|
|
|
* STEERING UNIFORM INSPECTION GUIDELINES * ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ CONTROL ARM SHAFTS CONTROL ARM SHAFTS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Condition ³ Code ³ Procedure ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Attaching hardware broken ³ A ³ Require replacement of broken
³
³ part, if available; otherwise,
³
³ replace shaft. Attaching hardware loose ³ A ³ Require repair or replacement of
³
³ loose part, if available;
³
³ otherwise, replace shaft. Attaching hardware missing ³ C ³ Require replacement of missing
³
³ part, if available; otherwise,
³
³ replace shaft. Attaching hardware threads ³ A ³ Require repair or replacement of damaged ³
³ part with damaged threads, if
³
³ available; otherwise, replace
³
³ shaft. Attaching hardware threads ³ A ³ Require replacement of part with stripped (threads missing) ³
³ stripped threads, if available;
³
³ otherwise, replace shaft. Bent ³ B ³ Require replacement. Shaft bushing surface ³ B ³ Require replacement. undersized (worn) ³
³ Threads damaged ³ A ³ Require repair or replacement. Threads stripped ³ A ³ Require replacement. (threads missing) ³
³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ CONTROL ARMS CONTROL ARMS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Condition ³ Code ³ Procedure ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Attaching hardware bent ³ B ³ Require repair or replacement of
³
³ bent part, if available;
³
³ otherwise, replace control arm. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Attaching hardware broken ³ A ³ Require replacement of broken
³
³ part, if available; otherwise,
³
³ replace control arm. |