|
|
DTC / Descrip‐ tion Monitor Strategy Descrip‐ tion Malfunction Crite‐ ria and Threshold Value Secondary Parame‐ ters with Enable Conditions Monitoring Time Length MIL Il‐ lum. Component Diag‐ nostic Procedure P013E O2 Sen‐ sor De‐ layed Re‐ sponse - Rich to Lean Bank 1 Sensor 2 Oxygen Sensors Rear De‐ layed Re‐ sponse Monitor‐ ing, De‐ lay Meas‐ urement • Sensor signal delay time > 1.0 s • General condi‐ tions: • Forced close the gap stimulation not active • Close the gap stimulation re‐ quest active • Vehicle speed >= 6 mph • Catalyst over‐ heating protec‐ tion not active • Turbine over‐ heating protec‐ tion not active • O2S rear ready head > 60° C • Modeled catalyst temperature 470 –780° C • Difference be‐ tween dynamic and stationary catalyst tempera‐ ture -306 – 304° C • Modeled catalyst temperature once after engine start > 550° C • Integrated MAF, catalyst temp. conditions fulfil‐ led >= 0.0 g • Modeled EGT @ O2S rear <= 900° C • MAF per cylinder 30.0 – 200.0 kg/h • MAF per cylinder per stroke, lower range >= 89.99 mg/rev • MAF per cylinder per stroke, upper range <= 750.0 mg/rev • And • 60.0 – 70.0 s • Once / DCY • 1 DCY – Check the Oxy‐ gen Sensor 1 Af‐ ter Catalytic Converter - GX7- . Refer to GTI 2014 ➤ Generic Scan Tool - Edition 04.2015 3. Diagnosis and Testing 73 |