|
|
C1540-04 Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1541-04 Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings
C1564-04 Guide for Use of Silicone Sealants for Protective Glazing Systems
C1589-05 Practice for Outdoor Weathering of Construction Seals and Sealants
D2202-00 Test Method for Slump of Sealants
D2203-01 Test Method for Staining from Sealants
D2377-00 Test Method for Tack-Free Time of Caulking Compounds and Sealants
D2452-03 Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
D2453-03 Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
D2859-04 Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
E0084-05E01 Test Method for Surface Burning Characteristics of Building Materials
E0108-04 Test Methods for Fire Tests of Roof Coverings
E0119-00A Test Methods for Fire Tests of Building Construction and Materials
E0136-04 Test Method for Behavior of Materials in a Vertical Tube Furnace at 750|SDC
E0162-02A Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
E0176-05 Terminology of Fire Standards
E0535-05A Practice for Preparation of Fire-Test-Response Standards
E0603-04 Guide for Room Fire Experiments
E0648-04 Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
E0662-03E01 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
E0800-05 Guide for Measurement of Gases Present or Generated During Fires
E0814-02 Test Method for Fire Tests of Through-Penetration Fire Stops
E0906-04 Test Method for Heat and Visible Smoke Release Rates for Materials and Products
E0970-00 Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
E1317-97AR02 Test Method for Flammability of Marine Surface Finishes
E1321-97AR02 Test Method for Determining Material Ignition and Flame Spread Properties
E1352-02 Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
E1353-02 Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
E1354-04A Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
E1355-05A Guide for Evaluating the Predictive Capability of Deterministic Fire Models
E1472-05 Guide for Documenting Computer Software for Fire Models
E1474-04E01 Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
E1529-00 Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
E1537-02A Test Method for Fire Testing of Upholstered Furniture
E1546-00E01 Guide for Development of Fire-Hazard-Assessment Standards
E1590-02 Test Method for Fire Testing of Mattresses
E1591-00E01 Guide for Obtaining Data for Deterministic Fire Models
E1623-04 Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
E1678-02 Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
E1725-95R01E01 Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
E1740-02 Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
E1776-01E01 Guide for Development of Fire-Risk-Assessment Standards
E1822-02B Test Method for Fire Testing of Stacked Chairs
E1895-04E01 Guide for Determining Uses and Limitations of Deterministic Fire Models
E1966-01 Test Method for Fire-Resistive Joint Systems
E1995-04A Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
E2010-01 Test Method for Positive Pressure Fire Tests of Window Assemblies
E2032-99E01 Guide for Extension of Data From Fire Endurance Tests
E2058-03 Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
E2061-03 Guide for Fire Hazard Assessment of Rail Transportation Vehicles
E2067-03 Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
E2074-00E01 Test Method for Fire Tests of Door Assemblies, Including Positive Pressure Testing of Side-Hinged and Pivoted Swinging Door Assemblies
E2102-04A Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
E2187-04 Test Method for Measuring the Ignition Strength of Cigarettes
E2226-02 Practice for Application of Hose Stream
E2230-02 Practice for Thermal Qualification of Type B Packages for Radioactive Material
E2231-02E01 Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
E2257-03 Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
E2280-03E01 Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
E2307-04E01 Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
E2335-04 Guide for Laboratory Monitors
E2336-04 Test Methods for Fire Resistive Grease Duct Enclosure Systems
E2404-05 Practice for Specimen Preparation and Mounting of Paper or Vinyl Wall Coverings to Assess Surface Burning Characteristics
E2405-05 Test Method for Determination of Fire and Thermal Parameters of Materials Using an Intermediate Scale Test with Vertically Oriented Specimen
Volume 04.08, March 2005
Soil and Rock (I): D 420 - D 5611
D0420-98R03 Guide to Site Characterization for Engineering Design and Construction Purposes
D0421-85R02 Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
D0422-63R02 Test Method for Particle-Size Analysis of Soils
D0425-88R01 Test Method for Centrifuge Moisture Equivalent of Soils
D0427-04 Test Method for Shrinkage Factors of Soils by the Mercury Method
D0558-04 Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
D0559-03 Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
D0560-03 Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
D0653-04 Terminology Relating to Soil, Rock, and Contained Fluids
D0698-00AE01 Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft (600 kN-m/m))
D0806-00 Test Method for Cement Content of Hardened Soil-Cement Mixtures
D0854-02 Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
D1140-00 Test Method for Amount of Material in Soils Finer Than the No. 200 (75-|gmm) Sieve
D1143-81R94E01 Test Method for Piles Under Static Axial Compressive Load
D1194 Test Method for Bearing Capacity of Soil for Static Load and Spread Footings
D1241-00 Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses
D1411-04 Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes
D1452-80R00 Practice for Soil Investigation and Sampling by Auger Borings
D1556-00 Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
D1557-02E01 Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft(2,700 kN-m/m))
D1558-99R04E01 Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils
D1586-99 Test Method for Penetration Test and Split-Barrel Sampling of Soils
D1587-00 Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
D1632-96 Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
D1633-00 Test Method for Compressive Strength of Molded Soil-Cement Cylinders
D1634-00 Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
D1635-00 Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
D1883-99 Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
D1997-91R01 Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
D2113-99 Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
D2166-00E01 Test Method for Unconfined Compressive Strength of Cohesive Soil
D2167-94R01 Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
D2168-02A Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
D2216-98 Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
D2217-85R98 Practice for Wet Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
D2325-68R00 Test Method for Capillary-Moisture Relationships for Coarse- and Medium-Textured Soils by Porous-Plate Apparatus
D2434-68R00 Test Method for Permeability of Granular Soils (Constant Head)
D2435-04 Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
D2487-00 Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
D2488-00 Practice for Description and Identification of Soils (Visual-Manual Procedure)
D2573-01 Test Method for Field Vane Shear Test in Cohesive Soil
D2664-04 Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
D2844-01E01 Test Method for Resistance -Value and Expansion Pressure of Compacted Soils
D2845-00R04E01 Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock
D2850-03A Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
D2901-99 Test Method for Cement Content of Freshly Mixed Soil-Cement
D2922-04 Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
D2936-95R04E01 Test Method for Direct Tensile Strength of Intact Rock Core Specimens
D2937-04 Test Method for Density of Soil in Place by the Drive-Cylinder Method
D2938-95R02 Test Method for Unconfined Compressive Strength of Intact Rock Core Specimens
D2944-71R98 Test Method of Sampling Processed Peat Materials
D2973-71R04 Test Method for Total Nitrogen in Peat Materials
D2974-00 Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
D2976-71R04 Test Method for pH of Peat Materials
D2977-03 Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
D2978-03 Test Method for Volume of Processed Peat Materials
D2980-04 Test Method for Volume Mass, Moisture-Holding Capacity, and Porocity of Saturated Peat Materials
D3017-04 Test Method for Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth)
D3080-04 Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
D3148-02 Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
D3152-72R00 Test Method for Capillary-Moisture Relationships for Fine-Textured Soils by Pressure-Membrane Apparatus
D3155-98 Test Method for Lime Content of Uncured Soil-Lime Mixtures
D3213-03 Practices for Handling, Storing, and Preparing Soft Undisturbed Marine Soil
D3282-93R04E01 Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
D3385-03 Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
D3404-91R04 Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
D3441-98 Test Method for Mechanical Cone Penetration Tests of Soil
D3550-01 Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
D3551-02 Practice for Laboratory Preparation of Soil-Lime Mixtures Using a Mechanical Mixer
D3689 Test Method for Individual Piles Under Static Axial Tensile Load
D3740-04A Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
D3877-02 Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures
D3966 Test Method for Piles Under Lateral Loads
D3967-95AR04 Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
D3999-91R03 Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
D4015-92R00 Test Methods for Modulus and Damping of Soils by the Resonant-Column Method
D4016-02 Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
D4043-96R04 Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
D4044-96R02 Test Method (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifiers
D4050-96R02 Test Method (Field Procedure) for Withdrawal and Injection Well Tests for Determining Hydraulic Properties of Aquifer Systems
D4083-89R01E01 Practice for Description of Frozen Soils (Visual-Manual Procedure)
D4104-96R04 Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
D4105-96R02 Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
D4106-96R02 Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
D4186-89R98E01 Test Method for One-Dimensional Consolidation Properties of Soils Using Controlled-Strain Loading
D4219-02 Test Method for Unconfined Compressive Strength Index of Chemical- Grouted Soils
D4220-95R00 Practices for Preserving and Transporting Soil Samples
D4221-99 Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
D4223-99 Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
D4253-00 Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
D4254-00 Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
D4318-00 Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
D4319-93R01 Test Method for Distribution Ratios by the Short-Term Batch Method
D4320-04 Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters
D4341-03 Test Method for Creep of Hard Rock Core Specimens in Uniaxial Compression at Ambient or Elevated Temperature
D4373-02 Test Method for Rapid Determination of Carbonate Content of Soils
D4380-84R01 Test Method for Density of Bentonitic Slurries
D4381-84R01 Test Method for Sand Content by Volume of Bentonitic Slurries
D4394-04 Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Rigid Plate Loading Method
D4395-04 Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Flexible Plate Loading Method
D4403-84R00E01 Practice for Extensometers Used in Rock
D4404-84R04 Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
D4405-04 Test Method for Creep of Soft Rock Core Specimens in Uniaxial Compression at Ambient or Elevated Temperature
D4406-04 Test Method for Creep of Rock Core Specimens in Triaxial Compression at Ambient or Elevated Tempertures
D4427-92R02E01 Classification of Peat Samples by Laboratory Testing
D4428_D4428M-00 Test Methods for Crosshole Seismic Testing
D4429-04 Test Method for CBR (California Bearing Ratio) of Soils in Place
D4435-04 Test Method for Rock Bolt Anchor Pull Test
D4436-04 Test Method for Rock Bolt Long-Term Load Retention Test
D4452-85R02E01 Test Methods for X-Ray Radiography of Soil Samples
D4506-02 Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using a Radial Jacking Test
D4511-00 Test Method for Hydraulic Conductivity of Essentially Saturated Peat
D4525-04 Test Method for Permeability of Rocks by Flowing Air
D4531-86R02 Test Methods for Bulk Density of Peat and Peat Products
D4535-85R04 Test Methods for Measurement of Thermal Expansion of Rock Using a Dilatometer
D4542-95R01 Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
D4543-04 Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances
D4544-86R02 Practice for Estimating Peat Deposit Thickness
D4546-03 Test Methods for One-Dimensional Swell or Settlement Potential of Cohesive Soils
D4553-02 Test Method for Determining In Situ Creep Characteristics of Rock
D4554-02 Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities
D4555-01 Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test
D4564-02A Test Method for Density of Soil in Place by the Sleeve Method
D4609-01 Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization
D4611-86R04 Test Method for Specific Heat of Rock and Soil
D4612-03 Practice for Calculating Thermal Diffusivity of Rocks
D4623-02 Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method\MUSBM Borehole Deformation Gage
D4630-96R02 Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
D4631-95R00 Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
D4643-00 Test Method for Determination of Water (Moisture) Content of Soil by the Microwave Oven Method
D4644-04 Test Method for Slake Durability of Shales and Similar Weak Rocks
D4645-04E01 Test Method for Determination of the In-Situ Stress in Rock Using the Hydraulic Fracturing Method
D4647-93R98E01 Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
D4648-00 Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
D4696-92R00 Guide for Pore-Liquid Sampling from the Vadose Zone
D4700-91R98E01 Guide for Soil Sampling from the Vadose Zone
D4718-87R01 Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
D4719-00 Test Method for Pressuremeter Testing in Soils
D4729-04 Test Method for In Situ Stress and Modulus of Deformation Using the Flatjack Method
D4750-87R01 Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well)
D4753-02 Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
D4767-04 Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
D4829-03 Test Method for Expansion Index of Soils
D4832-02 Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
D4879-02 Guide for Geotechnical Mapping of Large Underground Openings in Rock
D4914-99 Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
D4943-02 Test Method for Shrinkage Factors of Soils by the Wax Method
D4944-04 Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
D4945-00 Test Method for High-Strain Dynamic Testing of Piles
D4959-00 Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating Method
D4971-02 Test Method for Determining the In Situ Modulus of Deformation of Rock Using the Diametrically Loaded 76-mm (3-in.) Borehole Jack
D4972-01 Test Method for pH of Soils
D4992-94R01 Practice for Evaluation of Rock to be Used for Erosion Control
D5030-04 Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
D5079-02 Practices for Preserving and Transporting Rock Core Samples
D5080-00 Test Method for Rapid Determination of Percent Compaction
D5084-03 Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
D5088-02 Practices for Decontamination of Field Equipment Used at Waste Sites
D5092-04E01 Practice for Design and Installation of Ground Water Monitoring Wells
D5093-02 Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
D5102-04 Test Methods for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
D5121-90R01 Practice for Preparation of Rock Slabs for Durability Testing
D5126-90R04 Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
D5143-91R04 Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography
D5195-02 Test Method for Density of Soil and Rock In-Place at Depths Below the Surface by Nuclear Methods
D5202-02 Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
D5220-02 Test Method for Water Content of Soil and Rock In-Place by the Neutron Depth Probe Method
D5239-04 Practice for Characterizing Fly Ash for Use in Soil Stabilization
D5240-04 Test Method for Testing Rock Slabs to Evaluate Soundness of Riprap by Use of Sodium Sulfate or Magnesium Sulfate
D5254-92R04 Practice for Minimum Set of Data Elements to Identify a Ground-Water Site
D5255-01 Practice for Certification of Personnel Engaged in the Testing of Soil and Rock
D5268-02 Specification for Topsoil Used for Landscaping Purposes
D5269-96R02 Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
D5270-96R02 Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
D5298-03 Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
D5299-99 Guide for Decommissioning of Ground Water Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
D5311-92R04 Test Method for Load Controlled Cyclic Triaxial Strength of Soil
D5312-04 Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
D5313-04 Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions
D5314-92R01 Guide for Soil Gas Monitoring in the Vadose Zone
D5333-03 Test Method for Measurement of Collapse Potential of Soils
D5334-00R04 Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
D5335-04 Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages
D5407-95R00 Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement
D5408-93R04 Guide for Set of Data Elements to Describe a Ground-Water Site; Part One\MAdditional Identification Descriptors
D5409-93R04 Guide for Set of Data Elements to Describe a Ground-Water Site; Part Two\MPhysical Descriptors
D5410-93R98 Guide for Set of Data Elements to Describe a Ground-Water Site;Part Three\MUsage Descriptors
D5434-03 Guide for Field Logging of Subsurface Explorations of Soil and Rock
D5435-03 Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection
D5447-04 Guide for Application of a Ground-Water Flow Model to a Site-Specific Problem
D5472-93R99E01 Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
D5473-93R00 Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer
D5474-93R00 Guide for Selection of Data Elements for Ground-Water Investigations
D5490-93R02 Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information
D5518 Guide for Acquisition of File Aerial Photography and Imagery for Establishing Historic Site-Use and Surficial Conditions
D5519-94R01 Test Method for Particle Size Analysis of Natural and Man-Made Riprap Materials
D5520-94R01 Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
D5521 Guide for Development of Ground-Water Monitoring Wells in Granular Aquifers
D5522 Specification for Minimum Requirements for Laboratories Engaged in Chemical Analysis of Soil, Rock, and Contained Fluid
D5539-94R03 Specification for Seed Starter Mix
D5549 Guide for The Contents of Geostatistical Site Investigation Report
D5550-00 Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
D5607-02 Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
D5608-01 Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites
D5609-94R02 Guide for Defining Boundary Conditions in Ground-Water Flow Modeling
D5610-94R02 Guide for Defining Initial Conditions in Ground-Water Flow Modeling
D5611-94R02 Guide for Conducting a Sensitivity Analysis for a Ground-Water Flow Model Application
Volume 04.09, April 2005
Soil and Rock (II): D 5714 - latest
D5714-95R02 Specification for Content of Digital Geospatial Metadata
D5715-00 Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)
D5716-95R00 Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
D5717-95E01 Guide for Design of Ground-Water Monitoring Systems in Karst and Fractured-Rock Aquifers
D5718-95R00 Guide for Documenting a Ground-Water Flow Model Application
D5719-95R00 Guide for Simulation of Subsurface Airflow Using Ground-Water Flow Modeling Codes
D5720-95R02 Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes
D5730-04 Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Ground Water
D5731-02 Test Method for Determination of the Point Load Strength Index of Rock
D5737-95R00 Guide for Methods for Measuring Well Discharge
D5738-95R00 Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements\MDiagrams for Single Analyses
D5753 Guide for Planning and Conducting Borehole Geophysical Logging
D5754-95R00 Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements\MTrilinear Diagrams for Two or More Analyses
D5777-00 Guide for Using the Seismic Refraction Method for Subsurface Investigation
D5778-95R00 Test Method for Performing Electronic Friction Cone and Piezocone Penetration Testing of Soils
D5779-95AR01 Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control
D5780-95R02 Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load
D5781-95R00 Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5782-95R00 Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5783-95R00 Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5784-95R00 Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5785-95R00 Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
D5786-95R00 Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems
D5787-95R00 Practice for Monitoring Well Protection
D5850-95R00 Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
D5852-00 Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
D5855-95R00 Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of a Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in a Flowing Well
D5856-95R02E01 Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
D5872-95R00 Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
D5873-00 Test Method for Determination of Rock Hardness by Rebound Hammer Method
D5874-02 Test Method for Determination of the Impact Value (IV) of a Soil
D5875-95R00 Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
D5876-95R00 Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
D5877-95R00 Guide for Displaying Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements\MDiagrams Based on Data Analytical Calculations
D5878-00 Guide for Using Rock-Mass Classification Systems for Engineering Purposes
D5879-95R03 Practice for Surface Site Characterization for On-Site Septic Systems
D5880-95R00 Guide for Subsurface Flow and Transport Modeling
D5881-95R00 Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
D5882-00 Test Method for Low Strain Integrity Testing of Piles
D5883-96R02 Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
D5903-96R01 Guide for Planning and Preparing for a Groundwater Sampling Event
D5911-96R02E01 Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site
D5912-96R04 Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
D5918-96R01 Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils
D5920-96 Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method
D5921-96R03E01 Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems
D5922-96R04 Guide for Analysis of Spatial Variation in Geostatistical Site Investigations
D5923-96R04 Guide for Selection of Kriging Methods in Geostatistical Site Investigations
D5924-96R04 Guide for Selection of Simulation Approaches in Geostatistical Site Investigations
D5925-96E01 Practice for Preliminary Sizing and Delineation of Soil Absorption Field Areas for On-Site Septic Systems
D5971-01 Practice for Sampling Freshly Mixed Controlled Low-Strength Material
D5978-96E01 Guide for Maintenance and Rehabilitation of Ground-Water Monitoring Wells
D5979-96R02 Guide for Conceptualization and Characterization of Ground-Water Systems
D5980-96R04 Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring
D5981-96R02 Guide for Calibrating a Ground-Water Flow Model Application
D5982-02 Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
D5995-98R04 Guide for Environmental Site Characterization in Cold Regions
D6000-96R02 Guide for Presentation of Water-Level Information From Ground-Water Sites
D6001-96R02 Guide for Direct-Push Water Sampling for Geoenvironmental Investigations
D6023-02 Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
D6024-02 Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
D6025-96R02 Guide for Developing and Evaluating Ground-Water Modeling Codes
D6026-01E01 Practice for Using Significant Digits in Geotechnical Data
D6027-96R04 Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes
D6028-96R04 Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
D6029-96R04 Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
D6030-96R02 Guide for Selection of Methods for Assessing Ground Water or Aquifer Sensitivity and Vulnerability
D6031-96R04 Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
D6032-02 Test Method for Determining Rock Quality Designation (RQD) of Rock Core
D6033-96R02 Guide for Describing the Functionality of a Ground-Water Modeling Code
D6034-96R04 Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
D6035-02 Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Undisturbed Soil Specimens Using a Flexible Wall Permeameter
D6036-96R02 Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements\MUse of Maps
D6066-96R04 Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
D6067-96R03 Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization
D6089-97R03E01 Guide for Documenting a Ground-Water Sampling Event
D6092-97R03 Practice for Specifying Standard Sizes of Stone for Erosion Control
D6103-04 Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)
D6106-97R04 Guide for Establishing Nomenclature of Ground-Water Aquifers
D6128-00 Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell
D6151-97R03 Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
D6167-97R04 Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
D6168-97R04 Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids
D6169-98 Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
D6170-97R04 Guide for Selecting a Ground-Water Modeling Code
D6171-97R04 Guide for Documenting a Ground-Water Modeling Code
D6187-97R03 Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
D6230-98 Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
D6235-04 Practice for Expedited Site Characterization of Vadose Zone and Ground Water Contamination at Hazardous Waste Contaminated Sites
D6236-98R04 Guide for Coring and Logging Cement - or Lime-Stabilized Soil
D6274-98R04 Guide for Conducting Borehole Geophysical Logging - Gamma
D6276-99A Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
D6282-98 Guide for Direct Push Soil Sampling for Environmental Site Characterizations
D6285-99 Guide for Locating Abandoned Wells
D6286-98 Guide for Selection of Drilling Methods for Environmental Site Characterization
D6312-98 Guide for Developing Appropriate Statistical Approaches for Ground-Water Detection Monitoring Programs
D6391-99R04 Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
D6393-99 Test Method for Bulk Solids Characterization by Carr Indices
D6429-99 Guide for Selecting Surface Geophysical Methods
D6430-99 Guide for Using the Gravity Method for Subsurface Investigation
D6431-99 Guide for Using the Direct Current Resistivity Method for Subsurface Investigation
D6432-99 Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
D6449-99 Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
D6452-99 Guide for Purging Methods for Wells Used for Ground-Water Quality Investigations
D6453-99 Guide for Format of Computerized Exchange of Soil and Rock Test Data
D6459-99 Test Method for Determination of Erosion Control Blanket (ECB) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
D6460-00 Test Method for Determination of Erosion Control (ECB) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D6461-99 Specification for Silt Fence Materials
D6462-03 Practice for Silt Fence Installation
D6467-99 Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
D6473-99 Test Method For Specific Gravity And Absorption of Rock For Erosion Control
D6475-00 Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
D6517-00 Guide for Field Preservation of Ground-Water Samples
D6519-02 Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
D6527-00 Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
D6528-00 Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
D6539-00 Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air
D6564-00 Guide for Field Filtration of Ground-Water Samples
D6565-00 Test Method for Determination of Water (Moisture) Content in Soil by the Time-Domain Reflectometry (TDR) Method
D6572-00 Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
D6598-00 Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations
D6599-00 Practice for Construction of Live Fascines on Slopes
D6629-01 Guide for Selection of Methods for Estimating Soil Loss by Erosion
D6634-01 Guide for the Selection of Purging and Sampling Devices for Ground-Water Monitoring Wells
D6635-01 Test Method for Performing the Flat Plate Dilatometer
D6639-01 Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations
D6642-01 Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux
D6682-01 Test Method for Measuring the Shear Stresses of Powders Using the Peschl Rotational Split Level Shear Tester
D6683-01 Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids
D6684-04 Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
D6685-01 Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
D6711-01 Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
D6724-04 Guide for Installation of Direct Push Ground Water Monitoring Wells
D6725-04 Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
D6726-01 Guide for Conducting Borehole Geophysical Logging\MElectromagnetic Induction
D6727-01 Guide for Conducting Borehole Geophysical Logging\MNeutron
D6758-02 Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by an Electro-Mechanical Method
D6760-02 Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
D6765-02 Practice for Live Staking
D6771-02 Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations
D6773-02 Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester
D6780-02 Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
D6820-02 Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation
D6825-02E02 Guide for Placement of Riprap Revetments
D6836-02 Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
D6884-03 Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems
D6910-04 Test Method for Marsh Funnel Viscosity of Clay Construction Slurries
D6911-03 Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
D6913-04 Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
D6914-04E01 Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
D6939-03 Practice for Brushmattressing
D6940-04 Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
D6941-04 Practice for Measuring Fluidization Segregation Tendencies of Powders
D7012-04 Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
D7013-04 Guide for Nuclear Surface Moisture and Density Gauge Calibration Facility Setup
D7014-04 Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
D7015-04 Practices for Obtaining Undisturbed Block (Cubical and Cylindrical) Samples of Soils
D7045-04 Guide for Optimization of Ground Water Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities
D7046-04 Guide for Use of the Metal Detection Method for Subsurface Investigation
D7047-04 Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) Used as a Tackifiers
D7048-04 Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
D7069-04 Guide for Field Quality Assurance in a Ground-water Sampling Event
D7070-04 Test Method for Creep of Rock Core Under Constant Stress and Temperature
D7099-04 Terminology Relating to Frozen Soil and Rock
D7100-04 Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions that may Alter Hydraulic Conductivity
Volume 04.10, July 2005
Wood
D0009-87R99E01 Terminology Relating to Wood
D0025-99E01 Specification for Round Timber Piles
D0038-94R00E01 Test Methods for Sampling Wood Preservatives Prior to Testing
D0143-94R00E01 Test Methods for Small Clear Specimens of Timber
D0168-94R00 Test Method for Coke Residue of Creosote
D0198-05 Test Methods of Static Tests of Lumber in Structural Sizes
D0245-00R02E01 Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
D0246-04A Test Method for Distillation of Creosote and Creosote-Coal Tar Solutions
D0347-04 Tables for Volume and Specific Gravity Correction for Creosote, Creosote-Coal Tar Solution, and Coal Tar
D0367-94R00E01 Test Method for Xylene-Insoluble Matter in Creosote
D0368-89R02 Test Method for Specific Gravity of Creosote and Oil-Type Preservatives
D0369-84R02 Test Method for Specific Gravity of Creosote Fractions and Residue
D0370-02E01 Practice for Dehydration of Oil-Type Preservatives
D0390-92R99 Specification for Coal-Tar Creosote for the Preservative Treatment of Piles, Poles, and Timbers for Marine, Land, and Freshwater Use
D0391-94R00E01 Specification for Creosote-Coal Tar Solution
D0453-94R00E01 Test Method for Tar Acids in Creosote-Coal Tar Solutions
D1036-99R05 Test Methods of Static Tests of Wood Poles
D1037-99 Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
D1038-83R00 Terminology Relating to Veneer and Plywood
D1102-84R01 Test Method for Ash in Wood
D1105-96R01 Test Method for Preparation of Extractive-Free Wood
D1106-96R01 Test Method for Acid-Insoluble Lignin in Wood
D1107-96R01 Test Method for Ethanol-Toluene Solubility of Wood
D1108-96R01 Test Method for Dichloromethane Solubles in Wood
D1109-84R01 Test Method for 1 \% Sodium Hydroxide Solubility of Wood
D1110-84R01 Test Methods for Water Solubility of Wood
D1165-03 Nomenclature of Domestic Hardwoods and Softwoods
D1166-84R01 Test Method for Methoxyl Groups in Wood and Related Materials
D1272-56R02 Specification for Pentachlorophenol
D1274-95R00 Test Methods for Chemical Analysis of Pentachlorophenol
D1325-94R00 Specification for Ammoniacal Copper Arsenate and Ammoniacal Copper Zinc Arsenate
D1326-94R00 Test Methods for Chemical Analysis of Ammoniacal Copper Arsenate and Ammoniacal Copper Zinc Arsenate
D1413-99 Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
D1554-01E01 Terminology Relating to Wood-Base Fiber and Particle Panel Materials
D1624-71R00 Specification for Acid Copper Chromate
D1625-71R00 Specification for Chromated Copper Arsenate
D1627-94R00 Test Methods for Chemical Analysis of Acid Copper Chromate
D1628-94R00 Test Methods for Chemical Analysis of Chromated Copper Arsenate
D1666-87R04 Test Methods for Conducting Machining Tests of Wood and Wood-Base Materials
D1758-02 Test Method of Evaluating Wood Preservatives by Field Tests with Stakes
D1760-01 Specification for Pressure Treatment of Timber Products
D1761-88R00E01 Test Methods for Mechanical Fasteners in Wood
D1762-84R01 Test Method for Chemical Analysis of Wood Charcoal
D1858-63R00 Specification for Creosote-Petroleum Solution
D1859-71R00 Specification for Petroleum Used for Blending with Creosote
D1860-95R00 Test Method for Moisture and Creosote-Type Preservative in Wood
D1990-00R02E01 Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
D2017 Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods
D2085-89R02 Test Method for Determining Chloride Used in Calculating Pentachlorophenol in Solutions or Wood (Lime Ignition Method)
D2164-83R00 Methods of Testing Structural Insulating Roof Deck
D2278-02 Test Method for Field Evaluation of Wood Preservatives in Round Post-Size Specimens
D2394-83R99 Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring
D2395-02 Test Methods for Specific Gravity of Wood and Wood-Based Materials
D2481-81R02 Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens
D2555-98E01 Test Methods for Establishing Clear Wood Strength Values
D2604-86R00 Specification for High-Boiling Hydrocarbon Solvent for Preparing Oil-Borne Preservative Solutions
D2606-94R00 Test Method for Solubility of Pentachlorophenol in Heavy Hydrocarbon Solvents
D2718-00E01 Test Methods for Structural Panels in Planar Shear (Rolling Shear)
D2719-89R01E01 Test Methods for Structural Panels in Shear Through-the-Thickness
D2898-94R04 Test Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
D2899-03 Practice for Establishing Allowable Stresses for Round Timber Piles
D2915-03 Practice for Evaluating Allowable Properties for Grades of Structural Lumber
D3043-00E01 Test Methods for Structural Panels in Flexure
D3044-94R00 Test Method for Shear Modulus of Wood-Based Structural Panels
D3200-74R00 Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles
D3201-94R03 Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
D3224-02 Test Method for Water Solubility of Auxiliary Solvent for Wood Preserving Solutions
D3225-73R02E01 Specification for Low-Boiling Hydrocarbon Solvent for Oil-Borne Preservatives
D3345-74R99 Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
D3499-94R00 Test Method for Toughness of Wood-Based Structural Panels
D3500-90R03 Test Methods for Structural Panels in Tension
D3501-94R00 Test Methods for Wood-Based Structural Panels in Compression
D3507-97R00 Test Methods for Penetration of Preservatives in Wood and for Differentiating Between Heartwood and Sapwood
D3737-04 Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
D3873-01 Test Method for Valency State of the Arsenic Component of Ammoniacal Copper Zinc Arsenate Solutions
D3957-03 Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
D4064-01 Practice for Preservative Treatment of Utility Poles by the Thermal Process
D4278-02 Practice for Wet Ashing Procedure for Preparing Wood Samples for Inorganic Chemical Analysis
D4442-92R03 Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
D4444-92R03 Test Methods for Use and Calibration of Hand-Held Moisture Meters
D4445-03 Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
D4761-05 Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
D4933-99R04 Guide for Moisture Conditioning of Wood and Wood-Based Materials
D5055-04 Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
D5124-96R01 Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation
D5456-05 Specification for Evaluation of Structural Composite Lumber Products
D5457-04A Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
D5516-03 Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
D5536-94R04 Practice for Sampling Forest Trees for Determination of Clear Wood Properties
D5582-00 Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator
D5583-00 Test Method for Detection and Estimation of Retention of Wood Preservatives by Aspergillus Bioassaying
D5584-94R00 Test Methods for Chemical Analysis of Ammoniacal Copper Quat, Type B (ACQ-B)
D5651-95AR02 Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
D5652-95R00 Test Methods for Bolted Connections in Wood and Wood-Based Products
D5653-95R00 Specification for Copper Dimethyldithiocarbamate
D5654-95R00 Specification for Ammoniacal Copper Quat Type B (ACQ-B) 1
D5655-95R00 Test Method for Analysis of Copper Dimethyldithiocarbamate (CDDC) Treated Wood by Colorimetry 1
D5664-02 Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
D5764-97AR02 Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products
D5933-96R01 Specification for 2-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions
D6007-02 Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
D6305-02E01 Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
D6513-00 Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Endurance Tests
D6555-03 Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies
D6570-04 Practice for Assigning Allowable Properties for Mechanically Graded Lumber
D6643-01 Test Method for Testing Wood-Base Panel Corner Impact Resistance
D6782-04 Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
D6815-02A Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
D6841-03 Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber
D6874-03 Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration
D6958-03 Test Methods for Evaluating Side-Bonding Potential of Wood Coatings
D7031-04 Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
D7032-05 Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)
D7147-05 Specification for Testing and Establishing Allowable Loads of Joist Hangers
E0069-02 Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus
E1333-96R02 Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
Volume 04.11, November 2005
Building Constructions (I): E 72 - E 1670
E0072-05 Test Methods of Conducting Strength Tests of Panels for Building Construction
E0073-83R02 Practice for Static Load Testing of Truss Assemblies
E0154-99 Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
E0196-95R00E01 Practice for Gravity Load Testing of Floors and Low Slope Roofs
E0241-04 Guide for Limiting Water-Induced Damage to Buildings
E0283-04 Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E0330-02 Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
E0331-00 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
E0405-04 Test Methods for Wear Testing Rotary Operators for Windows
E0455-04 Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
E0488-96R03 Test Methods for Strength of Anchors in Concrete and Masonry Elements
E0489 Test Method for Tensile Strength Properties of Metal Connector Plates
E0529-04 Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
E0546-88R99E01 Test Method for Frost Point of Sealed Insulating Glass Units
E0547-00 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
E0564-00E01 Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
E0575-99 Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
E0576-88R99E01 Test Method for Frost Point of Sealed Insulating Glass Units in the Vertical Position
E0577-85R02 Guide for Dimensional Coordination of Rectilinear Building Parts and Systems
E0605-93R00 Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E0621-94R99E01 Practice for Use of Metric (SI) Units in Building Design and Construction(Committee E-6 Supplement to E380)
E0631-93AR98E01 Terminology of Building Constructions
E0661-03 Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
E0695-03 Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
E0713-88R02 Guide for Selection of Scales for Metric Building Drawings
E0736-00 Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
E0741-00 Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
E0754-80R00E01 Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
E0759-92R05 Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
E0760-92R05 Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
E0761-92R05 Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
E0767 Test Method for Shear Strength Properties of Metal Connector Plates
E0773-01 Test Method for Accelerated Weathering of Sealed Insulating Glass Units
E0774-97 Specification for the Classification of the Durability of Sealed Insulating Glass Units
E0779-03 Test Method for Determining Air Leakage Rate by Fan Pressurization
E0783-02 Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
E0833-04 Terminology of Building Economics
E0835_E0835M-93R02 Guide for Modular Coordination of Clay and Concrete Masonry Units
E0859-93R00 Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
E0864-03 Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E0865-03 Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
E0866-05 Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E0874-04 Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
E0894-88R04 Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
E0917-02 Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
E0935-00E01 Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
E0936-98R04 Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing
E0937-93R05 Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E0964-02 Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
E0985-00E01 Specification for Permanent Metal Railing Systems and Rails for Buildings
E0987-88R01 Test Methods for Deglazing Force of Fenestration Products
E0990-04 Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels
E0997-01 Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods
E0998-84R99 Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
E1017 Specification for Generic Performance Requirements for Exterior Residential Window Assemblies
E1057-04 Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
E1074-04 Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
E1091-03 Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
E1105-00 Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
E1121-02 Practice for Measuring Payback for Investments in Buildings and Building Systems
E1155-96R01 Test Method for Determining F Floor Flatness and F Floor Levelness Numbers
E1155M-96R01 Test Method for Determining F Floor Flatness and F Floor Levelness Numbers \[Metric\]
E1185-02 Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
E1186-03 Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
E1190-95R00E01 Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
E1233-00 Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Cyclic Air Pressure Differential
E1258-88R03 Test Method for Airflow Calibration of Fan Pressurization Devices
E1300-04E01 Practice for Determining Load Resistance of Glass in Buildings
E1307-05 Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
E1334-95R05 Practice for Rating the Serviceability of a Building or Building-Related Facility
E1368-05 Practice for Visual Inspection of Asbestos Abatement Projects
E1369-02 Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
E1399-97R05 Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
E1410-91R05 Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings
E1423-99 Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
E1424-91R00 Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
E1425-91R99 Practice for Determining the Acoustical Performance of Exterior Windows and Doors
E1464-92R05 Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities
E1480-92R04 Terminology of Facility Management (Building-Related)
E1481-00A Terminology of Railing Systems and Rails for Buildings
E1486-98R04 Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
E1486M-98R04 Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria \[Metric\]
E1494-92R02 Practice for Encapsulants for Spray- or Trowel-Applied Friable Asbestos-Containing Building Materials
E1509-04 Specification for Room Heaters, Pellet Fuel-Burning Type
E1512-01 Test Methods for Testing Bond Performance of Bonded Anchors
E1513-93R05E01 Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
E1514-98R03 Specification for Structural Standing Seam Steel Roof Panel Systems
E1554-03 Test Methods for Determining External Air Leakage of Air Distribution Systems by Fan Pressurization
E1555-03 Specification for Structural Paste Adhesive for Sandwich Panel Repair
E1556-03 Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
E1557-05 Classification for Building Elements and Related Sitework\MUNIFORMAT II
E1592-05 Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
E1602-03 Guide for Construction of Solid Fuel Burning Masonry Heaters
E1605-04 Terminology Relating to Lead in Buildings
E1612-94R05 Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
E1613-04 Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry
(GFAAS) Techniques
E1637-98R03 Specification for Structural Standing Seam Aluminum Roof Panel Systems
E1643-98 Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
E1644-04 Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
E1645-01 Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
E1646-95R03 Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
E1660-95AR05 Classification for Serviceability of an Office Facility for Support for Office Work
E1661-95AR05 Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
E1662-95AR05 Classification for Serviceability of an Office Facility for Sound and Visual Environment
E1663-03 Classification for Serviceability of an Office Facility for Typical Office Information Technology
E1664-95AR05 Classification for Serviceability of an Office Facility for Layout and Building Factors
E1665-95AR05 Classification for Serviceability of an Office Facility for Facility Protection
E1666-95AR05 Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
E1667-95AR05 Classification for Serviceability of an Office Facility for Image to the Public and Occupants
E1668-95AR05 Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
E1669-95AR05 Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
E1670-95AR05 Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
Volume 04.12, November 2005
Building Constructions (II): E 1671 - latest; Property Management Systems; Technology and Underground Utilities
E1671-95AR05 Classification for Serviceability of an Office Facility for Cleanliness
E1677-95R00 Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls
E1679-95R05 Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
E1680-95R03 Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
E1692-95AR05 Classification for Serviceability of an Office Facility for Change and Churn by Occupants
E1693-95R05 Classification for Serviceability of an Office Facility for Protection of Occupant Assets
E1694-95AR05 Classification for Serviceability of an Office Facility for Special Facilities and Technologies
E1699-00 Practice for Performing Value Analysis (VA) of Buildings and Building Systems,
E1700-95R05 Classification for Serviceability of an Office Facility for Structure and Building Envelope
E1701-95R05 Classification for Serviceability of an Office Facility for Manageability
E1726-01 Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
E1727-05 Practice for Field Collection of Soil Samples for Subsequent Lead Determination
E1728-03 Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
E1729-05 Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
E1730-04 Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
E1741-00 Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry
E1745-97R04 Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
E1748-95R01 Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
E1749-00 Terminology Relating to Rigid Wall Relocatable Shelters
E1753-04 Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
E1765-02 Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
E1773-05 Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
E1775-01 Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
E1783-96R05 Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
E1792-03 Specification for Wipe Sampling Materials for Lead in Surface Dust
E1793-00 Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
E1794-03 Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200|SDF Elevated Humidity Service), Type II Panels
E1795-04 Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1796-03 Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1797-04 Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1800-03 Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160|SDF Elevated Humidity Service), Type I Panels
E1801-03 Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
E1803-99 Test Methods for Determining Structural Capacities of Insulated Panels
E1804-02 Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
E1807 Terminology Pertaining to Metal Connector Plates
E1825-96R03 Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
E1826-05 Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
E1827-96R02 Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
E1828-01 Practice for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint
E1836-01 Classification for Building Floor Area Measurements for Facility Management
E1851-04 Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
E1857-97R04 Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
E1864-02 Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures
E1886-05 Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
E1887-97 Test Method for Fog Determination
E1908-03 Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
E1925-04 Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures
E1946-02 Practice for Measuring Cost Risk of Buildings and Building Systems
E1971-05 Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
E1973 Practice for Collection of Surface Dust by Air Sampling Pump Vacuum Technique for Subsequent Lead Determination
E1974-01A Specification for Shelter, Electrical, Equipment S-250/G
E1975-01A Specification for Shelter, Electrical, Equipment S-280/G
E1976-05 Specification for Shelter, Tactical, Nonexpandable
E1977-05 Specification for Shelter, Tactical, Expandable, One-Side
E1978-05 Specification for Shelter, Tactical, Expandable, Two-Side
E1979-04 Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
E1991-05 Guide for Environmental Life Cycle Assessment (LCA) of Building Materials/Products
E1993-98R02 Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
E1996-05 Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
E1998-02 Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
E2004-04 Test Method for Facing Cleavage of Sandwich Panels
E2013-99 Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
E2025-99 Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies
E2026-99 Guide for the Estimation of Building Damageability in Earthquakes
E2029-99R04 Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
E2051-01 Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis
E2052-99 Guide for Evaluation, Management, and Control of Lead Hazards in Facilities
E2068-00 Test Method for Determination of Operating Force of Sliding Windows and Doors
E2083-05 Classification for Building Construction Field Requirements, and Office Overhead & Profit
E2094-02 Practice for Evaluating the Service Life of Chromogenic Glazings
E2098-00 Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
E2099-00 Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
E2103-00 Classification for Bridge Elements and Related Approach Work
E2110-03 Terminology for Exterior Insulation and Finish Systems (EIFS)
E2112-01 Practice for Installation of Exterior Windows, Doors and Skylights
E2114-05A Terminology for Sustainability Relative to the Performance of Buildings
E2115-05 Guide for Conducting Lead Hazard Assessments of Dwellings and Other Facilities Frequented by Children
E2119-00 Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
E2120-00 Practice for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
E2121-03 Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
E2126-05 Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings
E2127-01A Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
E2128-01A Guide for Evaluating Water Leakage of Building Walls
E2129-03 Practice for Data Collection for Sustainability Assessment of Building Products
E2131-01 Practice for Assessing Loss, Damage, or Destruction of Property
E2132-01 Practice for Physical Inventory of Durable, Moveable Property
E2134-01 Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
E2135-04 Terminology for Property and Asset Management
E2136-04 Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings\MDurability
E2140-01 Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
E2141-02 Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2150-04 Classification for Life-Cycle Environmental Work Elements\MEnvironmental Cost Element Structure
E2151-02 Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings
E2156-04 Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings
E2166-01 Practice for Organizing and Managing Building Data
E2167-01 Guide for Selection and Use of Stone Consolidants
E2168-01 Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
E2174-04 Practice for On-Site Inspection of Installed Fire Stops
E2178-03 Test Method for Air Permeance of Building Materials
E2188-02 Test Method for Insulating Glass Unit Performance
E2189-02 Test Method for Testing Resistance to Fogging in Insulating Glass Units
E2190-02 Specification for Insulating Glass Unit Performance and Evaluation
E2203-02 Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
E2204-05 Guide for Summarizing the Economic Impacts of Building-Related Projects
E2219-02 Practice for Valuation and Management of Moveable, Durable Property
E2220-02 Practice for Establishing the Full Valuation of the Loss/Overage Population Identified During the Inventory of Moveable, Durable Property
E2221-02 Practice for Administrative Control of Property
E2239-04 Practice for Record Keeping and Record Preservation for Lead Hazard Activities
E2240-02 Test Method for Assessing the Current-Voltage Cycling Stability at 90|SDC (194|SDF) of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2241-02 Test Method for Assessing the Current-Voltage Cycling Stability at Room Temperature of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2252-04 Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
E2255-04 Practice for Conducting Visual Assessments for Lead Hazards in Buildings
E2260-03 Guide for Repointing (Tuckpointing) Historic Masonry
E2264-05 Practice for Determining the Effects of Temperature Cycling on Fenestration Products
E2265-05A Terminology for Anchors and Fasteners in Concrete and Masonry
E2266-04 Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
E2267-04 Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings\MIndoor Air Quality
E2268-04 Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
E2269-05 Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
E2270-05 Practice for Periodic Inspection of Building Facades for Unsafe Conditions
E2271-05 Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and Other Child-Occupied Facilities
E2273-03 Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
E2279-03 Practice for Establishing the Guiding Principles of Property Management
E2306-03 Practice for Utilization and Disposal of Personal Property
E2319-04 Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E2320-04 Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
E2321-03 Practice for Use of Test Methods E 96 for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
E2322-03 Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
E2323-04 Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer
E2342-03 Test Method for Durability Testing of Duct Sealants
E2351-04A Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings\MFunctionality
E2353-04 Test Methods for Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
E2354-04 Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units
E2355-04 Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface
E2356-04 Practice for Comprehensive Building Asbestos Surveys
E2358-04 Specification for the Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
E2377-04 Specification for Shelter, Electrical Equipment, Lightweight
E2378-05 Practice for the Recognition of Impaired or Retired Personal Property
E2379-04 Practice for Property Management for Career Development and Training
E2392-05 Guide for Design of Earthen Wall Building Systems
E2393-04 Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
E2394-04 Practice for Maintenance, Renovation and Repair of Installed Asbestos Cement Products
E2396-05 Test Method for Saturated Water Permeability of Granular Drainage Media \[Falling-Head Method\] for Green Roof Systems
E2397-05 Practice for Determination of Dead Loads and Live Loads associated with Green Roof Systems
E2398-05 Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Green Roof Systems
E2399-05 Test Method for Maximum Media Density for Dead Load Analysis of Green Roof Systems
E2430-05 Specification For Expanded Polystyrene (|P`EPS|P') Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (|P`EIFS|P')
E2452-05 Practice for Equipment Management Process Maturity (EMPM) Model
E2453-05 Practice for Determining the Life-Cycle Cost of Ownership of Personal Property
F0588-04 Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
F0842-04 Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
F2233-03 Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers
F2303-03 Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits
F2304-03 Practice for Rehabilitation of Sewers Using Chemical Grouting
F2349-04 Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems
F2350-04 Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems
F2414-04 Practice for Sealing Sewer Manholes Using Chemical Grouting
F2454-05 Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting
F2462-05 Practice for Operation and Maintenance of Sewers with Optical Fiber Systems
PS138-03 Provisional Standard Specification for Shelter, Electrical Equipment, Lightweight
Volume 04.13, May 2005
Geosynthetics
D1987-95R02 Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters
D4354-99R04 Practice for Sampling of Geosynthetics for Testing
D4355-02 Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
D4437-99 Practice for Determining the Integrity of Field Seams Used in Joining Flexible Polymeric Sheet Geomembranes
D4439-04 Terminology for Geosynthetics
D4491-99AR04 Test Methods for Water Permeability of Geotextiles by Permittivity
D4533-04 Test Method for Trapezoid Tearing Strength of Geotextiles
D4545-86R99 Practice for Determining the Integrity of Factory Seams Used in Joining Manufactured Flexible Sheet Geomembranes
D4594-96R03 Test Method for Effects of Temperature on Stability of Geotextiles
D4595-86R01 Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
D4632-91R03 Test Method for Grab Breaking Load and Elongation of Geotextiles
D4716-04 Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
D4751-04 Test Method for Determining Apparent Opening Size of a Geotextile
D4759-02 Practice for Determining the Specification Conformance of Geosynthetics
D4833-00E01 Test Method for Index Puncture Resistance of Geotextiles, Geomembranes, and Related Products
D4873-02 Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples
D4884-96R03 Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
D4885-01 Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
D4886-88R02 Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)
D5101-01 Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio
D5141-96R04 Test Method for Determining Filtering Efficiency and Flow Rate of a Geotextile for Silt Fence Application Using Site-Specific Soil
D5199-01 Test Method for Measuring the Nominal Thickness of Geosynthetics
D5261-92R03 Test Method for Measuring Mass per Unit Area of Geotextiles
D5262-04 Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics
D5321-02 Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method
D5322-98R03 Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
D5323-92R99 Practice for Determination of 2\t\% Secant Modulus for Polyethylene Geomembranes
D5397-99 Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
D5493-93R03 Test Method for Permittivity of Geotextiles Under Load
D5494-93R99E01 Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
D5496-98R03 Practice for In Field Immersion Testing of Geosynthetics
D5514-94R01 Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
D5567-94R01 Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
D5596-03 Test Method For Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
D5617-04 Test Method for Multi-Axial Tension Test for Geosynthetics
D5641-94R01E01 Practice for Geomembrane Seam Evaluation by Vacuum Chamber
D5721-95R02 Practice for Air-Oven Aging of Polyolefin Geomembranes
D5747-95AR02 Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
D5818-95R00 Practice for Obtaining Samples of Geosynthetics from a Test Section for Assessment of Installation Damage
D5819-99 Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
D5820-95R01E01 Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes
D5884-04A Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
D5885-04 Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
D5886-95R01 Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
D5887-04 Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
D5888-95R02E01 Guide for Storage and Handling of Geosynthetic Clay Liners
D5889-97R03 Practice for Quality Control of Geosynthetic Clay Liners
D5890-02 Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
D5891-02 Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners
D5970-96R02 Practice for Deterioration of Geotextiles from Outdoor Exposure
D5993-99R04 Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners
D5994-98R03 Test Method for Measuring Core Thickness of Textured Geomembrane
D6072-96R02 Guide for Obtaining Samples of Geosynthetic Clay Liners
D6088-97R02 Practice for Installation of Geocomposite Pavement Drains
D6102-04 Guide for Installation of Geosynthetic Clay Liners
D6140-00 Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
D6141-97R04 Guide for Screening Clay Portion of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids
D6213-97R03 Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
D6214-98R03 Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods
D6241-04 Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
D6243-98 Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
D6244-98R04 Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
D6364-99R04 Test Method for Determining Short-Term Compression Behavior of Geosynthetics
D6365-99 Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test
D6388-99 Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
D6389-99 Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
D6392-99 Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
D6434-04 Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes
D6454-99 Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
D6455-99 Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
D6495-02 Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners
D6496-04A Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
D6497-02 Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures
D6523-00 Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills
D6524-00 Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
D6525-00 Test Method for Measuring Nominal Thickness of Permanent Rolled Erosion Control Products
D6566-00 Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
D6567-00 Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)
D6574-00 Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
D6575-00 Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRM's)
D6636-01 Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
D6637-01 Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
D6638-01 Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
D6693-04 Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
D6706-01 Test Method for Measuring Geosynthetic Pullout Resistance in Soil
D6707-01 Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
D6747-04 Guide for Selection of Techniques for Electrical Detection of Potential Leak Paths in Geomembranes
D6766-02 Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids
D6767-02 Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
D6768-04 Test Method for Tensile Strength of Geosynthetic Clay Liners
D6817-04 Specification for Rigid Cellular Polystyrene Geofoam
D6818-02 Test Method for Ultimate Tensile Properties of Turf Reinforcement Mats
D6826-02A Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
D6916-03 Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
D6917-03 Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
D6918-03 Test Method for Testing Vertical Strip Drains in the Crimped Condition
D6992-03 Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
D7001-04 Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
D7002-03 Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System
D7003-03 Test Method for Strip Tensile Properties of Reinforced Geomembranes
D7004-03 Test Method for Grab Tensile Properties of Reinforced Geomembranes
D7005-03 Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
D7006-03 Practice for Ultrasonic Testing of Geomembranes
D7007-03 Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials
D7008-03 Specification for Geosynthetic Alternate Daily Covers
D7056-04 Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
Section 05 - Petroleum Products, Lubricants, and Fossil Fuels
Volume 05.01, January 2005
Petroleum Products and Lubricants (I): D 56 - D 3230
D0056-02A Test Method for Flash Point by Tag Closed Cup Tester
D0061-75R04 Test Method for Softening Point of Pitches (Cube-in-Water Method)
D0071-94R04 Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
D0086-04B Test Method for Distillation of Petroleum Products at Atmospheric Pressure
D0087-04 Test Method for Melting Point of Petroleum Wax (Cooling Curve)
D0091-02 Test Method for Precipitation Number of Lubricating Oils
D0092-02B Test Method for Flash and Fire Points by Cleveland Open Cup Tester
D0093-02A Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
D0094-02 Test Methods for Saponification Number of Petroleum Products
D0095-99E01 Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
D0097-04 Test Method for Pour Point of Petroleum Products
D0127-87R04 Test Method for Drop Melting Point of Petroleum Wax Including Petrolatum
D0128-98R03E01 Test Methods for Analysis of Lubricating Grease
D0129-00 Test Method for Sulfur in Petroleum Products (General Bomb Method)
D0130-04 Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
D0156-02 Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
D0187-94R03E01 Test Method for Burning Quality of Kerosine
D0189-01 Test Method for Conradson Carbon Residue of Petroleum Products
D0217-02 Test Methods for Cone Penetration of Lubricating Grease
D0240-02 Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
D0287-92R00E01 Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
D0322-97R02E01 Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
D0323-99A Test Method for Vapor Pressure of Petroleum Products (Reid Method)
D0341-03 Test Method for Viscosity-Temperature Charts for Liquid Petroleum Products
D0381-04 Test Method for Gum Content in Fuels by Jet Evaporation
D0396-04 Specification for Fuel Oils
D0445-04E01 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
D0446-04 Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
D0473-02 Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
D0482-03 Test Method for Ash from Petroleum Products
D0483-00 Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
D0524-04 Test Method for Ramsbottom Carbon Residue of Petroleum Products
D0525-01 Test Method for Oxidation Stability of Gasoline (Induction Period Method)
D0565-99 Test Method for Carbonizable Substances in White Mineral Oil
D0566-02 Test Method for Dropping Point of Lubricating Grease
D0611-04 Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
D0612-88R04 Test Method for Carbonizable Substances in Paraffin Wax
D0664-04E01 Test Method for Acid Number of Petroleum Products by Potentiometric Titration
D0665-03 Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
D0721-04 Test Method for Oil Content of Petroleum Waxes
D0808-00 Test Method for Chlorine in New and Used Petroleum Products (Bomb Method)
D0873-02 Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
D0874-00 Test Method for Sulfated Ash from Lubricating Oils and Additives
D0892-03 Test Method for Foaming Characteristics of Lubricating Oils
D0893-97R02E01 Test Method for Insolubles\t In\t Used\t Lubricating\t Oils
D0910-04A Specification for Aviation Gasolines
D0937-04 Test Method for Cone Penetration of Petrolatum
D0938-04 Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum
D0942-02 Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
D0943-04A Test Method for Oxidation Characteristics of Inhibited Mineral Oils
D0972-02 Test Method for Evaporation Loss of Lubricating Greases and Oils
D0974-04 Test Method for Acid and Base Number by Color-Indicator Titration
D0975-04C Specification for Diesel Fuel Oils
D0976-04A Test Method for Calculated Cetane Index of Distillate Fuels
D1015-99R04 Test Method for Freezing Points of High-Purity Hydrocarbons
D1016-99R04E01 Test Method for Purity of Hydrocarbons from Freezing Points
D1018-00 Test Method for Hydrogen In Petroleum Fractions
D1025-00R04 Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene
D1091-00 Test Methods for Phosphorus in Lubricating Oils and Additives
D1092-99 Test Method for Measuring Apparent Viscosity of Lubricating Greases
D1093-98 Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
D1094-00 Test Method for Water Reaction of Aviation Fuels
D1157-91R04 Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons
D1159-01 Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
D1160-03 Test Method for Distillation of Petroleum Products at Reduced Pressure
D1217-93R03E01 Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
D1218-02 Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
D1250-04 Guide for Use of the Petroleum Measurement Tables
D1263-94R99 Test Method for Leakage Tendencies of Automotive Wheel Bearing Greases
D1264-03E01 Test Method for Determining the Water Washout Characteristics of Lubricating Greases
D1265-04A Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
D1266-98R03E01 Test Method for Sulfur in Petroleum Products (Lamp Method)
D1267-02 Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
D1298-99E02 Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
D1318-00 Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
D1319-03 Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
D1321-04 Test Method for Needle Penetration of Petroleum Waxes
D1322-97R02E01 Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
D1367-96R01 Test Method for Lubricating Qualities of Graphites
D1401-02 Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
D1403-02 Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
D1404_D1404M-99R03 Test Method for Estimation of Deleterious Particles in Lubricating Grease
D1405-01 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
D1465-04 Test Method for Blocking and Picking Points of Petroleum Wax
D1478-02 Test Method for Low-Temperature Torque of Ball Bearing Grease
D1480-02 Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
D1481-02 Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
D1500-04A Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
D1550-94R00 ASTM Butadiene Measurement Tables
D1552-03 Test Method for Sulfur in Petroleum Products (High-Temperature Method)
D1655-04A Specification for Aviation Turbine Fuels
D1657-02 Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
D1662-92R02 Test Method for Active Sulfur in Cutting Oils
D1740-01 Test Method for Luminometer Numbers of Aviation Turbine Fuels
D1742-94R00E01 Test Method for Oil Separation from Lubricating Grease During Storage
D1743-01 Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
D1747-99R04E01 Test Method for Refractive Index of Viscous Materials
D1748-02 Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
D1796-97R02 Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
D1831-00E01 Test Method for Roll Stability of Lubricating Grease
D1832-04 Test Method for Peroxide Number of Petroleum Wax
D1833-87R04 Test Method for Odor of Petroleum Wax
D1834 Test Method for 20|SD Specular Gloss of Waxed Paper
D1835-03A Specification for Liquefied Petroleum (LP) Gases
D1837-02A Test Method for Volatility of Liquefied Petroleum (LP) Gases
D1838-03 Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
D1839-91R00E01 Test Method for Amyl Nitrate in Diesel Fuels
D1840-03 Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
D2001-92R02 Test Method for Depentanization of Gasoline and Naphthas
D2007-03 Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
D2008-91R01 Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
D2068-04 Test Method for Filter Plugging Tendency of Distillate Fuel Oils
D2069 Specification for Marine Fuels
D2070-91R01 Test Method for Thermal Stability of Hydraulic Oils
D2156-94R03 Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
D2157-94R03 Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels
D2158-04 Test Method for Residues in Liquefied Petroleum (LP) Gases
D2161-93R99E02 Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
D2162-99R04 Test Method for Basic Calibration of Master Viscometers and Viscosity Oil Standards
D2163-91R96 Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography
D2265-00 Test Method for Dropping Point of Lubricating Grease Over WideTemperature Range
D2266-01 Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
D2268-93R03E01 Test Method for Analysis of High-Purity -Heptane and octane by Capillary Gas Chromatography
D2269-99 Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
D2270-04 Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 and 100|SDC
D2271 Test Method for Preliminary Examination of Hydraulic Fluids (Wear Test)
D2272-02 Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
D2273-97R02E02 Test Method for Trace Sediment in Lubricating Oils
D2274-03A Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
D2276-00 Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
D2318-98R03 Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
D2319-98R03 Test Method for Softening Point of Pitch (Cube-in-Air Method)
D2320-98R03 Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
D2384-83R04 Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures
D2386-03 Test Method for Freezing Point of Aviation Fuels
D2392-96R01E01 Test Method for Color Of Dyed Aviation Gasolines
D2415-98R03 Test Method for Ash in Coal Tar and Pitch
D2416-84R04 Test Method for Coking Value of Tar and Pitch (Modified Conradson)
D2420-91R01 Test Method for Hydrogen Sulfide In Liquefied Petroleum (LP) Gases (Lead Acetate Method)
D2421-02 Practice for Interconversion of Analysis of C and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
D2422-97R02 Classification of Industrial Fluid Lubricants by Viscosity System
D2423-90R02 Test Method for Surface Wax on Waxed Paper or Paperboard
D2425-04 Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
D2426-93R04E01 Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
D2427-92R01 Test Method for Determination of C through C Hydrocarbons in Gasolines by Gas Chromatography
D2500-02E01 Test Method for Cloud Point of Petroleum Products
D2501-91R00 Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
D2502-04 Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
D2503-92R02E01 Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
D2504-88R04E01 Test Method for Noncondensable Gases in C and Lighter Hydrocarbon Products by Gas Chromatography
D2505-88R04E01 Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
D2509-03 Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)
D2510-94R98 Test Method for Adhesion of Solid Film Lubricants
D2511-93R03 Test Method for Thermal Shock Sensitivity of Solid Film Lubricants
D2532-03 Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
D2533-99 Test Method for Vapor-Liquid Ratio of Spark-Ignition Engine Fuels
D2534-88R04 Test Method for Coefficient of Kinetic Friction for Wax Coatings
D2549-02 Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
D2569-97R02 Test Method for Distillation of Pitch
D2593-93R04E01 Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
D2595-96R02E01 Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
D2596-97R02E01 Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
D2597-94R04 Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography
D2598-02 Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
D2603-01 Test Method for Sonic Shear Stability of Polymer-Containing Oils
D2619-95R02E01 Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
D2622-03 Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
D2624-02 Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
D2625-94R03 Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
D2638-91R02 Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
D2649-04 Test Method for Corrosion Characteristics of Solid Film Lubricants
D2650-04 Test Method for Chemical Composition of Gases By Mass Spectrometry
D2669 Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)
D2670-95R04 Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
D2709-96R01E01 Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
D2710-99R04E01 Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
D2711-01A Test Method for Demulsibility Characteristics of Lubricating Oils
D2712-91R03E01 Test Method for Hydrocarbon Traces in Propylene Concentrates by Gas Chromatography
D2713-91R01 Test Method for Dryness of Propane (Valve Freeze Method)
D2714-94R03 Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
D2715-92R02 Test Method for Volatilization Rates of Lubricants in Vacuum
D2717-95R00 Test Method for Thermal Conductivity of Liquids
D2764-99R04E01 Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
D2766-95R00 Test Method for Specific Heat of Liquids and Solids
D2779-92R02 Test Method for Estimation of Solubility of Gases in Petroleum Liquids
D2780-92R02E01 Test Method for Solubility of Fixed Gases in Liquids
D2782-02 Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
D2783-03 Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
D2784-98R03E01 Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
D2786-91R01E01 Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
D2789-95R00E01 Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry
D2878-95R00E01 Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
D2879-97R02E01 Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
D2880-03 Specification for Gas Turbine Fuel Oils
D2881-03 Classification for Metal Working Fluids and Related Materials
D2882 Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in Constant Volume Vane Pump
D2883-95R00E01 Test Method for Reaction Threshold Temperature of Liquid and Solid Materials
D2884-93R02 Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method
D2887-04A Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
D2889-95R00 Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
D2890-92R03 Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
D2892-03A Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
D2893-04 Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
D2895 Test Method for Gloss Retention of Waxed Paper and Paperboard After Storage at 40|SDC (104|SDF)
D2896-03 Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
D2962-97R02 Test Method for Calculating Volume-Temperature Correction For Coal-Tar Pitches
D2981-94R03 Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
D2982-98E01 Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
D2983-04A Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
D3104-99 Test Method for Softening Point of Pitches (Mettler Softening Point Method)
D3115-95R00 Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
D3117-03 Test Method for Wax Appearance Point of Distillate Fuels
D3120-03A Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
D3227-04A Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
D3228-03 Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
D3230-99R04 Test Method for Salts in Crude Oil (Electrometric Method)
Volume 05.02, March 2005
Petroleum Products and Lubricants (II): D 3231 - D 5302
D3231-02 Test Method for Phosphorus in Gasoline
D3233-93R03 Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)
D3234 Test Method for Abrasion Resistance of Petroleum Wax Coatings
D3235-04 Test Method for Solvent Extractables in Petroleum Waxes
D3236-88R04 Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
D3237-02 Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
D3238-95R00E01 Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
D3239-91R01 Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
D3240-91R01 Test Method for Undissolved Water In Aviation Turbine Fuels
D3241-04 Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
D3242-01 Test Method for Acidity in Aviation Turbine Fuel
D3244-97R02 Practice for Utilization of Test Data to Determine Conformance with Specifications
D3245-03 Test Method for Pumpability of Industrial Fuel Oils
D3246-96 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
D3336-97R02E01 Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
D3338-04 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
D3339-04 Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
D3340-98R03 Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer
D3341-00 Test Method for Lead in Gasoline\MIodine Monochloride Method
D3342-90R00E01 Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water
D3343-95R00 Test Method for Estimation of Hydrogen Content of Aviation Fuels
D3344-90R00E01 Test Method for Total Wax \tContent \tof \tCorrugated \tPaperboard
D3348-98R03E01 Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)
D3427-03 Test Method for Air Release Properties of Petroleum Oils
D3429-93R02E01 Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
D3461-97R02 Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)
D3519-88R02 Test Method for Foam in Aqueous Media (Blender Test)
D3520-04 Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method)
D3521-86R02 Test Method for Surface Wax Coating On Corrugated Board
D3522-86R02E01 Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing
D3523-92R02 Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
D3524-04 Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
D3525-04 Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
D3527-02 Test Method for Life Performance of Automotive Wheel Bearing Grease
D3601-88R02E01 Test Method for Foam In Aqueous Media (Bottle Test)
D3603-93R02 Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)
D3605-00 Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
D3606-04A Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
D3607-97R02E01 Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping
D3699-04 Specification for Kerosine
D3700-01 Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
D3701-01 Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
D3702-94R04 Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
D3703-99R04 Test Method for Peroxide Number of Aviation Turbine Fuels
D3704-96R01 Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
D3705-86R03E01 Test Method for Misting Properties of Lubricating Fluids
D3706 Test Method for Hot Tack of Wax-Polymer Blends by the Flat Spring Test
D3707-89R99 Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method
D3708-88R00 Test Method for Weight of Wax Applied During Curtain Coating Operation
D3709-89R99 Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions
D3710-95R04 Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography
D3711-95R00E01 Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors
D3712-91R00E01 Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
D3764-01 Practice for Validation of Process Stream Analyzer Systems
D3825-90R00 Test Method for Dynamic Surface Tension by the Fast-Bubble Technique
D3827-92R02 Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
D3828-02 Test Methods for Flash Point by Small Scale Closed Cup Tester
D3829-02 Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
D3831-01 Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
D3944-88R00 Test Method for Solidification Point of Petroleum Wax
D3948-04 Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
D4006-81R00E01 Test Method for Water in Crude Oil by Distillation
D4007-02 Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
D4042-93R03E01 Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils
D4045-04 Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
D4046-91R00E01 Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
D4047-00 Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
D4048-02 Test Method for Detection of Copper Corrosion from Lubricating Grease
D4049-99R04 Test Method for Determining the Resistance of Lubricating Grease to Water Spray
D4051-99R04 Practice for Preparation of Low-Pressure Gas Blends
D4052-96R02E01 Test Method for Density and Relative Density of Liquids by Digital Density Meter
D4053-04 Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
D4054-93R03 Practice for Evaluating the Compatibility of Additives with Aviation-Turbine Fuels and Aircraft Fuel System Materials
D4055-04 Test Method for Pentane Insolubles by Membrane Filtration
D4056-01 Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
D4057-95R00 Practice for Manual Sampling of Petroleum and Petroleum Products
D4072-98R03E01 Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
D4170-97R02E01 Test Method for Fretting Wear Protection by Lubricating Greases
D4171-03 Specification for Fuel System Icing Inhibitors
D4172-94R04 Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
D4174-89R99 Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
D4175-02AE02 Terminology Relating to Petroleum, Petroleum Products, and Lubricants
D4176-04 Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
D4177-95R00 Practice for Automatic Sampling of Petroleum and Petroleum Products
D4178-82R99 Practice for Calibrating Moisture Analyzers
D4241-98R03 Practice for Design of Gas Turbine Generator Lubricating Oil Systems
D4248-98R03 Practice for Design of Steam Turbine Generator Oil Systems
D4289-03 Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
D4290-02 Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
D4291-04 Test Method for Trace Ethylene Glycol in Used Engine Oil
D4292-92R02E01 Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
D4293-83R03 Specification for Phosphate Ester Based Fluids for Turbine Lubrication
D4294-03 Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence Spectrometry
D4296-83R04 Practice for Sampling Pitch
D4304-00 Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines
D4305-98AR04E01 Test Method for Filter Flow of Aviation Fuels at Low Temperatures
D4306-01 Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
D4307-99R04 Practice for Preparation of Liquid Blends for Use as Analytical Standards
D4308-95R00E01 Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
D4310-03 Test Method for Determination of the Sludging and Corrosion Tendencies of Inhibited Mineral Oils
D4312-95AR00E01 Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
D4377-00E01 Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
D4378-03 Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines
D4418-00 Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
D4419-90R00 Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
D4420 Test Method for Determination of Aromatics in Finished Gasoline by Gas Chromatography
D4421 Test Method for Volatile Matter in Petroleum Coke
D4422-03 Test Method for Ash in Analysis of Petroleum Coke
D4423-00 Test Method for Determination of Carbonyls In C Hydrocarbons
D4424-90R01E01 Test Method for Butylene Analysis by Gas Chromatography
D4425-97R02 Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method)
D4485-04 Specification for Performance of Engine Oils
D4486-91R01 Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
D4529-01 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
D4530-03 Test Method for Determination of Carbon Residue (Micro Method)
D4539-03E01 Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
D4616-95R00 Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
D4624 Test Method for Measuring Apparent Viscosity by Capillary Viscometer at High-Temperature and High-Shear Rates
D4625-04 Test Method for Middle Distillate Fuel Storage Stability at 43|SDC (110|SDF)
D4626-95R00 Practice for Calculation of Gas Chromatographic Response Factors
D4627-92R02 Test Method for Iron Chip Corrosion for Water\NDilutable Metalworking Fluids
D4628-02 Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
D4629-02 Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
D4636-99R04E01 Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
D4682-87R02 Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
D4683-04 Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator
D4684-02A Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
D4693-03 Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
D4715-98R03 Test Method for Coking Value of Tar and Pitch (Alcan)
D4737-03 Test Method for Calculated Cetane Index by Four Variable Equation
D4739-02 Test Method for Base Number Determination by Potentiometric Titration
D4740-04 Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
D4741-00 Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
D4742-02A Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
D4746-98R03E01 Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
D4806-04A Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
D4807-88R99 Test Method for Sediment in Crude Oil by Membrane Filtration
D4808-01 Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
D4809-00 Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
D4814-04A Specification for Automotive Spark-Ignition Engine Fuel
D4815-03 Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C to C Alcohols in Gasoline by Gas Chromatography
D4857-03 Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
D4858-02 Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
D4859-97R03 Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC
D4860-91R00E01 Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating)
D4863-02 Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
D4864-90R00E01 Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography
D4865-98R03E01 Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
D4868-00 Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
D4870-04 Test Method for Determination of Total Sediment in Residual Fuels
D4871-00 Guide for Universal Oxidation/Thermal Stability Test Apparatus
D4892-89R04 Test Method for Density of Solid Pitch (Helium Pycnometer Method)
D4893-94R04 Test Method for Determination of Pitch Volatility
D4898-90R00E01 Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
D4927-02 Test Methods for Elemental Analysis of Lubricant and Additive Components\MBarium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
D4928-00E01 Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
D4929-04 Test Methods for Determination of Organic Chloride Content in Crude Oil
D4930-94R04E01 Test Method for Dust Control Material on Calcined Petroleum Coke
D4931-92R02 Test Method for Gross Moisture in Green Petroleum Coke
D4950-01R04E01 Classification and Specification for Automotive Service Greases
D4951-02 Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
D4952-02 Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
D4953-99A Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
D4998-95R03E01 Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
D5000-89R00 Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor
D5001-03 Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
D5002-99 Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
D5003-95R00E01 Test Method for The Hardgrove Grindability Index (HGI) of Petroleum Coke
D5004-89R04E01 Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
D5006-03 Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
D5018-89R04 Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
D5056-04 Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
D5059-98R03E01 Test Methods for Lead in Gasoline by X-Ray Spectroscopy
D5119 Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine
D5133-01 Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
D5134-98R03 Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
D5182-97R02E01 Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
D5183-95R99E01 Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
D5184-01 Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
D5185-02E02 Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission
Spectrometry (ICP-AES)
D5186-03 Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical Fluid Chromatography
D5187-91R02 Test Method for Determination of Crystallite Size (L of Calcined Petroleum Coke by X-Ray Diffraction
D5188-04A Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
D5190-01 Test Method for Vapor Pressure of Petroleum Products (Automatic Method)
D5191-04A Test Method for Vapor Pressure of Petroleum Products (Mini Method)
D5234-92R02 Guide for Analysis of Ethylene Product
D5236-03 Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
D5273-92R02 Guide for Analysis of Propylene Concentrates
D5274-00 Guide for Analysis of 1,3\NButadiene Product
D5275-03 Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids
D5291-02 Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
D5292-99R04 Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
D5293-04 Test Method for Apparent Viscosity of Engine Oils Between \-5 and \-35|SDC Using the Cold-Cranking Simulator
D5302 Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty
Conditions
Volume 05.03, March 2005
Petroleum Products and Lubricants (III): D 5303 - D 6553
D5303-92R02E01 Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography
D5304-03 Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
D5305-97R02 Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor
D5306-92R02E01 Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
D5307-97R02E01 Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography
D5372-04 Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
D5384-95R00E01 Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
D5441-98R03E01 Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
D5442-93R03E01 Test Method for Analysis of Petroleum Waxes by Gas Chromatography
D5443-04 Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200|SDC by Multi-Dimensional Gas Chromatography
D5452-00 Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
D5453-04 Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
D5480 Test Method for Engine Oil Volatility by Gas Chromatography
D5481-04 Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
D5482-01 Test Method for Vapor Pressure of Petroleum Products (Mini Method\MAtmospheric)
D5483-02 Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
D5500-98R03E01 Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
D5501-04 Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography
D5502-00 Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
D5533 Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIE, Spark-Ignition Engine
D5534-94R99 Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
D5579-04 Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
D5580-02 Test Method for Determination of Benzene, Toluene, Ethylbenzene, -Xylene, -Xylene, C and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
D5598-01 Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
D5599-00 Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
D5600-04 Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D5619-00 Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine
D5620-94R04 Test Method for Evaluating Thin Film Fluid Lubricants in a Drain and Dry Mode Using a Pin and Vee Block Test Machine
D5621-01 Test Method for Sonic Shear Stability of Hydraulic Fluids
D5622-95R00 Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
D5623-94R04E01 Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
D5662-99 Test Method for Determining Automotive Gear Oil Compatability with Typical Oil Seal Elastomers
D5704-04A Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
D5705-03 Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
D5706-97R02E01 Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine
D5707-98R03E01 Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
D5708-02 Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
D5709-95R00E01 Test Method for Sieve Analysis of Petroleum Coke
D5760-95E01 Specification for Performance of Manual Transmission Gear Lubricants
D5761-96R01 Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials
D5762-02 Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
D5763-95R01 Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware
D5769-04 Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
D5770-02 Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
D5771-04 Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
D5772-04 Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
D5773-04 Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
D5797-96R01 Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines
D5798-99R04 Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
D5799-95R04 Test Method for Determination of Peroxides in Butadiene
D5800-04A Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
D5842-95R00 Practice for Sampling and Handling of Fuels for Volatility Measurement
D5844 Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID)
D5845-01 Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and -Butanol in Gasoline by Infrared Spectroscopy
D5846-02 Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
D5853-95R00E01 Test Method for Pour Point of Crude Oils
D5854-96R00 Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
D5862-03 Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine
D5863-00A Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
D5864-00 Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
D5901-03 Test Method for Freezing Point of Aviation Fuels (Automated Optical Method)
D5949-01 Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
D5950-02 Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
D5966-02 Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
D5967-04 Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
D5968-04 Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121|SDC
D5969-02 Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
D5972-02 Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
D5983-97R02 Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel
D5984-97R02E01 Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
D5985-02 Test Method for Pour Point of Petroleum Products (Rotational Method)
D5986-96R01 Test Method for Determination of Oxygenates, Benzene, Toluene, C\NC Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
D6006-97AR03 Guide for Assessing Biodegradability of Hydraulic Fluids
D6021-96R01E01 Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
D6022-01 Practice for Calculation of Permanent Shear Stability Index
D6045-04 Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
D6046-02 Classification of Hydraulic Fluids for Environmental Impact
D6074-99 Guide for Characterizing Hydrocarbon Lubricant Base Oils
D6078-04 Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)
D6079-04 Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
D6080-97R02 Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
D6081-98R04 Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
D6082-01 Test Method for High Temperature Foaming Characteristics of Lubricating Oils
D6120-97R02 Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
D6121-04 Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
D6122-01 Practice for Validation of Multivariate Process Infrared Spectrophotometers
D6138-03 Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
D6139-00 Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
D6158-99 Specification for Mineral Hydraulic Oils
D6159-97R02 Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography
D6160-98R03E01 Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography
D6184-98 Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)
D6185-97R02E01 Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
D6186-98R03E01 Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
D6200-01 Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
D6201-04 Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
D6202-02 Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine
D6203-97R01 Test Method for Thermal Stability of Way Lubricants
D6217-98R03E01 Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
D6224-02 Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
D6227-04A Specification for Grade 82 Unleaded Aviation Gasoline
D6258-04 Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
D6259-98R04 Practice for Determination of a Pooled Limit of Quantitation
D6277-01 Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
D6278-02 Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus
D6293-98R03E01 Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic(O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography
D6296-98R03E01 Test Method for Total Olefins in Spark-ignition Engine Fuels by Multi-dimensional Gas Chromatography
D6299-02 Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
D6300-04 Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
D6304-04A Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
D6334-98R03E01 Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
D6335-03B Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
D6351-99 Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
D6352-04E01 Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700|SDC by Gas Chromatography
D6353-98R03 Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
D6354-98R03 Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
D6371-99 Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
D6374-99R04 Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure
D6375-99A Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
D6376-99 Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy
D6377-03 Test Method for Determination of Vapor Pressure of Crude Oil: VPCR (Expansion Method)
D6378-03 Test Method for Determination of Vapor Pressure (VP) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
D6379-04 Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates\MHigh Performance Liquid Chromatography Method with Refractive Index Detection
D6384-99AE01 Terminology Relating to Biodegradability and Ecotoxicity of Lubricants
D6417-03 Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography
D6421-99AR04 Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
D6422-99 Test Method for Water Tolerance (Phase Separation) of Gasoline-Alcohol Blends
D6423-99R04 Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)
D6424-04A Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines
D6425-02 Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
D6426-04 Test Method for Determining Filterability of Middle Distillate Fuel Oils
D6439-99 Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
D6443-04 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical
Correction Procedure)
D6445-99R04E01 Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry
D6446-01 Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
D6447-03 Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
D6448-99 Specification for Industrial Burner Fuels from Used Lubricating Oils
D6450-99 Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
D6468-99R04 Test Method for High Temperature Stability of Distillate Fuels
D6469-04 Guide for Microbial Contamination in Fuels and Fuel Systems
D6470-99R04 Test Method for Salt in Crude Oils (Potentiometric Method)
D6481-99R04 Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
D6482-01 Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
D6483-04 Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine
D6514-03 Test Method for High Temperature Universal Oxidation Test for Turbine Oils
D6546-00 Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
D6547-00 Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple
D6549-01 Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
D6550-00 Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
D6553-00 Test Method for Coolant Compatibility of Way Lubricants
Volume 05.04, March 2005
Petroleum Products and Lubricants (IV): D 6557 - latest
D6557-04 Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
D6558-00A Test Method for Determination of TGA CO Reactivity of Baked Carbon Anodes and Cathode Blocks
D6559-00A Test Method for Determination of TGA Air Reactivity of Baked Carbon Anodes and Cathode Blocks
D6560-00 Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
D6584-00 Test Method for Determination of Free and Total Glycerin in B-100 Biodiesel Methyl Esters By Gas Chromatography
D6591-00 Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates\MHigh Performance Liquid Chromatography Method with Refractive Index Detection
D6593-04A Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
D6594-04A Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135|SDC
D6595-00 Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
D6596-00 Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials
D6615-04A Specification for Jet B Wide-Cut Aviation Turbine Fuel
D6616-01A Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100|SDC
D6617-00 Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
D6618-04 Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
D6624-01 Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
D6666-04 Guide for Evaluation of Aqueous Polymer Quenchants
D6667-04 Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
D6668-01 Test Method for Discrimination Between Flammability Ratings of F\t=\t0 and F\t=\t1
D6681-04 Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine\MCaterpillar 1P Test Procedure
D6708-04 Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
D6709-04 Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
D6710-02 Guide for Evaluation of Hydrocarbon-Based Quench Oil
D6728-01 Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
D6729-04 Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Meter Capillary High Resolution Gas Chromatography
D6730-01 Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100\NMetre Capillary (with Precolumn) High-Resolution Gas Chromatography
D6731-01 Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
D6732-04 Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
D6733-01 Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50\NMeter Capillary High Resolution Gas Chromatography
D6743-01E01 Test Method for Thermal Stability of Organic Heat Transfer Fluids
D6744-01 Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
D6745-01 Test Method for Linear Thermal Expansion of Electrode Carbons
D6748-02A Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
D6749-02 Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
D6750-04 Test Methods for Evaluation of Engine Oils in A High-Speed, Single-Cylinder Diesel Engine \M1K Procedure (0.4 \% Fuel Sulfur) and 1N Procedure (0.04 \% Fuel Sulfur)
D6751-03A Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
D6756-02 Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
D6791-02 Test Method for Determination of Grain Stability of Calcined Petroleum Coke
D6792-04A Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
D6793-02 Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
D6794-02 Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time
D6795-02 Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time
D6810-02 Test Method for Measurement of Hindered Phenolic Antioxidant Content in HL Turbine Oils by Linear Sweep Voltammetry
D6811-02 Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)
D6812-04A Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines
D6813-02A Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
D6821-02 Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
D6822-02 Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
D6823-02 Specification for Commercial Boiler Fuels With Used Lubricating Oils
D6824-04 Test Method for Determining Filterability of Aviation Turbine Fuel
D6837-04A Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine
D6838-04 Test Method for Cummins M11 High Soot Test
D6839-02 Test Method for Hydrocarbon Types, Oxygenated Compounds and Benzene in Spark Ignition Engine Fuels by Gas Chromatography
D6849-02 Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
D6891-03 Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
D6892-03 Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
D6894-03 Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
D6895-03 Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100|SDC
D6896-03E01 Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
D6897-03A Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
D6898-03 Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig
D6920-03 Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection
D6922-03 Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
D6923-03 Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine\MCaterpillar 1R Test Procedure
D6969-03 Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
D6970-03 Practice for Collection of Calcined Petroleum Coke Samples for Analysis
D6971-04 Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
D6973-04 Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
D6974-04 Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels\MFiltration and Culture Procedures
D6975-04 Test Method for Cummins M11 EGR Test
D6984-04 Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
D6985-04A Specification for Middle Distillate Fuel Oil\MMilitary Marine Applications
D6986-03 Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
D6987-04 Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine
D7038-04 Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
D7039-04 Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
D7040-04 Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
D7041-04 Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection
D7042-04 Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
D7043-04 Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
D7044-04A Specification for Biodegradable Fire Resistant Hydraulic Fluids
D7058-04 Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
D7059-04E01 Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
D7060-04 Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
D7061-04 Test Method for Measuring -Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
D7094-04 Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
D7095-04 Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
Volume 05.05, February 2005
Test Methods for Rating Motor, Diesel, and Aviation Fuels; Catalysts; Manufactured Carbon and Graphite Products
D0613-03B Test Method for Cetane Number of Diesel Fuel Oil
D0909-01 Test Method for Knock Characteristics of Aviation Gasolines by the Supercharge Method
D2699-04E01 Test Method for Research Octane Number of Spark-Ignition Engine Fuel
D2700-04E01 Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
D2885-03 Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
D6890-04 Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
C0559-90R00 Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
C0560-88R98 Test Methods for Chemical Analysis of Graphite
C0561-91R00 Test Method for Ash in a Graphite Sample
C0562-91R00 Test Method for Moisture in a Graphite Sample
C0565-93R98 Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
C0611-98 Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
C0625-95R00 Practice for Reporting Irradiation Results on Graphite
C0651-91R00 Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
C0662-70R98 Specification for Impervious Graphite Pipe and Threading
C0695-91R00 Test Method for Compressive Strength of Carbon and Graphite
C0709-03A Terminology Relating to Manufactured Carbon and Graphite
C0714-85R00 Test Method for Thermal Diffusivity of Carbon and Graphite by a Thermal Pulse Method
C0747-93R98 Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
C0748-98 Test Method for Rockwell Hardness of Graphite Materials
C0749-92R02 Test Method for Tensile Stress-Strain of Carbon and Graphite
C0769-98 Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Young's Modulus
C0781-02 Practice for Testing Graphite and Boronated Graphite Components for High-Temperature Gas-Cooled Nuclear Reactors
C0783-85R00 Practice for Core Sampling of Graphite Electrodes
C0808-75R00 Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
C0816-85R98E01 Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method
C0838-96R01 Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
C0886-98 Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
C1025-91R00 Test Method for Modulus of Rupture in Bending of Electrode Graphite
C1039-85R00 Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
C1179-91R00 Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
D1977-03 Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
D3610-00R04 Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
D3663-03 Test Method for Surface Area of Catalysts and Catalyst Carriers
D3766-86R02 Terminology Relating to Catalysts and Catalysis
D3906-03 Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
D3907-03 Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
D3908-03 Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
D3942-03 Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
D3943-04 Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
D4058-96R01 Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
D4164-03 Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
D4179-01 Test Method for Single Pellet Crush Strength of Formed Catalyst Shapes
D4180-03 Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
D4222-03 Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
D4284-03 Test Method for Determining Pore Volume Distribution of Catalysts by Mercury Intrusion Porosimetry
D4365-95R01 Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
D4438-85R01E01 Test Method for Particle Size\t Distribution\t of\t Catalytic\t Material\t by\t Electronic\t Counting
D4463-96R01 Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
D4464-00 Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering
D4481-04 Test Method for Total Nickel in Fresh Alumina-Base Catalysts
D4512-03 Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
D4513-97R01E01 Test Method for Particle Size Distribution of Catalytic Materials by Sieving
D4567-03 Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
D4641-94R99E01 Practice for Calculation of Pore Size Distributions of Catalysts from Nitrogen Desorption Isotherms
D4642-04 Test Method for Platinum in Reforming Catalysts by Wet Chemistry
D4699-03 Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
D4780-95R01 Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption
D4781-03 Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
D4782-04 Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
D4824-03 Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
D4926-89R01 Test Method for Gamma Alumina Content in Catalysts Containing Silica and Alumina by X-Ray Powder Diffraction
D5153-04 Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
D5154-03 Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
D5357-03 Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
D5757-00 Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets
D5758-01 Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
D6175-03 Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
D6761-04A Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
D7084-04 Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
D7085-04 Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
Volume 05.06, September 2005
Gaseous Fuels; Coal and Coke
D1070-03 Test Methods for Relative Density of Gaseous Fuels
D1071-83R03 Test Methods for Volumetric Measurement of Gaseous Fuel Samples
D1072-90R99 Test Method for Total Sulfur in Fuel Gases
D1142-95R00 Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
D1826-94R03 Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
D1945-03 Test Method for Analysis of Natural Gas by Gas Chromatography
D1946-90R00 Practice for Analysis of Reformed Gas by Gas Chromatography
D1988-91R00 Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes
D3588-98R03 Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
D3956-93R03 Specification for Methane Thermophysical Property Tables
D3984-93R03 Specification for Ethane Thermophysical Property Tables
D4084-05 Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
D4150-03 Terminology Relating to Gaseous Fuels
D4362-93R03 Specification for Propane Thermophysical Property Tables
D4468-85R00 Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry
D4650-93R03 Specification for Normal Butane Thermophysical Property Tables
D4651-93R03 Specification for Isobutane Thermophysical Property Tables
D4784-93R03 Specification for LNG Density Calculation Models
D4810-88R99 Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
D4888-88R99 Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
D4891-89R01 Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
D4984-89R99 Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
D5287-97R02 Practice for Automatic Sampling of Gaseous Fuels
D5454-04 Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
D5503-94R03 Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation
D5504-01 Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
D5954-98 Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
D6228-98R03 Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
D6273-98R03 Test Methods for Natural Gas Odor Intensity
D6350-98R03 Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
D6968-03 Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection
D7164-05 Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
D7166-05 Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
D0121-05 Terminology of Coal and Coke
D0167-93R04E01 Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke
D0197-87R02 Test Method for Sampling and Fineness Test of Pulverized Coal
D0291-86R02 Test Method for Cubic Foot Weight of Crushed Bituminous Coal
D0293-93R04 Test Method for the Sieve Analysis of Coke
D0346-04E01 Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
D0388-99R04E01 Classification of Coals by Rank
D0409-02 Test Method for Grindability of Coal by the Hardgrove-Machine Method
D0440-86R02 Test Method of Drop Shatter Test for Coal
D0441-86R02 Test Method of Tumbler Test for Coal
D0720-91R04E01 Test Method for Free-Swelling Index of Coal
D1412-04 Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30|SDC
D1756-02 Test Method for Determination as Carbon Dioxide of Carbonate Carbon in Coal
D1757-03 Test Method for Sulfate Sulfur in Ash from Coal and Coke
D1857-04 Test Method for Fusibility of Coal and Coke Ash
D2013-04 Practice for Preparing Coal Samples for Analysis
D2014-97R04 Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
D2234_D2234M-03E01 Practice for Collection of a Gross Sample of Coal
D2361-02 Test Method for Chlorine in Coal
D2492-02 Test Method for Forms of Sulfur in Coal
D2639-04E01 Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer
D2797-04 Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
D2798-05 Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
D2799-05 Test Method for Microscopical Determination of the Maceral Composition of Coal
D2961-02E01 Test Method for Single-Stage Total Moisture Less than 15 \% in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize
D3038-93R04 Test Method for Drop Shatter Test for Coke
D3172-89R02 Practice for Proximate Analysis of Coal and Coke
D3173-03 Test Method for Moisture in the Analysis Sample of Coal and Coke
D3174-04 Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
D3175-02 Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
D3176-89R02 Practice for Ultimate Analysis of Coal and Coke
D3177-02 Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke
D3178-89R02 Test Methods for Carbon and Hydrogen in the Analysis Sample of Coal and Coke
D3179-02E01 Test Methods for Nitrogen in the Analysis Sample of Coal and Coke
D3180-89R02 Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
D3302-02AE01 Test Method for Total Moisture in Coal
D3402-93R01 Test Method for Tumbler Test for Coke
D3682-01E01 Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
D3683-04 Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption
D3684-01 Test Method for Total Mercury in Coal by the Oxygen BombCombustion/Atomic Absorption Method
D3761-96R02 Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
D3997-97R04 Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
D4182-97R04 Practice for Evaluation of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke
D4208-02E01 Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
D4239-04A Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
D4326-04 Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence
D4371-91R98 Test Method for Determining the Washability Characteristics of Coal
D4596-99R04 Practice for Collection of Channel Samples of Coal in a Mine
D4606-03 Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
D4621-99R04 Guide for Quality Management in an Organization That Samples or Tests Coal and Coke
D4702-04 Guide for Quality Management of Mechanical Coal Sampling Systems
D4749-87R02E01 Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
D4915 Guide for Manual Sampling of Coal from Tops of Railroad Cars
D4916-04 Practice for Mechanical Auger Sampling
D5016-03 Test Method for Sulfur in Ash from Coal, Coke, and Residues from Coal Combustion Using High-Temperature Tube Furnace Combustion Method with Infrared Absorption
D5061-05 Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke
D5114-90R04 Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
D5142-04 Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
D5192-99R04 Practice for Collection of Coal Samples from Core
D5263-93R01 Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
D5341-99R04 Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)
D5373-02 Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
D5515-97R04E01 Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer
D5671-95R01 Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
D5865-04 Test Method for Gross Calorific Value of Coal and Coke
D5987-96R02 Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
D6172-98R04 Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures
D6315 Practice for Manual Sampling of Coal from Tops of Barges
D6316-04 Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
D6347_D6347M-05 Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
D6349-01 Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma\MAtomic Emission Spectrometry
D6357-04 Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma
Mass Spectrometry, and Graphite Furnace
D6414-01 Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption
D6518-03A Practice for Bias Testing a Mechanical Coal Sampling System
D6542-05 Practice for Tonnage Calculation of Coal in a Stockpile
D6543-00E01 Guide to the Evaluation of Measurements Made by On-Line Coal Analyzers
D6609-01 Guide for Part-Stream Sampling of Coal
D6610 Practice for Manually Sampling Coal from Surfaces of a Stockpile
D6721-01 Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry
D6722-01 Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis
D6796-02 Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
D6883-04 Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
Section 06 - Paints, Related Coatings, and Aromatics
Volume 06.01, January 2005
Paint -- Tests for Chemical, Physical, and Optical Properties; Appearance
D0016-03 Terminology for Paint, Related Coatings, Materials, and Applications
D0215 Practice for the Chemical Analysis of White Linseed Oil Paints
D0281-95R02 Test Method for Oil Absorption of Pigments by Spatula Rub-out
D0332-87R04 Test Method for Relative Tinting Strength of White Pigments by Visual Observation
D0344-97R04 Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
D0387-00 Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller
D0522-93AR01 Test Methods for Mandrel Bend Test of Attached Organic Coatings
D0523-89R99 Test Method for Specular Gloss
D0562-01 Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
D0564-87R02 Test Methods for Liquid Paint Driers
D0609-00 Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
D0660-93R05 Test Method for Evaluating Degree of Checking of Exterior Paints
D0661-93R05 Test Method for Evaluating Degree of Cracking of Exterior Paints
D0662-93R05 Test Method for Evaluating Degree of Erosion of Exterior Paints
D0714-02 Test Method for Evaluating Degree of Blistering of Paints
D0772-86R05 Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
D0822-01 Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
D0823-95R01 Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
D0870-02 Practice for Testing Water Resistance of Coatings Using Water Immersion
D0968-05 Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
D1005-95R01 Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
D1006-01 Practice for Conducting Exterior Exposure Tests of Paints on Wood
D1014-02 Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
D1186-01 Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base
D1200-94R05 Test Method for Viscosity by Ford Viscosity Cup
D1210-05 Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
D1212-91R01 Test Methods for Measurement of Wet Film Thickness of Organic Coatings
D1259-85R01 Test Methods for Nonvolatile Content of Resin Solutions
D1310-01 Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
D1360-98R04 Test Method for Fire Retardancy of Paints (Cabinet Method)
D1400-00 Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base
D1474-98R02 Test Methods for Indentation Hardness of Organic Coatings
D1475-98R03 Test Method For Density of Liquid Coatings, Inks, and Related Products
D1483-95R02 Test Method for Oil Absorption of Pigments by Gardner-Coleman Method
D1535-01 Practice for Specifying Color by the Munsell System
D1544-04 Test Method for Color of Transparent Liquids (Gardner Color Scale)
D1640-03 Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
D1644-01 Test Methods for Nonvolatile Content of Varnishes
D1653-03 Test Methods for Water Vapor Transmission of Organic Coating Films
D1654-05 Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
D1729-96R03 Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
D1735-04 Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
D1978-91R02 Guide for Analysis of Electrocoat Bath Samples
D2134-93R01 Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
D2196-05 Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
D2197-98R04 Test Method for Adhesion of Organic Coatings by Scrape Adhesion
D2201-99 Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
D2244-05 Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
D2245-90R05 Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints
D2247-02 Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
D2248-01A Practice for Detergent Resistance of Organic Finishes
D2348-02 Test Method for Arsenic in Paint
D2349-90R03 Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints
D2350-90R05 Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints
D2351-90R05 Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints
D2352-85R05 Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints
D2369-04 Test Method for Volatile Content of Coatings
D2370-98R02 Test Method for Tensile Properties of Organic Coatings
D2371-85R05 Test Method for Pigment Content of Solvent-Reducible Paints
D2372-85R05 Practice for Separation of Vehicle From Solvent-Reducible Paints
D2373-05 Test Method for Determination of Cobalt in Paint Driers by EDTA Method
D2374-05 Test Method for Lead in Paint Driers by EDTA Method
D2375-05 Test Method for Manganese in Paint Driers by EDTA Method
D2454-95R02 Practice for Determining the Effect of Overbaking on Organic Coatings
D2485-91R00 Test Methods for Evaluating Coatings for High Temperature Service
D2574-00 Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms
D2613-01 Test Method for Calcium or Zinc in Paint Driers by EDTA Method
D2616-96R03 Test Method for Evaluation of Visual Color Difference With a Gray Scale
D2621-87R05 Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
D2697-03 Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
D2698-05 Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
D2745-00 Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
D2794-93R04 Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
D2803-03 Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
D2805-96AR03 Test Method for Hiding Power of Paints by Reflectometry
D2832-92R05 Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
D3022-84R05 Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill
D3134-97R03 Practice for Establishing Color and Gloss Tolerances
D3168-85R05 Practice for Qualitative Identification of Polymers in Emulsion Paints
D3271-87R01 Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis
D3272-76R03 Practice for Vacuum Distillation of Solvents From Solvent-Reducible Paints For Analysis
D3273-00 Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
D3274-95R02 Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation
D3278-96R04E01 Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
D3335-85AR05 Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
D3359-02 Test Methods for Measuring Adhesion by Tape Test
D3361-01 Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
D3363-05 Test Method for Film Hardness by Pencil Test
D3456-86R02 Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
D3539-87R04 Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer
D3618-05 Test Method for Detection of Lead in Paint and Dried Paint Films
D3624-85AR05 Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
D3717-85AR05 Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
D3718-85AR05 Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
D3723-05 Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
D3792-05 Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
D3804-02 Test Method for Iron in Paint Driers by EDTA Method
D3806-98R04 Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
D3891-96R02E01 Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
D3924-80R05 Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
D3925-02 Practice for Sampling Liquid Paints and Related Pigmented Coatings
D3934-90R01 Test Method for Flash/No Flash Test\MEquilibrium Method by a Closed-Cup Apparatus
D3941-90R01 Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
D3960-05 Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
D3964-04 Practice for Selection of Coating Specimens for Appearance Measurements
D3969-01 Test Method for Zirconium in Paint Driers by EDTA Method
D3970-05 Test Method for Cerium in Paint Driers by Oxidimetric Determination
D3988-05 Test Method for Vanadium in Paint Driers by EDTA Method
D3989-01 Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method
D4017-02 Test Method for Water in Paints and Paint Materials by Karl Fischer Method
D4039-93R04 Test Method for Reflection Haze of High-Gloss Surfaces
D4060-01 Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
D4061-94R00 Test Method for Retroreflectance of Horizontal Coatings
D4086-92AR03 Practice for Visual Evaluation of Metamerism
D4140-82R02 Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents
D4141-01 Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
D4144-94R05 Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
D4206-96R01 Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus
D4209-82R02 Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes
D4212-99R05 Test Method for Viscosity by Dip-Type Viscosity Cups
D4214-98 Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
D4287-00R05 Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
D4358-05 Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
D4359-90R00E01 Test Method for Determining Whether a Material is a Liquid or a Solid
D4366 Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
D4370-01 Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
D4399-05 Test Method for Measuring Electrical Conductivity of Electrocoat Baths
D4414-95R01 Practice for Measurement of Wet Film Thickness by Notch Gages
D4449-90R04 Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
D4451-02 Test Method for Pigment Content of Paints by Low-Temperature Ashing
D4457-02 Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph
D4563-02 Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint
D4584-05 Test Method for Measuring Apparent pH of Electrocoat Baths
D4585-99 Practice for Testing Water Resistance of Coatings Using Controlled Condensation
D4587-05 Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
D4610-98R04 Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings
D4708-99R04 Practice for Preparation of Uniform Free Films of Organic Coatings
D4747-02 Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
D4764-01 Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
D4827-03 Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
D4834-03 Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
D4948-89R00E01 Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
D5031-01 Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
D5087-02 Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
D5125-97R05 Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
D5145-03 Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths
D5178-98R02 Test Method for Mar Resistance of Organic Coatings
D5179-02 Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
D5200-03 Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans
D5201-05 Practice for Calculating Formulation Physical Constants of Paints and Coatings
D5325-03 Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints
D5380-93R03 Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
D5381-93R03 Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
D5478-98R03 Test Methods for Viscosity of Materials by a Falling Needle Viscometer
D5531-05 Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
D5588-97R02 Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
D5589-97R02 Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement
D5590-00 Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
D5682-95R02 Test Methods for Electrical Resistivity of Liquid Paint and Related Materials
D5767-95R04 Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
D5794-95R02 Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
D5894-05 Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
D5895-03 Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
D6037-96R02 Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
D6093-97R03 Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
D6131-97R04 Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments
D6132-04 Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage
D6133-02 Test Method for Acetone, -Chlorobenzotrifluoride, Methyl Acetate or -Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
D6165-97R03 Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials
D6191-97R03 Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings
D6266-00AR05 Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
D6438-05 Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
D6580-00R05 Test Method for The Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
D6619-00 Practice for Incorporating Pigments by High Speed Dispersion
D6631-05 Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
D6675-01 Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
D6695-03B Practice for Xenon-Arc Exposures of Paint and Related Coatings
D6762-02A Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
D6886-03 Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy
D6899-03 Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel
D6902-04E01 Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
D6905-03 Test Method for Impact Flexibility of Organic Coatings
D6991-05 Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
D7087-05A Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments
D7091-05 Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
D7187-05 Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
E0167 Practice for Goniophotometry of Objects and Materials
E0179-96R03 Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
E0259-98R03 Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries
E0284-05A Terminology of Appearance
E0308-01 Practice for Computing the Colors of Objects by Using the CIE System
E0312-02 Practice for Description and Selection of Conditions for Photographing Specimens
E0313-05 Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
E0430-05 Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
E0805-01A Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
E0808-01 Practice for Describing Retroreflection
E0809-02 Practice for Measuring Photometric Characteristics of Retroreflectors
E0810-03 Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
E0811-95R01 Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
E0848-94R00 Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates
E0991-98 Practice for Color Measurement of Fluorescent Specimens
E1164-02 Practice for Obtaining Spectrometric Data for Object-Color Evaluation
E1247-03 Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry
E1331-04 Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
E1336-96R03 Test Method for Obtaining Colorimetric Data From a Visual Display Unit by Spectroradiometry
E1341-96R01 Practice for Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry
E1345-98R03 Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
E1347-03 Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
E1348-02 Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
E1349-90R98 Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
E1360-05 Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System
E1455-03 Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters
E1477-98AR03 Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
E1478-97R03 Practice for Visual Color Evaluation of Transparent Sheet Materials
E1499-97R03 Guide for Selection, Evaluation, and Training of Observers
E1501-99R04 Specification for Nighttime Photometric Performance of Retroreflective Pedestrian Markings for Visibility Enhancement
E1541-98R03 Practice for Specifying and Matching Color Using the Colorcurve System
E1651 Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry
E1682-05 Guide for Modeling the Colorimetric Properties of a Visual Display Unit
E1696-04 Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer
E1708-95R01 Practice for Electronic Interchange of Color and Appearance Data
E1709-00E01 Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer
E1710-05 Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
E1743 Practice for Selection and Use of Portable Retroreflectometers for the Measurement of Pavement Marking Materials
E1767-04 Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials
E1808-96R03 Guide for Designing and Conducting Visual Experiments
E1809-01 Test Method for Measurement of High-Visibility Retroreflective-Clothing Marking Material Using a Portable Retroreflectometer
E2022-01 Practice for Calculation of Weighting Factors for Tristimulus Integration
E2030-04 Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings
E2072-04 Specification for Photoluminescent (Phosphorescent) Safety Markings
E2073-02 Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
E2152-01 Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data
E2153-01 Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
E2175-01 Practice for Specifying the Geometry of Multiangle Spectrophotometers
E2176-01 Test Method for Measuring the Coefficient of Retroreflected Luminance (R) of Pavement Markings in a Standard Condition of Continuous Wetting
E2177-01 Test Method for Measuring the Coefficient of Retroreflected Luminance (R) of Pavement Markings in a Standard Condition of Wetness
E2194-03 Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials
E2214-02 Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
E2222-02 Practice for Host Computer Communication with Spectrometers for Color Measurements
E2301-03 Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45|SD:Normal Geometry
E2302-03A Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer
E2366-05 Test Method for Measurement of Daytime Chromaticity of Pavement Marking Materials Using a Portable Reflection Colorimeter
E2367-05 Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter
E2387-05 Practice for Goniometric Optical Scatter Measurements
F0923-00 Guide to Properties of High Visibility Materials Used to Improve Individual Safety
Volume 06.02, February 2006
Paint -- Products and Applications; Protective Coatings; Pipeline Coatings
D0333-01 Guide for Clear and Pigmented Lacquers
D0358-98 Specification for Wood to Be Used as Panels in Weathering Tests of Coatings
D0365-01R05 Guide for Soluble Nitrocellulose Base Solutions
D0610-01 Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
D0711-89R04 Test Method for No-Pick-Up Time of Traffic Paint
D0713-90R04 Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
D0868-85R03 Test Method for Evaluating Degree of Bleeding of Traffic Paint
D0869-85R04 Test Method for Evaluating Degree of Settling of Paint
D0913-03 Test Method for Evaluating Degree of Resistance to Wear of Traffic Paint
D0969-85R03 Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
D1155-03 Test Method for Roundness of Glass Spheres
D1211-97 Test Method for Temperature-Change Resistance of Clear Nitrocellulose Lacquer Films Applied to Wood
D1214-04 Test Method for Sieve Analysis of Glass Spheres
D1308-02E01 Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
D1309-93R04 Test Method for Settling Properties of Traffic Paints During Storage
D1316-93R01 Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
D1546-96R03 Practice for Testing the Performance of Clear Floor Sealers
D1641-04 Practice for Conducting Outdoor Exposure Tests of Varnishes
D1734-93R03 Practice for Making Cementitious Panels for Testing Coatings
D1848 Classification for Reporting Paint Film Failures Characteristic of Exterior Latex Paints
D1849-95R03 Test Method for Package Stability of Paint
D2064-91R03 Test Method for Print Resistance of Architectural Paints
D2065-03 Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
D2066-03E01 Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
D2067-97R03 Test Method for Coarse Particles in Printing Ink Dispersions
D2091-96R03 Test Method for Print Resistance of Lacquers
D2092-95R01E01 Guide for Preparation of Zinc-Coated (Galvanized) Steel Surfaces for Painting
D2198 Test Method for Stain Removal From Multicolor Lacquers
D2199-03 Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers
D2200-95R01E01 Pictorial Surface Preparation Standards for Painting Steel Surfaces
D2205-85R04 Guide for Selection of Tests for Traffic Paints
D2243-95R03 Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
D2336-99 Guide for Specifying Factory Applied Wood Coatings
D2337-01R05 Test Method for Freeze-Thaw Stability of Multicolor Lacquers
D2338-02 Test Method for Determining Particle Size of Multicolor Lacquers
D2486-00 Test Methods for Scrub Resistance of Wall Paints
D2571 Guide for Testing Wood Furniture Lacquers
D2743-68R04 Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography
D2792-69R04 Test Method for Solvent and Fuel Resistance of Traffic Paint
D2793-99R05 Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates
D2830 Test Method for Exterior Durability of Factory-Primed Field Finished Wood Products
D2921-98R05 Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products
D2967-02A Test Method for Corner Coverage of Powder Coatings
D3002-02 Guide for Evaluation of Coatings Applied to Plastics
D3003-01 Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
D3023-98R03 Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents
D3133-01R05 Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
D3170-03 Test Method for Chipping Resistance of Coatings
D3258-04 Test Method for Porosity of White or Near White Paint Films by Staining
D3259-95R01E01 Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle
D3260-01R05 Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products
D3276-00 Guide for Painting Inspectors (Metal Substrates)
D3322-82R05 Practice for Testing Primers and Primer Surfacers Over Preformed Metal
D3424-01 Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
D3450-00R05 Test Method for Washability Properties of Interior Architectural Coatings
D3451-01 Guide for Testing Coating Powders and Powder Coatings
D3459-98 Test Method for Humid-Dry Cycling for Coatings on Wood and Wood Products
D3623-78AR04 Test Method for Testing Antifouling Panels in Shallow Submergence
D3719-00 Test Method for Quantifying Dirt Collection on Coated Exterior Panels
D3730-03 Guide for Testing High-Performance Interior Architectural Wall Coatings
D3732-82R05 Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
D3793-04 Test Method for Low-Temperature Coalescence of Latex Paint Films
D3794-00 Guide for Testing Coil Coatings
D3843-00 Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities
D3911-03 Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions
D3912-95R01 Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants
D3928-00AR05 Test Method for Evaluation of Gloss or Sheen Uniformity
D4040-05 Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer
D4062-99R03 Test Method for Leveling of Paints by Draw-Down Method
D4082-02 Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants
D4138-94R01E01 Test Methods for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means
D4145-83R02 Test Method for Coating Flexibility of Prepainted Sheet
D4146-96R03 Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
D4147-99R03 Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar
D4213-96R03 Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
D4217-02 Test Method for Gel Time of Thermosetting Coating Powder
D4227-99R05 Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
D4228-99R05 Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces
D4236-94R05 Practice for Labeling Art Materials for Chronic Health Hazards
D4242-02 Test Method for Inclined Plate Flow for Thermosetting Coating Powders
D4258-05 Practice for Surface Cleaning Concrete for Coating
D4259-88R99 Practice for Abrading Concrete
D4260-05 Practice for Liquid and Gelled Acid Etching of Concrete
D4261-83R99 Practice for Surface Cleaning Concrete Unit Masonry for Coating
D4262-05 Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
D4263-83R05 Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
D4285-83R99 Test Method for Indicating Oil or Water in Compressed Air
D4286-90R99 Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities
D4302-05 Specification for Artists' Oil, Resin-Oil, and Alkyd Paints
D4303-03 Test Methods for Lightfastness of Colorants Used in Artists' Materials
D4361-97R02 Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter
D4400-99 Test Method for Sag Resistance of Paints Using a Multinotch Applicator
D4417-03 Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
D4446-05 Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments
D4537-04A Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work Inspection in Nuclear Facilities
D4538-95R04 Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
D4541-02 Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
D4618-92R03 Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application
D4619-96R04 Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems
D4707-97R03E01 Test Method for Measuring Paint Spatter Resistance During Roller Application
D4712-87AR05 Guide for Testing Industrial Water-Reducible Coatings
D4713-92R02 Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
D4752-03 Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
D4787-93R99 Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
D4796-88R04 Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
D4797-88R04 Test Methods for Chemical and Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking Containing Lead Chromate and Titanium Dioxide
D4828-94R03E01 Test Methods for Practical Washability of Organic Coatings
D4838-88R03 Test Method for Determining the Relative Tinting Strength of Chromatic Paints
D4938-89R02 Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water
D4939-89R03 Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
D4940-98R03 Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives
D4941-89R04 Practice for Preparing Drawdowns of Artists' Paste Paints
D4942-89R01 Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer
D4946-89R03 Test Method for Blocking Resistance of Architectural Paints
D4958-97R04 Test Method for Comparison of the Brush Drag of Latex Paints
D4960-89R98 Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials
D5007-99R03 Test Method for Wet-to-Dry Hiding Change
D5009-02R05 Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
D5010-05 Guide for Testing Printing Inks and Related Materials
D5043-04 Practice for Field Identification of Coatings
D5063-90R04 Guide for Use of Certification of Coating Conformance Form
D5064-01 Practice for Conducting a Patch Test to Assess Coating Compatibility
D5065-01 Guide for Assessing the Condition of Aged Coatings on Steel Surfaces
D5066-91R05 Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints\MWeight Basis
D5067-05 Specification for Artists' Watercolor Paints
D5068-04 Practice for Preparation of Paint Brushes for Evaluation
D5069-92R02E01 Practice for Preparation of Paint-Roller Covers for Evaluation
D5095-91R02 Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
D5098-05A Specification for Artists' Acrylic Dispersion Paints
D5107-03 Practice for Preparatory Surface Cleaning of Architectural Sandstone
D5108-90R02 Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water
D5139-90R01 Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
D5144-00 Guide for Use of Protective Coating Standards in Nuclear Power Plants
D5146-03 Guide to Testing Solvent-Borne Architectural Coatings
D5150-92R03 Test Method for Hiding Power of Architectural Paints Applied by Roller
D5161-04A Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates)
D5162-01 Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
D5163-05A Guide for Establishing Procedures to Monitor the Performance of Coating Service Level I Coating Systems in an Operating Nuclear Power Plant
D5181-04 Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
D5235-97 Test Method for Microscopical Measurement of Dry Film Thickness of Coatings on Wood Products
D5286-01R05 Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
D5301-92R02 Practice for Physical Characterization of Paint Brushes
D5324-03 Guide for Testing Water-Borne Architectural Coatings
D5326-94AR02 Test Method for Color Development in Tinted Latex Paints
D5327-97R02 Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
D5367-00 Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted
D5382-02 Guide to Evaluation of Optical Properties of Powder Coatings
D5383-02R03 Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists
D5398-97R03 Practice for Visual Evaluation of the Lightfastness of Art Materials by the User
D5401-03 Test Method for Evaluating Clear Water Repellent Coatings on Wood
D5402-93R99 Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
D5403-93R02 Test Methods for Volatile Content of Radiation Curable Materials
D5479-94R00 Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed
D5498-01 Guide for Developing a Training Program for Coating Work Inspectors in Nuclear Facilities
D5499-94R99 Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems
D5517-03 Test Method for Determining Extractability of Metals from Art Materials
D5618-94R05 Test Method for Measurement of Barnacle Adhesion Strength in Shear
D5702-02 Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
D5703-95R01 Practice for Preparatory Surface Cleaning for Clay Brick Masonry
D5722-03 Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure
D5723-95R02 Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
D5724-05 Specification for Gouache Paints
D5795-95R00 Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via|P`Cobb Ring|P' Apparatus
D5796-03 Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device
D5860-95R02 Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
D5861-95R02 Guide for Significance of Particle Size Measurements of Coating Powders
D5909-96AR01 Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance
D5913-96R03 Test Method for Evaluation of Cleanability of Paint Brushes
D5959-96R03 Test Method for Bulk Density of Level Paintbrush Filaments
D5962-96R99 Guide for Maintaining Unqualified Coatings (Paints) Within Level I Areas of a Nuclear Power Facility
D5965-02 Test Methods for Specific Gravity of Coating Powders
D6073-96R01 Test Method for Relative Setting of Heatset Printing Inks by the Sinvatrol Tester
D6137-97R04 Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems
D6189-97R03 Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings
D6206-03 Practice for Sampling of Coating Films
D6237-03 Guide for Painting Inspectors (Concrete and Masonry Substrates)
D6279-03 Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
D6337-98R03E01 Practice for Physical Characterization of Woven Paint Applicator Fabrics
D6386-99R05 Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
D6419-00R05 Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks
D6441-05 Test Methods for Measuring the Hiding Power of Powder Coatings
D6442-05 Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water
D6486-01R05 Practice for Short Term Vehicle Service Exposure of Automotive Coatings
D6487-04 Practice for Preparing Prints of Paste Printing Inks by Rollouts on a Laboratory Flat-Bed Press
D6488-04E01 Terminology Relating to Print Problems
D6489-99 Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating
D6490-99 Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels
D6491-99R03 Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
D6492-99R03 Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
D6531-00R05 Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
D6532-00 Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
D6577-00A Guide for Testing Industrial Protective Coatings
D6578-00 Practice for Determination of Graffiti Resistance
D6583-04 Test Method for Porosity of Paint Film by Mineral Oil Absorption
D6632-01 Test Method for Total Copper in Antifouling Paints
D6665-01 Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
D6676-01E01 Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating
D6677-01 Test Method for Evaluating Adhesion by Knife
D6686-01 Test Method for Evaluation of Tannin Stain Resistance of Coatings
D6688-01 Test Method for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Method
D6736-01 Test Method for Burnish Resistance of Latex Paints
D6737-01 Test Method for Bulk Density of Tapered Paintbrush Filaments
D6763-02 Guide for Testing Exterior Wood Stains
D6801-02A Test Method for Measuring Maximum Spontaneous Heating Temperature of Art Materials
D6846-02 Practice for Preparing Prints of Paste Printing Inks with a Printing Gage
D6900-03 Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
D6901-04 Specification for Artists' Colored Pencils
D6904-03 Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
D6906-03 Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
D6943-03 Practice for Immersion Testing of Industrial Protective Coatings
D6944-03 Test Method for Resistance of Cured Coatings to Thermal Cycling
D6957-03 Practice for Measuring Curl in Paint Brush Filling Material
D6990-05 Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems
D7054-04 Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America
D7055-04 Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
D7072-04 Practice for Evaluating Accelerated Efflorescence of Latex Coatings
D7073-05 Guide for Application and Evaluation of Brush and Roller Applied Paint Films
D7088-04 Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
D7093-04 Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
D7108-05 Guide for Establishing Qualifications for a Nuclear Coatings Specialist
D7163-05 Test Method for Specular Gloss of Printed Matter
D7167-05 Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
D7188-05 Terminology for Printing Inks, Materials, and Processes
D7189-05 Test Method for Relative Mileage of News Ink on Newsprint
D7190-05 Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films
G0006-88R98 Test Method for Abrasion Resistance of Pipeline Coatings
G0008-96R03 Test Methods for Cathodic Disbonding of Pipeline Coatings
G0009-87R98 Test Method for Water Penetration into Pipeline Coatings
G0010-83R02 Test Method for Specific Bendability of Pipeline Coatings
G0011-04 Test Method for Effects of Outdoor Weathering on Pipeline Coatings
G0012-83R98 Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
G0013 Test Method for Impact Resistance of Pipeline Coatings(Limestone Drop Test)
G0014-04 Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
G0017-88R98 Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
G0018-88R98 Test Method for Joints, Fittings, and Patches in Coated Pipelines
G0019-04 Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial
G0020-88R02 Test Method for Chemical Resistance of Pipeline Coatings
G0042-96R03 Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
G0055-88R98 Test Method for Evaluating Pipeline Coating Patch Materials
G0062-87R98E01 Test Methods for Holiday Detection in Pipeline Coatings
G0070-81R98 Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
G0080-88R98 Test Method for Specific Cathodic Disbonding of Pipeline Coatings
G0095-87R98E01 Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
Volume 06.03, March 2006
Paint -- Pigments, Drying Oils, Polymers, Resins, Naval Stores, Cellulosic Esters, and Ink Vehicles
D0012-88R98 Specification for Raw Tung Oil
D0013-02 Specification for Spirits of Turpentine
D0029 Test Methods for Sampling and Testing Lac Resins
D0034-91R03 Guide for Chemical Analysis of White Pigments
D0049-83R02 Test Methods of Chemical Analysis of Red Lead
D0050-90R05 Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese
D0079-86R04 Specification for Zinc Oxide Pigments
D0081-87R03 Specification for Basic Carbonate White Lead Pigment
D0083-84R02 Specification for Red Lead Pigment
D0085-05 Specification for Ochre Pigment
D0124-88R98 Specification for Degummed Soybean Oil
D0126-87R02 Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
D0153-84R03 Test Methods for Specific Gravity of Pigments
D0154-85R01 Guide for Testing Varnishes
D0185-84R99 Test Methods for Coarse Particles in Pigments, Pastes, and Paints
D0209-81R03 Specification for Lampblack Pigment
D0210-05 Specification for Bone Black Pigment
D0211-67R02 Specification for Chrome Yellow and Chrome Orange Pigments
D0233-02 Test Methods of Sampling and Testing Turpentine
D0234-82R98 Specification for Raw Linseed Oil
D0237-57R97 Specification for Orange Shellac and Other Lacs
D0260-86R01 Specification for Boiled Linseed Oil
D0261-75R99 Specification for Iron Blue Pigment
D0262-81R99 Specification for Ultramarine Blue Pigment
D0263-05 Specification for Chrome Oxide Green Pigment
D0267-82R03 Specification for Gold Bronze Powder
D0269-97R02 Test Method for Insoluble Matter in Rosin and Rosin Derivatives
D0279-02 Test Methods for Bleeding of Pigments
D0280-01 Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments
D0283-84R99 Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments
D0284 Test Methods for Chemical Analysis of Mercuric Oxide Pigment
D0301-95R04 Test Methods for Soluble Cellulose Nitrate
D0305-84R03 Test Method for Solvent-Extractable Material in Black Pigments
D0360-89R01 Specification for Shellac Varnishes
D0444-88R03 Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
D0464-95R99 Test Methods for Saponification Number of Naval Store Products Including Tall Oil and Other Related Products
D0465-01 Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related Products
D0475 Specification for Pure Para Red Toner Pigment
D0476-00R05 Classification for Dry Pigmentary Titanium Dioxide Products
D0478-02 Specification for Zinc Yellow (Zinc Chromate) Pigments
D0480-88R03 Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
D0509-05 Test Methods of Sampling and Grading Rosin
D0520-00R05 Specification for Zinc Dust Pigment
D0521-02 Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)
D0555-84R98 Guide for Testing Drying Oils
D0561-82R03 Specification for Carbon Black Pigment for Paint
D0563 Test Method for Phthalic Anhydride Content of Alkyd Resins and Resin Solutions
D0601-87R98 Specification for Oiticica Oil (Permanently Liquid)
D0602-81R03 Specification for Barium Sulfate Pigments
D0603 Specification for Aluminum Silicate Pigments (Hydrous)
D0604 Specification for Diatomaceous Silica Pigment
D0605-82R03 Specification for Magnesium Silicate Pigment (Talc)
D0607-82R03 Specification for Wet Ground Mica Pigments
D0656 Specification for Pure Toluidine Red Toner
D0715-86R03 Test Methods for Analysis of Barium Sulfate Pigment
D0716-86R03 Test Methods for Evaluating Mica Pigment
D0717-86R03 Test Methods for Analysis of Magnesium Silicate Pigment
D0718-86R03 Test Methods for Analysis of Aluminum Silicate Pigment
D0719 Test Methods for Analysis of Diatomaceous Silica Pigment
D0763-01 Specification for Raw and Burnt Umber Pigments
D0765-87R03 Specification for Raw and Burnt Sienna Pigments
D0768-01 Specification for Yellow Iron Oxide Hydrated
D0769-01 Specification for Black Synthetic Iron Oxide
D0801-02 Test Methods for Sampling and Testing Dipentene
D0802-02 Test Methods for Sampling and Testing Pine Oils
D0803-03 Test Methods for Testing Tall Oil
D0804-02 Terminology Relating to Naval Stores, Including Tall Oil and Related Products
D0817-96R04 Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
D0871-96R04 Test Methods of Testing Cellulose Acetate
D0889-99R04 Test Method for Volatile Oil in Rosin
D0890-98R03 Test Method for Water in Liquid Naval Stores
D0912 Specification for Cuprous Oxide for Use in Antifouling Paints
D0914-00 Test Methods for Ethylcellulose
D0960-02A Specification for Raw Castor Oil
D0961-86R01 Specification for Dehydrated Castor Oil
D0962-81R03 Specification for Aluminum Powder and Paste Pigments for Paints
D0964-03 Specification for Metallic Copper Powder for Use in Antifouling Paints
D0970 Test Methods for Para Red and Toluidine Red Pigments
D1013-93R98 Test Method for Determining Total Nitrogen in Resins and Plastics
D1065-96R01 Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products
D1131 Test Methods of Testing Rosin Oils
D1135-86R04 Test Methods for Chemical Analysis of Blue Pigments
D1198-93R98 Test Method for Solvent Tolerance of Amine Resins
D1199-86R03 Specification for Calcium Carbonate Pigments
D1208-96R02 Test Methods for Common Properties of Certain Pigments
D1240-02 Test Methods for Rosin Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products
D1301-91R03 Test Methods for Chemical Analysis of White Lead Pigments
D1306 Test Method for Phthalic Anhydride Content of Alkyd Resins and Esters Containing Other Dibasic Acids (Gravimetric)
D1312-93R98 Test Methods for Apparent Free Phenols in Synthetic Phenolic Resins or Solutions Used for Coating Purposes
D1343-95R00 Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method
D1347 Test Methods for Methylcellulose
D1348-94R03 Test Methods for Moisture in Cellulose
D1358 Test Method for Spectrophotometric Diene Value of Dehydrated Castor Oil and Its Derivatives
D1366-86R03 Practice for Reporting Particle Size Characteristics of Pigments
D1392-92R98 Specification for Safflower Oil
D1394-76R03 Test Methods for Chemical Analysis of White Titanium Pigments
D1396-92R98 Test Methods for Chemical Analysis of Poly(Vinyl Butyral)
D1397-93R98 Test Method for Unsaponifiable Matter in Alkyd Resins and Resin Solutions
D1398-93R98 Test Method for Fatty Acid Content of Alkyd Resins and Alkyd Resin Solutions
D1439-03 Test Methods for Sodium Carboxymethylcellulose
D1462-92R98 Specification for Refined Soybean Oil
D1466 Test Method for Sampling Liquid Oils and Fatty Acids Commonly Used in Paints, Varnishes, and Related Materials
D1467 Guide for Testing Fatty Acids Used in Protective Coatings
D1469 Test Method for Total Rosin Acids Content of Coating Vehicles
D1537-60R98 Specification for Distilled Soybean Fatty Acids
D1538-60R98 Specification for Distilled Linseed Fatty Acids
D1539-60R98 Specification for Dehydrated Castor Acids
D1541-97 Test Method for Total Iodine Value of Drying Oils and Their Derivatives
D1545-98 Test Method for Viscosity of Transparent Liquids by Bubble Time Method
D1585-96R03 Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products
D1615 Test Methods for Glycerol, Ethylene Glycol, and Pentaerythritol in Alkyd Resins
D1639 Test Method for Acid Value of Organic Coating Materials
D1647 Test Methods for Resistance of Dried Films of Varnishes to Water and Alkali
D1648-86R03 Specification for Basic Lead Silicochromate Pigment
D1649-01 Specification for Strontium Chromate Pigment
D1652-04 Test Method for Epoxy Content of Epoxy Resins
D1695-96R01 Terminology of Cellulose and Cellulose Derivatives
D1696-95R00 Test Method for Solubility of Cellulose in Sodium Hydroxide
D1725-04 Test Method for Viscosity of Resin Solutions
D1726-03 Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
D1795-96R01E01 Test Method for Intrinsic Viscosity of Cellulose
D1841-63R98 Specification for Distilled Coconut Fatty Acids
D1842-63R98 Specification for Distilled Corn Fatty Acids
D1843-63R98 Specification for Fractionated and Distilled Cottonseed Fatty Acids
D1844-86R03 Test Methods for Chemical Analysis of Basic Lead Silicochromate
D1845-86R03 Test Methods for Chemical Analysis of Strontium Chromate Pigment
D1847-93R98 Test Methods for Total Chlorine Content of Epoxy Resins
D1926-00 Test Methods for Carboxyl Content of Cellulose
D1950 Test Method for Acetone Tolerance of Heat-Bodied Drying Oils
D1951 Test Method for Ash in Drying Oils and Fatty Acids
D1952 Test Method for Quantitative Determination of Break in Drying Oils
D1954 Test Method for Foots in Raw Linseed Oil (Volumetric Method)
D1955 Test Method for Gel Time of Drying Oils
D1957-86R01 Test Method for Hydroxyl Value of Fatty Oils and Acids
D1958 Test Method for Chloroform Insoluble Matter in Oiticica Oil
D1959-97 Test Method for Iodine Value of Drying Oils and Fatty Acids
D1960 Test Method for Loss on Heating of Drying Oils
D1962 Test Method for Saponification Value of Drying Oils, Fatty Acids, and Polymerized Fatty Acids
D1963 Test Method for Specific Gravity of Drying Oils, Varnishes, Resins, and Related Materials at 25/25|SDC
D1964 Test Method for Tung Oil Quality
D1965-87R98 Test Method for Unsaponifiable Matter in Drying Oils, Fatty Acids, and Polymerized Fatty Acids
D1966-69R98 Test Method for Foots in Raw Linseed Oil (Gravimetric Method)
D1967 Test Method for Measuring Color After Heating of Drying Oils
D1979-97 Test Method for Free Formaldehyde Content of Amino Resins
D1980-87R98 Test Method for Acid Value of Fatty Acids and Polymerized Fatty Acids
D1981-02 Test Method for Measuring Color After Heating of Tall Oil Fatty Acids
D1982-85R04 Test Method for Titer of Fatty Acids
D1983 Test Method for Fatty Acid Composition by Gas-Liquid Chromatography of Methyl Esters
D2071-87R98 Test Methods for Fatty Nitrogen Products
D2072-92R98E01 Test Method for Water in Fatty Nitrogen Compounds
D2073-92R98E01 Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines, Amidoamines, and Diamines by Referee Potentiometric Method
D2074-92R98 Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
D2075-92R98 Test Method for Iodine Value of Fatty Amines, Amidoamines, and Diamines
D2076-92R98 Test Methods for Acid Value and Amine Value of Fatty Quaternary Ammonium Chlorides
D2077-92R98 Test Method for Ash in Fatty Quaternary Ammonium Chlorides
D2078 Test Method for Iodine Value of Fatty Quaternary Ammonium Chlorides
D2079-92R98 Test Method for Nonvolatile Matter (Solids) in Fatty Quaternary Ammonium Chlorides
D2080-92R98 Test Method for Average Molecular Weight of Fatty Quaternary Ammonium Chlorides
D2081-92R98 Test Method for pH of Fatty Quaternary Ammonium Chlorides
D2082-92R98 Test Method for Percent of Non-Amines in Fatty Nitrogen Compounds
D2083-92R98 Test Method for Calculation of Percent of Primary, Secondary, and Tertiary Amines in Fatty Amines
D2090-98 Test Method for Clarity and Cleanness of Paint and Ink Liquids
D2218-67R02 Specification for Molybdate Orange Pigments
D2354-98 Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
D2363-79R00E01 Test Methods for Hydroxypropyl Methylcellulose
D2364-01 Test Methods for Hydroxyethylcellulose
D2448-85R02 Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment
D2455 Test Method for Identification of Carboxylic Acids in Alkyd Resins
D2456-91R97E01 Test Method for Identification of Polyhydric Alcohols in Alkyd Resins
D2572-97R03E01 Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
D2575-70R98 Methods of Testing Polymerized Fatty Acids
D2689-88R99 Practices for Testing Alkyd Resins
D2690-98 Test Method for Isophthalic Acid in Alkyd and Polyester Resins
D2800-92R98 Test Method for Preparation of Methyl Esters From Oils for Determination of Fatty Acid Composition by Gas-Liquid Chromatography
D2929-89R00 Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence
D2998 Test Method for Polyhydric Alcohols in Alkyd Resins
D3021-01 Specification for Phthalocyanine Green Pigments
D3132 Test Method for Solubility Range of Resins and Polymers
D3169-89R01 Specification for Refined Sunflower Oil
D3256-86R04 Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments
D3280-85R04 Test Methods for Analysis of White Zinc Pigments
D3360 Test Method for Particle Size Distribution by Hydrometer of the Common White Extender Pigments
D3432 Test Method for Unreacted Toluene Diisocyanates in Urethane Prepolymers and Coating Solutions by Gas Chromatography
D3516-89R00 Test Methods for Ashing Cellulose
D3619 Specification for Aluminum Silicate Pigments (Anhydrous)
D3680 Test Method for Residual Vinyl Chloride Monomer Content of Poly(Vinyl Chloride) Resins, Compounds, and Copolymers by Solution Injection Technique
D3720-90R05 Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
D3721-05 Specification for Synthetic Red Iron Oxide Pigment
D3722-05 Specification for Natural Red and Brown Iron Oxide Pigments
D3724-01 Specification for Synthetic Brown Iron Oxide Pigment
D3725-78R98 Test Method for Semiquantitative Determination of Fish Oil in Drying Oils and Drying Oil Fatty Acids by Gas-Liquid Chromatography
D3733-93R98 Test Method for Silicon Content of Silicone Polymers and Silicone-Modified Alkyds by Atomic Absorption
D3872-05 Test Method for Ferrous Iron in Iron Oxides
D3876-96R01 Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography
D3926-05 Test Methods for Percent Solids in Titanium Dioxide Slurries
D3971-89R04 Test Method for Dichloromethane-Soluble Matter in Cellulose
D4085-93R03 Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
D4139-04 Guide for Determining Volatile and Nonvolatile Content of Pigments
D4142-89R01 Guide for Testing Epoxy Resins
D4143-89R01 Guide for Testing Latex Vehicles
D4277-83R98 Guide for Testing Amino Resins
D4288-02 Specification for Calcium Borosilicate Pigments
D4301-05 Test Method for Total Chlorine in Epoxy Resins and Compounds
D4368 Guide for Testing Poly(Vinyl Chloride) Resins
D4450-85R02 Test Method for Analysis of Zinc Hydroxy Phosphite Pigment
D4462-02 Specification for Zinc Hydroxy Phosphite Pigment
D4487-90R03 Test Methods for Analysis of Calcium Borosilicate
D4613 Test Method for Measuring Apparent pH of Water Insoluble Phenol-Formaldehyde Resins
D4639 Test Method for Volatile Content in Phenolic Resins
D4640-86R01 Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
D4706-93R98 Test Method for Qualitative Determination of Methylol Group in Phenolic Resins
D4758-92R98 Test Method for Nonvolatile Content of Latexes
D4794-94R03 Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether Products by Gas Chromatography
D4795-94R03 Test Method for Nitrogen Content of Soluble Nitrocellulose\MAlternative Method
D5062-96R01 Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
D5097 Test Method for Filter-Retained Solids Content of Polymer Latexes
D5165-93R04 Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
D5166-97R03 Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
D5180-93R98 Test Method for Quantitative Test for Turbidity in Clear Liquids
D5400-03 Test Methods for Hydroxypropylcellulose
D5532 Specification for Micaceous Iron Oxide Pigments for Paint
D5661-95R01 Test Method for Relative Solvency of Petroleum Oils by the PKP Method
D5768-02 Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
D5896-96R01 Test Method for Carbohydrate Distribution of Cellulosic Materials
D5897-96R01 Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration\MAlternative Method
D5910-96 Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
D5958-99R05E01 Practices for Preparation of Oil-Based Ink Resin Solutions
D5974-00 Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography
D6038-05 Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)
D6090-99R04 Test Method for Softening Point Resins (Mettler Cup and Ball Method)
D6166-97R03 Test Method for Color of Naval Stores and Related Products (Instrumental Determination of Gardner Color)
D6188-97R03 Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall
D6267-05 Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
D6280-98R03 Specification for Zinc Phosphate Pigments
D6336-98R04 Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer
D6387-99 Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
D6440-05 Terminology Relating to Hydrocarbon Resins
D6493-05 Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring-and-Ball Apparatus
D6579-00 Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
D6604-00 Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
D6605-00 Practice for Determining the Color Stability of Hydrocarbon Resins After Heating
D6606-00R05 Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer
D6687-04 Guide for Testing Printing Ink Vehicles and Components Thereof
D6887-03E01 Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions
D6942-03 Test Method for Stability of Cellulose Fibers in Alkaline Environments
D6989-03 Practices for Preparation of Solvent and Water Based Ink Resin Solutions
E0028-99R04 Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
Volume 06.04, March 2006
Paint -- Solvents; Aromatic Hydrocarbons
D0235-02 Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
D0268-01 Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
D0304-05 Specification for -Butyl Alcohol (Butanol)
D0319-04 Specification for Amyl Alcohol (Synthetic)
D0329-02 Specification for Acetone
D0330-93R01 Specification for 2-Butoxyethanol
D0331-05 Specification for 2-Ethoxyethanol
D0363 Specification for Tricresyl Phosphate
D0600-90R01 Specification for Liquid Paint Driers
D0608-05 Specification for Dibutyl Phthalate
D0740-05 Specification for Methyl Ethyl Ketone
D0770-05 Specification for Isopropyl Alcohol
D1007-05 Specification for -Butyl Alcohol
D1078-05 Test Method for Distillation Range of Volatile Organic Liquids
D1133-04 Test Method for Kauri-Butanol Value of Hydrocarbon Solvents
D1152-97R01 Specification for Methanol (Methyl Alcohol)
D1153-94R01 Specification for Methyl Isobutyl Ketone
D1209-05 Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
D1257-90R01 Specification for High-Gravity Glycerin
D1258-05 Test Methods for High-Gravity Glycerin
D1296-01 Test Method for Odor of Volatile Solvents and Diluents
D1353-03 Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
D1363-94R01 Test Method for Permanganate Time of Acetone and Methanol
D1364-02 Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
D1399 Test Method for Unsaponifiable Contents of Tricresyl Phosphate
D1468 Test Method for Volatile Matter in Tricresyl Phosphate
D1476-02 Test Method for Heptane Miscibility of Lacquer Solvents
D1612-05 Test Method for Acetone in Methanol
D1613-03 Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
D1614-03 Test Method for Alkalinity in Acetone
D1617-90R01 Test Method for Ester Value of Solvents and Thinners
D1718-03 Specification for Isobutyl Acetate (95 % Grade)
D1719-05 Specification for Isobutyl Alcohol
D1720-03 Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions
D1721-97R01 Test Method for Permanganate Time of Tricresyl Phosphate
D1722-98R04 Test Method for Water Miscibility of Water-Soluble Solvents
D1836-02 Specification for Commercial Hexanes
D1969-01 Specification for 2-Ethylhexanol
D2086-03 Test Method for Acidity in Vinyl Acetate and Acetaldehyde
D2087-97R01 Test Method for Iron in Formaldehyde Solutions
D2190-97R01 Specification for Vinyl Acetate
D2191-97R01 Test Method for Acetaldehyde Content of Vinyl Acetate
D2192-96R00 Test Method for Purity of Aldehydes and Ketones
D2193-97R01 Test Method for Hydroquinone in Vinyl Acetate
D2194-02 Test Method for Concentration of Formaldehyde Solutions
D2195-05 Test Methods for Pentaerythritol
D2378-02 Specification for Formaldehyde 50 % Grade Uninhibited and 37\t% Grade Inhibited and Uninhibited
D2379-04 Test Method for Acidity of Formaldehyde Solutions
D2380-04 Test Method for Methanol Content of Formaldehyde Solutions
D2627-02 Specification for Diacetone Alcohol
D2634-02 Specification for Methyl Amyl Acetate (95 % Grade)
D2635-01 Specification for Methyl Isobutyl Carbinol
D2636-01 Specification for Hexylene Glycol
D2693-02 Specification for Ethylene Glycol
D2694-05 Specification for Diethylene Glycol
D2804-02 Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
D2916-04 Specification for Isophorone
D2917-02 Specification for Methyl Isoamyl Ketone
D3125-97R01 Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
D3128-02 Specification for 2-Methoxyethanol
D3130-03 Specification for -Propyl Acetate (96 % Grade)
D3131-02 Specification for Isopropyl Acetate (99 % Grade)
D3257-01 Test Methods for Aromatics in Mineral Spirits by Gas Chromatography
D3329-03 Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
D3362-05 Test Method for Purity of Acrylate Esters by Gas Chromatography
D3540-90R01 Specification for Primary Amyl Acetate, Synthetic (98 % Grade)
D3541-05 Specification for 2-Ethylhexyl Acrylate
D3545-02 Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
D3546-05 Test Method for Formic Acid in Glacial Acetic Acid
D3547-05 Specification for -Butyl Acrylate
D3548-04 Specification for Ethyl Acrylate
D3620-04 Specification for Glacial Acetic Acid
D3622-05 Specification for 1-Propanol (-Propyl Alcohol)
D3728-03 Specification for 2-Ethoxyethyl Acetate (99 % Grade)
D3734-05 Specification for High-Flash Aromatic Naphthas
D3735-02 Specification for VM&P Naphthas
D3845-05 Specification for Glacial Methacrylic Acid
D3893-03 Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
D4360-03 Specification for Methyl n-Amyl Ketone
D4367-02 Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography
D4415-05 Test Methods for Determination of Dimer in Acrylic Acid
D4416-04 Specification for Acrylic Acid
D4614-05 Specification for Ethyl Acetate (All Grades)
D4615-95R01 Specification for -Butyl Acetate (All Grades)
D4709-02 Specification for Methyl Acrylate
D4710-02 Specification for Acetaldehyde
D4773-02 Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
D4835-03 Specification for Propylene Glycol Monomethyl Ether Acetate
D4836-04 Specification for Dipropylene Glycol Monomethyl Ether
D4837-02 Specification for Propylene Glycol Monomethyl Ether
D5008-01 Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
D5137-01 Specification for Hexyl Acetate
D5164-05 Specification for Propylene Glycol and Dipropylene Glycol
D5399-04 Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
D6229-01 Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography
D7090-04 Test Method for Purity of Isophorone by Capillary Gas Chromatography
D0841-02 Specification for Nitration Grade Toluene
D0843-97R01 Specification for Nitration Grade Xylene
D0847-04 Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
D0848-03 Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
D0849-05 Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
D0850-03 Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
D0852-02 Test Method for Solidification Point of Benzene
D0853-04 Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons
D1492-02 Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
D1493 Test Method for Solidification Point of Industrial Organic Chemicals
D1555-04A Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
D1555M-04A Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
D1631-99R04 Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
D1685-05 Test Method for Traces of Thiophene in Benzene by Spectrophotometry
D1686-96R04 Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
D2030 Test Method for Water Solubility of Refined Pyridine
D2031 Test Method for Reducing Substances in Refined Pyridine
D2119-03 Test Method for Aldehydes in Styrene Monomer
D2121-00 Test Methods for Polymer Content of Styrene Monomer and AMS (|ga\NMethylstyrene)
D2306-00 Test Method for C Aromatic Hydrocarbon Analysis by Gas Chromatography
D2323 Specification for Refined Pyridine (1 Degree)
D2340-03 Test Method for Peroxides in Styrene Monomer
D2359-02 Specification for Refined Benzene-535
D2360-04A Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
D2403-96R03E01 Specification for Refined Phthalic Anhydride-1308
D2439-96R03E01 Specification for Refined Phenol
D2827-04 Specification for Styrene Monomer
D2930-03 Test Method for Maleic Acid in Maleic Anhydride by Potentiometric Titration
D2935 Test Method for Apparent Density of Industrial Aromatic Hydrocarbons
D3054-98 Test Methods for Analysis of Cyclohexane by Gas Chromatography
D3160-03 Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (|ga\NMethylstyrene)
D3193-96R03 Specification for Ethylbenzene
D3264 Specification for Industrial Grade Aniline
D3366-95R03E01 Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale)
D3436 Practice for Sampling and Handling Aniline
D3437-03 Practice for Sampling and Handling Liquid Cyclic Products
D3438-99 Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
D3504-96R03E01 Specification for Maleic Anhydride
D3505-96R00 Test Method for Density or Relative Density of Pure Liquid Chemicals
D3627 Test Method for Color of Cresylic Acids (|P`C|P' Series Standards)
D3760-02E01 Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
D3797-05 Test Method for Analysis of -Xylene by Gas Chromatography
D3798-03 Test Method for Analysis of p-Xylene by Gas Chromatography
D3852-99 Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid
D3961 Test Method for Trace Quantities of Sulfur in Liquid Aromatic Hydrocarbons by Oxidative Microcoulometry
D4077-04 Specification for Cumene (Isopropylbenzene)
D4297-05 Practice for Sampling and Handling Bisphenol A (4,4` -Isopropylidinediphenol)
D4471-00R04 Test Method for Pyridine Bases in Cresylic Acid by Direct Titration
D4492-03 Test Method for Analysis of Benzene by Gas Chromatography
D4493-03 Test Method for Solidification Point of Bisphenol A (4,4`-Isopropylidenediphenol)
D4534-99 Test Method for Benzene Content of Cyclic Products by Gas Chromatography
D4590-00 Test Method for Colorimetric Determination of -Butylcatechol In Styrene Monomer or AMS (|ga\NMethylstyrene) by Spectrophotometry
D4734-04 Specification for Refined Benzene-545
D4735-02 Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography
D4789-03 Test Method for Solution Color of Bisphenol A (4,4`-Isopropylidenediphenol)
D4790-99R04 Terminology of Aromatic Hydrocarbons and Related Chemicals
D4961 Test Methods for Gas Chromatographic Analysis of Major Organic Impurities in Phenol Produced by the Cumene Process
D5060-95R00E01 Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
D5135-02E01 Test Method for Analysis of Styrene by Capillary Gas Chromatography
D5136-00R04 Specification for High Purity p-Xylene
D5194-04 Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
D5211-01 Specification for Xylenes for -Xylene Feedstock
D5309-02 Specification for Cyclohexane 999
D5310-00R04 Test Method for Tar Acid Composition by Capillary Gas Chromatography
D5386-05 Test Method for Color of Liquids Using Tristimulus Colorimetry
D5471-04E01 Specification for O-Xylene 980
D5606-01 Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock
D5713-05 Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
D5776-99 Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
D5808-03 Test Method for Determining Organic Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
D5871-04 Specification for Benzene for Cyclohexane Feedstock
D5917-02 Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
D6069-01 Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
D6142-03 Test Method for Analysis of Phenol by Capillary Gas Chromatography
D6143-05 Test Method for Iron Content of Bisphenol A (4,4` - Isopropylidenediphenol)
D6144-04 Test Method for Analysis of AMS (|ga-Methylstyrene) by Capillary Gas Chromatography
D6212-99 Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Rateometric Colorimetry
D6269 Test Method for Solidification Point of -Xylene
D6313-99 Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Sulfur Specific Difference Photometry
D6366-99 Test Method for Total Trace Nitrogen and Its Derivatives in Liquid Aromatic Hydrocarbons by Oxidative Combustion and Electrochemical Detection
D6367-04 Specification for AMS (|ga-Methylstyrene)
D6428-99 Test Method for Total Sulfur in Liquid Aromatic Hydrocarbons and Their Derivatives by Oxidative Combustion and Electrochemical Detection
D6526-03E01 Test Method for Analysis of Toluene by Capillary Column Gas Chromatography
D6563-05 Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
D6621-00 Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
D6809-02 Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
D6875-03 Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
D7011-04 Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
D7057-04 Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
D7124-05 Specification for Benzene for use with Zeolite Based Catalysts
D7125-04 Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process
Section 07 - Textiles
Volume 07.01, January 2005
Textiles (I): D 76 - D 4391
D0076-99R05 Specification for Tensile Testing Machines for Textiles
D0123-03 Terminology Relating to Textiles
D0204-02 Test Methods for Sewing Threads
D0276-00A Test Methods for Identification of Fibers in Textiles
D0434 Test Method for Resistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam
D0461 Test Methods for Felt
D0519-04 Test Method for Length of Fiber in Wool Top
D0578-00 Specification for Glass Fiber Strands
D0579-04 Specification for Greige Woven Glass Fabrics
D0580-04 Specification for Greige Woven Glass Tapes and Webbings
D0581-99 Specification for Glass Fiber Greige Braided Tubular Sleeving
D0584-96R05 Test Method for Wool Content of Raw Wool\MLaboratory Scale
D0629-99 Test Methods for Quantitative Analysis of Textiles
D0737-04 Test Method for Air Permeability of Textile Fabrics
D0861-01A Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns
D0885-04 Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers
D1059-01 Test Method for Yarn Number Based on Short-Length Specimens
D1060-96R05 Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean Wool Fiber Present
D1113-90AR01 Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool
D1117-01 Guide for Evaluating Nonwoven Fabrics
D1230-94R01 Test Method for Flammability of Apparel Textiles
D1234-85R01 Test Method of Sampling and Testing Staple Length of Grease Wool
D1244-98R05 Practice for Designation of Yarn Construction
D1282-05 Test Method for Resistance to Airflow as an Indication of Average Fiber Diameter of Wool Top, Card Sliver, and Scoured Wool
D1283-85R01 Test Method for Alkali-Solubility of Wools
D1294-05 Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length
D1334-05 Test Method for Wool Content of Raw Wool\MCommercial Scale
D1335-05 Test Method for Tuft Bind of Pile Yarn Floor Coverings
D1336-97R03 Test Method for Distortion of Yarn in Woven Fabrics
D1388-96R02 Test Method for Stiffness of Fabrics
D1422-99 Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method
D1423-02 Test Method for Twist in Yarns by Direct-Counting
D1424-96R04 Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
D1425 Test Method for Unevenness of Textile Strands Using Capacitance Testing Equipment
D1440-96R02 Test Method for Length and Length Distribution of Cotton Fibers (Array Method)
D1441-00 Practice for Sampling Cotton Fibers for Testing
D1442-00 Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures)
D1445-05 Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method)
D1447-00 Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement
D1448-05 Test Method for Micronaire Reading of Cotton Fibers
D1464-90R02 Test Method for Differential Dyeing Behavior of Cotton
D1518-85R03 Test Method for Thermal\t Transmittance\t of\t Textile\t Materials
D1574-04 Test Method for Extractable Matter in Wool and Other Animal Fibers
D1575-90R01 Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver
D1576-90R01 Test Method for Moisture in Wool by Oven-Drying
D1577-01 Test Methods for Linear Density of Textile Fibers
D1578-93R00 Test Method for Breaking Strength of Yarn in Skein Form
D1683-04 Test Method for Failure in Sewn Seams of Woven Apparel Fabrics
D1684-96R02 Practice for Lighting Cotton Classing Rooms for Color Grading
D1770-94R00 Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top
D1776-04 Practice for Conditioning and Testing Textiles
D1777-96R02 Test Method for Thickness of Textile Materials
D1871-04 Test Method for Adhesion Between Tire Bead Wire and Rubber
D1907-01 Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
D1909-04 Table of Commercial Moisture Regains for Textile Fibers
D2050-04 Terminology Relating to Subassemblies
D2051-03 Test Method for Durability of Finish of Zippers to Laundering
D2052-01 Test Method for Colorfastness of Zippers to Drycleaning
D2053-99R04 Test Method for Colorfastness of Zippers to Light
D2054-99R04 Test Method for Colorfastness of Zipper Tapes to Crocking
D2057-01 Test Method for Colorfastness of Zippers to Laundering
D2058-03 Test Method for Durability of Finish of Zippers to Drycleaning
D2059-03 Test Method for Resistance of Zippers to Salt Spray (Fog)
D2060-00R05E01 Test Methods for Measuring Zipper Dimensions
D2061-03 Test Methods for Strength Tests for Zippers
D2062-03 Test Methods for Operability of Zippers
D2102-02 Test Method for Shrinkage of Textile Fibers (Bundle Test)
D2118-05 Practice for Assigning a Standard Commercial Moisture Content for Wool and its' Products
D2130-90R01 Test Method for Diameter of Wool and Other Animal Fibers by Microprojection
D2165-94R00 Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers
D2229-04 Test Method for Adhesion Between Steel Tire Cords and Rubber
D2252-05 Specification for Fineness of Types of Alpaca
D2255-02 Test Method for Grading Spun Yarns for Appearance
D2256-02 Test Method for Tensile Properties of Yarns by the Single-Strand Method
D2257-98R04 Test Method for Extractable Matter in Textiles
D2258-99R05 Practice for Sampling Yarn for Testing
D2259-02 Test Method for Shrinkage of Yarns
D2260-03 Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems
D2261-96R02 Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
D2402-01 Test Method for Water Retention of Textile Fibers (Centrifuge Procedure)
D2462-90R01 Test Method for Moisture in Wool by Distillation With Toluene
D2475-01 Specification for Felt
D2494-02 Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow
D2495-01 Test Method for Moisture in Cotton by Oven-Drying
D2497-01 Tolerances for Manufactured Organic-Base Filament Single Yarns
D2524-95R03 Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method\M 18-in. (3.2-mm) Gage Length
D2525-90R01 Practice for Sampling Wool for Moisture
D2591-01 Test Method for Linear Density of Elastomeric Yarns _Short Length Specimens_
D2594-04 Test Method for Stretch Properties of Knitted Fabrics Having Low Power
D2612-99R05 Test Method for Fiber Cohesion in Sliver and Top (Static Tests)
D2644-02 Tolerances for Yarns Spun on the Woolen System
D2645-95R01 Tolerances for Yarns Spun on the Cotton or Worsted Systems
D2646-05 Test Methods for Backing Fabric Characteristics of Pile Yarn Floor Coverings
D2653-01 Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
D2692-04 Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
D2720-94R00 Practice for Calculation of Commercial Weight and Yield of Scoured Wool, Top, and Noil for Various Commercial Compositions
D2724-03 Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
D2731-01 Test Method for Elastic Properties of Elastomeric Yarns _CRE Type Tensile Testing Machines_
D2812-95R02 Test Method for Non-Lint Content of Cotton
D2816-95R01 Test Method for Cashmere Coarse-Hair Content in Cashmere
D2817-91R01 Specification for Maximum Cashmere Coarse-Hair Content in Cashmere
D2904-97R02 Practice for Interlaboratory Testing of a Textile Test Method that Produces Normally Distributed Data
D2905-97R02 Practice for Statements on Number of Specimens for Textiles
D2906-97R02 Practice for Statements on Precision and Bias for Textiles
D2968-95R01 Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection
D2969-04 Test Methods for Steel Tire Cords
D2970_D2970M-04 Test Methods for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments
D3025-01 Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards
D3106-01 Test Method for Permanent Deformation of Elastomeric Yarns
D3107-03 Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
D3108-01 Test Method for Coefficient of Friction, Yarn to Solid Material
D3135-87R00 Specification for Performance of Bonded, Fused, and Laminated Apparel Fabrics
D3136-04 Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products
D3181-95R02 Guide for Conducting Wear Tests on Textiles
D3217-01A Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
D3218-01 Specification for Polyolefin Monofilaments
D3333-01 Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing
D3374-04 Specification for Vinyl-Coated Glass Yarns
D3412-01 Test Method for Coefficient of Friction, Yarn to Yarn
D3477-00 Performance Specification for Men's and Boys' Woven Dress Shirt Fabrics
D3511-02 Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
D3512-02E01 Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
D3512-02E01 Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
D3513-02 Test Method for Overlength Fiber Content of Manufactured Staple Fiber
D3514-02 Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad
D3562-99 Performance Specification for Woven Drycleanable Coat Fabrics
D3597-02 Performance Specification for Woven Upholstery Fabrics\MPlain, Tufted, or Flocked
D3655-02 Performance Specification for Men's and Women's Sliver Knitted Overcoat and Jacket Fabrics
D3656-04 Specification for Insect Screening and Louver Cloth Woven fromVinyl-Coated Glass Yarns
D3657-03 Specification for Zipper Dimensions
D3690-02 Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics\MIndoor
D3691-02 Performance Specification for Woven, Lace, and Knit Household Curtain and Drapery Fabrics
D3692-89R00 Practice for Selection of Zippers for Care-Labeled Apparel and Household Furnishings
D3693-02 Specification for Labeled Length per Holder of Sewing Thread
D3773-90R02 Test Methods for Length of Woven Fabric
D3774-96R04 Test Method for Width of Textile Fabric
D3775-03A Test Method for Warp End Count and Filling Pick Count of Woven Fabric
D3776-96R02 Test Method for Mass Per Unit Area (Weight) of Fabric
D3777-97R02 Practice for Writing Specifications for Textiles
D3779-02 Performance Specification for Women's and Girls' Woven Rainwear and All-Purpose, Water-Repellent Coat Fabrics
D3780-02 Performance Specification for Men's and Boys' Woven Dress Suit Fabrics and Woven Sportswear Jacket, Slack, and Trouser Fabrics
D3781-02 Performance Specification for Men's and Boys' Knitted Rainwear and All-Purpose, Water-Repellent Coat Fabrics
D3782-02 Performance Specification for Men's and Boys' Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics
D3783-02 Performance Specification for Woven Flat Lining Fabrics for Men's and Boys' Apparel
D3784-02 Performance Specification for Men's and Boys' Woven Bathrobe and Dressing Gown Fabrics
D3785-02 Performance Specification for Woven Necktie and Scarf Fabrics
D3786-01 Test Method for Hydraulic Bursting Strength of Textile Fabrics\MDiaphragm Bursting Strength Tester Method
D3787-01 Test Method for Bursting Strength of Textiles\MConstant-Rate-of-Traverse (CRT) Ball Burst Test
D3819-02 Performance Specification for Men's and Boys' Woven Pajama Fabrics
D3820-02 Performance Specification for Men's and Boys' Woven Underwear Fabrics
D3822-01 Test Method for Tensile Properties of Single Textile Fibers
D3823-01 Practice for Determining Ticket Numbers for Sewing Threads
D3882-99 Test Method for Bow and Skew in Woven and Knitted Fabrics
D3883-04 Test Methods for Yarn Crimp and Yarn Take-up in Woven Fabrics
D3884-01E01 Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
D3885-04 Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
D3886-99 Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)
D3887-96R04 Specification for Tolerances for Knitted Fabrics
D3888-95R01 Terminology Relating to Open-End Spinning
D3936-05 Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
D3937-01 Test Method for Crimp Frequency of manufactured Staple Fibers
D3938-00 Guide for Determining or Confirming Care Instructions for Apparel and Other Textile Products
D3939-03R04 Test Method for Snagging Resistance of Fabrics (Mace)
D3990-99R04 Terminology Relating to Fabric Defects
D3991-94R00 Specifications for Fineness of Wool or Mohair and Assignment of Grade
D3992-94R00 Specifications for Fineness of Wool Top or Mohair Top and Assignment of Grade
D3994-02 Performance Specification for Woven Swimwear Fabrics
D3995-02 Performance Specification for Men's and Women's Knitted Career Apparel Fabrics: Dress and Vocational
D3996-02 Performance Specification for Knit Swimwear Fabrics
D4028-96R02 Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn
D4029-04 Specification for Finished Woven Glass Fabrics
D4030-04 Specification for Glass Fiber Cord and Sewing Thread
D4031-01 Test Method for Bulk Properties of Textured Yarns
D4032-94R01 Test Method for Stiffness of Fabric by the Circular Bend Procedure
D4035-02 Performance Specification for Knitted Necktie and Scarf Fabrics
D4037-02 Performance Specification for Woven, Knitted, or Flocked Bedspread Fabrics
D4038 Performance Specification for Women's and Girls' Woven Dress and Blouse Fabrics
D4109-02 Performance Specification for Men's and Boys' Woven Coverall, Dungaree, Overall, and Shop-Coat Fabrics
D4110-02 Performance Specification for Men's and Boys' Knitted Bathrobe, Dressing Gown, and Pajama Fabrics
D4111-02 Performance Specification for Woven Napery and Tablecloth Fabrics: Household and Institutional
D4112-02 Performance Specification for Woven Umbrella Fabrics
D4113-02 Performance Specification for Woven Slipcover Fabrics
D4114-02 Performance Specification for Woven Flat Lining Fabrics for Women's and Girls' Apparel
D4115-02 Performance Specification for Women's and Girls' Knitted and Woven Dress Glove Fabrics
D4116-01 Performance Specification for Women's and Girls' Knitted and Woven Corset-Girdle-Combination Fabrics
D4117-01 Performance Specification for Women's and Girls' Woven Robe, Negligee, Nightgown, Pajama, Slip, and Lingerie Fabrics
D4118-01 Performance Specification for Women's Woven Coverall, Dungaree, Overall, and Shop Coat Fabrics
D4119-01 Performance Specification for Men's and Boys' Knitted Dress Shirt Fabrics
D4120-01 Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests
D4151-92R01 Test Method for Flammability of Blankets
D4153-01 Performance Specification for Men's, Women's, and Children's Woven Handkerchief Fabrics
D4154-01 Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics
D4155-01 Performance Specification for Women's and Girls' Woven Sportswear, Shorts, Slacks, and Suiting Fabrics
D4156-01 Performance Specification for Women's and Girls' Knitted Sportswear Fabrics
D4157-02 Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)
D4158-01 Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
D4231-01 Practice for Evaluation of Launderable Woven Dress Shirts and Sports Shirts
D4232-01 Performance Specification for Men's and Women's Dress and Vocational Career Apparel Fabrics
D4233-01 Performance Specification for Women's and Girls' Knitted and Woven Brassiere Fabrics
D4234-01 Performance Specification for Women's and Girls' Knitted Robe, Negligee, Nightgown, Pajama, Slip, and Lingerie Fabrics
D4235-01 Performance Specification for Women's and Girls' Knitted Blouse and Dress Fabrics
D4268 Test Methods for Testing Fiber Ropes
D4270-95R01 Guide for Using Existing Practices in Developing and Writing Test Methods
D4271-88R01 Practice for Writing Statements on Sampling in Test Methods for Textiles
D4372 Specification for Flame-Resistant Materials Used in Camping Tentage
D4389-04 Specification for Finished Glass Fabrics Woven From Rovings
D4391-93AR00 Terminology Relating to The Burning Behavior of Textiles
Volume 07.02, November 2005
Textiles (II): D 4393 - latest
D4393-04 Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds
D4465-97 Performance Specification for Zippers for Denim Dungarees
D4466-02 Terminology for Multicomponent Textile Fibers
D4467-94R01 Practice for Interlaboratory Testing of a Textile Test Method That Produces Non-Normally Distributed Data
D4510-93R00 Test Method for Counting Particle Cleavages in Wool and Other Animal Fibers
D4522-04 Performance Specification for Feather and Down Fillings for Textile Products
D4523 Terminology Relating to Feather-Filled and Down-Filled Products
D4524-86R00 Test Method for Composition of Plumage
D4604 Test Methods for Measurement of Cotton Fibers by High Volume Instruments (HVI) (Motion Control Fiber Information System)
D4686-91R03 Guide for Identification and Transformation of Frequency Distributions
D4697-95R01 Guide for Maintaining Test Methods in the User's Laboratory
D4720-87R00 Practice for Evaluation of the Performance of Soft Window Coverings
D4721-89R00 Practice for Evaluation of the Performance of Machine Washable and Drycleanable Bedcoverings and Accessories
D4723-99 Index of and Descriptions of Textile Heat and Flammability Test Methods and Performance Specifications
D4724-99R05 Test Method for Entanglements in Filament Yarns by Needle Insertion
D4769-88R00 Specification for Woven and Warp Knitted Comforter Fabrics
D4770-00 Test Method for the Evaluation of Manmade Fiber Batting Used as Filling in Outerwear Apparel
D4771-02 Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture
D4772-97R04 Test Method for Surface Water Absorption of Terry Fabrics (Water Flow)
D4776-04 Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure
D4845-96R05 Terminology Relating to Wool
D4846-96R04 Test Method for Resistance to Unsnapping of Snap Fasteners
D4847-02 Performance Specification for Woven Awning and Canopy Fabrics
D4848-98R04 Terminology of Force, Deformation and Related Properties of Textiles
D4849-02B Terminology Relating to Yarns and Fibers
D4850-03A Terminology Relating to Fabric
D4851-97R03 Test Methods for Coated and Laminated Fabrics for Architectural Use
D4852-88R00 Practice for Evaluation of Attached Upholstery Fabrics
D4853-97R02 Guide for Reducing Test Variability
D4854-95R01 Guide for Estimating the Magnitude of Variability from Expected Sources in Sampling Plans
D4855-97R02 Practice for Comparing Test Methods
D4910-02 Tables of Body Measurements for Infants, Sizes 0 to 24
D4912-02 Test Method for Fabric Stability of Vinyl-Coated Glass Yarn Insect Screening and Louver Cloth
D4920-98R03 Terminology Relating to Moisture in Textiles
D4963-04 Test Method for Ignition Loss of Glass Strands and Fabrics
D4964-96R04 Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
D4965-96R02 Terminology of Seams and Seam Finishes Used in Home Sewing
D4966-98R04 Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
D4970-02 Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
D4974-04 Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
D4975-04 Test Methods for Single-Filament Tire Bead Wire Made from Steel
D5034-95R01 Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
D5035-95R03 Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
D5038-01 Terminology of Textile Conservation
D5103-01 Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test)
D5104-02 Test Method for Shrinkage of Textile Fibers (Single-Fiber Test)
D5169-98R04 Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
D5170-98R04 Test Method for Peel Strength (|P`T|P' Method) of Hook and Loop Touch Fasteners
D5171-00 Test Method for Impact Resistance of Plastic Sew-Through Flange Buttons
D5219-02 Terminology Relating to Body Dimensions for Apparel Sizing
D5238-98R03 Test Method for Smoldering Combustion Potential of Cotton-Based Batting
D5251-05 Practice for the Operation of the Tetrapod Walker Drum Tester
D5252-05 Practice for the Operation of the Hexapod Tumble Drum Tester
D5253-04 Terminology Relating to Floor Coverings and Textile Upholstered Furniture
D5278-98R04 Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
D5332-00 Test Method for Fiber Length and Length Distribution of Cotton Fibers
D5344-99R05 Test Method for Extension Force of Partially Oriented Yarn
D5362-03R04 Test Method for Snagging Resistance of Fabrics (Bean Bag)
D5378-93R00 Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use
D5417-05 Practice for Operation of the Vettermann Drum Tester
D5426-03 Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints
D5427-03 Practice for Accelerated Aging of Inflatable Restraint Fabrics
D5428-02 Practice for Evaluating the Performance of Inflatable Restraint Modules
D5429-04 Practice for Pretreatment of Backing Fabrics Used in Textile Conservation Research
D5430-04 Test Methods for Visually Inspecting and Grading Fabrics
D5431-93R01E01 Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use
D5432-93R00E01 Performance Specification for Blanket Products for Institutional and Household Use
D5433-00 Performance Specification for Towel Products for Institutional and Household Use
D5446-02 Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints
D5489-01A Guide for Care Symbols for Care Instructions on Textile Products
D5497-94CR00 Terminology Relating to Buttons
D5585-95R01 Table of Body Measurements for Adult Female Misses Figure Type, Sizes 2\N20
D5586-01 Tables of Body Measurements for Women Aged 55 and Older (All Figure Types)
D5587-05 Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
D5591-04 Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
D5646-96R02 Terminology of Basic Sewing Machine Stitches for Home Use
D5647-01 Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus
D5684-04A Terminology Relating to Pile Floor Coverings
D5729-97R04 Test Method for Thickness of Nonwoven Fabrics
D5732-95R01 Test Method for Stiffness of Nonwoven Fabrics Using the Cantilever Test
D5733-99 Test Method for Tearing Strength of Nonwoven Fabrics by the Trapezoid Procedure
D5734-95R01 Test Method for Tearing Strength of Nonwoven Fabrics by Falling-Pendulum (Elmendorf) Apparatus
D5735-95R01 Test Method for Tearing Strength on Nonwoven Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
D5736-95R01 Test Method for Thickness of Highloft Nonwoven Fabrics
D5793-05 Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings
D5807-02A Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions
D5822-03 Test Method for Determining Seam Strength in Inflatable Restraint Cushions
D5823-05 Test Method for Tuft Height of Pile Floor Coverings
D5826-00 Tables of Body Measurements for Children, Sizes 2 to 6x/7
D5848-05 Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
D5866-05 Test Method for Neps in Cotton Fibers (AFIS-N Instrument)
D5867-05 Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
D5908-96R04 Test Method for Resin Binder Distribution and Binder Penetration Analysis of Polyester Nonwoven Fabrics
D6094-97R04 Guide to Assess the Compostability of Environmentally Degradable Nonwoven Fabrics
D6119-05 Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic
D6192-98R04 Tables of Body Measurements for Girls, Sizes 7 to 16
D6193-97R04 Practice for Stitches and Seams
D6197-99R05 Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests
D6207-03 Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
D6240-98 Tables of Body Measurements for Men Sizes Thirty-Four to Sixty (34 to 60) Regular
D6242-98R04 Test Method for Mass Unit Area of Nonwoven Fabrics
D6283-05 Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings
D6320-04 Test Methods for Single Filament Hose Reinforcing Wire Made from Steel
D6321-98R04 Practice for the Evaluation of Machine Washable T-Shirts
D6322-00E01 Guide to International Test Methods Associated with Textile Care Procedures
D6413-99 Test Method for Flame Resistance of Textiles (Vertical Test)
D6458-99 Tables of Body Measurements for Boys, Sizes 8 to 14 Slim and 8 to 20 Regular
D6466-99 Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
D6476-05 Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics
D6477-04 Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
D6478-02 Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
D6479-02 Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
D6500-00 Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyzer
D6540-05 Test Method for Accelerated Soiling of Pile Yarn Floor Covering
D6544-00 Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
D6545-00 Test Method for Flammability of Textiles Used in Children's Sleepwear
D6554-00 Performance Specification for 100 % Cotton Denim Fabrics
D6571-01 Test Method for Determination of Compression Resistance and Recovery Properties of Highloft Nonwoven Fabric Using Static Force Loading
D6587-00 Test Method for Yarn Number Using Automatic Tester
D6588-02 Test Method for Fatigue of Tire Cords (Disc Fatigue Test)
D6603-00 Guide for Labeling of UV-Protective Textiles
D6611-00 Test Method for Wet and Dry Yarn-on-Yarn Abrasion Resistance
D6612-00 Test Method for Yarn Number and Yarn Number Variability Using Automated Tester
D6613-02 Practice for Determining the Presence of Sizing in Nylon or Polyester Fabric
D6614-00 Test Method for Stretch Properties of Textile Fabrics \N CRE Method
D6644-01R02 Test Method for Tension Strength of Sew-Through Flange Buttons
D6650-01 Test Method for Determining the Dynamic Wiping Efficiency, Wet Particle Removal Ability, and Fabric Particle Contribution of Nonwoven Fabrics Used in Cleanrooms
D6651-01 Test Method for Determining The Rate of Sorption and Sorptive Capacity Of Nonwoven Fabrics
D6652-01 Test Method for Determining Fibrous Debris From Nonwoven Fabrics
D6663-01 Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use
D6664-01 Specification for Woven, Knitted and Flocked Bedspread Products for Institutional and Household Use
D6672-01 Practice for Formatting Cutting Data to Drive Numerically Controlled Fabric Cutting Machines
D6673-04 Practice for Sewn Products Pattern Data Interchange\MData Format
D6674-01 Guide for Proficiency Test Program for Fabrics
D6701-01 Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers
D6702-01 Test Method for Determining the Dynamic Wiping Efficiency of Nonwoven Fabrics Not Used in Cleanrooms
D6717-01 Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
D6718-02 Practice for Writing Committee D 13 Standards
D6719-05 Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering
D6720-01 Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method)
D6770-02E01 Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)
D6774-02 Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester
D6775-02E01 Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material
D6797-02 Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
D6798-02 Terminology Relating to Flax and Linen
D6799-05 Terminology Relating to Inflatable Restraints
D6828-02 Test Method for Stiffness of Fabric by the Blade/Slot Procedure
D6829-02 Tables of Body Measurements for Juniors, Sizes 0 to 19
D6840-02 Test Method for Effect of Drycleaning on Buttons
D6859-05 Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings
D6860-03 Tables of Body Measurements for Boys, Sizes 6 to 24 Husky
D6959-03 Practice for Data Exchange Format for Sewn Product Plotting Devices
D6960-04 Table of Body Measurements Relating to Women's Plus Size Figure Type, Sizes 14W\N32W
D6961-03 Test Method for Color Measurement of Flax Fiber
D6962-05 Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings
D6963-04 Terminology Relating to Sewn Products Automation
D7016-04 Test Method for Evaluate Edge Binding Components Used in Mattresses After Exposure to an Open Flame
D7017-05 Performance Specification for Rainwear and All-Purpose, Water-Repellent Coat Fabrics
D7018-04 Terminology Relating to Glass Fiber and Its Products
D7019-05 Performance Specification for Brassiere, Slip, Lingerie and Underwear Fabrics
D7020-05 Performance Specification for Woven Blouse, Dress, Dress Shirt & Sport Shirt Fabrics
D7021-05 Performance Specification for Bathrobe, Dressing Gown, Negligee, Nightgown, and Pajama Fabrics
D7022-04 Terminology Relating to Apparel
D7023-04 Terminology Relating to Home Furnishings
D7024-04 Test Method for Steady State and Dynamic Thermal Performance of Textile Materials
D7025-04AE01 Test Method for Assessing Clean Flax Fiber Fineness
D7076-05 Test Method for Measurement of Shives in Retted Flax
D7139-05 Terminology for Cotton Fibers
Section 08 - Plastics
Volume 08.01, January 2005
Plastics (I): D 256 - D 3159
D0256-05 Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
D0494-04 Test Method for Acetone Extraction of Phenolic Molded or Laminated Products
D0542-00 Test Method for Index of Refraction of Transparent Organic Plastics
D0543-95R01 Practices for Evaluating the Resistance of Plastics to Chemical Reagents
D0570-98 Test Method for Water Absorption of Plastics
D0618-00 Practice for Conditioning Plastics for Testing
D0635-03 Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
D0638-03 Test Method for Tensile Properties of Plastics
D0648-04 Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
D0671 Test Method for Flexural Fatigue of Plastics by Constant-Amplitude-of-Force
D0695-02A Test Method for Compressive Properties of Rigid Plastics
D0696-03 Test Method for Coefficient of Linear Thermal Expansion of Plastics Between \-30|SDC and 30|SDC with a Vitreous Silica Dilatometer
D0704-99R04 Specification for Melamine-Formaldehyde Molding Compounds
D0705-99R04 Specification for Urea-Formaldehyde Molding Compounds
D0706-98 Specification for Cellulose Acetate Molding and Extrusion Compounds
D0707-98 Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds
D0731-95R99 Test Method for Molding Index of Thermosetting Molding Powder
D0732-02 Test Method for Shear Strength of Plastics by Punch Tool
D0746-04 Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
D0747-02 Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
D0785-03 Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
D0787-96R03 Specification for Ethyl Cellulose Molding and Extrusion Compounds
D0788-04 Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
D0789-04 Test Method for Determination of Relative Viscosity of Polyamide (PA)
D0790-03 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
D0792-00 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
D0882-02 Test Method for Tensile Properties of Thin Plastic Sheeting
D0883-00 Terminology Relating to Plastics
D0952-02 Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
D0953-02 Test Method for Bearing Strength of Plastics
D0955-00 Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
D0957-95R00E01 Practice for Determining Surface Temperature of Molds for Plastics
D1003-00 Test Method for Haze and Luminous Transmittance of Transparent Plastics
D1004-03 Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
D1042-01A Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
D1043-02 Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
D1044-99 Test Method for Resistance of Transparent Plastics to Surface Abrasion
D1045-95R01 Test Methods for Sampling and Testing Plasticizers Used in Plastics
D1055-04 Specifications for Flexible Cellular Materials\MLatex Foam
D1056-00 Specification for Flexible Cellular Materials\MSponge or Expanded Rubber
D1201-99R04 Specification for Thermosetting Polyester Molding Compounds
D1203-94R03 Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
D1204-02 Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
D1238-04C Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
D1239-98 Test Method for Resistance of Plastic Films to Extraction by Chemicals
D1242 Test Methods for Resistance of Plastic Materials to Abrasion
D1243-95R00E01 Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
D1248-05 Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
D1249-92R99 Specification for Octyl Ortho-Phthalate Ester Plasticizers
D1430-03 Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics
D1435-05 Practice for Outdoor Weathering of Plastics
D1499-99 Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
D1505-03 Test Method for Density of Plastics by the Density-Gradient Technique
D1525-00 Test Method for Vicat Softening Temperature of Plastics
D1562-98 Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds
D1593-99 Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
D1600-99 Terminology for Abbreviated Terms Relating to Plastics
D1601-99R04 Test Method for Dilute Solution Viscosity of Ethylene Polymers
D1603-01 Test Method for Carbon Black In Olefin Plastics
D1621-04A Test Method for Compressive Properties Of Rigid Cellular Plastics
D1622-03 Test Method for Apparent Density of Rigid Cellular Plastics
D1623-03 Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
D1636-99R04E01 Specification for Allyl Molding Compounds
D1667-97 Specification for Flexible Cellular Materials\MVinyl Chloride Polymers and Copolymers (Closed-Cell Foam)
D1693-01 Test Method for Environmental Stress-Cracking of Ethylene Plastics
D1708-02A Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
D1709-04 Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
D1710-02 Specification for Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and Heavy Walled Tubing
D1712-03 Practice for Resistance of Plastics to Sulfide Staining
D1746-03 Test Method for Transparency of Plastic Sheeting
D1755-92R01 Specification for Poly(Vinyl Chloride) Resins
D1763-00 Specification for Epoxy Resins
D1784-03 Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
D1786-01 Specification for Toluene Diisocyanate
D1790-02 Test Method for Brittleness Temperature of Plastic Sheeting by Impact
D1822-99 Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
D1823-95R01 Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
D1824-95R02 Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
D1894-01 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
D1895-96R03 Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
D1896-99R04 Practice for Transfer Molding Test Specimens of Thermosetting Compounds
D1921-01 Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
D1922-03A Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
D1929-96R01E01 Test Method for Determining Ignition Temperature of Plastics
D1938-02 Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
D1972-97R01 Practice for Generic Marking of Plastic Products
D1996-97R03 Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC)
D1998-04 Specification for Polyethylene Upright Storage Tanks
D2103-03 Specification for Polyethylene Film and Sheeting
D2115-04 Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions
D2116-02 Specification for FEP-Fluorocarbon Molding and Extrusion Materials
D2124-99R04 Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
D2126-04 Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
D2151 Practice for Staining of Poly(Vinyl Chloride) Compositions by Rubber Compounding Ingredients
D2222-94R04 Test Method for Methanol Extract of Vinyl Chloride Resins
D2238-92R04 Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm
D2287-96R01 Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
D2288-97R01 Test Method for Weight Loss of Plasticizers on Heating
D2291-03 Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
D2343-03 Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
D2383-97R01 Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions
D2396-94R04 Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
D2457-03 Test Method for Specular Gloss of Plastic Films and Solid Plastics
D2463-95R01 Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
D2471-99 Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins
D2538-02 Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
D2561-95R01 Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers
D2562-94R02E01 Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics
D2563-94R02E01 Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
D2565-99 Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
D2578-04A Test Method for Wetting Tension of Polyethylene and Polypropylene Films
D2581-02 Classification System for Polybutylene (PB) Plastics Molding and Extrusion Materials
D2582-03 Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
D2583-95R01E01 Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
D2584-02 Test Method for Ignition Loss of Cured Reinforced Resins
D2647-05 Specification for Crosslinkable Ethylene Plastics
D2659-95R01 Test Method for Column Crush Properties of Blown Thermoplastic Containers
D2673-04 Specification for Oriented Polypropylene Film
D2684-95R01 Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products
D2732-03 Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
D2734-94R03 Test Methods for Void Content of Reinforced Plastics
D2741-95R01 Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation
D2765-01 Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
D2838-02 Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
D2839-02 Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
D2842-01 Test Method for Water Absorption of Rigid Cellular Plastics
D2843-99R04E01 Test Method for Density of Smoke from the Burning or Decomposition of Plastics
D2856-94R98 Test Method for Open-Cell Content of Rigid Cellular Plastics by the Air Pycnometer
D2857-95R01 Practice for Dilute Solution Viscosity of Polymers
D2863-00 Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
D2873 Test Method for Interior Porosity of Poly(Vinyl Chloride) (PVC) Resins by Mercury Intrusion Porosimetry
D2911-94R01 Specification for Dimensions and Tolerances for Plastic Bottles
D2923-01 Test Method for Rigidity of Polyolefin Film and Sheeting
D2951-00 Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking
D2990-01 Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
D3012-04 Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
D3013-99R04E01 Specification for Epoxy Molding Compounds
D3014-04A Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
D3016-97R03 Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
D3030-95R00 Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
D3045-92R03 Practice for Heat Aging of Plastics Without Load
D3123-98R04 Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds
D3124-98R03 Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
D3159-04 Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials
Volume 08.02, June 2005
Plastics (II): D 3222 - D 5083
D3222-99 Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
D3275-00 Classification for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
D3291-97R03 Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
D3294-03 Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes
D3295-01 Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
D3296-03 Specification for FEP-Fluorocarbon Tube
D3307-04 Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
D3308-01 Specification for PTFE Resin Skived Tape
D3350-04 Specification for Polyethylene Plastics Pipe and Fittings Materials
D3354-96 Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
D3364-99R04 Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
D3367-98R04 Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
D3368-04 Specification for FEP-Fluorocarbon Sheet and Film
D3369-01 Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film
D3417 Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC)
D3418-03 Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
D3419-00 Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
D3420-95R02 Test Method for Pendulum Impact Resistance of Plastic Film
D3453-01 Specification for Flexible Cellular Materials\MUrethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
D3465-00 Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
D3489-96R00 Test Methods for Rubber\MMicrocellular Urethane
D3574-03 Test Methods for Flexible Cellular Materials\MSlab, Bonded, and Molded Urethane Foams
D3575-00E01 Test Methods for Flexible Cellular Materials Made From Olefin Polymers
D3576-04 Test Method for Cell Size of Rigid Cellular Plastics
D3591-97R03 Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
D3594-93R00 Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
D3595-02 Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
D3596-92R01 Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
D3641-02 Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
D3647-03 Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition
D3675-01 Test Method for Surface Flammability of Flexible Cellular Materials Using A Radiant Heat Energy Source
D3676-01 Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
D3748-03 Practice for Evaluating High-Density Rigid Cellular Plastics
D3749-95R02 Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique
D3763-02 Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
D3768-96R00 Test Method for Microcellular Urethanes\MFlexural Recovery
D3769-96R00 Test Method for Microcellular Urethanes\MHigh-Temperature Sag
D3795-00A Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
D3801-00 Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
D3814-99 Guide for Locating Combustion Test Methods for Polymeric Materials
D3826-98R02 Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
D3835-02 Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
D3846-02 Test Method for In-Plane Shear Strength of Reinforced Plastics
D3851-97R03E01 Specification for Urethane Microcellular Shoe Soling Materials
D3892-93R03 Practice for Packaging/Packing of Plastics
D3895-04 Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
D3914-02 Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
D3915-99AR04 Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications
D3916-02 Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
D3917-96R02E01 Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
D3918-96R03 Terminology Relating to Reinforced Plastic Pultruded Products
D3935-02 Specification for Polycarbonate (PC) Unfilled and Reinforced Material
D3965-04 Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
D3981-03 Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
D4000-04 Classification System for Specifying Plastic Materials
D4001-93R99 Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
D4019 Test Method for Moisture in Plastics by Coulometric Regeneration of Phosphorus Pentoxide
D4020-01A Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
D4065-01 Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
D4066-01A Classification System for Nylon Injection and Extrusion Materials (PA)
D4067-03 Classification System for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
D4092-01 Terminology for Plastics: Dynamic Mechanical Properties
D4093-95R01E01 Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
D4094-00 Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers
D4101-05 Specification for Polypropylene Injection and Extrusion Materials
D4181-00 Classification for Acetal (POM) Molding and Extrusion Materials
D4203-00 Specification for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
D4204-00 Practice for Preparing Plastic Film Specimens for a Round-Robin Study
D4216-03 Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
D4218-96R01 Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
D4225-03 Specification for Styrene-Butadiene Sheeting
D4272-03 Test Method for Total Energy Impact of Plastic Films By Dart Drop
D4273-99 Test Methods for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols
D4274-99 Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols
D4275-02 Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene\NVinyl Acetate (EVA) Copolymers By Gas Chromatography
D4321-04 Test Method for Package Yield of Plastic Film
D4322-96R01E01 Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography
D4329-99 Practice for Fluorescent UV Exposure of Plastics
D4349-96R04 Classification System for Polyphenylene Ether (PPE) Materials
D4350-00 Test Method for Corrosivity Index of Plastics and Fillers
D4357 Specification for Plastic Laminates Made from Woven-Roving and Woven-Yarn Glass Fabrics
D4364-02 Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
D4385-02 Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products
D4396-99AE01 Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
D4397-02 Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
D4440-01 Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology
D4441-04 Specification for Aqueous Dispersions of Polytetrafluoroethylene
D4443-95R02 Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography
D4459-99 Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
D4473-03 Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
D4474-00 Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES)
D4475-02 Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
D4476-03 Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
D4508-04A Test Method for Chip Impact Strength of Plastics
D4509 Test Methods for Determining the 24-Hour Gas (AIR) Space Acetaldehyde Content of Freshly Blown PET Bottles
D4526-96R01E01 Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
D4549-03 Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
D4550 Classification for Thermoplastic Elastomer-Ether-Ester (TEEE)
D4591-01 Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
D4603-03 Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
D4617-03 Classification System for Phenolic Compounds (PF)
D4634-04 Specification for Styrene-Maleic Anhydride Materials (S/MA)
D4635-01 Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
D4659-03 Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
D4660-00 Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate
D4661-03 Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates
D4662-03 Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols
D4663-98R04 Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates
D4669-98R02E01 Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
D4670-97R02 Test Method for Polyurethane Raw Materials: Determination of Suspended Matter In Polyols
D4671-05 Test Methods for Polyurethane Raw Materials: Determination of Unsaturation of Polyols
D4672-00 Test Methods for Polyurethane Raw Materials: Determination of Water Content of Polyols
D4673-02 Classification System for Acrylonitrile\NButadiene\NStyrene (ABS) Plastics and Alloys Molding and Extrusion Materials
D4674-02A Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
D4703-03 Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
D4745-01 Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
D4754-98R03 Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
D4801-95R01E01 Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
D4802-02 Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
D4804-03 Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
D4805 Terminology for Plastics Standards
D4812-99 Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
D4819-96R05 Specification for Flexible Cellular Materials Made From Polyolefin Plastics
D4875-99 Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
D4876 Test Method for Polyurethane Raw Materials: Determination of Acidity of Crude or Modified Isocyanates
D4877-04 Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates
D4878-03 Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
D4883-03 Test Method for Density of Polyethylene by the Ultrasound Technique
D4889-04 Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
D4890-98R03 Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols
D4894-04 Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
D4895-04 Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
D4923-01 Specification for Reinforced Thermosetting Plastic Poles
D4968-02 Guide for Annual Review of Test Methods and Specifications for Plastics
D4969-02 Specification for Polytetrafluoroethylene\N(PTFE) Coated Glass Fabric
D4976-04A Specification for Polyethylene Plastics Molding and Extrusion Materials
D4986-03 Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
D5017-96R03E01 Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
D5021-00 Specification for Thermoplastic Elastomer\NChlorinated Ethylene Alloy (TECEA)
D5023-01 Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
D5024-01 Test Method for Plastics: Dynamic Mechanical Properties: In Compression
D5025-99 Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
D5026-01 Test Method for Plastics: Dynamic Mechanical Properties: In Tension
D5028-96R03 Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
D5033-00 Guide for Development of ASTM Standards Relating to Recycling and Use of Recycled Plastics
D5045-99 Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
D5047-95R03 Specification for Polyethylene Terephthalate Film and Sheeting
D5048-03 Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
D5071-99 Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
D5083-02 Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
Volume 08.03, July 2005
Plastics (III): D 5117 - latest
D5117-03 Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
D5132-04 Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
D5138-99A Specification for Liquid Crystal Polymers
D5155-01 Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates
D5203-02 Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources
D5204-03 Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
D5205-96R03 Classification System for Polyetherimide (PEI) Materials
D5207-03 Practice for Confirmation of 20\Nmm (50\NW) and 125\Nmm (500\NW) Test Flames for Small-Scale Burning Tests on Plastic Materials
D5208-01 Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
D5210-92R00 Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge
D5224-00 Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
D5225-98R03 Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
D5226-98R03 Practice for Dissolving Polymer Materials
D5227-01 Test Method for Measurement of Hexane Extractable Content of Polyolefins
D5260-04 Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
D5271-02 Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System
D5272-92R99 Practice for Outdoor Exposure Testing of Photodegradable Plastics
D5279-01 Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
D5296-05 Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
D5318 Test Method for Hydrolyzable Chloride in Peroxy Esters and Peroxy Dicarbonates
D5336-03 Specification for Polyphthalamide (PPA) Injection Molding Materials
D5338-98R03 Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions
D5418-01 Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
D5419-95R03 Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
D5420-04 Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
D5422-03 Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
D5436-03 Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
D5476-99 Classification System for Thermoplastic Polyurethane Materials (TPU)
D5477-02 Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
D5491-03 Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
D5492-98R03E01 Test Method for Determination of Xylene Solubles in Propylene Plastics
D5507-99 Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
D5508-94AR01E01 Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
D5509 Practice for Exposing Plastics to a Simulated Compost Environment
D5510-94R01 Practice for Heat Aging of Oxidatively Degradable Plastics
D5511-02 Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
D5512 Practice for Exposing Plastics to a Simulated Compost Environment Using an Externally Heated Reactor
D5523-04 Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates
D5524-94R01E01 Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography
D5525 Practice for Exposing Plastics to a Simulated Active Landfill Environment
D5526-94R02 Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
D5575-99R03 Specification for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
D5576-00 Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
D5577-94R03 Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
D5592-94R02E01 Guide for Material Properties Needed in Engineering Design Using Plastics
D5593-99E01 Classification for Thermoplastic Elastomers\MOlefinic (TEO)
D5594-98R04 Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
D5628-96R01E01 Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
D5629-05 Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
D5630-01 Test Method for Ash Content in Plastics
D5672-03 Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique
D5675-04 Classification for Fluoropolymer Micropowders
D5676 Specification for Recycled Polystyrene Molding and Extrusion Materials
D5740-03 Guide for Writing Material Standards in the Classification D 4000 Format
D5814-02 Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
D5815-95R01E01 Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatography (LC)
D5857-05 Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
D5870-95R03 Practice for Calculating Property Retention Index of Plastics
D5927-03 Specification for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
D5930-01 Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
D5934-02 Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
D5946-04 Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
D5947-03 Test Methods for Physical Dimensions of Solid Plastics Specimens
D5948-05 Specification for Molding Compounds, Thermosetting
D5951-96R02 Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing
D5988-03 Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting
D5989-03 Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)
D5990-00 Classification System for Polyketone Injection Molding and Extrusion Materials (PK)
D5991-96R02 Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
D5998-03 Specification for Molded Polyethylene Shipping and Storage Drums
D6002-96R02E01 Guide for Assessing the Compostability of Environmentally Degradable Plastics
D6003 Test Method for Determining Weight Loss From Plastic Materials Exposed to Simulated Municipal Solid-Waste (MSW) Aerobic Compost Environment
D6040-01 Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D6042-04 Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)
D6068-96R02E01 Test Method for Determining J-R Curves of Plastic Materials
D6098-97R03 Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
D6099-03 Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
D6100-03 Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (POM)
D6108-03 Test Method for Compressive Properties of Plastic Lumber and Shapes
D6109-05 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
D6110-04E01 Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
D6111-03 Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
D6112-97 Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
D6117-97 Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
D6150-97R03 Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
D6226-98E01 Test Method for Open Cell Content of Rigid Cellular Plastics
D6247-98R04 Test Method for Analysis of Elemental Content in Polyolefins By X-ray Fluorescence Spectrometry
D6248-98R04 Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
D6260 Test Method for Gravimetric Determination of Carbon Black in Nylon Materials (PA)
D6261-98R03 Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
D6262-98R03 Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
D6263-98R03 Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
D6265-98R03 Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test
D6272-02 Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
D6287-05 Practice for Cutting Film and Sheeting Test Specimens
D6288-98R03 Practice for Separation and Washing of Recycled Plastics Prior to Testing
D6289-03 Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
D6290-98E01 Test Method for Color Determination of Plastic Pellets
D6314 Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials
D6338-03 Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs)
D6339-05 Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)
D6340-98 Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment
D6341-98 Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between \N30 and 140|SDF (\N34.4 and 60|SDC)
D6342-98R03 Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
D6358-99 Classification System for Poly (Phenylene Sulfide) Injection Molding and Extrusion Materials Using ISO Methods
D6360-99 Practice for Enclosed Carbon-Arc Exposures of Plastics
D6394-03 Specification for Sulfone Plastics (SP)
D6395-99 Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
D6400-04 Specification for Compostable Plastics
D6435-99 Test Method for Shear Properties of Plastic Lumber and Plastic Lumber Shapes
D6436-02 Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
D6437-05 Test Method for Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)
D6456-99R04 Specification for Finished Parts Made from Polyimide Resin
D6457-04 Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)
D6474-99 Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
D6576-00 Specification for Flexible Cellular Rubber Chemically Blown
D6585-00 Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D6645-01 Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
D6662-01 Specification for Polyolefin-Based Plastic Lumber Decking Boards
D6691-01 Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium
D6692-01 Test Method for Determining the Biodegradability of Radiolabeled Polymeric Plastic Materials in Seawater
D6712-01 Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
D6713-01 Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
D6776-02 Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials in a Laboratory-Scale Simulated Landfill Environment
D6778-03 Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials
D6779-05 Classification System for Polyamide Molding and Extrusion Materials (PA)
D6835-02 Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
D6852-02 Guide for Determination of Biobased Content, Resources Consumption, and Environmental Profile of Materials and Products
D6865-04 Classification System for Acrylonitrile\NStyrene\NAcrylate (ASA) and Acrylonitrile\NEPDM\NStyrene (AES) Plastics and Alloys Molding and Extrusion Materials
D6866-05 Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
D6867-03 Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
D6868-03 Specification for Biodegradable Plastics Used as Coatings on Paper and Other Compostable Substrates
D6869-03 Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
D6953-03 Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
D6954-04 Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
D6979-03 Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen
D6980-04 Test Method for Determination of Moisture in Plastics by Loss in Weight
D6988-03 Guide for Determination of Thickness of Plastic Film Test Specimens
D7026-04 Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis
D7029-04 Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0|SDF \[82.2|SDC\]
D7075-04 Practice for Evaluating and Reporting Environmental Performance of Biobased Products
D7082-04 Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
D7083-04 Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
D7107-04 Test Method for Creep Measurement of Self-Lubricating Bushings
PS106-01 Provisional Standard Specification for Rods and Tubes of Polyethylene (PE)
Volume 08.04, January 2005
Plastic Pipe and Building Products
C0581-03 Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
C0582-02 Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
D1494-97R01 Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
D1527-99E01 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
D1598-02 Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
D1599-99E01 Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
D1694-95R00 Specification for Threads 60|SD (Stub) for |P`Fiberglass'' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D1785-04A Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
D2104-03 Specification for Polyethylene (PE) Plastic Pipe, Schedule 40
D2105-01 Test Method for Longitudinal Tensile Properties of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
D2122-98R04 Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
D2143-00 Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
D2152-95R03 Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
D2235-04 Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
D2239-03 Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
D2241-04B Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
D2282-99E01 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
D2290-04 Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
D2310-01 Classification for Machine-Made |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2321-00 Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
D2412-02 Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
D2444-99 Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
D2447-03 Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter
D2464-99E01 Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2466-02 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
D2467-04E01 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2468 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40
D2513-04A Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
D2517-00E01 Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
D2564-04 Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
D2609-02 Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
D2657-03 Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
D2661-02 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
D2662 Specification for Polybutylene (PB) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
D2665-04A Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
D2666-96A Specification for Polybutylene (PB) Plastic Tubing
D2672-96AR03 Specification for Joints for IPS PVC Pipe Using Solvent Cement
D2680-01 Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
D2683-04 Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
D2729-03 Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
D2737-03 Specification for Polyethylene (PE) Plastic Tubing
D2749-02 Symbols for Dimensions of Plastic Pipe Fittings
D2751-96A Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
D2774-04 Practice for Underground Installation of Thermoplastic Pressure Piping
D2837-04 Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
D2846_D2846M-99E01 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
D2852-95R02 Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
D2855-96R02 Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
D2924-01 Test Method for External Pressure Resistance of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2925-01 Test Method for Beam Deflection of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
D2949-01AE01 Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
D2992-01 Practice for Obtaining Hydrostatic or Pressure Design Basis for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
D2996-01 Specification for Filament-Wound |P`Fiberglass'' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2997-01 Specification for Centrifugally Cast |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D3000 Specification for Polybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter
D3034-04A Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
D3035-03A Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
D3122-95R02 Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
D3138-04 Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
D3139-98 Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
D3212-96AR03E01 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
D3261-03 Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
D3262-04 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
D3299-00 Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D3309-96AR02 Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems
D3311-02E01 Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
D3517-04 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
D3567-97R02 Practice for Determining Dimensions of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
D3678-97R01 Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
D3679-04A Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
D3681-01E01 Test Method for Chemical Resistance of |P`Fiberglass|P' (Glass\NFiber\NReinforced Thermosetting-Resin) Pipe in a Deflected Condition
D3753-99 Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
D3754-04 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
D3839-02E01 Guide for Underground Installation of |P`Fiberglass|P' (Glass-FiberReinforced Thermosetting-Resin) Pipe
D3840-01 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
D3841-97R01 Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
D3982-03 Specification for Contact Molded |P`Fiberglass|P' (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods
D4024-00 Specification for Machine Made |P`Fiberglass'' (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D4068-01 Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
D4097-01 Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D4161-01 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
D4166-99R04E01 Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument
D4167-97R02 Specification for Fiber-Reinforced Plastic Fans and Blowers
D4226-00 Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
D4398-02 Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure
D4477-04A Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
D4495-00 Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
D4551-96R01 Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
D4726-02 Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
D4756-03 Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
D4803-97R02E01 Test Method for Predicting Heat Buildup in PVC Building Products
D5140 Guide for Testing Polyurethane |P`Poured in Place|P' Thermal Break Materials
D5206-96R02E01 Test Method for Windload Resistance of Rigid Poly(Vinyl Chloride) (PVC) Siding
D5319-97R01 Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
D5364-93R02 Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units
D5365-01E01 Test Method for Long-Term Ring-Bending Strain of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D5421-00 Specification for Contact Molded |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D5677-00 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
D5685-02 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
D5686 Specification for |P`Fiberglass|P'(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type Epoxy Resin, for Condensate Return Lines
D5813-04 Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
D5926-04 Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
D6041-97R02 Specification for Contact-Molded |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
D6777-02 Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding
D6783-03 Specification for Polymer Concrete Pipe
D6864-03AE01 Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
F0402-93R99 Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
F0405-97 Specification for Corrugated Polyethylene (PE) Pipe and Fittings
F0409-02 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
F0412-01AE01 Terminology Relating to Plastic Piping Systems
F0423 Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
F0437-99 Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
F0438-04 Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
F0439-02E01 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
F0441_F0441M-02 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
F0442_F0442M-99 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR\NPR)
F0449-02E01 Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
F0477-02E01 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
F0480-02 Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
F0481-97R02 Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
F0491 Specification for Poly(Vinylidene Fluoride) (PVDF) Plastic-Lined Ferrous Metal Pipe and Fittings
F0492 Specification for Propylene and Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings
F0493-04 Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
F0512-95R01E01 Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
F0545 Specification for PVC and ABS Injected Solvent Cemented Plastic Pipe Joints
F0546 Specification for Perfluoro (Ethylene-Propylene) Copolymer (FEP) Plastic-Lined Ferrous Metal Pipe and Fittings
F0585-94R00 Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
F0599 Specification for Poly(Vinylidene Chloride) (PVDC) Plastic-Lined Ferrous Metal Pipe and Fittings
F0610_F0610M-00A Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
F0628-01 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
F0645-04 Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
F0656-02 Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
F0667-97 Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings
F0679-03 Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
F0689-97R04 Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
F0690-86R03E02 Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
F0699-00E01 Practice for Accelerated Conditioning of Polybutylene Pipe and Tubing for Subsequent Quality Control Testing
F0714-03 Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
F0725-03E01 Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
F0758-95R00 Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
F0771-99E01 Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
F0781 Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings
F0789 Specification for Type PS-46 and Type PS-115 Poly(Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings
F0794-03 Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
F0810-01 Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
F0845 Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing
F0876-04 Specification for Crosslinked Polyethylene (PEX) Tubing
F0877-02A Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
F0878 Specification For Polybuteylene (PB) Thermoplastic Thin-Wall Drip Irrigation Tubing
F0891-04 Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
F0892 Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings
F0894-98A Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
F0905-04 Practice for Qualification of Polyethylene Saddle-Fused Joints
F0913-02 Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
F0948-94R01E01 Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
F0949-03 Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
F1025-94R00 Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
F1041-02 Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
F1055-98E01 Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
F1056-04 Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
F1057-87R00 Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
F1176-01E01 Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi
F1216-03 Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
F1248-96R02E01 Test Method for Determination of Environmental Stress Crack Resistance (ESCR) of Polyethylene Pipe
F1281-03 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
F1282-03 Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
F1290-98AR04 Practice for Electrofusion Joining Polyolefin Pipe and Fittings
F1335-04 Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service
F1336-02 Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
F1365-91R99E01 Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
F1380-95AR02E01 Specification for Metal Insert Fittings for Polybutylene (PB) Tubing
F1412-01E01 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
F1417-92R98 Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
F1429-99 Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
F1473-01E01 Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
F1474 Test Method for Slow Crack Growth Resistance of Notched Polyethylene Plastic Pipe
F1483-98 Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
F1488-03 Specification for Coextruded Composite Pipe
F1498-00E01 Specification for Taper Pipe Threads 60|SD for Thermoplastic Pipe and Fittings
F1499-01 Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
F1504-02 Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
F1533-01 Specification for Deformed Polyethylene (PE) Liner
F1545-97R03 Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
F1563-01 Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
F1588-96R02 Test Method for Constant Tensile Load Joint Test (CTLJT)
F1589 Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe
F1606 Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
F1668-96R02 Guide for Construction Procedures for Buried Plastic Pipe
F1673-04 Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
F1674-96 Test Method for Joint Restraint Products for Use with PVC Pipe
F1675-03 Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
F1697-02 Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
F1698-02 Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
F1732-96 Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
F1733-96R02 Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
F1734-03 Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
F1735-02E01 Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
F1741-02A Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
F1743-96R03 Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
F1759-97R04 Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
F1760-01 Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
F1802-04 Test Method for Performance Testing of Excess Flow Valves
F1803-04 Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
F1804-03 Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation\t
F1807-04 Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
F1865-02A Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
F1866-98 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
F1867-98R04 Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
F1871-02 Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
F1901-98R04 Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
F1924-01E01 Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
F1947-04 Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
F1948-99AE01 Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
F1960-04 Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
F1961-02A Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
F1962-99 Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
F1970-01 Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
F1973-02 Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems
F1974-04 Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
F1986-01 Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
F1987-01 Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
F2018-00E01 Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
F2019-03 Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
F2021-00 Specification for Design and Installation of Plastic Syphonic Roof Drainage Systems
F2023-04 Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
F2080-04 Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
F2098-04 Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings
F2135-01 Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
F2136-01E01 Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
F2138-01E01 Specification for Excess Flow Valves for Natural Gas Service
F2145-01 Specification for Polyamide 11 (PA 11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and Tubing
F2158-01 Specification for Residential Central-Vacuum Tube and Fittings
F2159-03E01 Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
F2160-01 Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
F2164-02 Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
F2165-02 Specification for Flexible Pre-Insulated Piping
F2176-02 Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
F2206-02 Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
F2207-02 Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
F2231-02E01 Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
F2262-03 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
F2263-03 Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
F2307-03 Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
F2330-04 Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water
F2331-04 Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic Threaded Pipe and Fittings Materials
F2389-04 Specification for Pressure-rated Polypropylene (PP) Piping Systems
F2418-04 Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
Section 09 - Rubber
Volume 09.01, January 2005
Rubber, Natural and Synthetic -- General Test Methods; Carbon Black
D0297-93R02E01 Test Methods for Rubber Products\MChemical Analysis
D0395-03 Test Methods for Rubber Property\MCompression Set
D0412-98AR02E01 Test Methods for Vulcanized Rubber and Thermoplastic Elastomers\MTension
D0413-98R02E01 Test Methods for Rubber Property\MAdhesion to Flexible Substrate
D0429-03 Test Methods for Rubber Property\MAdhesion to Rigid Substrates
D0430-95R00 Test Methods for Rubber Deterioration\MDynamic Fatigue
D0454-04 Test Method for Rubber Deterioration by Heat and Air Pressure
D0471-98E01 Test Method for Rubber Property\MEffect of Liquids
D0518-99 Test Method for Rubber Deterioration\MSurface Cracking
D0531-00R05 Test Method for Rubber Property\MPusey and Jones Indentation
D0572-04 Test Method for Rubber\MDeterioration by Heat and Oxygen
D0573-04 Test Method for Rubber\MDeterioration in an Air Oven
D0575-91R01 Test Methods for Rubber Properties in Compression
D0623-99 Test Methods for Rubber Property\MHeat Generation and Flexing Fatigue In Compression
D0624-00E01 Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
D0750-00 Test Method for Rubber Deterioration in Carbon\MArc Weathering Apparatus
D0813-95R00 Test Method for Rubber Deterioration\MCrack Growth
D0814-95R05 Test Method for Rubber Property\MVapor Transmission of Volatile Liquids
D0816-82R01 Test Methods for Rubber Cements
D0832-92R01E01 Practice for Rubber Conditioning For Low Temperature Testing
D0865-99R05 Test Method for Rubber\MDeterioration by Heating in Air (Test Tube Enclosure)
D0925-88R00 Test Methods for Rubber Property\MStaining of Surfaces (Contact, Migration, and Diffusion)
D0926-04 Test Method for Rubber Property\MPlasticity and Recovery (Parallel Plate Method)
D0945-92R01E01 Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
D0991-89R05 Test Method for Rubber Property\MVolume Resistivity Of Electrically Conductive and Antistatic Products
D1052-05 Test Method for Measuring Rubber Deterioration\MCut Growth Using Ross Flexing Apparatus
D1053-92AR01E01 Test Methods for Rubber Property\MStiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
D1054-02 Test Method for Rubber Property\MResilience Using a Goodyear-Healey Rebound Pendulum
D1076-02 Specification for Rubber\MConcentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
D1148-95R01 Test Method for Rubber Deterioration\MHeat and Ultraviolet Light Discoloration of Light-Colored Surfaces
D1149-99 Test Method for Rubber Deterioration\MSurface Ozone Cracking in a Chamber
D1171-99 Test Method for Rubber Deterioration\MSurface Ozone Cracking Outdoors or Chamber (Triangular Specimens)
D1229-03 Test Method for Rubber Property\MCompression Set at Low Temperatures
D1278-91AR02E01 Test Methods for Rubber from Natural Sources\MChemical Analysis
D1329-02 Test Method for Evaluating Rubber Property\MRetraction at Lower Temperatures (TR Test)
D1349-99 Practice for Rubber\MStandard Temperatures For Testing
D1415-88R04 Test Method for Rubber Property\MInternational Hardness
D1417-03A Test Methods for Rubber Latices\MSynthetic
D1418-05 Practice for Rubber and Rubber Latices\MNomenclature
D1456-86R01 Test Method for Rubber Property\MElongation at Specific Stress
D1460-86R01 Test Method for Rubber Property\MChange in Length During Liquid Immersion
D1485-86R02 Test Methods for Rubber from Natural Sources\MSampling and Sample Preparation
D1506-99 Test Methods for Carbon Black\MAsh Content
D1508-02E02 Test Method for Carbon Black, Pelleted Fines and Attrition
D1509-95R00 Test Methods for Carbon Black\MHeating Loss
D1510-03 Test Method for Carbon Black\MIodine Adsorption Number
D1511-00E02 Test Method for Carbon Black\MPellet Size Distribution
D1512-95R00 Test Methods for Carbon Black\MpH Value
D1513-05 Test Method for Carbon Black, Pelleted\MPour Density
D1514-04 Test Method for Carbon Black\MSieve Residue
D1519-95R04E01 Test Methods for Rubber Chemicals\MDetermination of Melting Range
D1566-05A Terminology Relating to Rubber
D1618-99R04 Test Method for Carbon Black Extractables\MTransmittance of Toluene Extract
D1619-03 Test Methods for Carbon Black\MSulfur Content
D1630-94R00 Test Method for Rubber Property\MAbrasion Resistance (Footwear Abrader)
D1646-04 Test Methods for Rubber\MViscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
D1765-05 Classification System for Carbon Blacks Used in Rubber Products
D1766-01 Test Method for Rubber Chemicals\MSolubility
D1799-03A Practice for Carbon Black\MSampling Packaged Shipments
D1817-01E01 Test Method for Rubber Chemicals\MDensity
D1900-94R02 Practice for Carbon Black\MSampling Bulk Shipments
D1917-03 Test Methods for Rubber Property\MShrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)
D1937-05 Test Method for Carbon Black, Pelleted\MMass Strength
D1991-96R01 Test Method for Rubber Chemicals\M2-Mercaptobenzothiazole (MBT)\MAssay
D1992-91R01 Guide for Testing Synthetic Plasticizers Used in Rubber
D1993-03 Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
D2084-01 Test Method for Rubber Property\MVulcanization Using Oscillating Disk Cure Meter
D2136-02 Test Method for Coated Fabrics\MLow-Temperature Bend Test
D2137-94R00 Test Methods for Rubber Property\MBrittleness Point of Flexible Polymers and Coated Fabrics
D2226-93R02 Classification for Various Types of Petroleum Oils for Rubber Compounding Use
D2227-96R02 Specification for Natural Rubber (NR) Technical Grades
D2228-04E01 Test Method for Rubber Property\MRelative Abrasion Resistance by Pico Abrader Method
D2230-96R02 Test Method for Rubber Property\MExtrudability of Unvulcanized Compounds
D2240-04E01 Test Method for Rubber Property\MDurometer Hardness
D2414-05 Test Method for Carbon Black\MOil Absorption Number (OAN)
D2449-88R01 Specification for Rubber Bales From Natural Sources\MLimit on Coating
D2632-01 Test Method for Rubber Property\MResilience by Vertical Rebound
D2663-95AR00 Test Methods for Carbon Black\MDispersion in Rubber
D2702-05 Practice for Rubber Chemicals\MDetermination of Infrared Absorption Characteristics
D3053-04B Terminology Relating to Carbon Black
D3137-81R01 Test Method for Rubber Property\MHydrolytic Stability
D3156-96R01 Practice for Rubber\MChromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
D3157-05 Test Method for Rubber from Natural Sources\MColor
D3182-89R01E01 Practice for Rubber\MMaterials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
D3183-02 Practice for Rubber\MPreparation of Pieces for Test Purposes from Products
D3184-89R01 Test Methods for Rubber\MEvaluation of NR (Natural Rubber)
D3185-99 Test Methods for Rubber\MEvaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
D3186-97R02 Test Methods for Rubber\MEvaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil
D3187-00 Test Methods for Rubber\MEvaluation of NBR (Acrylonitrile-Butadiene Rubber)
D3188-00 Test Methods for Rubber\MEvaluation of IIR (Isobutene-Isoprene Rubber)
D3189-99 Test Methods for Rubber\MEvaluation of Solution BR (Polybutadiene Rubber)
D3190-00 Test Method for Rubber\MEvaluation of Chloroprene Rubber (CR)
D3191-02 Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)\MRecipe and Evaluation Procedures
D3192-02 Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
D3194-04 Test Method for Rubber From Natural Sources\MPlasticity Retention Index (PRI)
D3265-03 Test Method for Carbon Black\MTint Strength
D3313-04 Test Method for Carbon Black\MIndividual Pellet Hardness
D3314-02 Test Method for Rubber\MChemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
D3324 Practice for Carbon Black\MImproving Test Reproducibility Using ASTM Standard Reference Blacks
D3346-03 Test Methods for Rubber Property\MProcessability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)
D3395-99 Test Methods for Rubber Deterioration\MDynamic Ozone Cracking in a Chamber
D3403-97R02 Test Methods for Rubber\MEvaluation of IR (Isoprene Rubber)
D3452-93R02 Practice for Rubber\MIdentification by Pyrolysis-Gas Chromatography
D3484-97R02 Test Methods for Rubber\MEvaluation of Oil-Extended Solution BR (Polybutadiene Rubber)
D3493-04A Test Method for Carbon Black\MOil Absorption Number of Compressed Sample (COAN)
D3533-90R01 Test Method for Rubber\MNitrogen Content
D3566-03 Practice for Rubber\MDetermination of Bromine in the Presence of Chlorine by Oxygen Combustion
D3568-03 Test Methods for Rubber\MEvaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
D3616-95R04E01 Test Method for Rubber\MDetermination of Gel, Swelling Index, and Dilute Solution Viscosity
D3629-99 Test Method for Rubber Property\MCut Growth Resistance
D3677-00R04 Test Methods for Rubber\MIdentification by Infrared Spectrophotometry
D3765-04 Test Method for Carbon Black\MCTAB (Cetyltrimethylammonium Bromide) Surface Area
D3767-03 Practice for Rubber\MMeasurement of Dimensions
D3847-01 Practice for Rubber\MDirections for Achieving Subnormal Test Temperatures
D3848-03 Test Methods for Rubber\MEvaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black
D3849-04 Test Method for Carbon Black\MMorphological Characterization of Carbon Black Using Electron Microscopy
D3853-03E01 Terminology Relating to Rubber and Rubber Latices\MAbbreviations for Chemicals Used in Compounding
D3896-85R01 Practice for Rubber From Synthetic Sources\MSampling
D3900-95R04E01 Test Methods for Rubber\MDetermination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
D3958-00 Test Methods for Rubber\MEvaluation of BIIR and CIIR (Halogenated Isobutene\MIsoprene Rubber)
D4004-93R02 Test Methods for Rubber\MDetermination of Metal Content by Flame Atomic Absorption (AAS) Analysis
D4026-87R02E01 Test Method for Rubber Latex\MStyrene-Butadiene Copolymer\MDetermination of Residual Styrene
D4075-02 Test Methods for Compounding Materials\MFlame Atomic Absorption Technique\MDetermination of Metals
D4122-05A Practice for Carbon Black\MEvaluation of an Industry Reference Black
D4295-89R05 Classification for Rubber Compounding Materials\MZinc Oxide
D4315-94R01 Test Methods for Rubber Compounding Material\MZinc Oxide
D4482-99 Test Method for Rubber Property\MExtension Cycling Fatigue
D4483-05 Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
D4527-99R04 Test Method for Carbon Black\MSolvent Extractables
D4528-88R02 Classification for Rubber Compounding Materials\MSulfur
D4569-02 Test Method for Rubber Chemicals\MDetermination of Acidity in Sulfur
D4570-02 Test Method for Rubber Chemicals\MDetermination of Particle Size of Sulfur by Sieving (Dry)
D4571-02 Test Methods for Rubber Chemicals\MDetermination of Volatile Material
D4572-89R05 Test Method for Rubber Chemicals\MWet Sieve Analysis of Sulfur
D4573-03 Test Method for Rubber Chemicals\MDetermination of Oil Content in Oil-Treated Sulfur
D4574-02 Test Methods for Rubber Chemicals\MDetermination of Ash Content
D4575-99R05 Test Methods for Rubber Deterioration\MReference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
D4578-89R02 Test Methods for Rubber Chemicals\MDetermination of Percent Insoluble Sulfur by Solvent Extraction
D4583-95R04 Practice for Carbon Black\MCalculation of Process Indexes From an Analysis of Process Control Data
D4620-02 Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
D4676-94R01 Classification for Rubber Compounding Materials\MAntidegradents
D4677-87R02 Classification for Rubber Compounding Materials\MTitanium Dioxide
D4678-04 Practice for Rubber\MPreparation, Testing, Acceptance, Documentation, and Use of Reference Materials
D4817-88R05 Classification for Rubber Compounding Materials\MStearic Acid
D4818-89R05 Classification for Rubber Compounding Materials\MVulcanization Accelerators
D4821-04 Guide for Carbon Black\MValidation of Test Method Precision and Bias
D4924-89R05 Classification for Petroleum Waxes for Use in Rubber Compounding
D4934-02 Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators\MInsolubles
D4936-96R01 Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
D4937-96R01 Test Method for -Phenylenediamine Antidegradants Purity by Gas Chromatography
D5044-02 Test Method for Rubber Chemicals\MFree 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)
D5051-02 Test Method for Rubber Chemicals\MBenzothiazyl Disulfide (MBTS)\MAssay
D5054-90R04E01 Test Method for Rubber Chemicals\MDiphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay
D5099-93R03 Test Methods for Rubber\MMeasurement of Processing Properties Using Capillary Rheometry
D5230-04E01 Test Method for Carbon Black\MAutomated Individual Pellet Hardness
D5289-95R01 Test Method for Rubber Property\MVulcanization Using Rotorless Cure Meters
D5297-95R04 Test Methods for Rubber Chemical Accelerator\MPurity by High Performance Liquid Chromatography
D5376-93R02 Test Method for Rubber Chemicals\MDetermination of the Percent Nitrogen in Rubber Antioxidant: Polymerized TMQ
D5377-93R02 Classification for Rubber Compounding Materials\MGround Coal
D5406-93R02 Practice for Rubber\MCalculation of Producer's Process Performance Indexes
D5460-02 Test Method for Rubber Compounding Materials\MWater in Rubber Additives
D5461-02 Test Method for Rubber Additives\MWet Sieve Analysis of Powdered Rubber Chemicals
D5538-02 Practice for Thermoplastic Elastomers\MTerminology and Abbreviations
D5603-01 Classification for Rubber Compounding Materials\MRecycled Vulcanizate Particulate Rubber
D5604-96R01 Test Methods for Precipitated Silica\MSurface Area by Single Point B.E.T. Nitrogen Adsorption
D5605-94R02 Practice for Styrene-Butadiene Rubber (SBR)\MEstablishing Raw Mooney Viscosity Target Values
D5644-01 Test Methods for Rubber Compounding Materials\MDetermination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
D5666-95R04E01 Test Method for Rubber Chemical Antidegradants\MPurity of -Phenylenediamine (PPD) Antidegradants by High Performance Liquid Chromatography
D5667-95R05 Test Method for Rubber From Synthetic Sources\MTotal and Water Soluble Ash
D5668-99R03 Test Methods for Rubber From Synthetic Sources\MVolatile Matter
D5670-95R04E01 Test Method for Rubber\MDetermination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
D5774-95R04E02 Test Methods for Rubber\MChemical Analysis of Extractables
D5775-95R04E01 Test Method for Rubber\MDetermination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index
D5805-00R04E01 Test Methods for Rubber\MDetermination of Carbon Black in Masterbatches
D5817-03A Practice for Carbon Black, Pelleted\MReduction, Blending, and Drying of Gross Samples for Testing
D5899-98R02 Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems
D5900-03 Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
D5902-96R01 Test Method for Rubber\MDetermination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
D5963-04 Test Method for Rubber Property\MAbrasion Resistance (Rotary Drum Abrader)
D5964-96R01 Practice for Rubber IRM 902 and IRM 903 Replacement Oils for ASTM No. 2 and ASTM No. 3 Oils
D5992-96R01E01 Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
D6047-99R03 Test Methods for Rubber, Raw\MDetermination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
D6048-02 Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers
D6049-03 Test Method for Rubber Property\MMeasurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
D6085-97R02 Practice for Sampling in Rubber Testing\MTerminology and Basic Concepts
D6086-05 Test Method for Carbon Black\MVoid Volume (VV)
D6147-97R02 Test Method for Vulcanized Rubber and Thermoplastic Elastomer\MDetermination of Force Decay (Stress Relaxation) in Compression
D6204-04 Test Method for Rubber\MMeasurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
D6370-99R03 Test Method for Rubber\MCompositional Analysis by Thermogravimetry (TGA)
D6556-04 Test Method for Carbon Black\MTotal and External Surface Area by Nitrogen Adsorption
D6600-00R04 Practice for Evaluating Test Sensitivity for Rubber Test Methods
D6601-02 Test Method for Rubber Properties\MMeasurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
D6602-03B Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
D6738-01 Test Method for Precipitated Silica\MVolatile Content
D6739-01 Test Method for Silica\MpH Value
D6740-01 Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition
D6741-01 Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
D6746-03 Test Method for Raw Rubber or Unvulcanized Compounds\MDetermination of Tensile Green Strength
D6814-02E01 Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
D6843-02 Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)
D6844-02 Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)
D6845-02 Test Method for Silica, Precipitated, Hydrated\MCTAB (Cetyltrimethylammonium Bromide) Surface Area
D6854-03 Test Method for Silica\Mn-Dibutyl Phthalate Absorption Number
D6915-05A Practice for Carbon Black\MEvaluation of Standard Reference Blacks
D7050-04 Practice for Rubber from Natural Sources\MSampling and Sorting Bales Based on Predicted Processing Properties
Volume 09.02, August 2005
Rubber Products, Industrial -- Specifications and Related Test Methods; Gaskets; Tires
D0378-00 Test Methods for Rubber (Elastomeric) Belting, Flat Type
D0380-94R00 Test Methods for Rubber Hose
D0622-99R05 Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System
D0751-00E01 Test Methods for Coated Fabrics
D1330-04 Specification for Rubber Sheet Gaskets
D1414-94R03 Test Methods for Rubber O-Rings
D1764 Specification for Rubber Latex Products for Automotive Applications
D1869-95R00 Specification for Rubber Rings for Asbestos-Cement Pipe
D2000-05 Classification System for Rubber Products in Automotive Applications
D2433-93R02 Test Methods for Rubber Thread
D2527-83R01 Specification for Rubber Seals\MSplice Strength
D3389-05 Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
D3393-91R01E01 Specification for Coated Fabrics\MWaterproofness
D3492-03 Specification for Rubber Contraceptives (Male Condoms)
D3577-01AE02 Specification for Rubber Surgical Gloves
D3578-05 Specification for Rubber Examination Gloves
D3579-77R04 Specification for Rubber Surgical Drainage Tubes, Penrose-Type
D3667-85R00 Specification for Rubber Seals\t Used\t in\t Flat-Plate\t Solar\t Collectors
D3738-84R04 Specification for Rubber-Coated Cloth Hospital Sheeting
D3771-03 Specification for Rubber Seals Used in Concentrating Solar Collectors
D3772-01 Specification for Natural Rubber Finger Cots
D3832-79R01 Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
D3854-90R00 Test Method for Rubber Thread\MResistance to Dry Heat
D3855-84R04 Test Method for Rubber Thread\MDeterioration Due to Standard Washing Solution Treatment
D3899 Specification for Rubber Contraceptives\MVaginal Diaphragms
D3902-90R04E01 Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
D3903-03 Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
D3959-91R01 Test Method for Rubber- and Plastic-Coated Fabrics\MDiscoloration Sensitivity to Tobacco Smoke
D4005-92R01 Test Method for Plastic-Coated Fabrics\MCompleteness of Fusion of PVC Dispersion Coatings
D4316-95R01 Specification for Elastomeric Water Bottles
D4679-02 Specification for Rubber General Purpose, Household or\t Beautician\t Gloves
D5151-99 Test Method for Detection of Holes in Medical Gloves
D5193_D5193M-93R02 Test Method for Coated Fabrics\MAir Retention
D5250-00E04 Specification for Poly(vinyl chloride) Gloves for Medical Application
D5712-99E01 Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber and Its Products Using the Modified Lowry Method
D6124-01 Test Method for Residual Powder on Medical Gloves
D6284-02 Test Method for Rubber Property\MEffect of Aqueous Solutions with Available Chlorine and Chloramine
D6319-00AE03 Specification for Nitrile Examination Gloves for Medical Application
D6324-99AR04 Test Methods for Male Condoms Made from Synthetic Materials
D6355-98R03 Test Method for Human Repeat Insult Patch Testing of Medical Gloves
D6499-03 Test Method for The Immunological Measurement of Antigenic Protein in Natural Rubber and its Products
D6515-00R04 Test Method for Rubber Shaft Seals Determination of Recovery From Bending
D6909-03 Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer
D6976-03 Specification for Rubber Contraceptives\MVaginal Diaphragms
D6977-04 Specification for Polychloroprene Examination Gloves for Medical Application
D6978-05 Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs
D7102-04 Guide for Determination of Endotoxin on Sterile Medical Gloves
E1136-93R03 Specification for A Radial Standard Reference Test Tire
F0036-99R03 Test Method for Compressibility and Recovery of Gasket Materials
F0037-00 Test Methods for Sealability of Gasket Materials
F0038-00 Test Methods for Creep Relaxation of a Gasket Material
F0104-03 Classification System for Nonmetallic Gasket Materials
F0112-00 Test Method for Sealability of Enveloped Gaskets
F0118-04 Definitions of Terms Relating to Gaskets
F0145-72R03 Practice for Evaluating Flat-Faced Gasketed Joint Assemblies
F0146-04 Test Methods for Fluid Resistance of Gasket Materials
F0147-87R03 Test Method for Flexibility of Non-Metallic Gasket Materials
F0148-02 Test Method for Binder Durability of Cork Composition Gasket Materials
F0152-95R02 Test Methods for Tension Testing of Nonmetallic Gasket Materials
F0336-02 Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service
F0363-99R04 Test Method for Corrosion Testing of Gaskets
F0377-03 Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires
F0403-98 Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using Highway Vehicles
F0408-99 Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer
F0414-00 Test Method for Energy Absorbed by a Tire When Deformed by a Slow-Moving Plunger
F0421-00 Test Method for Measuring Groove and Void Depth in Passenger Car Tires
F0424-98 Test Method for Tires for Wet Driving Traction in Straight-Ahead Motion Using Highway Vehicles
F0433-02 Practice for Evaluating Thermal Conductivity of Gasket Materials
F0434-93R03 Test Method for Blow-Out Testing of Preformed Gaskets
F0457-04 Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
F0495-99AR04 Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
F0538-03 Terminology Relating to the Characteristics and Performance of Tires
F0551-89R00 Practice for Using a 67.23-in. (1.707-m) Diameter Laboratory Test Roadwheel in Testing Tires
F0559-95R00 Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
F0607-03 Test Method for Adhesion of Gasket Materials to Metal Surfaces
F0724-94AR04 Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance
F0762-94R00E01 Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires
F0806-99AR03 Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
F0811-02 Practice for Accelerometer Use in Vehicles for Tire Testing
F0868-02 Classification for Laminated Composite Gasket Materials
F0870-94R00 Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
F1016-93R01 Practice for Linear Tire Treadwear Data Analysis
F1035-03 Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
F1046-01 Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing
F1082-00R00 Practice for Tires\MDetermining Precision for Test Method Standards
F1087-02 Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
F1112-00 Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure
F1276-99R03 Test Method for Creep Relaxation of Laminated Composite Gasket Materials
F1277-02 Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
F1315-00 Test Method for Density of a Sheet Gasket Material
F1364-03 Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
F1426-94R03 Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use
F1502-05E01 Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles
F1572-99 Test Methods for Tire Performance Testing on Snow and Ice Surfaces
F1574-03A Test Method for Compressive Strength of Gaskets at Elevated Temperatures
F1649-96R03 Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems
F1650-98 Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions
F1805-00 Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces
F1806-97R01E01 Practice for Tire Testing Operations\NBasic Concepts and Terminology for Reference Tire Use
F1909-98R04 Specification for Preformed Open\NCell Sponge Rubber Pail and Drum Gaskets
F1922-98 Test Method for Tires, Pneumatic, Vehicular, Highway
F1923-98 Test Method for Tires, Pneumatic, Low Speed, Off Highway
F1971-99 Test Method for Electrical Resistance of Tires Under Load On the Test Bench
F2325-03 Classification for Multi-Layer Steel (MLS) and Other Metal Layer Gaskets for Transportation Applications
F2378-05 Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials
F2466-05 Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications
F2467-05 Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications
F2468-05 Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
Section 10 - Electrical Insulation and Electronics
Volume 10.01, January 2005
Electrical Insulation (I): D 69 - D 2484
D0069-01 Test Methods for Friction Tapes
D0115-02 Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
D0149-97AR04 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
D0150-98R04 Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
D0176-00 Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation
D0202-97R02E01 Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
D0229-01 Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
D0257-99 Test Methods for DC Resistance or Conductance of Insulating Materials
D0295-99R04 Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation
D0348-00 Test Methods for Rigid Tubes Used for Electrical Insulation
D0349-99R04 Test Methods for Laminated Round Rods Used for Electrical Insulation
D0350-01 Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
D0351-97R03 Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality
D0352-97R03 Test Methods for Pasted Mica Used in Electrical Insulation
D0372-00 Specification for Flexible Treated Sleeving Used for Electrical Insulation
D0374-99R04 Test Methods for Thickness of Solid Electrical Insulation
D0374M-99 Test Methods for Thickness of Solid Electrical Insulation (Metric)
D0411-98R03 Test Methods for Shellac Used for Electrical Insulation
D0470-99 Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
D0495-99R04 Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
D0617 Test Method for Punching Quality of Phenolic Laminated Sheets
D0619-99R04 Test Methods for Vulcanized Fibre Used for Electrical Insulation
D0668-99R04 Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
D0669-03 Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
D0709-01 Specification for Laminated Thermosetting Materials
D0710-97R02 Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
D0748-00 Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors
D0784-03 Specification for Orange Shellac and Other Indian Lacs for Electrical Insulation
D0866-99R04 Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable
D0876-00 Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
D0902-00 Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation
D0922-00A Specification for Nonrigid Vinyl Chloride Polymer Tubing
D1000-04 Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
D1039-94R04 Test Methods for Glass-Bonded Mica Used as Electrical Insulation
D1047-95R01 Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
D1082-00 Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
D1168-99R03 Test Methods for Hydrocarbon Waxes Used for Electrical Insulation
D1305-99R04 Specification for Electrical Insulating Paper and Paperboard\MSulfate (Kraft) Layer Type
D1351-02 Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
D1352-02 Specification for Ozone-Resisting Butyl Rubber Insulation for Wire and Cable
D1389-97AR04 Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
D1458-01 Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
D1459-93R03 Specification for Silicone Varnished Glass Cloth and Tape for Electrical Insulation
D1523-00 Specification for Synthetic Rubber Insulation for Wire and Cable, 90|SDC Operation
D1531-01 Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
D1673-94R04 Test Methods for Relative Permittivity And Dissipation Factor of Expanded Cellular Polymers Used For Electrical Insulation
D1675-03 Test Methods for Polytetrafluoroethylene Tubing
D1676-03 Test Methods for Film-Insulated Magnet Wire
D1677-02 Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
D1679-02 Specification for Synthetic Rubber Heat-and Moisture-Resisting Insulation for Wire and Cable, 75|SDC Operation
D1711-02 Terminology Relating to Electrical Insulation
D1825-03 Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
D1830-99 Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
D1867-01 Specification for Copper-Clad Thermosetting Laminates for Printed Wiring
D1868-93R98 Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
D1931-99R04 Specification for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
D1932-04 Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
D2131-97R03 Classification for Natural Muscovite Mica Splittings
D2132-03 Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
D2148-02 Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
D2219-02 Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60|SDC Operation
D2220-02 Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75|SDC Operation
D2275-01 Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
D2301-99R04 Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
D2303-97R04 Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
D2304-97R02 Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
D2305-02 Test Methods for Polymeric Films Used for Electrical Insulation
D2307-01 Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
D2308-02 Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
D2381-87R99E01 Test Methods for Flexible Composite Materials Used for Electrical Insulation
D2400-99R04 Specification for Varnished Glass-Polyester Cloth Used for Electrical Insulation
D2413-99 Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
D2484-00 Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape
D2518-99R04 Specification for Woven Glass Fabrics for Electrical Insulation
D2519-02 Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
D2520-01 Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650|SDC
D2526-02 Specification for Ozone-Resisting Silicone Rubber Insulation for Wire and Cable
D2633-02 Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
D2655-00 Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
D2656-00 Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
D2671-00 Test Methods for Heat-Shrinkable Tubing for Electrical Use
D2686-00 Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape
D2754-99R04 Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
D2755 Test Method of Sampling and Reduction to Test Weight of Electrical Grade Magnesium Oxide
D2756-02 Test Method for Weight Loss of Electrical Insulating Varnishes
D2768-95R01 Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable
D2770-01 Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
D2771 Test Methods for Compaction Density of Electrical Grade Magnesium Oxide
D2772 Test Method for Sieve Analysis of Electrical Grade Magnesium Oxide
D2773 Test Method for Loss on Ignition of Electrical Grade Magnesium Oxide
D2802-03 Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
D2858 Test Method for Thermal Conductivity of Electrical Grade Magnesium Oxide
D2861-87R04 Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
D2865-01 Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
D2900 Test Method for Accelerated Life Test of Electrical Grade Magnesium Oxide as Used in Sheathed-Type Electric Heating Elements
D2902-00 Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
D2903-03 Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
D3004-02 Specification for Extruded Crosslinked and Thermoplastic Semi-Conducting, Conductor and Insulation Shielding Materials
D3005-99R04 Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
D3006-99R04 Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
D3026 Test Method for Sinter Index of Electrical Grade Magnesium Oxide for Use in Sheathed Heating Elements
D3032-04 Test Methods for Hookup Wire Insulation
D3056-00 Test Method for Gel Time of Solventless Varnishes
D3144-00 Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
D3145-03 Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
D3149-00 Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
D3150-00 Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
D3151-88R98 Test Method for Thermal Failure of Solid Electrical Insulating Materials Under Electric Stress
D3215 Test Method for Measurement of the Specific Electrical Impedance of Electrical-Grade Magnesium Oxide for Use in Sheathed-Type Heating Elements
D3251-04 Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
D3288-03 Test Methods for Magnet-Wire Enamels
D3312-04 Test Method for Percent Reactive Monomer in Solventless Varnishes
D3347 Test Method for Flow Rate and Tap Density of Electrical Grade Magnesium Oxide For Use in Sheathed Heating Elements
D3349-99 Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black
D3353-04 Test Methods for Fibrous-Insulated Magnet Wire
D3376-88R00 Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
D3377-04 Test Method for Weight Loss of Solventless Varnishes
D3380-90R03 Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
D3382-95R01E01 Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques
D3386-00 Test Method for Coefficient of Linear Thermal Expansion of Electrical Insulating Materials
D3394-94R00 Test Methods for Sampling and Testing Electrical Insulating Board
D3426-97R04 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
D3485-02 Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
D3554-01 Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75|SDC Operation
D3555-01 Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90|SDC Operation
D3636-00 Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
D3638-93R98 Test Method for Comparative Tracking Index of Electrical Insulating Materials
D3664-04 Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment
D3755-97R04 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
D3756-97R04 Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields
D3850-94R00 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
D3874-04 Test Method for Ignition of Materials by Hot Wire Sources
D3949-99R04 Specification for Coated Glass Fabrics Used for Electrical Insulation
D3955-04 Specification for Electrical Insulating Varnishes
D4063-99R04 Specification for Pressboard for Electrical Insulating Purposes
D4088 Practice for Preparation for Shipment of Solid Electrical Insulating Materials
D4243-99R04E01 Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
D4244-95R01 Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Acrylonitrile-Butadiene/Poly(Vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable
D4245-02 Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90|SDC Dry/75|SDC Wet Operation
D4246-02 Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90|SDC Operation
D4247-99R04 Specification for General-Purpose, Black Heavy-Duty, and Black Extra-Heavy-Duty Crosslinked Polychloroprene Jackets for Wire and Cable
D4313-03 Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable
D4314-99 Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable
D4325-02 Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
D4352 Test Method for Determination of Magnetic Material Impurities in Electrical Grade Magnesium Oxide
D4363-98R03 Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
D4388-02 Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
D4496-04 Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
D4514-00 Specification for Friction Tape
D4565-99R04E01 Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
D4566-98 Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
D4568-99R04E01 Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
D4730-02 Specification for Flooding Compounds for Telecommunications Wire and Cable
D4731-02 Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
D4732-02 Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
D4733-03 Test Methods for Solventless Electrical Insulating Varnishes
D4872-99R04E01 Test Method for Dielectric Testing of Wire and Cable Filling Compounds
D4880-03 Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire
D4881-01 Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire
D4882-01 Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
D4935-99 Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials
D4967-99R04E01 Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables
D5032-97R03 Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
D5109-99R04 Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards
D5213-04 Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications
D5288-97R04 Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
D5374-93R99 Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
D5423-93R99 Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
D5424-99 Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
D5425-02 Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products
D5470-01 Test Method for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials
D5485-99 Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
D5537-03 Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
D5568-01 Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
D5569 Test Method for the Determination of Static Flow of Electrical Grade Magnesium Oxide for Use in Sheathed Heating Elements
D5637-04 Test Method for Moisture Resistance of Electrical Insulating Varnishes
D5638-00 Test Method for Chemical Resistance of Electrical Insulating Varnishes
D5642-99R04 Test Method for Sealed Tube Chemical Compatibility Test
D6053-03 Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
D6070-02 Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
D6095-99 Test Method for Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
D6096-02 Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90|SDC Operation
D6097-01A Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
D6113-03 Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
D6194-04 Test Method for Glow-Wire Ignition of Materials
D6343-99R04 Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
F0542-02 Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation
F0677-04 Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications
Volume 10.02, May 2005
Electrical Insulation (II): D 2518 - latest
D0069-01 Test Methods for Friction Tapes
D0115-02 Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
D0149-97AR04 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
D0150-98R04 Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
D0176-00 Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation
D0202-97R02E01 Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
D0229-01 Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
D0257-99 Test Methods for DC Resistance or Conductance of Insulating Materials
D0295-99R04 Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation
D0348-00 Test Methods for Rigid Tubes Used for Electrical Insulation
D0349-99R04 Test Methods for Laminated Round Rods Used for Electrical Insulation
D0350-01 Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
D0351-97R03 Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality
D0352-97R03 Test Methods for Pasted Mica Used in Electrical Insulation
D0372-00 Specification for Flexible Treated Sleeving Used for Electrical Insulation
D0374-99R04 Test Methods for Thickness of Solid Electrical Insulation
D0374M-99 Test Methods for Thickness of Solid Electrical Insulation (Metric)
D0411-98R03 Test Methods for Shellac Used for Electrical Insulation
D0470-99 Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
D0495-99R04 Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
D0617 Test Method for Punching Quality of Phenolic Laminated Sheets
D0619-99R04 Test Methods for Vulcanized Fibre Used for Electrical Insulation
D0668-99R04 Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
D0669-03 Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
D0709-01 Specification for Laminated Thermosetting Materials
D0710-97R02 Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
D0748-00 Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors
D0784-03 Specification for Orange Shellac and Other Indian Lacs for Electrical Insulation
D0866-99R04 Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable
D0876-00 Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
D0902-00 Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation
D0922-00A Specification for Nonrigid Vinyl Chloride Polymer Tubing
D1000-04 Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
D1039-94R04 Test Methods for Glass-Bonded Mica Used as Electrical Insulation
D1047-95R01 Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
D1082-00 Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
D1168-99R03 Test Methods for Hydrocarbon Waxes Used for Electrical Insulation
D1305-99R04 Specification for Electrical Insulating Paper and Paperboard\MSulfate (Kraft) Layer Type
D1351-02 Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
D1352-02 Specification for Ozone-Resisting Butyl Rubber Insulation for Wire and Cable
D1389-97AR04 Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
D1458-01 Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
D1459-93R03 Specification for Silicone Varnished Glass Cloth and Tape for Electrical Insulation
D1523-00 Specification for Synthetic Rubber Insulation for Wire and Cable, 90|SDC Operation
D1531-01 Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
D1673-94R04 Test Methods for Relative Permittivity And Dissipation Factor of Expanded Cellular Polymers Used For Electrical Insulation
D1675-03 Test Methods for Polytetrafluoroethylene Tubing
D1676-03 Test Methods for Film-Insulated Magnet Wire
D1677-02 Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
D1679-02 Specification for Synthetic Rubber Heat-and Moisture-Resisting Insulation for Wire and Cable, 75|SDC Operation
D1711-02 Terminology Relating to Electrical Insulation
D1825-03 Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
D1830-99 Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
D1867-01 Specification for Copper-Clad Thermosetting Laminates for Printed Wiring
D1868-93R98 Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
D1931-99R04 Specification for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
D1932-04 Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
D2131-97R03 Classification for Natural Muscovite Mica Splittings
D2132-03 Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
D2148-02 Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
D2149-97R04 Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Dielectrics At Frequencies To 10 MHz And Temperatures To 500|SDC
D2219-02 Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60|SDC Operation
D2220-02 Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75|SDC Operation
D2275-01 Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
D2301-99R04 Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
D2303-97R04 Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
D2304-97R02 Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
D2305-02 Test Methods for Polymeric Films Used for Electrical Insulation
D2307-01 Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
D2308-02 Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
D2381-87R99E01 Test Methods for Flexible Composite Materials Used for Electrical Insulation
D2400-99R04 Specification for Varnished Glass-Polyester Cloth Used for Electrical Insulation
D2413-99 Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
D2484-00 Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape
D2518-99R04 Specification for Woven Glass Fabrics for Electrical Insulation
D2519-02 Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
D2520-01 Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650|SDC
D2526-02 Specification for Ozone-Resisting Silicone Rubber Insulation for Wire and Cable
D2633-02 Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
D2655-00 Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
D2656-00 Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
D2671-00 Test Methods for Heat-Shrinkable Tubing for Electrical Use
D2686-00 Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape
D2754-99R04 Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
D2755 Test Method of Sampling and Reduction to Test Weight of Electrical Grade Magnesium Oxide
D2756-02 Test Method for Weight Loss of Electrical Insulating Varnishes
D2768-95R01 Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable
D2770-01 Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
D2771 Test Methods for Compaction Density of Electrical Grade Magnesium Oxide
D2772 Test Method for Sieve Analysis of Electrical Grade Magnesium Oxide
D2773 Test Method for Loss on Ignition of Electrical Grade Magnesium Oxide
D2802-03 Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
D2858 Test Method for Thermal Conductivity of Electrical Grade Magnesium Oxide
D2861-87R04 Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
D2865-01 Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
D2900 Test Method for Accelerated Life Test of Electrical Grade Magnesium Oxide as Used in Sheathed-Type Electric Heating Elements
D2902-00 Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
D2903-03 Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
D3004-02 Specification for Extruded Crosslinked and Thermoplastic Semi-Conducting, Conductor and Insulation Shielding Materials
D3005-99R04 Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
D3006-99R04 Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
D3026 Test Method for Sinter Index of Electrical Grade Magnesium Oxide for Use in Sheathed Heating Elements
D3032-04 Test Methods for Hookup Wire Insulation
D3056-00 Test Method for Gel Time of Solventless Varnishes
D3144-00 Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
D3145-03 Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
D3149-00 Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
D3150-00 Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
D3151-88R98 Test Method for Thermal Failure of Solid Electrical Insulating Materials Under Electric Stress
D3215 Test Method for Measurement of the Specific Electrical Impedance of Electrical-Grade Magnesium Oxide for Use in Sheathed-Type Heating Elements
D3251-04 Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
D3288-03 Test Methods for Magnet-Wire Enamels
D3312-04 Test Method for Percent Reactive Monomer in Solventless Varnishes
D3347 Test Method for Flow Rate and Tap Density of Electrical Grade Magnesium Oxide For Use in Sheathed Heating Elements
D3349-99 Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black
D3353-04 Test Methods for Fibrous-Insulated Magnet Wire
D3376-88R00 Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
D3377-04 Test Method for Weight Loss of Solventless Varnishes
D3380-90R03 Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
D3382-95R01E01 Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques
D3386-00 Test Method for Coefficient of Linear Thermal Expansion of Electrical Insulating Materials
D3394-94R00 Test Methods for Sampling and Testing Electrical Insulating Board
D3426-97R04 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
D3485-02 Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
D3554-01 Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75|SDC Operation
D3555-01 Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90|SDC Operation
D3636-00 Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
D3638-93R98 Test Method for Comparative Tracking Index of Electrical Insulating Materials
D3664-04 Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment
D3755-97R04 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
D3756-97R04 Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields
D3850-94R00 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
D3874-04 Test Method for Ignition of Materials by Hot Wire Sources
D3949-99R04 Specification for Coated Glass Fabrics Used for Electrical Insulation
D3955-04 Specification for Electrical Insulating Varnishes
D4063-99R04 Specification for Pressboard for Electrical Insulating Purposes
D4088 Practice for Preparation for Shipment of Solid Electrical Insulating Materials
D4243-99R04E01 Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
D4244-95R01 Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Acrylonitrile-Butadiene/Poly(Vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable
D4245-02 Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90|SDC Dry/75|SDC Wet Operation
D4246-02 Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90|SDC Operation
D4247-99R04 Specification for General-Purpose, Black Heavy-Duty, and Black Extra-Heavy-Duty Crosslinked Polychloroprene Jackets for Wire and Cable
D4313-03 Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable
D4314-99 Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable
D4325-02 Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
D4352 Test Method for Determination of Magnetic Material Impurities in Electrical Grade Magnesium Oxide
D4363-98R03 Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
D4388-02 Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
D4470-97R04 Test Method for Static Electrification
D4496-04 Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
D4514-00 Specification for Friction Tape
D4565-99R04E01 Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
D4566-98 Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
D4568-99R04E01 Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
D4730-02 Specification for Flooding Compounds for Telecommunications Wire and Cable
D4731-02 Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
D4732-02 Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
D4733-03 Test Methods for Solventless Electrical Insulating Varnishes
D4872-99R04E01 Test Method for Dielectric Testing of Wire and Cable Filling Compounds
D4880-03 Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire
D4881-01 Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire
D4882-01 Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
D4935-99 Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials
D4967-99R04E01 Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables
D5032-97R03 Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
D5109-99R04 Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards
D5213-04 Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications
D5288-97R04 Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
D5374-93R99 Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
D5423-93R99 Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
D5424-99 Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
D5425-02 Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products
D5470-01 Test Method for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials
D5485-99 Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
D5537-03 Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
D5568-01 Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
D5569 Test Method for the Determination of Static Flow of Electrical Grade Magnesium Oxide for Use in Sheathed Heating Elements
D5637-04 Test Method for Moisture Resistance of Electrical Insulating Varnishes
D5638-00 Test Method for Chemical Resistance of Electrical Insulating Varnishes
D5642-99R04 Test Method for Sealed Tube Chemical Compatibility Test
D6053-03 Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
D6054-97R04 Practice for Conditioning Electrical Insulating Materials for Testing
D6070-02 Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
D6095-99 Test Method for Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
D6096-02 Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90|SDC Operation
D6097-01A Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
D6113-03 Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
D6194-04 Test Method for Glow-Wire Ignition of Materials
D6343-99R04 Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
F0542-02 Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation
F0677-04 Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications
Volume 10.03, May 2005
Electrical Insulating Liquids and Gases; Electrical Protective Equipment
D0117-02 Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin
D0120-02A Specification for Rubber Insulating Gloves
D0178-01E01 Specification for Rubber Insulating Matting
D0831-94R04 Test Method for Gas Content of Cable and Capacitor Oils
D0877-02E01 Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
D0878-01E01 Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
D0901 Test Methods for Askarels
D0923-97 Practices for Sampling Electrical Insulating Liquids
D0924-04 Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
D0971-99AR04 Test Method for Interfacial Tension of Oil Against Water by the Ring Method
D1048-05 Specification for Rubber Insulating Blankets
D1049-98R02E01 Specification for Rubber Insulating Covers
D1050-05E01 Specification for Rubber Insulating Line Hose
D1051-02 Specification for Rubber Insulating Sleeves
D1169-02 Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
D1275-03 Test Method for Corrosive Sulfur in Electrical Insulating Oils
D1524-94R04 Test Method for Visual Examination of Used Electrical Insulating Oils of Petroleum Origin in the Field
D1533-00 Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
D1534-95R02E01 Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration
D1698-03 Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils
D1807-00 Test Methods for Refractive Index and Specific Optical Dispersion of Electrical Insulating Liquids
D1816-04 Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
D1827-92R02 Test Method for Gas Content (Nonacidic) of Insulating Liquids by Displacement with Carbon Dioxide
D1903-03 Test Method for Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels\t
D1933-03 Specification for Nitrogen Gas as an Electrical Insulating Material
D1934-95R00 Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
D2029-97R03 Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point
D2112-01A Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel
D2129-97 Test Method for Color of Clear Electrical Insulating Liquids(Platinum-Cobalt Scale)
D2140-03 Test Method for Carbon-Type Composition of Insulating Oils of Petroleum Origin\t
D2144-01E01 Test Methods for Examination of Electrical Insulating Oils by Infrared Absorption
D2225-04 Test Methods for Silicone Fluids Used for Electrical Insulation
D2233 Specification for Chlorinated Aromatic Hydrocarbons (Askarels) for Capacitors
D2283 Specification for Chlorinated Aromatic Hydrocarbons (Askarels) for Transformers
D2284-95R02 Test Method for Acidity of Sulfur Hexafluoride
D2285-99 Test Method for Interfacial Tension of Electrical Insulating Oils of Petroleum Origin Against Water by the Drop-Weight Method
D2296-01 Specification for Continuity of Quality of Electrical Insulating Polybutene Oil for Capacitors
D2300-00 Test Method for Gassing of Electrical Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method)\t
D2440-99R04 Test Method for Oxidation Stability of Mineral Insulating Oil
D2472-00 Specification for Sulfur Hexafluoride\t
D2477-02 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
D2522-03 Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
D2668-02 Test Method for 2,6--Butyl--Cresol and 2,6--Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
D2685-95R03 Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography
D2759-00 Practice for Sampling Gas from\t a\t Transformer\t Under\t Positive\t Pressure\t
D2864-02 Terminology Relating to Electrical Insulating Liquids and Gases
D2945-90R03E01 Test Method for Gas Content of Insulating Oils
D3277-95R01E01 Test Methods for Moisture Content of Oil-Impregnated Cellulosic Insulation
D3283-98R04 Specification for Air as an Electrical Insulating Material
D3284-99 Test Method for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
D3300-00 Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions
D3305-94R99E01 Practice for Sampling Small Gas Volume in a Transformer
D3455-02 Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
D3487-00 Specification for Mineral Insulating Oil Used in Electrical Apparatus
D3612-02 Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
D3613-98 Practice for Sampling Insulating Liquids for Gas Analysis and Determination of Water Content
D3635-01 Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry\t
D3809-01 Test Methods for Synthetic Dielectric Fluids For Capacitors
D4059-00 Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
D4559-99R04 Test Method for Volatile Matter in Silicone Fluid
D4652-92R97 Specification for Silicone Fluid Used for Electrical Insulation
D4768-03 Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary-Butyl Phenol in Insulating Liquids by Gas Chromatography\t
D5222-00 Specification for High Fire-Point Mineral Electrical Insulating Oils
D5282-98 Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation
D5837-99E01 Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)
D6180-98R04 Test Method for Stability of Insulating Oils of Petroleum Origin Under Electrical Discharge
D6181-03 Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin
D6786-02 Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
D6802-02 Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
D6871-03 Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus
F0478-92R99 Specification for In-Service Care of Insulating Line Hose and Covers
F0479-95R01 Specification for In-Service Care of Insulating Blankets
F0496-02AE01 Specification for In-Service Care of Insulating Gloves and Sleeves
F0696-02 Specification for Leather Protectors for Rubber Insulating Gloves and Mittens
F0711-02 Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools
F0712-88R00 Test Methods for Electrically Insulating Plastic Guard Equipment for Protection of Workers
F0819-05 Terminology Relating to Electrical Protective Equipment for Workers
F0855-04 Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
F0887-04 Specifications for Personal Climbing Equipment
F0914-03 Test Method for Acoustic Emission for Insulated and Non-Insulated Aerial Personnel Devices Without Supplemental Load Handling Attachments
F0968-93R02E01 Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers
F1116-03 Test Method for Determining Dielectric Strength of Dielectric Footwear
F1117-03 Specification for Dielectric Footwear
F1236-96R01 Guide for Visual Inspection of Electrical Protective Rubber Products
F1430-03 Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments
F1505-01 Specification for Insulated and Insulating Hand Tools
F1506-02AE01 Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards
F1564-95R00 Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers\t
F1701-96R01 Specification for Unused Polypropylene Rope with Special Electrical Properties
F1742-03E01 Specification for PVC Insulating Sheeting
F1796-97R02 Specification for High Voltage Detectors\MPart 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC
F1797-98R03 Test Method for Acoustic Emission Testing of Insulated Digger Derricks
F1825-03 Specification for Clampstick Type Live Line Tools
F1826-00 Specification for Live Line and Measuring Telescoping Tools
F1891-02B Specification for Arc and Flame Resistant Rainwear
F1958_F1958M-99 Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins
F1959_F1959M-04 Test Method for Determining the Arc Rating of Materials for Clothing
F2174-02 Practice for Verifying Acoustic Emission Sensor Response
F2178-02 Test Method for Determining The Arc Rating Of Face Protective Products
F2249-03 Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment
F2320-03 Specification for Rubber Insulating Sheeting
F2321-03 Specification for Flexible Insulated Temporary By-Pass Jumpers
Volume 10.04, April 2005
Electronics
E1392 Practice for Angle Resolved Optical Scatter Measurements on Specular or Diffuse Surfaces
F0001-03 Specification for Nickel-Clad and Nickel-Plated Steel Strip for Electron Tubes
F0003-02A Specification for Nickel Strip for Electron Tubes
F0004-66R05 Specification for Carbonized Nickel Strip and Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes
F0007-95R00 Specification for Aluminum Oxide Powder\t
F0015-04 Specification for Iron-Nickel-Cobalt Sealing Alloy
F0016-67R00 Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
F0018-64R00 Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices
F0019-64R05E01 Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
F0026 Test Methods for Determining the Orientation of a Semiconductive Single Crystal
F0028 Test Methods for Minority-Carrier Lifetime in Bulk Germanium and Silicon by Measurement of Photoconductivity Decay
F0029-97R02 Specification for Dumet Wire for Glass-to-Metal Seal Applications
F0030-96R02 Specification for Iron-Nickel Sealing Alloys
F0031-05 Specification for 42 \% Nickel-6 \% Chromium-Iron Sealing Alloy
F0042 Test Methods for Conductivity Type of Extrinsic Semiconducting Materials
F0043 Test Methods for Resistivity of Semiconductor Materials
F0044-95R00 Specification for Metallized Surfaces on Ceramic
F0072-95R01 Specification for Gold Wire for Semiconductor Lead Bonding
F0073-96R02 Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps
F0076-86R02 Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
F0078-97R02 Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
F0081 Test Method for Measuring Radial Resistivity Variation on Silicon Wafers
F0083-71R02 Practice for Definition and Determination of Thermionic Constants of Electron Emitters
F0084 Test Method for Measuring Resistivity of Silicon Wafers With an In-Line Four-Point Probe
F0085-76R02 Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes
F0095 Test Method for Thickness of Lightly Doped Silicon Epitaxial Layers on Heavily Doped Silicon Substrates Using an Infrared Dispersive Spectrophotometer
F0096-77R05 Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms
F0097-72R02E01 Practices for Determining Hermeticity of Electron Devices by Dye Penetration
F0106-00 Specification for Brazing Filler Metals for Electron Devices
F0110 Test Method for Thickness of Epitaxial or Diffused Layers in Silicon by the Angle Lapping and Staining Technique
F0111-96R02 Practice for Determining Barium Yield, Getter Gas Content, and Getter Sorption Capacity for Barium Flash Getters
F0154 Guide for Identification of Structures and Contaminants Seen on Specular Silicon Surfaces
F0180-94R05 Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
F0204-76R02 Test Method for Surface Flaws in Tungsten Seal Rod and Wire
F0205-94R05 Test Method for Measuring Diameter of Fine Wire by Weighing
F0219-96R02 Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps
F0256-05 Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium
F0269-60R02 Test Method for Sag of Tungsten Wire
F0288-96R02 Specification for Tungsten Wire for Electron Devices and Lamps
F0289-96R02 Specification for Molybdenum Wire and Rod for Electronic Applications
F0290-94R05 Specification for Round Wire for Winding Electron Tube Grid Laterals
F0357-78R02 Practice for Determining Solderability of Thick Film Conductors\t
F0358-83R02 Test Method for Wavelength of Peak Photoluminescence and the Corresponding Composition of Gallium Arsenide Phosphide Wafers\t
F0364-96R02 Specification for Molybdenum Flattened Wire for Electron Tubes
F0374 Test Method for Sheet Resistance of Silicon Epitaxial, Diffused, Polysilicon, and Ion-implanted Layers Using an In-Line Four-Point Probe with the Single-Configuration Procedure
F0375-89R05 Specification for Integrated Circuit Lead Frame Material
F0390-98R03 Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
F0391 Test Methods for Minority Carrier Diffusion Length in Extrinsic Semiconductors by Measurement of Steady-State Surface Photovoltage
F0397 Test Method for Resistivity of Silicon Bars Using a Two-Point Probe
F0398 Test Method for Majority Carrier Concentration in Semiconductors by Measurement of Wavenumber or Wavelength of the Plasma Resonance Minimum
F0418-77R02 Practice for Preparation of Samples of the Constant Composition Region of Epitaxial Gallium Arsenide Phosphide for Hall Effect Measurements
F0448-99R05 Test Method for Measuring Steady-State Primary Photocurrent
F0458-84R01 Practice for Nondestructive Pull Testing of Wire Bonds
F0459-84R01 Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
F0487-88R01 Specification for Fine Aluminum\N1 \% Silicon Wire for Semiconductor Lead-Bonding
F0508-77R02 Practice for Specifying Thick-Film Pastes\t
F0523 Practice for Unaided Visual Inspection of Polished Silicon Wafer Surfaces
F0525 Test Method for Measuring Resistivity of Silicon Wafers Using a Spreading Resistance Probe
F0526-97R03 Test Method for Measuring Dose for Use in Linear Accelerator Pulsed Radiation Effects Tests
F0528-99R05 Test Method of Measurement of Common-Emitter DC Current Gain of Junction Transistors
F0533 Test Method for Thickness and Thickness Variation of Silicon Wafers
F0534 Test Method for Bow of Silicon Wafers
F0576 Test Method for Measurement of Insulator Thickness and Refractive Index on Silicon Substrates by Ellipsometry
F0584-87R99 Practice for Visual Inspection of Semiconductor Lead-Bonding Wire
F0615M-95R02 Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components \[Metric\]
F0616M-96R03 Test Method for Measuring MOSFET Drain Leakage Current \[Metric\]
F0617-00 Test Method for Measuring MOSFET Linear Threshold Voltage
F0637-85R01 Specification for Format, Physical Properties, and Test Methods for 19 and 35 mm Testable Tape Carrier for Perimeter Tape Carrier-Bonded Semiconductor Devices
F0638-88R01 Specification for Fine Aluminum\M1 \% Magnesium Wire for Semiconductor Lead-Bonding
F0657 Test Method for Measuring Warp and Total Thickness Variation on Silicon Wafers by Noncontact Scanning
F0671 Test Method for Measuring Flat Length on Wafers of Silicon and Other Electronic Materials
F0672 Test Method for Measuring Resistivity Profiles Perpendicular to the Surface of a Silicon Wafer Using a Spreading Resistance Probe
F0673 Test Methods for Measuring Resistivity of Semiconductor Slices or Sheet Resistance of Semiconductor Films with a Noncontact Eddy-Current Gage
F0674 Practice for Preparing Silicon for Spreading Resistance Measurements
F0676-97R03 Test Method for Measuring Unsaturated TTL Sink Current
F0692-97R02 Test Method for Measuring Adhesion Strength of Solderable Films to Substrates
F0723 Practice for Conversion Between Resistivity and Dopant Density for Boron-Doped, Phosphorus-Doped, and Arsenic-Doped Silicon
F0728 Practice for Preparing An Optical Microscope for Dimensional Measurements
F0744M-97R03 Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits \[Metric\]
F0769-00 Test Method for Measuring Transistor and Diode Leakage Currents
F0773M-96R03 Practice for Measuring Dose Rate Response of Linear Integrated Circuits \[Metric\]
F0798-97R02 Practice for Determining Gettering Rate, Sorption Capacity, and Gas Content of Nonevaporable Getters in the Molecular Flow Region\t
F0816-83R03 Test Method for Combined Fine and Gross Leaks for Large Hybrid Microcircuit Packages
F0847 Test Methods for Measuring Crystallographic Orientation of Flats on Single Crystal Silicon Wafers by X-Ray Techniques
F0928 Test Methods for Edge Contour of Circular Semiconductor Wafers and Rigid Disk Substrates
F0950 Test Method for Measuring the Depth of Crystal Damage of a Mechanically Worked Silicon Slice Surface by Angle Polishing and Defect Etching
F0951 Test Method for Determination of Radial Interstitial Oxygen Variation in Silicon Wafers
F0978 Test Method for Characterizing Semiconductor Deep Levels by Transient Capacitance Techniques
F0979-86R03 Test Method for Hermeticity of Hybrid Microcircuit Packages Prior to Lidding
F0980M-96R03 Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices \[Metric\]
F0996-98R03 Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current\NVoltage Characteristics
F1048 Test Method for Measuring the Effective Surface Roughness of Optical Components by Total Integrated Scattering
F1049 Practice for Shallow Etch Pit Detection on Silicon Wafers
F1094-87R05 Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
F1152 Test Method for Dimensions of Notches on Silicon Wafers
F1153 Test Method for Characterization of Metal-Oxide-Silicon (MOS) Structures by Capacitance-Voltage Measurements
F1188 Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption with Short Baseline
F1190-99R05 Guide for Neutron Irradiation of Unbiased Electronic Components
F1192-00 Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiation of Semiconductor Devices
F1211-89R01 Specification for Semiconductor Device Passivation Opening Layouts
F1212-89R02 Test Method for Thermal Stability Testing of Gallium Arsenide Wafers
F1238-95R03 Specification for Refractory Silicide Sputtering Targets for Microelectronic Applications
F1239 Test Method for Oxygen Precipitation Characteristics of Silicon Wafers by Measurement of Interstitial Oxygen Reduction
F1241 Terminology of Silicon Technology
F1259M-96R03 Guide for Design of Flat, Straight-Line Test Structures for Detecting Metallization Open-Circuit or Resistance-Increase Failure Due to Electromigration \[Metric\]
F1260M-96R03 Test Method for Estimating Electromigration Median Time-To-Failure and Sigma of Integrated Circuit Metallizations \[Metric\]
F1261M-96R03 Test Method for Determining the Average Electrical Width of a Straight, Thin-Film Metal Line \[Metric\]
F1262M-95R02 Guide for Transient Radiation Upset Threshold Testing of Digital Integrated Circuits [Metric]
F1263-99R05 Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts
F1269-89R01 Test Methods for Destructive Shear Testing of Ball Bonds
F1366 Test Method for Measuring Oxygen Concentration in Heavily Doped Silicon Substrates by Secondary Ion Mass Spectrometry
F1367-98R03 Specification for Chromium Sputtering Targets for Thin Film Applications
F1372-93R05 Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
F1373-93R05 Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
F1374-92R05 Test Method for Ionic/Organic Extractables of Internal Surfaces-IC/GC/FTIR for Gas Distribution System Components
F1375-92R05 Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
F1376-92R05 Guide for Metallurgical Analysis for Gas Distribution System Components
F1388 Test Method for Generation Lifetime and Generation Velocity of Silicon Material by Capacitance-Time Measurements of Metal-Oxide-Silicon (MOS) Capacitors
F1389 Test Methods for Photoluminescence Analysis of Single Crystal Silicon for III-V Impurities
F1390 Test Method for Measuring Warp on Silicon Wafers by Automated Noncontact Scanning
F1391 Test Method for Substitutional Atomic Carbon Content of Silicon by Infrared Absorption
F1392 Test Method for Determining Net Carrier Density Profiles in Silicon Wafers by Capacitance-Voltage Measurements With a Mercury Probe
F1393 Test Method for Determining Net Carrier Density in Silicon Wafers by Miller Feedback Profiler Measurements With a Mercury Probe
F1394-92R05 Test Method for Determination of Particle Contribution from Gas Distribution System Valves
F1396-93R05 Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
F1397-93R05 Test Method for Determination of Moisture Contribution by Gas Distribution System Components
F1398-93R05 Test Method for Determination of Total Hydrocarbon Contribution by Gas Distribution System Components
F1404-92R99 Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique
F1438-93R05 Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
F1451 Test Method for Measuring Sori on Silicon Wafers by Automated Noncontact Scanning
F1466-99R05 Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
F1467-99R05 Guide for Use of an X-Ray Tester (|mF10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits
F1512-94R03 Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies
F1513-99R03 Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications
F1526 Test Method for Measuring Surface Metal Contamination on Silicon Wafers by Total Reflection X-Ray Fluorescence Spectroscopy
F1527 Guide for Application of Certified Reference Materials and Reference Wafers for Calibration and Control of Instruments for Measuring Resistivity of Silicon
F1528 Test Method for Measuring Boron Contamination in Heavily Doped -Type Silicon Substrates by Secondary Ion Mass Spectrometry
F1529 Test Method for Sheet Resistance Uniformity Evaluation by In-Line Four-Point Probe with the Dual-Configuration Procedure
F1530 Test Method for Measuring Flatness, Thickness, and Thickness Variation on Silicon Wafers by Automated Noncontact Scanning
F1535 Test Method for Carrier Recombination Lifetime in Silicon Wafers by Noncontact Measurement of Photoconductivity Decay by Microwave Reflectance
F1569 Guide for Generation of Consensus Reference Materials for Semiconductor Technology
F1570-01E01 Test Method for Determining the Tactile Ratio of a Membrane Switch
F1578-01 Practice for Contact Closure Cycling of a Membrane Switch
F1593-97R02 Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
F1594-95R03 Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications
F1595-00 Practice for Viewing Conditions for Visual Inspection of Membrane Switches
F1596-00 Practice for Exposure of Membrane Switches to Temperature and Relative Humidity
F1597-02 Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch
F1598-95R02 Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)
F1617 Test Method for Measuring Surface Sodium, Aluminum, Potassium, and Iron on Silicon and EPI Substrates by Secondary Ion Mass Spectrometry
F1618 Practice for Determination of Uniformity of Thin Films on Silicon Wafers
F1619 Test Method for Measurement of Interstitial Oxygen Content of Silicon Wafers by Infrared Absorption Spectroscopy with -Polarized Radiation Incident at the Brewster Angle
F1620 Practice for Calibrating a Scanning Surface Inspection System Using Monodisperse Polystyrene Latex Spheres Deposited on Polished or Epitaxial Wafer Surfaces
F1621 Practice for Determining the Positional Accuracy Capabilities of a Scanning Surface Inspection System
F1630 Test Method for Low Temperature FT-IR Analysis of Single Crystal Silicon for III-V Impurities
F1661-96R02 Test Method for Determining the Contact Bounce Time of a Membrane Switch
F1662-04 Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
F1663-95R02 Test Method for Determining the Capacitance of a Membrane Switch
F1680-02 Test Method for Determining Circuit Resistance of a Membrane Switch
F1681-96R02 Test Method for Determining Current Carrying Capacity of a Conductor as Part of a Membrane Switch Circuit
F1682-02 Test Method for Determining Travel of a Membrane Switch
F1683-02 Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component
F1684-99R05E01 Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
F1689-02 Test Method for Determining the Insulation Resistance of a Membrane Switch
F1708 Practice for Evaluation of Granular Polysilicon by Melter-Zoner Spectroscopies
F1709-97R02 Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications
F1710-97R02 Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
F1711-96R02 Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method
F1723 Practice for Evaluation of Polycrystalline Silicon Rods by Float-Zone Crystal Growth and Spectroscopy
F1724 Test Method for Measuring Surface Metal Contamination of Polycrystalline Silicon by Acid Extraction-Atomic Absorption Spectroscopy
F1725 Guide for Analysis of Crystallographic Perfection of Silicon Ingots
F1726 Guide for Analysis of Crystallographic Perfection of Silicon Wafers
F1727 Practice for Detection of Oxidation Induced Defects in Polished Silicon Wafers
F1761-00 Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets
F1762-02 Practice for Exposing a Membrane Switch to Variation in Atmospheric Pressure
F1763 Test Methods for Measuring Contrast of a Linear Polarizer
F1771 Test Method for Evaluating Gate Oxide Integrity by Voltage Ramp Technique
F1809 Guide for Selection and Use of Etching Solutions to Delineate Structural Defects in Silicon
F1810 Test Method for Counting Preferentially Etched or Decorated Surface Defects in Silicon Wafers
F1811 Practice for Estimating the Power Spectral Density Function and Related Finish Parameters from Surface Profile Data
F1812-02 Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding
F1842-02 Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications
F1843-97R02 Practice for Sample Preparation of Transparent Plastic Films for Specular Gloss Measurements, on Membrane Switch Overlays
F1844-97R02 Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage
F1845-97R02 Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer
F1892-04 Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices
F1893-98R03 Guide for Measurement of Ionizing Dose-Rate Burnout of Semiconductor Devices
F1894-98R03 Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness
F1895-98R04 Practice for Submersion of a Membrane Switch
F1896-98R04 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
F1982 Test Methods for Analyzing Organic Contaminants on Silicon Wafer Surfaces by Thermal Desorption Gas Chromatography
F1995-00 Test Method for Determining the Bond Strength of a Surface Mount Device (SMD) on a Membrane Switch by Applying Shear Force
F1996-01 Test Method for Silver Migration for Membrane Switch Circuitry
F1997-99R05 Test Method for Determining the Sensitivity (Teasing) of a Tactile Membrane Switch
F2072-01 Practice for Hosedown of a Membrane Switch
F2073-01 Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch
F2074 Guide for Measuring Diameter of Silicon and Other Semiconductor Wafers
F2086-01 Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets, Method 2
F2112-02 Terminology for Membrane Switches
F2113-01E01 Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applications
F2114-02 Guide for ASTM Standard Test Methods, Standard Practices, and Typical Values of a Membrane Switch
F2139 Test Method for Measuring Nitrogen Concentration in Silicon Substrates by Secondary Ion Mass Spectrometry
F2166 Practices for Monitoring Non-Contact Dielectric Characterization Systems Through Use of Special Reference Wafers
F2187-02 Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
F2188-02 Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
F2357-04 Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool |P`RCA|P' Abrader
F2358-04 Guide for Measuring Characteristics of Sapphire Substrates
F2359-04 Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source
F2360-04 Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
F2405-04 Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
|
||
|
|
|