|
|
Circuit/System Description The steering angle sensor supplies input circuits to the electronic brake control module (EBCM) Conditions for Running the DTC The ignition is ON. Ignition voltage is greater than 9.5 volts. Conditions for Setting the DTC Opens, short to ground, or voltage on the analog signal circuits. The calculated steering angle from the steering angle sensor does not correlate with the Action Taken When the DTC Sets The EBCM disables the Vehicle Stability Enhancement System (VSES) for the duration of The driver information center (DIC) displays the Service Stability System message. The Antilock Brake System (ABS) remains functional. The VSES Caution indicator turns ON. Conditions for Clearing the DTC The condition for the DTC is no longer present. The EBCM automatically clears the history DTC when a current DTC is not detected in 100 Diagnostic Aids During diagnosis, park the vehicle on a level surface. Inspect the vehicle for proper alignment. The vehicle should not pull in either direction Find out from the customer the conditions under which the DTC was set. This information
2008 Chevrolet Silverado 1500 2008 BRAKES Antilock Brake System - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
|