|
|
EN(H4SO 2.5)(diag)-25 ENGINE (DIAGNOSTICS) Subaru Select Monitor 9. Subaru Select Monitor A: OPERATION 1. HOW TO USE SUBARU SELECT MONI- 1) Prepare the Subaru Select Monitor kit. <Ref. to 2) Connect the diagnosis cable to Subaru Select 4) Connect the Subaru Select Monitor to data link (1) Data link connector is located in the lower (2) Connect the diagnosis cable to data link CAUTION: 5) Turn the ignition switch to ON (engine OFF), and 6) Using the Subaru Select Monitor, call up DTC 2. READ DIAGNOSTIC TROUBLE CODE Refer to “Read Diagnostic Trouble Code (DTC)” for 3. READ DIAGNOSTIC TROUBLE CODE Refer to “Read Diagnostic Trouble Code (DTC)” for EN-00038 EN-00039 EN-02533 (A) Power switch (A) EN-00040 |