|
|
Content .. 1198 1199 1200 1201 ..
Inspect the easily accessible or visible system components for obvious damage or conditions Symptom List Refer to a symptom diagnostic procedure from the following list in order to diagnose the Click Noise In Turns Clunk When Accelerating from Coast Clunk Noise When Accelerating During Turns CLICK NOISE IN TURNS CLUNK WHEN ACCELERATING FROM COAST Step Action Yes No DEFINITION: Clicking noise while turning in drive under load. 1 Check for worn or damaged outer CV joints. Go to Step 2 System OK 2 Replace the outer CV joints/seals. Refer to System OK - Step Action Value(s) Yes No DEFINITION: A clunking noise present when accelerating from coast to drive under load. 1 Check for a loose wheel drive shaft to hub - Go to Step 2 Go to Step 3 2 Tighten the wheel drive shaft to hub 240 N.m (177 lb ft) System OK - 3 Check for a damaged inner CV joint. - Go to Step 4 System OK 4 Replace the inner CV joint. Refer to - System OK -
2008 Chevrolet Silverado 1500 2008 DRIVELINE/AXLE Wheel Drive Shafts - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
|