SsangYong Rexton. Service manual - part 119

DI10-81

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

DIAGNOSIS

DI ENG SM - 2004.4

Trouble Code and Symptom

Diagnosis Procedures

Barometric Sensor Malfunction
(Out of range, using strategy of
restoring by MAP sensor)

Low Signal

High Signal

Supply Voltage

Trouble Code

Symptom

P1107

P1108

P1105

Replace ECU

DI10-82

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

DIAGNOSIS

DI ENG SM - 2004.4

Not operatable.

Injector #1 resistance fault. Use estimate resis-

tance level.

Injector #2 resistance fault. Use estimate resis-

tance level.

Injector #4 resistance fault. Use estimate resis-

tance level.

Injector #5 resistance fault. Use estimate resis-

tance level.

Injector #3 resistance fault. Use estimate resis-

tance level.

Unable EGR control (Air Flow)

Unable RPC trim problem detection

Unable HP leak detection

Unable accelerometer learing strategy

MIL ON

Operating limited rail pressure mode

TBD

Trouble Code and Symptom

Battery Voltage Monitoring Signal
Malfunction

Low Signal

High Signal

Supply Voltage

Trouble Code

Symptom

P0562

P0563

P0560

DI10-83

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

DIAGNOSIS

DI ENG SM - 2004.4

Diagnosis Procedures

YES

YES

YES

YES

Key ON and check battery

voltage

Battery Problem?

Check battery wiring

NO

Battery Wiring Problem?

Check ECU wiring

NO

Wiring Problem?

Charge battery, check wiring

Charge battery, wiring problem

NO

Replace ECU

Charge

battery

Repair or

replace

Repair or

replace

Repair or

replace

NO

Check resistance of body

ground and ECU ground

High Resistance

YES

Repair ECU

ground

DI10-84

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

DIAGNOSIS

DI ENG SM - 2004.4

Trouble Code and Symptom

Diagnosis Procedures

1. Diagnosis Procedures (Boost Pressure)

Booster Pressure Sensor Malfunction
(Out of range with Key ON)

Low

High

Trouble Code

Symptom

P0109

P0106

Location demand=change the boost control to

O.L. mode at f (boost demand, engine cycling speed)

YES

Read DTC

Booster Pressure Problem?

Check air line malfunction:

* VGT/Turbo. * Air filter.

* Vacuum line. * Vacuum pump.

* Solenoid valve open.

* Vane condition.

* Air inlet valve function

NO

Repiar Completed

Refer to Diagnosis Tree “Check sensor(1)”