SsangYong: Engine Euro 4. Service manual - part 107

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

24

DIAGNOSIS

CCCS

• When the seat tilts (front part of the seat

bottom)upward

• Battery level when operating

• Ground level when not operating

However, when the recliner motor is operated
by the driver side switch operation, this infor-
mation does not appear on the ECU. It is be-
cause the switch drives the motor directly. For
more information, go to "Easy access and
memory switch operation" where ECU internal
software drives the motor directly.

• When the seat (forward/backward movement

of seat) slides backward

• Battery level when operating

• Ground level when not operating

However, when the recliner motor is operated
by the driver side switch operation, this infor-
mation does not appear on the ECU. It is be-
cause the switch drives the motor directly. For
more information, go to "Easy access and
memory switch operation" where ECU internal
software drives the motor directly.

• When the seat (forward/backward movement

of seat) slides forward

• Battery level when operating

• Ground level when not operating

However, when the recliner motor is operated
by the driver side switch operation, this infor-
mation does not appear on the ECU. It is be-
cause the switch drives the motor directly. For
more information, go to "Easy access and
memory switch operation" where ECU internal
software drives the motor directly.

• Sensor value when seat slides (forward or

backward movement of the seat) is moving

• Sensor value when moving forward: Increase

• Sensor value when moving backward: Decrease

• Sensor value when seat tilting (front part of

the seat bottom) is moving

• Sensor value when moving upward: Increase

• Sensor value when moving downward: Decrease

• Sensor value when seat height (rear part of

the seat bottom) is moving

• Sensor value when moving upward: Increase

• Sensor value when moving downward: Decrease

• Sensor value when seat recliner (seatback)

is moving

• Sensor value when moving forward: Increase

• Sensor value when moving backward: Decrease

Operating

No.

Sensor value item

Information

Help

Input/

Output

Not

operating

GND

12 V

Driver side seat
tilt-up MTR

Output

14

Driver side seat

slide-backward

MTR

Output

Operating

Not

operating

GND

12 V

15

Driver side seat

slide-forward MTR

Output

Operating

Not

operating

GND

12 V

16

Driver side seat
slide sensor value

Output

17

Driver side seat
tilting sensor value

Input

18

Driver side seat
height sensor
value

Input

19

Driver side
seatback sensor
value

Input

20

Sensor value

Sensor value

Sensor value

Sensor value

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

25

DIAGNOSIS

CCCS

BRAKE

ECU

TCU

A/BAG

TC

RK-STICS

FFH

R/SENSOR

FA

T

C

TGS-LEVER

P/TRUNK

CCCS

DIAGNOSIS OF ESIMS

Code

Malfunction

Help

- ESIMS continuously monitors the sensor values when the driver operates the steer-

ing column or the steering column is in motion. When the teering wheel column
operation is engaged but the sensor value remains unchanged, the motor or the
sensor may be malfunction.

-  Measure the sensor values and check the relevant position

• Steering column tilt-up (ESIMS sensor value: No. 1)

• Steering column tilt-down (ESIMS sensor value: No. 2)

• Steering column tilt-up motor (ESIMS sensor value: No. 13)

• Steering column tilt-down motor (ESIMS sensor value: No. 14)

- ESIMS continuously monitors the sensor values when the driver operates the steer-

ing column or the steering column is in motion. When the steering wheel column
operation is engaged but the sensor value remains unchanged, the motor or the
sensor may be malfunction.

- Measure the sensor values and check the relevant position

• Steering column tilt-up (ESIMS sensor value: No. 3)

• Steering column tilt-down (ESIMS sensor value: No. 4)

• Steering column tilt-up motor (ESIMS sensor value: No. 15)

• Steering column tilt-down motor (ESIMS sensor value: No. 16)

- ESIMS continuously monitors the sensor values when the driver adjusts the

inside rearview mirror horizontally or the inside rearview mirror is in motion.
When the inside rearview mirror horizontal operation is engaged but the sensor
value remains unchanged, the motor or the sensor may be malfunction.

- Measure the sensor values and check the relevant position

• Inside rearview mirror moves right (ESIMS sensor value: No. 5)

• Inside rearview mirror moves left (ESIMS sensor value: No. 6)

• Inside rearview mirror left movement motor (ESIMS sensor value: No. 11)

• Inside rearview mirror right movement motor (ESIMS sensor value: No. 12)

- ESIMS continuously monitors the sensor values when the driver adjusts the

inside rearview mirror vertically or the inside rearview mirror is in motion. When
the inside rearview mirror vertical operation is engaged but the sensor value
remains unchanged, the motor or the sensor may be malfunction.

- Measure the sensor values and check the relevant position

• Inside rearview mirror moves down (ESIMS sensor value: No. 7)

• Inside rearview mirror moves up (ESIMS sensor value:   No. 8)

• Inside rearview mirror down movement motor (ESIMS sensor value: No. 10)

• Inside rearview mirror up movement motor (ESIMS sensor value: No. 9)

0 X 81

Defective  steering  col-
umn tilt

• When it’s operated continuously at the stall position, it can be recog-

nized as an error and the motor may not respond. You should erase the
stored errors then test the inside rearview mirror from the mid position.

NOTE

0 X 82

Defective  steering  col-
umn telescope

0 X 83

Defective inside rearview
mirror left or right move-
ment

0 X 84

Defective  inside  rear-
view mirror up or down
functions

• When it’s operated continuously at the stall position, it can be recog-

nized as an error and the motor may not respond. You should erase the
stored errors then test the inside rearview mirror from the mid position.

NOTE

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

26

DIAGNOSIS

CCCS

ESIMS Input / Output Data

1. A driver operates the tilt switch at the steering col-

umn upward

2. Ground level when operating
3. Vcc level when not operating
1. A driver operates the tilt switch at the steering col-

umn downward

2. Ground level when operating
3. Vcc level when not operating
1. A driver operates the telescopic switch on the steer-

ing column toward extract

2. Ground level when operating
3. Vcc level when not operating
1. A driver operates the telescopic switch on the steer-

ing column toward retract

2. Ground level when operating
3. Vcc level when not operating
1. A driver presses the right side of the mirror opera-

tion switch when the mirror selector switch is in
the neutral position (center) (at this moment, the
mirror can be adjusted)

2. Ground level when operating
3. Vcc level when not operating
4. When this switch is detected, the mirror moves right

(*Note: The mirror operates when the ignition switch
is in ACC or other position)

5. Receives CAN data from DICS-Main
1. A driver presses the left part of the mirror operation

switch when the mirror selector switch is in center
position (at this moment, the mirror can be adjusted)

2. Ground level when operating
3. Vcc level when not operating
4. When this switch is detected, the mirror moves left

(*Note: The mirror operates when the ignition switch
is in ACC or other position)

5. Receives CAN data from DICS-Main
1. A driver presses the lower part of the mirror opera-

tion switch when the mirror selector switch is in
center position (at this moment, the mirror can be
adjusted)

2. Ground level when operating
3. Vcc level when not operating
4. When this switch is detected, the mirror tilts down

(*Note: The mirror operates if ignition switch is in
ACC or more)

5. Receives CAN data from DICS-Main
1. A driver presses the upper part of the mirror opera-

tion switch when the mirror selector switch is in
center position (at this moment, the mirror can be
adjusted)

2. Ground level when operating
3. Vcc level when not operating
4. When this switch is detected, the mirror tilts up

(*Note: The mirror operates if ignition switch is in
ACC or more)

5. Receives CAN data from DICS-Main

1

2

3

4

5

6

7

8

Steering wheel tilt-up
switch

Steering wheel tilt-
down switch

Steering wheel
telescope up switch

Steering wheel
telescope down switch

Inside rearview mirror
right moving switch

Inside rearview mirror
left moving switch

Inside rearview mirror
down moving switch

Inside rearview mirror
up moving switch

Not

operating

Not

operating

Not

operating

Not

operating

Not

operating

Not

operating

Not

operating

Not

operating

Operating

Operating

Detected

Operating

Operating

Detected

Operating

Operating

Input

Input

Input

Input

Input

Input

Input

Input

No.

Sensor value item

Information

Help

Input/

Output

GND

GND

GND

GND

GND

GND

GND

GND

Vcc

Vcc

Vcc

Vcc

Vcc

Vcc

Vcc

Vcc

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

27

DIAGNOSIS

CCCS

BRAKE

ECU

TCU

A/BAG

TC

RK-STICS

FFH

R/SENSOR

FA

T

C

TGS-LEVER

P/TRUNK

CCCS

Sensor value

Sensor value

Sensor value

Sensor value

1. When the mirror (motor for vertical movement) is

moving upward

2. Battery level when operating

3. Ground level when not operating

1. When the mirror (motor for vertical movement) is

moving downward

2. Battery level when operating

3. Ground level when not operating

1. When the mirror (motor for vertical movement) is

moving downward

2. Battery level when operating

3. Ground level when not operating

1. When the mirror (motor for horizontal movement) is

moving right side

2. Battery level when operating

3. Ground level when not operating

1. When the tilt motor on the steering column is

moving upward

2. Battery level when operating

3. Ground level when not operating

1. When the tilt motor on the steering column is moving

downward

2. Battery level when operating

3. Ground level when not operating

1. When the telescopic motor on the steering column

is moving towards the driver

2. Battery level when operating

3. Ground level when not operating

1. When the telescopic motor on the steering column

is moving away from the driver

2. Battery level when operating

3. Ground level when not operating

1. Sensor value when the tilt motor on the steering

column is moving up/down

2. Sensor value when moving up: Decrease

3. Sensor value when moving down: Increase

1. Sensor value when the telescopic motor on the

steering column is moving up/down

2. Sensor value when moving long extraction

: Decrease

3. Sensor value when moving short retraction

: Increase

1. Sensor value when the longitudinal motor in the

mirror moves left or right

2. Sensor value when moving toward right: Increase

3. Sensor value when moving toward left: Decrease

1. Sensor value when the vertical motor in the mirror

moves up or down

2. Sensor value when moving upward: Increase

3. Sensor value when moving downward: Decrease

9

10

11

12

13

14

15

16

17

18

19

20

Inside rearview mirror
up motor

Inside rearview mirror
down motor

Inside rearview mirror
left moving motor

Inside rearview mirror
right moving motor

Steering wheel tilt-up
motor

Steering wheel tilt-
down motor

Steering wheel
telescope up MTR

Steering wheel
telescope down MTR

Steering wheel
column tilting sensor

Steering wheel
column telescope
sensor

Inside rearview mirror
left and right movement
sensor

Inside rearview mirror
up and down
movement sensor

Not

operating

Not

operating

Not

operating

Not

operating

Not

operating

Not

operating

Not

operating

Not

operating

Operating

Operating

Operating

Operating

Operating

Operating

Operating

Operating

Output

Output

Output

Output

Output

Output

Output

Output

Input

Input

Input

Input

No.

Sensor value item

Information

Help

Input/

Output

12 V

12 V

12 V

12 V

12 V

12 V

12 V

12 V

GND

GND

GND

GND

GND

GND

GND

GND