Nissan Qashqai (2007-2010). Manual - part 1062

DIAGNOSIS SYSTEM (BCM)

DLK-327

< FUNCTION DIAGNOSIS >

[WITH I-KEY & SUPER LOCK]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

DATA MONITOR

*1

: For the Intelligent key equipped vehicle.

*2

: For the multi remote control system equipped vehicle.

ACTIVE TEST

:

*1

 For the super lock equipped vehicle. 

WORK SUPPORT

Diagnosis mode

Function Description

WORK SUPPORT

Changes the setting for each system function.

DATA MONITOR

The BCM input/output signals are displayed.

ACTIVE TEST

The signals used to activate each device are forcibly supplied from BCM.

Monitor Item

Condition

IGN ON SW

Indicates [ON/OFF] condition of ignition switch in ON position.

ACC ON SW

Indicates [ON/OFF] condition of ignition switch in ACC position.

PUSH SW

*1

Indicates [ON/OFF] condition of ignition knob switch.

KEY ON SW

Indicates [ON/OFF] condition of key switch.

CDL LOCK SW

Indicates [ON/OFF] condition of door lock and unlock switch.

CDL UNLOCK SW

Indicates [ON/OFF] condition of door lock and unlock switch.

DOOR SW-DR

Indicates [ON/OFF] condition of front door switch (driver side).

DOOR SW-AS

Indicates [ON/OFF] condition of front door switch (passenger side).

DOOR SW-RR

Indicates [ON/OFF] condition of rear door switch RH.

DOOR SW-RL

Indicates [ON/OFF] condition of rear door switch LH.

BACK DOOR SW

Indicates [ON/OFF] condition of back door switch.

KEYLESS LOCK

*2

Indicates [ON/OFF] condition of lock signal from key fob.

KEYLESS UNLOCK

*2

Indicates [ON/OFF] condition of unlock signal from key fob.

I-KEY LOCK

*1

Indicates [ON/OFF] condition of lock signal from Intelligent Key.

I-KEY UNLOCK

*1

Indicates [ON/OFF] condition of unlock signal from Intelligent Key.

UNLOCK WITH DR

This item is indicated, but not monitored.

UNLOCK SHOCK

Indicates [ON/OFF] condition of signal from air bag diagnosis unit.
• ON: During the unlock operation interlock with air bag.
• OFF: Other than above.

SHOCK SENSOR

Indicates [NOMAL/ON/OFF] condition of circuit between BCM and air bag diagnosis sen-
sor unit.
• NORMAL: Ignition switch ON. (BCM is receiving normal condition signal from air bag di-

agnosis sensor unit.)

• ON: During the receiving of air bag deployment signal from air bag diagnosis sensor 

unit.

• OFF: After the receiving of air bag deployment signal from air bag diagnosis sensor unit.

VEHICLE SPEED

Displays the vehicle speed signal received from combination meter by numerical value 
[km/h].

Test item

Description

SUPER LOCK

*1

This test is able to check super lock operation [LOCK (SET)/UNLOCK (RELEASE)]. 

DOOR LOCK IND

This test is able to check door lock indicator (built in door lock and unlock switch on center 
console) operation [ON/OFF].

DOOR LOCK

This test is able to check door lock operation [ALL LOCK/ALL UNLOCK/DR UNLOCK/
OTHER UNLOCK].

DLK-328

< FUNCTION DIAGNOSIS >

[WITH I-KEY & SUPER LOCK]

DIAGNOSIS SYSTEM (BCM)

INTELLIGENT KEY

INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)

INFOID:0000000001097287

BCM CONSULT-III FUNCTION

CONSULT-III performs the following functions via CAN communication with BCM.

DATA MONITOR

TRUNK

TRUNK : CONSULT-III Function (BCM - TRUNK)

INFOID:0000000001097288

APPLICATION ITEM

CONSULT-III performs the following functions via CAN communication with BCM.

DATA MONITOR

*1

: For the Intelligent key equipped vehicle.

*2

: For the remote keyless entry system equipped vehicle.

ACTIVE TEST

Test item

Description

SECURITY DOOR LOCK SET

Anti hijack function mode can be changed in this mode.
• ON: Anti hijack mode is active.
• OFF: Anti hijack mode is inactive.

Diagnosis mode

Function Description

DATA MONITOR

The BCM input/output signals are displayed.

Monitor Item

Condition

IGN ON SW

Indicates [ON/OFF] condition of ignition switch in ON position.

ACC ON SW

Indicates [ON/OFF] condition of ignition switch in ACC position.

KEY ON SW

Indicates [ON/OFF] condition of key switch.

PUSH SW

Indicates [ON/OFF] condition of ignition knob switch.

I-KEY LOCK

Indicates [ON/OFF] condition of lock signal from Intelligent Key.

I-KEY UNLOCK

Indicates [ON/OFF] condition of unlock signal from Intelligent Key.

Diagnosis mode

Function Description

DATA MONITOR

The BCM input/output signals are displayed.

ACTIVE TEST

The signals used to activate each device are forcibly supplied from Intelligent Key unit.

Monitor Item

Condition

IGN ON SW

Indicates [ON/OFF] condition of ignition switch in ON position.

KEY ON SW

Indicates [ON/OFF] condition of key switch.

PUSH SW

*1

Indicates [ON/OFF] condition of ignition knob switch.

TRNK OPNR SW

Indicates [ON/OFF] condition of back door opener switch.

VEHICLE SPEED

Displays the vehicle speed signal received from combination meter by numerical value 
[km/h].

Test item

Description

TRUNK/GLASS HATCH

This test is able to check back door opener operation [ON/OFF]. 

DIAGNOSIS SYSTEM (INTELLIGENT KEY UNIT)

DLK-329

< FUNCTION DIAGNOSIS >

[WITH I-KEY & SUPER LOCK]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

DIAGNOSIS SYSTEM (INTELLIGENT KEY UNIT)

CONSULT-III Function (INTELLIGENT KEY)

INFOID:0000000001097289

APPLICATION ITEM

CONSULT-III performs the following functions via CAN communication with Intelligent Key unit.

WORK SUPPORT

SELF-DIAG RESULT

Refer to 

DLK-472, "DTC Index"

.

DATA MONITOR

Diagnosis mode

Function Description

WORK SUPPORT

Changes the setting for each system function.

SELF-DIAG RESULTS

Displays the diagnosis results judged by Intelligent Key unit.

CAN DIAG SUPPORT MNTR

Monitors the reception status of CAN communication viewed from Intelligent Key unit.

DATA MONITOR

The Intelligent Key unit input/output signals are displayed.

ACTIVE TEST

The signals used to activate each device are forcibly supplied from Intelligent Key unit.

ECU IDENTIFICATION

The Intelligent Key unit part number is displayed.

Support item

Description

Selection item

Condition

CONFIRM KEY FOB ID

It can check whether Intelligent Key ID code 
is registered or not.

—

—

TAKE OUT FROM WINDOW WARN

Take away warning chime (from window) 
mode can be changed.

ON

Active

OFF

Inactive

LOW BATT OF KEY FOB WARN

Intelligent Key low battery warning mode can 
be changed.

ON

Active

OFF

Inactive

KEYLESS FUNCTION

Door lock function with Intelligent Key can be 
changed.

ON

Active

OFF

Inactive

ANSWER BACK FUNCTION

Buzzer reminder operation can be changed.

ON

Active

OFF

Inactive

SELECTIVE UNLOCK FUNCTION

Anti-hijack mode can be changed.

ON

Active

OFF

Inactive

HAZARD ANSWER BACK

Hazard reminder operation mode can be 
changed.

Refer to 

DLK-322

.

ANSWER BACK WITH I-KEY LOCK

Buzzer reminder operation (lock operation) 
mode by each door request switch can be 
changed. 

BUZZER

Active

OFF

Inactive

ANSWER BACK WITH I-KEY UNLOCK

Buzzer reminder operation (unlock operation) 
mode by each door request switch can be 
changed.

BUZZER

Active

OFF

Inactive

AUTO RELOCK TIMER

Auto door lock operation mode can be 
changed.

OFF

Inactive

2 min

Active

ENGINE START BY I-KEY

Engine start function (by Intelligent Key) 
mode can be changed. 

ON

Active

OFF

Inactive

LOCK/UNLOCK BY I-KEY

Door lock function by door request switch can 
be changed. 

ON

Active

OFF

Inactive

DLK-330

< FUNCTION DIAGNOSIS >

[WITH I-KEY & SUPER LOCK]

DIAGNOSIS SYSTEM (INTELLIGENT KEY UNIT)

ACTIVE TEST

Monitor Item

Condition

PUSH SW

Indicates [ON (pressed)/OFF (released)] condition of ignition knob switch.

KEY SW

Indicates [ON (inserted)/OFF (removed)] condition of key switch.

DR REQ SW

Indicates [ON (pressed)/OFF (released)] condition of door request switch (driver side).

AS REQ SW

Indicates [ON (pressed)/OFF (released)] condition of door request switch (passenger 
side).

BD/TR REQ SW

Indicates [ON (pressed)/OFF (released)] condition of door request switch (back door).

IGN SW

Indicates [ON (ON or START position)/OFF (other than ON and START position)] con-
dition of ignition switch ON position.

ACC SW

Indicates [ON/OFF] condition of ignition switch ACC position.

STOP LAMP SW

Indicates [ON/OFF] condition of stop lamp switch.

DOOR LOCK SIG

Indicates [ON/OFF] condition of LOCK signal from Intelligent Key.

DOOR UNLOCK SIG

Indicates [ON/OFF] condition of UNLOCK signal from Intelligent Key.

DOOR SW DR

Indicates [OPEN/CLOSE] condition of front door switch (driver side) from BCM via CAN 
communication.

DOOR SW AS

Indicates [OPEN/CLOSE] condition of front door switch (passenger side) from BCM via 
CAN communication.

DOOR SW RR

Indicates [OPEN/CLOSE] condition of rear door switch (RH) from BCM via CAN com-
munication.

DOOR SW RL

Indicates [OPEN/CLOSE] condition of rear door switch (LH) from BCM via CAN com-
munication.

DOOR BK SW

Indicates [OPEN/CLOSE] condition of back door switch from BCM via CAN communi-
cation.

VEHICLE SPEED

Displays the vehicle speed signal received from combination meter by numerical value 
[km/h].

Test item

Description

DOOR LOCK/UNLOCK

This test is able to check door lock/unlock operation. 
• ALL UNLK: All door lock actuators are unlocked.
• DR UNLK: Door lock actuator (driver side) is unlocked.
• AS UNLK: Door lock actuator (passenger side) is unlocked.
• BK UNLK: This item is indicated, but inactive.
• LOCK: All door lock actuator is locked.

ANTENNA

This test is able to check Intelligent Key antenna operation. 
When the following condition are met, hazard warning lamps flash.
• ROOM ANT1: Inside key antenna (console) detects Intelligent Key, when “ROOM 

ANT1” is selected.

• ROOM ANT2: Inside key antenna (instrument center/rear seat) detects Intelligent 

Key, when “ROOM ANT2”is selected.

• DRIVER ANT: Outside key antenna (driver side) detects Intelligent Key, when “DRIV-

ER ANT” is selected.

• ASSIST ANT: Outside key antenna (passenger side) detects Intelligent Key, when 

“ASSIST ANT” is selected.

• BK DOOR ANT: Outside key antenna (rear bumper) detects Intelligent Key, when “BK 

DOOR ANT” is selected.

OUTSIDE BUZZER

This test is able to check Intelligent Key warning buzzer operation.
• ON
• OFF 

INSIDE BUZZER

This test is able to check warning chime in combination meter operation.
• TAKE OUT: Take away warning chime sounds.
• KNOB: Ignition knob switch warning chime sounds.
• KEY: Key warning chime sounds.
• OFF