Volkswagen Golf / Golf GTI / Golf Variant. Service manual - part 330

1 - Name Badge

❑ Model name

2 - Name Badge

❑ Engine designation or

technical designation

3 - Height Dimension

❑ Engine designation

50.5 ± 1 mm, from the up‐

per edge of the name

badge to the tail lamp

lower edge

❑ Technical designations

75.5 ± 1 mm, from the

lower edge of the name

badge to the tail lamp

lower edge

❑ Additional designations

(only in conjunction with

the engine designation)

6.0 ± 1 mm, from the up‐

per edge of the additional

designation to the lower

edge of the engine des‐

ignation

4 - Side Dimension

❑ 29.1 ± 1 mm, from the

outer edge of the rear lid

to the outer panel name

badge

5 - Side Dimension

❑ 26.8 ± 1 mm, from the

outer edge of the rear lid

to the outer panel name

badge

6 - Height Dimension

❑ 75.5 ± 1 mm, from the lower edge of the name badge to the tail lamp lower edge

9.1.2

Dimensions - Name Badge on the Rear Lid, GTI

Note

Follow the assembly instructions when installing the name badges. Refer to 

⇒ page 457

 .

1 - Name Badge

❑ Model name

2 - Height Dimension

❑ 75.5 ± 1 mm, from the

lower edge of the name

badge to the tail lamp

lower edge

3 - Side Dimension

❑ 26.8 ± 1 mm, from the

outer edge of the rear lid

to the outer panel name

badge

9.2

Dimensions - Fender Name Badges and Emblems

Note

Follow the assembly instructions when installing the name badges. Refer to 

⇒ page 457

 .

1 - Emblem
2 - Height Dimension

❑ 5.0 ± 1 mm, from the

name badge upper

edge to the fender edge

3 - Side Dimension

❑ 1.5 ± 1 mm, from the

fender outer edge to the

name badge rear edge

9.3

Front Emblems, Removing and Instal‐

ling

⇒ “9.3.1 Front Emblem, Removing and Installing, Brand Emblem”,

page 454
⇒ “9.3.2 Front Emblem, Removing and Installing, Model Name

GTI”, page 456

9.3.1

Front Emblem, Removing and Installing, Brand Emblem

Note

The brand emblem cannot be removed without damaging it.

Removing

– Using a screwdriver -3-, carefully pry the brand emblem -1- out

of the radiator grille -2- in the direction of -arrow A-

Installing
– Press the brand emblem -1- on the radiator grille -2- until it

engages audibly -arrow B-.