Content .. 26 27 28

Hyundai Veloster (2019 year). Manual - part 28

RECOMMENDED LUBRICANTS AND CAPACITIES

To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality.

The correct lubricants also help promote engine efficiency that results in improved fuel economy.

Lubricant

Volume

Classification

Engine oil *1 *2 (drain and refill)

Gamma 1.6 T-GDI

4.76 US qt. (4.5 l)

ACEA A5/B5 *4

Recommends

API SM *3 & ILSAC GF-4 (or above)

Nu 2.0 MPI

4.23 US qt. (4.0 l)

ACEA A5/B5 *4

HK SYN MTF 70W (SK)

Gamma 1.6 T-GDI

1.8~1.9 US qt.

SPIRAX S6 GHME 70W MTF (H.K.SHELL)

Manual transmission fluid

(1.7 ~ 1.8 l)

GS MTF HD 70W (GS CALTEX)

Nu 2.0 MPI

(API GL-4, SAE 70W TGO-9)

MICHANG ATF SP-IV,

SK ATF SP-IV,

NOCA ATF SP-IV,

Automatic transmission fluid

Nu 2.0 MPI

7.08 US qt. (6.7 l)

HYUNDAI genuine ATF SP-IV or other

brands meeting the above specification

approved by HYUNDAI Motor Co.

HK SYN DCTF 70W (SK)

SPIRAX S6 GHME 70W DCTF

2.01~2.11 US qt.

Dual clutch transmission fluid

Gamma 1.6 T-GDI

(H.K.SHELL)

(1.9~2.0 l)

GS DCTF HD 70W (GS CALTEX)

(API GL-4, SAE 70W)

8-7

Specifications, Consumer information and Reporting safety defects

Lubricant

Volume

Classification

Gamma 1.6 T-GDI

7.5 US qt. (7.1 l)

Mixture of antifreeze and water

Coolant

(Phosphate-based Ethylene glycol coolant for alu-

Nu 2.0 MPI

6.8 US qt. (6.5 l)

minum radiator)

0.74~0.85 US qt.

Brake fluid

FMVSS116 DOT-3 or DOT-4

(0.7 ~ 0.8 l)

Fuel

13.2 US gal. (50 l)

Refer to "Fuel requirements" in the Foreword chapter.

*1 : Refer to the recommended SAE viscosity numbers on the next page.

*2 : Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel econ-

omy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure

in everyday driving, but in a year's time, they can offer significant cost and energy savings.

*3 : If the API service SM engine oil is not available in your country, you are able to use API service SL.

*4 : If the ACEA A5 engine oil is not available in your country, you are able to use ILSAC GF-3 (or above) or ACEA A3 (or above).

8-8

Recommended SAE viscosity

Engine oil viscosity (thickness) has an effect on fuel economy and cold

number

weather operating (engine start and engine oil flowability). Lower viscosity

engine oils can provide better fuel economy and cold weather performance,

however, higher viscosity engine oils are required for satisfactory lubrication

CAUTION

in hot weather.

Always be sure to clean the area

Using oils of any viscosity other than those recommended could result in

around any filler plug, drain

engine damage.

plug, or dipstick before check-

When choosing an oil, consider the range of temperature your vehicle will be

ing or draining any lubricant.

operated in before the next oil change. Proceed to select the recommended

This is especially important in

oil viscosity from the chart.

dusty or sandy areas and when

the vehicle is used on unpaved

Temperature Range for SAE Viscosity Numbers

roads. Cleaning the plug and

°C

-30

-20

-10

dipstick areas will prevent dirt

Temperature

(°F)

-10

100

120

and grit from entering the

20W-50

engine and other mechanisms

that could be damaged.

Gamma

15W-40

1.6 T-GDI *1

10W-30

Engine

5W-30, 5W-40

Oil

Nu 2.0

10W-30

MPI *2

5W-20, 5W-30

*1 :For better fuel economy, it is recommended to use the engine oil

of a viscosity grade SAE 5W-30 (ACEA A5/B5). However, if the

engine oil is not available in your country, select the proper

engine oil using the engine oil viscosity chart.

*2 :For better fuel economy, it is recommended to use the engine oil

of a viscosity grade SAE

5W-20 (API SM / ILSAC GF-4).

However, if the engine oil is not available in your country, select

the proper engine oil using the engine oil viscosity chart.

8-9

Specifications, Consumer information and Reporting safety defects

VEHICLE IDENTIFICATION NUMBER (VIN)

VEHICLE CERTIFICATION

■ Frame number

■ VIN label

LABEL

OJS088001

OJS088006L

The vehicle identification number

The VIN is also on a plate attached

OJS088002

(VIN) is the number used in register-

to the top of the dashboard. The

The vehicle certification label attached

ing your car and in all legal matters

number on the plate can easily be

on the driver's side center pillar gives

pertaining to its ownership, etc.

seen through the windshield from

the Vehicle Identification Number

outside.

The number is punched on the floor

(VIN).

under the passenger seat. To check

the number, open the cover.

8-10

TIRE SPECIFICATION AND

ENGINE NUMBER

REFRIGERANT LABEL

PRESSURE LABEL

■ Gamma 1.6 T-GDI

(IF EQUIPPED)

OJS088005

■ Nu 2.0 MPI

OJS088003

OJS088008N

The tires supplied on your new vehi-

The refrigerant label provides infor-

cle are chosen to provide the best

mation such as refrigerant type and

performance for normal driving.

amount.

The tire label located on the driver's

The label is located on the underside

side center pillar gives the tire pres-

of the hood.

sures recommended for your car.

OJS088007L

The engine number is stamped on

the engine block as shown in the

drawing.

8-11

Content .. 26 27 28