|
|
– Pry the operating rod -4- on the ball joint from the motor crank -2- using the -80-200- . – Remove the nut -1-. shaft. – Remove the bolts -3-. wiper frame. Installing the following: - V- run into its end position. – Turn off the ignition. frame. – Install the bolts -3-. joint. – Install the windshield wiper frame. Refer to ⇒ “1.6 Windshield Wiper Motor V , Removing and Installing”, Tightening Specifications ⇒ “1.1.2 Overview - Windshield Wiper Motor and Windshield 1.8 Windshield Wiper Motor, Deactivating Alternating Park Position Function Windshield wiper system is equipped with APP function (alter‐ nating park position). off to move upward slightly after reaching the lowest position. is necessary to shut off the Windshield Wiper Motor - V- in the lowest park position. APP function must be deactivated to ensure this. This applies to Windshield Wiper Motor - V- in which the APP |