothermal Power Systems
E1005-03 Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
E1006-02 Practice for Analysis and Interpretation of Physics Dosimetry Results for Test Reactors, E 706(II)
E1008-03 Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications
E1018-01 Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E 706 (IIB)
E1021-95R01 Test Methods for Measuring Spectral Response of Photovoltaic Cells
E1026-04 Practice for Using the Fricke Reference-Standard Dosimetry System
E1034-95R01 Specification for Nuclear Facility Transient Worker Records
E1035-02 Practice for Determining NeutronExposures for Nuclear Reactor Vessel Support Structures
E1036-02 Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
E1038-05 Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls
E1039 Test Method for Calibration of Silicon Non-Concentrator Photovoltaic Primary Reference Cells Under Global Irradiation
E1040-05 Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells
E1056-85R01 Practice for Installation and\t Service\t of\t Solar\t Domestic\t Water\t Heating\t Systems\t for\t One-\t and\t Two-Family\t Dwellings
E1068-85R03 Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid
E1069-85R03 Test Method for Testing Polymeric Seal Materials for Geothermal and/or High Temperature Service Under Sealing Stress
E1084-86R03 Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight
E1089-86R01 Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference
E1125-05 Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
E1143-05 Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
E1160-87R01 Guide for On-Site Inspection and Verification of Operation of Solar Domestic Hot Water Systems
E1167-87R02 Guide for Radiation Protection Program for Decommissioning Operations
E1168-95R01 Guide for Radiological Protection Training for Nuclear Facility Workers
E1171-04 Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
E1175-87R03 Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere
E1214-87R00 Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706(IIIE)
E1249-00R05 Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources
E1250-88R05 Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices
E1253-99 Guide for Reconstitution of Irradiated Charpy Specimens
E1278 Guide for Radioactive Pathway Methodology for Release of Sites Following Decommissioning
E1281-89R96E01 Guide for Nuclear Facility Decommissioning Plans
E1297-02 Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
E1328-05 Terminology Relating to Photovoltaic Solar Energy Conversion
E1362-05 Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
E1462-00 Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules
E1524 Test Method for Saltwater Immersion and Corrosion Testing of Photovoltaic Modules for Marine Environments
E1596-99 Test Methods for Solar Radiation Weathering of Photovoltaic Modules
E1597-05 Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
E1675-04E01 Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
E1760-96R03 Guide for Unrestricted Disposition of Bulk Materials Containing Residual Amounts of Radioactivity
E1799-02 Practice for Visual Inspections of Photovoltaic Modules
E1802-01 Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules
E1819-96 Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities
E1830-04 Test Methods for Determining Mechanical Integrity of Photovoltaic Modules
E1854-05 Practice for Ensuring Test Consistency in Neutron-Induced Displacement Damage of Electronic Parts
E1855-04E01 Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
E1892-97R03 Guide for Preparing Characterization Plans for Decommissioning Nuclear Facilities
E1893-97R03 Guide for Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological Assessments in Support of Decommissioning
E1894-97R02 Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
E2005-05E01 Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
E2006-05 Guide for Benchmark Testing of Light Water Reactor Calculations
E2047-05 Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays
E2059-05 Practice for Application and Analysis of Nuclear Research Emulsions for Fast Neutron Dosimetry
E2215-02 Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels
E2216-02 Guide for Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning
E2232-02 Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications
E2236-05 Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
E2303-03 Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
E2304-03 Practice for Use of a LiF Photo-Fluorescent Film Dosimetry System
E2381-04 Guide for Dosimetry In Radiation Processing of Fluidized Beds and Fluid Streams
E2420-05 Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities
E2421-05 Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities
E2450-05 Practice for Application of CaF(Mn) Thermoluminescence Dosimeters in Mixed Neutron-Photon Environments
F1355-99 Guide for Irradiation of Fresh Fruits as a Phytosanitary Treatment
F1356-99 Guide for Irradiation of Fresh and Frozen Red Meat and Poultry to Control Pathogens and Other Microorganisms
F1640-03 Guide for Selection and Use of Packaging Materials for Foods to Be Irradiated
F1736-03 Guide for Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms
F1885-04 Guide for Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogens and Other Microorganisms
51204\N2006(E) Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing
51205\N2002(E) Practice for Use of a Ceric-Cerous Sulfate Dosimetry System
51261\N2002(E) Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing
51275\N2006(E) Practice for Use of a Radiochromic Film Dosimetry System
51276\N2002(E) Practice for Use of a Polymethylmethacrylate Dosimetry System
51310\N2006(E) Practice for Use of a Radiochromic Optical Waveguide Dosimetry System
51400\N2003(E) Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory
51401\N2003(E) Practice for Use of a Dichromate Dosimetry System
51431\N2005(E) Practice for Dosimetry in Electron Beam and X-ray (Bremsstrahlung) Irradiation Facilities for Food Processing
51538\N2002(E) Practice for Use of the Ethanol-Chlorobenzene Dosimetry System
51539\N2005(E) Guide for Use of Radiation-Sensitive Indicators
51540\N2006(E) Practice for Use of a Radiochromic Liquid Dosimetry System
51607\N2006(E) Practice for Use of an Alanine-EPR Dosimetry System
51608\N2005(E) Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing
51631\N2003(E) Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations
51649\N2005(E) Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV
51650\N2005(E) Practice for Use of a Cellulose Triacetate Dosimetry System
51702\N2006(E) Practice for Dosimetry in Gamma Irradiation Facilities for Radiation Processing
51707\N2005(E) Guide for Estimating Uncertainties in Dosimetry for Radiation Processing
51818\N2002(E) Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 keV
51900\N2002(E) Guide for Dosimetry in Radiation Research on Food and Agricultural Products
51939\N2005(E) Practice for Blood Irradiation Dosimetry
51940\N2006(E) Guide for Dosimetry for Sterile Insect Release Programs
51956\N2005(E) Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
52116\N2002(E) Practice for Dosimetry for a Self-Contained Dry-Storage Gamma-Ray Irradiator
Section 13 - Medical Devices and Services
Volume 13.01, January 2005
Medical and Surgical Materials and Devices; Anesthetic and Respiratory Equipment; Pharmaceutical Application of Process Analytical Technology
E1202-87R03 Guide for Development of Micronucleus Assay Standards
E1262-88R03 Guide for Performance of Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay
E1263-97R03 Guide for Conduct of Micronucleus Assays in Mammalian Bone Marrow Erythrocytes
E1280-97R03 Guide for Performing the Mouse Lymphoma Assay for Mammalian Cell Mutagenicity
E1397-91R03 Practice for Rat Hepatocyte DNA Repair Assay
E1398-91R03 Practice for Rat Hepatocyte DNA Repair Assay
E2363-05 Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry
F0067-00 Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700),
F0075-01 Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
F0086-04 Practice for Surface Preparation and Marking of Metallic Surgical Implants
F0090-01 Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
F0116-00R04 Specification for Medical Screwdriver Bits
F0136-02A Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
F0138-03 Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
F0139-03 Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
F0366-04 Specification for Fixation Pins and Wires
F0370 Specification for Proximal Femoral Endoprosthesis
F0382-99R03E01 Specification and Test Method for Metallic Bone Plates
F0384-00 Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
F0451-99AE01 Specification for Acrylic Bone Cement
F0452-76R02 Specification for Preformed Cranioplasty Plates
F0543-02 Specification and Test Methods for Metallic Medical Bone Screws
F0560-05 Specification for Unalloyed Tantalum for Surgical Implant Applications(UNS R05200, UNS R05400)
F0561-05 Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
F0562-02 Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
F0563 Specification for Wrought Cobalt-20Nickel-20Chromium-3.5Molybdenum-3.5Tungsten-5Iron Alloy for Surgical Implant Applications (UNS R30563)
F0564-02 Specification and Test Methods for Metallic Bone Staples
F0565-04 Practice for Care and Handling of Orthopedic Implants and Instruments
F0601-03 Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
F0602-98AR03 Criteria for Implantable Thermoset Epoxy Plastics
F0603-00 Specification for High-Purity Dense Aluminum Oxide for Medical Application
F0619-03 Practice for Extraction of Medical Plastics
F0620-00 Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants
F0621-02 Specification for Stainless Steel Forgings for Surgical Implants
F0622-79R02 Specification for Preformed Cranioplasty Plates That Can Be Altered
F0623-99E01 Performance Specification for Foley Catheter
F0624-98AR03 Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
F0629-02 Practice for Radiography of Cast Metallic Surgical Implants
F0639-98AR03 Specification for Polyethylene Plastics for Medical Applications
F0640-79R00 Test Methods for Radiopacity of Plastics for Medical Use
F0641-98AR03 Specification for Implantable Epoxy Electronic Encapsulants
F0647-94R00 Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application
F0648-04 Specification for Ultra-High-Molecular Weight Polyethylene Powder and Fabricated Form for Surgical Implants
F0665-98R03 Classification for Vinyl Chloride Plastics Used in Biomedical Application
F0688-00 Specification for Wrought Cobalt-35 Nickel-20 Chromium-10 Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
F0700-93R02 Practice for Care and Handling of Intracranial Aneurysm Clips and Instruments
F0701-81R02 Practice for Care and Handling of Neurosurgical Implants and Instruments
F0702-98AR03 Specification for Polysulfone Resin for Medical Applications
F0703-96R02 Specification for Implantable Breast Prostheses
F0719-81R02E01 Practice for Testing Biomaterials in Rabbits for Primary Skin Irritation
F0720-81R02E01 Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test
F0732-00 Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
F0745-00 Specification for 18Chromium-12.5Nickel-2.5Molybdenum Stainless Steel for Cast and Solution-Annealed Surgical Implant Applications
F0746-04 Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
F0748-04 Practice for Selecting Generic Biological Test Methods for Materials and Devices
F0749-98R02E02 Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit
F0750-87R02E01 Practice for Evaluating Material Extracts by Systemic Injection in the Mouse
F0754-00 Specification for Implantable Polytetrafluoroethylene (PTFE) Polymer Fabricated in Sheet, Tube, and Rod Shapes
F0755-99R05 Specification for Selection of Porous Polyethylene for Use in Surgical Implants
F0756-00 Practice for Assessment of Hemolytic Properties of Materials
F0763-04 Practice for Short-Term Screening of Implant Materials
F0799-02 Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
F0813-01 Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices
F0881-94R00 Specification for Silicone Elastomer Facial Implants
F0882-84R02 Performance and Safety Specification for Cryosurgical Medical Instruments
F0895-84R01E01 Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity
F0897-02 Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
F0899-02 Specification for Stainless Steels for Surgical Instruments
F0920-93R99 Specification for Minimum Performance and Safety Requirements for Resuscitators Intended for Use With Humans
F0921-85R02 Terminology Relating to Hemostatic Forceps
F0960 Specification for Medical and Surgical Suction and Drainage Systems
F0961-03 Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
F0965-99 Specification for Rigid Laryngoscopes for Tracheal Intubation\MHook-On Fittings for Laryngoscope Handles and Blades with Lamps
F0981-04 Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone
F0982-86R02 Specification for Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion
F0983-86R05 Practice for Permanent Marking of Orthopaedic Implant Components
F0997-98AR03 Specification for Polycarbonate Resin for Medical Applications
F1026-86R02 Specification for General Workmanship and Performance Measurements of Hemostatic Forceps
F1027-86R02 Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices
F1044-05 Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
F1054 Specification for Conical Fittings
F1058-02 Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008)
F1078-87R02 Terminology for Surgical Scissors\MInserted and Non-Inserted Blades
F1079-87R02 Specification for Inserted and Noninserted Surgical Scissors
F1088-04A Specification for Beta-Tricalcium Phosphate for Surgical Implantation
F1089-02 Test Method for Corrosion of Surgical Instruments
F1091-02 Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire [UNS R30605]
F1100 Specification for Ventilators Intended for Use in Critical Care
F1101-90R03E01 Specification for Ventilators Intended for Use During Anesthesia
F1108-04 Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
F1147-05 Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
F1160-05 Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
F1185-03 Specification for Composition of Hydroxylapatite for Surgical Implants
F1195-99 Specification for Rigid Laryngoscopes for Tracheal Intubation\MHook on Fittings for Fiberilluminated Blades and Handles
F1204 Specification for Anesthesia Reservoir Bags
F1205-88R99 Specification for Anesthesia Breathing Tubes
F1208-89R05 Specification for Minimum Performance and Safety Requirements for Anesthesia Breathing Systems
F1218-89R99 Specification for Bronchoscopes (Rigid)
F1223-05 Test Method for Determination of Total Knee Replacement Constraint
F1242 Specification for Cuffed and Uncuffed Tracheal Tubes
F1243 Specification for Tracheal Tube Connectors
F1246-91R99 Specification for Electrically Powered Home Care Ventilators, Part 1\MPositive-Pressure Ventilators and Ventilator Circuits
F1251-89R03 Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices
F1264-03 Specification and Test Methods for Intramedullary Fixation Devices
F1266-89R02 Performance Specification for Cerebral Stereotactic Instruments
F1295-05 Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
F1314-01 Specification for Wrought Nitrogen Strengthened 22 Chromium \N 13 Nickel \N 5 Manganese \N 2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
F1325-91R02 Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods
F1341-99 Specification for Unalloyed Titanium Wire UNS R50250, UNS R50400, UNS R50550, UNS R50700, for Surgical Implant Applications
F1343-02 Specification for Anesthetic Gas Scavenging Systems\MTransfer and Receiving Systems
F1350-02 Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)
F1357-99R04 Specification for Articulating Total Wrist Implants
F1377-04 Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
F1378-04 Specification for Shoulder Prostheses
F1408-97R02E01 Practice for Subcutaneous Screening Test for Implant Materials
F1415 Specification for Pulse Oximeters
F1439-03 Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials
F1440-92R02 Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components Without Torsion
F1441-03 Specification for Soft-Tissue Expander Devices
F1452-01 Specification for Minimum Performance and Safety Requirements for Anesthetic Gas Monitors
F1456-01 Specification for Minimum Performance and Safety Requirements for Capnometers
F1462 Specification for Oxygen Analyzers
F1463-93R99 Specification for Alarm Signals in Medical Equipment Used in Anesthesia and Respiratory Care
F1464-93R99 Specification for Oxygen Concentrators for Domiciliary Use
F1472-02A Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
F1497-99A Test Method for Determining Laser Resistance of the Shaft of Tracheal Tubes
F1518-00 Practice for Cleaning and Disinfection of Flexible Fiberoptic and Video Endoscopes Used in the Examination of the Hollow Viscera
F1536-95R05 Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape
F1537-00 Specification for Wrought Cobalt-28 Chromium-6 Molybdenum Alloy for Surgical Implants
F1538-03 Specification for Glass and Glass Ceramic Biomaterials for Implantation
F1541-02 Specification and Test Methods for External Skeletal Fixation Devices
F1542-94R00 Specification for the Requirements and Disclosure of Self-Closing Aneurysm Clips
F1573-95R00 Specification for Anesthetic Equipment\MOropharyngeal and Nasopharyngeal Airways
F1579-02E01 Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications
F1580-01 Specification for Titanium and Titanium-6 Aluminum-4\tVanadium Alloy Powders for Coatings of Surgical Implants
F1581-99 Specification for Composition of Anorganic Bone for Surgical Implants
F1582-98R03 Terminology Relating to Spinal Implants
F1586-02 Specification for Wrought Nitrogen Strengthened 21 Chromium\M10 Nickel\M3 Manganese\M2.5 Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
F1590 Specification for Tracheostomy Tube Connectors
F1609-03 Specification for Calcium Phosphate Coatings for Implantable Materials
F1611-00R04 Specification for Intramedullary Reamers
F1612-95R00 Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components with Torsion
F1613-95R02 Specification for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb Type)
F1627 Specification for Tracheostomy Tubes\NPediatric Tracheostomy Tubes
F1628-95R00 Specification for Labeling and Marking of Cuffed and Uncuffed Tracheal Tubes and Related Treatments Intended for Use During Laser Surgery
F1634-95R00 Practice for In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices
F1635-04A Test Method for Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
F1638-95R02 Terminology for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb-Type)
F1659-95 Test Method for Bending and Shear Fatigue Testing of Calcium Phosphate Coatings on Solid Metallic Substrates
F1666 Specification for Adult Tracheostomy Tubes
F1672-95R00 Specification for Resurfacing Patellar Prosthesis
F1690-96R04 Specification for Humidifiers for Medical Use\MPart 1: General Requirements for Active Humidification Systems
F1713-03 Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)
F1714-96R02 Guide for Gravimetric Wear Assessment of Prosthetic Hip-Designs in Simulator Devices
F1715-00E01 Guide for Wear Assessment of Prosthetic Knee Designs in Simulator Devices
F1717-04 Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
F1719-96R02 Specification for Image-Interactive Stereotactic and Localization Systems
F1744-96R02E01 Guide for Care and Handling of Stainless Steel Surgical Instruments
F1781-03 Specification for Elastomeric Flexible Hinge Finger Total Joint Implants
F1798-97R03 Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants
F1800-04 Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
F1801-97R04 Practice for Corrosion Fatigue Testing of Metallic Implant Materials
F1813-01 Specification for Wrought Titanium \N 12 Molybdenum \N 6 Zirconium \N 2 Iron Alloy for Surgical Implant (UNS R58120)
F1814-97AR03 Guide for Evaluating Modular Hip and Knee Joint Components
F1820-97R03 Test Method for Determining the Axial Disassembly Force of a Modular Acetabular Device
F1828-97 Specification for Ureteral Stents
F1829-98R03 Test Method for Static Evaluation of Glenoid Locking Mechanism in Shear
F1830-97R05 Practice for Selection of Blood for Evaluation of Blood Pumps
F1831-97 Specification for Cranial Traction Tongs and Halo External Spinal Immobilization Devices
F1839-01 Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
F1840-98AR04 Terminology for Surgical Suture Needles
F1841-97R05 Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps
F1850-00R05 Specification for Particular Requirements for Anesthesia Workstations and Their Components
F1854-01 Test Method for Stereological Evaluation of Porous Coatings on Medical Implants
F1855-00R05 Specification for Polyoxymethylene (Acetal) for Medical Applications
F1873-98 Specification for High-Purity Dense Yttria Tetragonal Zirconium Oxide Polycrystal (Y-TZP) for Surgical Implant Applications
F1874-98R04 Test Method for Bend Testing of Needles Used in Surgical Sutures
F1875-98R04 Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface
F1876-98R03E01 Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications
F1877-98R03E01 Practice for Characterization of Particles
F1903-98R03 Practice for Testing For Biological Responses to Particles
F1904-98R03 Practice for Testing the Biological Responses to Particles
F1905-98R03 Practice For Selecting Tests for Determining the Propensity of Materials to Cause Immunotoxicity
F1906-98R03 Practice for Evaluation of Immune Responses In Biocompatibility Testing Using ELISA Tests, Lymphocyte Proliferation, and Cell Migration
F1925-99R05 Specification for Virgin Poly(L-Lactic Acid) Resin for Surgical Implants
F1926-03 Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Coatings
F1978-00E01 Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber|Pt Abraser
F1981-99 Specification for Suction Catheters for Use in the Respiratory Tract
F1983-99R03 Practice for Assessment of Compatibility of Absorbable/Resorbable Biomaterials for Implant Applications
F1984-99R03 Practice for Testing for Whole Complement Activation in Serum by Solid Materials
F1992-99 Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes
F2002 Terminology Relating to Anesthesia and Respiratory Equipment
F2003-02 Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
F2006-03 Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
F2005-00 Terminology for Nickel-Titanium Shape Memory Alloys
F2009-00 Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses
F2024-00 Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings
F2025-00 Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment
F2026-02 Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
F2027-00E01 Guide for Characterization and Testing of Substrate Materials for Tissue-Engineered Medical Products
F2028-02 Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation
F2033-05 Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials
F2038-00R05 Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I\MFormulations and Uncured Materials
F2042-00R05 Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II\MCrosslinking and Fabrication
F2051-00 Specification for Implantable Saline Filled Breast Prosthesis
F2052-02 Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
F2062-00 Specification for Square Drive Interconnections on Surgical Instruments
F2063-00 Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
F2064-00 Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue\NEngineered Medical Products Application
F2065-00E01 Practice for Testing for Alternative Pathway Complement Activation in Serum by Solid Materials
F2066-01 Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)
F2068-03 Specification for Femoral Prostheses\MMetallic Implants
F2077-03 Test Methods For Intervertebral Body Fusion Devices
F2079-02 Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents
F2081-01 Guide for Characterization and Presentation of the Dimensional Attributes of Vascular Stents
F2082-03 Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
F2083-04 Specification for Total Knee Prosthesis
F2091-01 Specification for Acetabular Prostheses
F2102-01E01 Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
F2103-01 Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications
F2118-03 Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials
F2119-01 Test Method for Evaluation of MR Image Artifacts from Passive Implants
F2129-04 Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
F2131-02 Test Method for Biological Activity of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) Using the W-20 Mouse Stromal Cell Line
F2132-01 Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps
F2146-01 Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)
F2147-01 Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens
F2148-01 Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA)
F2149-01 Test Method for Automated Analyses of Cells\Mthe Electrical Sensing Zone Method of Enumerating and Sizing Single Cell Suspensions
F2150-02E01 Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products
F2151-01 Practice for Assessment of White Blood Cell Morphology After Contact with Materials
F2180-02 Specification for Metallic Implantable Strands and Cables
F2181-02A Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
F2182-02A Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging
F2183-02 Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants
F2193-02 Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
F2210-02 Guide for Processing Cells, Tissues, and Organs for Use in Tissue Engineered Medical Products
F2211-04 Classification for Tissue Engineered Medical Products (TEMPs)
F2212-02 Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)
F2213-04 Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
F2214-02 Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
F2224-03 Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants
F2229-02 Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
F2255-05 Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
F2256-05 Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading
F2257-03 Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
F2258-05 Test Method for Strength Properties of Tissue Adhesives in Tension
F2259-03 Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy
F2260-03 Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy
F2267-04 Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
F2311-03 Guide for Classification of Therapeutic Skin Substitutes
F2312-04 Terminology Relating to Tissue Engineered Medical Products
F2313-03 Specification for Virgin Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide
F2315-03 Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels
F2345-03 Test Methods for Determination of Static and Cyclic Fatigue Strength of Ceramic Modular Femoral Heads
F2346-05 Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
F2347-03 Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications
F2381-04 Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
F2382-04E01 Test Method for Assessment of Intravascular Medical Device Materials on Partial Thromboplastin Time (PTT)
F2383-05 Guide for Assessment of Adventitious Agents in Tissue Engineered Medical Products (TEMPs)
F2384-05 Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
F2385-04 Test Method for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs
F2386-04 Guide for Preservation of Tissue Engineered Medical Products (TEMPs)
F2392-04 Test Method for Burst Strength of Surgical Sealants
F2393-04 Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications
F2394-04 Guide for Measuring Securement of Balloon Expandable Stent Mounted on Delivery System
F2450-04 Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue Engineered Medical Products
F2451-05 Guide for Assessment of Implantable Devices Intended to Repair or Regenerate Articular Cartilage
F2458-05 Test Method for Wound Closure Strength of Tissue Adhesives and Sealants
Volume 13.02, September 2005
Emergency Medical Services; Search and Rescue
F1031-00 Practice for Training the Emergency Medical Technician (Basic)
F1086-94R02 Guide for Structures and Responsibilities of Emergency Medical Services Systems Organizations
F1118-91R03 Specification for National Air Medical Transport Units Resources Catalog
F1149-93R03 Practice for Qualifications, Responsibilities, and Authority of Individuals and Institutions Providing Medical Direction of Emergency Medical Services
F1177-02 Terminology Relating to Emergency Medical Services
F1219-00 Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Initial and Detailed Assessment
F1220-95R01 Guide for Emergency Medical Services System (EMSS) Telecommunications
F1221-89R01 Guide for Interagency Information Exchange
F1224-89R04E01 Guide for Providing System Evaluation for Emergency Medical Services
F1229-01 Guide for the Qualification and Training of EMS Air Medical Patient Care Providers
F1254-90R01 Practice for Performance of Prehospital Manual Defibrillation
F1255-90R02 Practice for Performance of Prehospital Automated Defibrillation
F1256-90R02 Guide for Selection and Practice of Emergency Medical Services Instructor for Basic Life Support/Emergency Medical Technician (BLS/EMT) Training Programs
F1257-90R02 Guide for Selection and Practice of Emergency Medical Services Instructor for Advanced Life Support/Emergency Medical Technician (ALS/EMT) Training Programs
F1258-95R01 Practice for Emergency Medical Dispatch
F1268-90R03 Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems
F1285-90R03 Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Examination Techniques
F1286-90R02 Guide for Development and Operation of Level 1 Pediatric Trauma Facilities
F1287-90R02 Guide for Scope of Performance of First Responders Who Provide Emergency Medical Care
F1288-90R03 Guide for Planning for and Response to a Multiple Casualty Incident
F1328-00 Guide for Training Emergency Medical Technician (Basic) to Prepare Patients for Medical Transportation
F1329-00 Guide for Training the Emergency Medical Technician (Basic) in Basic Anatomy and Physiology
F1339-92R03 Guide for Organization and Operation of Emergency Medical Services Systems
F1381-92R03 Guide for Planning and Developing 9-1-1 Enhanced Telephone Systems
F1382 Specification for Search and Rescue Computer Software Information Exchange
F1418-01 Guide for Training the Emergency Medical Technician (Basic) in Roles and Responsibilities
F1419-00 Guide for Training the Emergency Medical Technician (Basic) To Manage Shock
F1420-01 Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Management Techniques
F1421-01 Guide for Training the Emergency Medical Technician (Basic) To Manage Obstetrical Emergencies
F1422-92R99 Guide for Using the Incident Command System Framework in Managing Civilian Search and Rescue Operations
F1453-92R03 Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care
F1489 Guide for Performance of Patient Assessment by the Emergency Medical Technician (Paramedic)
F1490-04A Terminology Relating to Search and Rescue
F1491-93R02 Specification for An Avalanche Beacon Frequency
F1493-93R03 Guide for Financing and Financial Accountability of Medical Transportation Systems
F1517-94R02 Guide for Scope of Performance of Emergency Medical Services Ambulance Operations
F1549-94R05 Terminology Relating to Underwater Search, Rescue, and Recovery Activities
F1552-94R02 Practice for Training Instructor Qualification and Certification Eligibility of Emergency Medical Dispatchers
F1555-94R02 Guide for Characteristics for Extremity Splints
F1556-94R02 Guide for Spinal Immobilization and Extrication (SPINE) Device Characteristics
F1557-94R02 Guide for Full Body Spinal Immobilization Devices (FBSID) Characteristics
F1558-94R02 Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID)
F1559-94R02 Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC)
F1560-00 Practice for Emergency Medical Dispatch Management
F1583-95R00 Practice for Communications Procedures\MPhonetics
F1584-95R03 Practice for Marking Buildings During Disaster Search Operations
F1591-95R00 Practice for Visual Signals Between Persons on the Ground and in Aircraft During Ground Emergencies
F1616-95R02 Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings
F1629-95R02 Guide for Establishing Operating Emergency Medical Services and Management Information Systems, or Both
F1633-97R03 Guide for Techniques in Land Search
F1651-95R02 Guide for Training the Emergency Medical Technician (Paramedic)
F1652-95R02 Guide for Providing Essential Data Needed in Advance for Prehospital Emergency Medical Services
F1653-95R02 Guide for Scope of Performance of Triage in a Prehospital Environment
F1654-95R02 Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in a Prehospital Environment
F1655-95R02 Guide for Training First Responders Who Practice in Wilderness, Delayed, or Prolonged Transport Settings
F1705-96R02 Guide for Training Emergency Medical Services Ambulance Operations
F1728-96R01 Practice for Multiple Persons Cold Water Survival/Rescue Technique: Huddle Position
F1729-96R01 Practice for Single Person Cold Water Survival/Rescue Technique: HELP Position
F1730-96R02 Guide for Throwing a Water Rescue Throwbag
F1739-96R02 Guide for Performance of a Water Rescuer\MLevel I
F1740-96R02 Guide for Inspection of Nylon, Polyester, or Nylon/Polyester Blend, or Both Kernmantle Rope
F1764-97R02 Guide for Selection of Hardline Communication Systems for Confined-Space Rescue
F1765-97AR02 Guide for Ice Staff Self-Rescue Technique
F1766-97AR02 Guide for Ice Awls Self-Rescue Technique
F1767-98R05 Guide for Forms Used for Search and Rescue
F1768-97R02 Guide for Using Whistle Signals During Rope Rescue Operations
F1783-97R02 Guide for Performance of an Ice Rescuer\MLevel II
F1823-97R02 Guide for Water Rescue Personal Flotation Device (PFD)
F1824-97R02 Guide for Performance of a Water Rescuer\NLevel II
F1846-98R03 Practice for Symbols and Markings for Use With Land Search Maps
F1847-98R05 Guide for Demonstrating Minimum Skills of Search and Rescue Dogs and Handlers
F1848-98 Classification for Search and Rescue Dog Crew/Teams
F1879-98R05 Guide for Demonstrating Obedience and Agility in Search and Rescue Dogs
F1949-99 Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles
F1956-99R05 Specification for Rescue Carabiners
F1993-99R05 Classification System of Human Search and Rescue Resources
F2020-02A Practice for Design, Construction, and Procurement of Emergency Medical Services Systems (EMSS) Ambulances
F2047-00 Practice for Workers' Compensation Coverage of Emergency Services Volunteers
F2076-01 Practice for Communicating an EMS Patient Report to Receiving Medical Facilities
F2099-01 Guide for Use of Universal Transverse Mercator (UTM) Grids When Preparing and Using a Field Map for Land Search
F2116-01 Specification for Low Stretch and Static Kernmantle Life Safety Rope
F2171-02 Guide for Defining the Performance of First Aid Providers in Occupational Settings
F2209-03 Guide for Training of Level I Land Search Team Member
F2266-03 Specification for Masses Used in Testing Rescue Systems and Components
F2318-04 Specification for Rotary Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances
F2319-04 Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances
F2428-04 Guide for Selection and Use for Pelvic Ring Circumferential Compression Stabilization Devices (PRCCSD)
F2491-05 Guide for Determining Load Ratios for Technical Rescue Systems and Equipment
Section 14 - General Methods and Instrumentation
Volume 14.01, January 2005
Healthcare Informatics
E1239-04 Practice for Description of Reservation/Registration-Admission, Discharge, Transfer (R-ADT) Systems for Electronic Health Record (EHR) Systems
E1284-97 Guide for Construction of a Clinical Nomenclature for Support of Electronic Health Records
E1340-96 Guide for Rapid Prototyping of Computerized Systems
E1384-02A Practice for Content and Structure of the Electronic Health Record (EHR)
E1467 Specification for Transferring Digital Neurophysiological Data Between Independent Computer Systems
E1633-02A Specification for Coded Values Used in the Electronic Health Record
E1713 Specification for Transferring Digital Waveform Data Between Independent Computer Systems
E1714-00 Guide for Properties of a Universal Healthcare Identifier (UHID)
E1715-01 Practice for An Object-Oriented Model for Registration, Admitting, Discharge, and Transfer (RADT) Functions in Computer-Based Patient Record Systems
E1744-04 Practice for View of Emergency Medical Care in the Electronic Health Record
E1762-95R03 Guide for Electronic Authentication of Health Care Information
E1769 Guide for Properties of Electronic Health Records and Record Systems
E1869-04 Guide for Confidentiality, Privacy, Access, and Data Security Principles for Health Information Including Electronic Health Records
E1902-02 Specification for Management of the Confidentiality and Security of Dictation, Transcription, and Transcribed Health Records
E1959-98 Guide for Requests for Proposals Regarding Medical Transcription Services for Healthcare Institutions
E1985-98 Guide for User Authentication and Authorization
E1986-98 Guide for Information Access Privileges to Health Information
E1987-98 Guide for Individual Rights Regarding Health Information
E1988-98 Guide for Training of Persons who have Access to Health Information
E2017-99 Guide for Amendments to Health Information
E2084-00 Specification for Authentication of Healthcare Information Using Digital Signatures
E2085-00A Guide on Security Framework for Healthcare Information
E2086-00 Guide for Internet and Intranet Healthcare Security
E2087-00 Specification for Quality Indicators for Controlled Health Vocabularies
E2117-00 Guide for Identification and Establishment of a Quality Assurance Program for Medical Transcription
E2145-01 Practice for Modeling in Health Informatics
E2147-01 Specification for Audit and Disclosure Logs for Use in Health Information Systems
E2171-02 Practice for Rating-Scale Measures Relevant to the Electronic Health Record
E2182-02 Specification for Clinical XML DTDs in Healthcare
E2183-02 Guide for XML DTD Design, Architecture and Implementation
E2184-02 Specification for Healthcare Document Formats
E2185-01 Specification for Transferring Digital Voice Data Between Independent Digital Dictation Systems and Workstations
E2210-02 Specification for Guideline Elements Model (GEM)\MDocument Model for Clinical Practice Guidelines
E2211-02 Specification for Relationship Between a Person (Consumer) and a Supplier of an Electronic Personal (Consumer) Health Record
E2212-02A Practice for Healthcare Certificate Policy
E2344-04 Guide for Data Capture through the Dictation Process
E2364-04 Guide to Speech Recognition Technology Products in Health Care
Volume 14.02, July 2005
General Test Methods; Forensic Psychophysiology; Terminology; Conformity Assessment; Statistical Methods
D4356-84R02 Practice for Establishing Consistent Test Method Tolerances
E0011-04 Specification for Wire Cloth and Sieves for Testing Purposes
E0029-04 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E0105-04 Practice for Probability Sampling Of Materials
E0122-00 Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for a Characteristic of a Lot or Process
E0141-91R03 Practice for Acceptance of Evidence Based on the Results of Probability Sampling
E0161-00R04 Specification for Precision Electroformed Sieves
E0177-04E01 Practice for Use of the Terms Precision and Bias in ASTM Test Methods
E0178-02 Practice for Dealing With Outlying Observations
E0228-95 Test Method for Linear Thermal Expansion of Solid Materials With a Vitreous Silica Dilatometer
E0289-04 Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
E0323-80R04 Specification for Perforated-Plate Sieves for Testing Purposes
E0444-98 Descriptions of Scope of Work Relating to Forensic Document Examiners
E0454-80R04 Specification for Industrial Perforated Plate and Screens (Square Opening Series)
E0456-04 Terminology Relating to Quality and Statistics
E0473-04 Terminology Relating to Thermal Analysis and Rheology
E0476-87R01 Test Method for Thermal Instability of Confined Condensed Phase Systems (Confinement Test)
E0487-04 Test Method for Constant-Temperature Stability Of Chemical Materials
E0502-84R00 Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
E0537-02 Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry
E0541-01 Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building
E0548 Guide for General Criteria Used for Evaluating Laboratory Competence
E0582-04 Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
E0620-04 Practice for Reporting Opinions of Scientific or Technical Experts
E0651_E0651M-01 Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
E0659-78R00 Test Method for Autoignition Temperature of Liquid Chemicals
E0674-80R04 Specification for Industrial Perforated Plate and Screens (Round Opening Series)
E0678-98 Practice for Evaluation of Technical Data
E0680-79R05 Test Method for Drop Weight Impact Sensitivity Of Solid-Phase Hazardous Materials
E0681-04 Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
E0691-99 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
E0698-05 Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
E0699-03 Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
E0789-95R01 Test Method for Dust Explosions in a 1.2-Litre Closed Cylindrical Vessel
E0793-01 Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
E0794-01 Test Method for Melting And Crystallization Temperatures By Thermal Analysis
E0799-03 Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
E0831-03 Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
E0860-97 Practice for Examining And Testing Items That Are Or May Become Involved In Litigation
E0918-83R99 Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
E0928-03 Test Method for Purity by Differential Scanning Calorimetry
E0967-03 Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
E0968-02 Practice for Heat Flow Calibration of Differential Scanning Calorimeters
E0994 Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and Recognition
E1020-96 Practice for Reporting Incidents
E1131-03 Test Method for Compositional Analysis by Thermogravimetry
E1142-04 Terminology Relating to Thermophysical Properties
E1169-02 Guide for Conducting Ruggedness Tests
E1187-97 Terminology Relating to Conformity Assessment
E1224 Guide for Categorizing Fields of Capability for Laboratory Accreditation Purposes
E1225-04 Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
E1226-00E01 Test Method for Pressure and Rate of Pressure Rise for Combustible Dusts
E1231-01E01 Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
E1232-02 Test Method for Temperature Limit of Flammability of Chemicals
E1260-03 Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
E1269-05 Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
E1301-95R03 Guide for Proficiency Testing by Interlaboratory Comparisons
E1323-89R02 Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
E1325-02 Terminology Relating to Design of Experiments
E1356-03 Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
E1363-03 Test Method for Temperature Calibration of Thermomechanical Analyzers
E1385-00 Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Steam Distillation
E1386-00 Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
E1387-01 Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography
E1388-00 Practice for Sampling of Headspace Vapors from Fire Debris Samples
E1389 Practice for Cleanup of Fire Debris Sample Extracts by Acid Stripping
E1402-99 Terminology Relating to Sampling
E1412-00 Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
E1413-00 Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
E1422-01 Guide for Test Methods for Forensic Writing Ink Comparison
E1445-03 Terminology Relating to Hazard Potential of Chemicals
E1458-92R01 Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
E1459-92R98 Guide for Physical Evidence Labeling and Related Documentation
E1461-01 Test Method for Thermal Diffusivity by the Flash Method
E1488-02E01 Guide for Statistical Procedures to Use in Developing and Applying Test Methods
E1491-97R02 Test Method for Minimum Autoignition Temperature of Dust Clouds
E1492-92R99 Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
E1515-03A Test Method for Minimum Explosible Concentration of Combustible Dusts
E1530-04 Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
E1545-00 Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
E1579 Guide for Ensuring Data Integrity in Highly Computerized Laboratory Operations
E1580-93R02 Guide for Surveillance of Accredited Laboratories
E1582-04 Practice for Calibration of Temperature Scale for Thermogravimetry
E1588-95R01 Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy\MDispersive Spectroscopy
E1610-02 Guide for Forensic Paint Analysis and Comparison
E1617-97R02 Practice for Reporting Particle Size Characterization Data
E1618-01 Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
E1620-97R04 Terminology Relating to Liquid Particles and Atomization
E1626-02 Guide for Including Government Procurement Requirements in ASTM Documents
E1638-94R04 Terminology Relating to Sieve Analysis
E1640-04 Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
E1641-04 Test Method for Decomposition Kinetics by Thermogravimetry
E1658-04 Terminology for Expressing Conclusions of Forensic Document Examiners
E1719-05 Test Method for Vapor Pressure of Liquids by Ebulliometry
E1732-96AE01 Terminology Relating to Forensic Science
E1738 Guide for Development of a Directory of Accredited Laboratories by an Accrediting Body
E1782-03 Test Method for Determining Vapor Pressure by Thermal Analysis
E1789-04 Guide for Writing Ink Identification
E1824-02 Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension
E1843-96R03 Guide for Sexual Assault Investigation, Examination, and Evidence Collection
E1858-03 Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
E1860-02 Test Method for Elapsed Time Calibration of Thermal Analyzers
E1867-01 Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
E1868-04 Test Method for Loss-On-Drying by Thermogravimetry
E1877-00R05 Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
E1884 Guide for General Requirements for Bodies Operating Assessment and Certification/Registration of Quality Systems
E1904 Guide for General Criteria for a Supplier's Declaration of Conformity
E1905 Guide for General Requirements for Assessment and Accreditation of Certification/Registration Bodies
E1906 Guide for General Requirements for Bodies Operating Product Certification Systems
E1919-03 Guide for Worldwide Published Standards Relating to Particle and Spray Characterization
E1952-01 Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
E1953-02 Practice for Description of Thermal Analysis Apparatus
E1954-05 Practice for Conduct of Research in Psychophysiological Detection of Deception (Polygraph)
E1964-98 Practice for Compiling and Writing Terminology
E1967-98R03 Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
E1968-98R03 Guide for Microcrystal Testing in the Forensic Analysis of Cocaine
E1969-01 Guide for Microcrystal Testing in the Forensic Analysis of Methamphetamine and Amphetamine
E1970-01 Practice for Statistical Treatment of Thermoanalytical Data
E1981-98R04 Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
E1992-99B Terminology Relating to Terminology Management
E1994-98R03 Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
E2000-05 Guide for Minimum Basic Education and Training of Individuals Involved in the Detection of Deception (PDD)
E2008-04 Test Method for Volatility Rate by Thermogravimetry
E2009-02 Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
E2012-00 Guide for the Preparation of a Binary Chemical Compatibility Chart
E2016-99R04E01 Specification for Industrial Woven Wire Cloth
E2019-03 Test Method for Minimum Ignition Energy of a Dust Cloud in Air
E2021-01 Test Method for Hot-Surface Ignition Temperature of Dust Layers
E2031-99R04 Practice for Quality Control of Psychophysiological Detection of Deception (Polygraph) Examinations
E2035-05 Terminology Relating to Forensic Psychophysiology
E2038-99R04 Test Method for Temperature Calibration of Dielectric Analyzers
E2039-04 Test Method for Determining and Reporting Dynamic Dielectric Properties
E2040-03 Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
E2041-03 Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
E2046-03 Test Method for Reaction Induction Time by Thermal Analysis
E2057-00 Specification for Preparation of Laboratory Analysis Requests In Sexual Assault Investigations
E2062-00 Guide for PDD Examination Standards of Practice
E2063-00 Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
E2064-00 Guide for Minimum Continuing Education of Individuals Involved in the Psychophysiological Detection of Deception (PDD)
E2065-02 Guide for Ethical Requirements for Psychophysiological Detection of Deception (PDD) Examiners
E2069-00 Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
E2070-03 Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
E2071-00R05 Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data
E2079-01 Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
E2080-00 Guide for Clinical Psychophysiological Detection of Deception (PDD) Examinations for Sex Offenders
E2092-04 Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
E2113-04 Test Method for Length Change Calibration of Thermomechanical Analyzers
E2123-01 Practice for the Transmittal of Evidence in Sexual Assault Investigation
E2124-01 Practice for the Specification for Equipment and Supplies in Sexual Assault Investigations
E2125-01 Guide for Microcrystal Testing in the Forensic Analysis of Phencyclidine and Its Analogues
E2154-01 Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)
E2159-01 Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts
E2160-04 Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
E2161-01 Terminology Relating to Performance Validation in Thermal Analysis
E2162-01 Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders
E2163-01 Guide for Minimum Training Requirements for Examiners Conducting Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders in Treatment, Probation or Other Similar Programs
E2195-02E01 Terminology Relating to the Examination of Questioned Documents
E2206-02 Method for Force Calibration Of Thermomechnical Analyzers
E2224-02 Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
E2225-02 Guide for Forensic Examination of Fabrics and Cordage
E2227-02 Guide for Forensic Examination of Non-Reactive Dyes in Textile Fibers by Thin-Layer Chromatography
E2228-02 Guide for Microscopic Examination of Textile Fibers
E2229-02 Practices for Interpretation of Psychophysiological Detection of Deception (Polygraph) Data
E2253-03 Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
E2254-03 Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
E2281-03 Practice for Process and Measurement Capability Indices
E2282-03 Guide for Defining the Test Result of a Test Method
E2285-03 Guide for Examination of Mechanical Checkwriter Impressions
E2286-03 Guide for Examination of Dry Seal Impressions
E2287-03 Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text
E2288-03 Guide for Physical Match of Paper Cuts, Tears, and Perforations in Forensic Document Examinations
E2289-03 Guide for Examination of Rubber Stamp Impressions
E2290-03 Guide for Examination of Handwritten Items
E2291-03 Guide for Indentation Examinations
E2292-04 Practice for Investigation of Investigating Carbon Monoxide Poisoning Incidents
E2324-04 Guide for PDD Paired Testing
E2326-04 Practice for Education and Training of Seized-Drug Analysts
E2327-04 Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
E2328-04 Terminology Relating to Seized-Drug Analysis
E2329-04 Practice for Identification of Seized Drugs
E2330-04 Test Method for Determination of Trace Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
E2331-04 Guide for Examination of Altered Documents
E2332-04 Practice for Investigation and Analysis of Physical Component Failures
E2334-03 Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample
E2345-04 Practice for Investigating Electrical Incidents
E2347-04 Test Method for Indentation Softening Temperature by Thermomechanical Analysis
E2386-04 Guide for the Conduct of PDD Screening Examinations
E2403-04 Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
F0311-97R02 Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
F0312-97R03 Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
F0328-98R03 Practice for Calibration of an Airborne Particle Counter Using Monodisperse Spherical Particles
F0649-01 Practice for Secondary Calibration of Airborne Particle Counter Using Comparison Procedures
F0658-00A Practice for Calibration of a Liquid-Borne Particle Counter Using an Optical System Based Upon Light Extinction
Volume 14.03, July 2005
Temperature Measurement
E0001-03A Specification for ASTM Liquid-in-Glass Thermometers
E0077-98R03 Test Method for Inspection and Verification of Thermometers
E0100-03 Specification for ASTM Hydrometers
E0126-92R98 Test Method for Inspection and Verification of Hydrometers
E0207-00 Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
E0220-02 Test Method for Calibration of Thermocouples By Comparison Techniques
E0230-03 Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples
E0235-03 Specification for Thermocouples, Sheathed, Type K and Type N, for Nuclear or for Other High-Reliability Applications
E0344-02 Terminology Relating to Thermometry and Hydrometry
E0452-02 Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
E0563-02E01 Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature
E0574-00 Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
E0585_E0585M-04 Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
E0601-81R97 Test Method for Comparing EMF Stability of Single-Element Base-Metal Thermocouple Materials in Air
E0608_E0608M-00R04 Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
E0644-04 Test Methods for Testing Industrial Resistance Thermometers
E0667-98R03 Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
E0696-00 Specification for Tungsten-Rhenium Alloy Thermocouple Wire
E0710-86R97 Test Method for Comparing EMF Stabilities of Base-Metal Thermoelements in Air Using Dual, Simultaneous, Thermal-EMF Indicators
E0780-92R98 Test Method for Measuring the Insulation Resistance of Sheathed Thermocouple Material at Room Temperature
E0825-98R03 Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
E0839-96 Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Material
E0879-01 Specification for Thermistor Sensors for Clinical Laboratory Temperature Measurements
E0988-96R02 Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium Thermocouples
E1061-01 Specification for Direct-Reading Liquid Crystal Forehead Thermometers
E1104-98R03 Specification for Clinical Thermometer Probe Covers and Sheaths
E1112-00 Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
E1129_E1129M-98R02 Specification for Thermocouple Connectors
E1137_E1137M-04 Specification for Industrial Platinum Resistance Thermometers
E1159-98R03 Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum
E1256-95R01 Test Methods for Radiation Thermometers (Single Waveband Type)
E1299-96R02 Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
E1350-97R01 Guide for Testing Sheathed Thermocouples Prior to, During, and After Installation
E1502-98R03E01 Guide for Use of Freezing-Point Cells for Reference Temperatures
E1594-99 Guide for Expression of Temperature
E1652-03 Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal
Thermocouples
E1684-00 Specification for Miniature Thermocouple Connectors
E1750-02 Guide for Use of Water Triple Point Cells
E1751-00 Guide for Temperature Electromotive Force (EMF) Tables for Non-Letter Designated Thermocouple Combinations
E1965-98R03 Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
E2181_E2181M-01 Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable
E2251-03A Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
Volume 14.04, July 2005
Laboratory Apparatus; Degradation of Materials; SI; Oxygen Fire Safety
D2512-95R02 Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
E0041-92R04 Terminology Relating To Conditioning
E0095-68R01 Specification for Cell-Type Oven With Controlled Rates of Ventilation
E0123-02 Specification for Apparatus for Determination of Water by Distillation
E0124-94R05 Specification for Weighing and Drying Apparatus for Microchemical Analysis
E0128-99 Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
E0133-92R00E01 Specification for Distillation Equipment
E0144-94R01 Practice for Safe Use Of Oxygen Combustion Bombs
E0145-94R01 Specification for Gravity-Convection And\t Forced-Ventilation\t Ovens
E0147-61R01 Specification for Apparatus For Microdetermination Of Nitrogen By Kjeldahl Method
E0175-82R99E01 Terminology of Microscopy
E0191-64R99E01 Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
E0193-94R99 Specification for Laboratory Glass Micropipets
E0205-96R00 Specification for Glass and Oxygen Combustion Flask
E0210-63R99E01 Specification for Microscope Objective Thread
E0211-82R99E01 Specification for Cover Glasses and Glass Slides for Use in Microscopy
E0236-66R01E01 Specification for Apparatus For Microdetermination Of Alkoxyl Groups
E0237-02 Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)
E0287-02 Specification for Laboratory Glass Graduated Burets
E0288-03 Specification for Laboratory Glass Volumetric Flasks
E0319-85R03 Practice for the Evaluation of Single-Pan Mechanical Balances
E0438-92R01E01 Specification for Glasses in Laboratory Apparatus
E0542-01 Practice for Calibration of Laboratory Volumetric Apparatus
E0617-97R03 Specification for Laboratory Weights and Precision Mass Standards
E0632 Practice for Developing Accelerated Tests to Aid Prediction of the Service Life of Building Components and Materials
E0671-98R04 Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
E0672-87R01E01 Specification for Disposable Glass Micropipets
E0675-02 Specification for Interchangeable Taper-Ground Stopcocks And Stoppers
E0676-02 Specification for Interchangeable Taper-Ground Joints
E0677-94R04 Specification for Interchangeable Spherical Ground Joints
E0694-99 Specification for Laboratory Glass Volumetric Apparatus
E0714-94R04 Specification for Disposable Glass Serological Pipets
E0715-80R01 Specification for Gravity-Convection And Forced-Circulation Water Baths
E0732-80R01E01 Specification for Disposable Pasteur-Type Pipet
E0733-80R99E01 Specification for 44.7--L Disposable Glass Micropipets
E0734-80R99E01 Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)
E0784-89R00E01 Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
E0785-81R01 Specification for Crucibles, Ignition, Laboratory, Metal
E0786-81R01 Specification for Dishes, Evaporating, Platinum
E0787-81R01E01 Specification for Disposable Glass Micro Blood Collection Pipets
E0788-97R03 Specification for Pipet, Blood Diluting
E0816-95R02 Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
E0824-94R02 Test Method for Transfer of Calibration From Reference to Field Radiometers
E0832-81R03 Specification for Laboratory Filter Papers
E0890-94R04 Specification for Disposable Glass Culture Tubes
E0898-88R00 Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
E0911-98R04 Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
E0913-82R99 Method for Calibration of Reference Pyranometers With Axis Vertical by the Shading Method
E0920-97R03 Specification for Commercially Packaged Laboratory Apparatus
E0921-97R03 Specification for Export Packaged Laboratory Apparatus
E0923-97R03 Specification for Glass Westergen Tube, Reusable
E0934-94R04 Specification for Serological Pipet, Disposable Plastic
E0941-83R99 Test Method for Calibration of Reference Pyranometers With Axis Tilted by the Shading Method
E0960-93R03 Specification for Laboratory Glass Beakers
E0961-97R03 Specification for Blood Sedimentation Tube, Wintrobe, Glass, Reusable
E0969-02 Specification for Glass Volumetric (Transfer) Pipets
E0982-94R04 Specification for Laboratory Glass Test Tubes
E1043-00 Specification for Pipets, Milk and Cream Examination
E1044-96R01 Specification for Glass Serological Pipets (General Purpose and Kahn)
E1045-00 Specification for Pipet, Sahli Hemoglobin
E1046-85R00E01 Specification for Glass Westergren Tube, Disposable
E1047-85R00E01 Specification for Blood Sedimentation Tube, Wintrobe, Glass, Disposable
E1048-88R99E01 Specification for Color-Coding Pipets or Containers Coated with Anticoagulants
E1092-91R00E01 Specification for Glass Micro Folin Pipet, Disposable
E1093-91R00E01 Specification for Glass Prothrombin Pipet, Disposable
E1094-04 Specification for Pharmaceutical Glass Graduates
E1095-99 Specification for Common Laboratory Glass Funnels
E1096-86R01E01 Specification for Laboratory Glass Separatory Funnels
E1133-86R00 Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
E1154-89R03 Specification for Piston or Plunger Operated Volumetric Apparatus
E1157-87R01E01 Specification for Sampling and Testing of Reusable Laboratory Glassware
E1189-00 Specification for Micro-Burets (Koch Style)
E1270-88R03 Test Method for Equal Arm Balances
E1272-02 Specification for Laboratory Glass Graduated Cylinders
E1273-88R03 Specification for Color Coding of Reusable Laboratory Pipets
E1292-94R01 Specification for Gravity Convection and Forced Ventilation Incubators
E1293-02 Specification for Glass Measuring Pipets
E1377-99 Specification for Laboratory Glass Kjeldahl Flasks
E1378-99 Specification for Laboratory Glass Multiple Neck Distilling/Boiling Flasks
E1379-90R99E01 Specification for Laboratory Glass Dewar Flask
E1380-90R99E01 Specification for Color Coding of Laboratory Pipets with Multiple Graduations, 0.1 mL and Larger, But Excluding Disposable Prothrombin and Disposible Micropipets
E1403-97R03 Specification for Laboratory Glass Boiling Flasks
E1404-94R03 Specification for Laboratory Glass Conical Flasks
E1405-98R03 Specification for Laboratory Glass Distillation Flasks
E1406-95R99 Specification for Laboratory Glass Filter Flasks
E1522-93R03 Specification for Autoclavable Protective Coatings on Laboratory Glassware
E1878-97R03 Specification for Laboratory Glass Volumetric Flasks, Special Use
G0007-05 Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
G0021-96R02 Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
G0024-05 Practice for Conducting Exposures to Daylight Filtered Through Glass
G0029-96R02 Practice for Determining Algal Resistance of Plastic Films
G0063-99 Guide for Evaluating Nonmetallic Materials for Oxygen Service
G0072-01 Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
G0074-01 Test Method for Ignition Sensitivity of Materials to Gaseous Fluid Impact
G0086-98A Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
G0088-90R97E01 Guide for Designing Systems for Oxygen Service
G0090-98 Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
G0093-03E01 Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
G0094-92R98 Guide for Evaluating Metals for Oxygen Service
G0113-03 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
G0114-98 Practice for Aging Oxygen-Service Materials Prior to Ignitibility or Flammability Testing
G0120-01 Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction
G0121-98R04 Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
G0122-96R02 Test Method for Evaluating the Effectiveness of Cleaning Agents
G0124-95R03 Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
G0125-00 Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
G0126-00 Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
G0127-95R00 Guide for the Selection of Cleaning Agents for Oxygen Systems
G0128-02E01 Guide for Control of Hazards and Risks in Oxygen Enriched Systems
G0130-95R02 Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
G0131-96R02 Practice for Cleaning of Materials and Components by Ultrasonic Techniques
G0136-03 Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
G0138-03 Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
G0141-03 Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
G0144-01 Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a HighTemperature Combustion Analyzer
G0145-96R01 Guide for Studying Fire Incidents in Oxygen Systems
G0147-02 Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
G0151-00 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
G0152-05 Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
G0153-04 Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
G0154-04 Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
G0155-04A Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
G0156-02 Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test
G0159-98 Tables for References Solar Spectral Irradiance at Air Mass 1.5: Direct Normal and Hemispherical for a 37|SD Tilted Surface
G0160-03 Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial
G0166-00 Guide for Statistical Analysis of Service Life Data
G0167-00 Test Method for Calibration of a Pyranometer Using a Pyrheliometer
G0169-01 Guide for Application of Basic Statistical Methods to Weathering Tests
G0172-03 Guide for Statistical Analysis of Accelerated Service Life Data
G0173-03 Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37|SD Tilted Surface
G0175-03 Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications
G0177-03 Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37|SD Tilted Surface
G0178-03 Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
G0179-04 Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
G0183-05 Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
Section 15 - General Products, Chemical Specialties, and End Use Products
Volume 15.01, January 2005
Refractories, Activated Carbon; Advanced Ceramics
C0016-03 Test Method for Load Testing Refractory Shapes at High Temperatures
C0020-00 Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
C0024-01 Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
C0027-98R02 Classification of Fireclay and High-Alumina Refractory Brick
C0071-01A Terminology Relating to Refractories
C0092-95R99 Test Methods for Sieve Analysis and Water Content of Refractory Materials
C0108-46R04 Symbols for Heat Transmission
C0113-02 Test Method for Reheat Change of Refractory Brick
C0133-97R03 Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
C0134-95R99 Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
C0135-96R03 Test Method for True Specific Gravity of Refractory Materials by Water Immersion
C0155-97R02 Classification of Insulating Firebrick
C0179-04 Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
C0181-03 Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories
C0182-88R04 Test Method for Thermal Conductivity of Insulating Firebrick
C0198-02 Test Method for Cold Bonding Strength of Refractory Mortar
C0199-84R00 Test Method for Pier Test for Refractory Mortars
C0201-93R04 Test Method for Thermal Conductivity of Refractories
C0202-93R04 Test Method for Thermal Conductivity of Refractory Brick
C0210-95R99 Test Method for Reheat Change of Insulating Firebrick
C0288-87R02 Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
C0357-94R02E01 Test Method for Bulk Density of Granular Refractory Materials
C0401-91R00 Classification of Alumina and Alumina-Silicate Castable Refractories
C0416-97R02 Classification of Silica Refractory Brick
C0417-93R98 Test Method for Thermal Conductivity of Unfired Monolithic Refractories
C0454-83R02 Practice for Disintegration of Carbon Refractories by Alkali
C0455-97R99 Classification of Chrome Brick, Chrome-Magnesia Brick, Magnesia-Chrome Brick, and Magnesia Brick
C0456-93R03 Test Method for Hydration Resistance of Basic Bricks and Shapes
C0467-97R02 Classification of Mullite Refractories
C0492-92R03 Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
C0544-03 Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
C0545-97R02 Classification of Zircon Refractories
C0577-99 Test Method for Permeability of Refractories
C0583-00 Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
C0604-02 Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
C0607-88R00 Practice for Coking Large Shapes of Carbon-Bearing Materials
C0621-84R01 Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
C0673-97R03 Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
C0704-01 Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
C0767-93R04 Test Method for Thermal Conductivity of Carbon Refractories
C0768 Practice for Drip Slag Testing Refractory Materials at High Temperature
C0830-00 Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
C0831-98R03 Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
C0832-00 Test Method of Measuring the Thermal Expansion and Creep of Refractories Under Load
C0860-00 Practice for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
C0861-93R00 Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
C0862-02 Practice for Preparing Refractory Concrete Specimens by Casting
C0863-00 Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
C0865-02 Practice for Firing Refractory Concrete Specimens
C0874-99R04 Practice for Rotary Slag Testing of Refractory Materials
C0885-87R02 Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance
C0899-79R02 Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials
C0903-98R04 Practice for Preparing Refractory Castable Specimens by Cold Gunning
C0909-93R00 Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
C0914-95R04 Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
C0973-87R98 Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
C0974-87R98 Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
C0975-87R98 Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
C0987-00A Practice for Vapor Attack on Refractories for Furnace Superstructures
C1054-03 Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
C1099-92R02 Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
C1100-88R98 Test Method for Ribbon Thermal Shock Testing of Refractory Materials
C1113-99R04 Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
C1145-03 Terminology of Advanced Ceramics
C1161-02C Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
C1171-96R03 Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
C1175-99AR04 Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics
C1190-95R00 Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
C1198-01 Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
C1211-02 Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
C1212-98R04 Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
C1223-92R03 Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
C1239-00 Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
C1259-01 Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration
C1273-95AR00 Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
C1274-00 Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
C1275-00 Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
C1276-94R99 Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer
C1282-00 Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
C1286 Classification for Advanced Ceramics
C1291-00A Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
C1292-00 Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1322-02A Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
C1323-96R01 Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
C1326-03 Test Method for Knoop Indentation Hardness of Advanced Ceramics
C1327-03 Test Method for Vickers Indentation Hardness of Advanced Ceramics
C1331-01 Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
C1332-01 Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
C1336-96R02 Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions
C1337-96R00 Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites under Tensile Loading at Elevated Temperatures
C1341-00 Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
C1358-96R00 Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Specimens at Ambient Temperatures
C1359-96R00 Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Specimens at Elevated Temperatures
C1360-01 Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1361-01 Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
C1366-04 Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
C1368-01 Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature
C1407-98 Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
C1419-99A Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus
C1421-01B Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
C1424-04 Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
C1425-99 Test Method for Interlaminar Shear Strength of 1\ND and 2\ND Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
C1444-00 Test Method for Measuring the Angle of Repose of Free-Flowing Mold Powders
C1445-99 Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
C1446-99 Test Method for Measuring Consistency and Working Time of Self-Flowing Castable Refractories
C1465-00 Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
C1468-00 Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
C1469-00 Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
C1470-00 Guide for Testing the Thermal Properties of Advanced Ceramics
C1494-01 Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
C1495-01 Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
C1499-04 Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
C1525-04 Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
C1547-02 Classification for Fusion-Cast Refractory Blocks and Shapes
C1548-02 Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration
C1557-03E01 Test Method for Tensile Strength and Young's Modulus of Fibers
D2652-94R99 Terminology Relating to Activated Carbon
D2854-96R04 Test Method for Apparent Density of Activated Carbon
D2862-97R04 Test Method for Particle Size Distribution of Granular Activated Carbon
D2866-94R04 Test Method for Total Ash Content of Activated Carbon
D2867-04 Test Methods for Moisture in Activated Carbon
D3379-75R89E01 Test Method for Tensile Strength and Young's Modulus for High-Modulus Single-Filament Materials
D3466-76R98 Test Method for Ignition Temperature of Granular Activated Carbon
D3467-04 Test Method for Carbon Tetrachloride Activity of Activated Carbon
D3802-79R99 Test Method for Ball-Pan Hardness of Activated Carbon
D3803-91R04 Test Method for Nuclear-Grade Activated Carbon
D3838-80R99 Test Method for pH of Activated Carbon
D3860-98R03 Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
D4069-95R03 Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams
D4607-94R99 Test Method for Determination of Iodine Number of Activated Carbon
D5029-98R04 Test Method for Water Solubles in Activated Carbon
D5158-98 Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving
D5159-04 Guide for Dusting Attrition of Granular Activated Carbon
D5160-95R03 Guide for Gas-Phase Adsorption Testing of Activated Carbon
D5228-92R00 Test Method for Determination of the Butane Working Capacity of Activated Carbon
D5742-95R00 Test Method for Determination of the Butane Activity of Activated Carbon
D5832-98R03 Test Method for Volatile Matter Content of Activated Carbon Samples
D5919-96R01 Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
D6385-99 Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing
D6586-03 Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests
D6646-03 Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
D6647-01 Test Method for Determination of Acid Soluble Iron Via Atomic Absorption
D6781-02 Guide for Carbon Reactivation
D6851-02 Test Method for Determination of Contact pH with Activated Carbon
Volume 15.02, April 2005
Glass; Ceramic Whitewares
C0146-94AR04 Test Methods for Chemical Analysis of Glass Sand
C0147-86R00 Test Methods for Internal Pressure Strength of Glass Containers
C0148-00 Test Methods for Polariscopic Examination of Glass Containers
C0149-86R00 Test Method for Thermal Shock Resistance of Glass Containers
C0158-02 Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
C0162-04 Terminology of Glass and Glass Products
C0169-92R00 Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
C0224-78R04E01 Practice for Sampling Glass Containers
C0225-85R04 Test Methods for Resistance of Glass Containers to Chemical Attack
C0242-01 Terminology of Ceramic Whitewares and Related Products
C0322-03 Practice for Sampling Ceramic Whiteware Clays
C0323-56R99 Test Methods for Chemical Analysis of Ceramic Whiteware Clays
C0324-01E01 Test Method for Free Moisture in Ceramic Whiteware Clays
C0325-81R97E01 Test Method for Wet Sieve Analysis of Ceramic Whiteware Clays
C0326-03 Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
C0329-88R99 Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
C0336-71R00 Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
C0338-93R03 Test Method for Softening Point of Glass
C0368-88R99 Test Method for Impact Resistance of Ceramic Tableware
C0370-88R99 Test Method for Moisture Expansion of Fired Whiteware Products
C0371-89R03 Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
C0372-94R01 Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
C0373-88R99 Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products
C0408-88R99 Test Method for Thermal Conductivity of Whiteware Ceramics
C0424-93R99 Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
C0429-01 Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
C0482-02 Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
C0483 Test Method for Electrical Resistance of Conductive Ceramic Tile
C0484-99R03 Test Method for Thermal Shock Resistance of Glazed Ceramic Tile
C0485-83R03 Test Method for Measuring Warpage of Ceramic Tile
C0499-78R03 Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
C0501-84R02 Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
C0502-04 Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
C0554-93R99 Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
C0584-81R99 Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
C0598-93R03 Test Method for Annealing Point and Strain Point of Glass by Beam Bending
C0599 Specification for Conical Process Glass Pipe and Fittings
C0600-85R00 Method of Thermal Shock Test on Glass Pipe
C0601-85R00 Test Method for Pressure Test on Glass Pipe
C0609-90R00 Test Method for Measurement of Small Color Differences Between Ceramic Wall or Floor Tile
C0623-92R00 Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
C0627-93R99 Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
C0648-04 Test Method for Breaking Strength of Ceramic Tile
C0650-04 Test Method for Resistance of Ceramic Tile to Chemical Substances
C0657-93R03 Test Method for D-C Volume Resistivity of Glass
C0674-88R99 Test Methods for Flexural Properties of Ceramic Whiteware Materials
C0675-91R01 Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
C0676-04 Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
C0689-03A Test Method for Modulus of Rupture of Unfired Clays
C0690-03 Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique
C0693-93R03 Test Method for Density of Glass by Buoyancy
C0721 Test Method for Average Particle Size of Alumina and Silica Powders by Air Permeability
C0724-91R00 Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
C0729-75R00 Test Method for Density of Glass by the Sink-Float Comparator
C0730-98R03 Test Method for Knoop Indentation Hardness of Glass
C0735-04 Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers
C0738-94R99 Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
C0770-98R03 Test Method for Measurement of Glass Stress\MOptical Coefficient
C0773-88R99 Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
C0775 Method for Particle-Size Analysis of Whiteware Clays
C0777-04 Test Method for Sulfide Resistance of Ceramic Decorations on Glass
C0813-90R04 Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
C0824-91R00 Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
C0829-81R00 Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
C0837-99R03 Test Method for Methylene Blue Index of Clay
C0848-88R99 Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio For Ceramic Whitewares by Resonance
C0849-88R99 Test Method for Knoop Indentation Hardness of Ceramic Whitewares
C0866-77R97E01 Test Method for Filtration Rate of Ceramic Whiteware Clays
C0867-94R00 Test Method for Soluble Sulfate\tin\tCeramic\tWhiteware\tClays\t(Photometric\tMethod)
C0895-87R03 Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile
C0912-93R03 Practice for Designing a Process for Cleaning Technical Glasses
C0925-79R00 Test Method for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
C0927-80R04 Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
C0949-80R00 Test Method for Porosity in\t Vitreous\t Whitewares\t by\t Dye\t Penetration
C0958-92R00 Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
C0965-96R02 Practice for Measuring Viscosity of Glass Above the Softening Point
C0978-04 Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
C1023-87R99 Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
C1026-87R02 Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
C1027-99R04 Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
C1028-96 Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
C1036-01 Specification for Flat Glass
C1048-04 Specification for Heat-Treated Flat Glass\MKind HS, Kind FT Coated and Uncoated Glass
C1053-00 Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications
C1069-86R04E01 Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
C1070-01 Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
C1172-03 Specification for Laminated Architectural Flat Glass
C1182-91R01 Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
C1203-04 Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
C1243-93R03 Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc
C1256-93R03 Practice for Interpreting Glass Fracture Surface Features
C1279-00E01 Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
C1300-95R01 Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method
C1349-04 Specification for Architectural Flat Glass Clad Polycarbonate
C1350M-96R03 Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa|PYs to Approximately 1013 Pa|PYs) by Beam Bending (Metric)
C1351M-96R02 Test Method for Measurement of Viscosity of Glass Between 10 Pa|PYs and 10 Pa|PYs by Viscous Compression of a Solid Right Cylinder \[Metric\]
C1376-03 Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
C1377-97R03E01 Test Method for Calibration of Surface/Stress Measuring Devices
C1378-04 Test Method for Determination of Resistance to Staining
C1422-99 Specification for Chemically Strengthened Flat Glass
C1426-99R04 Practices for Verification and Calibration of Polarimeters
C1443-99 Specification for Glasses, Portlight, Circular, Fully Tempered
C1464-00 Specification for Bent Glass
C1466-00 Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware
C1503-01 Specification for Silvered Flat Glass Mirror
C1505-01 Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
C1509-02 Specification for Beaded Process Glass Pipe and Fittings
C1510-01 Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
C1545-02 Practice for Dispersing Pigments and Other Materials into Water-Based Suspensions with a High Intensity Mixer
C1605-04 Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry
C1606-04 Test Method for Sampling Protocol for TCLP Testing of Container Glassware
D0116-86R99 Test Methods for Vitrified Ceramic Materials for Electrical Applications
D2442-75R01 Specification for Alumina Ceramics for Electrical and Electronic Applications
F0014-80R00 Practice for Making and Testing Reference Glass-Metal Bead-Seal
F0079-69R00 Specification for Type 101 Sealing Glass
F0105-72R00 Specification for Type 58 Borosilicate Sealing Glass
F0109-04 Terminology Relating to Surface Imperfections on Ceramics
F0140-98R03 Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
F0144-80R00 Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
F0218-95R00 Test Method for Analyzing Stress in Glass
Volume 15.03, October 2005
Space Simulation; Aerospace and Aircraft; Composite Materials
C0271_C0271M-05 Test Method for Density of Sandwich Core Materials
C0272-01 Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
C0273-00E01 Test Method for Shear Properties of Sandwich Core Materials
C0274-99 Terminology of Structural Sandwich Constructions
C0297_C0297M-04 Test Method for Flatwise Tensile Strength of Sandwich Constructions
C0363-00 Test Method for Delamination Strength of Honeycomb Core Materials
C0364-99 Test Method for Edgewise Compressive Strength of Sandwich Constructions
C0365-03 Test Method for Flatwise Compressive Properties of Sandwich Cores
C0366_C0366M-05 Test Methods for Measurement of Thickness of Sandwich Cores
C0393-00 Test Method for Flexural Properties of Sandwich Constructions
C0394-00 Test Method for Shear Fatigue of Sandwich Core Materials
C0480-99R05 Test Method for Flexure Creep of Sandwich Constructions
C0481-99R05 Test Method for Laboratory Aging of Sandwich Constructions
C0613_C0613M-97R03E01 Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
D2344_D2344M-00E01 Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
D2389 Test Method for Minimum Pressure for Vapor Phase Ignition of Monopropellants
D2507 Terminology of Rheological Properties of Gelled Rocket Propellants
D2508 Test Method for Solid Rocket Propellant Specific Impulse Measurements
D2539 Test Method for Shock Sensitivity of Liquid Monopropellants by the Card-Gap Test
D2540 Test Method for Drop-Weight Sensitivity of Liquid Monopropellants
D2541 Test Method for Critical Diameter and Detonation Velocity of Liquid Monopropellants
D3039_D3039M-00E02 Test Method for Tensile Properties of Polymer Matrix Composite Materials
D3171-99R04 Test Methods for Constituent Content of Composite Materials
D3410_D3410M-03 Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
D3479_D3479M-96R02E01 Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
D3518_D3518M-94R01 Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a |m@45|SD Laminate
D3529_D3529M-97R03E01 Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
D3530_D3530M-97R03 Test Method for Volatiles Content of Composite Material Prepreg
D3531-99R04 Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
D3532-99R04 Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
D3544 Guide for Reporting Test Methods and Results on High Modulus Fibers
D3552-96R02 Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
D3800-99R04 Test Method for Density of High-Modulus Fibers
D3878-04A Terminology for Composite Materials
D4018-99R04 Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
D4102-82R04 Test Method for Thermal Oxidative Resistance of Carbon Fibers
D4255_D4255M-01 Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
D4762-04 Guide for Testing Polymer Matrix Composite Materials
D5229_D5229M-92R04 Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
D5379_D5379M-05 Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
D5448_D5448M-93R00 Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
D5449_D5449M-93R00 Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
D5450_D5450M-93R00 Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
D5467_D5467M-97R04 Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
D5528-01 Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
D5687_D5687M-95R02 Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
D5766_D5766M-02A Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
D5961_D5961M-05 Test Method for Bearing Response of Polymer Matrix Composite Laminates
D6115-97R04 Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
D6264-98R04 Test Method for Measuring Damage Resistance of Fiber-Reinforced Polymer-Matrix Composite to Concentrated Quasi-Static Indentation Force
D6415-99E01 Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
D6416_D6416M-01 Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
D6484_D6484M-04 Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
D6507-00 Practice for Fiber Reinforcement Orientation Codes for Composite Materials
D6641_D6641M-01E01 Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture
D6671_D6671M-04E01 Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
D6742_D6742M-02 Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
D6772-02 Test Method for Dimensional Stability of Sandwich Core Materials
D6790-02 Test Method for Determining Poisson's Ratio of Honeycomb Cores
D6856-03 Guide for Testing Fabric-Reinforced |P`Textile|P' Composite Materials
D6873-03 Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
D7078_D7078M-05 Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
D7136_D7136M-05E01 Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
D7137_D7137M-05E01 Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
E0285-80R02 Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
E0295-82R00 Test Method for Measured Speed of Oil Diffusion Pumps
E0296-70R04 Practice for Ionization Gage Application to Space Simulators
E0307-72R02 Test Method for Normal Spectral Emittance at Elevated Temperatures
E0341-96R02 Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
E0349-00 Terminology Relating to Space Simulation
E0377-96R02 Practice for Internal Temperature Measurements in Low-Conductivity Materials
E0408-71R02 Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
E0422-99 Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
E0423-71R02 Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
E0434-71R02 Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
E0457-96R02 Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
E0458-72R02 Test Method for Heat of Ablation
E0459-97 Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
E0471-96R02 Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
E0490-00A Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
E0491-73R04E01 Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
E0511-01 Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
E0512-94R04 Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation
E0595-93R03E02 Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
E0598-96R02 Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
E0637-98 Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
E0639-78R02 Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
E0834-04 Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
E1216-99R05 Practice for Sampling for Particulate Contamination by Tape Lift
E1234-01 Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
E1235-01 Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
E1309-00 Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases
E1434-00 Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases
E1471-92R04 Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases
E1548-03 Practice for Preparation of Aerospace Contamination Control Plans
E1549-95R00E01 Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
E1559-03 Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
E1560-95R01 Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
E1731-95R01 Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
E1997-99R03E01 Practice for the Selection of Spacecraft Materials
E2042-04 Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms
E2088-00 Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
E2089-00 Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications
E2090-00 Test Method for Size-Differentiated Counting of Particles and Fibers Released from Clean Room Wipers Using Optical and Scanning Electron Microscopy
E2217-02 Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
E2311-04 Practice for QCM Measurement of Spacecraft Molecular Contamination in Space
E2312-04 Practice for Tests of Cleanroom Materials
E2352-04 Practice for Aerospace Cleanrooms and Associated Controlled Environments\MCleanroom Operations
F0021-65R02 Test Method for Hydrophobic Surface Films by the Atomizer Test
F0022-02 Test Method for Hydrophobic Surface Films by the Water-Break Test
F0024-04 Test Method for Measuring and Counting Particulate Contamination on Surfaces
F0025-04 Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
F0050-92R01E01 Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
F0051-00R02E01 Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
F0071 Practice for Using the Morphological Key for the Rapid Identification of Fibers for Contamination Control in Electron Devices and Microelectronics
F0091-70R01E01 Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
F0302-04 Practice for Field Sampling of Aerospace Fluids in Containers
F0303-02 Practices for Sampling for Particles in Aerospace Fluids and Components
F0307-02 Practice for Sampling Pressurized Gas for Gas Analysis
F0309-04 Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
F0310-04 Practice for Sampling Cryogenic Aerospace Fluids
F0318-04 Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids
F0319-91AR03 Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
F0320-05 Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures
F0326-96R01E02 Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
F0327-78R00 Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
F0330-89R04 Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
F0331-00 Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
F0359 Practice for Static Immersion Testing of Unstressed Materials in Nitrogen Tetroxide (NO)
F0371 Test Method for Compatibility of Materials with Liquid Oxygen (Reaction Intensity Method)
F0428-03A Test Method for Intensity of Scratches on Aerospace Glass Enclosures
F0482-03 Test Method for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
F0483-98R02E01 Test Method for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
F0484-02 Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds
F0485-02 Test Method for Effects of Cleaners on Unpainted Aircraft Surfaces
F0502-02 Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
F0519-05 Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
F0520-97R04 Test Method for Environmental Resistance of Aerospace Transparencies
F0521-83R04 Test Methods for Bond Integrity of Transparent Laminates
F0548-03AE01 Test Method for Intensity of Scratches on Aerospace Transparent Plastics
F0733-90R03 Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
F0734-95R01 Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
F0735-94R01 Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
F0736-95R01 Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
F0764 Practice for Compatibility of Materials with High-Energy Propellants (Impact Sensitivity Threshold Technique)
F0790-02 Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
F0791-96R02 Test Method for Stress Crazing of Transparent Plastics
F0801-96R02 Test Method for Measuring Optical Angular Deviation of Transparent Parts
F0862-93R02 Test Method for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
F0942-02 Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
F0945-01 Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
F1080-93R02 Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
F1104-02 Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing
F1105-03 Test Method for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
F1110-02 Test Method for Sandwich Corrosion Test
F1111-02 Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
F1113-87R05E01 Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
F1164-97R03 Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
F1165-98R04 Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
F1181-96R03 Test Method for Measuring Binocular Disparity in Transparent Parts
F1252-89R02 Test Method for Measuring Optical Reflectivity of Transparent Materials
F1316-90R02 Test Method for Measuring the Transmissivity of Transparent Parts
F1362-97R03 Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
F1459-93R98E01 Test Method for Determination of the Susceptibility of Metallic Materials to Gaseous Hydrogen Embrittlement
F1624-00 Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
F1645-00 Test Method for Water Migration in Honeycomb Core Materials
F1863-98R04 Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts
F1864-05 Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
F2078-01 Terminology Relating to Hydrogen Embrittlement Testing
F2108-01 Practice for Inspection of Transparent Parts by Prism
F2109-01R05 Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces
F2111-01A Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
F2156-01 Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
F2429-05 Terminology Relating to Aerospace Transparent Materials and Enclosures
F2469-05 Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
Volume 15.04, September 2005
Soaps and Other Detergents; Polishes; Leather; Resilient Floor Coverings
D0459-00 Terminology Relating to Soaps and Other Detergents,
D0460-91R05 Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products
D0500-95R03 Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
D0501-03 Test Methods of Sampling and Chemical Analysis of Alkaline Detergents
D0502-89R03 Test Method for Particle Size of Soaps and Other Detergents
D0800-05 Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions
D0820-93R03 Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
D0928-03 Specification for Sodium Bicarbonate
D1172-95R01 Guide for pH of Aqueous Solutions of Soaps and Detergents
D1173-53R01 Test Method for Foaming Properties of Surface-Active Agents
D1280-00 Test Method of Total Immersion Corrosion Test for Soak Tank Metal Cleaners
D1290-95R02 Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
D1331-89R01 Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
D1342-92R02 Test Method for Paraffin-Type Hydrocarbons in Carnauba Wax
D1386-98R04 Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes
D1387-89R02 Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes
D1436-97R02 Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
D1455-87R02 Test Method for 60|SD Specular Gloss of Emulsion Floor Polish
D1516-00 Test Method for Width of Leather
D1517-04 Terminology Relating to Leather
D1568-05 Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates
D1569-05 Test Methods for Detergent Alkylate
D1570-95R03 Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates
D1610-01 Practice for Conditioning Leather and Leather Products for Testing
D1611-00 Test Method for Corrosion Produced by Leather in Contact with Metal
D1681-05 Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure
D1767-89R03 Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents
D1768-89R03 Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
D1791-93R04 Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes
D1792-82R02 Test Method for Long-Term Removability Properties of Emulsion Floor Polishes
D1793-92R02 Test Method for Water Spotting of Emulsion Floor Polishes
D1813-00R05 Test Method for Measuring Thickness of Leather Test Specimens
D1814-70R05 Test Method for Measuring Thickness of Leather Units
D1815-00R05 Test Method for Water Absorption (Static) of Vegetable Tanned Leather
D1912-00 Test Method for Cold-Crack Resistance of Upholstery Leather
D1913-00 Test Method for Resistance to Wetting of Garment-Type Leathers (Spray Test)
D1986-91R02 Test Method for Determining the Apparent Viscosity of Polyethylene Wax
D2022-89R03 Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches
D2023-89R03 Test Method of Analysis for Sodium Toluene Sulfonate in Detergents
D2024-65R03 Test Method for Cloud Point of Nonionic Surfactants
D2047-04 Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
D2048-92R02 Test Method for Powdering of Floor Polish Films
D2096-00 Test Method for Colorfastness and Transfer of Color in the Washing of Leather
D2097-03 Test Method for Flex Testing of Finish on Upholstery Leather
D2098-04 Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Dow Corning Leather Tester
D2099-05 Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
D2180-89R03 Test Method for Active Oxygen in Bleaching Compounds
D2207-00R05 Test Method for Bursting Strength of Leather by the Ball Method
D2208-00 Test Method for Breaking Strength of Leather by the Grab Method
D2209-00R04 Test Method for Tensile Strength of Leather
D2210-00R04 Test Method for Grain Crack and Extension of Leather by the Mullen Test
D2211-00R05 Test Method for Elongation of Leather
D2212-00R05 Test Method for Slit Tear Resistance of Leather
D2213-00 Test Method for Compressibility of Leather
D2214-02 Test Method for Estimating the Thermal Conductivity of Leather with the Cenco-Fitch Apparatus
D2281-68R05 Test Method for Evaluation of Wetting Agents by the Skein Test
D2322-00R01 Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration
D2346-00R04 Test Method for Apparent Density of Leather
D2347-00R05 Test Method for Measuring Area of Leather Test Specimens
D2357-74R03 for Qualitative Classification of Surfactants by Infrared Absorption
D2358-89R03 Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
D2617-96R01 Test Method for Total Ash in Leather
D2807-93R03 Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)
D2810-01 Test Method for pH of Leather
D2813-03 Practice for Sampling Leather for Physical and Chemical Tests
D2821-00 Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
D2825-02 Terminology Relating to Polishes and Related Materials
D2834-95R02 Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
D2868-96R01 Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather
D2875-00 Test Method for Insoluble Ash of Vegetable-Tanned Leather
D2876-00 Test Method for Water-Soluble Matter of Vegetable-Tanned Leather
D2941-00R04 Test Method for Measuring Break Pattern of Leather (Break Scale)
D2959-95R03 Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
D2960-05 Guide for Controlled Laundering Test Using Naturally Soiled Fabrics and Household Appliances
D3048-89R03 Test Method of Assay for Alkaline Protease
D3049-89R03 Test Method for Synthetic Anionic Ingredient by Cationic Titration
D3050-05 Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)
D3052-87R03 Practice for Rating Water-Emulsion Floor Polishes
D3153-87R02 Test Method for Recoatability of Water-Emulsion Floor Polishes
D3206-92R02 Test Method for Soil Resistance of Floor Polishes
D3207-92R02 Test Method for Detergent Resistance of Floor Polish Films
D3209-93R04 Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes
D3210-95R02 Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
D3430-95R02 Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes
D3440-01 Guide for Preparing Specifications for Water-Emulsion Floor Polishes
D3495-00 Test Method for Hexane Extraction of Leather
D3543-93R02 Test Method for Metal Glide Adhesion
D3556-85R01 Test Method for Deposition on Glassware During Mechanical Dishwashing
D3564-95R02 Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring
D3565-89R01 Test Method for Tableware Pattern Removal by Mechanical Dishwasher Detergents
D3598-89R03 Test Method for Citrate in Synthetic Detergents
D3642-98R04 Test Method for Softening Point of Certain Alkali-Soluble Resins
D3643-98R04 Test Method for Acid Number of Certain Alkali-Soluble Resins
D3644-98R04 Test Method for Acid Number of Styrene-Maleic Anhydride Resins
D3673-89R03 Test Methods for Chemical Analysis of Alpha Olefin Sulfonates
D3716-99 Test Methods for Use of Emulsion Polymers in Floor Polishes
D3751-94R02 Practice for Evaluation of Furniture Polish
D3757-89R99 Guide for Preparing Specifications for Solvent Floor Polishes
D3758-95R03 Practice for Evaluation of Spray-Buff Products on Test Floors
D3790-79R01 Test Method for Volatile Matter (Moisture) of Leather by Oven Drying
D3836-94R99 Practice for Evaluation of Automotive Polish
D3837-95R02 Practice for Preparing a Solution of Alkali\NSoluble Resins
D3897-91R01 Practice for Calculation of Basicity of Chrome Tanning Liquors
D3898-93R03 Test Method for Chromic Oxide in Basic Chromium Tanning Liquors
D3913-03 Test Method for Acidity in Basic Chromium Tanning Liquors
D3954-94R04 Test Method for Dropping Point of Waxes
D4002-81R02 Practice for Evaluation of Buffable Shoe Polish
D4008-95R03 Test Method for Measuring Anti-Soil Deposition Properties of Laundry Detergents (Not Suitable for Detergent Ranking)
D4009-92R97 Test Method for Foam Stability of Hand Dishwashing Detergents
D4078-02 Specification for Water Emulsion Floor Polish
D4095-97R02 Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes
D4103-90R02 Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
D4251-89R03 Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
D4252-89R03 Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
D4265-98 Guide for Evaluating Stain Removal Performance in Home Laundering
D4283-98R04 Test Method for Viscosity of Silicone Fluids
D4330-94R02 Practice for Evaluation of Fiberglass Boat Polish and Wax
D4337-89R03 Test Methods for Analysis of Linear Detergent Alkylates
D4386-95R02 Practice for Application of Floor Polishes to Maintain Multilayer Composite Tile or Flooring
D4488-95R01E01 Guide for Testing Cleaning Performance of Products Intended for Use on Resilient Flooring and Washable Walls
D4576-01 Test Method for Mold Growth Resistance of Wet Blue
D4608-89R03 Test Method for Citrate in Detergents
D4653-87R03 Test Method for Total Chlorides in Leather
D4654-87R03 Test Method for Sulfate Basicity in Leather
D4655-95R01 Test Methods for Sulfates in Leather (Total, Neutral, and Combined Acid)
D4704-00R05 Test Method for Tearing Strength, Tongue Tear of Leather
D4705-00R05 Test Method for Stitch Tear Strength of Leather, Double Hole
D4711-89R03 Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids
D4786-00 Test Method for Stitch Tear Strength Single Hole
D4831-00 Test Method for Buckle Tear Strength of Leather
D4899-99R04 Practice for Analysis of Vegetable Tanning Materials\MGeneral
D4900-99R04 Test Method for Lignosulfonates (Sulfite Cellulose) in Tanning Extracts
D4901-99R04 Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts
D4902-99R04 Test Method for Evaporation and Drying of Analytical Solutions
D4903-99R04 Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
D4904-99R04 Practice for Cooling of Analytical Solutions
D4905-99R04 Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts
D4906-95R01 Test Method for Total Solids and Ash Content in Leather Finishing Materials
D4907-00 Test Method for Nitrocellulose in Finish on Leather
D4954-89R03 Test Method for Determination of Nitrilotriacetates in Detergents
D4955-89R02 Practice for Field Evaluation of Automotive Polish
D5052-00R05 Test Method for Permeability of Leather to Water Vapor
D5053-03E01 Test Method for Colorfastness of Crocking of Leather
D5070-90R05 Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations
D5237-05 Guide for Evaluating Fabric Softeners
D5343-97 Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners
D5346-93R03E01 Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
D5347-95R01 Test Method for Determination of the Ash Content of Fats and Oils
D5348-95R01 Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene
D5349-95R01 Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method
D5350-95R01 Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
D5351-93R03 Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B
D5352-95R01 Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
D5353-95R01 Test Method for Determination of Total Desulfated Fatty Matter
D5354-95R01 Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
D5355-95R01 Test Method for Specific Gravity of Oils and Liquid Fats
D5356-93R03 Test Method for pH of Chrome Tanning Solutions
D5439-95R01 Test Method for Determination of Sediment in Moellon
D5440-93R03 Test Method for Determining the Melting Point of Fats and Oils
D5547-95R03 Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
D5548-05 Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering
D5551-95R01 Test Method for Determination of the Cloud Point of Oil
D5552-00 Test Method for Resistance of Colored Leather to Bleeding
D5553-95R01 Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
D5554-95R01 Test Method for Determination of the Iodine Value of Fats and Oils
D5555-95R01 Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds
D5556-95R01E01 Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fat Liquors and Softening Compounds
D5557-95R01 Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
D5558-95R01 Test Method for Determination of the Saponification Value of Fats and Oils
D5559-95R01 Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence of Ammonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils
D5560-95R01 Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils
D5562-95R01 Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps
D5564-95R01 Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils
D5565-95R01 Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils
D5566-95R01 Test Method for Determination of Inorganic Salt Content of Sulfated and Sulfonated Oils
D5678-95R02 Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish
D5806-95R03 Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration
D6012-03 Test Method for Determination of Resistance of Leather to (Bleeding) Color Stain Transfer
D6013-00 Test Method for Determination of Area Stability of Leather to Laundering
D6014-00 Test Method for Determination of Dynamic Water Absorption of Leather Surfaces
D6015-00R01 Test Method for Static Water Absorption of Leather
D6016-96R01 Test Method for Determination of Nitrogen, Water Extractable in Leather
D6017-97R03 Test Method for Determination of Magnesium Sulfate (Epsom Salt) in Leather
D6018-96R01 Test Method for Determining the Presence of Lead Salts in Leather
D6019-96R01 Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
D6020-00 Practice for Calculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage
D6075-00 Test Method for Cracking Resistance of Leather
D6076-03 Test Method for Shrinkage Temperature of Leather
D6077-00 Test Method for Trapezoid Tearing Strength of Leather
D6116-00 Test Method for Blocking
D6173-97R05 Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration
D6174-01 Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
D6182-00R05 Test Method for Flexibility and Adhesion of Finish on Leather
D6183-00R05 Test Method for Tackiness of Finish on Leather
D6205-98 Practice for Calibration of the James Static Coefficient of Friction Machine
D6215 Guide for Removal of Oily Soils from Metal Surfaces
D6401-99R04 Test Method for Determining Non-Tannins and Tannin in Extracts of Vegetable Tanning Materials
D6402-99R04 Test Method for Determining Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
D6403-99R04 Test Method for Determining Moisture in Raw and Spent Materials
D6404-99R04 Practice for Sampling Vegetable Materials Containing Tannin
D6405-99R04 Practice for Extraction of Tannins from Raw and Spent Materials
D6406-99R04 Test Method for Analysis of Sugar in Vegetable Tanning Materials
D6407-99R04 Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
D6408-99R04 Test Method for Analysis of Tannery Liquors
D6409-99R04 Practice for Color Tests with Sheepskin Skiver
D6410-99R04 Test Method for Determining Acidity of Vegetable Tanning Liquors
D6625-01 Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
D6656-01 Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
D6657-01 Test Method for pH of Wet Blue
D6658-01 Test Method for Volatile Matter (Moisture) of Wet Blue by Oven Drying
D6659-01 Practice for Sampling and Preparation of Wet Blue for Physical and Chemical Tests
D6714-01 Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)
D6715-01 Practice for Sampling and Preparation of Salt Preserved (Cured) Hides and Skins for Chemical and Physical Tests
D6716-01 Test Method for Total Ash in Wet Blue
D6827-02 Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)
E1907-04 Guide to Methods of Evaluating Moisture Conditions of Concrete Floors to Receive Resilient Floor Coverings
F0137-03 Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
F0141-04 Terminology Relating to Resilient Floor Coverings
F0142-93R00E01 Test Method for Indentation of Resilient Floor Tiles (McBurney Test)
F0150-98 Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
F0373-01 Test Method for Embossed Depth of Resilient Floor Coverings
F0386-02 Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
F0387-02 Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
F0410-02 Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
F0510-93R04 Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
F0511-04 Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile
F0536 Test Method for Size of Resilient Floor Tile by Dial Gage Method
F0540 Test Method for Squareness of Resilient Floor Tile by Gage Method
F0693-01 Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
F0710-05 Practice for Preparing Concrete Floors to Receive Resilient Flooring
F0924-90R04 Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings
F0925-02 Test Method for Resistance to Chemicals of Resilient Flooring
F0970-00 Test Method for Static Load Limit
F1037-04 Test Method for Visual Rating of Appearance of Resilient Floors After In-Service Exposure to Foot Traffic
F1066-04 Specification for Vinyl Composition Floor Tile
F1265-03A Test Method for Resistance to Impact for Resilient Floor Tile
F1303-04 Specification for Sheet Vinyl Floor Covering with Backing
F1304-03 Test Method for Deflection of Resilient Floor Tile
F1344-04 Specification for Rubber Floor Tile
F1482-04 Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring
F1514-03 Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
F1515-03 Test Method for Measuring Light Stability of Resilient Flooring by Color Change
F1516-03 Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)
F1700-04 Specification for Solid Vinyl Floor Tile
F1859-04 Specification for Rubber Sheet Floor Covering Without Backing
F1860-04 Specification for Rubber Sheet Floor Covering With Backing
F1861-02 Specification for Resilient Wall Base
F1869-04 Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
F1913-04 Specification for Vinyl Sheet Floor Covering Without Backing
F1914-05 Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
F2034-03 Specification for Sheet Linoleum Floor Covering
F2055-00 Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
F2169-02 Specification for Resilient Stair Treads
F2170-02 Test Method for Determining Relative Humidity in Concrete Floor Slabs Using Probes
F2195-03 Specification for Linoleum Floor Tile
F2199-02 Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat
F2419-05 Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
F2420-05 Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood
F2421-05 Test Method for Measurement of Resilient Floor Plank by Dial Gage
F2471-05 Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
Volume 15.05, August 2005
Engine Coolants; Halogenated Organic Solvents and Fire Extinguishing Agents; Industrial and Specialty Chemicals
D0891-95R04 Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
D1119-05 Test Method for Percent Ash Content of Engine Coolants
D1120-94R04 Test Method for Boiling Point of Engine Coolants
D1121-98R03 Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
D1122-97AR02 Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
D1123-99R03 Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
D1176-98R02 Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
D1177-94R98E01 Test Method for Freezing Point of Aqueous Engine Coolants
D1287-91R02 Test Method for pH of Engine Coolants and Antirusts
D1384-04 Test Method for Corrosion Test for Engine Coolants in Glassware
D1881-97R02E01 Test Method for Foaming Tendencies of Engine Coolants in Glassware
D1882-96R01 Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
D1901-00R04 Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
D2106-05 Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
D2108-97R01 Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)
D2109-01 Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures
D2110-00 Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures
D2111-02 Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures
D2251-96R04 Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures
D2570-96R02 Test Method for Simulated Service Corrosion Testing of Engine Coolants
D2758-94R03 Test Method for Engine Coolants by Engine Dynamometer
D2809-04 Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
D2847-99R04 Practice for Testing Engine Coolants in Car and Light Truck Service
D2942-02 Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)
D2943-02 Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
D2988-96R05 Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
D2989-01E01 Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures
D3147-94R99 Test Method for Testing Stop-Leak Additives for Engine Coolants
D3306-03 Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
D3316-96R00 Test Method for Stability of Perchloroethylene with Copper
D3321-94R02 Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
D3401-97R01 Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
D3443-00R05 Test Method for Chloride in Trichlorotrifluoroethane
D3444-00R05 Test Method for Total Acid Number of Trichlorotrifluoroethane
D3447 Test Method for Purity of Halogenated Organic Solvents
D3448-85R05 Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
D3585-98R02 Specification for ASTM Reference Fluid for Coolant Tests
D3634-99E01 Test Method for Trace Chloride Ion in Engine Coolants
D3698-04 Practice for Solvent Vapor Degreasing Operations
D3741-00R04 Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents
D3844-02 Guide for Labeling Chlorinated Hydrocarbon Solvent Containers
D4079-00 Specification for Vapor-Degreasing Grade Methylene Chloride
D4080-00 Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
D4081-00 Specification for Drycleaning-Grade Perchloroethylene
D4126-02 Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane
D4276-02 Practice for Confined Area Entry
D4340-96R01 Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting\t Conditions
D4376-02 Specification for Vapor-Degreasing Grade Perchloroethylene
D4494-95R04 Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene
D4579-00 Practice for Handling an Acid Degreaser or Still
D4701-00 Specification for Technical Grade Methylene Chloride
D4725-04 Terminology for Engine Coolants
D4755-95R04 Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures
D4757 Practice for Placarding Solvent Vapor Degreasers
D4921-95R00 Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
D4985-03 Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
D4995-04 Specification for Electronic and Degreasing Grades of 1,1,2\NTrichloro 1,2,2,\NTrifluoroethane Solvent
D5223 Specification for Engine Coolant Grade Propylene Glycol
D5248-04 Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
D5320 Test Methods for Determination of 1,1,1-Trichloroethane and Methylene Chloride Content in Stabilized Trichloroethylene and Tetrachloroethylene
D5394-02 Specification for Reclaimed 1,1,1-Trichloroethane
D5395-03 Specification for Reclaimed Methylene Chloride,
D5396-04 Specification for Reclaimed Perchloroethylene
D5616-04 Specification for Reclaimed Trichloroethylene
D5631-00 Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane (CFBR)
D5632-01 Specification for Halon 1301, Bromotrifluoromethane (CFBr)
D5752-04A Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
D5827-95R02 Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
D5828-97R02 Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
D5931-96R02 Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
D5960-03 Specification for Technical Grade Ethylene Dichloride
D6064-03 Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF 3)
D6065-00 Practice for Handling, Transportation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CFCHFCF)
D6107-97R02 Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
D6126-97R03E01 Specification for HFC-23 (Trifluoromethane, CHF)
D6127-03 Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF3)
D6129-97R02 Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
D6130-97AR03 Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
D6208-97R02 Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
D6210-04 Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
D6211 Specification for Fully-Formulated Propylene Glycol-Base Engine Coolant for Heavy-Duty Engines
D6231-98R03 Specification for HFC-125 (Pentafluoroethane, CHF)
D6268-98R03 Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (CHF)
D6361-98R04E01 Guide for Selecting Cleaning Agents and Processes
D6368-05 Specification for Vapor-Degreasing Grade and General Grade -Propyl Bromide
D6427-99R04 Practice for Handling, Transportation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CFCHCF)
D6471-03 Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume \% Minimum) for Automobile and Light-Duty Service
D6472-03 Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
D6505-00 Test Method for Assay of -Propyl Bromide Content
D6541-00 Specification for HFC-236fa, 1,1,1,3,3,3\NHexafluoropropane, (CFCHCF)
D6660-01 Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
D6806-02 Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
D7122-05 Specification for HCFC Blend B (CFCClH, Ar, and CF)
D7123-04 Practice for Handling, Transportation, and Storage of HCFC Blend B (CFCClH, Ar, and CF)
E0070-97R02 Test Method for pH of Aqueous Solutions With the Glass Electrode
E0180-03 Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals
E0200-97R01E01 Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
E0202-04 Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
E0203-01 Test Method for Water Using Volumetric Karl Fischer Titration
E0222-00R05E01 Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation
E0223-96R02E01 Test Methods for Analysis of Sulfuric Acid
E0224-96R02 Test Methods for Analysis of Hydrochloric Acid
E0234-98R03E01 Test Method for Total Bromine Number of Unsaturated Aliphatic Chemicals
E0256-98R03E01 Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition
E0257-98R03E01 Test Method for Sulfur in Organic Compounds by Sodium Peroxide Bomb Ignition
E0258-67R02 Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method
E0271 Test Methods for Analysis of Aqueous Hydrofluoric Acid
E0291-04 Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
E0298-01 Test Methods for Assay of Organic Peroxides
E0299-97R02 Test Method for Trace Amounts of Peroxides In Organic Solvents
E0300-03 Practice for Sampling Industrial Chemicals
E0346-99R03 Test Methods for Analysis of Methanol
E0347 Test Method for Ash in Polybasic Acids
E0357-98R03E01 Test Method for Phosphorus in Organic Compounds by Sodium Peroxide Bomb Ignition
E0359-00R05E01 Test Methods for Analysis of Soda Ash (Sodium Carbonate)
E0394-00R04 Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
E0410-98R03 Test Method for Moisture and Residue in Liquid Chlorine
E0411-05 Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
E0449-96R01 Test Methods for Analysis of Calcium Chloride
E0475-00 Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography
E0506-98R03 Test Method for Mercury in Liquid Chlorine
E0533 Test Method for Trace Amounts of Arsenic in Inorganic Industrial Chemicals
E0534-98R03 Test Methods for Chemical Analysis of Sodium Chloride
E0538-98R03E01 Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
E0611-03 Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
E0649-00R05E01 Test Method for Bromine in Chlorine
E0755-94R03 Test Method for Dicumyl Peroxide, Assay (Liquid Chromatography)
E0806-99R03 Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)
E0819 Test Method for Trace Amounts of Arsenic in Organic Industrial Chemicals
E1064-04A Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
E1090-96R02 Test Method for Dicumyl Peroxide and Dicumyl Peroxide Decomposition Products in Resins
E1119-97R02 Specification for Industrial Grade Ethylene Glycol
E1120-97R02 Specification for Liquid Chlorine
E1146-97R02 Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)
E1177-03A Specification for Engine Coolant Grade Glycol
E1178-97R02 Test Methods for Analysis of Acrylonitrile
E1228-94R03E01 Test Method for Assay of Peroxy Esters\MCatalyzed Iodometric Procedure
E1229-93R02 Specification for Calcium Hypochlorite
E1456-97R02 Specification for Caustic Potash; Solid (Potassium Hydroxide; Solid)
E1506-97R03 Test Methods for Analysis of Acid-Grade Calcium Fluoride (Fluorspar)
E1547-99R03 Terminology Relating to Industrial and Specialty Chemicals
E1584-00 Test Method for Assay of Nitric Acid
E1615-04 Test Method for Iron in Trace Quantities Using the FerroZine Method
E1616-94R02E01 Test Method for Analysis of Acetic Anhydride Using Gas Chromatography
E1746-95R01E01 Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
E1754-95R01E01 Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
E1784-97R02 Test Method for Total Peroxides in Acrylonitrile
E1786-02 Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
E1787-02 Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
E1788-96R03 Test Method for Acidity in Acrylonitrile
E1863-97R02 Test Method for Analysis of Acrylonitrile by Gas Chromatography
E1899-02 Test Method for Hydroxyl Groups Using Reaction with -Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide
E2036-01 Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
E2037-01 Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
E2193-04 Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
E2313-04 Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)
E2409-04 Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol (Gas Chromatographic Method)
Volume 15.06, August 2005
Adhesives
C0557-03 Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
D0896-04 Practice for Resistance of Adhesive Bonds to Chemical Reagents
D0897-01 Test Method for Tensile Properties of Adhesive Bonds
D0898-05 Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids
D0899-00 Practice for Applied Weight Per Unit Area of Liquid Adhesive
D0903-98R04 Test Method for Peel or Stripping Strength of Adhesive Bonds
D0904-99R05 Practice for Exposure of Adhesive Specimens to Artificial Light
D0905-03 Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
D0906-98R04 Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
D0907-05 Terminology of Adhesives
D0950-03 Test Method for Impact Strength of Adhesive Bonds
D1002-01 Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
D1062-02 Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
D1084-97R05 Test Methods for Viscosity of Adhesives
D1101-97A Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
D1144-99R05 Practice for Determining Strength Development of Adhesive Bonds
D1146-00 Test Method for Blocking Point of Potentially Adhesive Layers
D1151-00 Practice for Effect of Moisture and Temperature on Adhesive Bonds
D1183-03 Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
D1184-98R04 Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
D1304-99R05 Test Methods for Adhesives Relative to Their Use as Electrical Insulation
D1337-04 Practice for Storage Life of Adhesives by Viscosity and Bond Strength
D1338-99R05 Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
D1488-00 Test Method for Amylaceous Matter in Adhesives
D1489-97R04 Test Method for Nonvolatile Content of Aqueous Adhesives
D1490-01 Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
D1579-01 Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives
D1582-98R04 Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
D1583-01 Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
D1779-98R04 Specification for Adhesive for Acoustical Materials
D1780-05 Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
D1781-98R04 Test Method for Climbing Drum Peel for Adhesives
D1828-01 Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
D1874-62R04 Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases
D1875-03 Test Method for Density of Adhesives in Fluid Form
D1876-01 Test Method for Peel Resistance of Adhesives (T-Peel Test)
D1879-99 Practice for Exposure of Adhesive Specimens to High-Energy Radiation
D1916 Test Method for Penetration of Adhesives
D1994-95R00 Test Method for Determination of Acid Numbers of Hot-Melt Adhesives
D1995-92R04 Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
D2093-03 Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
D2094-00 Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
D2095-96R02 Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
D2293-96R02 Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
D2294-96R02 Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
D2295-96R02 Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
D2339-98R04 Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
D2556-93AR97 Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties
D2557-98R04 Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from \-267.8 to \-55|SDC (\-450 to \-67|SDF)
D2559-04 Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
D2651-01 Guide for Preparation of Metal Surfaces for Adhesive Bonding
D2674-72R04E01 Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
D2739-97R04 Test Method for Volume Resistivity of Conductive Adhesives
D2851-98R04 Specification for Liquid Optical Adhesive
D2918-99R05 Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
D2919-01 Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
D2979-01 Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine
D3111-99R04E01 Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
D3121-94R99 Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
D3163-01 Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
D3164-03 Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
D3164M-03 Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
D3165-00 Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
D3166-99R05 Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
D3167-03AR04 Test Method for Floating Roller Peel Resistance of Adhesives
D3310-00 Test Method for Determining Corrosivity of Adhesive Materials
D3433-99R05 Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
D3434-00 Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
D3482-90R00 Test Method for Determining Electrolytic Corrosion of Copper by Adhesives
D3498-03 Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems
D3528-96R02 Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
D3535-00 Test Method for Resistance to Deformation Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior (Wet Use) Exposure Conditions
D3632-98R04 Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
D3658-01 Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
D3762-03 Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)
D3807-98R04 Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
D3808-01 Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
D3929-03 Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
D3930-93AR05 Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
D3931-93AR05 Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
D3933-98R04 Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
D3983-98R04 Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
D4027-98R04 Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
D4300-01 Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
D4317-98R04 Specification for Polyvinyl Acetate-Based Emulsion Adhesives
D4338-97R04 Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
D4339-01 Test Method for Determination of the Odor of Adhesives
D4426-01 Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating
D4497-94R04E01 Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)
D4498-00 Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
D4499-95R00 Test Method for Heat Stability of Hot-Melt Adhesives
D4501-01 Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
D4502-92R04 Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints
D4562-01 Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
D4680-98R04 Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
D4688-99R05 Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
D4689-99R05 Specification for Adhesive, Casein-Type
D4690-99R05 Specification for Urea-Formaldehyde Resin Adhesives
D4783-01 Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
D4800-94R05 Guide for Classifying and Specifying Adhesives
D4896-01 Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
D5040-90R97E01 Test Methods for Ash Content of Adhesives
D5041-98R04 Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
D5113-97 Test Method for Determining Adhesive Attack on Rigid Cellular Foam
D5215-93R05 Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
D5266-99R05 Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints
D5267-97 Test Method for Determination of Extrudability of Cartridge Adhesives
D5363-03 Specification for Anaerobic Single-Component Adhesives (AN)
D5572-95R05 Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
D5573-99R05 Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
D5574-94R05 Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints
D5648-01 Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
D5649-01 Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
D5656-04 Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
D5657-01 Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
D5751-99R05 Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
D5824-98R03 Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
D5868-01 Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
D5999 Test Method for Noninterference of Adhesives in Repulping
D6004-04 Test Method for Determining Adhesive Shear Strength of Carpet Adhesives
D6005-03 Test Method for Determining Slump Resistance of Carpet Adhesives
D6105-04 Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
D6195-03 Test Methods for Loop Tack
D6325-98R04 Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
D6396-99R05 Test Method for Testing of Pipe Thread Sealants on Pipe Tees
D6411_D6411M-99R05 Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
D6412_D6412M-99 Specification for Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials
D6463-99 Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
D6464-03A Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
D6465-99R05 Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
D6862-04 Test Method for 90 Degree Peel Resistance of Adhesives
E0229 Test Method for Shear Strength and Shear Modulus of Structural Adhesives
Volume 15.07, November 2005
Sports Equipment and Facilities; Pedestrian Walkway; Safety and Footwear; Amusement Rides and Devices; Consumer Products; Snow Skiing; Light Sport Aircraft; Unmanned Air Vehicle Systems; Normal and Utility
Category Airplane Electrical Wiring Systems
D5859 Test Method for Determining the Traction of Footwear on Painted Surfaces Using the Variable Incidence Tester
F0355-01 Test Method for Shock-Absorbing Properties of Playing Surface Systems and Materials
F0381-04 Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
F0400-04 Consumer Safety Specification for Lighters
F0404-04 Consumer Safety Specification for High Chairs
F0406-05 Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
F0429-01 Test Method for Shock-Attenuation Characteristics of Protective Headgear for Football
F0444-88R04E01 Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas
F0445-88R04E01 Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas
F0446-85R04E01 Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area
F0462-79R99 Consumer Safety Specification for Slip-Resistant Bathing Facilities
F0472-92R98 Terminology for Geometry of Alpine Skis
F0473-96R03 Specification for Binding Mounting Area Dimensions on Alpine Skis and Bindings
F0474 Specification for Static Screw-Retention Strength of Binding Mounting Area on Alpine Skis
F0475 Specification for Test Screw Used in Screw-Retention Test of Binding Mounting Area on Alpine Skis
F0489 Test Method for Using a James Machine
F0498-77R98 Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis
F0504-05 Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings
F0513-00 Safety Specification for Eye and Face Protective Equipment for Hockey Players
F0539-01 Practice for Fitting Athletic Footwear
F0589-00 Consumer Safety Specification for Non-Powder Guns
F0590-92R00 Consumer Safety Specification for Non-Powder Gun Projectiles and Propellants
F0609-96E01 Test Method for Using a Horizontal Pull Slipmeter (HPS)
F0659-98E01 Specification for Skier Goggles and Faceshields
F0694-02E01 Test Method for Heel-Attaching Strength of Women's Shoes
F0695-01 Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, and Related Materials
F0697-00 Practice for Care and Use of Athletic Mouth Protectors
F0698-94R00 Specification for Physical Information to be Provided for Amusement Rides and Devices
F0717-89R00 Specification for Football Helmets
F0747-97 Terminology Relating to Amusement Rides and Devices
F0770-93R00 Practice for Operation Procedures for Amusement Rides and Devices
F0779-93R98 Test Method for Torsion Characteristic of Alpine Skis
F0780-93AR98 Test Method for Linear Deformation and Breaking Strength of Alpine Skis
F0793-93R04 Classification of Wallcovering by Durability Characteristics
F0802-83R03 Guide for Selection of Certain Walkway Surfaces When Considering Footwear Traction
F0803-03 Specification for Eye Protectors for Selected Sports
F0833-05 Consumer Safety Performance Specification for Carriages and Strollers
F0834-84R99 Consumer Safety Specification for Toy Chests
F0839-83R98 Specification for Cautionary Labeling of Portable Gasoline Containers for Consumer Use
F0846-92R03 Guide for Testing Performance of Amusement Rides and Devices
F0851-87R05 Test Method for Self-Rising Seat Mechanisms
F0852-99E01 Specification for Portable Gasoline Containers for Consumer Use
F0853-04 Practice for Maintenance Procedures for Amusement Rides and Devices
F0869-01 Terminology Relating to Athletic Shoes and Biomechanics
F0893-05 Guide for Inspection of Amusement Rides and Devices
F0910-04 Specification for Face Guards for Youth Baseball
F0926-02 Specification for Cautionary Labeling of Portable Kerosine and Diesel Containers for Consumer Use
F0939-05A Practice for Selection of Release Torque Values for Alpine Ski Bindings
F0944 Specification for Properties of Adult Alpine Ski Boots
F0963-03 Consumer Safety Specification for Toy Safety
F0966-00 Consumer Safety Specification for Full-Size and Non-Full-Size Baby Crib Corner Post Extensions
F0976-02 Specification for Portable Kerosine and Diesel Containers for Consumer Use
F0977-03 Consumer Safety Specification for Infant Walkers
F1004-04 Consumer Safety Specification for Expansion Gates and Expandable Enclosures
F1015-03 Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces
F1017 Test Method for Testing Lateral Toe Release of Adult Alpine Ski Bindings Under Impact Loading
F1045-04 Performance Specification for Ice Hockey Helmets
F1061-97R03 Specification for Ski Binding Test Devices
F1062-97R03 Test Method for Verification of Ski Binding Test Devices
F1063-04 Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems
F1064-03 Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications
F1081-97R03E01 Specification for Competition Wrestling Mats
F1107-04 Terminology Relating to Snowboarding
F1141-93R04 Specification for Wallcovering
F1148-03 Consumer Safety Performance Specification for Home Playground Equipment
F1159-03A Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures
F1162-02 Specification for Pole Vault Landing Systems
F1163-04A Specification for Protective Headgear Used in Horse Sports and Horseback Riding
F1169-03 Specification for Full-Size Baby Crib
F1193-04B Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements
F1235-03 Consumer Safety Specification for Portable Hook-On Chairs
F1240-01 Guide for Ranking Footwear Bottom Materials on Contaminated Walkway Surfaces According to Slip Resistance Test Results
F1250-00 Safety Specification for Stationary Exercise Bicycles
F1292-04 Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment
F1305-94R02 Guide for Classification of Amusement Ride and Device Related Injuries and Illnesses
F1313-90R99 Specification for Volatile -Nitrosamine Levels in Rubber Nipples on Pacifiers
F1346-91R03 Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs
F1352-02 Guide for Fixed Blade Broadhead Performance and Safety Standards
F1363-02 Guide for Reduction of Risk of Injury for Archery Overdraws
F1427-04E01 Consumer Safety Specification for Bunk Beds
F1435-04 Specification for Designation of the Balance Point Location for Archery Arrows
F1436-02 Guide for Center Serving Diameter Dimensions for Archery Bow Strings
F1446-04 Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
F1447-02 Specification for Helmets Used in Recreational Bicycling or Roller Skating
F1487-05 Consumer Safety Performance Specification for Playground Equipment for Public Use
F1492-00 Specifications for Helmets Used in Skateboarding and Trick Roller Skating
F1543-96R02E01 Specification for Shock Attenuation Properties of Fencing Surfaces
F1544-04 Specification for Determining the Rating Velocities of an Archery Bow
F1551-03 Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials
F1561-03 Performance Requirements for Plastic Chairs for Outdoor Use
F1562-95R05 Guide for Use-Oriented Foreign Language Instruction
F1566-99R04 Test Methods for Evaluation of Innersprings and Boxsprings
F1587-99R05 Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders
F1614-99 Test Method for Shock Attenuating Properties of Materials Systems for Athletic Footwear
F1615-95R04 Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
F1625-00 Specification and Test Method for Rear-Mounted Bicycle Child Carriers
F1631 Test Method for Impact Attenuation Properties of Body Padding and Protective Wear for the Sport of Fencing
F1632-03 Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
F1637-02E01 Practice for Safe Walking Surfaces
F1646-05E01 Terminology Relating to Safety and Traction for Footwear
F1647-02A Test Methods for Organic Matter Content of Putting Green and Sports Turf Root Zone Mixes
F1648-95R03 Test Methods for Archery Bowstring Component\MServing String Material
F1676-96R03 Specification for Basic Tumbling Mats
F1677-05 Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)
F1678 Test Method for Using a Portable Articulated Strut Slip Tester (PAST)
F1679-04E01 Test Method for Using a Variable Incidence Tribometer (VIT)
F1694-96R04 Guide for Composing Walkway Surface Evaluation and Incident Report Forms for Slips, Stumbles, Trips, and Falls
F1702-96R02E01 Test Method for Measuring Shock-Attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus
F1703-04 Guide for Ice Hockey Playing Facilities
F1720-96R04 Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin
F1722-96R03 Test Method for Determining Mass and Moment of Inertia of Alpine Skis
F1749-02 Specification for Fitness Equipment and Fitness Facility Safety Signage and Labels
F1750-96 Specification for Paintball Gun Threaded-Propellant Source Interface
F1751 Specification for Helmets Used in Recreational Roller Skating
F1752-96R01 Test Method for Archery Bow Component\MCord Material
F1753-96R01 Specification for Classification and Marking of Single-Lens Scopes for Use with Archery Bows
F1772-99 Specification for Climbing Harnesses
F1773-97R04 Terminology Relating to Climbing and Mountaineering Equipment and Practices
F1774-99 Specification for Climbing and Mountaineering Carabiners
F1775-97R04 Specification for Labeling of Climbing and Mountaineering Equipment
F1776-01 Specification for Eye Protective Devices for Paintball Sports
F1777-02 Practice for Paintball Field Operation
F1815-97 Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, Particle Density, and Bulk Density of Putting Green and Sports Turf Root Zones
F1816-97R04 Safety Specification for Drawstrings on Children's Upper Outerwear
F1821-03A Standard Consumer Safety Specification for Toddler Beds
F1822-97 Consumer Safety Specification for Non-Full-Size Baby Cribs
F1832-97R02 Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
F1833-97 Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
F1838-98R04E01 Performance Requirements for Child's Plastic Chairs for Outdoor Use
F1849-00 Specification for Helmets Used in Short Track Speed Ice Skating (Not to Include Hockey)
F1853-03 Test Method for Measuring Sleeping Bag Packing Volume
F1858-98R04E01 Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use
F1880-98R04 Test Method for the Determination of Percent of Let-Off for Archery Bows
F1881-04 Test Method for Measuring Baseball Bat Performance Factor
F1882-04 Specification for Residential Basketball Systems
F1887-02 Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
F1888-02 Test Method for Compression-Displacement of Baseballs and Softballs
F1889-98R04 Guide for Straightness Measurement of Arrow Shafts
F1890-04 Test Method for Measuring Softball Bat Performance Factor
F1898-01 Specification for Helmets for Non-Motorized Wheeled Vehicle Used by Infants and Toddlers
F1900-98R04 Test Method for Water Resistance of Footwear Using a Walking Step Simulator
F1912-98R04 Specification for Safety of Bean Bag Chairs
F1917-00 Consumer Safety Performance Specification for Infant Bedding and Related Accessories
F1918-04 Safety Performance Specification for Soft Contained Play Equipment
F1928-98R04E01 Safety Guide for Consumer Recreational Use of Fun-Karts
F1931-98R04 Test Method for Characterization of Gymnastic Landing Mats and Floor Exercise Surfaces
F1932-98R04 Test Method for Measuring Sleeping Bag Loft
F1933-98R04 Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent
F1934-98R04 Test Method for Weighing a Backpacking or Mountaineering Tent
F1935-01 Test Method for Measuring the Headroom of a Backpacking or Mountaineering Tent
F1936-98 Specification for Shock-Absorbing Properties of North American Football Field Playing Systems as Measured in the Field
F1937-04 Specification for Body Protectors Used in Horse Sports and Horseback Riding
F1938-98R04 Guide for Safer Use of Movable Soccer Goals
F1950-99 Specification for Physical Information to be Transferred With Used Amusement Rides and Devices
F1951-99 Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
F1952-00 Specification for Helmets Used for Downhill Mountain Bicycle Racing
F1953-99R03 Guide for Construction and Maintenance of Grass Tennis Courts
F1955-99R05 Test Method for Flammability of Sleeping Bags
F1957-99R04 Test Method for Composite Foam Hardness-Durometer Hardness
F1967-04 Consumer Safety Specification for Infant Bath Seats
F1972-99 Guide for Terminology Relating to Candles and Associated Accessory Items
F1975-02 Specification for Nonpowered Bicycle Trailers Designed for Human Passengers
F1976-99 Test Method for Cushioning Properties of Athletic Shoes Using an Impact Test
F1979-04 Specification for Paintballs Used in the Sport of Paintball
F1988-99R04E01 Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use
F1989-05 Specification for Cooking Fire Suppression Blankets
F2006-00 Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows
F2007-00 Practice for Classification, Design, Manufacture, and Operation of Concession Go-Karts and Facilities
F2011-02E01 Specification for Safety and Performance of Fun-Karts
F2012-03 Consumer Safety Performance Specification for Stationary Activity Centers
F2030-00 Specification for Paintball Cylinder Burst Disk Assemblies
F2031-00 Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
F2032-00 Specification for Helmets Used for BMX Cycling
F2040-02 Specification for Helmets Used for Recreational Snow Sports
F2041-00 Specification for Paintball Marker Warnings
F2043-00 Classification for Bicycle Usage
F2048-00 Practice for Reporting Slip Resistance Test Results
F2050-03 Consumer Safety Specification for Hand-Held Infant Carriers
F2056-00 Safety and Performance Specification for Soccer Goals
F2057-04 Safety Specification for Chests, Door Chests, and Dressers
F2058-00 Specification for Cautionary Labeling for Candles Burned in a Home
F2060-00R05 Guide for Maintaining Cool Season Turfgrasses on Athletic Fields
F2075-04 Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
F2085-03E01 Consumer Safety Specification for Portable Bed Rails
F2088-03 Consumer Safety Specification for Infant Swings
F2089-01 Guide for Language Interpretation Services
F2090-01A Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms
F2106-03 Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
F2107-01E01 Guide for Construction and Maintenance of Skinned Areas on Sports Fields
F2115-05 Specification for Motorized Treadmills
F2117-01 Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement
F2120-01 Practice for Testing Treestand Load Capacity
F2121-01 Practice for Treestand Labels
F2122-01 Practice for Treestand Safety Devices
F2123-01 Practice for Treestand Instructions
F2124-01 Practice for Testing Ladder Treestand, Tripod Treestand and Climbing Stick Load Capacity
F2125-01 Test Method for Treestand Static Stability
F2126-01 Test Method for Treestand Static Load Capacity
F2127-01 Test Method for Treestand Adherence
F2128-01 Test Method for Treestand Repetitive Loading Capability
F2137-04 Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices
F2153-01 Test Method for Measurement of Backpack Capacity
F2157-02 Specification for Synthetic Surfaced Running Tracks
F2167-05A Consumer Safety Specification for Infant Bouncer Seats
F2175-02 Specification for Portable Escape Ladder for Residential Use
F2179-02 Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers
F2184-02 Guide for Installation of Paintball Barrier Netting
F2194-04A Consumer Safety Specification for Bassinets and Cradles
F2201-02E01 Consumer Safety Specification for Utility Lighters
F2208-02E01 Specification for Pool Alarms
F2216-05 Specification for Selectorized Strength Equipment
F2219-04 Test Methods for Measuring High Speed Baseball Bat Performance Factor
F2220-02 Specification for Headforms
F2223-04 Guide for ASTM Standards on Playground Surfacing
F2225-03E01 Safety Specification for Consumer Trampoline Enclosures
F2232-03 Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear
F2234-03 Specification for Portable Gasoline and Kerosine Spill Resistant Fueling Systems for Consumer Use
F2236-03 Consumer Safety Specification for Soft Infant Carriers
F2240-05 Specification for Manufacturer Quality Assurance Program for Powered Parachute Aircraft
F2241-05A Specification for Continued Airworthiness System for Powered Parachute Aircraft
F2242-05 Specification for Production Acceptance Testing System for Powered Parachute Aircraft
F2243-05 Specification for Required Product Information to be Provided with Powered Parachute Aircraft
F2244-05 Specification for Design and Performance Requirements for Powered Parachute Aircraft
F2245-04 Specification for Design and Performance of a Light Sport Airplane
F2264-03 Consumer Safety Specification for Non-Powered Scooters
F2268-03 Specification for Bicycle Serial Numbers
F2269-03 Guide for Maintaining Warm Season Turfgrasses on Athletic Fields
F2270-04 Guide for Construction and Maintenance of Warning Track Areas on Sports Fields
F2271-03 Specification for Paintball Marker Barrel Blocking Devices
F2272-03 Specification for Paintball Markers (Limited Modes)
F2273-03 Test Methods for Bicycle Forks
F2274-03 Specification for Condition 3 Bicycle Forks
F2275-03 Practice for Treestand Manufacturer Quality Assurance Program
F2276-05 Specification for Fitness Equipment
F2277-03 Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
F2278-03 Test Method for Evaluating Paintball Barrier Netting
F2279-03 Practice for Quality Assurance in the Manufacture of Light Sport Airplanes
F2285-04 Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use
F2286-05 Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas
F2291-05 Practice for Design of Amusement Rides and Devices
F2295-03 Practice for Continued Operational Safety Monitoring of a Light Sport Airplane
F2316-03 Specification for Airframe Emergency Parachutes for Light Sport Aircraft
F2326-04 Test Method for Collection and Analysis of Visible Emissions from Candles as They Burn
F2333-04 Test Method for Traction Characteristics of the Athletic Shoe\NSports Surface Interface
F2336-05 Guide for Roller Hockey Playing Facilities
F2337-03 Test Method for Treestand Fall Arrest System
F2339-04 Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft
F2352-05 Specification for Design and Performance of Light Sport Gyroplane Aircraft
F2353-05 Specification for Manufacturer Quality Assurance Program for Lighter-Than-Air Light Sport Aircraft
F2354-05 Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft
F2355-05 Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft
F2356-05 Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft
F2367-04A Specification for Labeling for Upright Brooms for Consumer and Institutional Use
F2368-04 Specification for Labeling for Wet Mops for Consumer and Institutional Use
F2369-04 Safety Specification for Non-Integral Firearm Locking Devices
F2372-04 Consumer Safety Performance Specification for Shopping Carts
F2374-04 Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
F2387-04 Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs
F2388-04E01 Consumer Safety Specification for Baby Changing Tables for Domestic Use
F2395-05 Terminology for Unmanned Air Vehicle Systems
F2396-04 Guide for Construction of High Performance Sand-Based Rootzones for Sports Fields
F2397-04A Specification for Protective Headgear Used in Martial Arts
F2398-04E01 Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
F2411-04E01 Specification for Design and Performance of an Airborne Sense-and-Avoid System
F2412-05 Test Methods for Foot Protection
F2413-05 Specification for Performance Requirements for Foot Protection
F2415-05 Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft
F2416-04 Specification for Protective Headgear Used in Electric Personal Assistive Mobility Devices
F2417-04 Specification for Fire Safety for Candles
F2425-05 Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft
F2426-05 Guide on Wing Interface Documentation for Powered Parachute Aircraft
F2427-05 Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft
F2440-04 Specification for Indoor Wall/Feature Padding
F2441-05 Practice for Labeling of Backpacking and Mountaineering Tents and Bivouac Sacks
F2447-05 Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft
F2448-04 Practice for Manufacturer Quality Assurance System for Weight-Shift-Control Aircraft
F2449-05 Specification for Manufacturer Quality Assurance Program for Light Sport Gyroplane Aircraft
F2456-04 Specification for Youth-Resistant Firearms Containers (YRFCs)
F2457-05 Specification for Required Product Information to be Provided withWeight-Shift-Control Aircraft
F2483-05 Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft
Volume 15.08, November 2005
Sensory Evaluation; Livestock, Meat, and Poultry Evaluation Systems, Vacuum Cleaners; Security Systems and Equipment; Detention and Correctional Facilities; Food Service Equipment
A0627-03 Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
A0629 Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications
A0750 Specification for Steel Air Ventilating Grille Units for Detention Areas
E0253-05 Terminology Relating to Sensory Evaluation of Materials and Products
E0460-04 Practice for Determining Effect of Packaging on Food and Beverage Products During Storage
E0544-99R04 Practices for Referencing Suprathreshold Odor Intensity
E0619-84R03 Practice for Evaluating Foreign Odors in Paper Packaging
E0679-04 Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits
E0769-85R04 Test Methods for Odor of Methanol, Ethanol, -Propanol, and Isopropanol
E1075-85R04 Test Methods for Odor of Ethylene Glycol, Diethylene Glycol, Triethylene Glycol, Propylene Glycol, and Dipropylene Glycol and Taste of Propylene Glycol
E1083-00E01 Test Method for Sensory Evaluation of Red Pepper Heat
E1207-02 Practice for The Sensory Evaluation of Axillary Deodorancy
E1346-90R00 Practice for Bulk Sampling, Handling, and Preparing Edible Vegetable Oils for Sensory Evaluation
E1395-90R04 Test Method for Sensory Evaluation of Low Heat Chilies
E1396-90R04 Test Method for Sensory Evaluation of Oleoresin Capsicum
E1432-04 Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of Intermediate Size
E1490-03 Practice for Descriptive Skinfeel Analysis of Creams and Lotions
E1593-94R99 Practice for Assessing the Efficacy of Air Freshener Products in Reducing Sensorily Perceived Indoor Air Malodor Intensity
E1627-94R04 Practice for Sensory Evaluation of Edible Oils and Fats
E1697-05 Test Method for Unipolar Magnitude Estimation of Sensory Attributes
E1810-96R04 Practice for Evaluating Effects of Contaminants on Odor and Taste of Exposed Fish
E1870-04 Test Method for Odor and Taste Transfer from Polymeric Packaging Film
E1871-97R04 Practice for Serving Protocol for Sensory Evaluation of Foods and Beverages
E1879-00R04E01 Guide for Sensory Evaluation of Beverages Containing Alcohol
E1885-04 Test Method for Sensory Analysis\MTriangle Test
E1909-97R03 Guide for Time-Intensity Evaluation of Sensory Attributes
E1958-98 Guide for Sensory Claim Substantiation
E2049-99 Guide for Quantitative Evaluation of Fragrance/Odors for Shampoos and Hair Conditioners
E2082-00 Guide for Descriptive Analysis of Shampoo Performance
E2164-01 Test Method for Directional Difference Test
E2262-03 Practice for Estimating Thurstonian Discriminal Distances
E2263-04 Test Method for Paired Preference Test
E2299-03 Guide for Sensory Evaluation of Products by Children
E2346-04 Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers
E2413-04 Guide for Hospital Preparedness and Response
E2414-05 Test Method for Quantitative Sporicidal Three-Step Method (TSM) to Determine Sporicidal Efficacy of Liquids, Liquid Sprays, and Vapor or Gases on Contaminated Carrier Surfaces
F0395-03 Terminology Relating to Vacuum Cleaners
F0420-04 Test Method for Access Depth Under Furniture of Vacuum Cleaners
F0430-05 Test Methods for Paper Used for Vacuum Cleaner Filter Bags
F0431-04 Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners
F0450-01 Test Methods for Vacuum Cleaner Hose\MDurability and Reliability (Plastic Wire Reinforced)
F0471-76R02 Terminology Relating to Combination Locks
F0476-84R02 Test Methods for Security of Swinging Door Assemblies
F0486-01 Practice for Preparation of Use and Care Booklets for Vacuum Cleaners
F0494-05 Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
F0555-01 Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
F0558-03 Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
F0571-87R01 Practice for Installation of Exit Devices in Security Areas
F0595-01 Test Methods for Vacuum Cleaner Hose\MDurability and Reliability (All-Plastic Hose)
F0608-03 Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners
F0655-03 Specification for Test Carpets and Pads for Vacuum Cleaner Testing
F0760-93R00 Specification for Food Service Equipment Manuals
F0792-01E02 Practice for Evaluating the Imaging Performance of Security X-Ray Systems
F0820-03 Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
F0832-90R01 Classification for Security Seals
F0857-02 Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Stationary Rack Type
F0858-02 Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Single Tank, Conveyor Rack Type
F0859-04 Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type
F0860-02 Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
F0861-94R03 Specification for Commercial Dishwashing Racks
F0883-04 Performance Specification for Padlocks
F0884-01 Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
F0888-04 Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner
F0917-91R03 Specification for Commercial Food Waste Disposers
F0918-02 Specification for Noncarbonated Mechanically Refrigerated Beverage Dispenser (Visible Product)
F0919-05 Specification for Slicing Machines, Food, Electric
F0922-01 Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
F0946-85R04 Guide for Establishing Security Seal Control and Accountability Procedures
F0947 Test Method for Determining Low-Level X-Radiation Sensitivity of Photographic Films
F0952-03 Specification for Mixing Machines, Food, Electric
F0953-94R03 Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing
F0967-03 Practice for Security Engineering Symbols
F1021-95R01 Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines
F1022-95R00 Specification for Chemical Sanitizing Commercial Dishwashing Machines, Recirculated Wash, Fresh Water Rinse Type
F1023-99R04 Specification for Dispensers, Powdered Iced Tea
F1024 Specification for Dispensers, Rehydrated Mashed Potato
F1029 Guide for Selection of Physical Security Measures for a Facility
F1038-02E01 Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator
F1039 Test Method for Measurement of Low Level X-Radiation Used in X-Ray Security Screening Systems
F1047-04 Specification for Frying and Braising Pans, Tilting Type
F1090-87R97E01 Classification for Bank and Mercantile Vault Construction
F1114-94R00 Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Station Rack Type Water-Driven Rotary Spray
F1126-03 Specification for Food Cutters, (Electric)
F1150-88R00 Specification for Commercial Food Waste Pulper and Waterpress Assembly
F1157-04 Practice for Classifying the Relative Performance of the Physical Properties of Security Seals
F1158-94R01 Guide for Inspection and Evaluation of Tampering of Security Seals
F1202-97 Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
F1203-97 Specification for Washing Machines-Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
F1217-03 Specification for Cooker, Steam
F1233-98R04 Test Method for Security Glazing Materials And Systems
F1237-04 Specification for Commercial Dishwashing Machines, Multiple-Tank, Continuous Oval-Conveyor Type, Heat Sanitizing
F1247-89R05 Specification for Intrusion Resistant Generic Vault Structures
F1275-03E01 Test Method for Performance of Griddles
F1284-04 Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
F1326-02 Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
F1334-02 Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
F1360-93R99 Specification for Ovens, Microwave, Electric
F1361-99E01 Test Method for Performance of Open Deep Fat Fryers
F1371-04 Specification for Vegetable Peeling Machines, Electric
F1409-00R05 Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets
F1410-98R03 Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners
F1411-01 Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use
F1448-93AR99 Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents
F1450-05 Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities
F1465-03 Guide for Selection of Security Control Systems
F1468-04A Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening
F1484-05 Test Methods for Performance of Steam Cookers
F1495-99 Specification for Combination Oven Electric or Gas Fired
F1496-99 Test Method for Performance of Convection Ovens
F1521-03 Test Methods for Performance of Range Tops
F1534-05 Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
F1550-05 Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale
Oxygen Consumption Calorimeter
F1568-03 Specification for Food Processors, Electric
F1577-05 Test Methods for Detention Locks for Swinging Doors
F1592-05 Test Methods for Detention Hollow Metal Vision Systems
F1601-01 Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems
F1602-95R01 Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Connected, Gas Fired and Electric Fired
F1603-95R01 Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Connected, Gas Fired and Electric Fired
F1604-02 Specification for Freezers, Ice Cream, Soft Serve, Shake
F1605-95R01E01 Test Method for Performance of Double-Sided Griddles
F1639-95R01 Test Method for Performance of Combination Ovens
F1641 Test Method for Measuring Penetration Resistance of Security Glazing Using a Pendulum Impactor
F1642-04 Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
F1643-05 Test Methods for Detention Sliding Door Locking Device Assembly
F1692-01 Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems
F1695-03E01 Test Method for Performance of Underfired Broilers
F1696-96R03 Test Method for Energy Performance of Single-Rack Hot Water Sanitizing, Door-Type Commercial Dishwashing Machines
F1699-96R01 Classification for Passive Fiber Optic Seals
F1704-05 Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems
F1758-05 Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
F1784-97R03E01 Test Method for Performance of a Pasta Cooker
F1785-97R03E01 Test Method for Performance of Steam Kettles
F1786-97R04E01 Test Method for Performance of Braising Pans
F1787-98R03 Test Method for Performance of Rotisserie Ovens
F1817-97R03 Test Method for Performance of Conveyor Ovens
F1827-97R00 Terminology Relating to Food Service Equipment
F1870-05 Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
F1899-98R03 Specification for Food Waste Pulper Without Waterpress Assembly
F1915-05 Test Methods for Glazing for Detention Facilities
F1916-98 Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for Detention Applications
F1919-03 Specification for Griddles, Single and Double Sided, Self-heating, Counter or Stand Mounted Gas and Electric Fired
F1920-98R03 Test Method for Energy Performance of Rack Conveyor, Hot Water Sanitizing, Commercial Dishwashing Machines
F1963-99A Specification for Deep-Fat Fryers, Gas or Electric, Open
F1964-99 Test Method for Performance of Pressure and Kettle Fryers
F1965-99 Test Method for Performance of Deck Ovens
F1966-03 Specification for Dough Divider and Rounding Machines
F1977-04 Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
F1991-99 Test Method for Performance of Chinese (Wok) Ranges
F2022-00 Test Method for Performance of Booster Heaters
F2069-00 Practice for Evaluation of Explosives Vapor Detectors
F2092-01 Specification for Convection Oven Gas or Electric
F2093-01E01 Test Method for Performance of Rack Ovens
F2105-04 Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
F2140-01 Test Method for Performance of Hot Food Holding Cabinets
F2141-01 Test Method for Performance of Hot Deli Cases
F2142-01 Test Method for Performance of Drawer Warmers
F2143-04 Test Method for Performance of Refrigerated Buffet and Preparation Tables
F2144-01E01 Test Method for Performance of Large Open Vat Fryers
F2155-01 Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals
F2202-02 Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets
F2237-03 Test Method for Performance of Upright Overfired Broilers
F2238-03 Test Method for Performance of Rapid Cook Ovens
F2239-03E01 Test Method for Performance of Conveyor Broilers
F2247-03 Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
F2248-03 Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass
F2322-03 Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities
F2324-03 Test Method for Prerinse Spray Valves
F2340-04 Specification for Developing and Validating Prediction Equation(s) or Model(s) Used in Connection with Livestock, Meat, and Poultry Evaluation Device(s) or System(s) to Determine Value
F2341-03 Practice for User Requirements for Livestock, Meat, and Poultry Evaluation Devices or Systems
F2342-03 Specification for Design and Construction of Composition or Quality Constituent Measuring Devices or Systems
F2343-04 Test Method for Livestock, Meat, and Poultry Evaluation Devices
F2348-04 Performance Specification for Privacy Padlocks
F2379-04 Test Method for Energy Performance of Powered Open Warewashing Sinks
F2380-04 Test Method for Performance of Conveyor Toasters
F2401-04 Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
F2432-04 Specification for Ice Making Machines, Icemaker-Dispensers, and Ice Dispensing Equipment
F2463-05 Terminology for Livestock, Meat, and Poultry Evaluation Systems
F2472-05 Test Method for Performance of Staff-Serve Hot Deli Cases
F2473-05 Test Method for Performance of Water-Bath Rethermalizers
F2474-05 Test Method for Heat Gain to Space Performance of Commercial Kitchen Ventilation/Appliance Systems
Volume 15.09, June 2005
Paper; Packaging; Flexible Barrier Materials; Business Imaging Products
D0528-97R02 Test Method for Machine Direction of Paper and Paperboard
D0548-97R02 Test Method for Water-Soluble Acidity or Alkalinity of Paper
D0585-97R02 Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
D0586-97R02 Test Method for Ash in Pulp, Paper, and Paper Products
D0589-97R02 Test Method for Opacity of Paper (15|SD Diffuse Illuminant A, 89\t\% Reflectance Backing and Paper Backing)
D0590-93R02 Test Method for Petroleum Wax in Paper
D0642-00 Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
D0643-97R02 Test Method for Folding Endurance of Paper by the Schopper Tester
D0644-99R02 Test Method for Moisture Content of Paper and Paperboard by Oven Drying
D0645_D0645M-97R02 Test Method for Thickness of Paper and Paperboard
D0646-96R01 Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
D0685-93R02 Practice for Conditioning Paper and Paper Products for Testing
D0686-93R02 Test Methods of Qualitative Examination of Mineral Filler and Mineral Coating of Paper
D0689-03 Test Method for Internal Tearing Resistance of Paper
D0722-93R02 Test Method for Grease Resistance of Paper
D0724-99R03 Test Method for Surface Wettability of Paper (Angle-of-Contact Method)
D0726-94R03 Test Method for Resistance of Nonporous Paper to Passage of Air
D0727-96R01 Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method
D0774_D0774M-97R02 Test Method for Bursting Strength of Paper
D0776-92R01 Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board
D0777-97R02 Test Methods for Flammability of Treated Paper and Paperboard
D0778-97R02 Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot-Extraction and Cold-Extraction Procedures)
D0779-03 Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by the Dry Indicator Method
D0780-95R03 Test Method for Printing Ink Permeation of Paper (Castor Oil Test)
D0824-94R02 Test Method for Rate of Absorption of Water by Bibulous Papers
D0828-97R02 Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
D0829-97R02 Test Methods for Wet Tensile Breaking Strength of Paper and Paper Products
D0880-92R02 Test Method for Impact Testing for Shipping Containers and Systems
D0918-99R03 Test Method for Blocking Resistance of Paper and Paperboard
D0919-97R02 Test Method for Copper Number of Paper and Paperboard
D0951-99R04 Test Method for Water Resistance of Shipping Containers by Spray Method
D0984-97R02 Test Methods for Reducible Sulfur in Paper
D0985-97R02 Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm)
D0996-04 Terminology of Packaging and Distribution Environments
D0999-01 Test Methods for Vibration Testing of Shipping Containers
D1030-95R99 Test Method for Fiber Analysis of Paper and Paperboard
D1185-98AR03 Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
D1223-93R98 Test Method for Specular Gloss of Paper and Paperboard at 75|SD
D1224-92R01 Test Methods for Zinc and Cadmium in Paper
D1434-82R03 Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
D1596-97R03 Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
D1749-93R02 Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products
D1968-02A Terminology Relating to Paper and Paper Products
D1974-98R03 Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
D1975-95R01E01 Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
D2019-97R02 Test Method for Dirt in Paper and Paperboard
D2020-92R03 Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard
D2043-94R02 Test Method for Silver Tarnishing by Paper
D2063-91R02 Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures
D2175-97R02 Test Method for Book Bulk and Book Bulking Number of Paper
D2176-97AR02 Test Method for Folding Endurance of Paper by the M.I.T. Tester
D2177-99R03 Test Method for Ink Absorption of Blotting Paper
D2221-01 Test Method for Creep Properties of Package Cushioning Materials
D2482-97R02 Test Method for Surface Strength of Paper (Wax Pick Method)
D2658-04 Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
D2860_D2860M-04 Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90|SD Angle and Constant Stress
D3060-94R99E01 Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
D3061-97R03 Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans
D3064-97R03 Terminology Relating To Aerosol Products
D3065-01 Test Methods for Flammability of Aerosol Products
D3069-94R99E01 Test Method for Delivery Rate of Aerosol Products
D3070-00 Test Method of Rapid Pressure Determination of Pressurized Products
D3076-00 Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
D3078-02 Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
D3079-94R03 Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products
D3089-97R03 Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
D3090-72R03 Practice for Storage Testing of Aerosol Products
D3091-72R03 Practice for Safe Filling of Low-Pressure Pressurized Products
D3094-00 Test Method for Seepage Rate of Aerosol Products
D3097 Test Method for Aerosol Products for Delivered Mass
D3103-99 Test Method for Thermal Insulation Quality of Packages
D3198-97R02 Test Method for Application and Removal Torque of Threaded or Lug-Style Closures
D3208-00 Specification for Manifold Papers for Permanent Records
D3285-93R99 Test Method for Water Absorptiveness of Nonbibulous Paper and Paperboard (Cobb Test)
D3290-00 Specification for Bond and Ledger Papers for Permanent Records
D3301-00 Specification for File Folders for Storage of Permanent Records
D3330_D3330M-04 Test Method for Peel Adhesion of Pressure-Sensitive Tape
D3332-99R04 Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
D3458-00 Specification for Copies from Office Copying Machines for Permanent Records
D3460-98 Specification for White Watermarked and Unwatermarked Bond, Mimeo, Spirit Duplicator, Reprographic, and Laser Printer Cut-Sized Office Papers
D3469-97R02 Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures
D3470-97R02 Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures
D3472-97R02 Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures
D3474-90R02 Practice for The Calibration and Use of Torque Meters Used in Packaging Applications
D3475-03A Classification of Child-Resistant Packages
D3481-97R02 Test Method for Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
D3580-95R04 Test Methods for Vibration (Vertical Linear Motion) Test of Products
D3611-89R03 Practice for Accelerated Aging of Pressure-Sensitive Tapes
D3652_D3652M-01 Test Method for Thickness of Pressure-Sensitive Tapes
D3654_D3654M-02 Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
D3715_D3715M-98R04 Practice for Quality Assurance of Pressure-Sensitive Tapes
D3759_D3759M-04 Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
D3810-97R02 Test Method for Minimum Application Torque of Type IA Child-Resistant Closures
D3811_D3811M-96R01 Test Method for Unwind Force of Pressure-Sensitive Tapes
D3813_D3813M-98R03 Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
D3815_D3815M-99 Practice for Accelerated Aging of Pressure-Sensitive Tapes by Carbon-Arc Exposure Apparatus
D3816_D3816M-96R03 Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
D3833_D3833M-96R01 Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
D3889_D3889M-96R01 Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
D3890-01 Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser
D3950-04 Specification for Strapping, Nonmetallic (and Joining Methods)
D3951-98R04 Practice for Commercial Packaging
D3953-02 Specification for Strapping, Flat Steel and Seals
D3968-97R02 Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures
D3985-02E01 Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
D4003-98R03 Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
D4041-97R03 Practice for Determining Spray Patterns of Manually Operated Pump Dispensers
D4168-95R02 Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
D4169-04A Practice for Performance Testing of Shipping Containers and Systems
D4250-92R03 Test Method for Water-Holding Capacity of Bibulous Fibrous Products
D4267-95R01 Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers
D4279-95R03 Test Methods for Water Vapor Transmission of Shipping Containers\MConstant and Cycle Methods
D4332-01E01 Practice for Conditioning Containers, Packages, or Packaging Components for Testing
D4333-99 Test Method for the Compatibility Resistance of Mechanical Pump Dispenser Components
D4334-99 Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
D4335-99 Test Method for the Determination of the Component Retention of a Mechanical Pump Dispenser
D4336-01 Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser
D4432 Guide for Purchasing Papers Used in Continuous Computer Forms
D4504-94R00E01 Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
D4577-00R03E01 Test Method for Compression Resistance of a Container Under Constant Load
D4649-03 Guide for Selection and Use of Stretch Wrap Films
D4675-03 Guide for Selection and Use of Flat Strapping Materials
D4714-96R01 Test Method for Determination of Effect of Moist Heat (50 \% Relative Humidity and 90|SDC) on Properties of Paper and Board
D4727_D4727M-03 Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
D4728-01 Test Method for Random Vibration Testing of Shipping Containers
D4774-94R00 Specification for User Applied Drug Labels in Anesthesiology
D4775-04 Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)
D4825-97R02 Test Method for Measurement of Curl in Cut-Sized Office Paper
D4826-88R02 Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard
D4917-97R02 Test Method for Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of the Horizontal Plane Method
D4918-97R02 Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method
D4919-03 Guide for Testing of Hazardous Materials Packagings
D4949-94R02 Test Method for Determination of D-C Resistivity of Writing Paper (Keithley Method)
D4987-99R03 Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper
D4988-96R01 Test Method for Determination of Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper)
D4991-94R99 Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
D5022-95R01 Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use
D5039-97R02 Test Methods for Identification of Wire Side of Paper
D5077-90R03 Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
D5094-04 Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
D5105-94R99 Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
D5112-98R03 Test Method for Vibration (Horizontal Linear Motion) Test of Products
D5118_D5118M-04E01 Practice for Fabrication of Fiberboard Shipping Boxes
D5168-03 Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
D5264-98R04 Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
D5265-03 Test Method for Bridge Impact Testing
D5276-98R04 Test Method for Drop Test of Loaded Containers by Free Fall
D5277-92R02 Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
D5330_D5330M-04 Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
D5331-03 Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
D5342-97R02 Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
D5375_D5375M-98R04 Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
D5414-95R01 Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
D5415-95R01 Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
D5416-95R01 Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
D5445-03A Practice for Pictorial Markings for Handling of Goods
D5455-93R03 Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test)
D5458-95R01 Test Method for Peel Cling of Stretch Wrap Film
D5459-95R01 Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
D5486_D5486M-04 Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
D5487-98R02 Test Method for Simulated Drop of Loaded Containers by Shock Machines
D5488 Terminology of Environmental Labeling of Packaging Materials and Packages
D5570-94R99 Test Method for Water Resistance of Tape and Adhesives Used as a Box Closure
D5571-94R01E01 Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
D5625-97R02 Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
D5626-94R01 Test Methods for U.S. Postal Service Optical Measurements for Small Areas
D5634-01 Guide for Selection of Permanent and Durable Offset and Book Papers
D5639_D5639M-95R00E01 Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
D5650-97R02 Test Method for Resistance to Bending of Paper of Low Bending Stiffness (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration)
D5663-97R03 Guide for Validating Recycled Content in Packaging Paper and Paperboard
D5725-99R03 Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester
D5728-00 Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
D5748-95R01 Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
D5749-01 Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
D5750_D5750M-95R01 Guide for Width and Length of Pressure-Sensitive Tape
D5802-95R01 Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)
D5803-97R02 Test Method for Tensile Strength at Zero-Span (|P`Wet Zero-Span Tensile|P')
D5804-97R02 Test Methods for Zero-Span Tensile Strength (|P`Dry Zero-Span Tensile|P')
D5833 Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans
D5834 Guide for Source Reduction Reuse, Recycling, and Disposal of Solid and Corrugated Fiberboard (Cardboard)
D6039_D6039M-02 Specification for Crates, Wood, Open and Covered
D6043-01 Guide for Selection of Permanent and Durable Artist's Paper
D6055-96R02 Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
D6101-97 Test Method for Equivalent Black Area (EBA) of Dirt in Pulp, Paper and Paperboard by Image Analysis
D6123_D6123M-97R03 Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
D6125-97R02 Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)
D6148-97R02 Practice for the Separation and Examination of Stickies
D6149 Specification for Newsprint Including Newsprint Manufactured from Recycled Fiber
D6179-97R03 Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
D6198-01E01 Guide for Transport Packaging Design
D6199-97E01 Practice for Quality of Wood Members of Containers and Pallets
D6251_D6251M-01 Specification for Wood-Cleated Panelboard Shipping Boxes
D6252_D6252M-98R04 Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90|SD Angle
D6253-98 Practice for Marking of Pallets
D6254_D6254M-99 Specification for Wirebound Pallet-Type Wood Boxes
D6255_D6255M-99 Specification for Steel or Aluminum Slotted Angle Crates
D6256_D6256M-99 Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases
D6295_D6295M-98R04 Test Method for Dispensability of Light\NDuty Pressure\NSensitive Film Tape
D6344-04 Test Method for Concentrated Impacts to Transport Packages
D6398-01E01 Practice to Enhance Identification of Drug Names on Labels
D6534-00 Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
D6535-00 Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser
D6536-00 Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
D6537-00 Practice For Instrumented Package Shock Testing For Determination of Package Performance
D6548-00 Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure)
D6551-00 Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
D6573_D6573M-01 Specification for General Purpose Wirebound Shipping Boxes
D6590_D6590M-00 Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
D6633-01 Test Method for Basic Functional Stability of a Mechanical Pump Dispenser
D6653-01 Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
D6654-01 Test Method for Basic Storage Stability of a Mechanical Pump Dispenser
D6655-01 Terminology Relating to Mechanical Pump Dispensers
D6787-02 Specification for Repositionable Note Pad
D6788-02 Specification for Repositionable Pressure-Sensitive Flags
D6789-02E01 Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus
D6804-02 Guide for Hand Hole Design in Corrugated Boxes
D6819-02E02 Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus
D6833-02E01 Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus
D6834-02 Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser
D6881-03 Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
D7030-04 Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
D7077-04 Test Method for Evaluation of Drop Size by weight of Solutions and Suspensions
E0171-94R02 Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
E0398-03 Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
F0017-02 Terminology Relating to Flexible Barrier Materials
F0034-02 Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
F0088-00 Test Method for Seal Strength of Flexible Barrier Materials
F0092-93R03 Practice for Determination of Character Yield of Inked Fabric Typewriter and Printer Ribbons
F0099-76R01 Practice for Preparation of Flexible Barrier Material Specifications
F0119-82R02 Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
F0129-97R02 Practice for Amount of Ink Deposit on Carbon Paper and Inked Ribbons, Other Than Fabric Type
F0149-92BR03 Terminology Relating to Optical Character Recognition
F0151 Test Method for Residual Solvents in Flexible Barrier Materials
F0153-95R02 Test Method for Determining the Yield of Wide Inked Computer Ribbons
F0221-98R03 Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom
F0335-03 Terminology Relating to Electrostatic Imaging
F0360-82R01 Practice for Image Evaluation of Electrostatic Business Copies
F0362-91R00E01 Test Method for Determining the Erasability of Inked Ribbons
F0372-99R03 Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique
F0392-93R04 Test Method for Flex Durability of Flexible Barrier Materials
F0396-00R04 Practice for Comparing One-Time Noncorrectable Typewriter Ribbons
F0413 Practice for Preparation of an Offset Duplicator for Use in Functional Testing of Lithographic Copy Products
F0415-87R00E01 Test Method for Curl in Carbon Paper
F0425 Terminology Relating to Lithographic Copy Products
F0470-89R03 Practice for Caking Temperature of Dry Electrostatic Toner
F0497-00R04 Practice for Use of the Electric and Electronic Typewriter as a Test Instrument
F0505-87R01 Practice for the Comparative Evaluation of the Imaging Properties of Liquid Electrostatic Toners
F0506 Practice for Assessing the Quality of Direct-Image Paper Offset Masters
F0509-86R04 Practice for Testing One-Time Carbonizing Tissue for Pinholes
F0549-85R04 Terminology Relating to Carbonless Copy Products
F0550 Test Method for Lithographic Properties of Imaging Materials
F0556-88R01 Test Method for Curl of Carbonless Copy Papers
F0577-03E01 Test Method for Particle Size Measurement of Dry Toners
F0596-82R03 Practice for Comparative Evaluation of the Imaging Properties of Dry Electrostatic Toners
F0597-83R03 Practice for Evaluation of One-Time Carbon Paper in Carbon-Interleaved Business Forms by Use of an Electric Typewriter
F0598-00R04 Practice for Determining the Resistance of Carbonless Papers to Capsular Damage
F0605-88R01 Practice for Determining the Compatibility of One-Time Carbon Paper with Carbonless Copy Papers When Interleaved into the Same Manifold Set
F0627-99R03 Practice for Testing Flake of Single-Strike Film Typewriter Ribbons
F0653 Test Method for Evaluation of Electrostatic Masters
F0685-96R01 Practice for Determining Toner Usage, Efficiency, and Dusting Nonheat Fixing Copiers Using Single-Component Toner Systems
F0686-94R01 Practice for Evaluation of Image Quality Produced by a Carbonless Copy Paper with an Electric or Electronic Typewriter
F0706-96R01 Practice for Determination of Fusion Temperature of Dry Electrostatic Heat-Fixing Toners
F0751 Test Method for Measuring Particle Size of Wide-Size Range Dry Toners
F0757-01 Test Method for Determining Energy Consumption of Copier and Copier-Duplicating Equipment
F0766-82R00E01 Test Method for Melting Point of Waxes
F0767-98R02 Test Method for Image Stability of Chemical Carbonless Paper to Light
F0807-83R03 Practice for Determining Resolution Capability of Office Copiers
F0843-98R03 Test Method for Assessing the Color Strength and Dispersibility of Alkali Blue Pigment in Hot Melt Carbon Copy Paper Ink
F0854-83R03 Test Method for Cleanliness of Carbon Paper
F0874-98R03 Test Method for Temperature Measurement and Profiling for Microwave Susceptors
F0875-94R03 Test Method for Evaluation of Large Area Density and Background on Office Copiers
F0904-98R03 Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
F0909-94AR01 Terminology Relating to Printers
F0935-00R04 Test Method for Comparing Cover-Up Correction Media
F0974-96R01 Practice for Determination of the Color Response of an Electrostatic Copying System, Black and White Output
F0995-97R01 Practice for Estimating Toner Usage in Copiers Utilizing Dry Two-Component Developer
F1033-00R04 Test Method for Comparing Lift-Off Correction Media
F1042-87R04 Practice for Estimating Toner and Dispersant Usage in Copiers Utilizing Liquid Developers
F1050-87R00E01 Test Method for Determining Winding Torque and Tension of Typewriter Ribbons
F1051-00R04 Test Method for Comparing Multistrike Film Ribbons
F1115-95R01 Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
F1125-87R00 Terminology of Image Quality in Impact Printing Systems
F1140-00 Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages for Medical Applications
F1151-88R03 Test Method for Determining Variations in Hardness of Film Ribbon Pancakes
F1174-01 Practice for Using a Personal Computer Printer as a Test Instrument
F1175-88R01 Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison
F1206-94R00 Test Method for Evaluating Color Image Output from Color Printers and Copiers
F1225-99R03 Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges
F1232-98R03 Practice for Generating a Test Pattern for Single-Pass Film Ribbons
F1249-01 Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
F1278-96R03 Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
F1294-97AR03 Terminology Relating to Automatic Identification Hard Copy Printing Systems
F1306-90R02 Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
F1307-02 Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
F1308-98R03 Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
F1317-98R02 Test Method for Calibration of Microwave Ovens
F1318-90R03 Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations
F1319-94R00 Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method)
F1320-01 Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument
F1327-98 Terminology Relating to Barrier Materials for Medical Packaging
F1349-98R03 Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
F1351-96R02 Practice for Determination of the Effect of Hard Creasing Paper on Images Produced by Business Imaging Systems
F1405-98R02 Test Method for Determining the Dynamic Thermal Response of Direct Thermal Imaging Products\MAtlantek Method
F1416-96R03 Guide for Selection of Time-Temperature Indicators
F1423-97R02 Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers
F1424-92R01 Test Method for Estimating Toner Usage in Full-Color Copiers Utilizing Dry Mono-or-Dual-Component Toners
F1425-92R01 Test Method for Determining the Tribocharge of Two-Component Developer Materials
F1434-97R02 Practice for Estimating the Performance of a Fuser Oil in an Electrostatic Copier or Printer
F1442-92R03 Practice for Using a Copier or Printer as a Test Instrument for Evaluating Paper Performance
F1443-93R03 Practice for Using 0.008-in. (0.203-mm) Aperture Reflectometers as Test Instruments for Measuring Visual Image Quality of Business Copy Images
F1444-00R04 Test Method for Determining Dynamic Thermal Response of Direct Thermal Paper-Label Printer Method
F1445-00R04 Test Method for Determining Static Thermal Sensitivity of Direct Thermal Media
F1454-99R03 Practice for Comparing Correctable Film Ribbons
F1457-94BR01 Terminology Relating to Laser Printers
F1478-95R00 Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method)
F1479-98R03 Terminology Relating to Microwave Food Packaging
F1486-96R02 Practice for Determination of Abrasion and Smudge Resistance of Images Produced from Office Products (GA-CAT Method)
F1500-98R03 Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
F1509-94R04 Test Methods for Determining Acceptability of Ribbon Welds in Fabric Cartridges
F1519-98R03 Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
F1520-94R03 Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges
F1531 Test Method for Comparing Printer or Copier Cartridges
F1571-95R02 Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Sutherland Method)
F1585-00 Guide for Integrity Testing of Porous Barrier Medical Packages
F1608-00R04 Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
F1623-96R02 Terminology Relating to Thermal Imaging Products
F1706-96R02 Practice for Determining Energy Consumption of Nonimpact Personal Computer Printers
F1707-96R02 Practice for Determining Energy Consumption of Facsimile Machines
F1721-04 Practices for Determining Stability of Direct Thermal Imaging Products
F1769 Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector
F1770 Test Method for Evaluation of Solubility, Diffusivity, and Permeability of Flexible Barrier Materials to Water Vapor
F1782-97R02 Practice for Amount of Ink Deposit on Fabric Type Ribbons
F1851-98R03 Practice for Bar Code Verification
F1856-04 Practice for Determining Toner Usage for Printer Cartridges
F1857-01 Terminology Relating to Ink Jet Printers and Images Made Therefrom
F1884-04 Test Methods for Determining Residual Solvents in Packaging Materials
F1886-98R04 Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection
F1921-98R04 Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
F1927-98R04 Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
F1929-98R04 Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
F1942-98R03 Practice for Creating Test Targets for Determining the Ink Yield of the Imaging Supplies Used in Ink Jet Printers
F1943-98R03 Test Method for Determining the Dynamic Thermal Response of Thermal Mass Transfer Ribbon Products\MAtlantek Method
F1944-98R03 Practice for Determining the Quality of the Text, Line- and Solid-Fill Output Produced by Ink Jet Printers
F1945-05 Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting
F1946-04 Practice for Accelerated Testing of the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting and Window\NFiltered Daylight
F1980-02 Guide for Accelerated Aging of Sterile Medical Device Packages
F2013-01 Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector
F2029-00 Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength
F2035-00 Practice for Measuring the Dark Stability of Ink Jet Prints
F2036-04 Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers
F2037-00 Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments
F2054-00 Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
F2095-01 Test Methods for Pressure Decay Leak Test for Nonporous Flexible Packages With and Without Restraining Plates
F2096-04 Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)
F2097-01 Guide for Design and Evaluation of Primary Packaging for Medical Products
F2203-02E01 Test Method for Linear Measurement Using Precision Steel Rule
F2217-02 Practice for Coating/Adhesive Weight Determination
F2226-03 Practice for Determining the Adhesion of Prints and Laminating Films
F2227-02 Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Medical Packaging Trays by CO2 Tracer Gas Method
F2228-02 Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method
F2250-03 Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials
F2251-03E01 Test Method for Thickness Measurement of Flexible Packaging Material
F2252-03 Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
F2292-03 Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods\MDrip, Spray, Submersion and Rub
F2293-03 Practice for Determining the Stain Resistance of Images Produced by Ink Jet Printers
F2294-03 Practice for Determining the Writeability of Print Media
F2296-04 Practice for Determining the Adhesion of Lamination Films to Prints Utilizing Mechanical Stress: Four Different Test Methods\MScore/Tape, Cross Hatch, X-Cut, and Crease-Folding
F2338-04 Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
F2366-05 Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus
F2406-04 Practice for Determining Yield of Solid Ink Sticks
F2452-04 Practice for Determining the Adhesion of Print Media Utilizing Mechanical Stress: Two Different Test Methods\MScore/Tape and Cross Hatch
ISO standard included inside ASTM
ANS/ISO7767-97 Oxygen Monitors for Monitoring Patient Breathing Mixtures-Safety Requirements Approved as an American National Standard with Deviations by ASTM International
ANS/ISO4135-01 Anaesthetic and Respiratory Equipment— Vocabulary Approved as an American National Standard with Deviations by ASTM International
ANS/ISO10079.1-99 Medical Suction Equipment—Part 1: Electrically Powered Suction Equipment—Safety Requirements Approved as an American National Standard with Deviations by ASTM International
ANS/ISO10079.2-99 Medical Suction Equipment—Part 2: Manually Powered Suction Equipment Approved as an American National Standard with Deviations by ASTM International
ANS/ISO10079.3-99 Medical Suction Equipment—Part 3: Suction Equipment Powered from a Vacuum or Pressure Source Approved as an American National Standard with Deviations by ASTM International
ANS/ISO1522-98(E) Paints and Varnishes—Pendulum Damping Test Approved as an American National Standard by ASTM International
ANS/ISO5359-00E Low-Pressure Hose Assemblies for Use with Medical Gases Approved as an American National Standard with Deviations by ASTM International
ANS/ISO5361-99 Anaesthetic and Respiratory Equipment—Tracheal Tubes and Connectors Approved as an American National Standard by ASTM International
ANS/ISO5366.1-00E Anaesthetic and Respiratory Equipment—TracheostomyTubes—Part 1: Tubes and Connectors for Use in Adults Approved as an American National Standard by ASTM International
ANS/ISO5362-00 Anaesthetic Reservoir Bags Approved as an American National Standard by ASTM International
ANS/ISO11195-95 Gas Mixers for Medical Use—Stand-alone Gas Mixers Approved as an American National Standard with Deviations by ASTM international
ANS/ISO5360-93 Anesthetic Vaporizes—Agent-Specific Filling Systems Approved as an American National Standard with Deviations by ASTM International
ANS/ISO15002-00 Flow-metering devices for connection to terminal units of medical gas pipeline systems
ANS/ISO17025-05 General Requirements for the Competence of Testing and Calibration Laboratories
ANSI/ISO/IEC17024-03 Conformity assessment—General requirements for bodies operating certification of persons
ISO64-97 Guide for inclusion of environmental aspects in product standards
ISO5356-04 Anaesthetic and respiratory equipment—Conical connectors—Part 1: Cones and sockets
ISO5366.3-03 Anaesthetic and Respiratory Equipment—TracheostomyTubes—Part 3: Paediatric Tracheostomy Tubes
ISO9000-00 Quality management systems - Fundamentals and vocabulary
ISO9001-00 Quality management systems - Requirements
ISO9004-00 Quality management systems - Guidelines for performance improvements
ISO9919-05 Medical Electrical Equipment—Particular Requirements for the Basic Safety and Essential Performance of Pulse Oximeter Equipment for Medical Use
ISO14001-04 Environmental management systems—Requirements with guidance for use
ISO14004-04 Environmental management systems—General guidelines on principles, systems and supporting techniques
ISO14010-96 Guidelines for environmental auditing--General principles
ISO14011-96 Guidelines for environmental auditing--Audit procedures--Auditing of environmental management systems
ISO14012-96 Guidelines for environmental auditing--Qualification criteria for environmental auditors
ISO14020-00 Environmental labels and declarations - General principles
ISO14021-99 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling)
ISO14024-01 Environmental labels and declarations -- Type I environmental labelling -- Principles and procedures
ISO14025-00 Technical Report - Environmental labels and declarations - Type III environmental declarations
ISO14031-99 Environmental management - Environmental performance evaluation - Guidelines
ISO14032-99 Technical Report - Environmental management - Examples of environmental performance evaluation (EPE)
ISO14040-97 Environmental management - Life cycle assessment - Principles and framework
ISO14041-98 Environmental management - Life cycle assessment - Goal and scope definition and inventory analysis
ISO14042-00 Environmental management - Life cycle assessment - Life cycle impact assessment
ISO14043-00 Environmental management - Life cycle assessment - Life cycle interpretation
ISO14050-98 Environmental management - Vocabulary
ISO14061-98 Technical Report - Information to assist forestry organizations in the use of Environmental Management System standards ISO 14001and ISO 14004
ISO/ASTM51204-04 Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing
ISO/ASTM51205-02 Standard Practice for Use of a Ceric-Cerous Sulfate Dosimetry System
ISO/ASTM51261-02 Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing
ISO/ASTM51275-04 Standard Practice for Use of a Radiochromic Film Dosimetry System
ISO/ASTM51276-02 Standard Practice for Use of a Polymethylmethacrylate Dosimetry System
ISO/ASTM51310-04 Standard Practice for Use of a Radiochromic Optical Waveguide Dosimetry System
ISO/ASTM51400-03 Standard Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory
ISO/ASTM51401-03 Standard Practice for Use of a Dichromate Dosimetry System
ISO/ASTM51431-05 Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food Processing
ISO/ASTM51538-02 Standard Practice for Use of the Ethanol-Chlorobenzene Dosimetry System
ISO/ASTM51539-05 Standard Guide for Use of Radiation-Sensitive Indicators
ISO/ASTM51540-04 Standard Practice for Use of a Radiochromic Liquid Dosimetry System
ISO/ASTM51607-04 Standard Practice for Use of the Alanine-EPR Dosimetry System
ISO/ASTM51608-05 Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing
ISO/ASTM51631-03 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
ISO/ASTM51649-05 Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV
ISO/ASTM51650-05 Standard Practice for Use of Cellulose Acetate Dosimetry Systems
ISO/ASTM51702-04 Standard Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing
ISO/ASTM51707-05 Standard Guide for Estimating Uncertainties in Dosimetry for Radiation Processing
ISO/ASTM51818-02 Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 keV
ISO/ASTM51900-02 Standard Guide for Dosimetry in Radiation Research on Food and Agricultural Products
ISO/ASTM51939-05 Standard Practice for Blood Irradiation Dosimetry
ISO/ASTM51940-04 Standard Guide for Irradiation of Insects for Sterile Release Programs
ISO/ASTM51956-05 Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ISO/ASTM52116-02 Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma-Ray Irradiator
UOP standard included inside ASTM
UOP1-87 Distillation Range of Heavy Petroleum Oils and Determination of Coke Residue
UOP6-82 Induction Period of Gasolines Using the UOP Oxygen Pressure Vessel
UOP9-85 Hydrogen Sulfide in Gases by the Tutwiler Method
UOP33-82 Peroxide in Gasoline
UOP41-74 Doctor Test for Petroleum Distillates
UOP46-85 Paraffin Wax Content of Petroleum Oils and Asphalts
UOP77-85 Crude Oil Evaluation by Hempel Distillation
UOP79-87 Fractionation of Petroleum Distillates
UOP99-82 Pentane-Insoluble Matter in Petroleum Oils Using a Membrane Filter
UOP114-86 Relative Density of Gas by Schilling Effusion Method
UOP163-05 Hydrogen Sulfide and Mercaptan Sulfur in Liquid Hydrocarbons by Potentiometric Titration
UOP172-89 Flue Gas Analysis
UOP174-84 Storage Stability of Residual Fuel Oils
UOP197-89 Mercaptan Sulfur - Copper Number
UOP202-00 Disulfide Sulfur in Light Petroleum Distillates and LPG
UOP209-00 Alkalinity, Sulfide and Mercaptide Analyses of Used Refinery Caustic Solutions
UOP210-76T Caustic Solution Analysis - Double Indicator
UOP211-79 Caustic Solutions Analysis - Liberation Method
UOP212-05 Hydrogen Sulfide, Mercaptan Sulfur, and Carbonyl Sulfide in Hydrocarbon Gases by Potentiometric Titration
UOP248-92 Alkalinity and Fluoride in Alkaline Solutions
UOP254-87 Apparent Bulk Density of Fluid Cracking Catalyst
UOP262-99 Phenols and Thiophenols in Petroleum Products by Spectrophotometry
UOP269-90 Nitrogen Bases in Hydrocarbons by Potentiometric Titration
UOP274-94 Platinum in Fresh Catalysts by Spectrophotometry
UOP276-85 Pyrrole Nitrogen in Petroleum Distillates by Visible Spectrophotometry
UOP286-89 Free Sulfur in Distillates by Mercury Number
UOP291-02 Total Chloride in Alumina and Silica-Alumina Catalysts by Potentiometric Titration
UOP294-93 Apparent Bulk Density of Catalyst Particles
UOP300-61 Water in Glycol
UOP303-05 Impurities in Catalysts by ICP-OES
UOP304-90 Bromine Number and Bromine Index of Hydrocarbons by Potentiometric Titration
UOP311-02 Hydrocarbon Types by Fluorescent Indicator Adsorption (FIA)
UOP313-89 Nitrogen Bases in Petroleum Distillates by Color Indicator Titration
UOP314-97 Analysis of Refinery Waters for pH, Iron and Copper
UOP315-59 Basic Nitrogen in Gases by Low Temperature Acid Scrubbing
UOP317-66T Chlorine in Hydrogen Gas by a Colorimetric Procedure
UOP320-86 Sulfate in Alumina or Silica-Alumina Base Catalysts-Turbidimetric Method
UOP326-82 Diene Value by Maleic Anhydride Addition Reaction
UOP333-89 Fines in 1.6-mm (1/16-Inch) Spherical Catalysts and Bases by Sieve Analysis
UOP344-87 Moisture in Hydrocarbon Streams Using an On-Line Analyzer
UOP358-64 Bromine Index of Liquid Butane and Petroleum Distillates by Coulometric Titration
UOP364-85 Trace Dissolved Oxygen in Liquids
UOP373-83 Composition of C2 Through C5 Hydrocarbon Gas Mixtures by Gas Chromatography
UOP374-90 p-Phenylenediamine Type Inhibitors in Gasoline
UOP375-86 Calculation of UOP Characterization Factor and Estimation of Molecular Weight of Petroleum Oils
UOP377-90 Free Sulfur in LPG by Mercury Number
UOP379-81 Hydrogen Fluoride in HF Alkylation Regenerator Bottoms
UOP381-63 Traces of Sulfur in Liquefied Petroleum Gases by the Nickel Reduction Method
UOP382-81 Water in Regenerator Bottoms from Hydrogen Fluoride Alkylation
UOP384-76 Nitrogen in Petroleum Distillates and Heavy Oils by Acid Extraction or Direct Kjeldahl Procedure
UOP387-62 Arsenic in Petroleum Stocks and Catalysts by Spectrophotometry
UOP389-04 Trace Metals in Oils by Wet Ashing and ICP-OES
UOP391-91 Trace Metals in Petroleum Products or Organics by AAS
UOP395-95 Total Chloride in Petroleum Distillates by Colorimetry
UOP405-67T Hydrogen Chloride in Gas Streams by Potentiometric Titration
UOP410-85 Sodium in Catalysts by Flame Emission or Atomic Absorption Spectrophotometry
UOP411-92 Normal Paraffins by Subtractive Gas Chromatography
UOP413-82 One Day Fuel Oil Stability
UOP422-66 Particle Size Distribution by Micromesh Sieves
UOP423-85 Thiosulfate in Used Refinery Caustic
UOP425-86 Surface Area, Pore Volume and Pore Diameter of Porous Substances by Nitrogen Adsorption
UOP434-83 Free Water and Volatile Hydrocarbon Content of Molecular Sieves
UOP436-87 Silica in Catalysts by Gravimetric Procedure
UOP437-81 Size Distribution of Molecular Sieve Particles
UOP438-81 Attrition of Molecular Sieve Particles
UOP456-80 Chlorides in Refinery Waters
UOP464-00 Phenol in Light Aromatic Hydrocarbons and Cyclohexane by Spectrophotometry
UOP481-91 Water in Liquid Hydrocarbons by Coulometry
UOP495-03 Aromatics in Molex Process n-Paraffin Products by Ultraviolet Spectrophotometry
UOP501-02 Hydrocarbon Types by Fluorescent Indicator Adsorption (FIA) at Elevated Temperatures
UOP515-68T Residue and Organic Residue in Waste Waters
UOP516-00 Sampling and Handling of Gasolines, Distillate Fuels and C3-C4 Fractions
UOP523-96 Glycol and Carom Solvent Distribution in Mixtures by GC
UOP537-91 Alcohol and Ketone Mixtures by GC
UOP539-97 Refinery Gas Analysis by Gas Chromatography
UOP543-97 Trace Non-Aromatic Hydrocarbons in High-Purity Aromatics by Gas Chromatography
UOP547-97 Laboratory Hydrogen Sulfide and Mercaptan Extraction
UOP549-81 Sodium in Petroleum Distillates by Flame Emission, Using an Atomic Absorption Spectrophotometer
UOP551-86 Hexanes and Lower Boiling Hydrocarbons in Olefin Free Gasolines by GC
UOP555-96 Trace Impurities in High-Purity Benzene and Cyclohexane by GC
UOP563-90 Packed Apparent Bulk Density of Molecular Sieves
UOP565-05 Acid Number and Naphthenic Acids by Titration
UOP569-79 Methanol in Petroleum Distillates and LPG by Gas Chromatography
UOP578-02 Automated Pore Volume and Pore Size Distribution of Porous Substances by Mercury Porosimetry
UOP586-71 Sulfur in Hydrocarbons by Oxy - Hydrogen Combustion
UOP587-92 Acid Number and Naphthenic Acids by Colorimetric Titration
UOP588-94 Total, Inorganic and Organic Chloride in Hydrocarbons by Potentiometric Titration
UOP592-85 Palladium in Catalysts by Visible Spectrophotometry
UOP602-89 Soxhlet Extraction of Catalyst
UOP603-88 Trace CO and CO2 in Hydrogen and Light Gaseous Hydrocarbons by GC
UOP614-02 Heptane-Insoluble Matter in Petroleum Oils Using a Membrane Filter
UOP619-83 Fluorine in Hydrocarbons by Oxy-Hydrogen Combustion
UOP621-98 Boiling Point Distribution of Hydrocarbons by Gas Chromatography
UOP624-94 Carbonyl Number by Chemical Analysis
UOP629-90 Analysis of Hydrogen Fluoride Alkylation Catalysts and Regenerator Bottoms
UOP649-74 Total Oxygen in Organic Materials by Pyrolysis-Gas Chromatographic Technique
UOP670-68 Carbon Structure of C7 and Lower Boiling Hydrocarbons in Olefinic Samples by Hydrogenation and Capillary Column Gas Chromatography
UOP672-84 Aromatic Hydrocarbon Types in Detergent Alkylates Using Low Voltage Mass Spectrometry
UOP673-06 Linear Alkylbenzene Isomer Distribution in Detergent Alkylate by GC
UOP676-84 Molecular Weight by Vapor Pressure Osmometry
UOP678-04 Dissolved Molecular Oxygen in Liquid Hydrocarbons by Electrochemical Detection
UOP682-84 Total Cyanide in Refinery Waters by Visible Spectrophotometry
UOP683-86 Sulfide in Refinery Waste Water
UOP688-92 Normal Olefins and Normal Paraffins by Gas Chromatography
UOP690-99 Octanes and Lower Boiling Hydrocarbons in Olefin-Free Gasolines by GC
UOP699-91 Sodium in Liquefied Petroleum Gas by AAS
UOP700-70 Free Sulfur In Petroleum Distillates and LPG by the AC Polarograph
UOP702-90 Impurities in Distilled High Purity Cumene by GC
UOP703-98 Carbon on Catalysts by Induction Furnance Combustion and Infrared Detection
UOP704-70 Equivalent Weights of Heavy Organic Amines By Non-Aqueous Potentiometric Titration
UOP714-87 Metals in Miscellaneous Samples by ICP-AES
UOP715-85 Rhenium Catalysts by Spectrophotometry
UOP720-93 Impurities in High Purity p-Xylene by GC
UOP725-86 Pentenes and Lower Boiling Hydrocarbons in Olefinic Gasolines by GC
UOP729-76T Phenols in Light Distillates by Direct Titration
UOP731-74 Total Sulfur in Heavy Oils, Tars and Solids by Microcoulometric Titration, Single Entry Boat Technique
UOP735-73 Hydrogen Content of Gases by Gas Chromatography
UOP740-79T Volatile Nitrogen Bases, Including Ammonia in Solids and Aqueous Solutions
UOP741-86 Paraffin and Naphthene Distribution by Carbon Number of SaturatedPetroleum Distillates by GC
UOP742-86 Sulfate in Catalyst by a Gravimetric Method
UOP743-73T Acid Oils in Refinery Caustic by Liberation
UOP744-04 Aromatics in Hydrocarbons by Gas Chromatography
UOP755-92 Trace Impurities in High-Purity Ethylbenzene by Gas Chromatography
UOP759-76 Trace Oxygen in Gases by Gas Chromatography
UOP762-76 Apparent Bulk Density of Solid Phosphoric Acid Catalyst
UOP766-91 Piece Density by Mercury Displacement
UOP772-77 Mercaptan Sulfur in LPG by Microcoulometry
UOP778-81 Apparent Bulk Density of Extruded Catalyst
UOP779-92 Chloride in Petroleum Distillates by Microcoulometry
UOP780-92 Carbohydrates by HPLC
UOP787-78 Silicones in Petroleum Distillates by Atomic Absorption Spectrophotometry
UOP791-94 Sulfur Components in LPG or C5 Minus Hydrocarbon Fractions by GC-SCD
UOP792-78 The Colorimetric Determination of Silica in Aqueous Solutions
UOP793-82 Color Stability of Petroleum Distillates
UOP798-96 Trace p-DEB or Indian in C8 Aromatics and Trace C8 Aromatics in p-DEB by GC
UOP800-79 Vanadium, Nickel and Iron in Petroleum Oils by Atomic Absorption Spectrophotometry
UOP801-80 Size Distribution of Charcoal Particles
UOP802-80 Attrition of Charcoal Particles
UOP803-84 Chlorination Color of Phenol by Spectrophotometry
UOP804-83 Carbonyl Content of Phenol by Visible Spectrophotometry
UOP806-84 Alcohol Impurities in Acetone
UOP808-84 Alkalinity of Acetone
UOP809-84 Acidity of Acetone
UOP810-84 Residue on Evaporation of Acetone
UOP815-87 Acid Insolubles in Catalysts
UOP816-80 Refractive Index of Hydrocarbon Liquids
UOP818-81 Thiosulfate in Lean Amine Solutions
UOP821-81 Automated Micro Pore Size Distribution of Porous Substances by Nitrogen Adsorption and/or Desorption Using a Micromeritics Analyzer
UOP822-81 Specific Gravity of Coke and Powdered Asphalts
UOP823-90 Platinum in Fresh Platinum-Rhenium Catalysts by Spectrophotometry
UOP824-81 Diethanolamine in Solution by Color Indicator Titration
UOP825-81 Monoethanolamine in Solutions by Color Indicator Titration
UOP826-81 Carbon Dioxide in Amine Solution
UOP827-81 Apparent Hydrogen Sulfide in Amine Solutions
UOP828-81 Total Amine in Solutions
UOP829-82 Titrimatric Determination of CO2 in Ethanolamines
UOP832-83 Carbon Structure of C9 and Lower Boiling Hydrocarbons by Gas Chromatography
UOP833-82 Molybdenum in Platforming Catalysts and Fines by Atomic Absorption Spectrophotometry
UOP834-82 Arsine in Ethylene by Electrothermal Atomic Absorption Spectrophotometry
UOP835-82 Accelerated Fuel Oil Stability
UOP836-82 Sulfur in Distillate and Residual Oils by X-Ray Flourescence
UOP841-83 Trans Olefins in Fatty Acids, Esters or Triglycerides by IR Spectroscopy
UOP842-83 Nickel, Iron, Sulfur and Vanadium in Distillate, Residual Oils and Pitches by XRF
UOP845-90 Trace Alcohols in LPG by GC
UOP846-83 Composition of C4 Olex Effluent by Gas Chromatography
UOP847-86 Dewaxing of Petroleum Products
UOP848-84 Nickel, Vanadium, Iron, Lead, Copper and Sodium in Gas Oils by AAS
UOP851-84 Density of Powders and Solids by Helium Displacement
UOP854-85 Size Distribution of Solid Phosphoric Acid Catalyst
UOP856-85 Particle Size Distribution of Powders by Laser Light Scattering
UOP863-01 Trace Desorbent in C10-C18 Molex Products by GC
UOP864-89 Sulfur in Organic and Inorganic Materials by Combustion and IR Detection
UOP865-86 Phosphorus in Catalysts by Visible Spectrophotometry
UOP866-86 Carbon, Hydrogen and Nitrogen by Oxidative Pyrolysis
UOP868-88 Trace Saturates in High Purity Aromatics by GC
UOP870-90 Carbon Number Distribution of Paraffins, Naphthenes and Aromatics by GC
UOP873-86 Noble Metals and Modifiers in Catalysts by ICP-AES
UOP874-88 Pore Size Distribution of Porous Substnces by Nitrogen Adsoprtion Using a Quantachrome Analyzer
UOP876-93 Platinum in Chloroplatinic Acid by Spectrophotometry
UOP878-87 Potassium in Catalysts by Atomic Absorption
UOP879-87 Aluminum in Catalysts by Atomic Absorption
UOP880-96 Hydrocarbon Types in Low Olefin Distillates by GC
UOP887-89 Rhenium in Perrhenic Acid and Ammonium Perrhenate by Spectrophotometry
UOP894-91 Mercury in Catalysts by GF-AAS
UOP896-93 Platinum in Spent Catalyst
UOP899-04 Trace Hydrocarbons in Hydrogen or LPG by Gas Chromatography
UOP905-91 Platinum Agglomeration by X-Ray Diffraction
UOP912-94 Fluoride in Catalysts, Molecular Sieves and Aqueous Solutions by Ion Selective Electrode
UOP913-92 Impurities in Styrene by Gas Chromatography
UOP914-92 Automated Crush Strength of Catalysts or Molecular Sieves
UOP915-92 Normal Paraffins by Capillary Gas Chromatography
UOP916-93 Palladium, Gold and Potassium in Silica Catalyst by ICP-AES
UOP917-93 Palladium in Fresh and Spent Alumina Catalyst by Spectrophotometry
UOP918-92 Collection and Grinding of Adsorbents and Catalysts for Analysis
UOP923-97 Total Sulfur in LPG by Hydrogenolysis
UOP924-00 Nickel, Tungsten, Sodium and Aluminum in Hydrocracking Catalysts by ICP-AES
UOP925-92 Nickel, Molybdenum, Phosphorus, Cobalt and Aluminum in Fresh Catalysts by ICP-AES
UOP926-92 Aluminum and Silicon In Fresh Catalysts by Lithium Metaborate Fusion/ICP-AES
UOP927-92 Trace Metallic Impurities in Fresh Catalysts by ICP-AES
UOP931-94 Trace Impurities in Mixed Xylenes by Gas Chromatography
UOP933-94 Test Procedures for Plant Deposits, Scales and Sludges
UOP934-94 Diolefins in C5 Olefinic Hydrocarbon Streams by GC
UOP935-94 Mercaptain Types In Kerosine by NMR
UOP936-95 Combined Nitrogen in LPG by Chemiluminescence
UOP938-00 Total Mercury and Mercury Species in Liquid Hydrocarbons
UOP939-96 Basic Nitrogen in LPG by Ion Chromatography
UOP944-96 Surface Area of Fresh and Regenerated Catalyst
UOP945-96 Platinum Dispersion on Platinum or Platinum/Tin Catalyst by Hydrogen-Oxygen Titration
UOP946-96 Arsenic in Petroleum Naphthas by HG-AAS
UOP947-96 Length and Diameter of Extruded Catalyst Using a Semi-Automated Method
UOP948-96 Relative Density of Gas Mixtures by Calculation From Composition
UOP952-97 Trace Lead in Gasolines and Naphthas by GF-AAS
UOP953-97 Sulfate and Thiosulfate in Caustic Aqueous Solutions by Ion Chromatography
UOP954-03 Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents
UOP958-98 Ammonia in Hydrocarbons
UOP959-98 Ammonium Determination in Aqueous Solutions by Ion Chromatography
UOP961-98 Elemental Composition of Zeolites by ICP-AES
UOP962-98 Copper in Gasoline and Naphtha by Flame-AAS or ICP-AES
UOP963-98 Trace Aromatic Hydrocarbons in 90 to 400°C Boiling Range Petroleum Distillates by HPLC
UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
UOP967-00 Automated Crush Strength of Spherical Catalysts
UOP968-00 Foots Oil in Methyl Isobutyl Ketone by GC
UOP969-00 Permanganate Fading for Acetic Acid
UOP971-00 Trace Nitrogen in Light Aromatic Hydrocarbons by Chemiluminescence
UOP972-01 Aluminum, Silicon and Silver in Acetic Acid by ICP-OES
UOP973-01 Automated Crush Strength of Extruded Catalysts
UOP975-02 Fluorine in Liquid Hydrocarbons and LPG by Oxidative Combustion with Ion-Selective Electrode Detection
UOP976-02 Trace C4-C9 Saturates in High Purity Aromatics by GC
UOP979-02 Total Chloride in Alumina Supported Catalysts by Wavelength Dispersive X-Ray Fluorescence
UOP980-03 C5 and Lower Boiling Dienes, Olefins, and Parafins in Naphthas by GC
UOP983-04 Acetylenes in 1,3-Butadiene by GC
UOP999-05 Precision Statements in UOP Methods

 

 

 

 

 

 

 

 

Content      ..     1      2      3      4      ..