|
|
– Remove the Steering Column Electronics Control Module - J527- -2- from the Steering Column Combination Switch - E595- . Installing the following: – Before sliding the Steering Column Electronics Control Mod‐ ule - J527- -3- the following must be checked. ♦ The “arrows” -1- must align. “arrows” -4-. – Make sure that all connectors are installed securely. ⇒ “8.1 Overview - Steering Column Switch Module”, 8.6.2 Steering Column Electronics Control Module - J527- , Removing and Instal‐ ling, Valeo The Airbag Spiral Spring/Return Spring with Slip Ring - F138- is integrated into the Steering Column Electronics Control Module - J527- . Tester and select the “Replacing” function for the respective con‐ trol module in “Guided Fault Finding”. is located in the neutral position. – Position the steering wheel as far back as possible. Use the entire adjustment range of the steering column adjustment for this. – Remove the steering wheel. Refer to ⇒ Suspension, Wheels, Steering; Rep. Gr. 48 ; Steering Wheel; Steering Wheel, Re‐ moving and Installing . – Remove the lower steering column trim panel. Refer to ⇒ Body Interior; Rep. Gr. 68 ; Storage Compartments and Covers; Lower Steering Column Trim Panel, Removing and Installing . |